(408) 828-4387 * ELECTRONICS ENGINEERING TECHNICIAN Vision-driven, solutions-oriented engineering technician skilled in assembling f rom the ground up, evaluation testing and troubleshooting sophisticated prototyp es including electro-mechanical and robotic. Broad-based history and in-depth technical acumen encompassing assembly, testing and repair / upgrading of complex automation and testing equipment. Adept at id entifying and reporting on shortfalls in engineering prototypes. Well-versed in a breadth of assembly and testing tools and methodologies. Highly skilled at tro ubleshooting electronic circuits to the component level. Strong communication an d presentation skills with excellent capacity for training users of newly instal led equipment at customer sites. EXPERIENCE: 11/24/08 - 2/20/09 Willow Garage (Through Benchmark Staffing, Santa Clara, CA) Electro-mechanical Technician Assembly and testing of precision robotic components 9/11/06 - 10/31/2008 Xyratex San Jose, CA Contract Electronics Engineering Technician for R & D Technical; working on a va riety of projects, assembling, testing, and troubleshooting multi-axis complex f actory automation equipment prototypes. Projects included: Assembly, testing and helped installion of complex 4ft x 4ft pneumatic End Effe ctor on a large Kuka pallet-loader robot (capable of handling 600 lb. payloads). Multi-robot System with three robots; one two-axis, one 4-axis, and one single-a xis. System Loads disks from cassettes into a pallet for sputtering. Includes ro tating theta Axis with four mandrels for loading/unloading disks. Also performed particle testing of subsystems in a mini-cleanroom environment test chamber. Assembly of complex End Effector for handling disk drive platter disks in roboti c system for moving disks to and from ten Read-Write testers. * Performed on-site training at factory in Malaysia. * Performed on-site training at customer facility in Singapore. * Performed Particle Testing in house in Class-1 Mini-Environment. 7/2005 - 3/2006 Reflectivity Sunnyvale, CA Electronics Engineering Technician Contract Engineering Tech for Ryzen Solutions; assembling, testing and troublesh ooting complex Test machines with little or no supervision. Working from schemat ics that often were "in progress", worked with one team partner to build machine s used in the manufacture and testing of DLP chips (micro-mirror array video chi p) used in high resolution projectors. Machines built included a process chamber machine, a chip sealing machine, a three axis chip inspection machine that util ized an x/y stage to position devices underneath an inspection camera equipped w ith a z-axis stage for focus. Also completed machine that performs Fast Array Op tical testing to cycle microscopic mirror arrays while performing dynamic electr ical testing. Two each of four different machines were built, one to remain onsi te and the second to ship to Production Fab in Taiwan. Duties included identifyi ng documentation issues or errors and making corrections as needed. Motion contr ol systems includes AC servo motors and microstepping dc steppers. Assembly was all-inclusive, from mounting hardware in bare chassis to building wire and cable harnesses. 1/2003 - 10/2004 Onsite Engineering San Jose,CA Electronics Engineering Technician Contract Engineering Technician; Rehired by Applied Materials; Santa Clara, CA a s Contractor to complete three Reliability Test Fixtures. Completed Electrical w iring, Mechanical assembly and Software development; identified S/W issues in s/ w created by prev. group. Created QBasic program for Motion Control and Analog / Dig. I/O Sensor Feedback via DeviceNet and save cycle-count & realtime sensor d ata to file. Custom configured several PC's for Test-Fixture H/W control. Adapte d in house surplus hardware to monitor & capture real-time data and control Test Fixture H/W. Completed assignment 'on time' (in 6 wks); All three fixtures were fully operational (including fixture running on my S/W). Contract was renewed s everal times and ended on 10/1/04 9/2000 - 11/2002 Applied Materials Santa Clara, CA Electronics Engineering Technician (300mm Systems Systems Engineering technician responsible for troubleshooting DeviceNet and Mot ion Control Issues, Maintaining Lab Test Tools, and assisting with new Prototype builds. * Learned DeviceNet device communications protocol and Motion Control H/W & S/W unassisted. * Created New Mobile-Response Diagnostic Station used to reduce costly Lab Tool downtime. * Identified 300mm wafer-lifter functionality issue. * Resolved wafer-lifter issue by submitting Software Request (SR) to add new S/W functionality. * Created custom Motion Control software for Reliability testing of 300mm tool w afer- lifts. * Authored ET Conference Technical Paper on 'Block Move' Optimization using Velo city Equation. * Eng support for SEMICON Show Tool by installing Local Center-Finder (LCF)FiberOptics sensors. * 300mm PVD Tool Owner; sole person responsible for maintenance of two multi-mil lion dollar tools. * Performed Vibration Analysis of Wafer-Lifts & Servo Motor-Drivers using PC-bas ed Data-Acq. Tools. Also provided Motion Control support for Engineers working on new wafer-lift design. * Provided Engineering support for numerous other design & testing projects whil e performing above. 12/1999 - 9/2000 Magellan Satellite Access Products Santa Clara, CA Production Technician (PCB Board Test Dept Test, troubleshoot and repair micro-processor based Global Positioning System pr oducts including Microwave Receiver circuits. * Identified and resolved Surface Mount Device process related issues to reduce PCB board scrap. * Adapted Final Test S/W for use in PCB Board Test Dept. to reduce production te sting costs. 1/1998 - 8/1998 Joslyn Electronic Systems Corporation Goleta, CA Electronics Engineering Technician Eng tests of AC Arrestors, Transient Voltage Suppression Systems, and other Surg e Protection devices; UL testing of new products, & test reports * Adapted 2kA Silicon Avalanche Diode (SAD) PCB for 10kA Silicon Avalanche Diode design 8/1997 - 12/1997 Electro-Optical Indust. Goleta, CA Field Service Technician (Heatherington Furnace Division) Assembly, panel wiring, factory testing, and field installation of high temperat ure Tungsten-Nichrome Element vacuum furnace. 10/1995 - 6/1997 Applied Magnetics Corp Goleta, CA Wafer Fabrication Maintenance Technician Maintenance & repair of 200mm Semiconductor wafer fabrication & test equipment. * Adapted VAX Mainframe S/W as WaferFab Equipment History Database to reduce downtime. * Identified and Resolved High-Power RF Matching Unit Tuning issues EDUCATION: 10/1995 DeVry Institute of Technology US-CA-Pomona Bachelor's Degree Bachelor of Science in Electronics Engineering Technology (BSEET) ADDITIONAL INFORMATION: Hold 1 U.S. Patent (No. 4088315) (Computerized Karate Training Machine) * Listed in 'Who's Who in Technology Today' (Vol. 2, pp. 307, 1980) Selected based on above Patent. SKILLS & EXPERIENCE SUMMARY ASSEMBLY & PROTOTYPING XYRATEX 1. Assembling multi-axis complex factory automation equipment prototypes. 2. Assembling complex protype robotic End Effectors REFLECTIVITY 1. Assembling complex test machines with little or no supervision. 2. Building wire and cable harnesses 3. Working with one other technician, built & tested following machines: A) a process chamber machine, B) a chip sealing machine, C) a three axis chip inspection machine utilizing an x/y stage to position devi ces underneath an inspection camera equipped with a z-axis stage for focus. D) a machine performing Fast Array Optical testing to cycle DLP arrays while do ing dynamic electrical testing. ON-SITE ENGINEERING 1. Completed electrical wiring, mechanical assembly and software development of three ReliabilityTest Fixtures. 2. Adapted in house surplus hardware to monitor and capture real-time data and control Test Fixture H/W ELECTRO-OPTICAL INDUSTRIAL 1 Performing assembly, panel wiring, and field installation of high temperature Tungsten- Nichrome Element vacuum furnace. TESTING XYRATEX 1. Testing multi-axis complex factory automation equipment prototypes 2 Particle testing of subsystems within a mini-cleanroom environment test chamb er 3. Performed numerous in-house robotic system tests 4. Testing complex test machines with little or no supervision APPLIED MATERIALS 1.Performed Vibration Analysis of Wafer-Lifts and Servo Motor-Drivers using PC- based Data-Acquisition tools. MAGELLAN SATELLITE ACCESS PRODUCTS 1. Testing of micro-processor based GPS products including microwave receiver c ircuits. 2. JOSLYN ELECTRONIC SYSTEMS CORPORATION 1. Performing engineering tests of AC Arrestors, Transient Voltage Suppression systems, and other Surge Protection devices; UL testing of new products, and test reports. 2. Adapted 2kA Silicon Avalanche Diode (SAD) PCB for 10kA Silicon Avalanche Dio de application. ELECTRO-OPTICAL INDUSTRIAL 1 Performing assembly, panel wiring of high temperature Tungsten-Nichrome Eleme nt vacuum furnace. TROUBLESHOOTING XYRATEX 1. Troubleshooting multi-axis complex factory automation equipment prototypes 2.Troubleshooting complex test machines with little or no supervision APPLIED MATERIALS 1. Identified 300mm wafer-lifter functionality issues. 2. Resolved wafer-lifter issue through submitting Software Request (SR) to add n ew S/W functionality MAGELLAN SATELLITE ACCESS PRODUCTS 1. Troubleshooting to component level and repair of micro-processor based GPS pr oducts including microwave receiver circuits. 2. Identified and resolved Surface Mount Device process related issues reducing PCB board scrap APPLIED MAGNETICS CORPORATION 1. Identified and resolved High-Power RF matching unit tuning issues . TRAINING XYRATEX 1. Performing on-site training at factory in Malaysia and customer facility in S ingapore DOCUMENTATION REFLECTIVITY 1. Identifying documentation issues or errors and making corrections as needed LEARNING NEW SKILLS APPLIED MATERIALS 1. Learned DeviceNet device communications protocol and Motion Control H/W & S/ W unassisted. IMPLEMENTING NEW PROCEDURES OR TECHNIQUES APPLIED MATERIALS 1. Created new Mobile-Response Diagnostic Station utilized to reduce costly Lab Tool downtime 2. Resolved wafer-lifter issue through submitting Software Request (SR) to add new S/W functionality MAGELLAN SATELLITE ACCESS PRODUCTS 1. Adapted Final Test S/W for use in PCB Board Test Department. reducing produc tion testing costs 2. Adapted Final Test S/W for use in PCB Board Test Department. reducing produc tion testing costs APPLIED MAGNETICS CORPORATION 1. Adapted VAX Mainframe S/W as WaferFab Equipment History Database reducing do wntime MAINTENANCE APPLIED MATERIALS 1. 300mm PVD Tool Owner. Solely responsible for maintenance of two multi-million dollar tools APPLIED MAGNETICS CORPORATION 1. Performed maintenance and repair of 200mm Semiconductor wafer fabrication an d test equipment. ENGINEERING SUPPORT APPLIED MATERIALS 1. Provided Motion Control support for engineers working on new wafer-lift desi gn 2 Provided engineering support for numerous other design and testing projects w hile performing aforementioned. 3. Provided comprehensive engineering support for SEMICON Show Tool by installi ng Local Center- Finder (LCF) FiberOptics sensors; SOFTWARE APPLIED MATERIALS 1. Created custom motion control software for reliability testing of 300mm tool wafer-lifts. 2. Authored ET Conference technical paper on 'Block Move' optimization using Ve locity Equation ON-SITE ENGINEERING 1. Created QBasic program for Motion Control / Analog / Dig. I/O Sensor Feedbac k via DeviceNet, and saved cyclecount and realtime sensor data to file 2. Custom configured several PC's for Test-Fixture H/W control.