You are on page 1of 4

The Definative Guide to Mitel 3300/MCD IP Netw

Mitel 3300 IP Networking Configuration


System IP Configuration Form
Host Name:
System IP Address:
Subnet Mask:
Gateway IP Address:
Layer 2 (L2) Switch IP Address:

E2T Card IP Address:

802.1Q Setting (for QoS go to LAN Policy form)


Voice VLAN ID [1-4094]:

Domain Name:
Primary DNS Server:
Secondary DNS Server:

LAN Policy (QoS) - Leave as Standard

Voice Media
Voice Signalling
Other

Layer 2 Switch - Leave as Standard


Voice VLAN ID:
Tag VLAN 1 on Trunk Ports:
IGMP Snooping:

Spanning Tree Bridge - Leave as Standard unless both LAN ports are c
Rapid Spanning Tree (RSTP):
Bridge Priority:
Force Version:
Hello Time (seconds):
Max Age (seconds):
Forward Delay (seconds):
Tx Hold Count (seconds):

IP Routing
Router Control
ICMP Router Discovery Server:
Gateway IP:
IP Network List
Network Address
10.0.0.0
172.16.0.0
192.168.0.0
NOTE: Add any further Data Subnets that may be need to be accessed by the M

Mitel Network Switch Port Tagging


Voice VLAN required on Switching
On HP ProCurve Switching add 'voice' command to Voice VLAN to turn on LLDP
LLDP devices such as Mitel handsets are VLAN aware
Non LLDP swithing may require manually setting VLAN ID on handset to boot.
QoS and VLAN tagging occours at Mitel device level thru DHCP options.

Application

Mitel 3300/MCD ICP


Mitel IP Handset (No cascaded PC)
Mitel IP Handset (Cascaded PC)
SIP Device
Mitel 5550 IP Console
Windows 2003/2008 Application Server
(CCM,IQ,YA,UC <2.0, etc)
Mitel Std Linux
Mitel Application Server (MAS,MBG, LBG and UCA)

Vmware Host
- Virtual Machine Virtual NIC (Windows)
- Virtual Machine Virtual NIC (MSL)
Wireless DECT Basestation
Trunking Port to 2nd Switch

Routing Requirements
Routing required between the Voice and Data Subnets.

Routing required between Voice Subnets across WAN


Routing required between Voice and Data across WAN
el 3300/MCD IP Networking

Same as Network Element name


IP in Voice Subnet
Subnet Mask of Voice Subnet
Gateway of Voice Subnet
Secondary
No IP if not IP in Voice Subnet (not CX)
installed
If Installed set Static IP
thru DHCP

Always 1 - Do not change.

Same as internal LAN


Manual host entries
required in corp DNS
Use Internal DNS
Set to external DNS if no secondary availabile (61.88.88.88)

DSCP [0-63] L2 Priority [0-7]


46 6
26 3
0 0

1
Disabled
Enabled

dard unless both LAN ports are connected.


Disabled
15 [61440]
RSTP
2
20
15
6

Enabled
Voice Subnet Default Gateway
Net Mask
255.0.0.0
255.240.0.0
255.255.0.0
may be need to be accessed by the Mitel 3300.

mmand to Voice VLAN to turn on LLDP.


VLAN aware
setting VLAN ID on handset to boot.
vice level thru DHCP options.

Recomended Subnet Data VLAN Voice VLAN

Voice Untagged Tagged


Voice Untagged Tagged
Voice Untagged Tagged
Voice
Voice Forbid Untagged
Voice/Data Untagged Tagged

Voice Untagged Tagged


Voice Untagged Tagged
Data (voice if carrying
Voice only apps) Untagged Tagged
Voice/Data Untagged Tagged
Voice Untagged Tagged
Voice Untagged Tagged
Untagged Tagged

Routing between Voice and Data subnets required when deploying the following
VM to email
Unified Communicator
NuPoint
LAN VLAN tagging to be carried across WAN (if possible). QoS maintained.
Required when Applications servers such as MAS and UCA are centralised

You might also like