Professional Documents
Culture Documents
1) Jodoi IT Company recently installed a new router in their office. Complete the
network installation by performing the initial router configuring RIPV2
routing using the router command line interface (CLI) on Router-B
Configure the router per the following requirement :
- All passwords have been temporarily set to “cisco”.
3.1) What destination Layer 2 address will be used in the frame header containing a
packet for host 172.130.0.3 ?
A. 704
B. 196
C. 702
D. 344
3.2) A static map to the B3 location is required. Which command should be used to
create the map ?
A. frame-relay map ip 172.130.0.4 704 broadcast
B. frame-relay map ip 172.130.0.4 196 broadcast
C. frame-relay map ip 172.130.0.4 702 broadcast
D. frame-relay map ip 172.130.0.4 344 broadcast
3.3) Which connection user the default encapsulation for serial interfaces on Cisco
routers?
A. The serial connection to the B5 branch office.
B. The serial connection to the B6 branch office.
C. The serial connection to the B7 branch office.
D. The serial connection to the Multination Core.
3.4) If required, what password should be configured on the router B5 branch office to
allow a connection to be established with the HQ router ?
A. No password is required.
B. Enable
C. Secret
D. Telnet
E. Console