You are on page 1of 4

Kamberoller®

Steering Guide
A Maxcess
International
Company

FEATURES
KEY
T he innovative KAMBEROLLER® Steering Guide delivers precise web position by
bending the web through a long entering span. This versatile guiding assembly provides
Key Features:
• Our largest guide, accommodating
immediate lateral correction for transient errors, while at the same time compensating for web widths up to 120”
the web’s steady state errors. (3,048 mm), and tensions to
1245 lbs (5,538 N).
KAMBEROLLER® steering guides are available with single or double rollers, and can
accommodate tensions up to 1245 lbs (5,538 N). Standard roll face lengths range from • Unique design provides web position
correction by bending web through
15” (381 mm) to 120” (3,048 mm), and roll diameters from 4” (102 mm) to 8” (203 mm).
long entering span.
Powered either with an electromechanical actuator or hydraulic cylinder,
• Electromechanical or hydraulic
KAMBEROLLER® Steering Guides are designed for dependable operation in the most
system operation.
demanding environments. The guides also feature two cast bases, hardened racerod
• Fast, accurate web positioning.
supports, and low-friction ball bushings.
• Low-friction ball bushings and
racerod supports.
• Durable construction for low mainte-
nance and long-lasting reliability.

SPECS
General Specifications
• Compatible with all standard Fife
sensors and controllers.
• Sensor selection is based on web
material and system requirements.
• Optional Servo-Center available to
Product Name: Roller Face:
speed setup and threading.
KAMBEROLLER® Steering Guide 15 to 120”
(381 to 3,048 mm) • Wide selection of mounting brackets,
Load Capacity:
stands, sensors, and controllers
Up to 1,245 lbf (5,538 N)
available to ensure quick and easy
installation.
• Custom designs are available upon
request.
KAMBEROLLER INSTALLATION DIMENSIONS

ACTUATOR/CYLINDER MAY BE MOUNTED


INBOARD OR OUTBOARD DEPENDENT ON
APPLICATION REQUIREMENTS.

K
L
J
RACEWAY BASE ANGLE "L"
WILL BE FROM 5˚ TO 25˚
BASED ON APPLICATION.
BOTH RACEWAYS MUST BE
SHAFT LENGTH AT THE SAME ANGLE.
ROLL FACE + 0.5 IN [[12.7 MM]

D G

F
H

C ROLL FACE - A

ROLL FACE + B
Z MOUNTING BOLT DIAMETER
ONE HOLE EACH RACEWAY BASE

Kamberoller Dimension Chart

CORR. NOMINAL ROLL A B C D E F G J K Z


MODEL ± DIAMETER in. in. in. in. in. in. in. in. in. in.
in. (mm) in. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
KLB 1.5 3.0 & 4.0 1.25 7.4 9.3 0.88 3.0 4.13 4.38 6.9 6.7 1/2
(38) (76 & 102) (32) (188) (236) (22) (76) (105) (111) (175) (170) (13)
KA-4 1.5 4.0 & 6.0 3.75 10.0 10.3 2.13 3.5 4.68 3.63 7.8 9.3 1/2
(38) (102 & 152) (95) (254) (262) (54) (89) (119) (92) (198) (236) (13)
KA 2.5 4.0 & 6.0 3.75 11.6 12.7 2.13 3.5 4.68 3.63 9.5 10.5 1/2
(64) (102 & 152) (95) (295) (323) (54) (89) (119) (92) (241) (267) (13)
KA-9 4.5 4.0 & 6.0 3.75 14.9 17.7 2.13 3.5 4.68 3.63 13.0 12.8 1/2
(114) (102 & 152) (95) (378) (450) (54) (89) (119) (92) (330) (325) (13)
KCA 2.5 4.0 & 6.0 3.75 12.6 12.8 2.13 3.5 6.50 6.00 9.6 11.9 5/8
(64) (102 & 152) (95) (320) (325) (54) (89) (165) (152) (244) (302) (16)
4.5 4.0 & 6.0 3.75 15.9 17.7 2.13 3.5 6.50 6.00 13.0 14.2 5/8
KCA-9 (114) (102 & 152) (95) (450) (54) (89) (165) (152) (330) (361) (16)
(404)
1.5 6.0 3.75 12.1 10.9 2.13 4.6 6.50 6.00 8.3 11.6 3/4
KHA-4 (38) (152) (95) (277) (54) (117) (165) (152) (211) (295) (19)
(307)
2.5 6.0 3.75 13.7 13.4 2.13 4.6 6.50 6.00 10.0 12.8 3/4
KHA (64) (152) (95) (348) (340) (54) (117) (165) (152) (254) (325) (19)
4.5 6.0 3.75 17.1 18.3 2.13 4.6 6.50 6.00 13.5 15.1 3/4
KHA-9 (114) (152) (95) (434) (465) (54) (117) (165) (152) (343) (384) (19)
6.0 6.0 3.75 19.3 21.9 2.13 4.6 6.50 6.00 16.0 16.7 3/4
KHA-12 (152) (152) (95) (490) (556) (54) (117) (165) (152) (406) (424) (19)
3.0 8.0 3.75 17.1 15.9 2.13 4.6 6.50 6.00 11.7 15.1 3/4
KHA-9-T2 (76) (203) (95) (434) (404) (54) (117) (165) (152) (297) (384) (19)
4.5 8.0 3.75 19.3 19.4 2.13 4.6 6.50 6.00 14.2 16.7 3/4
KHA-12-T2 (114) (203) (95) (490) (493) (54) (117) (165) (152) (361) (424) (19)
WRAP STYLE LOADING CONFIGURATION

2B

4A

16
3A

1A

7 8

Kamberoller Guide Selection and Sizing Chart (for above illustrated wrap styles

NOM INAL NOM INAL WRAP STYLE NOMINAL MAXIMUM TE NSION lbs (N)
MODE L ROLLE R ROLLER
DIAM ETE R LE NGTH 1A 2B 3A 4A 6 7 or 8 16
in. (mm) in. (mm)
2.25 (57) 30.0 (762)
155 100 180 85 95 230 60
KLB to to
(690) (445) (801) (378) (423) (1023) (267)
6.0 (152) 48.0 (1219)

4.0 (102) 30.0 (762)


240 170 355 155 295 580 145
KA to to
(1068) (756) (1579) (690) (1312) (2580) (645)
8.0 (203) 48.0 (1219)

4.0 (102) 30.0 (762)


280 225 345 210 260 480 160
KCA-9 to to
(1246) (1000) (1535) (934) (1157) (2135) (172)
8.0 (203) 60.0 (1524)

4.0 (102) 30.0 (762)


700 555 950 535 695 1330 415
KHA-12 to to
(3114) (2469) (4226) (2380) (3092) (5916) (1846)
8.0 (203) 60.0 (1524)

4.0 (102) 30.0 (762)


1290 1020 1740 975 1280 2440 760
KHA-9-T2 to to
(5694) (4537) (7740) (4337) (5694) (10854) (3381)
8.0 (203) 120.0 (3048)

NOTES:
1. Selections for illustrated single-roller Kamberoller guides are based on Offset Raceway Clearance Pivot Brackets
(roller supports).
2. Selections for illustrated two-roller Kamberoller guides are based on Offset Pivot Brackets.
3. Roller size (diameter, wall thickness, length, and material), web wrap style, and tension will affect guide selection.
4. All information displayed in the chart above is approximate and is based on ball bushings.
Stainless steel racerods and Teflon bushings are available for special applications.
5. Fife will verify Kamberoller guide type and size for each application.
6. Additional wrap styles available are illustrated on the last page of this product sheet.
7. All dimensions in parenthesis are millimeters
Product Sheet: 7C-200 1.05

STEERING GUIDE WRAP STYLES

STYLE 1A STYLE 2A STYLE 3A STYLE 4A

STYLE 2B STYLE 3B STYLE 4B


STYLE 1B

STYLE 5 IS NOT
PRESENTLY IN USE

STYLE 8
STYLE 7
STYLE 6

STYLE 10 STYLE 11 STYLE 12


STYLE 9

STYLE 13 STYLE 14 STYLE 15 STYLE 16

Complementary Products:
FIFE
Guiding Products & Systems
- CDP-01 Web Guide Controller
- SE-22 Infrared Sensor
Inspection Products & Systems
TIDLAND
Slitting Products & Systems
Winding Products
MAGPOWR
Tension Control Products
Torque Control Products

Fife Corporation Maxcess Europe Maxcess Asia


222 West Memorial Road Fifestrasse 1, D-65779 300 Orchard Road, No. 15-05
Oklahoma City, OK 73114, USA Kelkheim/Ts., Germany Orchard Towers
Phone: 405-755-1600 Phone: (49) 6195-7002-433 Singapore 238875
Fax: 405-755-8425 Fax: (49) 6195-7002-933 Phone: (65) 6834-1998
A Maxcess E-mail: fife@fife.com E-mail: info@maxcess.de Fax: (65) 6835-4818
International Web: www.fife.com E-mail: jwongmax@singnet.com.sg
Company
©2005 Maxcess International

You might also like