Professional Documents
Culture Documents
A:
2 4 16 8
Q: When defining a NIC team (bond) in ESX Server, it is possible to designate some of the
physical NICs that make up the bond as "standby" NICs. Which statement most accurately
describes the purpose of a standby NIC? A standby NIC: A: is used to implement traffic
shaping for the rest of the team. is used only in the case of the failure of other NICs in the
team. is not used as part of the team until activated by the administrator. is used only
when network traffic exceeds the capacity of the rest of the team.
Q: Which of the following are virtual adapters that are only available in VMware
vSphere (Choose Two)?
A: MRU (Most recently used) Round Robin Fixed Least I/O Least
Busy
Q: CPU Ready Time measures the amount of time that: A: an ESX server’s
CPUs were idle (ready for work). a VM was given CPU resources. a VM was
ready to run, but had to wait for CPU. A guest OS was unable to use the CPU
reservation
of RAM in the virtual machine. Increasing the number of virtual CPUs in the
virtual machine. Increasing the memory shares for the virtual machine.
Q: An administrator wants to install vSphere ESX 4 on two blade servers. Each blade has two
dual core CPUs. How many vSphere licenses are required for this solution? A: 2 4
8 12
Q: What two things are controlled by the DRS automation level (Choose Two)?
the most likely cause for the performance problems? A: The VM is CPU
constrained. The ESX Server host is CPU constrained. The ESX Server NIC is
being over utilized. The ESX Server host needs more memory installed
Q: To restart the VMware Host Agent on an ESX Host, which command would you
Q: Which of the following is true regarding backups created with VMware Data
Recovery? A: Backups of ESX 3.x VMs are not supported Backups of ESX 3.0
VMs are not supported, but ESX 3.5 VMs are supported Backups of ESX 3.x VMs
take longer than backups of ESX 4 VMs Backups of ESX 3.x and later VMs take
the same amount of time to complete
Q: Which of the following indicates how suitable an analyzed system is for Guided
A: Mask the NX/XD bit in the Processor section of the Configuration tab on the ESX Hosts
Mask the NX/XD bit on every virtual machine in the cluster Enable Enhanced VMotion
vCenter Server? A: When the managed vSphere environment exceeds 200 ESX
hosts When the managed vSphere environment exceeds 1000 virtual machines
When deploying vSphere 4.1 or later vCenter Server is not supported on 64-
bit Windows operating systems
Q: Which feature allows a running virtual machine to be moved from one server to
prepare for the maintenance event? A: Change the policy on the ESX Host to
MRU for the duration of the maintenance event Use the vSphere Client to
disable the path impacted by the maintenance event Unplug the FC cable from
vmhba2 for the duration of the maintenance event Unplug the FC cable from the
Storage Processor port on the FC array for the duration of the maintenance event
: A VMotion validation check will fail if the virtual machine has (Choose Two):
A: An active connection that matches an existing port group label on the target
Q: An administrator finds that the Hardware Status tab is unavailable when an ESX
Host is selected in vCenter Server. Which of the following steps could be taken to
investigate the issue (Choose Two)?
A: Check the status of the CIM Data Feed in vCenter Service Status Check
the status of the vCenter Hardware Service in the Windows Services applet
Check the status of the vCenter Hardware Service in the Plug-in Manager Check
the status of the CIM Data Feed on the ESX Host
Q: Resource Pools at the same level are called? A: Sibling Pools Root
Q: What is the maximum number of backup or restore jobs that VMware Data
Question: Which of the following are virtual adapters that are only available
in VMware vSphere (Choose Two)?
Incorrect response(s):
Flexible network adapter
Explanation: The Flexible network adapter was introduced in ESX 3, allowing for
vlance compatibility during guest OS installation, and changing to vmxnet once
VMware Tools was installed. The Advanced network adapter is the third generation
version of this adapter and was introduced with vSphere.
LSI Logic SCSI adapter
Explanation: LSI Logic and BusLogic SCSI adapters have been available in ESX for
quite some time. The Paravirtualized SCSI (PVSCSI) adapter was created by VMware
and introduced with vSphere.
Note: This response is either incorrect, or additional responses may be required to
receive a 100% score for this question.
Question: Which of the following has no effect on the amount of physical
memory resources used for virtualization overhead (Choose Two)?
Incorrect response(s):
Increasing the amount of RAM in the virtual machine.
Explanation: Larger amounts of virtual machine memory will increase the amount of
overhead to the virtual machine. Adjusting memory share values affects priority
access to resources when contention exists, but does not increase or decrease a
virtual machine's overhead. Operating System architecture affected memory
overhead in earlier generations of ESX, but does not impact overhead in vSphere
4.x
Increasing the number of virtual CPUs in the virtual machine.
Explanation: Increasing the number of virtual CPUs in the virtual machine will
increase the overhead for the virtual machine. Adjusting memory share values
affects priority access to resources when contention exists, but does not increase or
decrease a virtual machine's overhead. Operating System architecture affected
memory overhead in earlier generations of ESX, but does not impact overhead in
vSphere 4.x
Note: This response is either incorrect, or additional responses may be required to
receive a 100% score for this question.
Question: You have a Windows 2003 Server virtual machine (VM) that is
experiencing performance problems. Task Manager displays the following
information: 1) CPU Usage: 85% 2) Memory Available: 3 GB 3) Network
Utilization: 25%. vCenter displays this additional information: 1) ESX
Server CPU Utilization: 60% 2) VMkernel Swap Activity: None 3) Average
Network Usage: 900 Mbps Which of the following is the most likely cause
for the performance problems?
Incorrect response(s):
The VM is CPU constrained.
Explanation: Although CPU utilization within the virtual machine is high, the ESX
Server shows available CPU resources, so the VM is not CPU constrained. vCenter
also shows a very high network utilization, which is the more likely cause in this
scenario.
Question: A VMotion validation check will fail if the virtual machine has
(Choose Two):
Incorrect response(s):
Insufficient network bandwidth on the target virtual switch
Explanation: VMotion requires sufficient network bandwidth to perform migration,
but this is not a part of the VMotion validation check.
An active connection to an internal virtual switch
Note: This response is either incorrect, or additional responses may be required to
receive a 100% score for this question.
Question: What two things are controlled by the DRS automation level
(Choose Two)?
Incorrect response(s):
VM restart priority
Explanation: VM restart priority is a VMware HA setting that determines the order in
which virtual machines will be restarted if an ESX Host fails. DRS automation
controls where a virtual machine is placed within the cluster and balances virtual
machine workloads using VMotion migration.
Initial placement of VMs
Note: This response is either incorrect, or additional responses may be required to
receive a 100% score for this question.
Question: CPU Ready Time measures the amount of time that:
Incorrect response(s):
A guest OS was unable to use the CPU reservation
Explanation: CPU Ready Time measures the amount of time a VM was ready to do
work but was unable to get CPU resources.
Question: What is the maximum number of paths allowed in ESX 4.x for an
iSCSI LUN?
Incorrect response(s):
4
Question: To restart the VMware Host Agent on an ESX Host, which
command would you use?
Incorrect response(s):
service mgmt-hostd restart