Professional Documents
Culture Documents
–3–
28 Angle bracket 34 T-head bolt
WK 200/200, WK 207/165 FHS CLIX-N
31 Rail hanger
SB
Sliding elements/height adjustment
–4–
43 Threaded rod
Accessories G
–5–
52 Cantilever arm
Duct fixings FCA
48 Rubber inlay
EMS
Channel fittings
53 Flat fitting
FFF
54 Beam clamp
Profile fixings FBC
49 Hole stamp
LST 10
56 Pipe clamp
FRS A2, FRS A4
57 Channel
Heavy-duty application range MS A2
–6–
58 Saddle flange
SF A2
General fixings
59 T-head bolt
FHS CLIX A2
60 T-head bolt
HS 38 A2
High performance steel anchors
–7–
73 Hammerset anchor
EA
Technical appendix
–8–
Notes
–9–
fischer innovative products
5 7
2
5
3 4
6
1 The fischer hinged pipe clamp 1 The optimised profile cross-sec- 1 Just insert the fischer FHS T-head
Plus allows for single-handed in- tions lead to high flexural strength bolt CLIX-N into the channel or
stallations and tear strength of the fischer bracket and turn. Pre-assembly is
channels. finished as easy as this.
2 The rapid locking mechanism
(patent pending) with a readjusting 2 Due to different hole geometries of 2 Locking mechanism (patent pend-
mechanism allows for the simple 27/18 mm and 28/30 mm, the chan- ing) for fixing the T-head bolt in its
and quick installation of pipes. nels can be fixed to the walls, the pre-assembled state.
floor or the ceiling in a variety of
3 Pre-installation of the pipe through 3 The fischer T-head bolt can be ad-
ways.
the snapping mechanism allows justed and moved along the chan-
subsequent simple adjustment. 3 The channels are specially adjusted nel as desired, without falling out.
to fit all connecting parts of the This makes installation easier and
4 The rapid locking mechanism
fischer Installation System, thus saves time. After adjustment, the
(patent pending) prevents uncon-
allowing a variety of different con- T-head bolt should be locked with
trolled opening of the pipe clamp
structions and connections without the nut.
after snapping into position. This
the need for drilling or welding.
saves time and effort, particularly 4 Thanks to the grooved pin a height
during overhead installations. 4 For fixing the channels fischer, as adjustment can be carried out
the leading fixings specialist, offer quickly and easily, as required by
5 The compact design of the pipe
a complex range of steel and nylon the situation on site. For this pur-
clamp, without large projections
fixings as well as chemical fixings, pose the grooved pin can be cut
around the hinged and the lock
for variety of substrates. One ex- off with a bolt cutter at the required
area, allows for neat and simple
ample is the fischer FNA 6 x 40 S, groove, either before installation or
insulation of pipe, even with thin
item no. 50947. Channel anchor after. The thread of the grooved pin
insulation.
which was especially developed remains undamaged.
6 The screw-driver adjusted combi- for lightweight channels MS 27/18
5 The bolt fits into all common chan-
nation Phillips screws have a large and 28/30.
nels with C-profiles of the dimen-
head and are secured, so they will
sions 26/18 mm, 27/18 mm, 26/26
not get lost.
mm, 27/30 mm, 28/30 mm, 30/15
7 The pipe clamps have been tested mm or 30/30 mm. For this purpose
for sound insulation in accordance the T-head bolt must be inserted
with DIN 4109. The test certificate at an angle.
can be made available on request.
– 10 –
fischer pipe clamps FGRS Plus, FKS Plus and FRS Plus
– 11 –
Pipe clamps
A
Technical details
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
D
Temperature range: –50 °C to +110 °C
s
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B
b
A
Technical details
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
D
– 12 –
Pipe clamps
Technical details
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B
A
Technical details
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B
– 13 –
Pipe clamps
A
Technical details
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C
s
D
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B
b
A
Technical details
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B
– 14 –
Pipe clamps
Technical details
D
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C s
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 780078: Type B b
– 15 –
Pipe clamps
Technical details
D
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109 s
Temperature range: –50 °C to +110 °C
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2 b
Long-term behaviour: DIN 78078: Type B
Technical details
Sound insulation material: Material: SBR/EPDM
D
– 16 –
Pipe clamps
D
s
– 17 –
Pipe clamps
Technical details
Density: 250 kg/m3
D
Compressive strength: 0.6 N/mm2
Heat conductivity: 0.045 W/mK by 10 °C
Temperature range: –160 °C to +130 °C
Fire behaviour: according to DIN 4102: Class B2 V
Type Item No. Qty. Outer D Nominal Insulation Effective out- Pipe clamp A V
per box carton qty. External pipe size thickness side clamp width Thread Locking
pcs. pcs. mm mm mm mm mm screw
– 18 –
Pipe clamps
Sealing-paste DPK
S
Technical details
Density: 80 kg/m3 D
Compressive strength: 0.6 N/mm2
Heat conductivity: 0.026 W/mK by 10 °C
Temperature range: –100 °C to +80 °C
Fire behaviour: according to DIN 4102: Class B2
– 19 –
Pipe clamps
S
Technical details
Density: 80 kg/m3 D
Compressive strength: 0.6 N/mm2
Heat conductivity: 0.039 W/mK by 10 °C
Temperature range: –40 °C to +80 °C
Fire behaviour: according to DIN 4102: Class B2
– 20 –
Pipe clamps
Technical details
D
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C s
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B b
– 21 –
Pipe clamps
U-bolt ETR
L1
L2
Type Clamping Item No. Qty. Outer Spanner Wire Nominal B Thickness
range per bag carton qty. size size Width L1 L2
mm pcs. pcs. mm inch mm mm mm
ETR 8– 13 24415 10 100 8 M6 1/4 20 32 20
ETR 12– 17 24416 10 100 8 M6 3/8 25 38 20
ETR 15– 21 24417 10 100 8 M6 1/2 30 45 30
ETR 20– 27 24418 10 50 8 M8 3/4 35 60 30
ETR 26– 34 24419 10 50 8 M8 1 42 67 30
ETR 33– 42 24420 10 50 8 M8 1 1/4 56 76 35
ETR 40– 49 24421 10 50 8 M8 1 1/2 57 82 35
ETR 50– 60 24422 10 50 8 M8 2 71 90 35
ETR 60– 70 24423 10 50 13 M10 2 1/4 83 105 40
ETR 66– 76 24424 10 50 13 M10 2 1/2 90 117 45
ETR 70– 82 24425 10 50 13 M10 2 3/4 93 120 45
ETR 80– 90 24426 10 50 13 M10 3 100 123 45
ETR 90–102 24427 5 50 17 M12 3 1/2 118 155 50
ETR 116–108 24428 5 50 17 M12 121 160 55
ETR 102–114 24429 5 50 17 M12 4 135 160 55
ETR 121–127 24430 5 50 17 M12 142 170 55
ETR 126–133 24431 5 50 17 M12 145 180 65
ETR 131–140 24432 5 25 17 M14 5 157 190 70
ETR 143–153 24433 5 25 17 M14 170 200 70
ETR 150–159 24434 5 25 17 M14 5 1/2 175 208 70
ETR 168 24435 5 25 17 M14 6 185 210 70
ETR 193.7 24436 5 25 17 M14 210 240 60
ETR 219 24437 5 25 17 M14 8 233 275 60
– 22 –
Pipe clamps
Pipe clip FC
Technical details
Material: Polyamide
Temperature range: –40 °C up to +80 °C
Technical details
Material: Polyamide
Temperature range: –40 °C up to +80 °C
– 23 –
Pipe clamps
– 24 –
Pipe clamps
– 25 –
Pipe clamps
Material: SW 7
W1 drive: Cq 15 DIN 1654 or equal
D
shell: galvanised
band: galvanised
W2 drive: Cq 15 DIN 1654 or equal
shell: chrome plated steel 1.4016 according to DIN 1744 B =
or equal non corrosive steel 9 mm
band: chrome plated steel 1.4016 according to DIN 1744 S = 0,6 mm
or equal non corrosive steel
– 26 –
Channels/brackets/accessories
Channel MS
Profile 40/120 mm
Profile 40/60 mm
6000 mm
6000 mm
60 mm 120 mm
3 mm
3 mm
17 mm 17 mm
40 mm 40 mm
Type Item No. Qty. Outer Length Profile Profile Width Height
per box carton qty. thickness
pcs. pcs. mm mm mm mm
MS 27/18 79560 1 20 2000 27/18 1.25 27 18
MS 27/18 79557 1 10 3000 27/18 1.25 27 18
MS 27/18 30072 1 20 6000 27/10 1.25 27 18
MS 28/30 79561 1 8 2000 28/30 1.75 28 30
MS 28/30 79558 1 8 3000 28/30 1.75 28 30
MS 38/40 79562 1 5 2000 38/40 2.00 38 40
MS 38/40 79559 1 4 3000 38/40 2.00 38 40
MS 38/40 30075 1 20 6000 38/40 2.00 38 40
MS 40/60 14314 1 20 6000 40/60 3.00 40 60
MS 40/120 14315 1 10 6000 40/120 3.00 40 120
End cap AK
for profile for profile for profile for profile
27/18 28/30 38/40 40/60
– 27 –
Channels/brackets/accessories
H
S
4
90
4
100
125
165
200
13x22 13x18
40 13x22 ∅ 10,5
13 x 18
40 40
Type: WK 100/100 Type: WK 200/200 Type: WK 207/165
– 28 –
Channels/brackets/accessories
H B H B
LA LA
L L
S S
Universal bracket UW S
90
mm
20
mm
135 mm
11 mm
94 mm
m
42m
4m
m
Saddle flange SF
Type: SF Q Type: SF L
– 29 –
Channels/brackets/accessories
80
Type: STF Q Type: STF L
11 x 20
Type Item No. Qty. Distance Holes Base plate Version Suitable
per box between holes size for profile
pcs. mm mm mm
STF Q 27 79590 20 83 11 x 20 120 x 40 x 4 horizontal 27/18 + 28/30
STF L 27 79592 20 83 11 x 20 120 x 40 x 4 vertical 27/18 + 28/30
STF Q 38 79591 20 83 11 x 20 120 x 40 x 4 horizontal 38/40 + 40/60
STF L 38 79593 15 83 11 x 20 120 x 40 x 4 vertical 38/40 + 40/60
6 mm
25
17 40 15 40
25 15 6 mm
17
75 85 75
75 33 40 40
33
°
45 45 °
90 °
90° 105
105 85 mm
80
100 50 mm
40
33 10,5 mm
15 10,5 mm
33
17
17
8,5 x 25 8,5 x 25
l 10,5 l 10,5 40
6
6
4
15
4 40 mm 40 mm
40 mm 40 mm
– 30 –
Channels/brackets/accessories
Rail hanger SB
Channel connector SV
Type: SV 27, 38 Type: SV 40 M 10
33,5 mm
500 mm 53,5 mm
5 mm
– 31 –
Channels/brackets/accessories
Channel nut HG
Type Item No. Qty. per box Thread S Suitable for profile
pcs. mm
HG 27 M6 49480 200 M6 4 27/18 + 28/30
HG 27 M8 79595 100 M8 4 27/18 + 28/30
HG 27 M10 79596 100 M10 4 27/18 + 28/30
HG 38 M6 77667 100 M6 6 38/40 + 40/60 + 40/120
HG 38 M8 24687 100 M8 6 38/40 + 40/60 + 40/120
HG 38 M10 24688 100 M10 6 38/40 + 40/60 + 40/120
– 32 –
Channels/brackets/accessories
Sliding nut SM 38
D
for profile
27/18 and 28/30
for profile
38/40, 40/60,
40/120
Type Item No. Qty. per box Thread S Suitable for profile
pcs. mm
SM 38 M8 79600 50 M8 6 27/18 + 38/40 + 40/60 + 40/120
SM 38 M10 79601 50 M10 6 28/30 + 38/40 + 40/60 + 40/120
C
B
A
E
C
B
A
E
– 33 –
Channels/brackets/accessories
L1
L2
Type Item No. Qty. per box Thread L1 L2 Suitable for profile
Length Projection
pcs. mm mm
FHS CLIX-N M8 x 90 79605 50 M8 90 85 27/18 + 28/30
FHS CLIX-N M8 x 140 79606 50 M8 140 135 27/18 + 28/30
FHS CLIX-N M8 x 190 79607 50 M8 190 185 27/18 + 28/30
Type Item No. Qty. per box D Thread L1 Length L2 Projection Suitable for profile
pcs. mm mm
T-head bolt FHS CLIX
FHS CLIX 8 x 20 79620 100 M8 20 15 27/18 + 28/30
FHS CLIX 8 x 30 79621 100 M8 30 25 27/18 + 28/30
FHS CLIX 8 x 40 79622 100 M8 40 35 27/18 + 28/30
FHS CLIX 8 x 50 79623 100 M8 50 45 27/18 + 28/30
FHS CLIX 8 x 60 79624 100 M8 60 55 27/18 + 28/30
FHS CLIX 8 x 70 79625 50 M8 70 65 27/18 + 28/30
FHS CLIX 8 x 80 79626 50 M8 80 75 27/18 + 28/30
FHS CLIX 8 x 90 79627 50 M8 90 85 27/18 + 28/30
to be continued
– 34 –
Channels/brackets/accessories
T-head bolt HS 38
for profile for profile
38/40 27/18 + 28/30
L1
L2
Type Item No. Qty. per box D Thread L1 L2 Suitable for profile
Length Projection
pcs. mm mm
HS 38 M8 x 30 79610 50 M8 30 24 27/18 + 28/30 + 30/40 + 40/60 + 40/120
HS 38 M8 x 40 79611 50 M8 40 24 27/18 + 28/30 + 30/40 + 40/60 + 40/120
HS 38 M8 x 60 79612 50 M8 60 54 27/18 + 28/30 + 30/40 + 40/60 + 40/120
HS 38 M10 x 25 63956 50 M10 25 19 27/18 + 28/30 + 30/40 + 40/60 + 40/120
HS 38 M10 x 30 79615 50 M10 30 24 27/18 + 28/30 + 30/40 + 40/60 + 40/120
HS 38 M10 x 40 79616 50 M10 40 34 27/18 + 28/30 + 30/40 + 40/60 + 40/120
HS 38 M10 x 60 79617 50 M10 60 54 27/18 + 28/30 + 30/40 + 40/60 + 40/120
* See diagrams in the technical appendix.
Channel washer HK
D
Type Item No. Qty. per box Hole Suitable for profile
pcs. mm
HK 27 79650 50 10.5 27/18 + 28/30
HK 38 79651 50 10.5 38/40
HK 40/60 20946 100 13 38/40 + 40/60
* See diagrams in the technical appendix.
– 35 –
Sliding elements/height adjustment
250 mm
250 mm
160 mm
160 mm
13 mm
13 mm
3/4"
max. 36 mm
max. 36 mm
Type Item No. Qty. Thread Max. Max. length Max. recom. Max. working loads
per box move- of projection of pipe- surface
ment threaded rods mounted suspended
pcs. mm N N
GLL 3/4 64038 5 3/4 165 160 to DN 200 4000 3500
GL 3/4 64041 5 3/4 165 160 to DN 200 4000 3500
Sliding hanger SB
– 36 –
Sliding elements/height adjustment
22
15
38
150
Type Item No. Qty. per box Working loads Suitable for profile
pcs. N
GLK 27 79683 50 500 27/18 + 28/30
GLK 38 79684 20 1000 38/40
Type Item No. Qty. per box Working loads D Thread inside/outside Length
pcs. N mm
PDH M8 79676 50 2500 M8 74
PDH M10 79677 50 3000 M10 78
PDH M12 64037 25 3500 M12 89
PDH K M8 – short 68267 50 2500 M8 48
PSDH K M10 – short 68269 50 3000 M10 52
Parallel connector PV
The fischer parallel connector: for quick height adjustment of threaded rods
or pins. Hold threads side by side, push parallel connector over the top –
ready. The parallel engagement of the threads guarantees the support of the
connection. The height can be adjusted by turning the set screw.
Type Item No. Qty. per box Working loads For thread
pcs. N
PV M6 20947 100 600 M6
PV M8 79678 100 2000 M8
12,5
22,5
– 37 –
Notes
– 38 –
Accessories
11 x 7 mm
70 mm
Type Item No. Qty. per box Working loads Hole- D Clamping range L
pcs. N mm mm
TKL L M8 64055 50 1200 M8 0–18
TKL M8 79687 50 2500 M8 0–23
TKL L9 77605 50 1200 9 0–18
TKL M10 79688 50 2500 M10 0–20
TKL 11 79689 50 2500 11 0–20
TKL M12 20949 50 3500 M12 0–26
With VdS approval.
With VdS and FM approval.
TKL L = light, TKL = standard
– 39 –
Accessories
Type Item No. Qty. per box Total length D Hole diameter B Width
pcs. m mm mm
Perforated steel banding LBV, galvanized
LBV 12 79549 10 10 5.0 12
LBV 17 79550 10 10 6.5 17
LBV 26 79551 8 10 8.5 26
Perforated steel banding LBK, plastic coated
LBK 12 79553 10 10 4.5 14
LBK 19 79554 8 10 6.5 19
LBK 27 79555 5 10 8.5 27
Textile web strapping GWB
GWB 20959 10 10 – 15
10
0
m
m
60Ð105 mm
Type Item No. Qty. per box LL Hole W Thread distance D Thread
pcs. mm mm
DPP 65 79702 50 8.5 x 18 65 M8
DPP 85 79703 50 8.5 x 18 85 M8
DPP 105 79704 50 8.5 x 18 105 M8
DPF 60–105 24648 50 60–105 M8
– 40 –
Accessories
Multi connector MW
L1 L
– 41 –
Accessories
L1
SW L
Steel grade 5.6 TX 25
L
8
79810
– 42 –
Accessories
Type: G Type: GS
Steel grade 4.6
– 43 –
Accessories
Hexagonal connector VM
Reduction piece RD
B
mm
40
Type: RDM A l
=
Type: GRD A
Steel grade 5.6 Steel grade 5.6
Eyebolt AG
– 44 –
Accessories
– 45 –
Accessories
Type Item No. Qty. per box SW Spanner size D Thread L Length
pcs. mm mm
SKS 6 x 20 79711 100 10 M6 20
SKS 8 x 16 79415 100 13 M8 16
SKS 8 x 30 79713 100 13 M8 30
SKS 8 x 45 79714 100 13 M8 45
SKS 8 x 55 79715 100 13 M8 55
SKS 8 x 100 79827 100 13 M8 100
SKS 10 x 20 79416 100 17 M10 20
SKS 10 x 30 79417 100 17 M10 30
SKS 10 x 55 79721 100 17 M10 55
SKS 12 x 20 77610 100 19 M12 20
SKS 12 x 55 77611 100 19 M12 55
SKS 12 x 80 77612 100 19 M12 80
Washer U I
S
A
Hexagonal nut MU
– 46 –
Duct fixings
Technical details
D
Sound insulation material: Material: SBR/EPDM
Sound insulation: for DIN 4109
Temperature range: –50 °C to +110 °C s
Hardness: 45 ± 5° Shore
Fire behaviour: according to DIN 4102: Class B2
Long-term behaviour: DIN 78078: Type B b
– 47 –
Duct fixings
35 35 35 35
LRBN LRB
5 5
35 30
– 48 –
Profile fixings
4,2 mm
Type Item No. Qty. per box Length Max. perm. Thread SW
pcs. mm load N
TZ M8 64094 25 1300 M8
TZH M8 79825 25 1300 M8
TZ M10 64095 25 1300 M10
TZH M10 79826 25 1300 M10
Suitable hexagonal screw SKS
SKS 8 x 100 79827 100 100 M8 13
MU M8 79734 100 M8 13
U 8 x 28 78725 100
with VdS approval fixed nut, without VdS approval.
– 49 –
Notes
– 50 –
fischer Strut
– 51 –
Heavy-duty application range NEW
Channel FUS
FUS 21 FUS 41
Type Item No. Qty. per box Length Profile Width Thickness Height
pcs. m mm mm mm
FUS 41 / 3m 77346 1 3 41/41 plain 41 2.5 41
FUS 41 / S3m 77347 1 3 41/41 slotted 41 2.5 41
FUS 21 / 3m 77348 1 3 41/21 plain 41 2.5 21
FUS 21 / S3m 77349 1 3 41/21 slotted 41 2.5 21
FUS 41 / 6m 77534 1 6 41/41 plain 41 2.5 41
FUS 41 / S6m 77537 1 6 41/41 slotted 41 2.5 41
FUS 21 / 6m 77539 1 6 41/21 plain 41 2.5 21
FUS 21 / S6m 77541 1 6 41/21 slotted 41 2.5 21
Available pre-galvanized. Other profiles on request. Available from September 2003.
Type Item No. Qty. per box Size base plate L Length Profile
pcs. mm mm
FCA 300 77359 1 127 x 45 x 8 300 41/41 Plain
FCA 450 77361 1 127 x 45 x 8 450 41/41 Plain
FCA 600 77363 1 127 x 45 x 8 600 41/41 Plain
FCA 750 77365 1 127 x 45 x 8 750 41/41 Plain
Hole diameter in base = 14 mm for all cantilever arms. Available from September 2003.
Note: all fittings are hot dipped galvanized.
– 52 –
Channel fittings
U-fitting FUF
FFF 4 FFF 4 T
– 53 –
Channel fittings
FBP 2 FBP 4
– 54 –
Stainless steel programme
– 55 –
Stainless steel programme
D
s
– 56 –
Stainless steel programme
Channel MS A2
End cap AK
for profile for profile
27/18 38/40
– 57 –
Stainless steel programme
Saddle flange SF A2
– 58 –
Stainless steel programme
Channel nut HG A2
Type Item No. Qty. per box Thread Suitable for profile
pcs.
HG 27 M8 A2 77636 100 M8 27/18 + 28/30
HG 27 M10 A2 64977 100 M10 27/18 + 28/30
Sliding nut SM 38 A2
D
for profile
27/18 u. 28/30
for profile
38/40, 40/60,
40/120
Type Item No. Qty. per box Thread Suitable for profile
pcs.
SM 38 M8 A2 77637 50 M8 27/18 + 38/40
SM 38 M10 A2 64978 50 M10 27/18 + 38/40
L1
L2
– 59 –
Stainless steel programme
T-head bolt HS 38 A2
for profile for profile
38/40 27/18 + 28/30
L1
L2
Channel washer HK A2
D
Type Item No. Qty. per box Hole Suitable for profile
pcs. mm
HK 38 A2 65229 50 10.5 38/40
L1
SW L
– 60 –
Stainless steel programme
Type: G Type: GS
Steel grade 4.6
Hexagonal connector VM A2
– 61 –
Stainless steel programme
Washer U A2
I
S
A
– 62 –
Looking for innovations
– look for fischer.
fischer – the competence
in all questions concerning
fixings.
General fixings
High performance steel fixings
Injection fixings / foam and sealants
Innovative fixings
Wallplug SX
Type Item No. Qty. Outer Drill Min. Plug length Screw Max.
per box carton drill hole = min. anchor- usable
depth ing depth length
pcs./sets pcs./sets mm mm mm mm mm
SX 4 70004 200 4000 4 25 20 2–3 –
SX 5 70005 100 4000 5 35 25 3–4 –
SX 6 70006 100 5000 6 40 30 4–5 –
SX 8 70008 100 2500 8 50 40 4.5–6 –
SX 10 70010 50 1000 10 70 50 6–8 –
SX 12 70012 25 500 12 80 60 8–10 –
SX 14 70014 20 480 14 90 70 10–12 –
SX 16 70016 10 200 16 100 80 12 (1/2) –
SX 6 S/10 70021 50 2500 6 40 30 4.5 x 40 10
SX 8 S/20 70022 50 1200 8 50 40 5 x 60 20
Type Item No. Qty. Outer Drill Min. drill hole Min. Plug Max. fischer
per box carton depth from anchor- length usable safety SW
upper edge age length screw
of component depth size
pcs./sets pcs./sets mm mm mm mm mm mm
with zinc plated and passivated hexagon-head screw and integrated washer
SXS 10 x 60 F US 19599 50 500 10 70 50 60 10 7 x 69 SW13
SXS 10 x 80 F US 19603 50 500 10 90 50 80 30 7 x 89 SW13
SXS 10 x 100 F US 19614 50 250 10 110 50 100 50 7 x 109 SW13
SXS 10 x 120 F US 19619 50 250 10 130 50 120 70 7 x 129 SW13
SXS 10 x 140 F US 19624 50 250 10 150 50 140 90 7 x 149 SW13
SXS 10 x 160 F US 24045 50 – 10 170 50 160 110 7 x 169 SW13
SXS 10 x 180 F US 24046 50 – 10 190 50 180 130 7 x 189 SW13
with A4 stainless steel hexagon-head screw and integrated washer
SXS 10 x 60 F US A4 19600 50 500 10 70 50 60 10 7 x 69 SW13
SXS 10 x 80 F US A4 19628 20 500 10 90 50 80 30 7 x 89 SW13
SXS 10 x 100 F US A4 19615 50 250 10 110 50 100 50 7 x 109 SW13
SXS 10 x 120 F US A4 19620 50 250 10 130 50 120 70 7 x 129 SW13
SXS 10 x 140 F US A4 19626 50 250 10 150 50 140 90 7 x 149 SW13
SXS 10 x 160 F US A4 24062 50 – 10 170 50 160 110 7 x 169 SW13
SXS 10 x 180 F US A4 24063 50 – 10 190 50 180 130 6 x 189 SW13
– 64 –
General Fixings
Z-21.1-1711
Fire resistance
classification
F 30/60/90/120
Type Item No. Qty. Drill Min. Min. Plug Thread Bolt penetration
per box drill hole anchorage length
depth depth min. max.
pcs. mm mm mm mm mm mm
Zinc plated and passivated
FHY M6 30138 50 10 45 30 37 M6 37 45
FHY M8 30146 25 12 50 35 43 M8 43 55
FHY M10 30148 20 16 60 40 52 M10 52 60
Stainless steel A4
FHY M6 A4 30139 50 10 45 30 37 M6 37 45
FHY M8 A4 30147 25 12 50 35 43 M8 43 55
FHY M10 A4 30151 20 16 60 40 52 M10 52 60
Toggles
KDH KD
Type Item No. Qty. Outer Drill Fixing Min. Max. Thread
per box carton length cavity board
depth thickness
pcs. pcs. mm mm mm mm
KD 3 80181 50 250 12 95 27 65 M3 x 90
KD 3 B 80192 10 200 12 95 27 65 M3 x 90
KDH 3 80182 25 125 12 105 27 51 M3 x 80
KD 4 80183 25 125 14 105 34 69 M4 x 100
KD 4 B 80193 10 200 14 105 34 69 M4 x 100
KDH 4 80184 25 125 14 95 34 35 M4 x 80
KD 5 80187 25 125 16 100 70 63 M5 x 100
KDH 5 80188 20 100 16 130 70 60 M5 x 90
KD 6 80185 25 125 16 100 70 63 M6 x 100
KDH 6 80186 20 100 16 130 70 60 M6 x 100
KD 8 80178 20 100 20 100 75 55 M8 x 100
KDH 8 80179 20 100 20 130 75 55 M8 x 100
KM 10 50326 25 25 30 180 140 90 M10 x 180
– 65 –
High Performance Steel Anchors
Fire resistance
classification
from M8 F 90/120
Type Item No. Qty. Outer Drill* Anchoring Max. Thread Spanner
per box carton depth fixing size
length
pcs. pcs. mm mm mm
Zinc plated steel
FZA 10 x 40 M6/10 60712 25 250 10 40 10 M6 10
FZA 12 x 40 M8/15 60715 25 250 12 40 15 M8 13
FZA 14 x 40 M10/25 60718 25 125 14 40 25 M10 17
FZA 12 x 50 M8/15 60716 20 200 12 50 15 M8 13
FZA 14 x 60 M10/25 60719 10 100 14 60 25 M10 17
FZA 18 x 80 M12/25 60721 10 50 18 80 25 M12 19
FZA 22 x 100 M16/60 60724 10 10 22 100 60 M16 24
FZA 22 x 125 M16/80 60725 6 6 22 125 60 M16 24
stainless steel A4
FZA 10 x 40 M6/10 A4 60772 25 250 10 40 10 M6 10
FZA 10 x 40 M6/35 A4 60771 25 250 10 40 35 M6 10
FZA 12 x 40 M8/15 A4 60775 25 250 12 40 15 M8 13
FZA 14 x 40 M10/25 A4 60778 20 100 14 40 25 M10 17
FZA 12 x 50 M8/15 A4 60776 20 200 12 50 15 M8 13
FZA 12 x 50 M8/50 A4 60774 20 200 12 50 50 M8 13
FZA 14 x 60 M10/25 A4 60779 10 100 14 60 25 M10 17
FZA 14 x 60 M10/50 A4 60766 10 100 14 60 50 M10 17
FZA 18 x 80 M12/15 A4 60781 10 50 18 80 25 M12 19
FZA 18 x 80 M12/55 A4 60767 10 50 18 80 55 M12 19
FZA 22 x 100 M16/60 A4 60782 10 10 22 100 60 M16 24
FZA 22 x 125 M16/60 A4 60768 6 6 22 125 60 M16 24
highly corrosion-resistant steel anchor (material 1.4529)
FZA 10 x 40 M6/10 C 96214 25 250 10 40 10 M6 10
FZA 10 x 40 M6/35 C 96361 25 250 10 40 35 M6 10
FZA 12 x 40 M8/15 C 96215 25 250 12 40 15 M8 13
FZA 14 x 40 M10/25 C 96228 25 125 14 40 25 M10 17
FZA 12 x 50 M8/15 C 96227 20 200 12 50 15 M8 13
FZA 12 x 50 M8/50 C 96362 20 200 12 50 50 M8 13
FZA 14 x 60 M10/25 C 96216 10 100 14 60 25 M10 17
FZA 14 x 60 M10/50 C 96358 10 100 14 60 50 M10 17
FZA 18 x 80 M12/25 C 96315 10 50 18 80 25 M12 19
FZA 18 x 80 M12/55 C 96359 10 50 18 80 55 M12 19
FZA 22 x 100 M16/60 C 96364 10 10 22 100 60 M16 24
FZA 22 x 125 M16/60 C 96360 6 6 22 125 60 M16 24
* Drill FZUB see page 62.
– 66 –
High Performance Steel Anchors
Type Item No. Qty. Outer Drill* Anchoring Max. Thread Spanner
per box carton depth fixing size
length
pcs. pcs. mm mm mm
Zinc plated steel
FZA 10 x 50 M8 D/10 60652 25 250 10 40 10 M8 13
FZA 12 x 60 M8 D/10 60653 25 250 12 50 10 M8 13
FZA 12 x 80 M8 D/30 60654 25 250 12 50 30 M8 13
FZA 14 x 80 M10 D/20 60657 10 100 14 60 20 M10 17
FZA 14 x 100 M10 D/40 60658 10 100 14 60 40 M10 17
FZA 18 x 100 M12 D/20 60684 10 50 18 80 20 M12 19
FZA 18 x 130 M12 D/50 60685 10 10 18 80 50 M12 19
FZA 22 x 125 M16 D/25 60663 10 10 22 100 25 M16 24
stainless steel A4
FZA 12 x 50 M8 D/10 A4 60664 25 250 12 40 10 M8 13
FZA 12 x 60 M8 D/10 A4 60665 25 250 12 50 10 M8 13
FZA 12 x 80 M8 D/30 A4 60666 25 250 12 50 30 M8 13
FZA 14 x 80 M10 D/20 A4 60669 10 100 14 60 20 M10 17
FZA 14 x 100 M10 D/40 A4 60670 10 100 14 60 40 M10 17
FZA 18 x 100 M12 D/20 A4 60672 10 50 18 80 20 M12 19
FZA 18 x 130 M12 D/50 A4 60673 10 10 18 80 50 M12 19
FZA 22 x 125 M16 D/25 A4 60675 10 10 22 100 25 M16 24
highly corrosion-resistant steel anchor (material 1.4529)
FZA 12 x 50 M8 D/10 C 96319 25 250 12 40 10 M8 13
FZA 12 x 60 M8 D/10 C 96353 25 250 12 50 10 M8 13
FZA 12 x 80 M8 D/30 C 96354 25 250 12 50 30 M8 13
FZA 14 x 80 M10 D/20 C 96355 10 100 14 60 20 M10 17
FZA 18 x 100 M12 D/20 C 96356 10 50 18 80 20 M12 19
FZA 18 x 130 M12 D/50 C 96357 10 10 18 80 50 M12 19
* Drill FZUB see page 62.
Type Item No. Qty. Outer Drill* Anchoring Thread Bolt penetration
per box carton depth min. max.
pcs. pcs. mm mm mm mm
Zinc plated steel
FZA 12 x 40 M6 I 60758 25 250 12 40 M6 8 13
FZA 14 x 60 M8 I 60760 20 200 14 60 M8 11 17
FZA 18 x 80 M10 I 60761 10 100 18 80 M10 13 27
FZA 22 x 100 M12 I 60763 10 10 22 100 M12 15 25
FZA 22 x 125 M12 I 60769 10 10 22 125 M12 15 25
stainless steel A4
FZA 12 x 40 M6 I A4 60783 25 250 12 40 M6 8 13
FZA 12 x 50 M6 I A4 60784 25 250 12 50 M6 8 13
FZA 14 x 60 M8 I A4 60786 20 200 14 60 M8 11 17
FZA 18 x 80 M10 I A4 60787 10 100 18 80 M10 13 21
FZA 22 x 100 M12 I A4 60788 10 10 22 100 M12 15 25
FZA 22 x 125 M12 I A4 60770 10 10 22 125 M12 15 25
* Drill FZUB see page 62.
– 67 –
High Performance Steel Anchors
Fire resistance
classification
F 90
Type Item No. Qty. Outer Drill Anchoring Thread Bolt penetration
per box carton depth min. max.
pcs. pcs. mm mm mm mm
electroplated steel
FZEA 10 x 40 M6 60694 100 500 10 40 M8 11 17
FZEA 12 x 40 M10 60695 100 500 12 40 M10 13 19
FZEA 14 x 40 M12 60696 50 250 14 40 M12 15 21
stainless steel A4
FZEA 10 x 40 M8 A4 60697 100 500 10 40 M8 11 17
FZEA 12 x 40 M10 A4 60698 100 500 12 40 M10 13 19
FZEA 14 x 40 M12 A4 60699 50 250 14 40 M12 15 21
highly corrosion-resistant steel anchor (material 1.4529)
FZEA 10 x 40 M8 C 96236 100 500 10 40 M8 11 17
FZEA 12 x 40 M10 C 96237 100 500 12 40 M10 13 19
FZEA 14 x 40 M12 C 96238 50 250 14 40 M12 15 21
– 68 –
High Performance Steel Anchors
Type Item No. Qty. per box Outer carton Suitable for
pcs. pcs.
FZUB 10 x 40 60622 1 1 FZEA 10 x 40
FZUB 12 x 40 60623 1 1 FZEA 12 x 40
FZUB 14 x 40 60624 1 1 FZEA 14 x 40
Type Item No. Qty. per box Outer carton Suitable for
pcs. pcs.
FZED 10 x 40 M8 60622 1 10 FZEA 10 x 40
FZED 12 x 40 M10 60623 1 10 FZEA 12 x 40
FZED 14 x 40 M12 60624 1 10 FZEA 14 x 40
Type Item No. Qty. per box Outer carton Suitable for
pcs. pcs.
FZEM 10 x 40 M8 60648 1 10 FZEA 10 x 40
FZEM 12 x 40 M10 60649 1 10 FZEA 12 x 40
FZEM 14 x 40 M12 60650 1 10 FZEA 14 x 40
– 69 –
High Performance Steel Anchors
Fire resistance
classification
from M8 F 90
Type Steel Qty. Outer Drill Min. Effect. Fixing Max. Thread Width
gvz A4 High corr.- per box carton drill hole anchor- length usable across
resist. steel depth for age length nut
(1.4529) through depth
fixings
Item No. Item No. Item No. pcs. pcs./sets mm mm mm mm
FAZ 8/10 14611 68550 90198 50 250 8 75 45 75 10 M8 13
FAZ 8/10 GS 16079 – 90199 50 50 8 75 45 75 10 M8 13
FAZ 8/30 14612 68552 90200 50 50 8 95 45 95 30 M8 13
FAZ 8/50 14613 68553 91069 50 250 8 115 45 115 50 M8 13
FAZ 8/100 14614 – – 25 25 8 165 45 165 100 M8 13
FAZ 8/150 14615 – – 20 20 8 215 45 215 150 M8 13
FAZ 10/10 14616 68555 90201 50 250 10 90 60 93 10 M10 17
FAZ 10/10 GS 16080 70450 90202 50 50 10 90 60 93 10 M10 17
FAZ 10/30 14617 68556 90203 25 25 10 110 60 113 30 M10 17
FAZ 10/50 14618 68557 – 20 100 10 130 60 133 50 M10 17
FAZ 10/80 14619 – – 20 20 10 160 60 163 80 M10 17
FAZ 10/100 14620 68558 – 20 20 10 180 60 183 100 M10 17
FAZ 10/150 14621 – – 20 20 10 230 60 233 150 M10 17
FAZ 12/10 14622 68560 90204 20 100 12 105 70 108 10 M12 19
FAZ 12/10 GS 16081 70456 90205 20 20 12 105 70 108 10 M12 19
FAZ 12/30 14623 68561 90206 20 20 12 125 70 128 30 M12 19
FAZ 12/50 14624 68562 – 20 100 12 145 70 148 50 M12 19
FAZ 12/80 14625 – – 20 20 12 170 70 178 80 M12 19
FAZ 12/100 14626 68564 – 20 20 12 195 70 198 100 M12 19
FAZ 12/150 14627 – – 10 10 12 245 70 248 150 M12 19
FAZ 12/200 14628 – – 10 10 12 295 70 298 200 M12 19
FAZ 16/25 14629 68565 90207 10 50 16 140 85 146 25 M16 24
FAZ 16/50 14630 68567 – 10 50 16 165 85 171 50 M16 24
FAZ 16/100 14631 68568 – 10 10 16 215 85 221 100 M16 24
FAZ 16/150 14632 – – 10 10 16 265 85 271 150 M16 24
FAZ 16/150 GS 16082 – – 10 10 16 265 85 271 150 M16 24
FAZ 16/200 14633 – – 10 10 16 315 85 321 200 M16 24
FAZ 16/200 GS 16083 – – 10 10 16 315 85 321 200 M16 24
FAZ 16/250* 14634 – – 10 10 16 365 85 371 250 M16 24
FAZ 16/300* 14635 – – 10 10 16 415 85 421 300 M16 24
FAZ 20/30 14636 90678 – 5 5 20 160 100 172 30 M20 30
FAZ 20/60 14637 – – 5 5 20 190 100 202 60 M20 30
FAZ 20/150 14638 – – 5 5 20 280 100 292 150 M20 30
FAZ 24/30 14639 90679 – 5 5 24 185 125 204 30 M24 36
FAZ 24/60 14642 – – 5 5 24 215 125 234 60 M24 36
GS = with larger washer.
* Not included in the approval notice.
– 70 –
High Performance Steel Anchors
Bolt FBN
Fire resistance
classification
F 90
Type Im- Steel Steel Qty. Outer Drill Min. Min. Overall Max. Thread
print gvz A4 per box carton drill hole anchor- length usable
on depth for age length
head through depth
fixings
Item No. Item No. pcs. pcs./sets mm mm mm mm mm x mm
FBN 6/5* – 45130 – 100 500 6 45 20 40 5 M6 x 16
FBN 6/10* – 45136 – 100 500 6 50 25 55 10 M6 x 30
FBN 6/10 – – 69087 100 100 6 65 40 68 10 M6 x 25
FBN 6/30* – 45137 – 100 500 6 70 25 75 30 M6 x 30
FBN 6/30 – – 69088 100 100 6 85 40 88 30 M6 x 30
FBN 8/5 – 45131 – 100 500 8 55 35 58 5 M8 x 23
FBN 8/10+23 B 45138 69089 50 250 8 73 48/35 76 10/23 M8 x 41
FBN 8/30+43 F 45139 69090 50 250 8 93 48/35 96 30/43 M8 x 61
FBN 8/50+63 K 45140 69091 50 250 8 113 48/35 116 50/63 M8 x 81
FBN 8/100+113 P 45141 – 25 25 8 163 48/35 166 100/113 M8 x 130
FBN 10/5 – 45132 – 50 250 10 65 42 69 5 M10 x 31
FBN 10/15+23 C 45142 69092 50 250 10 83 50/42 89 15/23 M10 x 51
FBN 10/35+43 G 15399 – 50 50 10 103 50/42 109 35/43 M10 x 71
FBN 10/50+58 K 45143 69093 20 100 10 118 50/42 124 50/58 M10 x 87
FBN 10/100+108 P 45144 69094 20 100 10 168 50/42 174 100/108 M10 x 134
FBN 10/140+148 S 45145 – 20 100 10 208 50/42 214 140/148 M10 x 174
FBN 10/160+168 T 45146 – 20 100 10 228 50/42 234 160/168 M10 x 194
FBN 12/5 – 45133 – 20 100 12 75 50 83 5 M12 x 41
FBN 12/15+35 C 45147 69095 20 100 12 105 70/50 113 15/35 M12 x 71
FBN 12/30+50 F 45148 – 20 100 12 120 70/50 128 30/50 M12 x 86
FBN 12/45+65 I 45149 69096 20 100 12 135 70/50 143 45/65 M12 x 103
FBN 12/100+120 P 45150 69097 20 20 12 190 70/50 202 100/120 M12 x 157
FBN 16/10 – 45134 69098 10 50 16 98 64 109 10 M16 x 54
FBN 16/25+45 E 45151 69099 10 50 16 133 84/64 144 25/45 M16 x 89
FBN 16/50+70 K 45152 69100 10 50 16 158 84/64 169 50/70 M16 x 114
FBN 16/100+120 P 45153 – 10 50 16 208 84/64 221 100/120 M16 x 166
* not included in approval notice.
1) Min. embedment depth for maximum permitted load/the minimum embedment depth can be
reduced to . . . for the extended effective length and reduced load.
2) Embedment length for maximum permissible load/embedment length for reduced load.
Type Im- Item No. Qty. Outer Drill Min. Min. Overall Max. Thread
print per box carton drill hole anchor- length usable
on depth for age length
head through depth
fixings
pcs. pcs./sets mm mm mm mm mm x mm
FBN – zinc plated and passivated steel
FBN 20/10* – 45135 10 10 20 111 70 120 10 M20 x 50
FBN 20/20 – 45154 10 10 20 151 100 165 20 M20 x 50
FBN 20/60 – 45155 10 10 20 191 100 205 60 M20 x 90
FBN 20/120 – 45156 10 10 20 251 100 265 120 M20 x 90
FBN 20/250 – 45157 5 5 20 381 100 395 250 M20 x 90
* not included in approval notice.
– 71 –
High Performance Steel Anchors
Bolt FBN
Fire resistance
classification
F 90
Type Steel Qty. Outer Drill Min. Min. Overall Max. Thread
fvz* per box carton drill hole anchor- length usable
depth for age length
through depth
fixings
Item No. pcs. pcs./sets mm mm mm mm mm x mm
FBN – fvz (hot dipped galvanized)
FBN 8/5 fvz 57525 100 500 8 55 35 58 5 M8 x 23
FBN 8/10 fvz 57526 50 250 8 73 48 76 10 M8 x 41
FBN 8/50 fvz 57527 50 250 8 113 48 116 50 M8 x 81
FBN 8/100 fvz 57528 25 25 8 163 48 166 100 M8 x 130
FBN 10/5 fvz 57529 50 250 10 65 42 69 5 M10 x 31
FBN 10/15 fvz 57530 50 250 10 83 50 89 15 M10 x 51
FBN 10/50 fvz 57531 20 100 10 118 50 125 50 M10 x 87
FBN 10/100 fvz 57532 20 100 10 168 50 174 100 M10 x 134
FBN 10/140 fvz 57533 20 100 10 208 50 214 140 M10 x 174
FBN 12/5 fvz 57534 20 100 12 75 50 83 5 M12 x 41
FBN 12/15 fvz 57535 20 100 12 105 70 113 15 M12 x 71
FBN 12/30 fvz 57536 20 100 12 120 70 128 30 M12 x 86
FBN 12/45 fvz 57537 20 100 12 135 70 143 45 M12 x 103
FBN 12/100 fvz 57538 20 20 12 190 70 202 100 M12 x 157
FBN 16/10 fvz 57539 10 50 16 98 64 109 10 M16 x 54
FBN 16/25 fvz 57540 10 50 16 133 84 144 25 M16 x 89
FBN 16/50 fvz 57541 10 50 16 158 84 169 50 M16 x 114
FBN 16/100 fvz 57542 10 50 16 208 84 221 100 M16 x 166
* Not included in approval notice.
Type Im- Item No. Qty. Outer Drill Min. Min. Overall Max. Thread
print per box carton drill hole anchor- length usable
on depth for age length
head through depth
fixings
pcs. pcs./sets mm mm mm mm mm x mm
FBN – with large washer according to DIN 440, outside diameter approx. 3.5 x d
FBN 12/ 80+100 GS N 45160 20 20 12 170 70/50 182 80/100 M12 x 137
FBN 12/100+120 GS P 45161 20 20 12 190 70/50 202 100/120 M12 x 157
FBN 12/120+140 GS R 45162 20 20 12 210 70/50 222 120/140 M12 x 177
FBN 12/140+160 GS S 45163 10 10 12 230 70/50 242 140/160 M12 x 100
FBN 12/160+180 GS T 45164 10 10 12 250 70/50 262 160/180 M12 x 100
FBN 12/200+220 GS V 45165 10 10 12 290 70/50 302 200/220 M12 x 100
FBN 12/250+270 GS W 45166 10 10 12 340 70/50 352 250/270 M12 x 100
FBN 16/100+120 GS P 45167 10 10 16 208 84/64 221 100/120 M16 x 166
FBN 16/140+160 GS S 45168 10 10 16 248 84/64 261 140/160 M16 x 100
FBN 16/160+180 GS T 45169 10 10 16 268 84/64 281 160/180 M16 x 100
FBN 16/200+220 GS V 45170 10 10 16 308 84/64 321 200/220 M16 x 100
FBN 16/250+270 GS W 45171 10 10 16 358 84/64 371 250/270 M16 x 100
FBN 16/300+320 GS X 45172 10 10 16 408 84/64 421 300/320 M16 x 100
1) Min. embedment depth for maximum permitted load/the minimum embedment depth can be
reduced to . . . for the extended effective length and reduced load.
2) Embedment length for maximum permissible load/embedment length for reduced load.
– 72 –
High Performance Steel Anchors
Hammerset anchors EA
Z-21.1-1619
Fire resistance
classification
from M8 F 120
Type Item No. Qty. Outer Drill Min. Min. Anchor Thread Bolt penetration
per box carton drill hole anchoring length mm
depth depth
pcs. pcs. mm mm mm mm min. max.
electroplated steel
EA M6 60811 100 1000 8 25 25 25 M6 6 12
EA M8 60812 100 1000 10 30 30 30 M8 8 13
EA M8 x 40 60821 50 500 10 40 40 40 M8 8 20
EA M10 60813 50 500 12 40 40 40 M10 10 17
EA M12 60814 25 250 15 50 50 50 M12 12 22
EA M16 60816 20 100 20 65 65 65 M16 16 27
EA M20 60818 10 50 25 80 80 80 M20 20 34
stainless steel A4
EA M6 A4 60825 100 1000 8 25 25 25 M6 6 12
EA M8 A4 60526 100 1000 10 30 30 30 M8 8 13
EA M10 A4 60827 50 500 12 40 40 40 M10 10 17
EA M12 A4 60828 25 250 15 50 50 50 M12 12 22
EA M16 A4 60829 20 100 20 65 65 65 M16 16 27
steel electroplated, for diamond drills and diamond saws
EA M12 D 77094 25 250 16 50 50 50 M12 12 22
Inch sizes on request.
– 73 –
High Performance Steel Anchors
Fire resistance
classification
F 60/90/120
Type Item No. Qty. Outer Drill Min. drill hole Min. Anchor Max.
per box carton depth/push-through anchoring length usable
installation depth length
pcs. pcs. mm mm mm mm mm
FNA 6 x 30/5 50938 100 1000 6 50 30 45 5
FNA 6 x 30/30 50940 50 500 6 75 30 71 30
FNA 6 x 30/50 50942 50 500 6 95 30 91 50
FNA 6 x 30/75 50941 50 500 6 115 30 111 75
FNA 6 x 30/100 50943 50 250 6 150 30 145 100
FNA 6 x 30/120 50944 50 250 6 170 30 165 120
FNA 6 x 40/5 50936 50 500 6 60 40 55 5
Fire resistance
classification
F 60/90
Type Item No. Qty. Outer Drill Min. drill hole Min. Anchor Max.
per box carton depth/push-through anchoring length usable
installation depth length
pcs. pcs. mm mm mm mm mm
FNA 6 x 40 S 50947 50 500 6 60 40 55 5
Fire resistance
classification
F 60/90
Type Item No. Qty. Outer Drill Min. drill hole Min. Anchor Max. Spanner Thread
per box carton depth/push-through anchoring length usable size
installation depth length
pcs. pcs. mm mm mm mm mm
FNA 6 x 30 M6/5 50920 100 1000 6 50 30 52 5 10 M6
FNA 6 x 40 M8/5 50951 50 500 6 55 40 55 5 13 M8
FNA 6 x 40 M8-15 OM 50952 50 500 6 55 40 65 15 13 M8
– 74 –
High Performance Steel Anchors
Type Item No. Qty. Outer Drill Min. drill hole Min. Anchor
per box carton depth/push-through anchoring length
installation depth
pcs. pcs. mm mm mm mm
FNA 6 x 30 OE 50922 50 500 6 45 30 64
Type Item No. Qty. Outer Drill Min. drill hole Min. Anchor
per box carton depth/push-through anchoring length
installation depth
pcs. pcs. mm mm mm mm
FNA 6 x 30 H 50921 50 500 6 45 30 64
– 75 –
Notes
– 76 –
Dimensions and weights of pipes
Nominal diameter, external diameter and weights of different types of pipes
– 77 –
Dimensions and weights of pipes
Nominal diameter, external diameter and weights of different types of pipes
Drain pipes cast iron, SML Drain pipe, GA, DIN 19500
DN Pipe Pipe weight: Span DN Pipe Pipe weight: Span
external empty filled with water external empty filled with water
[mm] [kg/m] [kg/m] [m] [mm] [kg/m] [kg/m] [m]
40 48 3.0 4.4 1) 40 50 0.2 1.3 1)
50 58 4.3 6.4 1) 50 63 0.3 2.0 1)
70 78 5.9 9.9 1) 70 75 0.5 3.9 1)
100 110 8.4 17.7 1) 100 110 1.0 8.0 1)
125 135 11.8 24.5 1) 125 125 1.4 12.4 1)
150 160 14.1 32.3 1) 150 160 2.2 18.0 1)
200 210 23.1 54.6 1)
250 274 33.3 87.7 1)
300 326 43.2 120.8 1)
400 429 75.5 208.8 1)
500 532 104.3 311.8 1)
Spiral duct, round DIN 24145
DN Pipe Sheet metal Pipe weight:
external thickness empty
[mm] [mm] [kg/m]
Drain pipes, PVC – hard, DIN 8062 71 75 0.4 0.8
80 84 0.4 0.9
DN Pipe Pipe weight: Span 90 94 0.4 1.0
external empty filled with 20 °C 40 °C 100 105 0.6 1.7
water 112 117 0.6 1.9
[mm] [kg/m] [kg/m] [m] [m] 125 130 0.6 2.1
40 50 0.2 1.3 0.8 0.6 140 145 0.6 2.4
50 63 0.3 2.0 1.1 0.7 150 155 0.6 2.6
70 75 0.5 3.9 1.3 0.8 160 165 0.6 2.7
100 110 1.0 8.0 1.6 1.0 180 185 0.6 3.1
125 125 1.4 12.4 1.8 1.1 200 205 0.6 3.4
150 160 2.2 18.0 2.2 1.2 224 229 0.6 3.8
250 255 0.6 4.2
280 285 0.6 4.7
300 307 0.8 5.2
LORO-X steel drain pipe 315 322 0.8 7.1
355 362 0.8 8.0
DN Pipe Pipe weight: Span 400 407 0.8 9.0
external empty filled with water 450 457 0.8 10.2
[mm] [kg/m] [kg/m] [m] 500 507 0.8 11.3
40 42 1.5 2.7 1) 560 567 0.8 12.6
50 53 2.2 4.2 1) 600 609 1.0 13.5
70 73 3.3 7.1 1) 630 639 1.0 17.7
80 89 4.1 9.9 1) 710 719 1.0 20.0
100 102 5.8 13.3 1) 800 810 1.0 22.5
125 133 9.6 22.5 1) 900 1012 1.0 25.4
150 159 11.5 30.1 1) 1000 1012 1.2 34.9
200 219 21.5 57.2 1) 1120 1132 1.2 39.1
250 273 22.5 78.5 1) 1250 1262 1.2 43.7
300 324 25.0 104.4 1)
Drain pipe, PE
DN Pipe Pipe weight: Span
external empty filled with 20 °C 40 °C
water
[mm] [kg/m] [kg/m] [m] [m]
26 32 0.3 0.8 0.8 0.6
34 40 0.3 1.3 0.9 0.7
40 50 0.4 2.0 1.0 0.7
50 56 0.5 2.5 1.0 0.8
57 63 0.6 3.1 1.2 0.9 These values are based on permissible deflection of pipe manufac-
70 75 0.7 4.4 1.2 0.9 turers recommendations, the permissible loads for pipe fixings and
80 90 1.0 6.4 1.2 1.0 support have taken into account.
100 110 1.4 9.5 1.4 1.1
115 125 1.8 12.3 1.4 1.1 1) Approx. 1.50 m.
125 140 2.3 15.4 1.4 1.1 With reference to the manufacturers informations pipes must be
150 160 3.0 20.1 1.5 1.2 supported with at least two fixing points.
200 200 3.8 31.5 1.7 1.3
250 250 6.0 49.2 1.8 1.5 Please consider the information of the pipe producer.
– 78 –
Expansion diagram of raw materials
Example:
Copper pipe, Cu length of tube 30 m
Temperature difference ∆T = 50°K
Linear thermal expansion ∆L = 24.75 mm
PVC-pipe, length of pipe L = 40 m
Temperature difference ∆T = 40°K
Linear thermal expansion ∆L = 128 mm (table value x10)
∆ L = L · ∆ T ·
[mm] [m] [K] [mm/m K]
– 79 –
Load-bearing capacity of fischer channels
300
1
250
Force in N
3
200 2
150 4
100
50
700
Load application, example 3 600
4
500
400
300
200
100
0
0 500 1000 1500 2000
Span in mm
2
1900
3
1700
1500
1300
4
1100
900
700
500
300
For the load diagrams, the permissible steel 0 500 1000 1500 2000
tension σ perm = 160 N/mm2 and the max. Span in mm
deflection L/200 were not exceeded.
– 80 –
Load-bearing capacity of fischer channels
10000 1600
Example: 1500 Example:
9000 Length l = 1200 mm 1400 Length l = 4000 mm
Load application example 4 Load application example 1
1 1300
8000 Perm./observed load F = 1452 N (145.2 kg) Perm./observed load F = 679 N (67.9 kg)
1200
2
7000 1100
1
1000
Force in N
6000
Force in N
2
900
5000 800
3
700
4000 3
600
3000 500
4 400
2000 300
200
1000 4
100
0 0
0 500 1000 1500 2000 2500 3000 3000 3500 4000 4500 5000 5500 6000
Span in mm Span in mm
11000 3500
Example: Example:
10000 3250 Length l = 4500 mm
Length l = 1500 mm 1
Load application example 4 3000 Load application example 4
9000 Perm./observed load F = 3443 N (344.3 kg) Perm./observed load F = 932 N (93.2 kg)
2750
8000 2
1 2500
7000 3 2250
Force in N
2
Force in N
3
2000
6000
4 1750
5000
1500
4000 1250
3000 1000
750
2000 4
500
1000 250
0 0
0 500 1000 1500 2000 2500 3000 3000 3500 4000 4500 5000 5500 6000
Span in mm Span in mm
1500 1500
Example: Example:
1400 Length l = 1000 mm 1400 Length l = 1000 mm
1300 Load application example 4 1300 Load application example 4
Perm./observed load F = 195 N (19.5 kg) Perm./observed load F = 160 N (16.0 kg)
1200 1200
1100 1100
1 1
1000 1000
Force in N
Force in N
900 900
800 800
700 700
2
600 600
2
500 500
4 3 3
400 400
4
300 300
200 200
100 100
0 0
0 500 1000 1500 2000 2500 3000 0 500 1000 1500 2000 2500 3000
Span in mm Span in mm
– 81 –
Load-bearing capacity of fischer channels
5000 600
Example:
Length l = 1000 mm Example:
4500 Length l = 4500 mm
Load application example 1
Perm./observed load F = 2026 N (202.6 kg) 500 Load application example 1
4000 1 Perm./observed load F = 182 N (18.2 kg)
3500
1 400
Force in N
Force in N
3000
3
2500 300
2 2
2000
4
3 200
1500
1000
100
4
500
0 0
0 500 1000 1500 2000 2500 3000 3000 3500 4000 4500 5000 5500 6000
Span in mm Span in mm
5000 600
Example:
Length l = 1000 mm Example:
4500 Length l = 4500 mm
Load application example 1
Perm./observed load F = 1879 N (187.9 kg) 500 Load application example 1
4000 1 Perm./observed load F = 182 N (18.2 kg)
3500
1 400
Force in N
Force in N
3000
3
2500 300
2 2
2000
4
3 200
1500
1000
100
4
500
0 0
0 500 1000 1500 2000 2500 3000 3000 3500 4000 4500 5000 5500 6000
Span in mm Span in mm
For the load diagrams, the permissible steel tension σ perm = 160 N/mm2 and the max. deflection L/200 were not exceeded.
– 82 –
Load and bending moments of fischer channels
Profile 27/18
Span of channel in cm L = 50 L = 75 L = 100 L = 150
Max. permissible load on a point FMiddle in kN: 0.43 0.29 0.18 0.08
Deflection f Middle in mm
at a point load of: 0.25 kN 0.86 2.91 – –
Profile 28/30
Span of channel in cm L = 50 L = 75 L = 100 L = 150
Max. permissible load on a point FMiddle: 1.30 0.87 0.65 0.40
Deflection f Middle in mm
at a point load of: 0.25 kN 0.18 0.59 1.40 4.73
0.50 kN 0.35 1.18 2.80 –
0.75 kN 0.53 1.77 4.20 –
1.00 kN 0.70 – – –
1.25 kN 0.88 – – –
Profile 38/40
Span of channel in cm L = 50 L = 75 L = 100 L = 150 L = 200
Max. permissible load on a point FMiddle in kN: 3.07 2.05 1.53 1.02 0.68
Deflection f Middle in mm
at a point load of: 0.25 kN 0.06 0.19 0.46 1.55 3.68
0.50 kN 0.12 0.39 0.92 3.11 7.36
0.75 kN 0.17 0.58 1.38 4.66 –
1.00 kN 0.23 0.78 1.84 6.21 –
1.25 kN 0.29 0.97 2.30 – –
1.50 kN 0.35 1.16 2.76 – –
1.75 kN 0.40 1.36 – – –
2.00 kN 0.46 1.55 – – –
2.50 kN 0.52 – – – –
3.00 kN 0.58 – – – –
The values for the max. permissible point load are based on the max. permissible steel tension σperm = 160 N/mm2.
– 83 –
Load and bending moments of fischer channels
Fmiddle
f middle
Profile 40/60
Span of channel in cm L = 50 L = 75 L = 100 L = 150 L = 200 L = 300 L = 600
Max. permissible load on a point FMiddle in kN: 8.42 5.61 4.21 2.80 2.10 1.20 0.30
Deflection f Middle in mm
at a point load of: 0.25 kN 0.01 0.05 0.12 0.39 0.92 3.11 24.85
0.50 kN 0.03 0.10 0.23 0.78 1.84 6.21 –
0.75 kN 0.04 0.15 0.35 1.16 2.76 9.32 –
1.00 kN 0.06 0.19 0.46 1.55 3.68 12.42 –
1.25 kN 0.07 0.24 0.58 1.94 4.60 – –
1.50 kN 0.09 0.29 0.69 2.33 5.52 – –
1.75 kN 0.10 0.34 0.81 2.72 6.44 – –
2.00 kN 0.12 0.39 0.92 3.11 7.36 – –
2.50 kN 0.13 0.44 1.04 3.49 – – –
3.00 kN 0.14 0.49 1.15 – – – –
Profile 40/120
Span of channel in cm L = 50 L = 75 L = 100 L = 150 L = 200 L = 300 L = 600
Max. permissible load on a point FMiddle in kN: 24.97 16.64 12.48 8.31 6.23 4.14 1.63
Deflection f Middle in mm
at a point load of: 0.25 kN 0.00 0.01 0.02 0.07 0.17 0.57 4.58
0.50 kN 0.01 0.02 0.04 0.14 0.34 1.14 9.15
0.75 kN 0.01 0.03 0.06 0.21 0.51 1.72 13.73
1.00 kN 0.01 0.04 0.08 0.29 0.68 2.29 18.30
1.25 kN 0.01 0.04 0.11 0.36 0.85 2.86 22.88
1.50 kN 0.02 0.05 0.13 0.43 1.02 3.43 27.45
1.75 kN 0.02 0.06 0.15 0.50 1.19 4.00 –
2.00 kN 0.02 0.07 0.17 0.57 1.36 4.58 –
2.50 kN 0.02 0.08 0.19 0.64 1.53 5.15 –
3.00 kN 0.03 0.09 0.21 0.71 1.69 5.72 –
– 84 –
Master gauge for holes in the fischer channels
Channel 27/18
Channel 28/30
Channel 38/40
– 85 –
Master gauge for holes in the fischer channels
Channel 40/60
20
3
13
17
40
40 20 60
Channel 40/120
20
3
13
17
40
40 20 60 60
L 120
Channel FUS 21
R
4 20,6
28 ,7
5
2,5
41,3
22,3
14
50 16,5 7,5
Channel FUS 41
R
28 41,3
4
,7
5
2,5
41,3
22,3
14
50 16,5 7,5
– 86 –
Load-bearing capacity of the fischer cantilever brackets
Example:
9000 Length l = 100 mm
Load application example 4
8000 Perm./observed load F = 363 N (36.3 kg)
7000
Force in N
6000
2+3 1
5000 4
4000
3000
2000
1000
Load application, example 2 0
0 50 100 150 200 250 300
Length in mm
1
2000
2+3
1000
4
0
100 200 300 400 500
Length in mm
Example:
4500 Length l = 300 mm
Load application example 1
4000 Perm./observed load F = 2559 N (255.9 kg)
1
3500
3000
Force in N
2500
2+3
2000
1500
1000
4
For the load diagrams, the permissible steel 500
tension σ = 160 N/mm and the max. deflection 0
l/300 were not exceeded. Load-bearing capacity
100 200 300 400 500 600
stated for brackets. The fixings and screws
must be placed and installed according to the Length in mm
loads.
– 87 –
Load-bearing capacity of angle brackets and bracket constructions
WK 100/100 on request.
WK 200/200
Length l in mm: 350 500 650
160
WK 207/160
Length l in mm: 350 500 650
Fmax. in kN: 1.20 0.7 0.45
– 88 –
Load-bearing capacity of angle brackets and bracket constructions
– 89 –
Load-bearing capacity of beam clamps and channel nuts
F
fischer channel nut HG 27
Type Profile FZ FQ Torque speci-
in N in N fication Nm
HG 27 M6 27/18 1700 200 8
28/30 2000 200 8
HG 27 M8 27/18 1700 400 10
28/30 2000 400 10
HG 27 M10 27/18 1700 500 15
28/30 2200 500 15
FZ
fischer sliding nut SM 38
Type Profile FZ FQ Torque speci-
in N in N fication Nm
SM 38 M8 27/18 1700 500 20
28/30 2500 600 20
38/40 3300 400 20
40/60 4700 700 20
SM 38 M10 27/18 1700 1000 30
28/30 2500 900 30
FQ
38/40 3600 500 30
40/60 4700 800 30
– 90 –
Load-bearing capacity of beam clamps and channel nuts
FZ
38/40 3500 500 15
40/60 4000 600 15
FQ
fischer T-head bolt FHS CLIX-N
Type Profile FZ FQ Torque speci-
in N in N fication Nm
FHS CLIX-N 27/18 1500 200 8
28/30 1700 250 8
– 91 –
Load and bending moments for set screws
Permissible load on deflection for set screws (4.6) and threaded pipes
Maximum deflection: fmax. = < 3 mm
Permissible steel tension: σzul. = 160 N/mm2
700
M 12
600
M 16
500
400
M 10
300
200
M8
100
0
0 50 100 150 200 250 300 l (mm)
F (N) 4000
3500
3000
1"
2500
2000
3/4"
1500
1/2"
1000
500
– 92 –
Units and formulae
– 93 –
SaMontec application examples
Single installations
fischer
pipe clamp
fischer multi-connector
– 94 –
SaMontec application examples
fischer fixing with internal thread fischer fixing with external thread
e.g. EA, FZEA, FZA-I e.g. FAN, FZA
– 95 –
SaMontec application examples
fischer
sliding
fischer sliding hanger carriage
fischer
threaded rod
fischer
pipe clamp
fischer pipe clamp
– 96 –
SaMontec application examples
Channels/tracks
fischer channel
fischer channel
fischer
installation fischer
angle bracket channel
We generally recommend to cover the ends of brackets and channels with cover caps.
– 97 –
SaMontec application examples
Channels/crossheads
fischer channel
fischer
pipe clamp
fischer
T-head bolt
fischer channel
– 98 –
SaMontec application examples
Brackets
fischer channel
fischer channel
fischer
fischer channel fischer pipe clamp
angle bracket washer
– 99 –
SaMontec application examples
– 100 –
SaMontec application examples
Beam fixings
fischer channel
fischer T-head bolt
– 101 –
Pool of Information
Usage:
Advantages:
All the entered data is processed using the Live internet access facility to update current
actual DIN-values (length, breath, thickness, programmes
area and volume etc.)
Multi-language facility to calculate in one
Continuous background calculations are per- language and print in another
manently carried out to ensure overall accu-
racy
– 102 –
Notes
– 103 –
Notes
– 104 –
Notes
– 105 –
Notes
– 106 –