You are on page 1of 2

Data sheet

Tellabs 8605 Access Switch


®

The Tellabs® 8605 Access Switch is a compact and fully managed mobile cell site node with
multiprotocol support. It is designed for cost-efficient delivery of 2G and 3G voice and data services
over the common network infrastructure.

Overview
The Tellabs® 8600 Managed Edge System provides a complete
network solution comprising of the Tellabs® 8660 Edge Switch, the
Tellabs® 8630, the Tellabs® 8620, the Tellabs® 8605 and Tellabs®
8607 Access Switches, the Tellabs® 8606 Ethernet Aggregator
and the Tellabs® 8000 Network Manager, an advanced network
management system for managing the entire network and all of
its connections and services.

Thanks to its small size, the Tellabs 8605 switch is optimal for
service providers’ access networks at small traffic aggregation
points or cell sites. A diverse set of different access and uplink
Figure 1. The Tellabs® 8605 Access Switch
interfaces offer cost-efficient alternatives for backhaul and provide
flexibility for the future of mobile evolution. Versatile service
capabilities, including support for TDM, ATM, HDLC and Ethernet Access device for Ethernet and IP networks
connections as well as IP routing, enable the migration of 2G The Tellabs 8605 switch provides the necessary features and
TDM and 3G ATM, Ethernet or IP-based networks into a single interfaces to support Ethernet and IP-based packet networking.
network infrastructure. The Tellabs 8605 switch has packet-based It is a future-proof solution providing a transport solution for both
forwarding with QoS support enabling network optimization for the existing and the future Ethernet and IP-based mobile networks
voice and data services. and emerging WiMAX installations.

The Tellabs 8605 switch is available in different variants: Multiservice support


The Tellabs 8605 switch supports the transport of voice and
• The Tellabs 8605-A switch provides the main functionality as data services in GSM, CDMA, CDMA-2000 EV-DO and WCDMA
well as Abis optimization in the upcoming release. R99/R5 networks. Advanced quality of service features enable the
• The Tellabs 8605-B switch includes a highly accurate oscillator differentiation of real-time voice and video services from premium
for adaptive timing performance in challenging conditions. and best effort data services.
• The Tellabs 8605-D switch variant provides two unchannelized
DS3 ports. Multiprotocol support
GSM, CDMA, CDMA-2000 EV-DO and WCDMA R99/R5 use
Features and Benefits TDM, HDLC, ATM, Ethernet and IP protocols for carrying user
Small size and signaling traffic. The Tellabs 8605 switch supports all these
The height of the unit is 1RU, which enables cost-effective installations alternatives, enabling the convergence of existing networks into
in access and cell sites where the rack space is limited. a single Ethernet and IP infrastructure.

Wide temperature range Quality of Service testing in packet networks


The operating temperature of the Tellabs 8605 switch is -40°C to The Tellabs 8600 system has a unique packet loop test feature
+65°C, allowing installations in cabinets without climate control. that enables the testing of quality of service parameters including
delay, jitter, throughput and connectivity. Delay and jitter testing is
Robust synchronization nonintrusive, therefore it can be performed even if the service is
Mobile networks are very sensitive to synchronization. Traditionally alive. Test endpoints are selected using the Tellabs 8000 manager
synchronization has been delivered using syncronous line without the need for additional hardware or site visits. The Packet
signals, but new packet-based transport requires packet-based Loop Test feature allows the user to confirm that the packet network
synchronization delivery. The Tellabs 8605 switch supports both meets the QoS requirements of voice, video and data services.
TDM and packet-based synchronization techniques.
Advanced packet network management
Cost effective migration from E1 and T1 to Ethernet As part of the Tellabs 8600 system, the Tellabs 8605 switch is fully
Most of the existing mobile base stations and Node Bs use E1/T1 end-to-end managed with the Tellabs 8000 manager. All interface,
interfaces. The Tellabs 8605 switch provides a cost-efficient way of service and connection level parameters are configured remotely via
converting a mobile access network from an E1/T1 TDM network the Tellabs 8000 manager’s GUI-based tools. This is the primary
to an Ethernet-based packet network. and easiest way to configure the unit and the network.
2 data sheet — Tellabs® 8605 Access Switch

Specifications
Tellabs 8605 Access Switch variants Interfaces Management
n Tellabs 8605-A AC n 16 x chE1/chT1 n CLI, FTP, SNMP, SSH2

n Tellabs 8605-A DC24 n 2 x unchannelized DS3 interface n Tellabs 8000 manager


n Tellabs 8605-A DC48 (Tellabs 8605-D switch: DS3 ports
n Tellabs
replace two chE1/chT1 ports) Safety and EMC
8605-B AC n EN60950-1:2001
n 2 x Ethernet 10/100BASE-TX
n Tellabs 8605-B DC24
n 2 n EN 300 386: 2005, FCC CFR 47 Part 15
n Tellabs
x Ethernet Combo (2 x 100/1000BASE-X
8605-B DC48 Class B
SFP or 2 x 10/100/1000BASE-TX)
n Tellabs 8605-D AC n RTTE
n External alarm interface Directive 1995/5/EC
n Tellabs 8605-D DC24 n Station clock input
n Tellabs 8605-D DC48 Environmental Conditions
n Storage: ETS 300 019-1-1:2003-04
Resiliency
Physical Dimensions n 1:1 RSVP-TE LSP protection
Class 1.1, Temperature: –5° C to +45° C /
n 446 mm/17.56 in (width) x 44.35 mm/ 23° F to 113° F
n Bidirectional
Forwarding Detection (BFD)
1.75 in (height) x 250 mm/9.84 in (depth) n Transportation: ETS 300 019-1-2:2003-04
based LSP protection
n Rack-mountable in 19 inch, 23 inch or Class 2.3, Temperature: – 40° C to
600 mm racks +70° C / –40° F to +158° F
Synchronization
n ITU-T G.813 option 1 n Operating: ETS 300 019-1-3:2003-04
Input Voltage n External
Class 3.2 (non-condensing), Temperature:
synchronization input
n -48 VDC (input can be protected) –40° C to +65° C / –40° F to +149° F,
n Synchronous Ethernet (ITU-T G.8262)
n +24 VDC (input can be protected) Relative humidity: 5% to 95% (AC variant
n Adaptive synchronization over V1.0 temperature range of – 5° C to
n 100-240 VAC
packet network +45° C / 23° F to 113° F)
n IEEE 1588v2 Precision Time Protocol* n Minimum cold bootup temperature –20° C
Cooling
n Passive cooling
Routing and signaling protocols
n OSPF-TE, ISIS-TE
*For future release
Functionality
n ATM, Ethernet, HDLC, SAToP and n LDP, RSVP-TE
CESoPSN pseudowires
n ATM VC switching, ATM IMA and Traffic Management
n DiffServ support for 7 traffic classes
ATM cell concatenation
n ML-PPP n 4 queues per port
n VCCV n 802.1P/Q mapping to IP or MPLS
and BFD
n TDM n ATM service categories: CBR, rt-VBR,
cross-connection (DS0)
n IP
nrt-VBR, UBR+, UBR
routing
n ATM VC queuing/shaping
n MPLS switching
n Ethernet port policing and shaping
n PPPmux

n Up to 1Gbps switching capacity

North America Asia Pacific Europe, Middle East & Latin America & Statements herein may contain projections or other forward-looking statements
regarding future events, products, features, technology and resulting commercial
Africa Caribbean or technological benefits and advantages. These statements are for discussion
Tellabs Tellabs purposes only, are subject to change and are not to be construed as instructions,
One Tellabs Center 3 Anson Road Tellabs Tellabs product specifications, guarantees or warranties. Actual results may differ materially.
1415 West Diehl Road #14–01 Springleaf Tower Abbey Place 1401 N.W. 136th Avenue The following trademarks and service marks are owned by Tellabs Operations,
Naperville, IL 60563 Singapore 079909 24–28 Easton Street Suite 202 Inc., or its affiliates in the United States and/or other countries: TELLABS®,
U.S.A. Republic of Singapore High Wycombe, Bucks Sunrise, FL 33323 TELLABS and T symbol®, and T symbol®.

+1 630 798 8800 +65 6215 6411 HP11 1NT U.S.A. Any other company or product names may be trademarks of their respective companies.
Fax: +1 630 798 2000 Fax: +65 6215 6422 United Kingdom +1 954 839 2800 © 2009 Tellabs. All rights reserved.
+44 870 238 4700 Fax: +1 954 839 2828 74.1804E Rev. D 1/09
Fax: +44 870 238 4851

You might also like