Professional Documents
Culture Documents
Removal
NOTE: If equipped, the transmission servo heat shield must be unclipped from the fluid pan rail and
positioned out of the way for fluid pan removal. If equipped, loosen the nut and position the heat shield
out of the way.
Place a drain pan under the transmission fluid pan.
Clean and inspect the transmission fluid pan and magnet. Clean all mating surfaces.
Flush the transmission fluid cooler and transmission fluid cooler lines.
Installation
CAUTION: Lubricate fluid filter O-ring seals with clean automatic transmission fluid or they can be
damaged if; Lube and install new O-ring seals onto the transmission fluid filter. Install a new
transmission fluid filter.
Position the transmission fluid filter on the main control valve body.
If equipped, position the servo heat shield over the servos and clip it to the pan rail.
Lower the vehicle.
Apply the park brake, and start the engine.
NOTE: When filling a dry transmission and converter, start with a minimum of 3.7 liters (4 quarts) . Fill
transmission with clean automatic transmission fluid to the correct fluid level and check for correct
transmission operation.
Move the range selector lever through all the gears.
Recheck the transmission fluid level.
Pan Fluid Junta, e filtro
Remoção
NOTA: Se equipado, a transmissão escudo térmico servo deve ser unclipped do trilho
pan fluido e posicionado para fora do caminho para a remoção do fluido pan. Se
equipado, solte a porca ea posição do escudo de calor para fora do caminho.
Coloque uma panela de drenagem no prato de transmissão de fluido.
ATENÇÃO: Lubrifique fluido selos filtro de O-ring com fluido de transmissão automática
ou limpar eles podem ser danificados se; Lube e instalar novos selos-ring para o fluido
de transmissão do filtro. Instale um novo filtro de fluido da transmissão.
Posicione o fluido de transmissão do filtro no corpo principal da válvula de controle.