You are on page 1of 24

ISO 9001

ONV
igie ORIENTAL STRUCTURAL ENGINEERS PVT. LTD. REGISTERED
FIRM


Letter no: OSE/C/PSP/PU Dt:-20-02-2010

The Team Leader


Egis India Consulting engineers Private Limited
City Tower
Office no. — 301, 302, 303.
Kolte Patil Project
Dhole Patil Road
Pune — 411001
Kind attention: Col. A. K. Dasqupta (Rtd.)

Sub:- Four laning of Pune Solapur Project Section of NH — 9 (Km 93.7 to Km 144.4)
Re-submission of EMP.
Ref:- Your letter no:-4Bb/Egis/TUPSP/065 dt: 12-01-2010.

Sir,

With reference to above cited subject, please find attached herewith the Environment
Management Plan for Pune Solapur Project after incorporating all your observation.

This is for your kind perusal & approval please,

Thanking you and assuring of our best services all the times.

Yours Faithfully,
For Oriental Structural Engineers Pvt. LTd.

4(1' Ls 2 2 FEB 2010
K.L Srinivasan
Authorized representative

CC:- Mr. Prabhakar Rao, 01C, Package II, Egis-for information only.
Mr. Sanjay Kumar Singh, Environment Engineer-for information only. ULO

OTHERS

Site Office : PUNE-SOLAPUR HIGHWAY PROJECT, PLOT NO.530/531, VILLAGE DALAJ NO 2, TAL INDAPUR,
DIST.PUNE-413132 (MAHARASHTRA) PH.02118-241016 FAX: 241017 E-mail: psp@orientalindia.com
Registered Office : 21, COMMERCIAL COMPLEX, MALCHA MARG, DIPLOMATIC ENCLAVE, NEW DELHI-110021, INDIA
PHONES : 91-11-46044604, 26874470 FAX : 91-11-26114421
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 1 of 25
PLAN

CONTENTS

Introduction.
Environmental Management Plan of Construction Camp.
Borrow Area Management.
Construction Plants and Diesel Generator Sets.
Quarry Management Plan.
Environmental Management at Work Sites.
Solid Waste Management.
Environmental Monitoring.
09. Permission and Consents.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010

ffg PVT. LIMITED


ENVIRONMENTAL MANAGEMENT Page: 2 of 25
PLAN

1. INTRODUCTION:

The Environmental Management plan formed to protect the environment and to


implement, mitigate, monitor and provide remedial measures during the activities of road
construction work of Pune - Solapur road project Package II from Km. 93 + 700 to Km.
144 + 400 Sec. of NH- 9 in Maharastra.

Proper procedures and records shall be maintained for maintaining the requirements
related to protection of environment. Environmental training and awareness to all
employees in a regular basis shall be provided on the project.

Objectives

The main objectives are to:


Ensure compliance with regulatory requirements that are applicable to the
activities.
Provide timely indication if any environmental control measures fails to achieve
acceptable standard.
Access the environmental condition of the area where the road construction is
carried out.
Monitor effectiveness of environmental mitigation measures.
fft ORIENTAL STRUCTURAL ENGINEERS
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT
Date: 18.02.2010

Page: 3 of 25
PLAN

Purpose and scope

To be aware of the environmental concerns of the road construction work on NH-


9 and the application of environmental control during the construction phase of
the project.
To facilitate road construction programme while ensuring fulfillment of
environment commitment by minimizing and monitoring environmental upset,
which may be arise from construction activities.
To supervise compliance with environmental criteria reviewing the collected data.
Prepare Contingency plan.

Method for promoting environmental awareness

We will provide environmental awareness training to our employees.


All personnel being absorbed at site would be made to attend an environmental
awareness programme. Environmental Awareness Programme include environmental
policy, on site emergencies, Environmental aspects, Environmental impacts, rules and
regulation.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 4 of 25
PLAN

2. ENVIRONMENTAL MANAGEMENT OF CONSTRUCTION CAMP

Construction camp is the location in which the contractor will have camp office,
residential colony, workshop, Laboratory, casting yard, steel yard, Plants and
Machineries for the proposed Road work of NH- 9.

There are two constructions camp one near the Dalaj 2 Plot No. 530 at Ch. 110 and
another near the Indapur.
The site will be free from cultivation and in non-agricultural land.
The construction camp will have:
Offices and Residences
Plants and Machineries
Workshop
Laboratory Vehicle Parking.
The layout of the construction camp is designed in such a way that there will be a
reasonable distance between the offices, residences and Plant area.
The land for the construction camp will be on leased basis and the mutually agreed
amount will be paid to the landowners as per the terms and condition applied and will
be properly documented.
The layout plan prepared for the construction camp will be submitted for approval to
the local approving authority. On receiving the approval from the local body the
construction site will be mobilized.
The site clearance will be the first step and the trees if any existing in the site will be
taken care and will be left as it is and in case any removal is to be done will be
compensated by planting the additional trees at the boundary or at the selected
location in the camp site. Gardening will be done at residential and at site office.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 5 of 25
PLAN

Topsoil if any will be removed only in the construction area and will be utilized in the
lawn development in the campsite.
Fencing all around the campsite will be done with check post provision in the
entrance there by restricting the camp area as restricted area for the local public.
The barbed fencing

Source of water supply:


Water required in the construction campsite will be of the following
Domestic use in office and residential colony
For watering plants in Crushers, Wet Mix Plant, Hot Mix Plant and Batching Plant.
Green belt developing and gardening in and around office area and Residential area.

Domestic Use:
For the domestic usage of water in the office and residential colony the bore well will be
driven and the water will be tested for its quality. Upon receiving the good quality of bore
water the same will be utilized for the above proposed purpose by providing over head
tanks for water storage and necessary pipe lines for delivery.

Drinking water will be tested seasonally by assuring that there are no physical, chemical
and biological contaminants.

If required suitable treatment will be done for bore water if the raw water is not potable
upon receiving the water test report.

Plant Area:
Water is required for the dust suppression system in Crushers, processing Wet Mix Plant
and Batching Plant.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 6 of 25
PLAN

Water in the existing open well if any will be utilized for this that too upon conducting
water quality test.

Green Belt Development And Gardening:


Open well water will be utilized for developing the gardening.

Sanitation and Waste Water Treatment:


Offices and Residential colony will be constructed with sufficient ventilation and
required numbers of toilets, bathrooms and washbasins. Non Hazardous waste will be
collected in collection bins at various locations depending upon the requirements and will
be safely disposed. The residential and office blocks will be situated at reasonable
distance from Plants and Machineries.

Septic tank of adequate capacity will be provided separately for office and residential
colony. Raw sewage will be treated in these tanks. The treated sewage from this septic
tank will flow into soak pits there by underground strata disposal practice. The soak pits
and septic tanks will be away from the bore well so that no contamination will cause to
sources of water.

Wastewater from canteen will be collected and treated separately. Treated wastewater
and the bathroom waste will be collected in a sump and will be use for green belt
development and gardening.

Since Laboratory proposed in camp site is for material testing the waste water will be of
only container washings which will have only little bit of non hazardous solids. This will
be settled in the grit chamber provided and the clear water will be absorbed to the waste
water sump. There will no Chemical effluent generation from Laboratory.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 7 of 25
PLAN

Medicare and Sickbay:


A Medical center and sickbay will be established within the base camp with necessary
first aid facilities to treat minor injuries and to provide first aid. Urgent and serious cases
will be referred to the nearest hospital for treatment. Responsible persons will be trained
in the first aid treatment. The first aid boxes will be located in work areas. A separate
vehicle will be made available at any time for Emergency cases. The contact phone no. of
the nearest ambulance service will be displayed within the camp area for easy
accessibility.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 8 of 25
PLAN

3. BORROW AREA MANAGEMENT:


Borrow Area Identification and Methodology of operation:
The location where the soil for embankment and constituents for GSB can be obtained is
called borrow area. The widening of the existing road involves both cutting and filling of
earth. Hence the amount of material generated as a result of excavation is enough for use
in filling areas provided the cut material is found suitable.

A layout showing the borrow area with respect to the project area will be prepared.

The borrow area will be identified and will be taken on lease. It may be any government
land or of landowner. The following points will be taken in to consideration while
selecting the borrow area.
Whether the land is high or flat
Distance from the main road
Existing stream or water source.

High lands are highly suitable for the borrow area. On cutting the land will be brought to
the adjacent ground level. If the land is flat the soil can be excavated up to a maximum
depth of 1.5m below ground level. The slopes will be trimmed and no vertical cuts will
be left in the borrow area in order to avoid landslides and soil erosion. In all cases the
limits of borrow areas will be clearly demarcated. The dry lands alone will be used as
borrow area. The material from the trial pit of the borrow area will be tested and its
suitability with necessary approvals will be obtained.

The Excavators, JCB, Wheel loaders and tippers are the main machineries used in the
borrow areas. All this machineries will be maintained adequately fitted with silencers to
reduce noise levels. The machineries will checked for emission and will be kept within
the limits. Periodical checkups and maintenance will be done. The topsoil will be
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 9 of 25
PLAN

removed and stocked for reuse before the material excavation. Borrow areas are located
far away to the residential areas.
Location of Borrow Area:
A layout showing borrow areas with respect to the project area will be prepared. Also a
detailed borrow areas management and rehabilitation (if required) plan will be prepared.

SR.NO. LOCATION OF BORROW AREA CHAINAGE NO. REMARKS

1
2
3
4
5
6
7
8
D 9
10
11
12
13
14
15
16
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 10 of 25
PLAN

Haul Road Management:


The approach road to the borrow area will be maintained through out the period of its
use. Periodic sprinkling of water will be carried out to suppress dust generated during
vehicular movement. Speed limit will be strictly adhered to while hauling of material is
carried out. Necessary signboards will be displayed wherever required and the traffic
assistants will be posted to regulate the traffic flow.
A friendly atmosphere will be created with the local community and all assistance will
be provided.
Top Soil Management:
Before the commencement of the excavation the topsoil will be stripped and stockpiled
for the future use. This soil will be spread after the completion period incase of high level
borrow areas. The topsoil from the other borrow areas will be utilized in the turfing of
side slopes.
Closure Plan:
The activities carried out in this regard will be as per the direction of the landowner. If it
is desired by the owner that high land be flattened for construction purpose then the land
will be leveled once the extraction of material is complete.
The closure procedure agreed upon will be documented and included in the agreement
before borrow area is exploited.
A record of trees cut will be maintained and it will be ensured that suitable compensatory
measures will are taken.
A sketch of borrow area, distance from the project road, the area involved and expected
yield and all other relevant details will be attached with every borrow area that is
exploited.
Photographic Records:
Photographs of the area depicting the state of land before and after extraction of material
will be maintained.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 11 of 25
PLAN

4. CONSTRUCTION PLANTS AND DIESEL GENERATOR SETS:


Location of Road Construction sites
The project consists of 4 laning of the existing 2-lane section from chainage 93 +700 to
chainage 144 + 400 section road on NH-9. Crusher units, Wet Mix Macadam plant, Hot
Mix Macadam plant, Batching plant and residential colony for staff and labors and office
Administration is located in a camp based area near to Dalaj II , 110 kms. away from
Pune main town. Plants and equipments are the potential sources of pollutants, so it is
important to be concerned of the locations and role of the plant equipped. The four Plants
to be located in the Plant area are:
Stone Crushers
Wet Mix Macadam Plant
Hot Mix Macadam Plant and
Batching Plant.

Pollution Control in Stone Crusher:


There is no process waste from the stone-crushing unit. Hence there will be no water
pollution. The dust generated while crushing operation, conveying and at dropping point
will be suppressed by water sprinkling system provided on plant, and will be done at
point starting from the jaw crusher to the dropping point. Due to water sprinkling, weight
of dust particles get increased and will not fly in air. Water required for sprinkling
purpose will be drawn from the nearby open well to the overhead water tank for
continuous operation. Also green belt of minimum 5m will be developed around the plant
area which will acts as the dust filter for the surrounding area.

Pollution Control in Wet Mix Macadam Plant:


The total operation in the Wet Mix Macadam Plant is wet operation so there will not be
any air pollution. This operation will not generate any process wastewater also.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 12 of 25
PLAN

Pollution Control in Hot Mix Macadam Plant:


This operation has no process wastewater. Due to application of high flame at high speed
the dust particles in aggregates may come out in air vent. This is controlled by providing
dust collector and bag filter. The dust collector reduces the velocity and makes the
heavier particles to get settled down and this outlet air is passed through bag filter. For
periodic replacement of the bag filters maintenance schedule will be drafted in
consultation with the Engineer in-charge and schedule will be displayed.

Pollution Control in Batching Plant:


In Batching plants the cement will be stored in silos and will be conveyed in pipes using
screw pumps. Hence there is no possibility of spreading in air. Water sprinkling
arrangement will be provided at the conveyance and the drop point there by suppressing
the dust spreading. The wastewater generated while mixing drum cleaning and the
concrete transit containers will be allowed to pass in the settling tank and filtered in the
sand bed.
Waste Generation From Construction Plants:
The process waste generated in the construction plant is Stone dust. This dust is utilized
in Wet Mix Macadam Plant and if in excess it may be utilized for landfill. This will be
mechanically handled for collection and conveyance.

Pollution Control In DG Sets:


The following DG sets will be provided in the camp site:
600 KVA — 2 Nos.
500 KVA — 4 Nos.
285 KVA — 1Nos.
200 KVA — lNos.
125 KVA — 2Nos.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 13 of 25
PLAN

70 KVA — 1Nos.
55 KVA — ]Nos.
40 KVA — 6Nos.
Ambient Air Monitorini'
We shall undertake environmental monitoring in term of Ambient Air Monitoring for the
determination of suspended particulate matter. The air quality monitoring procedure shall
be establish to monitor the impact on air quality and measures to control air pollution
including dust suppression of activities that will cause degradation in air quality,
environmental procedures to manage pollutants, monitoring programme, record keeping
and reporting.

The main pollutants, which will come out from different road construction activities,
would be Suspended Particulate Matter (SPM), Noise pollution from different earth
moving equipments and generator sets.

The ambient air quality will be monitored once in a month and the level of pollutants in
the air will be checked. The emission from the genset and the Hot Mix Plant will also be
monitored once in a month and level will be checked and improvements if any required
will be done. All the vehicles used in the project will be tested for emission and the HR
and CPE departments will maintain the certificate of fitness.

Third party will do all the emission testing and the copies of the results will be
maintained in the HR Dept. The schedule of maintenance of plants, equipments and
machineries will be drafted in consultation with the technical person in charge and the
schedule will be adhered. The CPE Dept. will do periodical review of the maintenance
works completed, once in three month. If any deviation observed, root cause will be
identified and the required remedial measures will be taken.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 14 of 25
PLAN

Mitigation Measures
Transport of material from one place to another creates air pollution, which degrades the
atmosphere of the area. To minimize pollution precaution are taken to minimize visible
particulate matter from being deposited upon roadways. It includes removal of particulate
matter from equipment and cleaning of dust / mud and deposit of material on public place
by routine sweeping work everyday.
Control requirement at road construction site:
The dumping material shall be place in a manner that will minimize dust production.
Material shall be stabilized by watering or other accepted dust suppression techniques.
The height from which material dropped shall be the minimum practical height to limit
the fugitive dust emission. Stock piled, sand and aggregates use in concrete
manufacturing and construction work should be piled with suitable slopes and if required
it will be enclosed on three sides with suitable barricading. Cement will be stored
separately in cement godown. Provide water sprinklers that are required to control and
suppress dust during handling of excavation, debris and or during demolition. During dry
weather, dust control methods must be use daily especially on windy, dry days to prevent
any dust from blowing.
Monitoring of SPM:
The impacts of fugitive dust as ambient air pollution depends on quantity generated as
well as drift potential of dust particles injected into atmosphere. Larger particles will
settle down but smaller particles will drift away. SPM levels will be monitored to check
dust impact during construction phase.
Methodology:
The samples will be collected with the help of High Volume Dust Sampler using standard
methods on pre weighted GFA filter paper at a rate of 1:1 m3/minute for 24 hours and
SPM will be monitored by suitable placement of High Volume Sampler at various
required locations at the site. Air monitoring shall be carried out monthly at each
location.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 15 of 25
PLAN

Presentation and Interpretation of results:


The results will be reported on the basis of 24 hours and will be presented as ug/m3.
These results will be compared with National Ambient Air Quality standards. The results
will be recorded and mitigation measures will be taken for control of air pollution.

National Ambient Air Quality Standards

CONCENTRATION IN AMBIENT AIR


TIME
POLLUTANTS WEIGHTED RESIDENTIAL,
SENSITIVE INDUSTRIAL
AVERAGE RURAL AND
AREA AREA
OTHER AREAS
Annual
Sulphur Dioxide 15 ug/m3 — 8Oug/m3 - 6Oug/m3 -
average 24
(S02) 3Oug/ m3 15Oug/m3 8Oug/m3
hours
Oxides of Annual
15 ug/m3 - 80 ug/m3 60 ug/m3
Nitrogen as average 24
3Oug/m3 120 ug/m3 80 ug/m3
(NO2) hours
Suspended Annual
70 ug/m3 360 ug/m3 140 ug/m3
particulate average 24
100 ug/m3 500 ug/m3 200 ug/m3
matter (SPM) hours
fir ORIENTAL STRUCTURAL ENGINEERS
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT
PLAN
Date: 18.02.2010

Page: 16 of 25

Noise Monitorink And Control Plan

The noise monitoring and control plan shall contain the sources of noise pollution at the
construction site. It also contains the mitigation measures to be taken.
Noise Control

Required measures will be taken so as to minimize noise impact on the community.


Provision of necessary silencers and mufflers on construction equipments, which will
properly fitted and maintained. Canopy type generator sets will be provided at required
locations and open type generators will be in housed in sheds.

Sources Of Noise Pollution:

Noise generated during operating of the different Earth Moving Equipments.


Noise generated during any other construction activity.
Noise generated during truck, tipper loading, unloading and handling activities.
Noise generated from Batching Plant, Crusher unit, Hot Mix Plant and Wet mix
Macadam plant.
Noise generated from Drilling and blasting activities.

Allowable Noise Emission Levels

LAND USED MAXIMUM NOISE LEVEL — Lmax dB (A)

Residential Day time — 75 and Night time - 65

Commercial 85 (At all times)

Industrial 90 (At all times)


ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 17 of 25
PLAN

Mitikation Measures

To the extent required meeting the noise limits adequate efforts will be taken to reduce
the construction noise emissions level.

Scheduling the Tipper, Truck and Earth Moving Equipments for loading,
unloading and hauling operations so as to minimize noise impact on surrounding.
Locating stationery equipments as to minimize noise impact on the community.
Put off Plants and Equipments when not in use or idle.
Use only well maintained plants and Equipments, which should be serviced
regularly. Maintain equipments such that parts of vehicles and load are secure
against vibration and rattling.
Silencers and mufflers on construction equipment shall be properly fitted and
maintained.
Maximize physical isolation between noise generators and noise receptors.
Grading of surfaced irregularities on construction sites to prevent the generation
of impact noise and ground vibration by passing vehicles.
Schedule work to avoid simultaneous activities that both generate high noise
level.
Construction of temporary physical barriers.

Monitoring
Noise level will be measured at various locations with calibrated Noise meter at different
times during the operation of equipments used for construction of the project. Noise
monitoring and control plan, results submitted will include duration of measurement
distance of monitoring from activity and construction equipment working during
monitoring period.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 18 of 25
PLAN

Presentation and Interpretation


Noise level during the construction activities will be measured and presented as Leq,
L10, L90 and Lmax in decibel (dB) units. The measured value will be compared with the
standards values.

Contingency Plan
If the noise level exceeds of limiting value (either accidentally or through inadequate
implementation of mitigation measures) does occur, the cause will be quickly identified
and remedial measures will be taken with professional expertise.

Water Pollution Control:


We will provide a drainage system to drain off all surface water from the work site into
suitable drain outlet. We will collect all cement slurry, Bentonite slurry or other grouts
used in road construction and disposed off safely at the nearest landfill site, which will be
provided by the authority.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010

gap PVT. LIMITED


ENVIRONMENTAL MANAGEMENT Page: 19 of 25
PLAN

Oil Spills Prevention Control Plan, Storage and Handling of Inflammable Materials:

Various types of oils at construction site, like Diesel, Petrol, Engine oil, Grease,
Hydraulic oil, Transmission oil, etc; is used as fuel and for Hydraulic operations and for
Transformers. Oil, Grease and similar material will be stored on a paved surface. Diesel
as a fuel for all Earth Moving Equipments and other vehicles will be transported in a
separate vehicle with tank of suitable capacity. All other oily material will be transported
in a suitable container. To avoid oil spill drips pans will be provided during handling of
oil / diesel, etc. Even minor leaks from mobile equipments and generator will be
effectively arrested. Fixed generator sets will be provided with trays below them.

Inflammable material like LPG cylinders and DA cylinders were used at site for gas
cutting jobs. We are storing at our store yard in a specially designated area. We are
keeping a bare numbers of cylinders as per our work requirement. We will strictly adhere
to statutory Gas Cylinders Rules while storing and handling these cylinders at our site.

Event Contingency Plan:

We shall provide adequate number of fire extinguishers and fire buckets at site to
control the fire due to inflammable materials.
We shall contact to nearest fire station and police station immediately to handle
such situation.
We shall call to nearest hospital if any emergency occurs.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 20 of 25
PLAN

Site HVRiene:
Site hygiene will be maintained at highest standards to keep the good healthy working
environment at our work site. Proper longitudinal and C/S profile should be maintained
so as to drain off storm water as well as waste discharge during the course of construction
activities. A septic tank for our sewage system is already constructed.

HAZARDOUS CHEMICALS & WASTES: HANDLING, STORAGE AND DISPOSAL

All hazards material must be stored in approved containers/cabinets and storage area.
Containers cabinets and storage area will have proper Labelling. Material must not be
transferred to unapproved unlabeled containers. Safe procedures will be used for
transferring material from bulk.
All the hazardous chemicals must be labeled properly.
All storage facility must be equipped with eyewash and splash goggles.
Temporary and permanent storage of all hazardous material must be neat and
orderly. Stored must not obstruct fire extinguishers where electrical panels exists.
All storage must ensure that incompatible chemicals do not come in contact with
one another.
5. Hazardous Chemicals flat away from the sun dump. Surface must be clear and
dry.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 21 of 25
PLAN

HANDLING
Hazardous material handled with proper care under responsible person.
Use proper PPE in manual handling of hazardous chemical.
An approved device carrying hazardous material will be used whenever chemicals
are taken from stock area.
Hands get contaminated while handling hazardous chemicals and should be
washed and cleaned.
In handling flammable substances all type of ignition sources are avoided.

Supervisor will ensure that the staff who works with such hazard product will be trained
in the use, storage and handling of controlled product. The training programme must
include instruction of the following:

Type of labels
MSDS Sheet
Procedure for safe use, storage and handling.
Emergency procedures.

DISPOSAL
Empty containers of hazardous chemicals may itself a hazard waste. Empty containers
and hazardous waste will be given to authorized dealer.

In encountered or generated as a result of our activities, then waste classified as


hazardous under "Hazardous wastes (Management and Handling) rules 1989' and
chemicals classified as hazardous chemicals under "manufacturer, storage and import of
Hazardous Chemicals 1989 of EP A (1986) shall be deposited off in a manner in
compliance with procedure given in the rules under the aforesaid acts.
All personnel being absorbed at site would be made to attend environmental awareness
programme.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 22 of 25
PLAN

5. QUARRY MANAGEMENT PLAN:

Location of Quarry Areas


There is two quarries for the project work. One quarry is situated 2 km. away from camp
at Dalaj II near Maruti crusher. Another Crusher is situated near ch. 132 at Tarangwadi.

Status of Statutory Permits


All the Statutory permits are obtained (Xerox copy enclosed for reference)

Quarry Operation:

Type of blasting:
Mining / blasting operation will be carried out in a safe and secured manner. Controlled
blasting will be done. It will be ensured that least disturbance is caused while carrying out
such operations. All the applicable laws, rules and regulations pertaining to the use of
explosives will be strictly adhered. The supply of explosives required for blasting will be
done by licensed agencies on day-to-day basis. Hence a stock of explosives will be stored
within the site.

Time of Blasting:

Blasting operation will be carried out during fixed hours of the day. The villagers and the
other people within the vicinity will know the period in which the blasting will be carried
out. Only the site in charge will prepare all charges.
ORIENTAL STRUCTURAL ENGINEERS Date: 18.02.2010
PVT. LIMITED
ENVIRONMENTAL MANAGEMENT Page: 23 of 25
PLAN

Precautions to Be Taken During Blasting:

Red flags will be displayed prominently in all directions during blasting operations. The
flags will be placed 200mts. from the blasting area. Unauthorized persons except those
who actually involve in drilling and blasting will be strictly restricted from entering this
area. No person will be allowed to enter in the flagged area at least 10 minutes before
firing and warning siren will be sounded. Blasting will be as light as possible, consistence
with through barricade of the material necessary for economical loading and hauling. No
blasting leading to overshooting will be practiced. All the blasting operations will be
carried out in safe and orderly manner. Vertical cuts will be avoided and benches will be
created in a manner that slides do not occur.

Storage of explosives and operational procedures:

No storage of explosives within the campsite will be done. The contract for supply of
explosives will be given to authorized agencies on day-to-day basis whenever required.
Properly trained persons will handle the explosive with required PPE's.

Precautions to Be Taken During Drilling:

Mark distinctly every deep hole so as to be readily seen.


No person shall be permitted to remain within a radius of 20mts. On the same
bench were charging of holes with explosives is being carried out.

You might also like