Professional Documents
Culture Documents
com, LLC
Research Office: 1234 Rock Hill Road • Pasadena, MD 21122
Consumerl..ab.c:om Phone 410-437-9134· Fax 410-437-9184
e-mail: research@consumerlab.com
Be Sure It's CL Approved Website: www.consumerlab.com
Products Tested:
1. Biotivia ™ Bioforte ™ Bio Enhanced Trans-Resveratrol 250 mg
2. Biotivia" Transmax" Bio Enhanced Trans-Resveratrol 500 mg
I. Disintegration N/A
I. Disintegration N/A
Testing Methods:
Resveratrolproducts were tested for their total trans and cis resveratrol content. All products were first
analyzed in a independent laboratory using a HPLC (High Performance Liquid Chromatography) assay.
Products not passing this initial assay were tested in a second independent laboratory utilizing a similar
HPLC assay.
Analyses for lead and cadmium were performed using an ICP-MS (inductively Coupled Plasma-Mass
Spectroscopy)
Disintegration of non-chewable, non-capsule, non-enteric coated and non-time-release formulations was
analyzed utilizing USP (United States Pharmacopeia) <2040> recommendations entitled "Disintegration and
Dissolution of Nutritional Supplements."
Any product that did not pass the testing was sent to another independent laboratory to repeat testing for at
least one of the criteria on which it did not pass. The identities of the products were not disclosed to the
laboratories performing the testing.
Passing Score:
To pass, a product must:
1. Must meet 100% of resveratrol label claims for the total amount resveratrol and specific
resveratrol forms. Total Resveratrol =
sum of (total free trans/cis resveratrol) + (total trans/cis
polydatin x 0.587) (note: polydatin glycoside is composed of 58.7% resveratrol)
2. Meet recommended USP parameters for disintegration for dietary supplements (excluding
capsule, enteric coated, chewable and time-release products).
4. Contain less than 0.3 parts per million (or micrograms per gram) of cadmium for dried raw herb
(World Health Organization, Quality Control Methods for Medicinal Plant Material, proposed
guidelines, 1998) or less than 0.1 parts per million for extracts. The lower concentration standard
for extracts reflects the ability to remove heavy metals such as cadmium during the extraction
process.