Professional Documents
Culture Documents
M-Series
M-Series (Mcdata) switches uses both web and CLI, the table below displays some but not all the CLI
commands.
There are several commands that allow you to navigate through the switch "..", "ctrl-U" and "root" .
Zoning limits
B-Series
B-Series (Brocade) switches uses both web and CLI, the table below displays some but not all the CLI
commands.
MDS-Series
B-Series (Cisco) switches uses both web and CLI, the table below displays some but not all the CLI commands,
the ones highlighted will be the ones used most often.
There are several commands that allow you to navigate through the switch "cd", "copy", "dir", "find", "mkdir",
"move", "rmdir" and "tail".
create a zone and place it in the vsan # zone name testzone1 vsan 4
add a member (port wwn example) # member pwwn 10:00:00:00:c9:21:40:b8 (port on the host)
add a member (fabric port wwn example) # member fwwn 10:01:10:01:10:ab:cd:ef (port on the switch)
add a member (FCID example - hard zoning) # member fcid 0x7f0000 (24 bit address)
add a member (FC alias example) # member fcalias payroll