Professional Documents
Culture Documents
2. Physical Description
The MP-11x front panel provides operating status LEDs, as shown below:
Notice
This Fast Track Guide describes the quick setup for AudioCodes MediaPack MP-11x
series Voice-over-IP (VoIP) MGCP media gateways.
Channel Status Uplink Power
Information contained in this document is believed to be accurate and reliable at the time On: Off-Hook On: Ethernet Up On: Power On
of printing. However, due to ongoing product improvements and revisions, AudioCodes Slow Flash: Ringing Off: No Link Off: No Power
cannot guarantee accuracy of printed material after the Date Published nor can it accept Fast Flash: Malfunction Fail Ready
Off: On-Hook On: Failure/Initialization On: Operational
responsibility for errors or omissions.
Off: Normal Off: Loading SW / Failure
Updates to this document and other documents as well as software updates for the
MP-11x gateway can be viewed by registered customers on the AudioCodes The MP-11x rear panel provides ports, as shown below:
Web site at www.audiocodes.com/downloads.
© Copyright 2009 AudioCodes Ltd. All rights reserved.
This document is subject to change without notice.
Date Published: May-19-2009
AC Power Socket RJ-11 FXO Ports
Reset Button
Document #: LTRT-53503 RJ-45 10/100BaseTX
RJ-11 FXS Ports
Ethernet Port
RS-232 6-Pin Mini-DIN Female (PS/2) Port
AudioCodes CPE & Access Gateway Products AudioCodes CPE & Access Gateway Products
4. Assigning an IP Address
Your MP-11x is shipped with the following default IP address settings:
9 FXS-only and combined FXS/FXO devices: 10.1.10.10
9 FXO-only devices: 10.1.10.11
9 Subnet: 255.255.0.0
9 Default Gateway: 0.0.0.0