Professional Documents
Culture Documents
Material This property data is a summary of similar materials in the MatWeb database for the category "1000 Series Aluminum". Each property range of values reported
Notes: is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the
average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or
processing methods.
Vendors: Click here to view all available suppliers for this material.
Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties Metric English Comments
Density 2.70 - 2.71 g/cc 0.0975 - 0.0979 lb/in³ Average value: 2.70 g/cc Grade Count:63
Mechanical Properties Metric English Comments
Hardness, Brinell 12.0 - 55.0 12.0 - 55.0 Average value: 32.1 Grade Count:29
Tensile Strength, Ultimate 45.0 - 205 MPa 6530 - 29700 psi Average value: 116 MPa Grade Count:29
Tensile Strength, Yield 10.0 - 165 MPa 1450 - 24000 psi Average value: 94.4 MPa Grade Count:29
Elongation at Break 1.50 - 50.0 % 1.50 - 50.0 % Average value: 16.4 % Grade Count:26
Modulus of Elasticity 62.0 - 69.0 GPa 8990 - 10000 ksi Average value: 68.4 GPa Grade Count:29
Notched Tensile Strength 90.0 - 207 MPa 13100 - 30000 psi Average value: 145 MPa Grade Count:3
Ultimate Bearing Strength 117 - 241 MPa 17000 - 35000 psi Average value: 179 MPa Grade Count:4
Bearing Yield Strength 41.0 - 207 MPa 5950 - 30000 psi Average value: 116 MPa Grade Count:4
Poissons Ratio 0.330 0.330 Average value: 0.330 Grade Count:29
Fatigue Strength 20.7 - 62.1 MPa 3000 - 9000 psi Average value: 42.6 MPa Grade Count:11
Machinability 10.0 - 30.0 % 10.0 - 30.0 % Average value: 20.0 % Grade Count:8
Shear Modulus 25.0 - 26.0 GPa 3630 - 3770 ksi Average value: 25.9 GPa Grade Count:29
Shear Strength 34.0 - 125 MPa 4930 - 18100 psi Average value: 73.4 MPa Grade Count:29
Electrical Properties Metric English Comments
Electrical Resistivity 0.00000270 - 0.00000300 ohm-cm 0.00000270 - 0.00000300 ohm-cm Average value: 0.00000287 ohm-cm Grade Count:29
Thermal Properties Metric English Comments
Heat of Fusion 390 J/g 168 BTU/lb Average value: 390 J/g Grade Count:28
CTE, linear 23.6 - 25.5 µm/m-°C 13.1 - 14.2 µin/in-°F Average value: 24.9 µm/m-°C Grade Count:29
Specific Heat Capacity 0.900 - 0.904 J/g-°C 0.215 - 0.216 BTU/lb-°F Average value: 0.901 J/g-°C Grade Count:29
Thermal Conductivity 218 - 243 W/m-K 1510 - 1690 BTU-in/hr-ft²-°F Average value: 229 W/m-K Grade Count:29
Melting Point 643 - 660 °C 1190 - 1220 °F Average value: 652 °C Grade Count:29
Solidus 643 - 660 °C 1190 - 1220 °F Average value: 647 °C Grade Count:29
Liquidus 655 - 660 °C 1210 - 1220 °F Average value: 657 °C Grade Count:29
Optical Properties Metric English Comments
Emissivity (0-1) 0.0400 - 0.0500 0.0400 - 0.0500 Average value: 0.0467 Grade Count:9
Reflection Coefficient, Visible (0- 0.860 - 0.960 0.860 - 0.960 Average value: 0.889 Grade Count:11
1)
Processing Properties Metric English Comments
Annealing Temperature 343 °C 650 °F Average value: 343 °C Grade Count:20
Component Elements Metric English Comments
Properties
Aluminum, Al 99.0 - 100 % 99.0 - 100 % Average value: 99.5 % Grade Count:64
Beryllium, Be 0.000800 % 0.000800 % Average value: 0.000800 % Grade Count:8
Boron, B 0.0100 - 0.0500 % 0.0100 - 0.0500 % Average value: 0.0370 % Grade Count:10
Chromium, Cr 0.0100 - 0.100 % 0.0100 - 0.100 % Average value: 0.0182 % Grade Count:11
Copper, Cu 0.00300 - 0.350 % 0.00300 - 0.350 % Average value: 0.0538 % Grade Count:63
Gallium, Ga 0.00500 - 0.0300 % 0.00500 - 0.0300 % Average value: 0.0263 % Grade Count:23
Iron, Fe 0.00600 - 0.800 % 0.00600 - 0.800 % Average value: 0.280 % Grade Count:44
Magnesium, Mg 0.00600 - 0.300 % 0.00600 - 0.300 % Average value: 0.0471 % Grade Count:47
Manganese, Mn 0.00200 - 0.300 % 0.00200 - 0.300 % Average value: 0.0357 % Grade Count:60
Other, each 0.00200 - 0.0500 % 0.00200 - 0.0500 % Average value: 0.0273 % Grade Count:59
Other, total 0.0500 - 0.150 % 0.0500 - 0.150 % Average value: 0.122 % Grade Count:16
Si+Fe 0.0200 - 1.00 % 0.0200 - 1.00 % Average value: 0.650 % Grade Count:20
Silicon, Si 0.00600 - 0.350 % 0.00600 - 0.350 % Average value: 0.161 % Grade Count:44
Titanium, Ti 0.00200 - 0.200 % 0.00200 - 0.200 % Average value: 0.0296 % Grade Count:42
V+Ti 0.0100 - 0.0300 % 0.0100 - 0.0300 % Average value: 0.0210 % Grade Count:10
Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's disclaimer and terms of use regarding this information. Click here to view all the property values for this datasheet as they were
originally entered into MatWeb.