Professional Documents
Culture Documents
A
45°
B
22 Ga. Galvanized sheet
CL 6"
5" C 5"
3" Opening
4ft \ 5ft 4ft \ 5ft 4ft \ 5ft 4ft \ 5ft 11/16" dia.
Installation
1 - Drill holes in conveyor frame using the base plate for a template.
2 - Mount base plates to support band.
3 - Mount retaining bracket to support band.
4 - Bolt support bands on conveyor with retaining brackets on side where service will be made.
5 - Mount hoods to support bands by bolting eyebolts to base plates.
DACON™ hoods can be fabricated from various WINDPROOF ATTACHMENTS ELIMINATE the need for awkward bulky chains.
gauges of G-90 galvanized steel (22ga; 20ga; 18ga), aluminum While almost invisible, this ‘’V’’ shaped device sits on the middle of the support band and
(16ga; 3003 utility; 5052 marine duty), stainless (20ga; SS304; OTHER SYSTEMS prevents the hood sheet from blowing over while opening during windy conditions.
SS316) or carbon steel. SHEDS WATER
Our unique design is engineered to shed water giving you years
of rust free service.
CORRUGATED WIND GUARDS can be installed on either side of the conveyor structure to shield the return belt from
SIMAR-DACON SYSTEM high winds. Panels are made from 20ga G-90 galvanized steel and overlap forming a tight seal.
3/4 HOOD: same as the full hood, but with one side perma- 14 ga Gavanized Support.
• odd shapes hoods for convex & concave areas • holes in bands for pull cord eyebolts or sprinkler pipes
• extended down to cover return belt • side mounting base plate
STANDARD model INSTANT OPENING model • flexible canvas for hinged sections • holes for idler lubrification
Allows easy belt & idler maintenance; simply loosen the Originally developed for the pulp & paper industry, features
wing nuts on the opening side eyebolts, raise the hood and the quickest method of access to the conveyor belt & idlers.
lock into the retaining brackets for servicing. The opening side of the hood is held into place by two 90° Example of part # to order a standard hood:
rods roll formed into the end of the sheet, which can be
quickly rotated and slipped into or out of a receiving hole in
the support bands. DG36-C1-224a
D DACON™
G G = Galvanized, A = Aluminum, S = Stainless
36 Belt width (in inches)
C C = Complete (full) 180° cover, P = Partial, 3Q = 3/4 type
1 1 = Opening 1 side only, 2 = Opening from both sides, F = Fixed
22 Thickness of sheet material (gauge)
4 Hood centers (in feet)
a With optional windproof attachments
This unit would include 1 complete G-90 galvanized hood of 22ga for 36’’ belt at 4 ft c-c, opening 1 side only, 1 G-90 14ga
galvanized support band, 1 galvanized retaining bracket, 2 galvanized base plates, 1 optional windproof attachment,
4 pre-assembled zinc coated eyebolts & other required fasteners (base plate hold down bolts not included).