Professional Documents
Culture Documents
Into Windows
All about Windows & Technology
Type here your search
Home Windows 7 Vista Themes Freeware Privacy
Subscribe via RSS Subscribe via Email
Recommended: Click Here to Fix Windows Errors and Optimize Windows Performance
This guide works 100% for Vista & Windows 7 unlike most of the guides out there. I have seen
many sites/blogs that have “Install Vista from USB guide” but either with incomplete steps or not
working guide. I have also seen some guides that don’t’ use proper commands in this guide. After
spending many hours I have come up with this 100% working guide.
I just did this method on one of my friends machine and installed the new Windows 7 BETA. The
main advantage is that by using USB drive you will be able to install Windows 7/Vista in just 15
minutes. You can also use this bootable USB drive on friend’s computer who doesn’t have a DVD
optical drive.
The method is very simple and you can use without any hassles. Needless to say that your
motherboard should support USB Boot feature to make use of the bootable USB drive.
Requirements:
Follow the below steps to create bootable Windows 7/Vista USB drive using which you can install
Windows 7/Vista easily.
1. Plug-in your USB flash drive to USB port and move all the contents from USB drive to a safe
location on your system.
2. Open Command Prompt with admin rights. Use any of the below methods to open Command
Prompt with admin rights.
*Type cmd in Start menu search box and hit Ctrl+ Shift+ Enter.
Or
*Go to Start menu > All programs > Accessories, right click on Command Prompt and select Run
as administrator.
3. You need to know about the USB drive a little bit. Type in the following commands in the
command prompt:
First type DISKPART and hit enter to see the below message.
Next type LIST DISK command and note down the Disk number (ex: Disk 1) of your USB flash
drive. In the below screenshot my Flash Drive Disk no is Disk 1.
4. Next type all the below commands one by one. Here I assume that your disk drive no is “Disk
1”.If you have Disk 2 as your USB flash drive then use Disk 2.Refer the above step to confirm it.
So below are the commands you need to type and execute one by one:
SELECT DISK 1
CLEAN
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just
minimize it.
5. Next insert your Windows7/Vista DVD into the optical drive and check the drive letter of the
DVD drive. In this guide I will assume that your DVD drive letter is “D” and USB drive letter is
“H” (open my computer to know about it).
6. Maximize the minimized Command Prompt in the 4th step.Type the following command now:
7. Type another command given below to update the USB drive with BOOTMGR compatible
code.
BOOTSECT.EXE /NT60 H:
Where “H” is your USB drive letter. Once you enter the above command you will see the below
message.
8. Copy your Windows 7/Vista DVD contents to the USB flash drive.
9. Your USB drive is ready to boot and install Windows 7/Vista. Only thing you need to change
the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just
the matter the changing the boot priority or enabling the USB boot option in the BIOS.
Note: If you are not able to boot after following this guide means you haven’t set the BIOS
priority to USB. If you got any problem in following this guide feel free to ask questions by
leaving comment.
Update: If you find this guide difficult to follow, please use the easy-to-use guide to create a
bootable USB to install Windows 7 using official tool.
3 digg
Tags: Bootable USB, Install Vista/Windows 7 from USB, Install Windows 7, Instlal Vista, USB
Related Posts
Useful Guides
599 Comments
1. Daryl
Posted January 12, 2009 at 1:20 am | Permalink
Hey thanks! I’d love to try this soon I hope it’s working
2. Brandon
Posted January 12, 2009 at 3:22 am | Permalink
I don’t think XP shows usb drives in list disk, or maybe it’s just me. Is there any other
alternative to step 4?
3. tweakwindows
Posted January 12, 2009 at 7:59 am | Permalink
4. tweakwindows
Posted January 12, 2009 at 8:01 am | Permalink
5. Casmir
Posted January 12, 2009 at 11:31 am | Permalink
This is cool…Hope it will work the same way with an external HDD….
Keep up the good work bro…
6. ben
Posted January 12, 2009 at 12:36 pm | Permalink
i am also trying to do this from xp, and it doesnt work, im not sure if step 4 needs to be done
in comand prompt (i formatted the stick in disk manager) but i got stuck on step 7 because
there is no such thing as bootsect.exe
7. neodorian
Posted January 12, 2009 at 1:23 pm | Permalink
When I run bootsect.exe it says that this version isn’t compatible with my version of
windows even though it is running the vista version.
8. tweakwindows
Posted January 12, 2009 at 1:32 pm | Permalink
Please use Vista or Windows 7 as bootsect.exe is not present in XP CD.This guide only
works on Windows Vista & 7
9. tweakwindows
Posted January 12, 2009 at 1:34 pm | Permalink
This guide doesn’t work for XP..Only for Vista and Windows 7..I have mentioned in the
title of the post.
10. tweakwindows
Posted January 12, 2009 at 1:35 pm | Permalink
@ben
Please follow the guide step-by-step and don’t skip any step.
11. Paul
Posted January 12, 2009 at 11:27 pm | Permalink
THANK YOU! I was having problems getting the boot sector to work…
and you fixed it. Definitely better than any other guide… SCREEN SHOTS = TEHWIN!,
they help sooo much when you can’t see what you’ve done wrong, even picked up a few
new cmd tricks.
I’m a fan, thanks man.
12. ?lhan
Posted January 12, 2009 at 11:41 pm | Permalink
Hey man your methods does not working in XP. Please reinform us.
13. Omar
Posted January 13, 2009 at 4:52 am | Permalink
I was doing fine up until step 5. I figured the whole point of booting from a USB drive was
to avoid having to burn a disc with the Windows 7 files on it, or install on a PC without a
DVD drive. Anyway, I don’t have any blank DVD’s, so I was trying to install it from my
USB drive, but I can’t get past step 5, since I don’t have my Windows 7 files on a disc.
They are on my hard drive, and my USB drive. Help!
14. John
Posted January 13, 2009 at 5:00 am | Permalink
15. Lincoln
Posted January 13, 2009 at 12:56 pm | Permalink
OK nevermind I just had to optimise the drive for performance… Sorry about that!
16. EiNS
Posted January 13, 2009 at 1:26 pm | Permalink
any working method for xp usb drive installation? Tried many…but non of them working
17. vikrant
Posted January 13, 2009 at 6:12 pm | Permalink
18. BlogPiG
Posted January 13, 2009 at 7:41 pm | Permalink
19. eden
Posted January 13, 2009 at 9:51 pm | Permalink
i just formated my usb pen, and done show all files on the DVD and copied the contents
over.
i didnt use the diskpart tools.
20. Laker_Fan32
Posted January 13, 2009 at 10:57 pm | Permalink
Leechie!!! THANK YOU SO MUCH FOR YOUR INSTRUCTIONS FOR XP!!!! Wow, I
have been searching for past two days and you explained it in 4 steps, you are AWESOME!
Thank you VERY VERY VERY MUCH!!!
21. Rkee
Posted January 14, 2009 at 1:52 pm | Permalink
U can also achieve booting from a usb drive by using daemon tools. Don’t mean to dis on
the author graet walkthrough by the way. Its just an alternative, and no need for any
command prompt scripting.
22. madmax
Posted January 14, 2009 at 4:05 pm | Permalink
i tried both the XP method and VISTA method. both i managed to do without any problems.
but when i try to boot from the pen drive i get this error
file : \Boot\BCD
status : 0xc000000e
info : An error occurred while attempting to read the boot configuration
23. Darin
Posted January 14, 2009 at 10:32 pm | Permalink
Hey, I followed all the steps, and everything worked perfectly until I booted from the Usb
device and tried to install windows 7. It said that “Setup does not support installation to
disks connected through a USB port. Is there a way around this?
24. tweakwindows
Posted January 15, 2009 at 5:12 am | Permalink
@Darin
Firstly, let me apologise for the experience you’re having.
The error means, your motherboard doesn’t support USB booting. I have also mentioned
this in my guide. And there is no way to boot USB unless your motherboard support.
@Vikrant
No this guide doesn’t for the users who like to install Windows 7 on USB.
@Omar
If you don’t have a DVD drive/USB(4GB) then use my guide “Installing Windows 7
without using USB/DVD drive”. There are two methods, direct and via VPC method. Please
follow my guides.
@All
I am glad that this guide helped you to install Windows 7.
Thanks.
25. Joey
Posted January 15, 2009 at 12:16 pm | Permalink
i downloaded windows 7 from microsoft and dont have a cd/dvd for it so what do i do do i
extract it to the usb then restart using the flash drive or what?
26. tweakwindows
Posted January 15, 2009 at 12:48 pm | Permalink
@Joey
If you don’t have a DVD/USB then use my below guide which shows “Installing Windows
7 without using USB/DVD drive”
http://www.intowindows.com/installing-windows-7-without-using-dvdusb-drive-method-2/
http://www.intowindows.com/installing-windows-7-without-using-dvdusb-drive-method-1/
27. gabontz
Posted January 15, 2009 at 3:09 pm | Permalink
28. pete
Posted January 15, 2009 at 5:13 pm | Permalink
When I try step 7, I get: “The system cannot execute the specified program”
29. suavi
Posted January 15, 2009 at 7:42 pm | Permalink
Bootsect.exe problem!
I think that there is a problem occurs when you want to install “64 Bit Windows 7″ from
your 32 Bit Vista.
30. Morty
Posted January 15, 2009 at 11:07 pm | Permalink
What if I want to create a x64 boot in a x86 environment? I get this error message. “This
version of g:\boot\bootsect.exe is not compatible with the version of Windows you’re
running. Check your system information yada yada contact software publisher.” I am
running Vista 32-bit, trying to create this USB boot thingaby for Windows 7 64-bit.
Thanks mate.
31. Nick
Posted January 19, 2009 at 4:27 am | Permalink
When I tried to boot from usb it will not even get finished copying the files when it gives
me an error code. It sometimes will start installing updates. But what is with this damn error
code. I,m waiting on it to do it again……..Expanding files (0%)……….
Windows cannot install required files. Make sure all files required for installation are
available, and restart the installation. Error code: 0x8007045D
32. Siddanth
Posted January 19, 2009 at 3:31 pm | Permalink
Hey tweakwindows i think we need to make use of xcopy command havent tried it for xp
did u try it out /?
33. Jonathan
Posted January 20, 2009 at 3:12 am | Permalink
34. Laker_Fan32
Posted January 21, 2009 at 6:23 pm | Permalink
My USB becomes Bootable, however when it is installing it gets stuck at 8% and then
nothing happens??? I’ve tried many times and it doesn’t seem to work, it always gets stuck
at 5% or 8%. Sometimes it errors out with the error code: 0x800703ee
35. PeterNLD
Posted January 22, 2009 at 4:52 am | Permalink
Can the USB-stick after having Windows7 installed, be used to get in the complete recovery
enviroment as well?
@ Laker_Fan32
Sorry for the delay. I think you need to copy all the files once again. Just try it.
@ Siddarth
I didn’t try that method. But I have another method which works on XP as well. Will post
the guide soon.
@ Nick
Make sure you copy all the Windows 7 files to USB correctly.
@Suavi
Basically, I haven’t tested this method on 64-bit machine. So, I can’t find a solution for you.
Thank you.
Into Windows
38. tyson
Posted January 23, 2009 at 2:29 pm | Permalink
Hi, I read d comments & got confirmed that this method works although i didn’t try it. I
want to install windows xp by USB method. Can you also give a method like this for windows
xp also?? I am currently running windows vista & don’t have an optical drive.
Only one minor issue if you are trying to create a W7 64-bit bootable drive on a 32 bit
install of Vista. In that case you’ll have to run the bootsect command from a 32-bit W7
DVD, because the version on the 64-bit DVD will not run on a 32-bit OS.
40. cdnwood
Posted January 26, 2009 at 9:13 am | Permalink
Thank you! Absolutely brilliant – your guides have been very helpful!! It all worked just as
you have so thoroughly described.
41. Fzang
Posted January 26, 2009 at 2:29 pm | Permalink
Um, couldn’t you have skipped step 5 and onwards? You just need to do the diskpart and
then copy contents of the CD to your USB, at least, that’s what worked for me
Just wondering..
43. Andy
Posted January 28, 2009 at 11:32 pm | Permalink
Thanks mate for this, very detailed and very user friendly, i tried to install Win xp on my
EEEpc 1000H but for some reason it wouldnt boot unless i put the USB stick in….lol, its
mad when Win 7 is much easier to setup and install than XP.
Anychance of letting me know how to dual boot with Windows 7 and Ubuntu Easy Peasy ?
44. Nick1
Posted January 29, 2009 at 2:41 am | Permalink
Correct me if I’m wrong, but step 5 states that we need a DVD. I use this guide because I
don’t have one. Am I right?
45. cmerg
Posted January 30, 2009 at 4:35 pm | Permalink
46. Man
Posted February 2, 2009 at 9:56 pm | Permalink
Hi.
In the list disk step,I can’t see my USB drive. What’s wrong with it? (My Operating System
is XP.)
47. SENTY
Posted February 4, 2009 at 12:29 pm | Permalink
HEY I HAVE PROBLEM IN THE LAST STEP .. MY DVD ROM IS NOT WORKING
CORRECTLY.I HAVE IMAGE(NRG) OF WINDOWS VISTA.I LOAD IT USING A
IMAGE READER SOFTWARE (POWER ISO),WHEN I TRYING TO EXCUTE THE
LAST STEP USING VIRTUAL DVD ROM THAN THE ORIGINAL DVD ROM,I GOT
A EXCEPTION
“COULD NOT FIND MAP DRIVE PARTITION TO THE ASSOCIATED VOLUME
DEVICE OBJECT:
ACCESS IS DENIED”
HOW CAN I SLOW IT ..?,PLS HELP ME .. SND ME MAIL ON MY MAIL
ACCOUNT…
48. tweakwindows
Posted February 5, 2009 at 2:15 pm | Permalink
@Man
This method works fine on Vista and Windows 7 only. I will be writing a guide for XP
users in a week. Stay tuned!
@Nick1
I wrote this guide to make the installation faster. In my personal experience Windows 7 took
just 15 minutes to get installed from USB compared to 35 minutes DVD method. Of course,
you can skip the step 5 if you can mount the image and copy the files.
@Andy
Sorry, I am not planning on that. But, it should be easier if you install Linux over Windows
7.
@Bob Sauve
Follow the same procedure. This method works on both Vista and Windows 7.
@Tyson
Wait for few days to get a detailed guide.
@Fzang
NTFS is faster than FAT.
Admin
http://www.intowindows.com
49. ELPY
Posted February 5, 2009 at 5:08 pm | Permalink
Awesome,Think!!!
50. asd
Posted February 11, 2009 at 3:44 am | Permalink
well im gonna try this from my phone. hope everything works out ok
51. TY
Posted February 12, 2009 at 4:58 am | Permalink
About th LIST DISK command, I can not see my USB drive number (As you so the
instruction below). so how? i see only my Hard Drive. what can i do?? pls help me!!
52. omg
Posted February 17, 2009 at 8:47 am | Permalink
but i’m on Vista x86 and i was trying to make a usb with Vista x64 on it, but the cmd
prompt gave me this error! –
“This version of X:\boot\bootsect.exe is not compatible with the version of Windows you’re
running. Check your computer’s system information to see whether you need a x86 or x64
version of the program, and then contact the software publisher”
Pls help
53. Cobrass2
Posted February 25, 2009 at 1:09 am | Permalink
54. JD
Posted February 26, 2009 at 3:25 pm | Permalink
I used leechers method and continued from step 5.. wehen attemping to boot from USB I get
“disk read error”
55. Sjengie
Posted February 27, 2009 at 6:34 pm | Permalink
Hi, i tried it using my 4Gb microSD but like Darin my HP mini-note 2133 (which offers
boot option through “USB generic STORAGE DEVICE”) boot manager comes with an
error “the boot selection failed because a required device is inaccesible”.
I worked through all the steps as described above without any errors.
But i notice that diskpart command DETAIL DISK shows that “Bootable = No”
Si is it bootable yes or no and what might have gone wrong?
thx, btw great job this site !!
56. Sjengie
Posted February 27, 2009 at 7:03 pm | Permalink
57. pete
Posted March 2, 2009 at 8:21 pm | Permalink
Hi ive tried and tried but DISKPART wont see my usb key, can u help.
58. ajin
hey it is showing cannot find bootmngr press crl alt del to restart
59. Anthony
Posted March 5, 2009 at 2:10 am | Permalink
Great guide. You need to update your requirements section to point out that these
instructions only work when done on a Vista or Windows 7 platform, or specifically state
they will not work on XP
60. tweakwindows
Posted March 5, 2009 at 7:38 am | Permalink
61. tweakwindows
Posted March 5, 2009 at 7:50 am | Permalink
@ajin
I hope you have followed my steps correctly. Try to repair your bootmgr file.
62. tweakwindows
Posted March 5, 2009 at 7:52 am | Permalink
Sorry, if you can’t find see your USB drive in the DISKPART command, I can’t help you.
However, if you have only one hard drive, then you can use the “1″ as your USB key. But
try this on your own risk.
63. Pinko
Posted March 18, 2009 at 12:26 am | Permalink
64. Pinko
Posted March 18, 2009 at 4:22 am | Permalink
65. Swanny
Posted April 10, 2009 at 10:25 pm | Permalink
I have try all the step by step but on the stage command E:\boot>BOOTSECT.EXE /NT60
F:
I got this message ‘Could not map drive partition to the associated volume device objects:
Access is denied. Any idea what went wrong. Please help. Thanks.
66. jickie
Posted April 30, 2009 at 9:44 pm | Permalink
awesome guide does exactly what it says on the tin, thanks so much i’m now installing
windows 7 on all my mates comps via usb.
67. Jeff
Posted May 5, 2009 at 3:46 pm | Permalink
excellent guide. thanks very much. you saved me aged of messing with BartPe again trying
to make a bookable installation drive.
thanks.
69. Quan
Posted May 5, 2009 at 11:55 pm | Permalink
Let’s say I have a hdd box with 2 partitions (Y, Z), can I use your method to create boot
install for Vista on partition Y and for Windows 7 on partition Z?
70. JB
Posted May 10, 2009 at 9:30 am | Permalink
71. Brad
Posted May 10, 2009 at 11:15 am | Permalink
Thanks a lot! Worked no problem. It also fixed the partition tables on my USB key!
72. Cooper
Posted May 10, 2009 at 10:08 pm | Permalink
73. ID
Posted May 13, 2009 at 12:59 am | Permalink
When are the mongs gonna read and understand this guide does not work on xp.
74. Joeypesci
Posted May 13, 2009 at 4:48 am | Permalink
For everyone having issues with diskpart in XP not seeing the USB stick, it’s because that’s
an XP issue. The way XP and Vista handles USB drives, Vista sees them in Diskpart but XP
tends not to. There is a reg hack to fix it but I haven’t bothered to search for it.
75. Joeypesci
Posted May 13, 2009 at 4:48 am | Permalink
76. J
Posted May 13, 2009 at 6:11 pm | Permalink
Works 100% in my Notebook. I wanted to install Vista Ultimate with a 8GB USB Pen and i
made it!
Thanks!
77. Christopher
Posted May 13, 2009 at 11:02 pm | Permalink
78. Iam
Posted May 14, 2009 at 10:37 am | Permalink
Funny thing I noticed on Win7, when you EXIT the DiskPart and try to continue in
Command Prompt, while copying the bootsector to device, you may face an error – Access
Denied for no priviledge in copying the bootsector to device.
Solution – just Exit the Command Prompt and Run it again (still need to Run as
Administrator).
79. DanielRemains
Posted May 20, 2009 at 9:51 pm | Permalink
I’m sure this is another arrengement with MS and USB driver manufactuer to make money
LOL joke
Nice guide I will have to steal my girlfriend’s USB drive (Which I bought her for christmas
LOL) to try this. Looks like it’s worth it thanks
80. pirater2113
Posted May 21, 2009 at 5:55 am | Permalink
so if you do this tut correctly on a vista computer then you can use the pen drive on a Xp
computer?
81. Jay
Posted May 21, 2009 at 9:01 am | Permalink
Hey Bro can one dual boot using this…. ie. Vista and Windows 7
82. mads
Posted May 21, 2009 at 8:21 pm | Permalink
83. Omer
Posted May 22, 2009 at 2:22 am | Permalink
Dear,
Y is it so?
84. mike
Posted May 22, 2009 at 7:12 pm | Permalink
FORMAT FS=NTFS
(Format process may take few seconds)
85. mike
Posted May 22, 2009 at 7:13 pm | Permalink
What if I want to rollback changes made to my USB drive? Or can I leave it like that
(partitions, ntfs) for regular use after installing windows 7?
86. admin
Posted May 22, 2009 at 11:26 pm | Permalink
@Jay
Yes, you can dual boot.
87. admin
Posted May 22, 2009 at 11:28 pm | Permalink
@ pirater2113
You can use this to create bootable USB on Vista and 7 only. If you have created on a Vista
computer then you can use it on a XP computer to boot.
88. Yue
Posted May 23, 2009 at 4:35 pm | Permalink
i tried it and it won’t work, i am using an old portable hard drive which is 5 gb, is it alright
with it?
89. znakistu
Posted May 26, 2009 at 12:34 am | Permalink
10x a lot
90. trav
Posted May 27, 2009 at 12:16 pm | Permalink
91. anil
Posted May 27, 2009 at 2:00 pm | Permalink
92. Tweakwindows
Posted May 28, 2009 at 1:11 am | Permalink
@Trave
I haven’t personally tried using SD card. But you should be able to do that.
93. Tweakwindows
Posted May 28, 2009 at 1:13 am | Permalink
@All
We are going to close the comments for this post.
94. JP Jones
Posted May 29, 2009 at 12:35 am | Permalink
I used this method successfully on two computers. I was very surprised that when I was
unable to change the boot sequence to USB in the BIOS on an older laptop, windows 7
installed anyway. I was pretty sure that it wouldn’t work but I tried it and presto! It went
through the three reboots and installed perfectly. Has anyone else had this happen?
95. William
Posted May 30, 2009 at 7:19 am | Permalink
this method from microsoft takes out the last part using bootsect. and it still works.
http://technet.microsoft.com/en-us/magazine/dd535816.aspx
97. aaraza
Posted May 31, 2009 at 12:40 pm | Permalink
Hi,
Great guide. However, I am stuck after:
The message I get is: “Could not map drive partitions to the associated volume device
objects: Access is denied.”
I followed the steps twice niowand get the same result. Am I missing something? Would
greatly appreciate any help…I have a netbook down and would like to put Windows 7 on it
using a USB stick.
Thanks!
98. aaraza
Posted May 31, 2009 at 12:44 pm | Permalink
Please ignore my last message – I was not running command prompt as Administrator!
You can follow my guide to creating a bootable usb disk under windows xp then follow this
guide from 5 onwards.
101. Giorell
Posted June 4, 2009 at 12:15 pm | Permalink
I want to ask something. Can I return my flash drive back to normal after this? Leave a tagg
on my guest book or email me rather.
102. murtaza
Posted June 4, 2009 at 12:30 pm | Permalink
Hey..hv vista already installed on my pc..need 2 install win 7 as dual boot..i tried once dual
bootin with xp bt resulted into bootin f only xp..cud u pls help me out hw 2 dual boot win 7
wid vista…
103. ferris
Posted June 5, 2009 at 10:57 am | Permalink
Best guide I have ever used… Thank you, hats off sir.
104. Bogdan
Posted June 5, 2009 at 10:48 pm | Permalink
I find it funny that you say this is a 100% working guide but you don’t mention that fact that
the Win 7/Vista USB boot drive needs to be created on computer running Windows 7 or
Vista. That should really be added to the Requirements section so you can call your guide
100% working. I seen a few comments from people saying it doesn’t work because they’re
trying to make the boot drive from within XP.
105. Bogdan
Posted June 5, 2009 at 10:49 pm | Permalink
Other than that small piece of missing information, the guid e is great!
106. Jacob
Posted June 6, 2009 at 8:34 am | Permalink
trying the F:CD BOOT command (where F is my DVD drive location), it returns the
following functions
Firstly, from DISKPART (which you didn’t say to leave, not sure if you meant to or not)
107. Jacob
Posted June 6, 2009 at 8:38 am | Permalink
thankyou but, your guide seems very will explained (just having some technical issues
108. Mark
Posted June 6, 2009 at 9:40 am | Permalink
Awesome work! Clear and very simple! For everyone having problems, keep in mind the
guide is only for:
- Windows 7 installing / not running from an USB drive
- MB with USB boot support
PS:
109. TSurF
Posted June 6, 2009 at 11:47 am | Permalink
110. Shaz
Posted June 7, 2009 at 8:49 pm | Permalink
Thank a lot. Very useful tutorial… I followed it all through until I boot through usb and
setup program comes up. When I get to, select which drive you want the installation I cant
select my usb drive it comes up with the message below:
I tried 3 different computers and a few new laptops and come up with same message. I read
these forums and people successfully installing them, What am i doing wrong. Can you
please Help.
I’ve been at this for almost 2 weeks.
I can boot from usb but can’t install onto it. I am trying to install vista.
THANK YOU
111. admin
Posted June 7, 2009 at 11:14 pm | Permalink
@Shaz
You can’t install Windows on USB using this guide. You can only use this guide to create a
bootable USB and then use it as installation media.
112. Shaz
Thanks a lot for fast reply. Is there a way that I can install vista onto my external hard drive?
if so how is it possible.
Thank you
113. CMal
Posted June 8, 2009 at 9:41 pm | Permalink
Well chuffed ;D
It works fine, except one problem: when I run the windows7 64bits RC1 \boot\bootsect.exe
in my Vista 32, it doesn`t work. I did it running from the \boot folder of the windows7
Beta1 32bits and it is OK.
115. Laymain
Posted June 9, 2009 at 11:47 pm | Permalink
If you have a version problem with bootsec.exe, just use bootsec.exe from a Vista DVD. Put
back your Windows 7 after and continue following the guide
116. Gregor
Posted June 11, 2009 at 12:33 am | Permalink
117. xopher
Posted June 11, 2009 at 9:37 am | Permalink
as an Ubuntu user I enjoyed being able to do this kind of stuff from Win7 7127 on my
desktop to make this 7210 for my netbook without using linux.
imagine that.
118. JakeDK
Posted June 11, 2009 at 4:06 pm | Permalink
Had a problem with step six but thats because the written command is wrong, but I figured
it out when I saw the command in the scrren thx again – just what I was looking for.
119. Bernard
Posted June 12, 2009 at 2:15 am | Permalink
I used this method and created a USB drive for my Windows 7 installation. Works
flawlessly! Oh, and the installation of Windows now takes only 8 minutes.
120. Brantyr
Step 2: don’t you guys know if you hit winkey + R you get the oldschool run box which
automatically starts whatever you run from it with admin privledges?
121. Chris
Posted July 11, 2009 at 9:44 am | Permalink
To those, like me, that are (were) running Vista 32-bit and wanting 7 64-bit:
In step 7, use bootsect.exe from your Vista CD. Barring any other issues, it will work
perfectly. It did for me.
122. DaveG
Posted July 11, 2009 at 12:27 pm | Permalink
Hello, TweakWindows, and thanks, but… I know what you mentioned about Vista, which I
AM using, I used a Sandisk 8GB and waited half an hour for the formatting process (hardly
a few seconds, but I wasn’t surprised, and I’d like to know how you get that on a 4GB flash
drive), I followed each of your steps in order twice while running an Administrator
command session, with positive feedback after each command was completed, and then I
reordered my BIOS boot priority (which had the same effect as hitting F12, other than F12
not requiring another BIOS session to boot normally from your hard disk again). Looks like
I did everything right, and STILL I can’t boot from a flash drive. I see most others have not
had that problem, but I made sure that I did what you said, with the right stuff, and still I
crashed with this error: “BOOTMGR NOT PRESENT (or MISSING, something similar),
and that was after the “BOOTMGR.EXE /NT60…” command completed with success! I
know nothing of boot managers, much less repairing them, but I sure would appreciate a
clue (wherever it is)! I am close to hopelessly frustrated on this, even if this is the best
tutorial I’ve seen so far, and if I can’t resolve it here I will probably give up – please help!
123. DaveG
Posted July 11, 2009 at 8:52 pm | Permalink
Oh…did I misunderstand that this is for making use of an image file? Is that not how Vista
is normally distributed, on a normal DVD? I am trying to install a modified version of Vista,
distributed by .iso, for two very good reasons: 1) I’m on a bloatware diet, and 2) I’m trying
to replace what I already paid for, after it got wiped (yeah, the whole freak’n disk), and if
you Microsoft pirate hunters have a problem with that, then you can go impale yourselves
on your own swords! To any who would clue me in on what else may be needed besides the
image file (after following the above steps), or explain any non-troll reasons why this
method would not work with what I am trying to do, I’d be most grateful.
If you have Windows XP all ready installed just fallow 6. 7. 8. 9. Before this steps format
your USB FLASH drive in NTFS format. It’s all ready works to Windows 7 and Windows
Vista
125. PCLove
Posted July 13, 2009 at 9:01 pm | Permalink
On #4 where the file system is being set, you can use QUICK to speed up the formatting
like this:
126. ????????
Posted July 15, 2009 at 9:04 pm | Permalink
Thanks!
127. kuld33p
Posted July 19, 2009 at 12:02 am | Permalink
I am getting a window at the installation process to select a driver. I can not go pass that..
any idea.. I tried to select windows/inf folder as well.. but no luck.. installation does not
proceed.
128. JonJon
Posted July 19, 2009 at 3:12 am | Permalink
Hello, I’ve already tried this guide a week ago and it works. I have windows 7 in my hp
mini 2140. But now I want to downgrade again back to Windows XP.
Can I use this guide again? but rather than to put the windows 7 installation in the usb it
would be the windows xp? Or should I search another guide for this? I haven’t tried it yet. I
just want to ask here first before I try.
Regards,
129. konrad
Posted July 19, 2009 at 10:21 pm | Permalink
130. admin
Posted July 20, 2009 at 11:06 am | Permalink
131. Me
Posted July 20, 2009 at 5:44 pm | Permalink
Hi,
132. ive
Posted July 21, 2009 at 2:56 pm | Permalink
some bios don’t recognise NTFS formatted usb keys as boot device, so you might still want
to format as FAT32, even if it makes your key slower
133. Jean-Sébastien
134. Peter
Posted July 22, 2009 at 8:37 am | Permalink
Hi Admin,
Quick question- Would this method work with my Vaio boot disk? instead of a standard
windows cd. Thanks in advance.
135. Mahesh
Posted July 22, 2009 at 7:45 pm | Permalink
When I tried executing “LIST DISK” in command prompt,I couldnt find my USB drive
listed in.
So I couldnt proceed.
Please guide me
136. Shom
Posted July 26, 2009 at 7:14 am | Permalink
If the flash drive has been previously used for as a bootable installer for a Linux distro then
the MBR needs to be reset, which can be done by modifying the Step 7 command to:
bootsect /nt60 H: /force /mbr
This will remove the Master Boot Record so Windows boot loader will kick in, instead of
Linux (GRUB).
137. admin
Posted July 26, 2009 at 10:28 pm | Permalink
@Peter
Bootable Windows DVD or Image is required to make this happen.
138. Franck
Posted July 27, 2009 at 2:11 pm | Permalink
For the ones that do not want to burn a blank DVD, you can mount the .iso file you
downloaded (e.g. using VirtualCloneDrive) and do the copy from there.
Will give this tutorial a try shortly to get the SevenRC on my X200 (small & great but no
optical drive).
139. Bernard
Posted July 27, 2009 at 11:58 pm | Permalink
Hi. I followed this guide to make a bootable Windows 7 usb drive a few weeks ago, and it
worked perfectly!
Now I have downloaded a new version of Win 7 (The RTM released just recently), and I
wonder if I have to follow this guide from step 1 to remake the bootable drive, or is it
enough for me to erase the content on the flashdrive and then copy from the image, the last
step?
140. Waqar
Posted July 28, 2009 at 4:03 pm | Permalink
usb drive will be not available when use diskpart command in windows xp. you should use
vista or later versions of windows.
142. Patrick
Posted July 30, 2009 at 3:02 am | Permalink
all that is necessary is to format your USB and then copy all files from the the cd/dvd(iso or
whatever) to the device. Then just to be sure to boot from the device via the bios or boot
selection.
143. Michael
Posted July 30, 2009 at 10:57 am | Permalink
Has anyone found out a solution to the problem of it sating BOOTMGR not found. Press
ctrl alt dlt to restart when trying to boot it. I can’t get passed that.
144. Torpido
Posted July 31, 2009 at 3:09 pm | Permalink
I have a U3 Software on my USB, its basically there for Exploring and locking the USB, if i
copy entire system File(U3) and then paste it back after a format for the purpose of above
guide will i be able to still use it the U3, and if yes must i format it back to FAT32?
145. Mark
Posted July 31, 2009 at 10:06 pm | Permalink
After trying over and over i finally got it. It was bringing up my vaio recovery tools, so I
had to take my hdd out of the boot order and it worked like a charm.
146. Franck
Posted August 1, 2009 at 2:35 am | Permalink
I got the install to run on the X200 using the USB, but I had to deal with a “cannot create or
locate system partition” error. That is an error linked to the usage of USB media and not
DVD.
If the USB is first in the BIOS, then the Custom upgrade option simply fails to find the
HDD where to create the system partition (100MB)… I initially wanted a dual-boot of my
Lenovo-Vista, but I had to completely format the drive finally. Once blank, I could put it
first in the BIOS (since not bootable yet)… and the system booted on the USB.
nice article..thanks
148. Yan Li
Posted August 5, 2009 at 3:36 am | Permalink
Hey, thanks for this great article. I’ve used this several times already, since I felt my
original windows 7 64-bit was not to my liking on my new laptop. I found out why the
“bootmgr is missing” message was showing after correctly carrying out all the instructions.
I put the Windows 7 ISO on my usb instead of the folders/files inside the Windows 7
ISO/CD!
149. VladamirTOM
Posted August 7, 2009 at 9:04 pm | Permalink
Great guide. Worked perfectly thanks a lot. Now I don’t have to worry about finding a disc
drive just for a folding rig.
150. Kusta
Posted August 8, 2009 at 3:38 am | Permalink
If you click right, you get properties of the drive – any drive – and then click “format”. I
think that will short this procedure of formating drive, for those who do not like to typing.
151. Hisham
Posted August 8, 2009 at 6:35 pm | Permalink
I have a problem here !! someone could help me please ?? When I’m formatting the USB
Drive and after it finish I got this msg: “DiskPart has encountered an error: The parameter is
incorrect.
See the System Event Log for more information.” What’s that supose to mean ?? Could
anyone give me the solution please.
Thanks for the guide. Perhaps you should update it with Shom’s comment(#137). I was
using a usb stick that formerly had the linux grub loader on it. I was getting the missing
bootmgr error message until I used the /force /mbr option like Shom suggested.
Also, formatting is very slow – I would add the QUICK option on the format command.
Although in Windows 7, I can just right click on my usb drive letter in my computer &
quick format it using NTFS – bypassing DISKPART altogether.
153. Barry
Posted August 9, 2009 at 12:42 am | Permalink
154. Nikunj
Posted August 9, 2009 at 6:43 pm | Permalink
155. Pali
Posted August 10, 2009 at 2:31 am | Permalink
Thanks for this guide! Exelent job. Thank you again! Pali from Hungary.
156. Marleybrit
Posted August 10, 2009 at 11:05 pm | Permalink
Please don’t try this on your Windows XP Pro Operating system and waste your time.
Can somebody please tell me similar 100% working guide for triple booting Windows 7 +
Windows XP + Ubuntu Linux.
Troubles… I can boot from the USB stick into the Windows setup 7 fine. However, every
time the computer restarts, it restarts the setup.
So… During the next restart I pulled the USB stick out and Windows “started”. The setup
picked up where it left off. The green bar wasn’t moving at all though.
So I ran it all again – I rebooted (with the USB stick plugged in), reformatted the destination
drive, re-ran the full setup, pulled the stick out for the first restart… You know that black
screen where you can choose safe mode or regular mode? There are 2 Windows 7 options
there and every time I repeat the above, it adds another Windows 7 option.
What am I missing??
CD /D D:\Boot
161. NoR3N
Posted August 15, 2009 at 5:19 am | Permalink
thx a lot You save me many Hours from searching external dvd drivers… Perfect JOB!!!
162. RnR
Posted August 15, 2009 at 8:37 pm | Permalink
163. CK117
Posted August 17, 2009 at 4:20 am | Permalink
If you have problems with the BOOTSECT.exe part, just add /force to the end.
164. Robert
Posted August 19, 2009 at 11:20 pm | Permalink
Thanks a bunch for this tute, it has saved me hours of frustration and bad words.
I created a USB install and will use it tonight on my guinea pig system.
165. JB
Posted August 20, 2009 at 3:06 am | Permalink
Also, my source was an ISO of the x64 RTM build. First try, I mounted this with MagicISO
and copied files with explorer – had a problem with a missing file “boot\bcd”, so I started
again, but used 7-zip to extract the iso, and am now through with the install, which flew by
in just 20 or so minutes.
I think that copying files from the magiciso mounted iso was not the ideal way to go… 7-zip
seems to have done the trick for me.
166. JONNYK
Posted August 21, 2009 at 3:01 pm | Permalink
Go to device manager and go to properties and select policies, and select the “better
Performance” the bottom one for you to use the BOOTSEC.EXE part.
167. Mindslight
Posted August 22, 2009 at 11:42 pm | Permalink
Thanks !
168. Josh
Posted August 25, 2009 at 4:57 am | Permalink
Excellent stuff. I tried following “other” sites’ instructions only to find they didn’t even
create the boot sector. This worked like a charm. Thanks!
169. Anonyme
Posted August 26, 2009 at 9:50 pm | Permalink
170. rockystuud
Posted August 28, 2009 at 12:35 am | Permalink
Hi ! Thanks. It works fine . Thanks a lot for your effort and clear instructions.
171. jiji
Posted August 30, 2009 at 1:59 am | Permalink
“FORMAT FS=NTFS
(Format process may take few seconds)”
173. YASEEN
Posted September 4, 2009 at 8:13 pm | Permalink
AWESOME!!!
174. vagothcpp
Posted September 5, 2009 at 9:22 am | Permalink
175. Harris
Posted September 7, 2009 at 10:30 am | Permalink
thanks bro..
176. JHANU
Posted September 10, 2009 at 12:34 pm | Permalink
For those of having the 32/64 bit problem, just follow the beginning of the guide and after
you finish formating, copy & paste (drag and drop) the contents of the dvd (which you can
virtually mount on your hdd) onto the usb stick. it will be bootable and will work!
178. Zak
Posted September 12, 2009 at 12:54 pm | Permalink
179. e
Posted September 12, 2009 at 11:38 pm | Permalink
180. klokluider
Posted September 22, 2009 at 1:07 pm | Permalink
after finished you have a bootable usb drive which is able to get in a xp environment.
3. Now copy the content of your win XP CD to a folder XPCD on the flash drive (x:\xpcd)
4. after copying boot the drive in the PC and select Compatibility Mode (Memory Mapped)
5. after finished you select the commandline and type
6. first enter the xpkey and name of the computer and region then click next
7. Now you’re asked if you want to upgrade to the XP NTFS filesysten, select “NO” for this
then hit Next.
8. It’ll now see “Copying installation files” and the familiar green progress bar. Shortly after
“Copying Installation Files” is complete, setup will close without notice or any type of
prompt, this is normal.
9. remove the flash drive and Reboot your computer and setup will continue from the hard
drive where you can choose to install XP or do a repair install if XP is already installed.
http://ubcd4win.com/forum/index.php?showtopic=11375&st=570
181. Malone
Posted September 27, 2009 at 2:48 pm | Permalink
Kingston 8GB
Windows 7 RC
on Dell Optiplex GX270, BIOS A07
See screenshot.
182. Simran
Posted September 28, 2009 at 9:38 pm | Permalink
I have installed windows seven using the method provided by you but I am not able to play
my pen drive in my car CD player. I mean when I try to play songs in my car, it do not work
now. Please give a solution.
183. Malone
Posted September 29, 2009 at 11:08 pm | Permalink
@Simran
Format, and write songs again on it.
FAT32 will be OK.
184. acme
Posted September 30, 2009 at 4:12 am | Permalink
do you have to copy the entire contents of the win7 disk? my thumbdrive isn’t that big.
185. jj
Posted September 30, 2009 at 10:46 am | Permalink
D:\boot>bootsect.exe /NT60 H:
Target volumes will be updated with BOOTMGR compatible bootcode.
Could not map drive partitions to the associated volume device objects:
D:\boot>
——————–
Any suggestions?
186. cj
Posted September 30, 2009 at 11:20 am | Permalink
i will tell you one thing,this is the first advice i have gotten from that internet that works
perfectly,i wanted to upgrade my pc to 7 so i formated my vista not knowing that my cd rom
was messed,so i was running out of options to install 7 until i saw this and i saw all the
instryctions carefully,here i am with my pc typing this and my pc is perfectly in shape,thank
you very much,you are a saviour
187. admin
Posted September 30, 2009 at 11:22 am | Permalink
@Acme
Yup. You need to copy all the contents you your thumbdrive.
188. Faisal
Posted October 3, 2009 at 8:08 pm | Permalink
good job…. my laptop dont have DVD drive. Thanks for the post
189. widL
Posted October 13, 2009 at 2:31 am | Permalink
190. vietha
Posted October 13, 2009 at 6:56 pm | Permalink
thx alot
191. Scott L
Posted October 14, 2009 at 4:51 pm | Permalink
I would just like to let anyone and everyone in here know that I specifically followed this
guide yesterday for XP and it worked.
http://www.liliputing.com/2008/04/install-windows-xp-on-mini-note-usb.html
Since the comments here are confusing : NOTE this guide is not to create a Win 7 USB
stick under XP but to actually make a Windows XP stick under Windows XP to install XP,
it worked for me and seemed to have the least amount of fiddling.
- Enjoy.
192. licitatii
Posted October 14, 2009 at 5:05 pm | Permalink
very nice tutorial but please help me. Everithing works well but when it’s go to drive option
(where you format you disk) it ask about a device driver to load and install ?????? What
to do? setup cannot continue…
you most do these commands in windows “safe mode” to avoid the “Access denied”
message.
YEAH TNX DUDE… ^_^ ANOTHER NEW IDEA ON INSTALLING WINDOWS 7 ^_^
NICE POST
jj
Posted September 30, 2009 at 10:46 am | Permalink
D:\boot>bootsect.exe /NT60 H:
Target volumes will be updated with BOOTMGR compatible bootcode.
Could not map drive partitions to the associated volume device objects:
D:\boot>
——————–
Any suggestions?
HEY jj JUST COPY ALL THE CONTENTS IN YOUR WINDOWS 7 TO YOUR USB IT
WORKED JUST FINE… ^^
196. Martin
Posted October 17, 2009 at 12:31 am | Permalink
Hello,
I have the folders for Windows 7, and I want to burn a DVD to install from (I need to
format my PC, so I can’t just install from within XP). However, I can’t just burn the files to
the DVD, cus then it won’t let me boot from it.
Any ideas on how to do just that? How do I make it bootable?
197. Jackson
Posted October 17, 2009 at 4:25 am | Permalink
So.. can I still used the usb drive after this? Can I reformat it to fat32?
198. Zaino
Posted October 19, 2009 at 1:50 pm | Permalink
hey really great guys, but i couldnt show my usb drive in step “LIST DISK” only the local
drivers…
please help.
199. mugurelu
Posted October 19, 2009 at 2:16 pm | Permalink
Can i use an external hard drive? A partition of it from which to install w7?
200. admin
Posted October 19, 2009 at 4:25 pm | Permalink
@ mugurelu
Since you are going to create a bootable drive, you need to format the drive completely. So,
you can’t use just one partition. And about external drive, it should work fine (I have tested
on flash drives only).
201. admin
Posted October 19, 2009 at 4:30 pm | Permalink
@ Jackson
You should be able to format it with FAT 32 or NTFS.
202. ceeque
Posted October 20, 2009 at 3:12 am | Permalink
simply does not work. One of the main reasons being is you have typed out the commands
in the text differently to what you have input into the command screen, you have ommitted
the spaces in your text yet placed spaces in the command prompt, and even after correcting
those errors all you get is:”bootsect.exe is not recognised as an internal or external
command, operable program or batch file”
Yet another waste of yours and my time……
203. Vandit
Posted October 20, 2009 at 8:27 am | Permalink
205. JM
Posted October 23, 2009 at 2:10 am | Permalink
Works great in XP
206. Anasazi
Posted October 23, 2009 at 4:36 am | Permalink
I just tried to install win7 using this guide but when I tried to boot from the usb drive it said
bootmgr is missing. But I did every step here and the bootsect command was successful.
207. Raul
Posted October 24, 2009 at 2:32 pm | Permalink
208. Zack
Posted October 25, 2009 at 12:39 am | Permalink
Hello, If you are running Windows 7 already you can just go into Computer and then format
it like you regularly would format a usb drive as NFTS. It saves quite a bit of time and
basically cuts this process in half.
209. Xerxz
Posted October 25, 2009 at 5:11 am | Permalink
What if i dont have the cd and i just have the files on my pc what do i do then??? any help
would be much appreciated.
210. admin
Posted October 25, 2009 at 11:53 am | Permalink
If you have Windows 7 ISO, you need to extract it first to a folder and then to the USB.
211. CHINMAY
Posted October 26, 2009 at 7:19 pm | Permalink
212. John
Posted October 28, 2009 at 8:52 pm | Permalink
213. Ralph R
Posted October 29, 2009 at 3:16 am | Permalink
I was successful in following your instructions, that is after I initially screwed up and
selected my slave HD as though it were the flash drive. My question here would thyen be; Is
there a way for me to restore the partition and data on the “slave” that I inadvertently
cleaned and partially formatted? I know, you need not say it: I am an idiot!
214. Ralph R
Posted October 29, 2009 at 3:19 am | Permalink
I was successful in following your instructions, that is after I initially screwed up and
selected my slave HD as though it were the flash drive. My question here would thyen be; Is
there a way for me to restore the partition and data on the “slave” that I inadvertently
cleaned and partially formatted? I know, you need not say it: I am an idiot!
215. Doron
Posted November 2, 2009 at 5:44 pm | Permalink
216. WiZoOo
Posted November 6, 2009 at 2:19 am | Permalink
awesome guide, works for me with win 7 oem bie final x86. thanks alot dude!
nice one, thanks.. the BOOTSECT command made my usb drive become a viable source to
install Windows 7 on an Asus EEE Pc.
218. Diptiman
Posted November 6, 2009 at 11:50 am | Permalink
It’s not that cool dear. I am trying to do the same(i mean using bootsect.exe) from Vista.
Still there is a problem saying “Your version of bootsect.exe is not compatible with the
current version of windows”. Please suggest.
Thanks
219. admin
Posted November 7, 2009 at 12:02 am | Permalink
@ Diptiman
If you trying to create a Windows 7 or Vista on Vista/7 you should not face any such
problems. And if you trying to create a bootable USB of Vista/XP/7 on XP, you will see
error.
Thank you for this wonderfull solution. It’s easy and worked for me.
221. Alex
Posted November 10, 2009 at 3:24 am | Permalink
222. Michael
Posted November 10, 2009 at 6:32 pm | Permalink
Hi there,
for all the people having problems at step 6 try this
6. Type in the cmd window CD/DVD DRIVE LETTER: and press enter i.e.
D:
Then Type CD BOOT and press enter
Then proceed with step 7
Hope this helps
223. Tomasz
Posted November 12, 2009 at 4:24 am | Permalink
I did EXACTLY as it says and my netbook doesn’t wanna boot from USB…I checked
BIOS settings couple of times and it is set to boot from removable device…which is correct
I guess…no idea what to do
224. Tomasz
Posted November 12, 2009 at 4:43 am | Permalink
OK I found it….when EEE PC starts you need to press ESC key in case to display BOOT
DEVICE SELECTION menu
225. Chase
Posted November 12, 2009 at 5:17 am | Permalink
For those having problems with “access is denied” during the bootsect command, be sure to
open cmd exactly as mentioned in the instructions. I assumed that being logged on as an
administrator or using /runas was sufficient, but I guess things are different in
Vista/Windows 7.
226. hicom5
Posted November 14, 2009 at 6:42 pm | Permalink
problem:
“Could not map drive partitions to the associated volume
device objects: Access is denied.”
————————————————-
answer:
C:\Windows\System32\cmd.exe
227. Jason
Posted November 14, 2009 at 7:07 pm | Permalink
100% working… confirmed! Thanks for the tutorial… it was easy, and accurate.
228. Willaim
Posted November 17, 2009 at 4:42 am | Permalink
229. Navster
Posted November 17, 2009 at 4:56 am | Permalink
230. NICERED
Posted November 17, 2009 at 12:57 pm | Permalink
Any method to know your win7 and vista compatibility (x64, x86…) before installing
win7?
231. Euphie
Posted November 18, 2009 at 9:53 am | Permalink
232. admin
Posted November 18, 2009 at 5:53 pm | Permalink
@Nicered
You can use official Windows 7 upgrade advisor (it’s free) tool to check compatibility
issues. Here is the link:
http://www.intowindows.com/test-your-pc-software-compatibility-with-windows-7-using-
windows-7-upgrade-advisor-final/
Hi~ Thanks for the tutorial currently copying the files hope it works!
234. ahmed
Posted November 24, 2009 at 6:46 am | Permalink
I LOVE YOU!!!
GREAT TUTORIAL!!!
236. dsfjdifja
Posted November 29, 2009 at 7:35 pm | Permalink
why do all this when you can just make virtual cd drive and boot from it? 2 minutes work
lol.
Hi,
Please help !!! Here what I have done:
1.Download Windows 7 iso file,which I put it in isoBuster and extracted.
2.Coz I have listen it is better to make clean instalation,I bought new WD external HDD-
Passport Studio 500 Gb and put it all information from my PC to HDD (around 90Gb very
important data + windows 7 of course)!
3.I run “cmd” and get in DOS
- “diskpart”
- “list disk”
(coz there were nothing,not disk 1,2,3-i just select disk 1-don`t ask me why,coz i don`t
know for myself,coz i am stupid!!!)
- select disk 1
- clean…
After i wrote “clean”,I discconect usb cable,coz I afraid-what does “clean” means!!??
For god sake-i have all informations from last 6 years on my external hard disk…
When I check Device Manager it shows that the device is installed and working properly
but it will not show in “my computer” and I can’t access it.
before the problem,my HDD appeard as drive H:
I wouldn’t be half as frustrated if it hadn’t been working properly before this.Plus-ALL data
is on my HDD,and I don`t even know if it is still there
I do it this:
2 Step Solution for XP users:
Part 1:
Go to
Control panel -> Performance and Maintenance (cannot be in classic view to see this link) -
> Administrator Tools -> Services -> Universal Plug and Play
If Universal Plug and Play is set to manual switch to automatic.
Part 2
Double Click Safely Remove icon on the bottom right-> Select device->click Properties ->
click Volumes -> click Populate -> hit OK -> if nothing shows it may need to be formatted
Also i was in DISK MANAGEMENT,but except formating disk,I don`t see solution
And formating will erase all data on the disk,isn`t it?! (if i have it,of course).
again nothing
238. pawan
Posted December 1, 2009 at 9:44 pm | Permalink
239. pawan
Posted December 1, 2009 at 9:46 pm | Permalink
240. carl
Posted December 1, 2009 at 10:00 pm | Permalink
have tried your process a few times with vista and 7 and works great but whilst installing
windows i get an error code 0×80070241? any ideas why i get this code. pls help
241. Aaron
Posted December 2, 2009 at 12:43 am | Permalink
Finally found a method that works. This actually works!!!!!!!!!!!!!!!! Thank you, awesome.
242. Throwlands
Posted December 2, 2009 at 5:00 am | Permalink
I just finished assembling a new computer that only has SATA connections and all I have
are PATA CDROM drives. Your guide saved me from spending money on a drive I’d only
need once.
Many thanks.
243. Blake
Posted December 3, 2009 at 11:12 am | Permalink
I did every step right and got the right results. Even the Bootsect.exe part. it told me it
successfully created it. i went to boot desktop from USB and STILL got the BOOTMGR is
missing. Now i did it with vista from XP and it worked great. i had the vista install cd. now
from vista to 7 its different. its an .iso file. is that why i cant make it work?
244. Kevin
Posted December 3, 2009 at 12:36 pm | Permalink
I have a crappy Sony upgrade CD and it is not bootable. Could that be why I get that
message? If the CD is not bootable, does that mean I can not create a bootable CD?
245. Todd
Posted December 4, 2009 at 1:35 am | Permalink
I can’t thank you enough.. my dvd-rom has been down, tryed fixing with the filter delete but
computer still doesn’t recognize it, but it spins up at start up, I can put dvd in and it acts like
it wants to but nothin..(yes all the bios stuff been checke, enabled and so on) —– so
needless to say this little fix has been a God sent.. Works like a champ.. the only think that
didn’t work was
“Format fs=ntfs” I formated it the old fashed way..
and in step 6. “D:CD Boot” I had to do “CD/Boot” amazing how that little / makes all the
difference…
I was a computer with xp and a good dvd drive to set up a third drive to boot from and re-
install vista on my laptop..
Thx again..
246. Chris
Posted December 4, 2009 at 2:49 am | Permalink
This is an excellent guide for anyone and I am very greatful you took the time to do this.
Quick note that may confuse people, in step 6 where it states “D:CD BOOT” should be “D:
CD BOOT” as shown in the screen shot.
247. vaitheeswaran
Posted December 4, 2009 at 4:33 pm | Permalink
thanks in advance
248. vaitheeswaran
Posted December 4, 2009 at 4:56 pm | Permalink
BOOTSECT.EXE/NT60 H: ?
249. Gabe
Posted December 7, 2009 at 4:39 am | Permalink
250. Tom
Posted December 7, 2009 at 9:20 am | Permalink
D:CD BOOT
D: CD BOOT
I am not sure if this is posted but for everyone that has the CD as an ISO file you can use
MagicISO to mount the ISO file to a virtual drive so that the system sees it as a CD/DVD.
then just use that drive letter in place of the CD/DVD drive letter in the guide. Worked like
a charm for me.
252. Saleem
Posted December 8, 2009 at 8:49 pm | Permalink
everything went fine. booted on the flash drive, but can’t partition using win 7. installation
stopped there. what to do? tried it on asus Eee mini.
THIS POST WORKS out of the box, but those with problems pleeez pay SPECIAL
attention to the G A P S in the commands. I followed the posters text AND
viewed/compared the same commands in the pictures when I got stuck as others have here,
and it all worked! D:CD BOOT should be D: CD BOOT and hit enter.Where “D” is your
DVD drive letter -> a gap between D: and CD BOOT, which another commenter here
‘Malone’ kindly pointed out and got me hunting for other gaps to finish the job, . Also a gap
at BOOTSECT.EXE /NT60 H: not BOOTSECT.EXE/NT60 H: Follow the posters
instructions and compare against the pictures and you are good to go! Welcome to DOS
commands and sneaky ball breaker gaps which are easy to miss, lol! This is a great post,
just needs a bit of a mop up, many thanks to the poster!
254. Pown
i get a disk read error occurred when i try to boot from the usb i followed the guid and it
should work, whats wrong?
255. matthew
Posted December 10, 2009 at 8:22 am | Permalink
256. waseem
Posted December 10, 2009 at 4:13 pm | Permalink
257. killak
Posted December 10, 2009 at 7:32 pm | Permalink
258. RS232
Posted December 11, 2009 at 8:44 am | Permalink
259. PARAS
Posted December 13, 2009 at 7:16 am | Permalink
I AM USING WIN2FLASH FOR SOME TIME AND BEST PART IT CAN INSTALL
WINDOWS XP AS WELL AS WIN 7 BOTH FROM USB PEN DRIVE.
260. Gregory
Posted December 13, 2009 at 8:48 pm | Permalink
Thank you very much!!! It took a lot of configuring and restarts but I finally managed to
recover my OS with zero data loss. After I back up my stuff, I’ll be installing Win7 using
microsoft’s boot tool.
261. RPJ
Posted December 16, 2009 at 11:30 pm | Permalink
Worked perfectly. Used it on a 4Gb SD card with a USB SD reader to install Win7 64-bit
on an Acer laptop. Many thanks.
262. CrabQuiche
Posted December 17, 2009 at 4:34 am | Permalink
If you are doing this guide from XP, use the HP USB Flash Disk Format tool instead of
steps 3 and 4. This is because XP’s DiskPart Tool does not support The NTFS Formatting
for USB flash disks. Thank you for a great guide. I am working on a tool which does it all
for you, called 7toUSB.
263. Piyush
Posted December 17, 2009 at 10:57 am | Permalink
If u get this message ‘Could not map drive partition to the associated volume device objects:
Access is denied.
264. teejay
Posted December 17, 2009 at 8:13 pm | Permalink
‘A disc read error’…plz help me.i changed the BIOS priority to USB HDD.there were other
options USB FDD,USB CDROM,USB ZIP.
265. Jake
Posted December 18, 2009 at 12:53 am | Permalink
266. kamlesh
Posted December 18, 2009 at 2:31 pm | Permalink
268. admin
Posted December 19, 2009 at 11:09 am | Permalink
@ David Dizzle
It seems your PC doesn’t support USB booting, or your Windows 7 ISO is not bootable.
If it doesnt support usb booting then why is it an option in the boot sequence?
this works like a charm, did a vista install from usb. thanks!!!
271. chacha
Posted December 20, 2009 at 11:23 pm | Permalink
“Could not map drive partitions to the associate volume device object: Access is denied.
I tried the so-called easier guide link, it couldn’t even find an iso file in the windows 7 files.
(It’s on a cd)
And i know there is nothing wrong with the windows 7 cd, i just used it last night to install
it on my uncles comp, which is where i’ve been trying to go through this guide)
I need it on a usb key so i can install it on MY notebook. Help anyone?
272. chacha
Posted December 20, 2009 at 11:30 pm | Permalink
Okay so, access isn’t denied anymore. but it still says the same thing besides that
273. Senior47
Posted December 21, 2009 at 2:19 am | Permalink
274. JaFar
Posted December 22, 2009 at 9:22 am | Permalink
Thanks Chase (post 226) finally found that out and was going to post with solution but seen
yours. Took me 20 minutes to realize that you have to right click and run as admin in Vista
and 7
275. hnnn
Posted December 22, 2009 at 4:45 pm | Permalink
276. rik
Posted December 22, 2009 at 7:23 pm | Permalink
and i got an iso file when i want to select is with the dvd usb tool program it said that it is
not valid
277. toderu
Posted December 24, 2009 at 5:51 am | Permalink
Hello,
great work,
for saving time you can use “format fs=ntfs quick”
that can save some time if you have a big usb stick.
278. CroatianBoy
Posted December 31, 2009 at 4:09 am | Permalink
100% WORKING,
279. Z1pp3r
Posted December 31, 2009 at 3:26 pm | Permalink
280. Sam
Posted January 1, 2010 at 2:15 am | Permalink
Just thought others should know, command in step 7 must have a space after EXE
As published BOOTSECT.EXE/NT60 H:
–Sam
282. Brody
Posted January 5, 2010 at 12:02 am | Permalink
Well, accidentally formatted my external HDD with my movie library, .ISO library, and all
of my pictures on it, but, my fault.
HEY,
KIRITH SIVA.
284. Paul
Posted January 7, 2010 at 4:11 am | Permalink
Man… After days of searching and trial and error, FINALLY this is a guide that WORKS!
I have just installed Windows 7 on my netbook and I am sooooo freakin’ happy.
I blog about computers, software and web development in German and I would like to ask
your permission to translate this guide into German and publish it on my blog. With full
credits to you and a link to the original guide of course.
285. Nathan
Posted January 7, 2010 at 6:21 am | Permalink
Great guide, but MS has now made it much easier for us:
http://store.microsoft.com/Help/ISO-Tool
Awesome. I could restore my system from what you could call as disaster.
Thanks so much.
Vaidy
288. Brandon
Posted January 10, 2010 at 6:04 am | Permalink
This worked flawlessly for upgrading my wife’s PC. She had a DVD ROM drive that
refused to be recognized and this was an awesome work-around and super fast.
Thanks!
289. somebody
Posted January 10, 2010 at 10:55 am | Permalink
290. lucy
Posted January 10, 2010 at 11:20 am | Permalink
you cant copyright anything in the command prompt screenshots that you did using MSFT
instructions for this process.
dolt.
291. Michiel
Posted January 11, 2010 at 4:48 pm | Permalink
About step 6:
D: CD BOOT
The “CD BOOT” is not doing anything. Just D: is enough, anything after that is ignored.
For the rest: thanks for the guide, it’s really helpful for a lot of people I think.
292. renren
Posted January 13, 2010 at 3:36 pm | Permalink
293. XAce
Posted January 17, 2010 at 6:03 am | Permalink
294. Robbie
Posted January 19, 2010 at 11:45 pm | Permalink
hey it wont let me do the last command, BOOTSECT.EXE /NT60 F: , my flash drive is f
and it says could not map drive partitions to the associated volume device objects: access is
denied???????.. what do i need to do
295. slownie
Posted January 20, 2010 at 12:59 am | Permalink
Excellent work, thank you. This is good help the beginner users.
Many thanks
bye slownie
296. zdarova
Posted January 20, 2010 at 3:22 am | Permalink
i had some problems at the begining, as i have raid 0 with amd southbridge.
so guys, for Windows 7 x64 you need the folder /boot from a 32 bit dvd instalation if you
want to prepare the usb drive on a 32bit PC (i used from the DVD of RC win 7 a had from
may 2009…)
thanks!
297. kk kangan
Posted January 20, 2010 at 2:50 pm | Permalink
298. khang
Posted January 22, 2010 at 2:09 am | Permalink
you should clarify step 5 for those who dont have the windows dvd. Mounting an image
isn’t something everyone knows about. Like myself, I am assuming most people who are
gonna use this guide only have the .iso file and not the dvd.
299. Patryk
Posted January 22, 2010 at 8:42 am | Permalink
;( well, mine went bad, really bad, my disk 1 was my second hdd (i realized that after) u
should add how to discover what disk is the usb, i’ve deleted all my most important files;( i
reached active, i didn’t made format, is there a way to take back my stuff?
300. John
Posted January 23, 2010 at 2:58 am | Permalink
Worked Perfectly. I can now have the great W7 on my laptop with a burned up DVD drive,
lol
302. Sinner
Posted January 27, 2010 at 7:36 pm | Permalink
This is stupid, I didn’t have to do all this crap, all I did was format my 4GB flash drive in fat
32 format, copy the contents if the Windows 7 DVD contents to the USB flash drive. And
then set the bios to boot from flash. all done with my mouse, no diskpart or cmd prompt.
303. maseo
Posted January 29, 2010 at 11:00 am | Permalink
@khang, if you only have the .iso file of windows 7 and not the dvd, (install power iso trial-
free online), nxt double click .iso image and it appears in power iso, in toolbar of power iso
click on ‘mount’ select ’1 drive(in drop out menu) follow a couple of prompts and its
mounted….nxt…go to ‘my computer’ and you will see a virtual drive(DVD Drive) their
with the windows 7 in it, right click on it and explore(or open in new window) all the files
are their and you can now copy them to your pen drive.
a much easier and quicker way is (assuming you have power iso installed) is simply right
click on .iso image and mount from their, my computer, explore or open…copy files//simple
really,
304. maseo
Posted January 29, 2010 at 11:10 am | Permalink
@ patryk
if you didnt get as far as format then you should be able to recover files, im assuming your
disc drive has dissapeared from ‘my computer’?? if so, go to start menu>>type partition in
search bar (dont hit enter) clcik on the ‘create and format partitions’ file>>a box will appear
and take a minute or 2 to load in all your partitions…..once loaded you should see your
missing partition/drive…if so right click on it..select ‘change drive letter and paths,>>select
‘add’ from the nxt pop up box>>type a letter in, make sure the letter is not assigned to any
other resources (egzample…type letter R ) once you put the letter in, just click ok, your
partition should be back as normal now in my computer.
305. steve
Posted January 30, 2010 at 12:21 pm | Permalink
This works like a charm. If your having problems try the other easy installation that he has
posted on the link at the top of the page. That one has only 4 steps that u follow. In any case
both of these installation guides have my 5 star rating*****
306. SANRocks
Posted January 31, 2010 at 4:03 pm | Permalink
307. lenny
Posted January 31, 2010 at 10:26 pm | Permalink
it worked you are a star i bought my note book for £50 coz it wouldnt load up,, best £50 ive
spent in a long time thanks to your help,,, cheers
308. Omega
Posted February 3, 2010 at 4:47 am | Permalink
1st off, nice tutorial! I used my iPod touch as a flash disk, and used ultraiso to make the
image<—so far so good, everything loads but I get a message stating that 'device drivers are
missing' [paraphrased] I read around and it looks like it may be cd/DVD not being
supported, but I'm installing from USB, no need for DVD drive help pleez
309. le
Posted February 5, 2010 at 2:17 am | Permalink
that sir,
simply put, is ‘the bollox’,
TUVM
310. antonio
Posted February 6, 2010 at 8:50 am | Permalink
311. admin
Posted February 6, 2010 at 4:48 pm | Permalink
@Antonio
Yes, it will format your drive.
312. Geoff
Posted February 10, 2010 at 9:01 am | Permalink
Worked perfectly!!!
The funny thing was my Windows 7 Ultimate DVD was scratched, so I tried to use my
Windows 7 Home and that didn’t fit on my 4gig USB stick.
Than I tried an 8 Gig microSD card and that did fit…and booted perfectly on my Asus
R1600.
Cheers,
Victor Aroma
314. Rohit
Posted February 12, 2010 at 7:09 am | Permalink
Perfect .. 10/10 !
315. duncan
Posted February 12, 2010 at 12:14 pm | Permalink
316. xkovi
Posted February 12, 2010 at 2:10 pm | Permalink
The easiest way how to install Win7/Vista from usb is just to format your USB stick (from
windows, no cmd line needed!) and extract files from *.iso into root of your USB
stick….nothing else…tested million times
317. zorzer
Posted February 16, 2010 at 2:02 am | Permalink
318. SG
Posted February 16, 2010 at 2:03 am | Permalink
Thanks a lot! The MS tool kept erroring out when trying to create a bottable USB installer
from the DVD. However your instructions worked like a charm…Thanks!
319. aj
Posted February 16, 2010 at 7:10 am | Permalink
Although there are a couple of tools out there to help simplify this process, I just ran across
a new one that works under XP as well. Bootsage is another nice utility to add to your
toolbelt. http://firesage.com/bootsage
320. The-Stoic
You are a legend. Got a SFF here and no DVD or CD-Dom. Used your instructions to get
Windows Home server up and running. Thanks for the info.
322. Harry
Posted February 24, 2010 at 2:51 am | Permalink
Thx dude !
323. Moosewad
Posted February 24, 2010 at 11:23 am | Permalink
once i hit “format fs=ntfs” it just says 0 percent and stays there.
Help!!
324. lakshay
Posted February 25, 2010 at 7:10 pm | Permalink
325. Vicky
Posted February 27, 2010 at 3:47 am | Permalink
Excellent guide.
I need to save this site on my pc.
Extremely useful and helpful
Thanxs.
326. DG3
Posted March 6, 2010 at 12:19 am | Permalink
Thanks for the guide ^^ verry usefull! You saved me from CD/DVD’s with windows and
others!
327. khizer
Posted March 6, 2010 at 11:00 pm | Permalink
nice work!!!
can anyone tell me how to put xp in the usb and make it bootable..please
thanks
328. deo
Posted March 11, 2010 at 2:05 am | Permalink
In case you get error message “Access Denied” in the last step you may need to start
“Virtual Disk” service from Start->Run->services.msc
Thanks!
330. ralph
Posted March 12, 2010 at 10:40 pm | Permalink
Really helpful.
thnx
331. padam
Posted March 13, 2010 at 10:01 pm | Permalink
You should really give the _original author_ credit, instead of pretending like you wrote this
guide yourself.
“link removed”
You turn around and post it here.
You can try to deny it, but it’s the _exact_ same steps in the _exact_ same order, on top of
using the _exact_ same commands, again, in the _exact_ same order.
Plagiarism is baaaaaad.
332. admin
Posted March 13, 2010 at 10:43 pm | Permalink
@Padam
How can you say that just because order of commands are same? You know, one can’t
create a bootable disk by entering those commands in random order. So steps will be same
if you refer other sites too. I can’t blame other sites for that right? You need to execute the
step 1 first and then 2.. You can’t reverse it!
Looks like you guys did a great job copying the instructions from here:
“link removed”
334. padam
Posted March 14, 2010 at 5:19 am | Permalink
“just because [...]“? It’s kinda cute how you ignored the other points. The order of the
commands is important, but they do _not_ have to be executed in that exact order.
Furthermore, I’m even more convinced you have no idea what any of the commands posted
do – as you’re misleading users into thinking that bootsect doesn’t work on XP installs or
vista installs with XP as the target. It’s a matter of changing the /n60 argument to /nt52 for it
to use the master boot code that’s compatible with NTLDR (rather than BOOTMGR, which
is what Vista/7 uses).
“This guide doesn’t work for XP..Only for Vista and Windows 7.. [snip]“
335. admin
Posted March 14, 2010 at 8:45 am | Permalink
@Kevin
I don’t know what to say! For your kind information, Microsoft has given the how to make
bootable usb in its WinPE help guide. Do download and read it before making such
comments.
336. AbhishekDatta
Posted March 14, 2010 at 8:25 pm | Permalink
337. padam
Posted March 14, 2010 at 9:13 pm | Permalink
The fact that you removed the link to his blog from both of our posts speaks volumes in
itself. There are other links all throughout the comments on this page, _none_ of which have
been removed.
kmwoley.com/blog/?p=345
Leave it up this time, let the users make their own decision as who stole it from who.
338. admin
Posted March 14, 2010 at 9:48 pm | Permalink
@Padam
I have deleted the links just because I don’t allow readers to post links in comments. You
might get two or three links in the whole comment section (in this post). And mind that I
could have deleted your comments if i had done so. Hope you got it. Also note that I will be
deleting your future comments as I don’t like to argue on a useless topic.
339. Andy
Posted March 15, 2010 at 12:15 am | Permalink
@admin
y wasting time on useless things/people……..
340. Rob
Posted March 15, 2010 at 4:02 am | Permalink
Works perfect.
Thank you very much for youre efforts!
341. Andrew
Posted March 15, 2010 at 7:17 am | Permalink
Then when you opened your command prompt you did not right-click and run as admin.
342. Peje
Posted March 16, 2010 at 6:25 pm | Permalink
343. Sanjay
Posted March 17, 2010 at 6:09 pm | Permalink
344. mwawe
Posted March 17, 2010 at 8:56 pm | Permalink
im trying to make a usb with Win7 64bit my OS is Win7 32bit and i have problem in step 7.
system sayid:
version of F:\boot\bootsect.exe is proper with version running on this PC….
345. mwawe
Posted March 17, 2010 at 8:58 pm | Permalink
correct:!!!!!
346. MTL
Posted March 18, 2010 at 7:37 pm | Permalink
Great guide. For those of us who are not builders or very familiar with computers, including
a detailed step on how to change the boot priority in BIOS from HDD or CD to USB would
make this guide complete…
Thanks for your time and effort on what is here though – Much appreciated!
Thanks! After trying a lot of “tutorials”, this one WORKED. I’ve finished installing my
Asus 904 HD
Thanks again!
348. Sathya
Posted March 20, 2010 at 12:30 am | Permalink
Thanks a lot!!!!
It worked good for me… Only thing you could further mention is that “diskpart doesnot
recogonise removable storsge in xp” it works only in vista (or) win 7.
349. visions
Posted March 20, 2010 at 1:41 am | Permalink
CD BOOT Problems you need to *press ctrl c then type the commands below 100%
working for me now
350. shakir
Posted March 24, 2010 at 1:37 am | Permalink
Excellent
Thanks
352. underworld666
Posted March 25, 2010 at 6:07 pm | Permalink
Really great!!!
This tips works fine for me.
Thanks!
353. david
Posted March 28, 2010 at 3:51 am | Permalink
i cannot burn cds or photos onto a disc when i try it says put disc into cd drive d .Thanks if
you can help me
354. rudnueva
Posted March 30, 2010 at 10:53 am | Permalink
Does it work in cmd 5.1 bro…? particularly in Windows xp service pack 3…..I tried but it
doesn’t work……thank you
355. Oleg
Posted April 1, 2010 at 7:55 pm | Permalink
Hi
Thanks a lot for info.
Can I have both, vista and win7 on usb stick at the same time? Just out of interest.
Thanks
356. RM
Posted April 2, 2010 at 7:05 am | Permalink
I did this from a Windows 7 computer and was able to install Windows 7 from USB with no
issues at all.
Well done!
357. Patatattat
Posted April 2, 2010 at 8:55 am | Permalink
I did this process on a SATA SSD 16gb harddrive I had, and it worked! Beautiful.
358. Rishad
Posted April 6, 2010 at 5:28 pm | Permalink
Thanks buddy……
359. Rajesh
Posted April 6, 2010 at 5:29 pm | Permalink
Man, just worked like a charm in the second try. First try I had error “COULD NOT FIND
MAP DRIVE PARTITION TO THE ASSOCIATED VOLUME DEVICE OBJECT:
ACCESS IS DENIED”
Solution:
C:\Windows\System32\cmd.exe
360. Tim
Posted April 12, 2010 at 4:42 pm | Permalink
361. Skyler
Posted April 13, 2010 at 9:41 am | Permalink
I did all the steps up until 5 now I was wondering I don’t have Win 7 on a disk just on my
hardrive can I just copy over to my USB at this point? and would I still have to change the
Bios settings?
362. Amos
Posted April 13, 2010 at 9:03 pm | Permalink
Hi, excellent instructions…I’m almost there but when i run format fs=ntfs I get the
following error message right at the end of the format..
i’m on Vista
363. Amos
Posted April 13, 2010 at 9:08 pm | Permalink
actually you can’t continue with the instructions, if you try assign you get “There is no
volume specified. Please select a volume and try again”
364. Krim
Posted April 15, 2010 at 2:46 am | Permalink
When I put the usb in, it gets to the boot screen and says “BOOTMGR IS MISSING” and
I’ve repeated the BOOTSECT steps already.
365. Hannibal
Posted April 16, 2010 at 2:46 pm | Permalink
i also have a WINDOWS 7 AIO DVD 33 in 1 i had put together and put that on a USB too,
also works perfectly.
thanks again
366. Hannibal
Posted April 16, 2010 at 2:51 pm | Permalink
TO AMOS
make sure you fill all details in CAPITAL LETTERS and just take your time to go through
it again.
“Could not map drive partitions to the associated volume device objects :
Access is denied. ”
someone please help me….
368. VolN
Posted April 18, 2010 at 10:55 pm | Permalink
To Zaid
u r the best men i think bcz u simply tell us the setp for install window frm usb.anybody
easily do it. thanx for ue help.
370. miro
Posted April 26, 2010 at 5:51 am | Permalink
You need to add > Type EXIT < To exit the diskpart after formatting. Like this:
6. Maximize the minimized Command Prompt in the 4th step.Type the following command
now:
Great article!
372. leahcim
Posted April 28, 2010 at 9:14 am | Permalink
LeAhCiM
374. hamedshaik
Posted April 29, 2010 at 10:23 pm | Permalink
http://www.intowindows.com/how-to-create-bootable-windows-7-vista-or-xp-usb-flashpen-
drive-with-a-single-click-must-try/
375. Derick
Posted May 2, 2010 at 6:52 am | Permalink
insert the usb flash drive hit any key depending your pc you have to go to the system bios
376. Omni
Posted May 2, 2010 at 7:00 am | Permalink
Works with doing a quick format aswell, as it takes long time to do a regular.
Super guide!
377. Mohamed
378. ferpuj
Posted May 6, 2010 at 9:52 pm | Permalink
Try wintoflash and forget all your usb problem, all you need installation cd win7/vista/xp
wintoflah and usb stick 4gb for 7/vista 2gb for xp… drivers and stripcan do it later.
379. mani
Posted May 12, 2010 at 2:39 pm | Permalink
now microsoft provide their own tool to create a bootable usb drive to install windows
vista/7/2008/2008-R2
32 bit and 64 bit. This method works on both vista and win7. either 32 bit or 64 bit.
now because 64 bit capacity is more than 32 installation CD or DVD.
I have 16 GB card. On this card i have
win 98
win me
win professional 2000
win server 2003
win NT networks
win xp ( all in 1 ) home, professional, media center edit
win vista (all in 1)
win 7 ( all in 1 ) 32 bit and 64 bit is only win 7. above rest os are only 32 bit…
I have installed too many times on different system different os what customer ask for it. via
using this memory card…..
simply booting and them select from the list what i need to install then after that setup for
that windows will run up…..and so go on….
waqas _ akash AT yahoo DOT com if some one need please send me personal email….
381. litesh
Posted May 13, 2010 at 10:22 pm | Permalink
tnx i like it
382. litesh
Posted May 13, 2010 at 11:10 pm | Permalink
sir after installing windows i got error on pendrive that window was unable to format nw ho
to format it into fat again.
385. setu
Posted May 24, 2010 at 3:12 pm | Permalink
May be I am in biggest trouble of my life with computer, I was following your steps without
knowing that my main backup data hdd (500gb) was attached and I follow all the steps till
the formatting ….where I realized I have formatted the wrong one..and if I don’t get my
data back I will be at zero….al my work and everything was in it n I don’t have a dvd back
up as well…..i know it’s stupid fuc’ed up situation ……any help will be life saver….please
pls…..get me out of this………..
386. admin
Posted May 24, 2010 at 6:36 pm | Permalink
@Setu
You can try EASEUS Data Recovery Wizard free edition to get back your data. I hope you
will get back your data.
387. anon
Posted May 28, 2010 at 1:41 pm | Permalink
After copying is complete, delete the file ‘ei.cfg’ to make all Windows varients available.
388. oxygen
Posted May 28, 2010 at 8:20 pm | Permalink
389. Matt
Posted May 29, 2010 at 5:51 am | Permalink
OMG, this works so well, thanks, i have tried so many other “guides” and they did work.
THANKS
390. Benjamin
Posted June 1, 2010 at 7:44 am | Permalink
To anyone else still having the error in DiskPart, you MUST right click the CMD shortcut
within your Accessories folder and select RUN AS ADMINISTRATOR.
391. Suneev
Posted June 1, 2010 at 11:35 am | Permalink
I put forward my warm thanks for the help this post provided me.
Thanks Again
Suneev
suneev.lpu@gmail.com
392. Michael
Posted June 1, 2010 at 1:27 pm | Permalink
I’ve used this guide before with success, but it’s not working this time. Every time I type in
“cd boot”, I get an error message stating “The system cannot find the path specified.” I’ve
already tried two computers and I get the same message. I also tried replicating the exact
steps I did the first time by using a virtual drive, but that isn’t working either. What’s
wrong?
393. azhk
Posted June 6, 2010 at 10:53 pm | Permalink
394. Robin
Posted June 7, 2010 at 10:43 pm | Permalink
After step 7 it shows an error stating “Could not map drive partitions to the associated
volume device objects: Access is denied”
Any idea how to solve this problem?
395. Peter
Posted June 8, 2010 at 12:16 am | Permalink
396. Dennis
Posted June 8, 2010 at 2:25 am | Permalink
397. somu
Posted June 8, 2010 at 4:05 pm | Permalink
In the step 5 you had mentioned “insert your Windows7/Vista DVD into the optical drive”
but what if i don’t have optical drive, i am unable to go further this step.
399. Thankful29l
Posted June 10, 2010 at 10:50 pm | Permalink
Thank you
400. ander
Posted June 16, 2010 at 7:23 am | Permalink
>
> CD BOOT and hit enter to see the below message.
6. At the prompt, switch to your DVD drive. For example, if your DVD drive is drive D,
type:
D:
401. Taleeno
Posted June 16, 2010 at 5:34 pm | Permalink
I did this the first time and it worked fine- But i copied the wrong version of Win7 which
had expired. Do i need to run command prompt again for the newer version or can i just
copy the files over from the new DVD and go straight away?
402. mezvix
Posted June 20, 2010 at 9:07 pm | Permalink
for windows xp users format usb with petousb tool you can get by googling around and
runbootsect as instructed , other wise boodsectis also available standalone on many websites
to make usbs bootable .it even supports making xp bootable usb
403. SATADRU
Posted June 21, 2010 at 11:12 am | Permalink
HEY GUYS JUST MOUNT THE WIN 7 ISO FILE IN DEMONS TOOL IN XP AND
INSTALL IT TO THE PARTITION U LIKE….THERE IS NO NEED TO USE ANY DVD
OR USB PENDRIVE…….ANY PROBLEM!! MAIL ME
satadruhalder@yahoo.co.in……..
404. joseph
Posted June 24, 2010 at 3:30 am | Permalink
405. Santhosh
Posted June 24, 2010 at 10:20 pm | Permalink
407. Brad
Posted June 26, 2010 at 9:21 am | Permalink
Just awesome. Very nicely done, easy to understand and exactly what I was after.
408. Raeef
Posted June 26, 2010 at 12:52 pm | Permalink
It worked perfectly.
410. Anurag
Posted June 26, 2010 at 7:06 pm | Permalink
Sir,
At present I am using Windows XP which I would like to replace by Windows 7. Please
help me to install Windows 7 on my computer.
Thanking you.
412. raksmey
Posted June 28, 2010 at 3:07 pm | Permalink
thank you post is very useful for me. but does it work?
413. Hudson
Posted June 29, 2010 at 6:52 pm | Permalink
I’m currently at the copying files to USB end stage. But for anyone who reads down here,
make sure to check that you’ve selected the right disk in stage 4, one way to do this is by
typing DETAIL DISK and hitting enter after the SELECT DISK 1 line, brings up a load of
details and a volume list at the bottom, with name, size etc, mine was Disk 4.
(Using a different guide I manage to format my D:, good thing I’ve got a server backup.
DON’T MAKE MY MISTAKE)
414. Venthan
Posted June 29, 2010 at 10:24 pm | Permalink
Hey,
415. nex
Posted July 1, 2010 at 2:28 pm | Permalink
hi,anyone can help in bios settings,how it is done to select pendrive ..i cannot do it although
i have new m/b and all above trick ..but i can’t detect my bootable drive…may i lack this
idea…help me out …..thanks
416. solem
Posted July 2, 2010 at 2:48 am | Permalink
I was a bit sceptical about this actually working. It just seemed too good to be true, this
being Windows and all. But it actually works.
Like mentioned earlier it’s not possible to run bootsect from 32-bit windows on a 64-bit
version.
Also, I had to run cmd as admin or else bootsect would complain about something I can’t
remember atm.
417. real1tyFTW
Posted July 4, 2010 at 2:21 pm | Permalink
OMG THANX !!!!!!!!! I HAD A MAJOR FKING ISSUE, ! AND BY JUST SAYING the
first 2 commands the SETUP started and i was good to go THX
ALLLLLOOOOOOOOOOOOOOOOOOOOT
i found this article helpful because recently i had problems with usb and booting. THANKS
419. Jibba
Posted July 6, 2010 at 2:15 pm | Permalink
Don’t know why everyone post hard guides with cmd promt. There is a program directly
from Microsoft to do that same thing in 3 clicks. It also works on pirate/cracked copy of
windows 7 .
420. twe
Posted July 9, 2010 at 1:14 am | Permalink
Thank you so much for this tutorial. It was easy and helped things run much more smoothly.
What a relief!
421. Jan
Posted July 10, 2010 at 12:15 pm | Permalink
This guide didnt work for me. When I try to boot the USB drive it just says “invalid
partition table” and halts.
422. Jan
Posted July 10, 2010 at 12:27 pm | Permalink
I fixed it, it didnt have anything to do with this guide. If you get the error “invalid partition
table” try configuring your usb drive to load as hddd and not removable/fdd.
423. Fane
Posted July 13, 2010 at 5:20 pm | Permalink
424. Kumar
Posted July 16, 2010 at 1:06 pm | Permalink
There is always an easy way, download the tool from windows website and vollla sit back
and relax it will do everything for you !!!
http://store.microsoft.com/Help/ISO-Tool
425. Igre
Posted July 24, 2010 at 8:34 pm | Permalink
426. LT
Posted July 25, 2010 at 4:00 am | Permalink
I just had to tell you this was so easy, even for a non-techie like me, and by far the easiest
setup instructions on the web. I am installng Win 7 on my (6-yr old) son’s netbook as we
speak 7 he is so impressed!
427. bat787
Posted July 29, 2010 at 10:10 am | Permalink
428. Johnny
Posted July 29, 2010 at 10:23 pm | Permalink
To get this working in XP just use a Windows 7 virtual machine. Virtual Box is easy
enough.
PS. Not sure if it has been said, but not looking through all the comments lol
429. Kamesh
Posted July 31, 2010 at 2:13 pm | Permalink
I have a doubt in 5th step whr u say to insert Win 7 DVD…but if my cd-rom is not working
how can i insert DVD in tht place..my rom is not even opening if i press the button..then
what should i do??
430. Kayes
Posted July 31, 2010 at 5:32 pm | Permalink
This is really cool man, buy 1 thing in the step 7 when i type BOOTSECT.EXE /NT60 H: it
was not working but next time when i tried it was working.
Any way thanks for the real tutorial. I hope i will see more useful tutorial soon.
Thanks! 100% Working for me. Well, before I was able to install Ubuntu only.
432. Ghost
Posted August 4, 2010 at 10:54 am | Permalink
ThanX allot to whoever brain is behind all this…. Works 110% clean & safe install. No
problems faced. Follow the steps as written
433. Cristian C.
Posted August 6, 2010 at 5:26 pm | Permalink
Thank you!!!
Your tutorial is excelent!
Simple, safe and easy to follow.
434. Adlantis
Posted August 7, 2010 at 5:45 pm | Permalink
435. Maneksh.V.Thomas
Posted August 7, 2010 at 5:50 pm | Permalink
436. SHAILENDRA
Posted August 8, 2010 at 5:20 pm | Permalink
437. Michelle
Posted August 9, 2010 at 8:02 am | Permalink
438. junex
Posted August 9, 2010 at 11:15 am | Permalink
439. avaton
Posted August 10, 2010 at 12:37 am | Permalink
excellent work m8
440. Steve
Posted August 12, 2010 at 4:19 am | Permalink
what a legend!! I was completely lost and you have saved me – worked a treat.
Many thanks -
441. Mack
Posted August 12, 2010 at 8:43 am | Permalink
Everything worked fine down to copy the files from the DVD to the USB. I get a ‘Can’t
read from the source file or disk. bootsect.exe.mui’
442. adel
Posted August 13, 2010 at 12:38 am | Permalink
443. AJ
Posted August 13, 2010 at 8:04 am | Permalink
What a guide, 101% working. People still leaving comments every day after one year. One
of the best guides ever if you ask me! THANK YOU, you deserve it!
444. Smithy
Posted August 13, 2010 at 2:42 pm | Permalink
Jesus, how many times has the guy got to say it. ITS FOR WINDOWS VISTA AND 7 NOT
XP . Bunch of retards!
445. NLkiwi
Posted August 15, 2010 at 11:43 pm | Permalink
Followed instructions and worked great, no issues. Created a Win7x64 usb install from a
Win7x64 machine. Install was for a HTPC with no optical drive.
446. odotan
Posted August 16, 2010 at 11:52 am | Permalink
http://store.microsoft.com/help/iso-tool
447. Tammi
Posted August 17, 2010 at 2:21 am | Permalink
I had an error, when I tried to format, that said Virtual Disk service error: the file system is
incompatible. I fixed it by using quick format instead. Use this command
448. rakesh
Posted August 17, 2010 at 12:35 pm | Permalink
by the way I’m using MSI P55-GD65 motherboard and transcend 4GB USB drive.
is it my board or the usb drive….A Read Error…
please help
449. Rahul
Posted August 17, 2010 at 6:41 pm | Permalink
This method will not work if you are running on Windows Xp.The best alternative will be
to use either use either the microsoft method or try to use softwares like WintoFlash to
automate it for you.
450. Abdullah
Posted August 17, 2010 at 8:57 pm | Permalink
This method worked for me 100%, i am installing right now from a 8GB USB. Thanks a
lot !!!!!
451. Corey j
Posted August 18, 2010 at 3:13 am | Permalink
Also if you are making the usb disk from a 32 bit machine and your having problems,
saying incompatable stuff, than go to a machine which is 64 bit, and do it over
452. LAP87
Posted August 18, 2010 at 11:15 am | Permalink
Windows 7 USB/DVD Tool , takes your ISO and makes a bootable USB Drive or DVD.
Works under Xp/Vista.
http://store.microsoft.com/help/iso-tool
453. Johnsin
Posted August 18, 2010 at 7:58 pm | Permalink
Wow this was so Educational… I tried to do it with both x64 and x32 and there it was on
my EHDD! Cool Guide! Thanks man
454. Hesus
Posted August 18, 2010 at 11:40 pm | Permalink
Pardon me but this is pretty useless. If i had a windows dvd why da hell would i need to
boot from usb? The only reason i wanted to boot from usb was to not waste time on going
out of the house and buying a new dvd. Instead i wasted my time on this.
455. Frankie
Posted August 19, 2010 at 4:10 am | Permalink
When you said insert the Windows Vista/Windows 7 disk, did you mean insert a blank disc
or the disc that already has the software on it?(The $100 disc from store that comes in the
software box)
Thanks
456. DRBDANISH
Posted August 19, 2010 at 5:17 am | Permalink
457. admin
Posted August 19, 2010 at 9:20 am | Permalink
Frankie, put the disc that has Windows 7 on it. Good luck!
458. Roxy
Posted August 19, 2010 at 12:48 pm | Permalink
I followed this guide but when booting up i have an error message ‘A disk read error’
459. Litlis
Posted August 19, 2010 at 2:07 pm | Permalink
I do all the steps but on step 7 then i write “bootsect.exe /nt60″ he write this:
This version of G:\boot\bootsect.exe is not compatible with the version of Windo
ws you’re running. Check your computer’s system information to see whether you n
eed a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the
software publisher.
then what should i do??
461. Valdez
Posted August 19, 2010 at 6:01 pm | Permalink
462. admin
Posted August 19, 2010 at 7:47 pm | Permalink
463. tavu
Posted August 20, 2010 at 12:26 am | Permalink
I can’t copy the autorun file from the Windows DVD to the USB stick. It says I need to
provide an administrator to copy to that folder. Everything else is copied, just the autorun
has this problem. What can I do?
Thank You.
464. puneet
Posted August 22, 2010 at 2:01 pm | Permalink
I want to know the detail steps on how you can repair window operating system.
Thanks
Also i want some things on Virtual LAN, the problems and prospects of it.
467. miss26
Posted August 23, 2010 at 3:35 pm | Permalink
hi, have a problem in step 6..my dvd drive is E, and my usb is G……
E: CD BOOT
E:\boot>bootsect.exe /nt60 G:
Target volume will be updated with BOOTMGR compatible bootcode.
Could not map drive partitions to the associated volume device objects:
Access is denied.
468. Uwais
Posted August 24, 2010 at 7:21 am | Permalink
hi
i am using this method to install snow lepoard on a previously windows machine will it
work??
btw my snow lepoard image is on my comps HD so i cant complete step 5 onwards?? what
do i do??
also is there anyway of reversing this procedure after i haveinstalled the OS so i can use the
HD as a mass storage device after??
thanks
469. john
Posted August 24, 2010 at 7:25 am | Permalink
hi am i able to use this method to install MAC OS snow lepoard. i have no disk just
the .DMG file so i cant complete step 5 onwards. will it still work??
also am i able to reverse the effects on my external HD so i can use it as a mass storage
device after??
thanks
470. admin
Posted August 24, 2010 at 8:48 am | Permalink
@ John
Sorry, I have no idea about Mac OS.
471. DANNY
Posted August 24, 2010 at 9:42 pm | Permalink
Thanks man this is by far the best and accurate tutorial for making a win7/vista bootable
usb…
472. DANNY
Posted August 24, 2010 at 9:47 pm | Permalink
473. Dave D.
Posted August 25, 2010 at 7:23 am | Permalink
Hey, I tried it and works perfectly, thanks a lot…i’ve tried other guides with no success but
your guide is fantastic…keep up the good work…this world needs more helpful people like
you.
474. RAZON
Posted August 25, 2010 at 12:38 pm | Permalink
475. Fi156
Posted August 25, 2010 at 3:21 pm | Permalink
Nice How To, but the command: format fs=ntfs needs HOURS not minutes…
477. Madhav
Posted August 27, 2010 at 1:01 pm | Permalink
@Fi156 better use format fs=ntfs quick This will take you a few seconds. that command
without quick will take long time because it performs a complete format. thanks
478. KOUSHIK
actually i have a another problem .i have a pen drive but its don’t show its original memory
and it is not to be formatted .this pen drive is 8 gb but showing 69mb.if you give me a
suggestion that how i am recover from this problem so iam glad ti you.
479. Richard
Posted August 28, 2010 at 11:16 am | Permalink
You rock man! Thanks for this guide. I’ve spent two whole days trying to repair my corrupt
Windows 7 installation on my Netbook, which has been a challenge as it has no optical
drive, so having a bootable Flash Drive was the perfect answer. Thanks again!
480. Anku
Posted August 28, 2010 at 9:51 pm | Permalink
481. Cheryl
Posted August 29, 2010 at 10:39 pm | Permalink
I have done this – what method of copying files from cd to usb is best, I Right clicked
copyed then right clicked and pasted. When I tried to boot up I got BOOTMGR.exe missing
and it wouldnt boot up. Am I doing something wrong?
482. Amp
Posted August 30, 2010 at 10:27 am | Permalink
483. zero
Posted August 30, 2010 at 9:22 pm | Permalink
i’ve already try your method, but i have a problem here which is, after my computer restart
to finish the installation, it came back for the begiining to format my computer and not
proceed for the “completing installation”…how to overcome this problem?please help me…
484. Ed
Posted August 31, 2010 at 3:46 am | Permalink
If you are using Windows XP to create your bootable USB, these steps worked for me. I just
omitted steps 1-5
Open and find your USB drive and format using NTFS
CD boot
7. Now copy all files from drive where you have mount Windows 7 iso
8. Now reboot your computer and press F9 to get your BIOS screen and select USB drive as
your boot drive.
9. If every thing goes fine, Your Windows 7 Installation should start from your USB drive
485. GEORGE
Posted August 31, 2010 at 6:01 am | Permalink
486. zero
Posted August 31, 2010 at 6:50 am | Permalink
i’ve already try your method, but i have a problem here which is, after my computer restart
to finish the installation, it came back for the begining to format my computer and not
proceed for the “completing installation”…how to overcome this problem?please help me…
hello..
Thank you so much..
i’m iranian..
my laptop have not DVD Rom..
I want you to tell Persian: ???? ?????..
????? ??? ???? : Thanks really
488. gaithat
Posted September 1, 2010 at 8:06 pm | Permalink
Windows Xp does not recognize removable drive under: LIST DISK segment.
489. bulger
Posted September 2, 2010 at 6:12 pm | Permalink
Does not work on my vista laptop….. tried several times now keep getting
“‘BOOTSECT.EXE’ is not recognized as an internal or external command, operable
program or batch file,” Thanks to the author as I have used this for Windows 7 previously
and it worked fine but any help with vista install would be appreciated!
490. I8bnsober
Posted September 4, 2010 at 2:35 am | Permalink
Worked great for me except the clean command run as (admin) gives me an access denied
on v*sta and w*n7 but I skip this step and even use the same window to perform the
partitioning and the bootsect, worked great on both.
Thanks.
for those whos stuck at step 7 coz Could not map drive partitions to the associated volume
device objects:
Access is denied. run cmd as administrator that would do the trick
492. bziz
Posted September 5, 2010 at 9:13 pm | Permalink
problem with could not map … access denied but here is the solution:
you have to go into run and go into cmd. then you have to minimise it and on your taskbar
right-click the icon for cmd and also right-click on command prompt then click on run as
administrator
493. Darky
Posted September 5, 2010 at 11:19 pm | Permalink
Hey…Can i install windows 7 with usb * i dont have dvd reader atm * if i dont have a
windows before it..Like my old windows crashed & now am without windows at all & i
wanna install windows 7 & no dvd reader ,thx alot
494. TechNazgul
Posted September 6, 2010 at 12:49 am | Permalink
Just wanted to say thanks for posting this. Worked like a charm for me with Windows 7
Ultimate x86 installing to an Acer Revo 1600 (which I’m using to test out the new XBMC
beta release of Dharma).
496. IceaTronic
Posted September 6, 2010 at 10:42 pm | Permalink
Pro Tip:
Takes about 30 seconds to format the drive. Incredibly handy if your USB stick is 8GB+
like all of mine are. I dont want to wait 20 minutes for it to format…
497. thedeamon
Posted September 8, 2010 at 1:14 pm | Permalink
Copy it from a Vista DVD if you want to include it on the USB root directory.
bootsect.exe /nt52 H:
I would suggest try to format the USB key as FAT & then install the boot manager followed
b dumping of the XP CD to start testing.
If NTFS on key works, it will also mean a super fast Windows install over USB 2.0.
Catch: ensure to use correct bootsect.exe for x86 & x64 OS.
498. Azmi
Posted September 9, 2010 at 4:55 am | Permalink
Hey!
I don’t know how you saved my life. I shall thank you for thousand times for this and once
more thousand times for your efforts on this. It really worked. Thank man, appreciate it…
499. deeh
Posted September 9, 2010 at 8:13 am | Permalink
500. Andy
Posted September 9, 2010 at 5:02 pm | Permalink
Thank you so much! It’s so simple and yet I could not manage to install Windows from
USB. Now it finally worked! Thanks!
501. Ricky
Posted September 10, 2010 at 10:05 pm | Permalink
Worked well for me, the only thing is I had to pull the drive out during the first reboot or the
install would start all over again.
HI.
This is Gagan from http://www.softwaresgiant.com and do you know that you have really
helped me a lot?I had original windows 7 ultimate 32-bit DVD but it sisnot run on my PC as
I had no DVD player.So I made this bootable HD and am enjoying 7 because of you.
Thanks
503. Rets
Posted September 12, 2010 at 6:47 am | Permalink
I did steps 1 to 4. My usb was plugged and so was my 500GB external hdd. It was too late
when I realized that I did step 4 on my external hdd. Now, I cant open my external hdd – it
always says your drive needs to be formatted. Please help =<
504. mary
Posted September 12, 2010 at 4:53 pm | Permalink
505. matthew
Posted September 13, 2010 at 1:40 am | Permalink
can i just say if u are using a bigger hard-drive eg a 250g external it takes about 1-2 hours to
format to ntfs
506. nando
Posted September 13, 2010 at 2:28 am | Permalink
THANK YOU!! this guide is awesome. worked without any problems.. and the speed of
install increased! now it installs about 5x faster.. it used to take 1 hour. now it took 20
minutes :O!!! thanks!
507. MightyAL
Posted September 13, 2010 at 3:53 pm | Permalink
2) Can installing windows wit the help of pen drive be apply on any computer capacity?
510. mikaboshi
Posted September 15, 2010 at 1:41 am | Permalink
I had the official ms tool to make your usb installer disk, but somehow it always ended up
telling me it couldnt copy the files to my usb drive. Doing it manually worked like a charm!
511. Shen
Posted September 15, 2010 at 5:52 am | Permalink
When I followed this method, I manage to get the OS to boot from the USB, but then that
creates another problem. Vista confuses itself by reading the USB as another hard drive.
The error “Windows is unable to find a system volume that meets its criteria for
installation.” shows up in the Disk Partition page. My computer only has one hard drive so
it must be the USB causing the problem. Can anyone tell me how to get around this
problem?
512. ICHI
Posted September 15, 2010 at 1:38 pm | Permalink
513. FrackMicrosoft
Posted September 16, 2010 at 12:03 am | Permalink
This will work on non-vista computers if you use an external hard drive and skip the format
command.
amazing… this guide really worked!!! plus you don’t need to use any programs.. /heh
515. DANNY
Posted September 16, 2010 at 8:02 pm | Permalink
Diskpart has encountered an error;access is denied .see the system event log for more
information
no usable free extent could be found.it may be that their is insufficient free space to creat a
partition at the specified size and offset.specify differant size and offset values or dont
specify either to creat the maximum
sized partition.it may be that the disk is using the mbr disk,,,partitioning format and the disk
contains either 4 primary partitions,no more partitions may be created,,or 3 primary
partitions and one extended partition ,only one logical drives may be created,,if you can
help thanks
516. Ryan
Posted September 17, 2010 at 12:02 pm | Permalink
Is it just me or does it take more than just a few seconds to format the selected drive????
517. Ryan
Posted September 17, 2010 at 12:03 pm | Permalink
Great write up!! this really helped me out and btw this can work on non-vista computers if
you use an external hard drive
519. rohit
Posted September 17, 2010 at 1:44 pm | Permalink
520. saif
Posted September 18, 2010 at 3:22 am | Permalink
hi i m using win xp above all steps done n my bios have option usb hdd but i its not booting
plz help
521. Nith
Posted September 19, 2010 at 4:14 pm | Permalink
523. Bane
Posted September 19, 2010 at 7:04 pm | Permalink
hey, the guide is dreat but like some ppl here I have the “missing bootmgr” problem, You
sad fix it… but… how ??? please help me , I am trying to set win 7 on HP notebook wich
has vista, and your steps I^ve done on other PC wich has win 7 on it,because dvd rom on
notebook doesnt work. my USB drive is external HDD 1Tb.. folowed all steps one by one,
then attached ext hdd on notebook and set booting from USB… still have msg missing
bootmgr….
heeeeeeelp! thx!
524. darkan9el
Posted September 19, 2010 at 8:09 pm | Permalink
Awesome tut, just got windows 7 32bit on my nieces Acer Aspire One, straight on
everything installed. I’d say 10-20mins faster too than conventional DVD installs.
Pressed F2 on boot to get into setup, Acer Aspire will see the USB and show it by name, I
just moved it to the top of the Boot list using F6 saved changes and rebooted. Once W7 has
installed you have to go back into setup (F2) to change the boot sequence back to the HDD.
Just finished updating. If only life was this simple’s lol!
525. justme!
Posted September 21, 2010 at 3:42 am | Permalink
look’s like a nice method but! how do i ‘reverse’ the disk-on-key properties to it’s defaults,i
mean in this whole procedure you actually change the file system of the disk-on-key and
some other properties,how to reverse all that?
526. Sudheera
Posted September 22, 2010 at 2:16 pm | Permalink
527. Tom
Posted September 23, 2010 at 2:49 am | Permalink
Hey, Thanks! great guide. I even got it to work using Windows XP!
Tom
528. geoff
Posted September 24, 2010 at 4:59 pm | Permalink
when you say copy ALL the files, does that mean hidden and system files contained within
the CD? do you recommend drag/drop copy or a CMD Copy?
what if the windows 7 copy isn’t on a dvd but has been downloaded iso?
530. kevin
Posted September 25, 2010 at 5:59 am | Permalink
Actually /active= should have 0 (most of the time) it’s the partition number OF the drive (0
as it’s formatted) otherwise you’ll get “invalid parameter…”.
531. are_peace22
Posted September 26, 2010 at 10:12 am | Permalink
532. unification
Posted September 26, 2010 at 1:37 pm | Permalink
533. Lucas
Posted September 27, 2010 at 10:13 am | Permalink
534. unification
Posted September 27, 2010 at 7:57 pm | Permalink
535. unification
Posted September 28, 2010 at 4:54 am | Permalink
536. marcus
Posted September 28, 2010 at 6:28 am | Permalink
i cant do the “clean” bit. error occured, unable to access. help pweez
537. jainil
Posted September 28, 2010 at 8:54 am | Permalink
thanx for the tips but i am getting a message saying could not map drive partition to the
associated volume device objects: acces is denied on step 7 can you help?
539. ehsan
Posted September 29, 2010 at 4:14 pm | Permalink
540. Prithviraj
Posted September 29, 2010 at 4:34 pm | Permalink
Thanks a lot . Worked like a charm, very detailed and precise. Great job keep it up
Great step by step instructions. Even though I’ve done this dozens of times, it’s great to
have a site I can trust to refer to when my (poor) memory fails me.
Thanks!
Dave Sanders
Microsoft MVP
542. Peyman
Posted September 29, 2010 at 7:59 pm | Permalink
543. admin
Posted September 29, 2010 at 8:00 pm | Permalink
544. Justin A
Posted October 1, 2010 at 10:59 am | Permalink
Beautiful! Flawless! Stupid sata DVD died and with no replacement and no time to spare
this worked perfectly. Make sure drive is emptied as he states. Make sure! Otherwise,
awesome. Thank yooouu.
i have a question that before reading this tutorial or finding it i bought a 2gb pen drive and i
think this procedure does not work with 2 gb pen drive or does it?
546. Donna
Posted October 2, 2010 at 10:02 am | Permalink
WOW – Thanks a lot. It worked like a charm. I really appreciate your help. Keep up the
good work. It is people like you that make the world a better place.
Thank agian
547. Donna
Posted October 2, 2010 at 10:06 am | Permalink
Thanks again
549. Trevor
Posted October 4, 2010 at 12:56 am | Permalink
Why not just copy all the files from the installation image to your drive, and have bootmgr
ran from there instead?
This thread is getting long, but it is only fair to say thank you for this great guide. Thanks a
lot.
552. AJIT
Posted October 4, 2010 at 12:34 pm | Permalink
553. Modeste
Posted October 4, 2010 at 9:22 pm | Permalink
554. Ankit
Posted October 5, 2010 at 1:27 am | Permalink
i am using win7 32 bit. can i use bootsect to create a bootable USB to install win7 64 bit? i
have the ISO file for win7 64 bit, but have no clue how to get it to work.
555. Anggi
Posted October 5, 2010 at 9:55 am | Permalink
556. Mark
Posted October 6, 2010 at 10:30 am | Permalink
Thanks for the superb guide! I was able to get all the way to the final command with no
problems. I am running Windows 7 Ultimate edition (Custumized Nvidia edition) in 64 bit
mode. I get the following message when I try to enter the BOOTSECT.EXE /NT60 H:
command:
557. Mark
Posted October 6, 2010 at 10:38 am | Permalink
Please disregard my previous post….I forgot the CD BOOT command before attempting it.
I have successfully updated the USB stick with the bootcode.
Again:
558. Doug
Posted October 7, 2010 at 3:24 am | Permalink
file : \Boot\BCD
status : 0xc000000e
info : An error occurred while attempting to read the boot configuration
559. unification
Posted October 7, 2010 at 5:09 am | Permalink
560. JB
Posted October 9, 2010 at 1:47 am | Permalink
Since I’m trying to make a LiveCD bootable through USB, it’s not a normal official
Windows 7 CD, and there is no BOOTSECT.EXE whatsoever, so I can’t make it
BOOTMGR Compatible. Any other solutions?
561. piyush
Posted October 9, 2010 at 10:12 pm | Permalink
my dvd write is not working.how can i do this step D: CD BOOT.pls mail me ans.
562. Nishant
Posted October 10, 2010 at 12:26 am | Permalink
563. Sandeep
Posted October 11, 2010 at 5:30 pm | Permalink
@nishant-this process only creates the way by which u can boot the setup progress with the
pendrive…comparatively faster than cd or dvds….the problem you are facing is due to
wrong installation files
564. Kir
Posted October 11, 2010 at 6:01 pm | Permalink
I’m Russian, but I didn’t find any working instruction for my problem on russian lanquage.
This quide helps me to install Win7 Starter on my netbook using USB HDD.
565. Leo
Posted October 12, 2010 at 1:13 am | Permalink
566. Sam
Posted October 12, 2010 at 6:05 pm | Permalink
This worked fabulously. Thanks for the easy to follow instructions! I had been looking for
this solution for a long time.
567. Ionut
Posted October 13, 2010 at 1:34 am | Permalink
Thanks a lot.
Worked perfectly!
You really should put a link to the MS USB/DVD tool more prominently on your site, why
bother with this complicated method?
http://store.microsoft.com/help/iso-tool
570. Andres Au
Posted October 16, 2010 at 6:20 am | Permalink
You can also check the drive number designation in the device manager under “disk
management” if you have trouble selecting the appropriate disk as described in step four of
this guide.
571. pempoy
Posted October 16, 2010 at 12:36 pm | Permalink
572. KB
Posted October 16, 2010 at 9:36 pm | Permalink
THanks for the insight, I was going crazy trying to get this to work. A lot of sights miss the
part about this only working in Vista/7!
573. JACK91
Posted October 16, 2010 at 10:46 pm | Permalink
574. Crypdan
Posted October 17, 2010 at 3:30 am | Permalink
When you say copy windows 7 contents, you mean the documents or a iso file?
575. haroldcore
Posted October 17, 2010 at 9:48 am | Permalink
what if i dont have a win7 disc? what if i just have an ISO but not on a cd. because i have an
ISO on my downloads.
576. AJ
Posted October 18, 2010 at 10:53 pm | Permalink
577. dvhirst
Posted October 19, 2010 at 4:47 am | Permalink
Well, it worked as advertised (Windows7), but only after going to Control Panel – User
Account Control Settings and specifying “Never notify”. Before taking this step, the
Bootsect command failed with “Access denied”.
Thanks!
578. KGB1953
Posted October 19, 2010 at 1:19 pm | Permalink
579. KGB1953
Posted October 19, 2010 at 1:22 pm | Permalink
If you have an .iso file just mount it with magiciso. Google it.
580. c0de
Posted October 19, 2010 at 11:58 pm | Permalink
581. Jaimie
Posted October 21, 2010 at 7:08 am | Permalink
Additional info:
1.) during the diskpart in command prompt, users need to cancel or ignore any prompts by
windows to automatically format the drive.
2.) If you get the message from command prompt when coppying the boot info that the
device is currently locked, it’s probably either your antivirus trying to scan the empty drive,
or it’s windows that has automatically opened the drive contents in a window. Stopping the
antivirus or any open windows other than commandprompt associated with the USB or
external drive and trying again from where it said “device locked” works.
Thanks for a brilliant post. Saved me hours. I’m setting up a PC with old DVD drives and
three have failed! Saved me getting a new DVD drive!
582. Samuel
Posted October 23, 2010 at 6:31 am | Permalink
PLEASE HELP!
make it work
584. chielt
Posted October 25, 2010 at 4:52 am | Permalink
I have a 4GB usb pendrive. When I try to do ‘CREATE PARTITION PRIMARY’ it tells
me the drive isn’t big enough te create a partition without extra parameters. Please advise.
585. nikhil
Posted October 25, 2010 at 10:54 am | Permalink
586. Albert
Posted October 25, 2010 at 11:10 am | Permalink
hey, i keep getting “… invalid ms-dos command” when copying the disk content in step 8.
587. Albert
Posted October 25, 2010 at 11:18 am | Permalink
588. shoab
Posted October 26, 2010 at 3:06 am | Permalink
sir pls tell me about how to create usb bootale for install windows xp-7 by usb device like
pen drive.
589. SATHISH
Posted October 29, 2010 at 7:11 pm | Permalink
ya its really nice to do but in between i got some error .. but i think that the inspections
given above are really gud .., the same time after i did some steps my usb drives crashed ,
after that i cant able to use d usb .., so please avoid stop in between.. thanks
590. SATHISH
Posted October 30, 2010 at 12:46 am | Permalink
Hey Sorry For My Previous Post .., I Tried once again these steps i finally got thanks
592. mukesh
Posted October 31, 2010 at 2:37 pm | Permalink
Great post..!! Followed all the instructions step by step and works like a charm..!!
The only tip is that this wont work for xp since in xp, the MS DOS disk manager does not
show usb disks. it will only show the HDD as disk 0. There is no disk 1. But when i tried
with vista, then it shows usb as disk 1 and all the steps worked easily.
594. Jeffrey
Posted November 1, 2010 at 6:03 pm | Permalink
595. SherwinQ
Posted November 4, 2010 at 10:03 am | Permalink
596. marshmallow
Posted November 5, 2010 at 8:45 am | Permalink
597. FilledVoid
Posted November 5, 2010 at 4:57 pm | Permalink
This worked perfectly for a system that I was fixing which had a broken DVD drive. The
method used was able to make my external drive bootable with Lenovos DVD image.
Thanks a ton.
598. Alex789045
Posted November 6, 2010 at 6:26 am | Permalink
599. Vash
Posted November 6, 2010 at 4:29 pm | Permalink
hey bro i’ve read all the instructions, i’ve never try it myself but on about the comments
above, it’s a kind of 99% of believing you!!!hope i could make it!!!thanks
Post a Comment
Your email is never published nor shared. Required fields are marked *
Name *
Email *
Website
Comment
Submit Comment
• Advertisement
• Categories
Select Category
• Downloads
◦ Nero 9 Free Full Version
• Pages
◦ About
◦ Contact Me
◦ Friends
◦ Privacy
Recent posts
55 Free Tweaking Applications For Windows 7
November 6, 2010
Blogroll
Windows 7 Center
Windows 7 News & Information
Windows Club
WinVistaClub
Copyright 2008-2010, All Rights Reserved by Into Windows| Theme by Daily Blog Tips