Professional Documents
Culture Documents
Description Features
Cummins Power Generation fully automatic battery Protection - All models include a 5 amp DC output
chargers - using switched mode power electronics - are breaker. A replaceable 5 amp AC fuse is provided for
constant voltage/constant current chargers incorporating input lead protection.
a 4-stage charging algorithm. Designed for use in Easy installation - Single pluggable connector.
applications where battery life and reliability is important;
User display - Output voltage and current, fault
these chargers are ideal for maintaining the battery bank
information and configuration options are indicated on
in transfer switch installations.
the alphanumeric display.
To achieve optimum battery life, a 4-stage charging cycle
Monitoring - An LED indicates the condition of the
is implemented. The four charging stages are trickle,
bulk, absorption and float. The trickle stage safely charger. Green indicates normal charging operation and
charges overly discharged batteries. It protects a red indicates a fault condition.
damaged or shorted battery from excessive current. Faults - The charger senses and annunciates the
During bulk charge a constant current is applied to following fault conditions: input overvoltage, input
quickly restore the maximum battery charge level in the undervoltage, AC power loss, battery overvoltage,
shortest amount of time. The absorption stage applies a battery undervoltage, charger circuitry overtemperature,
constant voltage to the battery to bring the battery to unrecoverable battery and overload/overcurrent.
100% capacity. The float stage tailors the constant Output relay - Output contacts are closed in a fault
voltage output to maintain the battery at full capacity condition. 250 VAC/30 VDC 2 amp contacts.
while serving DC operated loads. RFI/EMI and voltage surge resistant.
Battery chargers are field-configurable for charging either
12 or 24 VDC battery systems and for operation at 50 or
60 Hz. Output voltage selection is done through the
alphanumeric display.
©2007|Cummins Power Generation Inc.|All rights reserved|Specifications subject to change without notice|Cummins Power Generation
and Cummins are registered trademarks of Cummins Inc. “Our energy working for you.” is a trademark of Cummins Power Generation.
S-1493 (7/07) Page 1 of 2
Specifications
Performance and physical characteristics
Output: Nominal voltage 12 or 24 VDC
Float voltage 13.5 or 27.0 VDC
Output voltage regulation ±1%
Maximum output current 2 amp
Input: Voltage AC 120, 208, 240, 380, 416, 480, 600
Frequency 50 or 60 Hz