Professional Documents
Culture Documents
com --
527
Abrasives
528 abrasives • SURFACE GRINDING WHEELS
ullyd
46-I -062 $22.70 10 $19.41 Part No. Box Each
f
guarantee
46-J
46-K
60-I
-092
-122
-184
22.70
22.70
22.70
10
10
10
19.41
19.41
19.41
Grit
46-J
1-704-
-416
Each
$96.10
Quantity
4
Box Qty.
$82.17
GRADE/BOND SELECTION
AA is ideal for grinding heat sensitive General Conditions Normal Starting
steels, as well as easy- and medium-to- and Needs Grade Range Grade Bond
grind high-speed steels and cast, alloy Narrow contact area* or form holding K-L K VL, V40
steels. Use V40 bond for general pur- General surface grinding H-K J VL, V40
pose applications or medium contact Medium/Wide contact area*, cooler grind F-H H VL, V40P, VPP
areas. Use V40P and VPP bonds on wide
contact areas where heat is an issue.
* DEFINITIONS OF CONTACT AREA:
Narrow: The contact area of the grind is less than 25% of the wheel width, or less than 1/4" wide.
Medium: The contact area of the grind is 25% - 50% of the wheel width, or over 1/4" - 1/2" wide.
FEATURES: Wide: The contact area of the grind is greater than 50% of the wheel width, or over 1/2" wide.
• White Aluminum Oxide abrasive for fast stock
removal in light to medium stock removal operations. WHEEL SHAPES:
• Excellent friability creates cool cutting action.
• Durable, vitrified bond for long wheel life. TYPE 1: For Surface, Cylindrical and Tool & Cutter Grinders
• V40P bond: Induced porosity for load resistance.
TYPE 5: For Surface Grinders
7" x 1/4" x 1-1/4"* - TYPE 1 7" x 1" x 1-1/4" Recessed 1/S 3" x 1/2" - TYPE 5
Our Net Price Our Net Price
Grit Part No. Box Each Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty. Hardness Grade 1-632- Each Quantity Box Qty.
60-I AA60-IV40 -09878 $20.69 10 $17.69 46-I AA46-KV40 -09798 $39.19 5 $33.51
60-K AA60-KV40 -09874 20.60 10 17.61
100-K AA100-KV40 -27714 20.60 10 17.61
120-J AA120-JV40 -62176 20.60 10 17.61
150-K AA150-KV40 -09866 36.10 10 30.87
150-L AA150-LV40 -62177 36.10 10 30.87 8" x 1/4" x 1-1/4" - TYPE 1
Our Net Price
Grit Part No. Box Each
7" x 1/2" x 1-1/4" - TYPE 1 Hardness Grade 1-632- Each Quantity Box Qty.
Our Net Price 80-J AA80-JV40 -09844 $24.10 5 $20.61
Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty.
46-H AA46-HV40 -09865 $25.65 5 $21.93
46-I AA46-IV40 -09864 25.65 5 21.93 8" x 1/2" x 1-1/4" - TYPE 1
46-J AA46-JV40 -09863 25.65 5 21.93
5 21.93 Our Net Price
60-I AA60-IV40 -09860 25.65
60-J AA60-JV40 -09859 25.65 5 21.93 Grit Part No. Box Each
5 21.93 Hardness Grade 1-632- Each Quantity Box Qty.
60-K AA60-KV40 -09858 25.65
80-K AA80-KV40 -09854 25.65 5 21.93 46-H Porous* AA46-HV40P -05740 $28.21 5 $24.12
120-K AA120-KV40 -62180 25.65 5 21.93 46-J AA46-JV40 -09839 30.80 5 26.33
60-I AA60-IV40 -09836 30.80 5 26.33
60-J AA60-JV40 -62190 30.80 5 26.33
80-J* AA80-JV40 -27716 30.80 5 26.33
7" x 3/4" x 1-1/4" - TYPE 1
Our Net Price
Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty.
12" x 1" x 5"* - TYPE 1
60-I AA60-IV40 -09848 $30.80 5 $26.33
Our Net Price
Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty.
* WHILE SUPPLIES LAST. 46-I AA46-IV40 -01900 $90.90 2 $77.72
Ruby Surface
Grinding Wheels f ullyd
guarantee
SIMONDS STYLE
7" x 1/2" x 1-1/4"
Our Net Price
Part No. Box Each
For High Speed & Grit 1-705- Each Quantity Box Qty.
High Chrome Steels
46-J/K -005 $14.20 10 $12.14
60-J/K -010 14.20 10 12.14
7" x 1" x 1-1/4" - 3,760 RPM - Recess One Side 3" x 1/2"
12" x 1" x 3" - 2,220 RPM 14" x 2" x 5" - 1,640 RPM
Our Net Price - Recess Two Sides 8" x 3/8"
Our Net Price
Part No. Box Each
Grit 1-595- Each Quantity Box Qty. Part No. Box Each Part No. Our Net
Grit 1-595- Each Quantity Box Qty. Grit 1-595- Price/Ea.
46-H -58016 $22.45 10 $19.19
46-J -58017 22.45 10 19.19 46-H -58033 $56.30 2 $48.14 46-I -58046 $156.30
60-J -58018 22.45 10 19.19 46-J -58034 56.30 2 48.14 46-J -58047 156.30
7" x 1/4" x 1-1/4" - 3,760 RPM 8" x 1" x 1-1/4" - 3,600 RPM - Recess One Side 3" x 1/4" 14" x 1" x 3" - 1,773 RPM
Our Net Price Our Net Price Our Net Price
Part No. Box Each Part No. Box Each Part No. Box Each
Grit 1-595- Each Quantity Box Qty. Grit 1-595- Each Quantity Box Qty. Grit 1-595- Each Quantity Box Qty.
60-I -34308 $10.20 10 $8.72 46-H -34366 $26.40 5 $22.57 46-I -34445 $94.95 2 $81.18
60-J -34309 10.20 10 8.72 46-J -34367 26.40 5 22.57
60-K -34310 10.20 10 8.72 60-J -34369 26.40 5 22.57
80-K -34313 10.20 10 8.72
100-K -34315 10.20 10 8.72 14" x 1" x 5" - 1,173 RPM
150-K -34317 10.20 10 8.72 Our Net Price
10" x 1" x 3" - 2,483 RPM Part No. Box Each
7" x 1/2" x 1-1/4" - 3,760 RPM Our Net Price Grit 1-595- Each Quantity Box Qty.
Our Net Price Part No. Box Each 46-H -34447 $89.60 2 $76.61
Part No. Box Each Grit 1-595- Each Quantity Box Qty. 46-I -34448 89.60 2 76.61
Grit 1-595- Each Quantity Box Qty. 46-H -34389 $39.65 5 $33.90 46-J -34449 89.60 2 76.61
46-H -34318 $12.95 10 $11.07 46-I -34390 39.65 5 33.90 60-J -34453 89.60 2 76.61
46-I -34319 12.95 10 11.07 46-J -34391 39.65 5 33.90 60-K -34454 89.60 2 76.61
46-J -34320 12.95 10 11.07 46-K -34392 39.65 5 33.90
46-K -34321 12.95 10 11.07
60-H -34323 12.95 10 11.07 12" x 1" x 3" - 2,200 RPM 14" x 1-1/2" x 5" - 1,173 RPM
60-I -34324 12.95 10 11.07 Our Net Price Our Net Price
60-J -34325 12.95 10 11.07 Part No. Box Each Part No. Box Each
60-K -34326 12.95 10 11.07 Grit 1-595- Each Quantity Box Qty. Grit 1-595- Each Quantity Box Qty.
60-L -34327 12.95 10 11.07
80-H -34328 12.95 10 11.07 46-H -34411 $54.70 2 $46.77 46-H -34456 $120.15 2 $102.73
80-K -34329 12.95 10 11.07 46-I -34412 54.70 2 46.77 46-I -34457 120.15 2 102.73
100-K -34330 12.95 10 11.07 46-J -34413 54.70 2 46.77 46-J -34458 120.15 2 102.73
46-K -34414 54.70 2 46.77 46-K -34459 120.15 2 102.73
60-I -34416 54.70 2 46.77 60-J -34462 120.15 2 102.73
7" x 3/4" x 1-1/4" - 3,760 RPM - Recess One Side 3" x 1/4"
60-K -34418 54.70 2 46.77
Our Net Price
Part No. Box Each 12" x 1" x 5" - 2,200 RPM 14" x 1-1/2" x 5" - 1,773 RPM - Recess One Side 8" x 1/2"
Grit 1-595- Each Quantity Box Qty.
Our Net Price Our Net Price
46-H -34335 $18.20 10 $15.56
Part No. Box Each Part No. Box Each
46-I -34336 18.20 10 15.56 Grit 1-595- Each Quantity Box Qty. Grit 1-595- Each Quantity Box Qty.
46-J -34337 18.20 10 15.56
46-K -34338 18.20 10 15.56 46-H -34419 $54.70 2 $46.77 46-H -34464 $120.15 2 $102.73
60-J -34341 18.20 10 15.56 46-J -34421 54.70 2 46.77 46-I -34465 120.15 2 102.73
46-K -34422 54.70 2 46.77 46-J -34466 120.15 2 102.73
60-J -34425 54.70 2 46.77 60-I -34469 120.15 2 102.73
7" x 1" x 1-1/4" - 3,760 RPM - Recess One Side 3" x 1/2" 60-K -34426 54.70 2 46.77 60-J -34470 120.15 2 102.73
Our Net Price
Part No. Box Each 12" x 1-1/2" x 5" - 2,200 RPM - Recess One Side 7-1/2" x 1/2"
Grit 1-595- Each Quantity Box Qty. Our Net Price 14" x 2" x 5" - 1,773 RPM
46-H -34342 $21.80 10 $18.64 Part No. Box Each
46-I -34343 21.80 10 18.64 Grit 1-595- Each Quantity Box Qty. Part No. Our Net
46-J -34344 21.80 10 18.64 Grit 1-595- Price/Ea.
46-H -34427 $84.90 2 $72.59
46-K -34345 21.80 10 18.64 46-J -34429 84.90 2 72.59 46-H -34472 $152.50
60-J -34348 21.80 10 18.64 46-K -34430 84.90 2 72.59 46-J -34474 152.50
8" x 1/2" x 1-1/4" - 3,600 RPM 60-I -34432 84.90 2 72.59
60-J -34433 84.90 2 72.59
Our Net Price
Part No. Box Each
14" x 2" x 5" - 1,773 RPM -
Grit 1-595- Each Quantity Box Qty. Recess One Side 8" x 1"
12" x 2" x 3" - 2,200 RPM -
46-H -34350 $17.15 10 $14.66 Recess Two Sides 6-1/2" x 1/2" Part No. Our Net
Grit 1-595- Price/Ea.
46-I -34351 17.15 10 14.66 Part No. Our Net
46-J -34352 17.15 10 14.66 Grit 1-595- Price/Ea. 46-H -34480 $152.50
46-K -34353 17.15 10 14.66 46-I -34434 $99.00 46-I -34481 152.50
60-H -34354 17.15 10 14.66 46-J -34482 152.50
60-I -34355 17.15 10 14.66 60-J -34486 152.50
60-J -34356 17.15 10 14.66 12" x 2" x 5" - 2,200 RPM - 60-K -34487 152.50
60-K -34357 17.15 10 14.66 Recess Two Side 7-1/2" x 1/2"
80-K -34358 17.15 10 14.66 Part No. Our Net
Grit 1-595- Price/Ea. 14" x 2" x 5" - 1,773 RPM -
8" x 3/4" x 1-1/4" - 3,600 RPM
46-H -34436 $99.00 Recess Two Sides 8" x 3/8"
Our Net Price
46-I -34437 99.00 Part No. Our Net
Part No. Box Each 46-J -34438 99.00
Grit 1-595- Each Quantity Box Qty. Grit 1-595- Price/Ea.
60-I -34441 99.00
46-H -34359 $23.65 10 $20.22 46-I -34488 $152.50
46-J -34360 23.65 10 20.22 46-J -34489 152.50
7" x 1" x 1-1/4" - Recessed 1/S 2-3/4" x 1/2" - TYPE 5 14" x 1-1/2" x 5" - TYPE 1
Our Net Price Grit Part No. Our
Hardness Grade 1-632- Net Price
Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty. 46-H 32AR46-HV40 -27372 $220.83
46-H 32AR46-HV40 -27703 $43.88 5 $37.52 46-J 32AR46-JV40 -27700 227.32
46-I 32AR46-IV40 -27675 43.88 5 37.52
60-I 32AR60-IV40 -27704 43.88 5 37.52
14" x 2" x 5" - TYPE 1
Grit Part No. Our
8" x 1/4" x 1-1/4" - TYPE 1 Hardness Grade 1-632- Net Price
Our Net Price 46-I 32AR46-IV40 -62240 $290.05
Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty.
60-K 32AR60-KV40 -27338 $27.86 5 $23.82
32A 46-H
46-I
-37707
-37708
$18.60
18.60
10
10
$15.90
15.90
46-H
46-I
-37745
-37718
$95.00
95.00
2
2
$81.23
81.23
Surface 46-J
46-K
-37709
-37735
18.60
18.60
10
10
15.90
15.90
60-K -37746 95.00 2 81.23
Grinding 60-J
60-K
-37710
-37711
18.60
18.60
10
10
15.90
15.90 14" x 1-1/2" x 5" - 1,910 RPM
Wheels 80-K -37736 18.60 10 15.90
Part No.
Our Net Price
Box Each
10" x 1" x 3" - 2,674 RPM Grit 1-595- Each Quantity Box Qty.
Our Net Price 46-H -37719 $125.00 2 $106.88
FEATURES: Part No. Box Each 46-I -37747 125.00 2 106.88
• Sharp mono-crystalline Grit 1-595- Each Quantity Box Qty. 46-J -37720 125.00 2 106.88
aluminum oxide grain with premium CGW bond 46-J -37737 $50.85 5 $43.48
offers excellent versatility and performance 60-J -37738 50.85 5 43.48 14" x 1-1/2" x 5" - 1,910 RPM - Recess One Side 8" x 1/2"
on a wide range of applications and materials. Our Net Price
• Ideal for medium to heavy stock removal. 12" x 1" x 3" - 2,228 RPM
Part No. Box Each
• Outstanding form holding wheel with free cutting grain. Our Net Price Grit 1-595- Each Quantity Box Qty.
Part No. Box Each
Grit 1-595- Each Quantity Box Qty. 46-H -37721 $125.00 2 $106.88
7" x 1/2" x 1-1/4" - 3,600 RPM 46-I -37722 125.00 2 106.88
Our Net Price 46-H -37712 $61.70 2 $52.75 46-K -37748 125.00 2 106.88
Part No. Box Each 46-J -37713 61.70 2 52.75 60-J -37749 125.00 2 106.88
Grit 1-595- Each Quantity Box Qty. 60-K -37739 61.70 2 52.75
14" x 2" x 5" - 1,910 RPM
46-H -37700 $14.10 10 $12.06 12" x 1" x 5" - 2,228 RPM
46-I -37701 14.10 10 12.06 Our Net Price Part No. Our Net
46-J -37702 14.10 10 12.06 Grit 1-595- Price/Ea.
46-K -37703 14.10 10 12.06 Part No. Box Each
60-I -37704 14.10 10 12.06 Grit 1-595- Each Quantity Box Qty. 46-H -37750 $161.60
60-J -37705 14.10 10 12.06 46-J -37723 161.60
60-K -37706 14.10 10 12.06 46-J -37740 $63.85 2 $54.59
80-K -37728 14.10 10 12.06 46-K -37741 63.85 2 54.59
60-J -37742 63.85 2 54.59 14" x 2" x 5" - 1,910 RPM
60-K -37743 63.85 2 54.59 - Recess One Side 8" x 1"
7" x 3/4" x 1-1/4" - 3,600 RPM - Recess One Side 3" x 1/4"
12" x 1-1/2" x 5" - 2,228 RPM - Recess One Side 7-1/2" x 1/2" Part No. Our Net
Our Net Price Grit 1-595- Price/Ea.
Part No. Box Each Our Net Price
46-H -37724 $161.60
Grit 1-595- Each Quantity Box Qty. Part No. Box Each 46-I -37725 161.60
46-H -37729 $23.10 10 $19.75 Grit 1-595- Each Quantity Box Qty. 46-J -37751 161.60
46-J -37730 23.10 10 19.75 46-H -37714 $92.60 2 $79.17 60-K -37726 161.60
60-J -37731 23.10 10 19.75 46-J -37715 92.60 2 79.17
60-K -37744 92.60 2 79.17 14" x 2" x 5" - 1,910 RPM
7" x 1" x 1-1/4" - 3,600 RPM - Recess One Side 3" x 1/2" - Recess Two Sides 8" x 3/8"
Our Net Price
12" x 2" x 5" - 2,228 RPM
- Recess Two Sides 7-1/2" x 1/2" Part No. Our Net
Part No. Box Each Grit 1-595- Price/Ea.
Grit 1-595- Each Quantity Box Qty. Part No. Our Net
46-H -37732 $28.90 10 $24.71
Grit 1-595- Price/Ea. 46-H -37752 $161.60
46-J -37733 28.90 10 24.71 46-H -37716 $107.90 46-I -37727 161.60
60-J -37734 28.90 10 24.71 46-I -37717 107.90 60-K -37753 161.60
Feed Regulating
FEATURES:
Wheels A80-R2-RX • Accurate tolerances inside NATURAL RUBBER (A80-R2-RX)
(RUBBER BONDED) lining to protect spindle. This wheel gives the best drive
• Wheels have varied hardness or braking action while resisting
to assure consistent grindability. spin out of parts. This grade is
• Unique isostatic process satisfactory for the majority
assures perfect gripping. of applications.
FLAMM ABILITY
FEATURES:
• The best choice in all
dedicated grinding applications. HEALTH REACTIVITY
f ullyd
guarantee
Vitrified Bond
H - 1" Hole, Installed telescopic bushings for 3/4", 5/8" and 1/2"arbors.
Premium Grain Bench
Grinding Wheels
Premium Blue Aluminum Oxide
White Aluminum Oxide
for HSS 55 Rc and above, high carbon
tool steels and woodworking applications. highly friable grain for fast and cool
Engineered for free cutting action while cutting. Light grinding of all types of
pulling heat away from the part and steel including tool and die steels;
into the matrix of the wheel. fast sharpening of all tools.
H - 1" Hole, Installed telescopic bushings for 3/4", 5/8" and 1/2"arbors.
H2 - 1-1/4" Hole, Installed telescopic bushings for 1" and 3/4" arbors.
H3 - 1-1/2" Hole, Installed telescopic bushings for 1-1/4" and 1" arbors.
FLARING DISH
FLARING CUP - Type 11 - 4/3 x 1-1/2" x 1-1/4" CUP WHEEL
Type #11 Type #12
Our Net Price
Part No. Box Each
Grit 1-704- Each Quantity Box Qty.
46-J -312 $13.40 10 $11.46
60-J -336 13.40 10 11.46
60-K -342 13.40 10 11.46
80-K* -348 13.40 10 11.46
FLARING CUP - Type 11 - 5/3-3/4" x 1-3/4" x 1-1/4" DISH WHEEL - Type 12 - 6" x 1/2" x 1-1/4"
Our Net Price Our Net Price
Part No. Box Each Part No. Box Each
Grit 1-704- Each Quantity Box Qty. Grit 1-704- Each Quantity Box Qty.
46-H -302 $20.05 10 $17.14 46-K* -360 $12.95 10 $11.07
46-J
60-J
80-K
-314
-338
-350
20.05
20.05
20.05
10
10
10
17.14
17.14
17.14
60-J*
80-K
-362
-366
12.95
11.20
10
10
11.07
9.58 f ully
guaranteed
* WHILE SUPPLIES LAST.
Tool & Cutter Tool & Cutter Grinding Wheels are used for the grinding or resharpening of
milling cutters, reamers, drills or end mills for the purpose of restoring keen
Grinding Wheels cutting edges or exact cutting angles.
AA Aluminum Oxide
Premium (White) 5/3-3/4 x 1-3/4" x 1-1/4" Rim 1/4", Back 1/2" - TYPE 11
Our Net Price
Ideal for grinding heat sensitive Grit Part No. Box Each
steels, as well as easy- and Hardness Grade 1-632- Each Quantity Box Qty.
medium-to-grind high-speed 60-J AA60-JV40 -09783 $41.25 5 $35.27
steels and cast, alloy steels. 60-K AA60-KV40 -09782 41.25 5 35.27
Use V40 bond for general
purpose applications or
medium contact areas.
6 x 1/2" x 1-1/4" Rim 3/8", Back 5/16" - TYPE 12
FEATURES: Our Net Price
• For fast stock removal in light to Grit Part No. Box Each
medium stock removal operations. Hardness Grade 1-632- Each Quantity Box Qty.
• Excellent friability creates cool cutting action. 60-J AA60-JV40 -09777 $26.83 5 $22.94
• Durable, vitrified bond for long wheel life.
32AR Aluminum
Oxide Premium 4/3 x 1-3/4" x 1-1/4" Rim 1/4", Back 1/2" - TYPE 11
(Grey/Purple) Our Net Price
Grit Part No. Box Each
Ideal for moderate to heavy Hardness Grade 1-632- Each Quantity Box Qty.
infeed rates, rapid stock 46-K 32AR46-KV40 -27679 $29.87 5 $25.54
removal and precision 60-J 32AR60-JV40 -27680 29.87 5 25.54
contouring - for all types of 60-K 32AR60-KV40 -27681 29.87 5 25.54
tool steels. Use V40 bond for
general purpose applications
or medium contact areas.
5/3-3/4 x 1-3/4" x 1-1/4" Rim 1/4", Back 1/2" - TYPE 11
FEATURES: Our Net Price
• Exceptionally cool, fast cutting. Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty.
• Strong, sharp monocrystaline grain
blend for excellent resistance to 46-J 32AR46-JV40 -27682 $50.21 5 $42.93
point wear and good penetration 46-K 32AR46-KV40 -27684 50.21 5 42.93
on tough alloy steels. 60-J 32AR60-JV40 -27685 50.21 5 42.93
• Tough, yet friable grain, holds form 60-K 32AR60-KV40 -27683 50.21 5 42.93
well and requires less dressing.
• Strong vitrified bond
for load resistance.
STRAIGHT FLARING DISH
5 x 1-1/2" x 1-1/4" Rim 3/8", Back 3/8" - TYPE 6 CUP CUP WHEEL
Type #6 Type #11 Type #12
Our Net Price
Grit Part No. Box Each
Hardness Grade 1-632- Each Quantity Box Qty.
46-K 32AR46-KV40 -62288 $43.88 5 $37.52
60-K 32AR60-KV40 -27705 43.88 5 37.52
Welding &
Pink Grain Fabricating
Cup Wheels Flaring Cup Wheels
Heavy Duty Snagging Type
FEATURES:
• Ideal for grinding medium and hard to
grind high speed steels and cast alloy steels. ALUMINUM OXIDE - RESIN BONDED
• Sharper grain for fast, cool cutting action.
• More friable than White Aluminum Oxide grain.
• Excellent when rapid stock removal is a must. Ideal for cleaning castings,
weld grinding and general
off-hand rough grinding. TYPE 11 - A16 Grit
4/3 x 1-1/2" x 1-1/4" - 6,685 RPM These top quality wheels 6/4-3/4" x 2" x 5/8"-11
combine excellent service Part No. 1-708-056
Part No.
Our Net Price
Box Each
life and safety with low
cost. Easily mounted with Our Net Price f ully
guaranteed
Grit 1-595- Each Quantity Box Qty. 75
5/8"-11 threaded bore. $16
46-K -58054 $14.30 10 $12.23
60-I -58055 14.30 10 12.23
60-K -58056 14.30 10 12.23
80-K -58057 14.30 10 12.23
CUP
WHEEL
Flaring Cup Wheels
5/3-3/4 x 1-3/4" x 1-1/4" - 5,348 RPM
TYPE 11 - A16 Grit TYPE 11 - A24 Grit
Our Net Price Heavy 4/3 x 2" x 5/8"-11 6/4-3/4" x 2" x 5/8"-11
Part No. Box Each Duty
Grit 1-595- Each Quantity Box Qty. Part No. 1-595-49000 Part No. 1-595-49011
Snagging Our Net Price Our Net Price
46-I -58058 $22.35 10 $19.11
46-K -58059 22.35 10 19.11 Type
60-K -58060 22.35 10 19.11 $1330 $1885
Plate-Mounted Plate-Mounted
Metal-Backed Wheels Metal-Backed Wheels
WHITE PREMIUM ALUMINUM OXIDE
46-K GRIT
GREEN SILICON
CARBIDE f ully
guaranteed
Maintains a sharp cutting edge that cuts cooler, Green silicon carbide abrasive is produced by
resulting in longer life and lower grinding costs. It is means of a special recipe and manufacturing process.
used for grinding high tensile strength materials such It is semi-transparent in green color. Its purity is high,
as: steel, stainless steel and tough bronzes. It is also very and its performance is suited for grinding non-metallic
effective for rough grinding of many low tensile strength materials. materials of high hardness and cemented carbides.
Size
Part No.
1-704- Each
Box
Qty.
Each
Box Qty. f ully
guaranteed
Size
Grit
60-I
Grit
80-I
Grit
100-I Each
Box
Qty.
Each
Box Qty.
6" x 1" x 4" -368 $31.90 10 $27.27 6" x 1" x 4" -070 -072 -074 $34.35 10 $29.37
1" x 1" x 6" 1" x 1" x 8" 1/2" Sq. x 4" Long 3/4" Sq. x 6" Long
Part No. 1-578-006 Part No. 1-578-008 Part No. 1-640-270 Part No. 1-640-271
Our Net Price Our Net Price Our Net Price Our Net Price
$305 $375 $225 $375
Silicon Carbide (Black) - Coarse grit (24) sticks VITRIFIED - ALUMINUM OXIDE
are used for dressing conventional vitrified wheels.
Finer grits are used for dressing diamond wheels. Part No. Our
Size Grit 1-632- Net Price
4" x 1/2" x 1/2" 220 -15555 $3.21
VITRIFIED - SILICON CARBIDE 6" x 1/2" x 1/2" 150 -10303 5.63
Part No. Our
6" x 1/2" x 1/2" 220 -10103 5.63
Size Grit 1-632- Net Price 4" x 3/4" x 3/4" 150 -10291 4.99
4" x 3/4" x 3/4" 220 -10290 4.99
6" x 1/2" x 1/2" 150 -10205 $7.11
8" x 3/4" x 3/4" 220 -10280 9.48
6" x 1" x 1" 24 -10462 14.27
6" x 1" x 1" 220 -10398 14.27 6" x 1" x 1" 150 -10405 11.28
6" x 1" x 1" 220 -10406 11.28
Heavy-Duty
Dressers
Heavy-duty dressers
remove the dead load from
snag grinders in seconds. Radius
& Angle
FEATURES: Dressers
• Rugged cast iron body.
• Full-length foot makes it Part No. Replacement FEATURES: LOW SPECIFICATIONS:
easy to hook dresser over 1-607-14410 Cutter Set
• Adjustable gibs. Max. Dia. of wheel ............................. 8"
a worn toolrest. Part No. 1-607-14420
Our Net Price Our Net Price • An extremely accurate and Convex Radii ....................... 0 - 1-3/16"
• Slanted star-toothed versatile unit for use on all O.D., Concave Radii ................ 1/32 - 1-3/16"
hardened steel cutters. $5775 $1325 I.D. surface grinding operations. Tangent Travel† ............................. 1.20"
• Gage block setting for Center line of tool .............................. 3"
grinding precise radii. †
Either side of center.
• Radius is set on the grinder
Thriftline Model by measuring over the two STANDARD SPECIFICATIONS:
pins or by inserting a gage Max. Dia. of wheel .................. 10" (12"*)
Truing Device block for direct reading. Covex Radii ................... 0 - 1-5/8" (6"**)
• Inside or outside radius is Concave Radii ....... 1/32- 1-5/8"*** (6"**)
determined by using either Tangent Travel† ................................... 2"
For occasional, non-production the left or the right hand pins. Center line of tool ............................. 3.4"
truing of diamond and CBN †
Either side of center.
wheels with a minimum of Low Profile
superabrasive loss. Use for Part No. 8-550-000 ACCESSORIES FOR STANDARD 8-550-001
grinding wheel sizes up to Our Net Price
18" x 3". 00 – Extension arbor for 12" wheel.
$1295 Part No. 8-553-309 $143.10*
FEATURES: – Extension adapter for 1-5/8" to 6"
• Single speed, Standard Profile concave radii & convex radii when used with
riser blocks. Part No. 8-553-308 $470.00*
brake-controlled spindle. Part No. 8-550-001
• No adjusting required. – Rat-Tail adapter for 1/32" to 5/8" small
• Lower cost. Our Net Price concave radii. Part No. 8-553-306 $40.50*
Diamond Single Point Dressers Product Shank Diamond Part No. Our
FOR ALUMINUM OXIDE WHEELS Number Diameter Carat Wt. 1-632- Net Price
T1UA 3/8" 1/5 -92001 $37.15
T2UA 3/8 1/4 -92002 42.15
Most popular for straight dressing Ø3/8 -or- 7/16 T3UA* 3/8 1/3 -92003 46.80
of aluminum oxide abrasive wheels. T4UA 3/8 1/2 -92004 55.90
T5UA 3/8 3/4 -92005 84.90
FEATURES: T6UA 3/8 1 -92006 121.20
• Sharp, long lasting diamond. 30° T1UB* 7/16 1/5 -92007 37.15
• Various grades and qualities. 2 T2UB 7/16 1/4 -92008 42.15
• Fast truing and dressing action. NOTE: T3UB 7/16 1/3 -92009 46.80
• Accommodate various precision GRADE U T4UB 7/16 1/2 -92010 55.90
dressing applications. NO RESET. T5UB 7/16 3/4 -92011 84.90
• Long tool life. * WHILE SUPPLIES LAST. T6UB 7/16 1 -92012 121.20
Available with
Diamond T-Bar Dresser Thread-Grinding 60°, 75° or 90° front
Diamond Tools clearance angle.
Diamond Ø
7
16
1
Ø
7
16
3
8
Grit Tools 3
16
Ø4
1
4
Ø 38 7
Ø 16
1
4 1
4
15
NT24A
GT-3 NT26S
GT-4 16 NT26A
GT-6
MNT24A 1 MNT26S 3
MNT26A 3
4
2 3
3 4
7 8
8 3
l 8
16 l
l 3
3 15°
15
8 15° 7 8 1
1
4 16 3 4
1
7 7 16
Ø 16 9 4
7
1 Ø 16 5
16 Ø 16 4 1
16
4
"A" SHAPES
Ideal for general maintenance
applications in metal fabrication plants.
Wheel Wheel Max. Part No. Our
Shape Size Grade RPM 1-632- Net Price
Aluminum Oxide Abrasive A1 3/4" x 2-1/2" 36-T 19,800 -07089 $3.75
A1 3/4 x 2-1/2 60-P 19,800 -07090 3.47
Mounted Points A2 1 x 1-1/4 60-P 38,200 -09559 1.71
A3 1 x 2-3/4 60-P 16,100 -07092 3.70
A3 1 x 2-3/4 36-T 16,100 -07091 3.99
A4 1-1/4 x 1-1/4 60-P 30,560 -07093 2.48
A5 3/4 x 1-1/8 36-T 45,000 -07094 2.13
A5 3/4 x 1-1/8 60-P 45,000 -07095 2.15
A6* 3/4 x 1-1/8 60-P 39,000 -23998 1.50
A11 7/8 x 2 36-T 19,860 -07096 2.51
A11 7/8 x 2 60-P 19,860 -07097 2.53
A12 11/16 x 1-1/4 36-T 48,000 -07098 2.15
A12 11/16 x 1-1/4 60-P 48,000 -07099 2.15
A13 1-1/8 x 1-1/8 60-P 33,950 -09549 2.53
A14 11/16 x 7/8 60-P 55,560 -07100 1.60
A15 1/4 x 1-1/16 60-P 72,750 -07101 2.05
A21 1x1 60-P 34,500 -07102 1.78
A22* 3/4 x 5/8 60-P 50,930 -07103 1.09
A23 3/4 x 1 60-P 39,370 -23997 1.60
A24 1/4 x 3/4 60-P 76,500 -07104 1.45
A25 1" Ball 60-P 35,620 -07105 1.78
A26 5/8 Ball 60-P 61,120 -07106 1.55
A31 1-3/4 x 1 60-P 27,780 -09542 2.15
FEATURES: A32* 1 x 5/8 60-P 38,200 -07107 1.14
• Quality aluminum oxide abrasive - A33* 1 x 1/2 60-P 38,200 -23996 1.09
brown, for fast stock removal. A34 1-1/2 x 3/8 60-P 25,470 -09541 1.85
• Vitrified bond provides long life A35* 1 x 3/8 60-P 38,200 -23995 1.09
and consistent form holding. A36 1-5/8 x 3/8 60-P 23,520 -07108 2.15
A37 1-1/4 x 1/4 60-P 30,560 -07109 1.60
A38 1x1 60-P 34,500 -07110 1.45
A39 3/4 x 3/4 60-P 47,250 -07111 1.29
A40 3/4 Ball 60-P 47,250 -07112 1.55
All “A” Shapes are supplied with 1/4" spindles.
"W" SHAPES For best mounted point performance, always
Ideal for precision grinding machine parts, molds and "B" SHAPES run the mounted point at the maximum
dies, involving medium to heavy stock removal. allowable speed according to ANSI B7.1
Ideal for light deburring of machined
Wheel Wheel Max. Part No. Our parts and for finishing/polishing molds and dies.
Shape Size Grade RPM 1-632- Net Price
W144†† 1/8" x 1/4" 60-P 105,000 -07133 $1.01 Wheel Wheel Max. Part No. Our
W145† 1/8 x3/8 90-Q 105,000 -07134 .82 Shape Size Grade RPM 1-632- Net Price
W152† 3/16 x 1/4 60-P 105,000 -07135 1.01 B44 7/32" x 3/8" 60-P 68,400 -07113 $1.37
W153† 3/16 x 3/8 60-P 80,850 -07136 1.06 B51 7/16 x 3/4 60-P 45,370 -07114 1.47
W154† 3/16 x 1/2 60-P 70,500 -07137 1.06 B52† 3/8 x 3/4 60-P 45,370 -07116 1.49
W160† 1/4 x 1/4 60-P 81,370 -07138 .99 B52 3/8 x 3/4 60-P 45,370 -07117 1.49
W162† 1/4 x 3/8 60-P 68,400 -07139 1.06 B52 3/8 x 3/4 90-Q 45,370 -07115 1.49
W163 1/4x x1/2 60-P 60,000 -07140 1.07 B53 5/16 x 5/8 60-P 60,000 -07118 1.49
W176†† 3/8 x 1/2 60-P 45,370 -07141 1.06 B55 1/4 x 1/4 60-P 105,000 -07119 1.29
W185 1/2 x 1/2 60-P 34,500 -07142 1.06 B91 1/2 x 5/8 60-P 34,500 -07120 1.49
W188† 1/2 x 1-1/2 60-P 30,370 -07143 1.85 B96 1/8 x1/4 60-P 105,000 -07122 1.16
W200 3/4 x 1/8 60-P 50,930 -07144 1.11 B96 1/8 x 1/4 90-Q 105,000 -07121 1.16
W206† 3/4 x 1-1/4 60-P 28,720 -07145 1.27 B97 1/8 x 3/8 60-P 105,000 -07123 1.32
W215 1 x 1/8 60-P 38,200 -07146 1.12 B121 1/2 Ball 60-P 45,370 -07124 1.27
W220 1x1 60-P 25,500 -07147 1.45 B122 3/8 Ball 60-P 61,650 -07126 1.37
W222 1x2 36-T 15,900 -07148 2.04 B122 3/8 Ball 90-Q 61,650 -07125 1.32
W222 1x2 60-P 15,900 -07149 2.53 B123 3/16 Ball 60-P 104,250 -07127 1.16
W225 1-1/4 x 1/4 60-P 30,560 -07150 1.05 B124 1/8 Ball 90-Q 104,000 -07128 1.19
W235 1-1/2 x 1/4 60-P 25,470 -07151 1.45 B131 1/2 x 1/2 60-P 34,500 -07129 1.02 * WHILE
W236 1-1/2 x 1/2 60-P 25,470 -07152 1.55 B132 3/8 x 1/2 60-P 45,370 -07130 1.06
B134 5/16 x 3/8 60-P 61,650 -07131 1.07 SUPPLIES
W238 1-1/2 x 1-1/2 60-P 15,600 -07153 2.53 B135 1/4 x 1/2 60-P 60,000 -07132 1.06
W242 2x1 60-P 19,100 -07154 2.38 LAST.
†
†
Supplied with 1/8" spindles. All other Supplied with 1/4" spindles. All other “B” Shapes
“W” Shapes supplied with 1/4" shanks. supplied with 1/8" shanks.
5 Pc.
Mounted
Stone
16 Pc. Die Sets
Grinder
Kit
Stone Set
1/4" Shank
FEATURES:
• Bonded Aluminum
PT2430 FEATURES: KIT INCLUDES: Oxide Construction.
• Easy to handle. • Multi-purpose, PT2430 • Maximum 12,000 RPM.
• Full size to handle most general purpose full sized grinder. • Ideal for grinding,
to heavy-duty grinding applications. • Includes 10 grinding stones! polishing, carving,
• Ideal for grinding, deburring, • Sturdy blow molded case makes cleaning, and deburring. Mini Stone Set
porting and polishing. it easy to store and carry. 1/8" Shank
DIAMOND CONCENTRATION:
Magnicon Bonding makes possible a higher concentration of
diamond powder. Starlite products guarantee 150 concentration D
for faster-cutting longer-lasting diamond grinding tools. 1/8 1/8
C
B
DIAMOND SAWS GRIT 40/60
Dia. Width Hole No. of Slot Slot Part No. Our
For use in high speed collet type grinders.
D B C Slots Width Depth 1-640- Net Price
2" .080" 3/8" 4 1/8" 3/8" -152010 $61.30
Mounted points can be restored to their original 3 .080 5/8 4 1/8 3/8 -152015 79.85
4 .080 3/4 6 1/8 3/8 -152020 100.65
shape or changed in seconds while removing A
the grinding load with the MP Dresser. B
DIAMOND ROUTERS GRIT 30/40
MP Dresser Extra Cutter Set
Dia. OAL No. of Slot Slot Part No. Our C
Part No. 1-607-200 Part No. 1-607-201 A/B C D Slots Width Depth 1-640- Net Price D
Our Net Price Our Net Price 1/8" 1/2" 2" 2 .031" .031 -153125 $19.70
$1800 $740 1/4
3/8
3/4
1
2-1/2
3
2
4
.046
.093
.046
.093
-153250
-153375
27.00
40.45 WHILE SUPPLIES LAST.
Top-Quality, Low-Cost!
X T
Diamond-Studded
E
150 Grit
Our Net Price H 100 Concentration
Part Diamond CBN
Size No. 1-640- 1-640C- Dia. Thick. Rim Hole Part No. Our
D Depth X W H 1-640- Net Price * WHILE
4" x .035" x 1-1/4" -263 $44.00 $57.20
5 x .035 x 1-1/4 -264 51.50 66.95 3" 7/8" 3/8" 1-1/4" -180 $134.00 SUPPLIES
6 x .035 x 1-1/4 -265 52.00 86.84 Use CBN on ferrous 4 1-1/4 1/2 1-1/4 -181 165.00 LAST.
FIBER CORE NO HUB 5* 1-3/4 3/8 1-1/4 -182 168.00
material. Use Diamond
6" x .035" x 1-1/4" -266 52.00 86.84 on non-ferrous material.
Diamond
Wheels
Thriftline
Diamond FEATURES:
• Pre-engineered resin bond.
Wheels • High quality synthetic diamond.
• Free cutting.
• Superior form holding.
• High material removal rate.
FEATURES: • Long wheel life.
• Lower diamond concentration. • 75 concentration.
• Produced in large volumes.
• Easy to use. TYPE 1A1
• Lower costs.
Bore Dia. D
Dia. Thick. Size Depth Part No. Our
Ideal for the occasional user, for economical and efficient Use Diamond D T H X Grit 1-632- Net Price
X T
production grinding, and for keeping wheel investment to a on non-ferrous $97.59
minimum. Available from stock in three grit sizes: 100 for 1" 1/4" 1/4" 1/8" 220 -92138
material. 3 1/8 3/4 1/8 150 -92139 120.97
roughing, 150 for general purpose, and 220 for finishing. 6 1/8 1-1/4 1/8 150 -92140 218.67 H
6 1/2 1-1/4 1/8 120 -92147 354.73
TYPE 1A1
Bore Dia. D Use Diamond
Dia. Thick. Size Depth Part No. Our X T
TYPE 11V9 - Dia. Depth X = 1/8" * on non-ferrous
D T H X Grit 1-632- Net Price Bore material.
6" 1/4" 1-1/4" 1/8" 100 -92131 $132.36 Dia. Thick. Size Insert Part No. Our
6 1/4 1-1/4 1/8 150 -92132 132.36 D T H Length Grit 1-632- Net Price D
6 1/4 1-1/4 1/8 220 -92133 132.36 H 3-3/4" 1-1/2" 1-1/4" 3/8" 100 -92158 $224.75 X
3-3/4 1-1/2 1-1/4 3/8 150 -92159 224.75
TYPE 1A1R 5 1-3/4 1-1/4 7/16 100 -92161 283.77
D
5† 1-3/4 1-1/4 7/16 150 -92162 262.61 T
Bore Dia. T 5 1-3/4 1-1/4 7/16 150 -64001 206.89
X
Dia. Thick. Size Depth Part No. Our E
D T H X Grit 1-632- Net Price H
TYPE 6A2C
D
Bore Dia. X
Dia. Thick. Size Depth Part No. Our 3/4" Rim Width X
D T H X Grit 1-632- Net Price T
6" 3/4" 1-1/4" 1/8" 100 -92135 $154.40
6 3/4 1-1/4 1/8 220 -92137 154.40 E H
Diamond Wheels
B.C.
TYPE 11V9
Bore Dia. These high performance diamond wheels
Dia. Thick. Size Insert Depth Part No. Our D are ideal for dry grinding carbide.
X
D T H Length X Grit 1-632- Net Price
3-3/4" 1-1/2" 1-1/4" 3/8" 1/16" 100 -92125 $126.20
3-3/4 1-1/2 1-1/4 3/8 1/8 100 -92126 132.36 T
FEATURES:
3-3/4 1-1/2 1-1/4 3/8 1/8 150 -92128 132.36 • Premium, consistently high quality superabrasive.
3-3/4* 1-1/2 1-1/4 3/8 1/16 220 -92129 104.12 • High performance resin bond. Use Diamond on
3-3/4 1-1/2 1-1/4 3/8 1/8 220 -92130 132.36 H
• Advanced, heat reducing bond. non-ferrous material.
* WHILE SUPPLIES LAST. • Tools require less reconditioning.
• Significantly increased tool life and productivity. D
X
• Eliminates heat damage to workpiece.
Use Diamond on • Grinds cool without coolant.
non-ferrous material. • Prevents loading. T
• Longest tool life and highest productivity.
Diamond TYPE 11V9 - FLARING CUP
H
FEATURES: FEATURES:
• High performance resin bond. • Quality aluminum oxide abrasive. Fast stock removal.
• 60% faster stock removal and a minimum • Advanced resin bond. Free cutting
of 3 times the life over aluminum oxide wheels. without a reduction in wheel life.
• Highest productivity; lowest total grinding cost. • Exceptional balance. No vibration. No
Zirconia • Exceptional balance. No vibration or Aluminum burring of workpiece. Less grinder
Alumina bouncing on workpiece. Less grinder Oxide maintenance. Less operator fatigue.
Abrasives maintenance. Less operator fatigue. Abrasives • Unique glass cloth reinforcement design.
• Unique glass cloth reinforcement design. No fraying or spalling of abrasive grit.
No fraying or spalling of abrasive grit.
Z24 A24
Our Net Price Our Net Price
Max. Part No. Box Each Max. Part No. Box Each
Size RPM 1-632- Each Quantity Box Qty. Size RPM 1-632- Each Quantity Box Qty.
4" x 1/4" x 5/8" 15,280 -02868 $5.20 20 $4.45 4" x 1/4" x 5/8" 15,280 -02837 $2.64 20 $2.26
4-1/2 x 1/4 x 7/8 13,580 -02872 5.20 20 4.45 4-1/2 x 1/4 x 7/8 13,580 -02842 2.18 20 1.86
4-1/2 x 1/4 x 5/8-11 13,580 -02873 6.23 20 5.33 7 x 1/4 x 7/8 8,600 -02853 4.69 20 4.01
5 x 1/4 x 7/8 12,225 -02876 7.98 20 6.82 7 x 1/4 x 5/8-11 8,600 -02854 6.13 10 5.24
7 x 1/4 x 7/8 8,600 -02881 9.68 20 8.28 9 x 1/4 x 7/8 6,600 -02857 6.54 20 5.59
7 x 1/4 x 5/8-11 8,600 -02883 11.12 10 9.51 4-1/2 x 1/8 x 7/8* 13,580 -04710 2.13 20 1.82
9 x 1/4 x 7/8* 6,600 -02887 13.01 10 11.12 7 x 1/8 x 7/8*† 8,600 -04715 4.35 20 3.92
* These wheels can be used for both light grinding and cutting. †
WHILE SUPPLIES LAST.
* WHILE SUPPLIES LAST.
Z24 Long Life A30
Our Net Price Our Net Price
Max. Part No. Box Each Max. Part No. Box Each
Size RPM 1-632- Each Quantity Box Qty. Size RPM 1-632- Each Quantity Box Qty.
7" x 1/4" x 7/8" 8,600 -02882 $9.68 20 $8.28 4-1/2" x 1/4" x 7/8" 13,580 -03511 $2.89 20 $2.47
7 x 1/4 x 5/8-11 8,600 -02884 11.12 10 9.51
9 x 1/4 x 5/8-11 6,600 -02890 14.73 10 12.59
A46
Our Net Price
Zirconia Alumina/Aluminum Max. Part No. Box Each
Oxide Abrasive Blend Size RPM 1-632- Each Quantity Box Qty.
10% faster cut 4-1/2" x 1/4" x 7/8" 13,580 -03588 $6.18 20 $5.28
FEATURES: rate and 30%
• Free cutting bond. longer life than
• Smooth grinding action that
maximizes productivity and standard aluminum
minimizes operator fatigue. oxide wheels.
ZA24-R
Our Net Price
CARBO Aluminum Oxide Abrasives
Max. Part No. Box Each METAL FEATURES:
Size RPM 1-632- Each Quantity Box Qty.
Economical choice for • Quality aluminum oxide abrasive.
4-1/2" x 1/4" x 5/8-11 13,580 -70192 $3.91 20 $3.52 initial-price-conscious Quick stock removal on hard metals.
4-1/2 x 1/4 x 7/8 13,580 -70191 2.84 20 2.56 customers with general • Low initial cost per wheel. Ideal for
5 x 1/4 x 7/8 12,225 -70193 4.51 20 4.06 purpose applications. on-site and small-unit jobs.
7 x 1/4 x 5/8-11 8,600 -70195 7.00 10 6.30
7 x 1/4 x 7/8 8,600 -70194 5.50 20 4.95 A24
9 x 1/4 x 5/8-11 6,600 -70197 9.30 10 8.37 Our Net Price
9 x 1/4 7/8 6,600 -70196 7.80 20 7.02 Max. Part No. Box Each
4-1/2 x 1/8 x 5/8-11* 13,580 -32395 3.70 20 3.33 Size RPM 1-632- Each Quantity Box Qty.
4-1/2 x 1/8 x 7/8* 13,580 -32507 2.65 20 2.39
4-1/2" x 1/4" x 5/8-11 13,580 -61568 $2.62 20 $2.24
5 x 1/8 x 7/8* 12,225 -32508 4.25 20 3.83 4-1/2 x 1/4 x 7/8 13,580 -61567 1.72 20 1.47
7/8 x 1/8 x 5/8-11* 8,600 -32396 6.65 10 5.99 5 x 1/4 x 7/8 12,225 -61571 2.38 20 2.03
7 x 1/8 x 7/8* 8,600 -32509 5.15 20 4.64 7 x 1/4 x 5/8-11 8,600 -61576 4.79 10 4.10
7 x 1/4 x 7/8 8,600 -61575 3.53 20 3.02
* These wheels can be used for both light grinding and cutting.
T ECH T IP 30°
Depressed Center Wheel
Metal Adapter Kit
For best results, hold your
right angle grinder at a: Contains the items necessary to mount depressed
center wheels with 7/8" center holes on to standard
• 30° angle with 1/4" and portable right angle or vertical shaft grinders. Adapter Part No.
1/8" thick Type 27 wheels. hubs are threaded for mounting on to standard 5/8"-
• 90° angle with .045", 11 NCRH spindles. This adapter kit may be used 1-632-89275
1/16", 3/32", .125" and 90° with wheel thicknesses or 1/8" or 1/4". All depressed Our Net Price
1/8" thick Type 27 wheels. center wheels must use the proper adapters to
securely mount to the spindle. $2184
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com
DEPRESSED CENTER WHEELS • abrasives 547
METAL
Depressed A24N Fast Cut: Soft N-grade bond for fast stock removal. Excellent ratio of
stock removal/wheel loss. Economical choice for metal and low-grade stainless.
Center
Our Net Price
Wheels Max. Part No. Box Each
TYPE 27 Size RPM 1-602- Each Qty. Box Qty.
4" x 1/4" x 3/8" 15,300 -35672 $1.34 25 $1.15
4" x 1/4" x 5/8" 15,300 -35699 1.30 25 1.11
4-1/2 x 1/4 x 7/8 13,300 -35622 1.44 25 1.23
4-1/2 x 1/4 x 5/8-11 13,300 -35623 2.73 10 2.33
7 x 1/4 x 7/8 8,600 -35642 2.52 25 2.15
7 x 1/4 x 5/8-11 8,600 -35643 4.36 10 3.73
TYPE 27 9 x 1/4 x 7/8 6,600 -35656 4.50 25 3.85
9 x 1/4 x 5/8-11 6,600 -35657 5.92 10 5.06
A24R Fast Cut: Economical choice for fast metal grinding. Premium Grade.
Our Net Price
1/8" Cutting/Notching Wheels Max. Part No. Box Each
Size RPM 1-602- Each Qty. Box Qty.
METAL 4" x 1/4" x 5/8" 15,300 -35610 $1.21 25 $1.03
A24Q Fast Cut: Aluminum oxide grain. Q-grade bond for fast cutting.
Economical choice for metal, steel and general applications. A24R: #1 selling 1/4" Depressed Center Grinding Wheel.
R-grade bond for longer life and excellent stock removal.
Our Net Price
Max. Part No. Box Each Our Net Price
Size RPM 1-602- Each Qty. Box Qty. Max. Part No. Box Each
4" x 1/8" x 3/8" 15,300 -35671 $1.19 25 $1.02 Size RPM 1-602- Each Qty. Box Qty.
4 x 1/8 x 5/8 15,300 -35609 1.19 25 1.02 4-1/2" x 1/4" x 7/8" 13,300 -35620 $1.79 25 $1.53
4-1/2 x 1/4 x 5/8-11 13,300 -35621 3.36 10 2.87
A24R: Aluminum oxide grain. R-grade bond for fast cutting 5 x 1/4 x 7/8 12,300 -35626 2.22 25 1.90
and long life. Works well on steel, cast iron, and welds. 5 x 1/4 x 5/8-11 12,300 -35628 3.80 10 3.25
7 x 1/4 x 7/8 8,600 -35640 2.92 25 2.50
Our Net Price 7 x 1/4 x 5/8-11 8,600 -35641 4.95 10 4.23
Max. Part No. Box Each 9 x 1/4 x 7/8 6,600 -35654 5.06 25 4.33
Size RPM 1-602- Each Qty. Box Qty. 9 x 1/4 x 5/8-11 6,600 -35655 7.07 10 6.04
4-1/2" x 1/8" x 7/8" 13,300 -35612 $1.49 25 $1.27
4-1/2 x 1/8 x 5/8-11 13,300 -35613 3.06 10 2.62
5 x 1/8 x 7/8 12,300 -35675 1.84 25 1.57 STAINLESS/METAL
5 x 1/8 x 5/8-11 12,300 -35676 3.41 10 2.92 WA24S: White aluminum oxide grain with S-grade bond. Contaminate
7 x 1/8 x 7/8 8,600 -35634 2.66 25 2.27 Free wheel for fast cutting of stainless steel, ferrous metal, food grade,
7 x 1/8 x 5/8-11 8,600 -35635 4.67 10 3.99 and nuclear applications. Contains £ 0.1% iron, sulfur, or chlorine for
9 x 1/8 x 7/8 6,600 -35648 4.10 25 3.51 rust-free and corrosion-free results.
9 x 1/8 x 5/8-11 6,600 -35649 5.50 10 4.70
Our Net Price
STAINLESS/METAL Max. Part No. Box Each
Size RPM 1-602- Each Qty. Box Qty.
WA24S: White aluminum oxide grain with S-grade bond. Contaminate
Free wheel for fast cutting of stainless steel, ferrous metal, food grade, 4-1/2" x 1/4" x 7/8" 13,300 -35673 $2.05 25 $1.75
and nuclear applications. Contains £ 0.1% iron, sulfur, or chlorine for 4-1/2 x 1/4 x 5/8-11 13,300 -35674 3.62 10 3.10
rust-free and corrosion-free results. 5 x 1/4 x 7/8 10,200 -37543 2.55 25 2.18
5 x 1/4 x 5/8-11 10,200 -37531 4.12 10 3.52
Our Net Price 7 x 1/4 x 7/8 8,600 -35677 3.68 25 3.15
Max. Part No. Box Each 7 x 1/4 x 5/8-11 8,600 -35678 5.70 10 4.87
Size RPM 1-602- Each Qty. Box Qty.
4-1/2" x 1/8" x 7/8" 13,300 -35616 $1.68 25 $1.44 ALUMINUM
4-1/2 x 1/8 x 5/8-11 13,300 -35617 3.26 10 2.79
7 x 1/8 x 7/8 8,600 -35638 2.82 25 2.41 A30N: Aluminum oxide grain. Type 27 grinding wheels for aluminum guaranteed
7 x 1/8 x 5/8-11 8,600 -35639 4.83 10 4.13 to outperform competitors. Soft N-grade bond for easy grinding of welding seams,
sprues, and cast iron skin. For aluminum, copper, zinc, and other soft materials.
Our Net Price
METAL/STAINLESS
Max. Part No. Box Each
ZA24T: Zirconia aluminum oxide grain mixture with T-grade bond. High Size RPM 1-602- Each Qty. Box Qty.
performance design for fast cutting and longer life. Excellent cutting of 4-1/2" x 1/4" x 7/8" 13,300 -36107 $3.75 25 $3.21
ferrous metals and stainless steels. 4-1/2 x 1/4 x 5/8-11 13,300 -36108 5.30 10 4.53
5 x 1/4 x 7/8 12,300 -36109 4.75 25 4.06
Our Net Price 5 x 1/4 x 5/8-11 12,300 -36110 6.35 10 5.43
Max. Part No. Box Each 7 x 1/4 x 7/8 8,600 -36111 7.30 25 6.24
Size RPM 1-602- Each Qty. Box Qty. 7 x 1/4 x 5/8-11 8,600 -36112 9.30 10 7.95
4-1/2" x 1/8" x 7/8" 13,300 -35614 $3.20 25 $2.74 9 x 1/4 x 7/8 6,600 -36156 11.05 25 9.45
4-1/2 x 1/8 x 5/8-11 13,300 -35615 4.46 10 3.81 9 x 1/4 x 5/8-11 6,600 -36157 13.05 10 11.16
Flexible Depressed
Center Wheels
Aluminum Blending, finishing and polishing
Oxide stainless steel, aluminum structural Flexible
Abrasives steel, carbon steel, cast iron welds
and burrs.
Depressed
Center Wheels
TYPE 27 TYPE 27
FGF WHEELS -
Flex, Grind, Finish!
FEATURES: TYPE 27
• Aluminum oxide grain in a
uniquely patterned face with FEATURES:
button nubs. Cool cutting; leaves • Waffle pattern on wheel face for
no burn marks. Prevents loading. cooler grinding and longer working life.
• Special formulation. No offensive • Engineered to absorb vibrations
odors generated while grinding. for reduced operator fatigue.
Meets nuclear industry standards; • Recommended for metal, steel,
no contamination of workpiece. stainless steel and non-ferrous metals.
• Flexible. Excellent control of finish
quality and removal rate in light Our Net Price
stock removal applications. Max. Part No. Box Each
Size Grade RPM 1-602- Each Qty. Box Qty.
Our Net Price 4-1/2" x 1/8" x 7/8" WA46-Q-B 13,300 -36265 $3.15 25 $2.69
Max. Part No. Box Each 4-1/2 x 1/8 x 5/8-11 WA46-Q-B 13,300 -36266 4.75 10 4.06
Size Grade RPM 1-632- Each Quantity Box Qty. 5 x 1/8 x 7/8 WA46-Q-B 12,250 -36267 3.60 25 3.08
4-1/2" x 1/8" x 7/8" A60 - Medium 13,580 -67289 $5.30 20 $4.53 5 x 1/8 x 5/8-11 WA46-Q-B 12,250 -36268 5.20 10 4.45
7 x 1/8 x 5/8-11 A60 - Medium 8,600 -67287 9.48 10 8.11 7 x 1/8 x 7/8 WA46-Q-B 8,600 -36269 5.70 25 4.87
7 x 1/8 x 7/8* A60 - Medium 8,600 -67288 6.98 20 5.97 7 x 1/8 x 5/8-11 WA46-Q-B 8,600 -36270 7.70 10 6.58
* WHILE SUPPLIES LAST.
TYPE 1
Cut-Off
Wheels
TYPE 1 ZIRCONIA PREMIUM
ZA: Zirconia Aluminum Oxide - Metal, steel and
HIGH SPEED REINFORCED stainless. Longer lasting life and easy cutting action.
Our Net Price
A: Aluminum Oxide; Metal & Steel
Max. Part No. Box Each
Our Net Price Size Grade RPM 1-602- Each Qty. Box Qty.
Max. Part No. Box Each 3" x 1/32" x 1/4" ZA60-T-BF 23,900 -36175 $1.67 50 $1.43
Size Grade RPM 1-602- Each Qty. Box Qty. 3 x 1/32 x 3/8 ZA60-T-BF 23,900 -36176 1.67 50 1.43
1-1/2" x 1/32" x 1/4" A60-RBF 45,000 -35687 $1.00 50 $.86 3 x 1/16 x 1/4 ZA36-T-BF 23,900 -36173 1.72 50 1.47
1-1/2 x 1/16 x 1/4 A60-RBF 45,000 -35688 1.02 50 .87 3 x 1/16 x 3/8 ZA36-T-BF 23,900 -36174 1.72 50 1.47
2 x 1/32 x 3/8 A60-RBF 30,000 -35689 1.00 50 .86 4 x 1/32 x 1/4 ZA60-T-BF 19,100 -36179 1.95 50 1.67
2 x 1/16 x 3/8 A60-RBF 30,000 -35690 1.02 50 .87 4 x 1/32 x 3/8 ZA60-T-BF 19,100 -36180 1.95 50 1.67
2 x 1/8 x 3/8 A24-RBF 30,000 -35691 1.12 50 .96 4 x 1/16 x 1/4 ZA36-T-BF 19,100 -36177 2.28 50 1.95
3 x 1/32 x 1/4 A60-RBF 25,000 -35500 .91 50 .78 4 x 1/16 x 3/8 ZA36-T-BF 19,100 -36178 2.28 50 1.95
3 x 1/32 x 3/8 A60-RBF 25,000 -35501 .91 50 .78
3 x 1/16 x 1/4 A36-RBF 25,000 -35502 .93 50 .80
3 x 1/16 x 3/8 A36-RBF 25,000 -35503 .93 50 .80 FAST CUT
3 x 1/16 x 1/4 A60-RBF 25,000 -45085 .93 50 .80
3 x 1/16 x 3/8 A60-RBF 25,000 -45086 .93 50 .80 A: Aluminum Oxide Grain - Economical choice
3 x 1/8 x 1/4 A24-RBF 25,000 -35504 1.03 50 .88 for metal, steel and general applications.
3 x 1/8 x 3/8 A24-RBF 25,000 -35505 1.03 50 .88
4 x 1/32 x 1/4 A60-RBF 19,000 -35506 1.14 50 .97 Our Net Price
4 x 1/32 x 3/8 A60-RBF 19,000 -35507 1.14 50 .97 Max. Part No. Box Each
4 x 1/16 x 1/4 A36-RBF 19,000 -35508 1.26 50 1.08 Size Grade RPM 1-602- Each Qty. Box Qty.
4 x 1/16 x 3/8 A36-RBF 19,000 -35509 1.26 50 1.08
4 x 1/16 x 3/8 A60-RBF 19,000 -45087 1.26 50 1.08 3" x 1/32" x 1/4" A60-R-BF 23,900 -59102 $.67 50 $.57
4 x 1/16 x 1/4 A60-RBF 19,000 -45088 1.26 50 1.08 3 x 1/32 x 3/8 A60-R-BF 23,900 -59103 .67 50 .57
4 x 1/16 x 5/8 A36-RBF 19,000 -35510 1.26 50 1.08 3 x 1/16 x 1/4 A36-R-BF 23,900 -59104 .67 50 .57
4 x 1/8 x 1/4 A24-RBF 19,000 -35511 1.40 50 1.20 3 x 1/16 x 3/8 A36-R-BF 23,900 -59105 .67 50 .57
4 x 1/8 x 3/8 A24-RBF 19,000 -35512 1.40 50 1.20 4 x 1/32 x 1/4 A60-R-BF 19,100 -59106 .88 50 .75
4 x 1/8 x 5/8* A24-RBF 19,000 -35513 1.40 50 1.20 4 x 1/32 x 3/8 A60-R-BF 19,100 -59107 .88 50 .75
4 x 1/16 x 3/8 A36-R-BF 19,100 -59108 .88 50 .75
* WHILE SUPPLIES LAST.
TYPE 1 TYPE 27
CARBO FEATURES:
• Extra thin. Low kerf loss.
METAL • Quality aluminum oxide abrasive. Quick cutting action.
• Low initial cost per wheel. Ideal for on-site and small-unit jobs.
Reinforced Cut-Off
Wheels FOR STATIONARY MACHINES
Stationary Saw Zirconia
Cut-Off Wheels Aluminum
TYPE 1 Abrasives
FEATURES:
Stationary saw cut-off wheels cut • Premium, zirconia alumina
structural steel, bar stock, tubing abrasive. Fastest cut rate on
and non-ferrous metals. TYPE 1 steel/metal. Ideal for cutting
A: Aluminum Oxide stainless and high alloy steels.
• Resin bond. Works best on dry
Our Net Price
cuts. Most free cutting. Longest
Max. Part No. Box Each wheel life. Greatest productivity.
Size Grade RPM 1-602- Each Qty. Box Qty. • High-strength, externally reinforced
10" x 1/16" x 5/8" A24-R-BF 6,110 -35577 $5.04 10 $4.31 construction. Resists breakage
10 x 1/8 x 5/8 A24-R-BF 6,110 -35579 5.25 10 4.49 and provides straight cuts.
10 x 1/8 x 1 A24-R-BF 6,110 -35580 5.25 10 4.49
Our Net Price
12 x 1/8 x 1 A24-R-BF 5,110 -35581 5.36 10 4.58
14 x 1/8 x 1 A24-R-BF 4,400 -35582 5.85 10 5.00 Max. Part No. Box Each
Size Grade RPM 1-632- Each Quantity Box Qty.
16 x 5/32 x 1 A24-R-BF 3,820 -35584 13.70 10 11.71
18 x 5/32 x 1* A24-R-BF 3,300 -35585 26.80 10 22.91 10" x 3/32" x 5/8 2ZA30-TB35FW 6,110 -07057 $14.88 10 $12.72
20 x 5/32 x 1* A24-R-BF 3,100 -35586 28.95 10 24.75 12 x 1/8 x 1* 2ZA30-TB35FW 5,095 -07058 16.21 10 13.86
20 x 7/32 x 1 A30R-B-BF 3,100 -35851 44.05 10 37.66 14 x 1/8 x 1 2ZA30-TB35FW 4,365 -07059 25.03 10 21.40
16 x 5/32 x 1* 2ZA30-TB35FW 3,820 -07060 31.12 10 26.61
* WHILE SUPPLIES LAST. 20 x 5/32 x 1 2ZA30-TB35FW 2,710 -07061 54.02 10 46.19
FAST CUT - Economical choice for metal, steel and general applications. * WHILE SUPPLIES LAST.
Our Net Price Aluminum TYPE 1
Max. Part No. Box Each Oxide
Size Grade RPM 1-602- Each Qty. Box Qty.
Abrasives
10" x 1/8" x 5/8" A24-R-BF 6,110 -70111 $3.38 10 $2.89
12 x 1/8 x 1 A24-R-BF 5,100 -70105 3.92 10 3.35 FAST CUT
14 x 1/8 x 1 A24-Q-BF 4,400 -36233 4.29 10 3.67
Our Net Price
16 x 5/32 x 1 A24-R-BF 3,820 -70106 7.65 10 6.54
18 x 5/32 x 1 A24-R-BF 3,400 -70107 12.25 10 10.47 Max. Part No. Box Each
20 x 5/32 x 1 A24-R-BF 3,100 -70108 17.10 10 14.62 Size Grade RPM 1-632- Each Quantity Box Qty.
20 x 3/16 x 1 A24-R-BF 3,100 -70109 19.25 10 16.46 10" x 3/32" x 5/8" A30-RBFW 6,110 -09216 $8.50 10 $7.27
Circular Saw
Cut-Off Wheels
TYPE 1
Precision Toolroom
Cut-Off Wheels Toolroom
TYPE 1 Cut-Off
Wheels
TYPE 1
Reinforced
Aluminum
Non-Reinforced Toolroom Cut-Off Wheels Oxide
Used on stationary grinders (bench or surface). Applications that
require twisting or lateral stresses must use a reinforced wheel.
Our Net Price Reinforced cut-off wheel FEATURES:
are designed to resist • Aluminum oxide abrasive. Fast cut rate and long life.
Max. Part No. Box Each • Resin bond. Free cutting action. Burn-free cutting.
Size Grade RPM 1-602- Each Qty. Box Qty. breakage caused by
severe cross-bending • High strength, reinforced construction. Resists
7" x 1/32" x 1-1/4" A60-M8-B2 6,550 -35529 $3.45 50 $2.95 breakage and provides straight cuts.
7 x 1/16 x 1/2 A60-M8-B2 6,550 -35530 3.55 50 3.04 and are required on any
operation where the work • BTFK - side reinforced, rough sides. Maximum
7 x 1/16 x 1-1/4 A60-M8-B2 6,550 -35532 3.55 50 3.04 cut rate. Very narrow cuts; minimum kerf loss.
7 x 3/32 x 1-1/4 A60-M8-B2 6,550 -35535 2.92 50 2.50 is not securely clamped.
7 x 1/8 x 1-1/4 A60-M8-B2 6,550 -35539 4.22 50 3.61
8 x 1/32 x 1-1/4* A60-M8-B2 5,729 -35542 3.27 50 2.80
8 x 1/16 x 1-1/4 A60-M8-B2 5,729 -35545 4.29 50 3.67 Our Net Price
8 x 1/8 x 1-1/4 A60-M8-B2 5,729 -35550 4.85 50 4.15 Part No. Box Each
10 x 1/16 x 5/8 A60-M8-B2 4,584 -35551 50 Size Grade 1-632- Each Quantity Box Qty.
6.40 5.47
7" x .035" x 5/8" A60-OBFTK -09197 $12.41 10 $10.61
7 x .035 x 1-1/4 BA60-OBFTK -09196 13.70 10 11.71
Reinforced Toolroom Cut-Off Wheels 7 x .060 x 5/8 A60-OBFTK -09195 12.41 10 10.61
Used on stationary grinders (bench or surface). Designed and manufactured 7 x .060 x 1-1/4 BA60-OBFTK -09194 13.70 10 11.71
8 x .035 x 5/8 A60-OBFTK -01911 14.73 10 12.59
to tight tolerances, the fiberglass reinforcement adds extra strength. 8 x .060 x 5/8 A60-OBFTK -01912 14.73 10 12.59
Our Net Price 8 x .060 x 1-1/4 A60-OBFTK -09192 14.73 10 12.59
Max. Part No. Box Each
Size Grade RPM 1-602- Each Qty. Box Qty. Non-Reinforced Aluminum Oxide Abrasives
6" x .040" x 1/2* A60-O/P-BF 10,186 -35555 $2.79 50 $2.39
6 x .060 x 1/2* A60-O/P-BF 10,186 -35558 2.79 50 2.39 FEATURES: Non-reinforced cut-off wheels are
6 x .060 x 5/8 A60-O/P-BF 10,186 -35559 2.79 50 2.39 • Aluminum oxide abrasive. designed for use on “fixed-base” types
6 x .060 x 1-1/4* A60-O/P-BF 10,186 -35560 2.79 50 2.39 Fast cut rate and long life. of machines where the work is securely
7 x .040 x 1/2* A60-O/P-BF 8,732 -35561 3.60 50 3.08 • Resin bond. Free cutting action. clamped, guarded, and where the wheel
7 x .040 x 5/8* A60-O/P-BF 8,732 -35562 3.38 50 2.89 Burn-free cutting. Long life. operates on a controlled cutting plane.
7 x .040 x 1-1/4 A60-O/P-BF 8,732 -35563 3.47 50 2.97
7 x .060 x 1/2* A60-O/P-BF 8,732 -35564 3.38 50 2.89
7 x .060 x 1-1/4 A60-O/P-BF 8,732 -35566 3.47 50 2.97 Our Net Price
8 x .040 x 5/8* A60-O/P-BF 7,646 -35568 4.31 50 3.69 Part No. Box Each
8 x .040 x 1-1/4 A60-O/P-BF 7,646 -35569 4.38 50 3.74 Size Grade 1-632- Each Quantity Box Qty.
8 x .060 x 1/2* A60-M8-BF 7,646 -35570 4.31 50 3.69 6" x 1/16" x 1-1/4" A60-OB5SW -09188 $10.30 10 $8.81
8 x .060 x 5/8 A60-M8-BF 7,646 -35571 4.38 50 3.74 7 x 1/32 x 1-1/4 A60-OB5SW -09187 11.59 10 9.91
8 x .060 x 3/4* A60-M8-BF 7,646 -35899 4.31 50 3.69 7 x 1/16 x 1-1/4 A60-OB5SW -09184 11.59 10 9.91
8 x .060 x 1-1/4 A60-M8-BF 7,646 -35572 4.38 50 3.74 8 x 1/16 x 1-1/4 A46-OB5SW -09183 12.93 10 11.06
* WHILE SUPPLIES LAST. 10 x 1/16 x 5/8 A60-OB5SW -09181 17.72 10 15.15
WAVY TEETH - A unique design featuring tooth spacing MULTI-KUT® - Known as the world's most versatile BLACK MAXI-SHARP® - The Premium line
similar to a variable tooth hacksaw blade (coarse - to fine - file because it combines the uses of flat and mill of hand files! Specially treated with a black
to extra fine) that enables material to be removed faster files. The coarse teeth allow material to be removed oxide coating, Simonds Black Maxi-Sharp®
while providing a smoother finish without “chattering”. fast (like a flat file) and the double chip-breaker files last longer due to increased resistance
Files will last longer due to this unique feature. design generates a smooth finish (like a mill file). to loading and rust.
File
Sets 9 Piece 10" 10 Piece All Purpose Set
General Purpose Set 1 - 10" Flat Bastard with Handle
1 - 10" Flat Bastard with Handle 1 - 10" Flat Second Cut with Handle
5 Piece 8" General 1 - 10" Half Round Bastard with Handle 1 - 10" Half Round Bastard with Handle
1 - 10" Round Bastard with Handle
Purpose Set 1 - 10" Mill Bastard with Handle
1
1
-
-
10" Half Round Second Cut with Handle
10" Round Bastard with Handle
1 - 8" Mill Bastard with Handle 1 - 10" Square Bastard with Handle 1 - 10" Round Second Cut with Handle
1 - 8" Round Bastard with Handle 1 - 10" Flat Smooth with Handle 1 - 10" Square Bastard with Handle
1 - 8" Square Bastard with Handle 1 - 7" Slim Taper with Handle 1 - 10" Square Second Cut with Handle
1 - 8" Half Round Bastard with Handle 1 - 10" Hobby Rasp 1 - 6" Knife Bastard with Handle
1 - 8" Flat Multi-Kut with Handle 1 - File Card 1 - 6" Knife Second Cut with Handle
FEATURES:
• Single cut on FEATURES:
edge and sides. • Double-cut on sides,
• File tapers toward Very adaptable file that can be used for a multitude of single-cut on edges. Used primarily by machinists, in factories or whenever
the point for detail. applications such as sharpening various types of tools • File tapers toward rapid stock removal is desired. Simonds Flat Files
• Two square edges. and saws, draw filing, lathe work and general shop use. the point for detail. feature an exclusive "wavy tooth" design.
BASTARD CUT BASTARD CUT
Per Part No. Our Net Part No. Our Net Part No. Our Net Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-050- Price Ea. 1-552- Price Ea. 1-552- Price Ea. Size Box 4-030- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
4" 12 -041 $.95 -07531 $3.75 -08243 $4.90 4" 12 -041 $.95 -07951 $5.30 -03367 $6.90
6 12 -061 .95 -07532 3.75 -08354 4.90 6 12 -061 1.20 -07952 5.55 -03467 7.25
7 12 – – -07533 4.42* – – 8 12 -081 1.60 -07953 6.90† -03566 9.05
8 12 -081 1.60† -07534 4.55 -08497 5.95 10 6 -101 2.10 -07954 8.50 -03665 11.15
10 12 -101 2.05 -07535 5.80 -08642 7.60 12 6 -121 2.95 -07955 11.65 -03764 15.25
12 6 -121 3.20 -07536 9.45 -08737 12.40 14 6 -141 3.80 -07956 16.05 -03863 21.05
14 6 -141 4.10 -07537 12.75 -08832 16.70 16 6 – – -07957 18.92* -03980 27.75
16 6 – – -07538 15.93* -08925 22.00
SECOND CUT
SECOND CUT
SMOOTH CUT
SMOOTH CUT
Per Part No. Our Net Part No. Our Net Part No. Our Net
Per Part No. Our Net Part No. Our Net Part No. Our Net Size Box 4-030- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
Size Box 4-050- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
4" 12 -043 $1.05 -07971 $6.55 -03434 $8.60
4" 12 -043 $1.00 -07551 $5.70 -08306 $7.50 6 12 -063 1.10 -07972 7.00 -03533 9.15
6 12 -063 1.10 -07552 5.80 -08416 7.60 8 12 -083 1.80 -07973 8.05 -03632 10.60
8 12 -083 1.75† -07554 6.80 -08560 8.95 10 6 -103 2.50 -07974 10.80† -03731 14.15
10 12 -103 2.25 -07555 8.35 -08704 10.95 12 6 -123 3.40 -07975 14.60 -03830 19.15
12 6 -123 3.55 -07556 11.30 -08799 14.85 14 6 -143 5.15 -07976 19.35* -03929 26.50
14 6 -143 4.93 -07557 15.65 -08894 23.30 16 6 -163 5.99* – – – –
Long Angle Rapid, free cutting single-cut files used for finish
lathe work on either hard or soft metals.
Square
FEATURES:
Lathe Files Files • Double cut.
• Tapered slightly
towards point.
FEATURES:
• Made on BASTARD CUT Another file ideal for slots & keyways. In addition,
flat blanks. it works great on square holes and other general
• Safe edges surface filing. Simonds' Square Files feature an
to protect exclusive "Wavy Tooth" design.
shoulder or dog. Per Part No. Our Net Part No. Our Net
• Cut faster than Size Box 1-552- Price Ea. 1-552- Price Ea.
regular mill 10" 6 -08081 $11.20 †
-07657 $14.70 BASTARD CUT
files and leave 12 6 -08082 15.10 -07688 19.85
smoother finish. 14 6 -08083 20.35 -07719 26.75
†
12 PER BOX. Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-010- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
4" 12 -041 $.95* -08651 $5.90 – –
6 12 -061 1.05 -08652 6.15 -12967 8.05
8 12 -081 1.60† -08653 6.95* -13081 9.50
10 12 -101 2.65 -08654 9.20* -13196 12.60
12 6 -121 2.80 -08655 12.95* -13310 17.85
All-Purpose 14 6 -141 3.60 -08656 16.50* -13425 23.50
Very useful for a wide range of filing
Files applications because it has a different cut SECOND CUT
on each side. On one side, the double cut
Bastard is for hogging off material quickly. * WHILE
Per Part No. Our Net The other side has a single cut for a
Size Box 1-552- Price Ea. Per Part No. Our Net Part No. Our Net SUPPLIES
smoother finish. One safe (uncut) edge Size Box 1-552- Price Ea. 1-552- Price Ea.
8" 12 -07831 $8.25 for shoulder filing with a built-in handle, LAST.
10 12 -07832 9.95 provides maximum versatility. 4" 12 -08661 $6.30 – –
6 12 -08662 6.90 -13000 9.05
8 12 -08663 8.25 -13114 10.80 †
6 PER BOX.
10 12 -08664 11.05 -13229 14.50
Handy Files 12 6 – – -13343 20.05
SMOOTH CUT
FEATURES: Per Part No. Our Net Part No. Our Net Part No. Our Net
• Rectangular shape. Size Box 4-010- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
• One cut edge, one safe edge.
• Length measured exclusive of handle. 4" 12 -043 $1.35* -08671 $6.90 – –
Per Part No. Our Net 6 12 -063 1.25 -08672 6.48* -13033 9.50
• One side is single-cut for use in tool 8 12 -083 1.70† -00001 9.10 -13147 11.95
Size Box 1-552- Price Ea.
sharpening and smoothing metal 10 12 -103 3.20 -08674 10.56* -13262 15.60
surfaces, other side is double-cut for 8" 12 -06602 $10.80 12 6 -123 3.80 – – -13376 21.95
general filing and rapid stock removal. 12 6 -06686 16.90 14 6 -143 3.82* – – – –
I/O CLEAR
GREY MIRROR Lens Part No. Our
Description 1-711- Net Price
+1.5 diopter -K3H15 $10.45
+2.0 diopter -K3H20 10.45
Clear Lens w/ +2.5 diopter -K3H25 10.45
Black Frames
Used for angles less than 90° for cleaning corners, filing cutters
and taps. The triangular shape (each side at 60° angles from one Shaped like a knife blade as the name indicates.
another) enables this file to get into corners the others cannot. Commonly used on slots, keyways and acute
Simonds’ Three Square Files feature an exclusive "Wavy Tooth". angles. Simonds' Knife File features an exclusive
"Wavy Tooth" design.
BASTARD CUT
BASTARD CUT
Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-025- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
Per Part No. Our Net Part No. Our Net Part No. Our Net
4" 12 -041 $1.45* – – – – Size Box 4-035- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
6 12 -061 1.50 -08969 7.65 -15925 9.60
8 12 -081 1.70† -08970 8.75* -16036 11.45 4" 12 -041 $2.35 -08929 $9.00 -06711 $12.90
10 12 -101 2.20 -08971 10.85* -16147 14.30 6 12 -061 2.35 -08930 10.30 -06804 14.70
12 6 -121 2.90* – – – – 8 12 -081 2.65† -08931 12.30 -06898 17.55
14 6 -141 5.10* – – – – 10 12 -101 3.95† -08932 13.90* -06992 20.70
16 6 -161 5.65* – – – – 12 12 -121 5.85 * – – – –
SECOND CUT
SECOND CUT
* WHILE
SUPPLIES * WHILE
Per Part No. Our Net Part No. Our Net
Size Box 1-552- Price Ea. 1-552- Price Ea. LAST. Per Part No. Our Net Part No. Our Net SUPPLIES
Size Box 1-552- Price Ea. 1-552- Price Ea. LAST.
6" 12 -08975 $8.60 -15958 $10.80
8 12 -08976 9.90* -16069 13.05 4" 12 -08934 $9.55 -06742 $13.60
10 12 -08977 12.35 -16180 15.55 †
6 PER BOX. 6 12 -08935 11.75 -06836 16.30
8 12 -08936 13.30 -06930 19.00 †
6 PER BOX.
10 12 -08937 16.70 -07023 23.80
SMOOTH CUT
SMOOTH CUT
Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-025- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
Per Part No. Our Net Part No. Our Net Part No. Our Net
4" 12 -043 $1.45* – – – – Size Box 4-035- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
6 12 -063 1.50 -08981 8.75 -15991 10.95
8 12 -083 1.70† -08982 10.90 -16102 13.75 4" 12 -043 $2.25 -08939 $9.85 -06773 $14.10
10 12 -103 2.20 -08983 12.50* -16213 16.45 6 12 -063 2.25 -08940 12.70 -06867 18.15
12 6 -123 2.90* – – – – 8 12 -083 3.15† -08941 13.85 -06961 19.75
14 6 -143 5.10* – – – – 10 12 -103 4.50† -08942 16.95* -07054 25.25
16 6 -163 5.65* – – – – 12 12 -123 6.00 * – – – –
REGULAR TAPER
SLIM TAPER EXTRA SLIM TAPER
JB Part No.
72 Towel Bucket
Part No. -
®
J-B Weld
1-441-8265
1-485-4227072 Cold Weld Our Net Price
Waterless Our Net Price Compound
Hand Cleaner $510
$1442
Towels FEATURES:
• A remarkably easy, convenient,
FEATURES: and inexpensive alternative to
• Unique waterless hand cleaning system welding, soldering, and brazing.
combining both a high quality, liquid hand • Will set in 4-6 hours, and cure in 16-24 hours.
cleaner formula, and a heavy-duty, • Waterproof, petroleum, chemical, and acid
non-scratching, abrasive hand-cleaning resistant when fully cured. It can be drilled,
towel with proven pumice performance. tapped, machined, filed, sanded, and painted.
• Loosens, dissolves & absorbs dirt, grease, • Superstrong, nontoxic, and
oil, paint, adhesive, tar, caulk & more. temperature resistant up to 600°F.
FEATURES:
• Double-cut.
SIMONDS files feature a built-in “twist & roll” action on the • Primarily used to enlarge and round out
half round side. It leaves a super smooth finish on concave circular openings or concave surfaces.
surfaces, while allowing a more natural filing motion in use. • File tapers toward the point making it
The flat side is Multi-Kut® for a wider range of applications. adaptable on numerous size holes.
BASTARD CUT
BASTARD CUT
Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-015- Price Ea. 1-552- Price Ea. 1-552- Price Ea. Per Part No. Our Net Part No. Our Net Part No. Our Net
4" 12 -041 $1.25 -08291 $8.00 -04695 $10.50 Size Box 4-020- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
6 12 -061 1.40 -08292 8.30 -04795 10.85 4" 12 -041 $.80 -08521 $4.60 -11526 $5.80
8 12 -081 2.05 -08293 10.05† -04896 13.15 6 12 -061 .90 -08523 4.60 -11716 5.80
10 6 -101 2.55 -08294 12.50 -04995 16.40 8 12 -081 1.40† -08525 5.30 -11904 6.65
12 6 -121 3.55 -08295 16.05 -05094 21.05 10 12 -101 1.90 -08526 6.85 -12019 8.60
14 6 -141 5.35 -08296 19.95* -05194 27.40 12 6 -121 2.55 -08527 9.40 -12134 11.90
16 6 -161 8.75* -08297 24.37* -05307 35.85 14 6 -141 3.40 -08528 12.08* -12248 16.95
SECOND CUT
SECOND CUT
Per Part No. Our Net Part No. Our Net * WHILE * WHILE
Size Box 1-552- Price Ea. 1-552- Price Ea. SUPPLIES Per Part No. Our Net Part No. Our Net
Size Box 1-552- Price Ea. 1-552- Price Ea. SUPPLIES
4" 12 -08301 $8.90 -04729 $11.65 LAST. LAST.
6 12 -08302 9.45 -04828 12.40 4" 12 -08531 $5.05 -11559 $6.35
8 12 -08303 11.15 -04927 14.60 6 12 -08533 5.25 -11748 6.65
10 6 – – -05026 17.85 8 12 -08535 6.15 -11936 7.70
12 6 -08305 17.45 -05125 22.90
†
12 PER BOX. 10 6 -08536 8.10 -12051 10.10 †
6 PER BOX.
14 6 -00002 21.55 -05225 29.55 12 6 -08537 10.75 -12166 13.55
SMOOTH CUT
SMOOTH CUT
Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-015- Price Ea. 1-552- Price Ea. 1-552- Price Ea. Per Part No. Our Net Part No. Our Net Part No. Our Net
Size Box 4-020- Price Ea. 1-552- Price Ea. 1-552- Price Ea.
4" 12 -043 $1.70 -08311 $9.35 -04762 $12.25
6 12 -063 1.65 -08312 9.80 -04861 12.85 4" 12 -043 $1.10 -08541 $5.50 -11592 $7.00
8 12 -083 2.70 -08313 11.90 -04960 15.65 6 12 -063 1.10 -08542 5.75 -11781 7.25
10 6 -103 3.10 -08314 14.95† -05059 18.70 8 12 -083 1.80 -08543 6.85 -11969 8.60
12 6 -123 4.20 -08315 17.60* -05158 24.10 10 6 -103 2.20 -08544 8.80 -12084 11.15
14 6 -143 7.85 -08316 21.71* -05258 31.90 12 6 -123 2.80 -08545 11.20* -12199 14.80
16 6 – – – – – – 14 6 -143 4.35 – – – –
FEATURES:
• Tapered point in width. Per Part No. Our Net
• Used by machinists as an all-purpose file to Size Box 1-552- Price Ea.
remove stock rapidly and to leave a smooth finish.
• File features a pattern of narrow chip 8" 12 -07894 $9.95
breakers created by steep and angled 10 6 -07917 12.80
12 6 -07941 17.15
serrations for rapid removal and smoother finish. 14 6 -07965 23.05
FEATURES:
File Handles • Waxed white birch
handles shaped to fit
the hand comfortably.
• Ferrules heavy gauge
steel, bright zinc plated.
Black
Maxi-Sharp®
Files
File Not
Included.
Ergonomic
File Handle
Adjustable
File & Tool
Holders FEATURES:
• Eliminates fatigue,
Holds files, tang-handled tools, hack saw blades, discomfort and stressors.
reamers, etc. Exclusive self-equalizing hardened Part No. 1-805-890 • Grooved surface provides
steel jaws grip the entire length of the inserted tang, Our Net Price a perfect non-slip grip.
providing a firm grip. Large, quick adjusting, knurled • Comfortable production filing. Fits Part No. Our
knob assures easy, positive locking. $635 • Incorporates natural wrist angle File 1-391- Net Price
of approximately 35 degrees. 4" -70561 $19.65
• Allows the operator to rotate the 6" to 8" -70562 19.65
arm slightly to change the angle of 10" to 12" -70563 19.65
the file, and still apply the necessary 14" -70564 19.65
8" File Card Used for general
cleaning of file teeth.
pressure to keep the file in contact
with the work piece. WHILE SUPPLIES LAST.
Part No.
1-611-005
Our Net Price Chip
$510 Brushes
Combination Used on
EPOXY BRUSH PURE
WHITE BRISTLE
File Card & Brush finer cut files.
Single thick. Flat trim. Bright 144 Chip Brush
metal ferrule. Plain wood handle. Assortment
Includes:
(36) 1/2",(36) 1",
Box Qty. Pricing (36) 1-1/2",
Brush Part No. Our Net Box Part No. Our (24) 2" & (12) 3".
Width 1-613- Price/Ea. Qty. 1-613- Net Price
Part No. Part No. 1-613-746
1/2" -740 $.33 36 -740B $9.50
1-611-010 1 -741 .42 36 -741B 12.10 Our Net Price
Our Net Price 1-1/2 -742 .51 36 -742B 14.69
$1040
2
3
-743
-745
.60
.95
24
12
-743B
-745B
11.52
9.12
$4856
Individual
Needle Files
Used for applications similar to the larger tanged files
and for production work on small electronic parts. 12 Pc.
Needle files provide excellent detail work capabilities. Needle File
Cut No. 0 (Coarse) Cut No. 2 (Medium)
Sets
Part No. Our Part No. Our
FLAT Description Length 1-552- Net Price 1-552- Net Price
Flat 5-1/2" -8349500 $10.55 -8349550 $10.55
HALF ROUND 6-1/4 -8352400 11.50 -8352450 12.00
Half-Round 5-1/2 -8349700 11.00 -8349750 11.00
6-1/4 -8352600 11.50 -8352650 12.00 Each assortment contains
Equaling 5-1/2 -8350550 10.55 -8350600 11.00 the twelve most popular shapes (three-square,
EQUALING round edge, marking, slitting, knife, barrette, half round,
6-1/4 -8353450 12.00 -8353500 11.50
round, square, flat, crossing, equalling) packaged in a
Round 5-1/2 -8350100 11.00 -8350150 11.00 vinyl sleeve.
ROUND 6-1/4 -8353000 12.00 -8353050 12.00
Part No. 1-552- Our
Square 5-1/2 -8349900 10.55 -8349950 10.55
6-1/4 -8352800 11.50 -8352850 12.00 Cut No.0 Cut No.2 Net Price
SQUARE Length (Coarse) (Medium) (Per Set)
Three Square 5-1/2 -8351000 11.00 -8351050 11.00
6-1/4 -8353850 12.00 -8353900 12.00 5-1/2" -12412 -12422 $131.70
6-1/4 -12413 -12423 143.85
THREE SQUARE WHILE SUPPLIES LAST.
SSR-1
DSR-4
SSR-2
DSR-5
7" SSR-3
6" Die DSR-6 Silver- SSR-4
Sinkers' smiths' SSR-5
DSR-7
Riffler Riffler SSR-6
Files DSR-8
Files SSR-7
DSR-9 SSR-8
SSR-9
DSR-11
SSR-10
WHILE
WHILE DSR-15 SUPPLIES SSR-11
SUPPLIES LAST. SSR-12
LAST. DSR-18
Ideal for making glass molding dies. Different from die-sinkers rifflers in that
these have longer middle sections and wider ends. Safe (uncut) middle sections
for comfortable handling. Twelve different shapes and sections are available.
Used primarily by die-sinkers, jewelers and instrument manufacturers. NIne
different shapes and sections are available. The middle sections are safe
Part No. Our Part No. Our
(uncut) for comfortable handling. Slender stock and narrow ends maximize Shape Cut 1-552- Net Price Shape Cut 1-552- Net Price
detail working. Each design offers its own distinct advantage.
SSR-1 0 -84762010 $30.61 SSR-7 0 -84761010 $30.61
2 -84762200 30.61 2 -84761200 30.61
SSR-2 0 -84750000 30.61 SSR-8 2 -84781200 30.61
Part No. Our Part No. Our 2 -84750200 30.61
Shape Cut 1-552- Net Price Shape Cut 1-552- Net Price SSR-9 0 -84713000 30.61
SSR-3 0 -84741000 30.61 2 -84713200 30.61
DSR-4 0 -84963000 $22.55 DSR-8 2 -84964200 $22.55 2 -84741200 30.61 SSR-10 0 -84711000 30.61
2 -84963200 22.55 DSR-9 2 -84982200 22.55 SSR-4 0 -84764010 30.61 2 -84711200 30.61
DSR-5 0 -84955000 22.55 DSR-11 0 -84961000 22.55 2 -84764200 30.61 SSR-11 0 -84731010 30.61
2 -84955200 22.55 2 -84961200 22.55 SSR-5 0 -84771000 30.61 2 -84731200 30.61
DSR-6 2 -84956200 22.55 DSR-15 0 -84973000 22.55 2 -84771200 30.61 SSR-12 0 -84732000 30.61
DSR-7 0 -84965000 22.55 2 -84973200 22.55 SSR-6 0 -84763010 30.61 2 -84732200 30.61
2 -84965200 22.55 DSR-18 0 -84972000 22.55 2 -84763200 30.61
Diamond Plated Needle Files 1/8" SHANK 5 Pc. Diamond 5-3/4" Overall Length,
2-3/4" Diamond Section
Needle File Set
2-3/4"
5-1/2"
100 Grit 150 Grit 220 Grit
Part No. Our Part No. Our Part No. Our
Description 1-640- Net Price 1-640- Net Price 1-640- Net Price
Equaling -1541 $9.80 -1542 $9.80 -1543 $9.80
Knife -1551 9.80 -1552 9.80 -1553 9.80
Slitting -1561 9.80 -1562 9.80 -1563 9.80
3-Square -1571 9.80 -1572 9.80 -1573 9.80
Square -1581 9.80 -1582 9.80 -1583 9.80
Round -1591 9.80 -1592 9.80 -1593 9.80
Half Round -1601 9.80 -1602 9.80 -1603 9.80 ASSORTMENT INCLUDES:
Barrette -1611 9.80 -1612 9.80 -1613 9.80
Crossing -1621 9.80 -1622 9.80 -1623 9.80 1 - Equaling 1 - Square
Crochet* -1631 9.80 – – – – 1 - Half Round 1 - Three Square
Warding* -1641 9.80 -1642 9.80 -1643 9.80 1 - Round
Pippin* -1651 9.80 -1652 9.80 – –
* WHILE SUPPLIES LAST. Coarse Grit Medium Grit Fine Grit
Part No. 1-640-000 Part No. 1-640-005 Part No. 1-640-010
Diamond Our Net Price Our Net Price Our Net Price
Needle $1250 $1250 $1250
Files
Indispensible aid for the toolroom.
All purpose hand held tool, useful for Diamond
deburring, notching, dressing and
honing of hard, brittle materials. Needle File Sets
FEATURES:
• Nickel alloy matrix.
• Single layer of abrasive. ROUND CROSSING
• Particle exposure.
• Tough, durable bond. HALF ROUND SLITTING
• Aggressive cutting action.
6 Piece Kit SQUARE BARRETTE
5-3/4
Part No. 1-632-92288
2-3/4 THREE-SQUARE JOINT
Our Net Price
65 FLAT/WARDING PIPPIN
$190
KNIFE HAND
Part No. Our
Shape Dimensions Grit 1-632- Net Price
100 -92282 $35.30 Gunsmiths, tool and die makers, jewelers, and stockmakers all rely on needle
Flat .055 x .190 files to get the job done. EZE-LAP offers 12 different shapes of files, in two
Half Round .075 x .210 100 -92286 35.30
100 -92284 35.30 durable,efficient grits. Each set comes complete with 6 files and plastic pouch
Triangle .145 x .145
Square .100 x .100 100 -92283 35.30
Round .120 100 -92285 35.30 Fine 600 Grit Coarse 250 Grit
Part No. Our Part No. Our
File Shapes Included In Sets 1-609- Net Price 1-609- Net Price
Round, Square, Three-Square, Half
Diamond Round, Flat/Warding, Knife
-600F $39.60 -600C $45.10
Needle/Riffler
Size
Part No. 1-640-
Our
File Handle
Description Inches 150 Grit 220 Grit Net Price
Square 1/8 -1272 -1273 $16.40
Flat 1/4 x 1/8 -1282 -1283 16.40
Flat* 1/4 x 1/8 -1292 -1293 16.40 File handles help you get a firm grip
Flat 3/8 x 1/8 -1302 -1303 16.40 on those sensitive filing projects. Part No. 4-130-000
Flat* 3/8 x 1/8 -1312 -1313 16.40 Our Net Price
Round 1/8 -1322 -1323 16.40
3" long to accommodate a range of
Triangular**
Cone**
1/4 x 1/8
1/8
-1332
-1342
-1333
-1343
16.40
16.40 small files, from 5-1/2" to 7". Unique $125
* DIAMOND IS ON SIDE OF FILES set of grooves in the ball-nose end to
fit both needle and riffler files. WHILE SUPPLIES LAST.
** WHILE SUPPLIES LAST.
Diamond
Hone & Stone
Handle Part No. Our Set of 4
FEATURES: Grit Color 1-609- Net Price Set of 3 Super Fine, Fine,
• 3/4" x 2" diamond pat on Super Fine (1200) Blue -LSF $5.45 Super Fine, Fine, and Medium Grit Medium and Coarse Grit
a 6" x 3/4" plastic handle. Fine (600) Red -LF 5.45 Part No. 1-609-LPAK3 Part No. 1-609-LPAK4
• Very effective in hard to get Medium (400) Purple -LM 7.15 Our Net Price Our Net Price
places, carbide table saw Coarse (250) Black -LC 8.75
blades, router bits, deburring. Extra Coarse (150) Green -LXC 10.95 $1755 $2415
Model B10D Diamond coated B10 Part No. 1-457-008D Specially designed for brass
used to break corners Model B32 Part No. 1-457-057
Our Net Price & cast iron. Can deburr in Our Net Price
in hardened steel,
glass, plastic, etc. $964 both clockwise & counter-
clockwise directions. $158
Model B10S CobraTM Cobalt blade, Model B50 Part No. 1-457-014
1st choice for deburring Part No. 1-457-008S Carbide Tipped scriber. Our Net Price
Our Net Price Can be reground.
stainless steel and $340
other materials. $203
Model B60 H.S.S. blade can reach
Model B11 Excellent for aluminum, inside a wall up to 20mm Part No. 1-457-016
Part No. 1-457-055 Our Net Price
plastics & copper. Can Our Net Price (0.8") thick to remove
deburr a minimum hole
diameter of 2mm (0.08"). $189
internal burrs from slots
or drilled holes.
$242
Model B12 Part No. 1-457-025 Model B70* Carbide tipped deburring Part No. 1-457-018
H.S.S. similar to B10 with blade for sheet metal up to Our Net Price
a shorter nose length. Our Net Price * WHILE
3mm (0.12") thickness.
$152 SUPPLIES
LAST. Handguard 3G recommended. $473
ORIGINAL MANGO
Basic Mango Handle Part No. Our
Type 1-457- Net Price
Three different set types to choose from; Mango B -213 $7.77
Original, Cobra, and The Cobra for plastics. Mango E -214 8.19
The Original B or E Mango Set, comes with a Mango handle. Also included COBRA MANGO
are a B10, B20, B30 or E100, E200, E300 blades, depending on which set Handle Part No. Our
is ordered. Included with that set is the corresponding adapter. Type 1-457- Net Price
ORIGINAL SET E
Set E Heavy DeBurr
Handle Part No. Our
Type 1-457- Net Price
Two different set types to choose from;
The Original Set and The Cobra Sets. Mango IIE -265 $6.35
Mango II -270 11.34
Mango -204 13.60
The Original Set E comes with the choice of the Mango IIE, MANGO II Classic -060 11.66
Mango II, Mango or Classic handle. The Mango II, Mango,
& Classic handles come with the Model E blade holder and
E100, E200 & E300 blades. The Mango IIE includes COBRA SET E*
blades E100, E200 & E350, and adapter only. Handle Part No. Our
Type 1-457- Net Price
With the Cobra Set E, you receive the Model E blade MANGO II &
MANGO IIE Classic -060S $15.54
holder and 4 E100S cobalt blades. Cobalt blades provide
longer tool life, and increased resistance to wear. MANGO IIE * WHILE SUPPLIES LAST.
Set FR RatchetBurr
Handle Part No. Our
Type 1-457- Net Price
Complete with Mango
or Classic handle. Mango -206 $31.45
Model FR blade holder Classic* -082 29.45
and F20 countersink.
* WHILE SUPPLIES LAST.
Deburring Disposa-Burr
MB2000 UB1
Tools
UB2000 UB2
MB2000 FEATURES: Coated, aluminum
Fits all E type blades. handle, UB1 comes with
MB2000 Deburring Tool UB2000 Deburring Tool non-replaceable E100 UB1 DisposaBurr UB2 DisposaBurr
Comes with E100 blade.
Part No. 1-457-083 Part No. 1-457-088 blade, and UB2 comes with Part No. 1-457-009 Part No. 1-457-087
UB2000 FEATURES: non-replaceable B10 blade.
Our Net Price Our Net Price Our Net Price Our Net Price
Fits B-10 type blades. Both DisposaBurrs feature
Comes with B-10 blade. $588 $672 a convenient pocket clip. $320 $305
Scrape-Burr Cera-Burr
High quality Q100 ceramic blade affixed on
strong, lightweight handle. Excellent for
deflashing plasitcs and deburring soft metals. Part No. 1-457-125
The ideal tool to remove unwanted mold gate Our Net Price
SCRAPE-BURR 40 trim on plastic work pieces. Avoid accidents
commonly occurring with utility blades. $1229
METAL PLASTIC
FEATURES: SCRAPE-BURR 42
• New safety cap design.
• Lightweight, comfortable, easy-to-grip handle. Plum-Burr ID
• Blades permanently affixed to handle.
• Deburrs Steel, Aluminium, Copper, Brass, Pipe Cleaners
Cast Iron, Stainless Steel, and Plastics.
• The scraper features a heavy-duty triangular
blade with 3 cutting edges for high quality Perfect tool to deburr tubing on both
finishing and scraping. The 42 comes with a inner and outer edges. Excellent for
C42 blade and the 40 comes with a C40 blade. plumbers, installers and electricians.
OD
WHILE
Handguard SUPPLIES
LAST. Miniature Hooked
Stainless steel handguard to
protect your hand, especially Part No. Corner Scraper
when working with sharp
edges. Conveniently 1-457-075 Perfect for the tool and die Part No. 1-457-079
Our Net Price WHILE
slides into position and maker. Small size enables
SUPPLIES Our Net Price
locks. Highly recommended 65 you to reach the most
for Sets D, G and H. $13 inaccessible areas. LAST. $893
Model NG1003:
Model NG2002: Will do almost all of your
Will do almost all of your deburring jobs. Includes NG-1
deburring jobs. Includes NG-2 handle, S10, S20 and S35 blades.
handle, N1 and N2 blades. Model NG1005: Model NG1003 Model NG1005
Model NG2002 Model NG2004 Same as NG1003 with 2 extra
Model NG2004: Part No. 1-457-530 Part No. 1-457-534
Same as NG2002 with extra Part No. 1-457-541 Part No. 1-457-542 blades. Suitable for coarse to
extra fine deburring operations. Our Net Price Our Net Price
blades for cross holes in difficult Our Net Price Our Net Price
to reach places. Includes NG-2
$760
$1025
Includes NG-1 handle, S10, S2,
N3 and N6 blades.
$880 $1060
handle, N1, N2, N3 and N6 blades.
Model TB1000
Model LB1000
Part No. 1-457-513 Part No. 1-457-505
Our Net Price Includes UNI-handle, SN-holder, N1 & N2 blades.
Double sided blade holder to utilize both light duty "N" Our Net Price
Designed for hard to reach locations. Holds N blades.
Includes hexagonal aluminum handle and N1 blade.
$496 series and heavy duty "S" series blades. Telescopes from
$1017
3/4" to 3-1/4" with N blades, 3/4" to 2-7/8" with S blades.
Countersink RotoDrive
Reversible
Countersinks RC2000
Model NG1700
Chamfers the O.D. on bars and tubes. Very fine tool for
Quickest way to chamfer O.D. on almost all Part No. 1-457-538 deburring both back
materials. Range: 5/32" to 45/64" (4-18mm). Our Net Price side and front side
of holes.
Includes NG-1 handle and external EX2001
Rotodrive countersink. $1685 RC2200
Countersink Holder
Part No. 1-457-425
C Holder - Holds C12, C20 and C30
countersinks. M7 external thread. Our Net Price
Length: 5-5/32" (131mm). $484
Countersink Blades
C30 Part No. Our Mini Reversible Reversible Large Reversible
Blade Range 1-457- Net Price Countersink - Countersink - Countersink -
C12 3/64" to 1/2" -707 $12.30 RC1000 RC2000 RC2200
C20 3/64" to 3/4" -708 16.65 Includes steel Includes steel handle Includes aluminum
C30 3/64" to 1-1/8" -709 23.10 handle and blade. and blade. Range handle and blade.
EX2001 EX2001 5/32" to 3/4" -715 9.85 Range: 3/32" to 13/64" to 25/64" Range 25/64" to
R1 3/32" to 7/32" -719 8.20 7/32" (3-5.5mm). (5-10mm.) Uses 55/64" (10-22mm).
R2 13/64" to 25/64" -720 9.95 Uses R1 blade. R2 blade. Uses R3 blade.
R3 25/64" to 55/64" -721 9.95
RD3.2 0" to 1/8" -710 5.22 Model RC1000 Model RC2000 Model RC2200
R3 RD16.5 RD6.3 3/64" to 1/4" -711 11.90
RD8.3 3/64" to 5/16" -712 12.15 Part No. 1-457-521 Part No. 1-457-522 Part No. 1-457-523
All blades are made of RD10.4 3/64" to 3/8" -713 13.65 Our Net Price Our Net Price Our Net Price
H.S.S. Hardness 62-64Rc. RD16.5 3/64" to 5/8" -714 14.90
$1855 $1855 $2210
KBC TOOLS &
Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com MACHINERY
568 abrasives • DEBURRING TOOLS
Mini Scraper
Scraper
Internal Adjustable
Scraper Scraper
3 Pc.
4 Pc. Plastic
Plastic Rapid
Edge Burr Set
The Most Economical Set
Off Set
Model RB3000
SET INCLUDES: Model EO2100 Part No.
1 - EO handle with S150 blade for Plastic (Yellow). Part No. 1-457-524 SET INCLUDES: 1-457-560
1 - EO handle with S100 blade for Steel (Blue). 1 - RB handle with S20 blade for Brass & Cast Iron (Red). Our Net Price
1 - EO handle with S20 blade for Brass & Cast Iron (Red). Our Net Price
1 - RB handle with S100 blade for Steel & Aluminum (Blue).
1 - EO handle with S10 blade for Aluminum (Green). $9 92
1 - RB handle with S150 extra fine blade for Plastic (Yellow). $1160
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com
DEBURRING TOOLS • abrasives 569
Chamfering &
Deburring
Machine Part No.
1-548-100 SPECIFICATIONS:
Our Net Price Space Requirement ........................................... 20" x 12"
FEATURES:
• Ideal for chamfering/ $635 80 Weight ..................................................................... 67 lbs
Voltage .................................................... 1PH 110V/60Hz
deburring of small workpiece. Speed .............................................................. 3500 RPM
• Includes SPU-422 inserts Length of Guide Rails .................................................. 20"
in indexable milling cutter. Chamfering Capacity ............................................. 0 - 1/8"
• Easy set-up. Chamfering Angle .............................................. 15° - 45°
DEBURRING MACHINES
Vibratory Deburring & Working Weight Bowl Dimensions Part No. Our
Finishing Machines Model Capacity (lbs.) A B C 2-012- Net Price
150S 10 QT 32 15 6 5-3/4 -150 $730.00
200S 20 QT 35 17 7-1/4 6-1/2 -200 909.00
Model 3624
Model 3824 Model 4224 Model 4040
Top Quality AMERICAN MADE
Equipment is manufactured to perform
well for years. All cabinets are top or side
opening for easy access – even for heavy
and bulky items. Products can be used
with most blasting abrasives for cleaning,
deburring and finishing metal products,
dies and tooling.
METAL
CABINETS PLASTIC CABINET
NO DUST NO DUST COLLECTION
COLLECTION
MODEL E100:
• Light-duty glass bead
cleaning system.
• Easy to replace view
shield reduces
maintenance time & cost.
• Tapered hopper for automat-
ic recycling of abrasives.
• Heavy duty, thick wall plastic
The PK36 has a sturdy heavy duty plastic construction is
cabinet, metal angle legs assembled to designed to withstand blast
Model 4826E cabinet only, and incandescent lighting. cleaning environment.
• GLASS BEAD ONLY! Not for
MODEL PK36: use with sand or other harsh
• "Lite-duty", side door opening blast cabinet. abrasives.
Model • Side door and top opening.
3624E • Assembly of legs to cabinet only.
• Uses glass beads, sand or aluminum oxide.
Mobile Dry/Wet
Sandblaster Pressure Blasters
Cyclone pressure
FOR FINISHING ITEMS blast units are a
WHICH ARE TOO LARGE pressurized system
TO FIT IN A CABINET. of sandblasting. The
abrasive media in the
tank is pressurized,
forcing it out of the tank and into the
blasting hose. Pressure fed abrasive
blast systems are the most efficient
systems for they allow media to move
80 to 90% with the speed of air.
Model 1200
Part No. 2-011-1200 PT40:
Our Net Price • Light duty hood.
• Ceramic Nozzle.
$6700 • Air Gauge.
• Safety Relief Valve.
FEATURES: PT100 & PT250:
• Tapered abrasive hopper • Safety Goggles.
for improved flow. • Ceramic Nozzle.
• 6" wheels for excellent • Air Gauge.
maneuverability over • Safety Relief Valve.
rough terrain.
• Heavy duty trigger
operation blast gun. Model PT-40 40 lb. Unit Model PT-100 100 lb. Unit Model PT-250 250 lb. Unit
• 10' media supply hose. Part No. 2-011-PT40 Part No. 2-011-PT100 Part No. 2-011-PT250
Our Net Price Our Net Price Our Net Price
WHILE SUPPLIES LAST. $29900 $53500 $96500
SPECIFICATIONS:
Overall Dimensions ................................. 11" diameter x 25" tall
Abrasive Cap ......................... 100# - 60-100 Mesh Glass Bead SPECIFICATIONS: PT-40 PT-100 PT-250
Air Requirements ........................................ 14 CFM at 100 PSI Sand Capacity ............................. 40 lbs. ........................... 100 lbs. .................................... 250 lbs.
Shipping Weight .............................................................. 15 lbs. Nozzle Size ............................... 1/8" I.D. ............................ 1/8"I.D. ................. 1/8" I.D. or 1/2" I.D.
Hose ............................... 8 ft. of 1/2" I.D. .............. 10 ft. of 1/2"I.D. ...................... 25 ft. of 1/2" I.D.
Tank Diameter ................................... 10" .................................. 12" ........................................... 16"
OPTIONAL EQUIPMENT Height of Tank ............................. 13-1/2" .................................. 23" ........................................... 30"
Price Overall Height ............................. 25-1/4" .................................. 33" ........................................... 40"
Part No. Our Air Requirements .... 19CFM @ 80 P.S.I. ........ 19CFM @ 80 P.S.I. ........ 19CFM @ 80 P.S.I (1/8")
Description 2-011- Net Price Includes ...................................................................................................................... 73CFM @ 80 P.S.I (1/4")
Face Shield -7019 $15.95 Goggles & Shipping Weight ........................... 38 lbs. ............................. 69 lbs. ..................................... 125 lbs
24" H.D. Rubber Gloves -2023 29.00 Dust Mask
WHILE SUPPLIES LAST.
Abrasive Media
Glass Bead - Available in a wide range of sizes
this is generally the most popular blast media used.
This all purpose media is used for honing, polishing,
peening, blending, finishing and removing light burrs,
frosting glass and cleaning most light foreign matter.
ABRASIVES (50 LB. CARTONS)
Aluminum Oxide - Widely used as a cutting media.
Excellent for removing heavy foreign matter, deburring, Part No. Our
Description Grit 2-011- Net Price
etching glass and lettering stone. Extremely fast
cutting, can be reused several times. Medium Glass Bead 60-100 -5002 $40.00
Coarse Glass Bead 40-60 -5009 44.00
Garnet - Similar to Aluminum Oxide in uses. Fine Glass Bead 100-170 -5010 41.00
Very aggressive and fairly inexpensive. Extra-Fine Glass Bead 170-325 -5011 43.50
Walnut Shell - Soft aggregate is used in removal of Brown Aluminum Oxide 80 -5007 57.00
foreign matter and coatings without marking or Blasting Garnet 55 -5008X 30.00
scratching surfaces. Good for use on delicate parts. Walnut Shell 20-30 -5015W 55.00
Not very aggressive.
SydKleen™
Brush Holder
Rectangular SydKleen™
Internal Cleaning SPECIFICATIONS:
Brush Stem Dia. ... 1/8"
Holder Dia. ........... 3/8"
OAL ................... 3-3/8"
Rectangular internal cleaning brush offering most Brush Shank Dia. ............ 1/4"
effective side-action brushing. Effective for cleaning Wire Part Stem Part No. Our
odd-shaped holes, hard-to-reach interior surfaces, Dia. Size Length OAL Dia. 1-621- Net Price
cleaning and deburring threads and internal bores. 9/16"* .005 5/8" 2-1/4" 1/8" -125 $2.07 Part No.
Removes chips, scale, dirt and burrs. Surface 5/8 .005 5/8 2-1/4 1/8 -126 2.07 1-621-132
preparation tool for welding, soldering, or brazing. 3/4 .005 5/8 2-1/4 1/8 -127 2.25
7/8 .005 5/8 2-1/4 1/8 -128 2.25 Our Net Price
1 .005 5/8 2-1/4 1/8 -129 2.45
* WHILE SUPPLIES LAST.
1-1/8
1-1/4
.005
.005
5/8
5/8
2-1/4
2-1/4
1/8 -130 2.45 $620
1/8 -131 2.45
M-BRAD™
Brushes
M-BRAD abrasive filament brushes combine the flexibility of wire brushes with the cutting actions of coated abrasive cloth or other finishing products such
as greaseless compounds, set-up wheels, honing stones, files, steel wool, abrasive belts, fiber wheels, abrasive flap wheels, abrasive flap wheels and
non-woven abrasive products. M-Brad is a nylon monofilament that evenly encapsulates abrasive grit particles. Filaments flex to all angles, conforming to
the workpiece as it is conditioned. The flexibility of strands flowing over, around and into contour makes it uniquely effective. You get the exact finish you
want - from cosmetic surface preparation on wood or soft aluminum to edge-blending materials as tough as titanium. Max. RPM: up to 10,000.
CRIMPED
Made with crimped tempered wire.
Provides fast cutting action for the
removal of light encrustations of scale,
rust, paint or weld spatter.
KNOT TYPE
Knot-type construction suitable for
applications requiring medium to low flexibility
and high-impact cutting action. Heavy-duty
CRIMPED WIRE CUP WHEEL CRIMPED BEVEL WIRE WHEEL has two rows of knots.
Maximize your "Mini" - grinder with our new line of Wire Trim Part No. Our
compact brushes. Designed specifically to fit the Dia. Size Length 1-621- Net Price
majority of the mini-grinders used today, our wide line ALL HAVE 5/8"-11 3" .014" 1-3/8" -081 $17.50
and multiple arbor hole adaptation covers both light THREADED HOLE 3 .023 1-3/8 -082 15.70
and heavy-duty cleaning jobs. Carbon steel wire. 4 .014 1-1/4 -083 23.35
4 .023 1-1/4 -084 20.65
6 .023 1-3/8 -085 40.40
Wheel Wire Trim Face Part No. Our 6 .014 1-3/8 -086 32.60
Description Dia. Size Length Width 1-621- Net Price
HEAVY DUTY 5/8-11 THREADED HOLE
Knot Style Cup Wheel 2-3/4" .020" 7/8" – -115 $11.70 4 .020 1-3/8 -088 21.55
Crimped Wire Cup Wheel 3 .012 1-1/4 – -118 12.65 6 .023 1-3/8 -089 39.50
Full Cable Twist Wheel 4 .020 3/4 3/8 -116 14.40 6* .014 1-3/8 -090 60.13 ALSO AVAILABLE:
Stringer Bead Twist Wheel 4 .020 3/4 3/16 -117 11.55 STAINLESS STEEL M10 x 1.25 M10 x 1.50
Crimped Bevel Wire Wheel 4 .014 3/4 1/2 -225 10.60 M14 x 2 1/2-13 UNC
4" .020" 1-3/8" -124 23.30
Straight & Circular End Provide lighter brushing actions and superior
finish when cleaning, removing rust and paint,
Wire Brushes 1/4" SHANK smoothing, descaling, cleaning fettling from
cast seams, light deburring.
Crimped Wire
Wheel Brushes
FEATURES:
• Heavy fill density for more wire points, which
means more brushing action and longer life.
• Oil tempered, industrial quality wire.
• Wheel adapters with built-in keyways for
positive drive, eliminate slippage possibility.
• Designed for seamless gang mounting
without risk of face plate interference.
• Ring and sleeve type construction.
• Uniform wire disbursement for
optimal balance and finish.
NARROW MEDIUM WIDE
NARROW FACE
Single section brushes for light to medium duty brushing action are designed for individual use in Style A Keyed Arbor
confined areas, or in assemblies mounted on a shaft. Best suited for brushing uneven surfaces and Wheel Adapters
areas inaccessible to wider brushes. Ideal for removal of light scale, dirt, rust, corrosion, and light
burrs on non-ductile materials. FOR WHEELS WITH 1-1/4" HOLE
9" x 11"
Abrasive Part No. Our Net
Grit 1-629- Quantity Price/Pack
QUANTITY DISCOUNT
Sheets 40 -040 $30.65
Deduct 10% for 100 sheets.
50 -050 29.75
60 -060 28.00
80 -080 26.25
ALUMINUM OXIDE 100 -100 50 26.25
Heavy-Duty 120 -120 per pack 26.25
150 -150 26.25 WET OR DRY
Resin Bond 180 -180 26.25 SILICON CARBIDE FINISHING
240 -240 26.25
320 -320 26.25 Part No. Our Net
Grit 1-629F- Quantity Price/Pack
A/O sheets have a
cloth back. Wet/Dry 120 -120 $21.90
have a paper back. EMERY CLOTH SHEETS 150 -150 19.25
180 -180 15.75
Part No. Our Net 220 -220 15.75
Grit 4-901- Quantity Price/Pack 240 -240 50 15.75
280 -280 per pack 15.75
X-Coarse -036 $30.65 320 -320 15.75
Coarse -060 50 28.90 400 -400 15.75
Medium -100 per pack 26.25 500 -500 15.75
Fine -150 26.25 600 -600 15.75
Red-Back Flexible
Silicon Carbide Silicon
Waterproof Carbide
Paper Sanding
Sponges
FEATURES:
• Sharp, strong silicon Exceptional finishing in wet applications.
carbide abrasive.
Exceptional finishes
in wet applications. Part No. Our Net
Grade 1-632- Quantity Price/Pack
• Full resin bond. Longer
life in wet applications. 220 -63866 $41.20 Coarse Medium Fine
• A-weight waterproof 240 -63865 41.20 Part No.
280 -63864 41.20 Ideal for sanding Part No. Part No.
paper backing. Extremely 320 -63863 50 41.20 1-632-13711
flexible. Wet-curl resistance. sealer and wash 1-632-13710 1-632-13712
360 -63862 per pack 41.20 coats in wood, Our Net Price
Environmentally stable: 400 -63861 41.20 Our Net Price Our Net Price
and for touch-up
resists humidity-caused
curling.
500
600
-63860
-63859
41.20
41.20 or repair or primer. $134 $134 $134
EZ Touch
Contour Sponges
FEATURES:
• Thin, coated on one side with aluminum For hand sanding an Part No. Our
oxide or silcon carbide abrasive. uniform finishing of wood, metal, Grade 1-632- Net Price
Designed with superior flexibility. fiberglass, composites, plastics Medium A/O -70121 $1.55
• Can be used wet or dry; washable. and solid surfaces, and primed Fine A/O -70122 1.55
• Ideal for flat, curved, contoured stained, sealed or painted surfaces Super Fine A/O -70123 1.55
and hard-to-reach areas. Ultra Fine S/C -70124 1.55
Micro Fine S/C -70125 1.55
Aluminum Oxide
Resin Cloth Ideal for cleaning and
deburring metal surfaces.
Economy Rolls May be used dry or with oil.
FEATURES:
1" x 50 Yds. 1-1/2" x 50 Yds. 2" x 50 Yds.
• P-graded, tough and durable
brown aluminum oxide abrasives. Part No. Our Part No. Our Part No. Our
• Advanced full resin bond system Grit 1-632- Net Price 1-632- Net Price 1-632- Net Price
creates an exceptional grain 60 -10141 $27.86 -10947 $38.93 -10340 $49.54
adhesion for longer life. 80 -29328 23.54 -29339 32.91 -29350 41.82
• JCF 0852: orange J-weight back- 100 -29327 22.71 -29338 31.83 -29349 40.43
ing with increased flexibility for 120 -29326 22.71 -29337 31.83 -29348 40.43
superior conformability to complex 150 -29325 22.71 -29336 31.83 -29347 40.43
surface and better finishes. 180 -29324 22.71 -29335 31.83 -29346 40.43
• Convenient dispenser boxed; cut 240 -29322 22.71 -29333 31.83 -29344 40.43
or tear to length. 320 -29320 22.71 -29331 31.83 -29342 40.43
“Mitchell's”
Abrasive Cords TAPES CORDS
& Tapes Approx. Part No. Our Approx.
Dia. Grain
Part No.
1-607-
Our
Net Price
Dia. Grain 1-607- Net Price
3/32" 180 -56 $33.38 .093" 150 -48 $33.38
Aluminum Oxide Abrasive. Can be 3/16 150 -58 21.62 .082 120 -49 21.62
used by hand. The .093" can also 1/4 150 -59 21.12 .070 180 -50 21.12
be used with speed chucks, drills & .055 120 -51 16.04
other power tools. Finish hard-to- .055 150 -52 16.04
reach places that are inaccessible to .030 200 -54 16.10
most conventional tools. Deburr, .025 200 -54H 20.54
WHILE SUPPLIES LAST. .018 200 -55 20.54
grind & polish holes, slots, grooves, .015 200 -60 20.54
curved and carved surfaces by .012 280 -66 33.48
hand. Use on metal, plastic or wood.
Zirconia FEATURES:
• For all high performance jobs.
Abrasive • Fast & aggressive cutting action. “SATISFACTION”
Belts • Longer belt life. GUARANTEED
• Special self-sharpening abrasive grain.
• Heavy-duty stock removal.
• For stainless steel & other tough metals.
Open Coat
Sanding Belts 36 Grit 50 Grit 60 Grit
Part No. Our Part No. Our Part No. Our
Size 1-613- Net Price 1-613- Net Price 1-613- Net Price
3" x 21" -38373 $2.27 – – – –
3" x 24" -43528 2.45 – – – –
4" x 24" -35233 3.92 -43607 3.78 -26760 3.55
KK711X
Aluminum Oxide Full Resin Cloth is recommended for MADE IN GERMANY
heavy-duty grinding and deburring of all non-ferrous
metals, steel, cast iron, plastics or composites. Use for
sanding plywood, particle board, or any wood or wood ALUMINUM OXIDE
products application. HEAVY-DUTY
RESIN BOND
NOTE: A polyester backing makes it possible to use SANDING BELTS
product as waterproof in grits 24 through 80.
MODELS
NO. BCA-1 DESMOND BELTBRASIVE DRESSER BCA-1 &
For use on coated abrasives of approximately number 200 BCA-2
through 300 grain size. May be used for wet or dry applications.
MODEL BCA-4
NO. BCA-2 DESMOND BELTBRASIVE DRESSER
For use on coated abrasives of approximately number 60
through 200 grain size. May be used for wet or dry applications. Part No. Our
Model No. 1-607- Net Price BCA-4 Replacement Cutter
* WHILE Part No. 1-607-004
NO. BCA-4 DESMOND BELTBRASIVE DRESSER BCA-1* -001 $39.50
39.00 SUPPLIES Our Net Price
For use on coated abrasives number 60 grain size BCA-2 -002
LAST.
and coarser. As a rule used on dry applications. BCA-4 -003 17.30 $520
SHUR-KUT® Stik-On
Stearate Paper Discs
SHUR-KUT®
For use on "DA" dual action
sanders. They resist tearing Premium Gold
and provide aggressive cutting
and fine finishes. Recommended
Stik-On Stearate
for surface preparation on both Paper Discs
metal and wood as well as
primer sanding and feather
edging. A special treatment is
applied to this product which Heavy duty paper disc with anti-load
prevents loading and extends stearate coating that is resin bonded
the life of the abrasive. Ideal for fast cutting and long life. Designed
for hardwoods and sanding for industrial and automotive use. Ideal
operations where loading for metal, wood, paint and fiberglass.
is a problem.
Part No. Our Net Part No. Our Net Part No. Our Net Part No. Our Net
Size Grit 1-613- Price/Roll Size Grit 1-613- Price/Roll Size Grit 1-613- Price/Roll Size Grit 1-613- Price/Roll
80 -11685 $22.40 80 -11693 $31.45 80 -25078 $24.05 80 -25086 $32.25
100 -11686 22.40 100 -11694 29.95 100 -25079 22.90 100 -25087 30.70
120 -11687 21.40 120 -11695 29.95 120 -25080 22.90 120 -25088 30.70
5" 150 -11688 21.40 6" 150 -11696 29.95 5" 150 -25081 22.90 6" 150 -25089 30.70
125/roll 180 -11689 21.40 125/roll 180 -11697 29.95 100/roll 180 -25082 22.90 100/roll 180 -25090 30.70
220 -11690 21.40 220 -11698 29.95 220 -25083 21.90 220 -25091 30.70
240 -11691 21.40 240 -11699 29.95 240 -25084 21.90 240 -25092 30.70
320 -11692 21.40 320 -11700 29.95 320 -25085 21.90 320 -25093 30.70
A/O
Part No. Our Net
Quick Change Size Grit 1-631- Price/Disc
24 -592401 $.75
Laminated 36 -592402 .71
Discs 40
50
-592403
-592404
.66
.65
POWER ZIRCTM
2" 60 -592405 .62 Part No. Our Net
TYPE "R" 80 -592406 .61 Size Grit 1-631- Price/Disc
100 -592407 .60 36 -598422 $.82
120 -592408 .60 40 -598423 .75
180 -592410 .60 2" 50 -598424 .73
240 -592411 .60 60 -598425 .70
24 -592501 .95 80 -598426 .69
Lockit® features a common 36 -592502 .88 120 -598428 .68
nylon threaded male (screw 50 -592504 .82 36 -598522 .98
type) hub and mounts to 3" 60 -592505 .81 50 -598524 .92
Roloc® style holder pads 80 -592506 .79 3" 60 -598525 .89
with a half turn. 100 -592507 .77 80 -598526 .88
120 -592508 .77 120 -598528 .86
SHUR-KUT® SHUR-KUT®/
Type "S" SHUR-BRITE®
Disc Kit Type "S" Combo
Disc Kit
Each kit contains 20 of the most Each kit contains 35 of the most
popular Shur-Kut quick-change discs. popular Shur-Kut® and Shur-Brite®.
Part No. 1-613-34309
Our Net Price CONTENTS: 5 ea. quick change discs in A/O 36, 60, Part No. Our
CONTENTS: 5 - 2" discs ea. in A/O 80 and 120 grit. 5 ea. surface conditioning discs in Desc. 1-613- Net Price
36, 60, 80 and 120 grit. 1 med.
density holder with 1/4" shank.
$2100 coarse, medium and very fine. 1 med. density holder 2" Kit -28313 $33.80
with 1/4" shank. 3" Kit -28801 48.65
QUANTITY DISCOUNT
Aluminum Oxide Deduct 5% for 50 pcs.
Resin Fibre Deduct 10% for 100 pcs.
Resin Fibre
Sanding Discs Our Net Price Per Disc
24 36 50 60 80 100 120
Max. Part Grit Grit Grit Grit Grit Grit Grit
Size RPM No. 1-6302- 1-6303- 1-6304- 1-6305- 1-6306- 1-6307- 1-6308-
ALUMINUM OXIDE: 4-1/2" 13,300 -004 $.61 $.60 $.54 $.54 $.56 $.56 $.56
• A premium quality AO disc 5 12,200 -005 .74 .69 .70 .62 .63 .63 .63
designed for long life, high 7 8,600 -007 1.16 1.11 1.01 1.02 .97 .97 .97
stock removal and cool cutting 9 6,600 -009 2.24 2.08 2.02 1.94 1.86 1.86 1.86
action on metal and welds.
• Sharp, heat-treated and blue fired AO grain electrostatically
coated to a heavy duty vulcanized fibre backing with heat
resistant phelonic resins. Fast, cool cutting performance. Zirconia Resin Fibre
Our Net Price Per Disc
ZIRCONIA: 24 36 50 60 80
• High concentration of Zirconia and heat-treated Max. Part Grit Grit Grit Grit Grit
Aluminum Oxide grain provides twice the cutting action Size RPM No. 1-6302- 1-6303- 1-6304- 1-6305- 1-6306-
of premium AO discs and is extremely heat resistant. 4-1/2" 13,300 -004Z $.93 $.85 $.76 $.72 $.70
• Consistent action throughout the disc’s life. 5 12,200 -005Z 1.13 1.03 .90 .86 .81
• High performance on blending welds, stainless steel, 7 8,600 -007Z 1.58 1.47 1.36 1.30 1.24
inconel, titanium and tool steel. 7/8" Hole 9 6,600 -009Z 3.25 3.18 2.95 2.85 2.62
RUBBER PADS
Part No. Our
Size 1-602- Net Price
4-1/2" x 5/8-11 -48220 $13.35
Back-up Pads 5" x 5/8-11
7" x 5/8-11
-48221
-48222
14.75
22.45
& Accessories
POLYPROPYLENE PADS
Part No. Our
Size 1-602- Net Price
FEATURES:
• Rubber Back-up 4-1/2" -36204 $8.25
5" -36205 10.25
Pads - Use with coarse grits. 7" -36206 17.25 Adjustable
• Polypropylene Back-up Pads - Spanner Wrench
Use with medium to fine grits. 5/8" LOCKING PAD NUTS
• Spiral ribs provide contact points Part No. 1-602-48229
Flange Part No. Our
and form channels for air flow, Size Use 1-602- Net Price Our Net Price
extending disc life 30% to 50%.
• Discs are of Medium Density. 1-1/2" 4-1/2" & 5" Pads -48223 $4.35
4.35
$710
2" 7" Pads -49530
REGULAR
FEATURES:
• CGW flap discs blend and finish ULTIMATE
in one operation which replaces
the traditional two-step grinding
process of T27 wheels and sanding discs.
• Flap discs provide a more consistent finish. XL
• CGW flap discs reduce processing time which
increases productivity for lower parts finishing
costs and provides an overall cost savings.
• CGW flap discs are engineered for full use of TYPE 27/FLAT - For working on flat grinding
the coated abrasive material. Layering the surfaces. Most efficient when used between 0°-15°
abrasive cloth flaps allows the discs to wear 0°-15° angle. The best choice for smooth finish
evenly which constantly exposes new sharp grain.
TYPE 29/CONICAL - For working on
Premium Z3 - Advanced Aggressive Zirconia Abrasive contoured and edge work. Flaps are angled
• Fastest grain removal for carbon based steels and second best after at 8 degrees for greater surface contact and 15°- 25 °
Z-CGW Stainless discs on stainless steels, while offering excellent life. aggressive use. Best used at 15°-25° angle.
• Recommended for aggressive use and heavy duty applications.
• Active grinding agent provides cool cutting with light pressure. HYBRID/COMPACT - For working a rough
• Special optimized resin bond offers maximum edge work. Flaps are compressed at a 4
cutting capacity, strong edge stability and long life. degree angle for flap edge strength. Best 5°- 20°
• Premium Zirconia Alumina grain with a poly/cotton heat treated backing. The used at 5°-20° angle.
poly/cotton combination provide low stretch and strength for the high Zirconia
concentration that Z3 contains.
• XL discs have approximately 60% more material.
Premium Z-Stainless
Thickness REGULAR
• Quickest stainless steel material removal rate on the market. Plus
TYPE 27 TYPE 29
good carbon based steel material removal for versatile working.
Max Part No. Our Net Part No. Our Net
Size Grit RPM 1-595- Price/Ea. 1-595- Price/Ea. • Premium blend of Zirconia and Aluminum Oxide grains with a heat
treated polyester backing and active grinding aid. Polyester backing
40 -42103 $3.70 -42122 $3.70 is tough and has minimal stretch.
4" x 5/8" 60 15,300 -42104 3.70 -42124 3.70
80 -42105 3.70 -42125 3.70 • Additional layer containing a resing grinding aid and active grinding
36 -42301 3.70 -42321 3.70 agents lubricates the grains for break down with light pressure.
40 -42302 3.70 -42322 3.70 • Designed for heat sensitive applications and all but eliminates heat generation.
4-1/2" x 7/8" 60 13,300 -42304 3.70 -42324 3.70
80 -42305 3.70 -42325 3.70 Thickness REGULAR
120 -42306 3.70 -42326 3.70
TYPE 27 TYPE 29
36 -42311 5.10 -42331 5.95
40 13,300 -42312 5.10 -42332 5.95 Max Part No. Our Net Part No. Our Net
4-1/2" x 5/8"-11 Size Grit RPM 1-595- Price/Ea. 1-595- Price/Ea.
60 -42314 5.10 -42334 5.95
80 -42315 5.10 -42335 5.95 36 -31011 $4.50 -31051 $4.50
40 -42502 4.50 -42522 4.50 4-1/2" x 7/8" 40 -31012 4.50 -31052 4.50
60 13,300 -31014 4.50 -31054 4.50
5" x 7/8" 60 10,200 -42504 4.50 -42524 4.50
80 -42505 4.50 -42525 4.50 80 -31015 4.50 -31055 4.50
40 -42702 8.00 – – 36 -31171 5.75 -31201 5.75
7" x 7/8" 60 8,600 -42704 8.00 – – 4-1/2" x 5/8"-11 40 13,300 -31172 5.75 -31202 5.75
80 -42705 8.00 – – 60 -31174 5.75 -31204 5.75
40 -42712 9.10 – – 40 -31022 5.40 -31062 5.40
7" x 5/8"-11 60 8,600 -42714 9.10 – – 5" x 7/8" 60 10,200 -31024 5.40 -31064 5.40
80 -42715 9.10 – – 80 -31025 5.40 -31065 5.40
40 -31032 8.90 – –
Thickness XL 7" x 7/8" 60 8,600 -31034 8.90 – –
80 -31035 8.90 – –
TYPE 27 TYPE 29
Max Part No. Our Net Part No. Our Net Thickness XL
Size Grit RPM 1-595- Price/Ea. 1-595- Price/Ea.
TYPE 27 TYPE 29
40 -42342 $4.90 -42362 $4.90
60 -42344 4.90 -42364 4.90 Max Part No. Our Net Part No. Our Net
4-1/2" x 7/8" 13,300 Size Grit RPM 1-595- Price/Ea. 1-595- Price/Ea.
80 -42345 4.90 -42365 4.90
120 -42346 4.90 -42366 4.90 40 -31092 $5.70 -31132 $5.70
40 -42352 6.25 -42372 6.25 4-1/2" x 7/8" 60 13,300 -31094 5.70 -31134 5.70
60 -42354 6.25 -42374 6.25 80 -31095 5.70 -31135 5.70
4-1/2" x 5/8"-11 80 13,300 -42355 6.25 -42375 6.25 60 -31234 6.90 -31264 6.90
120 -42356 6.25 -42376 6.25 4-1/2" x 5/8"-11 80 13,300 -31235 6.90 -31265 6.90
40 -42742 10.00 – – 40 -31112 11.30 – –
7" x 7/8" 60 8,600 -42744 10.00 – – 7" x 7/8" 60 8,600 -31114 11.30 – –
80 -42745 10.00 – – 80 -31115 11.30 – –
Aluminum Oxide
• General purpose grinding and stock removal.
• Ideal for mild steels and aluminum. FEATURES:
• For aggressive grinding.
Zirconia Alumina • Must be used with
• Grinding and stock removal on back-up pads.
mild and stainless steel. TYPE 29
• Much quieter to operate
compared to grinding wheels. Silicon Carbide
• Eliminate traditional fiber disc step-over grinding.
FEATURES: For aggressive grinding of non-ferrous
• Fiberglass backed materials such as...
Type 29 adds aggression.
• Easier to control than a • Removing Epoxy, Glue or
grinding wheel, with no chatter. Urethane, Coatings, Mastiks
• Quartz / Terrazzo / Concrete
Aluminum Oxide Zirconia Alumina • Enamels / Porcelain / China clay
Part No. Our Net Part No. Our Net • Fiberglass
Size Grit 1-613- Price/Ea. 1-613- Price/Ea. • Marble
4-1/2" x 7/8" 40 -21950 $5.09 -28848 $5.23
4-1/2 x 7/8 60 -21951 5.09 -28849 5.23 Max Part No. Our Net
4-1/2 x 7/8 80 -21952 5.09 -28850 5.23 Size Grit RPM 1-595- Price/Ea.
7" x 7/8" 40 -24688 11.17* – – 16 -35842 $5.20
7 x 7/8 60 -24611 11.17* -28852 12.68* 7" x 7/8" 24 8,600 -35843 5.20
7 x 7/8 80 -24689 11.17* -28853 12.68* 36 -35844 5.20
* WHILE SUPPLIES LAST.
Prove to yourself how these fast-cutting abrasive flap wheels deliver a smooth
polish grind action on small radii, flat contoured, or intricate surfaces.
Grind-O-Flex Test Kit “CQ” contains 10 wheels, 1" to 3" Part No. 1-612-120
dia. wheels, in 1 ea. of 60, 80, and 180 grit. Our Net Price
1/4" quickchange adapter also included.
TEST KIT “CQ” Each comes with a 1/4-20 thread. $6051
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com
MOUNTED FLAP WHEELS & BORE POLISHERS • abrasives 591
SHUR-KUT®
Mini Flap
Wheels Micro-Mini
A/O "X" WT.
RESIN BOND Flap Wheel
FEATURES:
Set
• Deburring, blending parting lines, and polishing.
• For small hard to reach areas.
• For inside and outside diameters of tubes.
• Egyptian cotton enables wheel to polish in finer grits.
All mini wheels have
Part No. 1-612- 1/8" shank.
Wheel Wheel 80 120 180 240 320 Our Net
Dia. Width Grit Grit Grit Grit Grit Price/Ea. Mini Flap Wheel Kit
3/8" 3/8" -37471 -37472 -37473 -37474 -37475 $2.91 All the advantages of the
5/8 5/8 -37481 -37482 -37483 -37484 -37485 2.91 INCLUDES: larger size miniature wheels.
5/8 3/4 -37541 -37542 -37543 -37544 -37545 3.05 1-3/16" x 3/16 x 1/8" - 180 Grit, Each wheel is mounted on
3/4 3/16 -37551 -37552 -37553 -37554 -37555 3.05 3/4" x 5/8" x 1/8 - 120 Grit, a 1/8" dia. hardened steel
3/4 3/8 -37561 -37562 -37563 -37564 -37565 3.05 5/8" x 5/8" x 1/8" - 240 grit & shank. Enables super fast
3/4 1/2 -37571 -37572 -37573 -37574 -37575 3.05 120 grit, and 3/8" x 3/8" x polishing and/or light TEST KIT “MMC”
1/8" - 180 grit. deburring internal work Includes 5 Wheels,
3/4 5/8 -37581 -37582 -37583 -37584 -37585 3.05
3/4 3/4 -37591 -37592 -37593 -37594 -37595 3.09 Part No. 1-612-27276 as small as 1/2" dia. holes 3/8" to 1-3/16" diameter
1-3/16 1/8 -37491 -37492 -37493 -37494 -37495 2.91 Our Net Price or grooves. Will replace Part No. 1-612-31493
grit-impregnated rubber
1-3/16
1-3/16
3/16
3/8
-37501
-37511
-37502
-37512
-37503
-37513
-37504
-37514
-37505
-37515
2.91
3.05 $2013 points and other small
finishing tools.
Our Net Price
$26
01
SHUR-KUT®
Bore Polishers
Unmounted Flexible
Abrasive Cloth Flap Wheels
FEATURES:
• Deburring, finishing and
Hole Part No. Our Net Hole Part No. Our Net polishing of metal surfaces.
Dia. Width Size Grit 1-619- Price/Ea. Dia. Width Size Grit 1-619- Price/Ea.
• Smooth running, fast cutting.
1" 5/8" 40 -040* $7.50 1-1/2" 1" 40 -050* $19.25 • Excellent for a quick final
1 5/8 60 -041 8.05 1-1/2 1 60 -051* 19.25 finish on any metal surface.
4" 1 5/8 80 -042 8.25 6" 1-1/2 1 80 -052* 19.55 • Perfect balance produces long
1 5/8 120 -043 8.85 1-1/2 1 120 -053* 21.20 life and uniform finishes.
1 5/8 180 -044* 8.90 1-1/2 1 180 -054* 22.90 • Manufactured with heavy duty
1 1 40 -045 14.50 2 1 40 -055 23.50 "X" weight resin bond cloth.
1 1 60 -046 15.60 2 1 60 -056 23.50 • Self conforming, will retain
6" 1 1 80 -047 15.95 6" 2 1 80 -057 24.05 shape throughout its working
1 1 120 -048 16.75 2 1 120 -058 25.80 life.
1 1 180 -049 17.80 2 1 180 -059 25.80
* WHILE SUPPLIES LAST.
FEATURES:
• Deburring, blending parting lines, and polishing.
• Removes flash from automotive castings and molded rubber.
• Conforms to work piece or can be preformed before application.
• Egyptian cotton for polishing.
SHUR-KUT® Hole Part No. Our Net Hole Part No. Our Net
Dia. Width Size Grit 1-619A- Price/Ea. Dia. Width Size Grit 1-619A- Price/Ea.
Unmounted 1" 5/8" 40 -040 $9.59 1" 1" 120 -048 $18.27
6"
Flap Wheels 4" 1 5/8 120 -043 10.84 1 1 180 -049 20.29
1 5/8 180 -044 11.52 1-1/2* 1 60 -051 18.99
1-1/2* 5/8 120 -063 10.69 6 1-1/2* 1 120 -053 21.97
4
1-1/2* 5/8 180 -064 11.62 2 1 40 -055 25.71
4 2* 5/8 40 -065 14.11 2 1 60 -056 26.51
1 1 40 -045 15.71 6 2 1 80 -057 28.19
6 1 1 60 -046 15.86 2 1 120 -058 30.83
A/O "X" WT. 1 1 80 -047 16.93 2 1 180 -059 34.32
RESIN BOND
* WHILE SUPPLIES LAST.
FEATURES:
• Aggressive cutting action.
• Layers cut through, continually
SHUR-KUT® exposing fresh grain.
• 100% cotton cushions the
Cartridge Rolls cut in finer grits to polish. A/O "X" WT. RESIN BOND
Our Our
Part No. Net Price Part No. Net Price
Size Grit 1-613- Per 100 Size Grit 1-613- Per 100
40* -35040 $32.72 40* -43709 $44.65
SHUR-KUT® 60 -11904 33.20 1/2" x 2" x 1/8" 60 -16751 46.20
3/8" x 1" x 1/8" 80 -11905 33.20 80 -20099 44.65
Full Tapered 120 -11906 33.20 120 -30091 44.65
180 -11907 33.20
Rolls 40* -35540 34.82 5/8" x 1" x 3/16" 60*
120*
-22509
-44882
48.25
48.25
60 -11908 35.35 60 -38597 58.00
3/8" x 1-1/2" x 1/8" 80 -11909 35.35 5/8" x 1-1/2" x 3/16" 120 -44891 56.90
A/O "X" WT. 120 -11910 35.35
180 -11911 35.35 60 -44885 59.05
RESIN BOND 5/8" x 2" x 3/16" 80 -44886 59.05
40* -36040 35.57 120 -44887 59.05
60 -11912 36.05
PRICED PER 80 -11913 36.05 40 -44888 48.25
1/2" x 1" x 1/8" 120 -11914 36.05 60 -44889 48.25
STANDARD 3/4" x 1" x 3/16" 80 -30271 48.25
PACKAGE 240 -30126 36.00
320 -30127 36.00 120* -30273 48.25
OF 100 40 -34660 56.15
40 -30129 40.35
60 -11916 40.35 3/4" x 1-1/2" x 3/16" 60 -16993 56.15
Our tapered rolls fabricated from A/O resin bond cloth 80 -11917 40.35 80 -16652 56.30
offer the same fast cutting quality as our cartridge rolls. 1/2" x 1-1/2" x 1/8" 120 -11918 40.35 120* -16624 56.30
They are designed for use in angles and corners, and 180 -11919 40.35 40 -42591 65.55
especially useful on jobs with sharp edges, channels, 240 -16987 40.35 60 -16941 65.55
320 -16988 40.35 3/4" x 2" x 3/16" 80 -16650 66.00
fillets, and irregular or concave surfaces. A large 120 -30317 65.55
selection of grits and sizes are available.
* WHILE SUPPLIES LAST.
Roll
Mandrels
Cartridge Roll SHANK
PILOT
LENGTH
Assortment Kit 1-1/4" Dimensions
Pilot Pilot Shank Part No. Our
1/8" or 1/4" SHANK DIA. PILOT DIA.
Dia. Length Dia. 1-612- Net Price
PREMIUM A/O 1/8" 1/2" 1/8" -M1 $1.55
"X" WT. 1/8 3/4 1/8 -M2 1.55
RESIN BOND Standard shank length is 1-1/4". 1/8 1 1/8 -M3 1.55
CLOTH Extra length mandrels are 1/8 1-1/2 1/8 -M4 1.55
available in lengths up to 3/16 1/2 1/8 -M5 1.55
12" in 1/4" dia. shanks only. 3/16 3/4 1/8 -M6 1.55
Price on application. 1/8 1/2 1/4 -M7 1.55
CONTENTS: Each kit contains 1/8 3/4 1/4 -M8 1.55
120 pcs. of the most popular sizes Recommended Pilot Length 1/8 1 1/4 -M9 1.55
of straight cartridge rolls and full For Mandrels 1/8 1-1/2 1/4 -M10 1.55
tapered rolls from 1/4" to 1/2" Part No. 1-613-28802 1/8 2 1/4 -M11 1.78
For Cartridge & Taper Rolls Of:
diameter in both 1" and 1-1/2" 3/4" Length, use 1/2" Pilot 3/16 1/2 1/4 -M12 1.55
lengths. Grits are 80 and 120
Our Net Price 3/16 3/4 1/4 -M13 1.55
1" Length, use 3/4" Pilot
resin bond. Also included are 2
mandrels with 1/4" shank.
$6237 1-1/2" Length, use 1" Pilot
3/16
3/16
1
1-1/2
1/4
1/4
-M14
-M15
1.55
1.55
2" Length, use 1-1/2" Pilot 3/16 2 1/4 -M16 1.78
BriteRite®
Hand Pads
Best for hand application INDUSTRIAL COMMERCIAL
of deburring, polishing,
cleaning, finishing and
surface preparation on metal SCOURING HAND PADS
composite or plastic surfaces. Our Net Price Each
Box Case Part No.
Description Grain Color Qty. Qty. 1-631- Each Per Box Per Case
Industrial A/O Green 20 60 -827520 $1.13 $.97 $.81
Commercial* A/O Green 10 40 -827515 1.52 1.30 1.09
* WHILE SUPPLIES LAST.
GP
Good rate of cut while providing
enhanced durability when used for general
duty applications. Available in Medium,
Fine, Very Fine, and S/C Very Fine.
FEATURES:
• Designed to impart grain
finish on stainless steel.
Part No. Our
• Cleans discoloration Size Grain Grade 1-631- Net Price
from stainless steel. 6" x 9"
• Removes residue. 4" x 30' A/O Medium -830010 $76.42
HAND 6 x 30 A/O Medium -830011 110.24
• Great to reorient scratch patterns. PADS FEATURES:
• Blend tool marks. 4 x 30 A/O Fine -830015 57.09 • Best for use with vibratory orbital
6 x 30 A/O Fine -830016 82.39 and straight line sanders, to pro-
4 x 30 A/O Very Fine -830020 47.69 duce matte and satin finishes.
Our Net Price 6 x 30 A/O Very Fine -830021 68.78
Case Part No. • Rolls are also cut to size and
Description Color Qty. 1-613- Each Per Case 4 x 30 S/C Very Fine -830025 47.69 used by hand or to finish a part
Stainless Steel - S/C Black 60 -40754 $1.77 $1.51 6 x 30 S/C Very Fine -830026 68.78 turning on a lathe or spindle.
GRADE SELECTION
SHUR-BRITE® Coarse (Red)
Abrasive Wool For fast cleaning and rust removal.
Denibbing and age effecting wood.
The world’s most conformable Medium (Maroon)
and flexible abrasive material For paint surface preparation, cleaning
prior to soldering and brazing.
Fine (Gray)
FEATURES: For final finishing metals and
• For handcraft cleaning and finishing. wood polishing preparation.
• Ideal for wood, metal and other materials.
• Non-rusting, can be used wet or dry. Equiv. Finish (Approx.)
• Easy on your hands, no steel content. Coated Steel Part No. Our
• Fast abrasive cutting action. Description Color Abrasive Wool 1-613- Net Price
• Long lasting, can be re-used. Coarse Red 180-240 2-3 -39975 $13.79
• Flexible - use what you Medium Maroon 320-400 1-00 -39976 13.79
need where you need it. Fine Gray 800-1000 000-0000 -39977 13.79
• One gallon box.
SHUR-BRITE® Surface
Conditioning Belts FLEX Belts A/O
FLEX FEATURES:
Flex is a highly flexible surface • Highly flexible with outstanding edge durability.
conditioning material specially formulated • Great for mold and die work.
to ensure outstanding grain retention. • Creates linear scratch pattern on stainless for the food equipment industry.
• Removes oxidation, paint, and adhesives leaving a smear-free finish.
FEATURES: • Weld spatter and scale removal.
• Perfect for Dynafile® tools. • Blending in tool marks or removing discoloration created by heat.
• Great edge wear for demanding jobs. • Reduces surface roughness and re-orients surface scratch patterns.
• Aggressively maintains a consistent finish.
Part No.
1-613-37501
FD Quick Change Discs Our Net Price
FD or Finish Duty products enable the APPLICATIONS: $2336
operator to prepare the work piece • Deburring.
with a required surface finish. • Stock removal.
• Blending.
FEATURES: • Weld splatter
• Provides a consistent cut rate. removal.
• Maintain a repeatable measured finish. • Scale removal.
• Added flexibility. • Rust removal.
SHUR-KUT® /
Size Grit Color
Part No.
1-613-
Our Price
Per Disc
SHUR-BRITE®
1" Medium Red -35690 $.51* Combo Disc Kit
100/box Very Fine Blue -39467 .51*
Coarse Brown -10550 .56
1-1/2" Medium Red -10551 .56
100/box Each kit contains 35 of the
Very Fine Blue -10552 .56 most popular SHUR-KUT®
Coarse Brown -10553 .74 quick change discs and
2" Medium Red -10554 .71
50/box SHUR-BRITE® surface
Very Fine Blue -10555 .71 conditioning discs.
Coarse Brown -10556 1.34
3" Medium Red -10557 1.27
25/box
Very Fine Blue -10558 1.27
Coarse Brown -32120 2.00 CONTENTS: 5 ea. quick change
4" Medium Red -18354 1.92 Part No. Our
25/box discs in A/O 36, 60, 80 and 120 grit. Description 1-613- Net Price
Very Fine Blue -18353 1.92 5 ea. surface conditioning discs in
coarse, medium and very fine. 1 2" Type "R" -32056 $34.45
* WHILE SUPPLIES LAST.
med. density holder with 1/4" shank. 3" Type "R" -32057 50.10
XE Quick
Change Discs
XE or High Performance
products feature added
Ceramic grain for extended Surface
durability and aggression.
APPLICATIONS: Conditioning
FEATURES:
• Heavy deburring.
• Firm cutting action
Discs
• Highest stock removal rate. for flat surfaces.
• Firm cutting action • Laser cut edge deburring. TYPE "R"
for flat surfaces. • Heavy rust & scale removal.
• Long life. • Weld grinding & splatter removal.
Size Grade
Recommended
R.P.M.
Part No.
1-631-
Our Net
Price/Disc
A/O FE
Type "R" Quick-Change Coarse 12,000 - 20,000 -840381 $1.02 High initial and extended
Type 2" Medium 12,000 - 20,000 -840382 1.02 rate of cut. Very flexible
"R" Disc Interchangeable with 3M ROLOC® Very Fine 12,000 - 20,000 -840383 1.02
with high edge durability.
Coarse 10,000 - 18,000 -840481 1.92
Holders 3" Medium 10,000 - 18,000 -840482 1.92 Effective on both flat and
Part No. Our Very Fine 10,000 - 18,000 -840483 1.92 contoured surfaces.
Size Density 1-613- Net Price
1" MED. -11273 $4.73
1-1/2 MED. -11274 4.73
2 MED. -11275 4.73 Type Part No. Our Type "R"
3 MED. -11276 6.06 "R" Disc Size Density 1-613- Net Price Quick-Change
1/4" SHANK 4 MED. -34992 7.28 Holders 2" MED. -11275 $4.73 Interchangeable
3 MED. -11276 6.06 with 3M ROLOC®
1/4" SHANK
HS APPLICATIONS:
• Gear and thread
HS or High Strength material utilizes advanced cleaning and deburring.
resin technology in conjunction with a reinforced • Blending of light tool
SHUR-BRITE® fibrous mesh. This combination yields the marks and parting lines.
strongest, longest lasting conformable satin tool.
HS Satin • Moderate deburring.
• Edge deburring on extrusions.
Finishing FEATURES: • Finishing brass and
• The most durable product in the finishing family. steel metal stampings.
Discs • Tough fibrous mesh resists snagging and tearing. • Moderate rust and adhesive removal.
• Open construction runs cool and resists loading. • Final finishing on aerospace parts.
TYPE "R" QUICK
CHANGE
Quantity Part No. Our Price
Size Grit per Pkg. 1-613- Per Disc
A/O-Medium -38857 $1.01
Type "R" Type "R" Part No. Our 2" A/O-Fine 50 -38858 .94
Disc Quick-Change Size Density 1-613- Net Price A/O-Very Fine -38859 .94
Holders Interchangeable 2" MED. -11275 $4.73 A/O-Medium -38860 1.46
with 3M ROLOC® 3 MED. -11276 6.06 3" A/O-Fine 25 -38861 1.36
1/4" SHANK A/O-Very Fine -38862 1.36
Type Type "R" Quick-Change Interchangeable with 3M ROLOC® Part No. Our
"R" Disc Size Density 1-613- Net Price
Part No. Our TYPE "R" DISC 1-1/2" MED. -11274 $4.73
Holders Description Density 1-613- Net Price HOLDERS - 1/4" SHANK
1-1/2" holders fits 2" discs MED. -11274 $4.73 2 MED. -11275 4.73
Interchangeable
2" holder fits 3" discs MED. -11275 4.73 with 3M ROLOC® 3 MED. -11276 6.06
1/4" SHANK
SHUR-BRITE®
Stripping Discs
TYPE "R" QUICK CHANGE Type
Type "R" Quick-Change
"R" Disc
FEATURES: Interchangeable with 3M ROLOC®
• S/C X-Coarse grit. Holders
• Tough open construction will not load. Part No. Our
• Aggressive stripping and cleaning on metal surfaces. Size Density 1-613- Net Price
• Removes rust, corrosion, scale, paint, and adhesives. Part No. Our
Size 1-613- Net Price 2" MED. -11275 $4.73
• Great for weld cleaning and splatter removal.
• Removes surface coatings and surface contaminants. 2" -34364 $2.24 1/4" SHANK 3 MED. -11276 6.06
• Ideal for maintenance and machine refurbishing. 3 -34365 4.30
SHUR-BRITE®
Disc Kit
SHUR-BRITE® Contains 15 of the most TYPE "S"
Surface popular 2" Type S surface
conditioning discs.
Conditioning Part No.
1-613-34311
Discs CONTENTS: 5 ea. surface
conditioning discs in coarse, Our Net Price
medium and very fine. 1 med.
density holder with 1/4" shank. $2336
TYPE "S" QUICK
CHANGE
TYPE "S" QUICK
CHANGE
Size Density
Part No.
1-613-
Our
Net Price
Type WITH MANDREL W/O MANDREL*
"S" Disc Part No. Our Part No. Our
1" MED. -11170 $4.73 Size 1-613- Net Price 1-628- Net Price
Holders
1-1/2 MED. -11171 4.73 1"* -11170 $4.73 -310 $3.55
1-1/2 -11171 4.73 -311 3.55 * WHILE
2 MED. -11173 4.87 2 -312
1/4" SHANK -11173 4.87 3.65 SUPPLIES
1/4" SHANK 3 MED. -11176 6.06 3 -11176 6.06 -313 4.55 LAST.
SHUR-BRITE® XE
Mini Disc Wheels
BriteRite®
Buff & Blend™
Wheels
SHUR-BRITE® Shur-Brite®
Finishing Goblet Wheels
Wheel Kit WITH QUICK-CHANGE
FEATURES:
A variety of the six most popular • Specially designed for finishing round corners.
SHUR-BRITE® wheels for • Ideal for polishing stainless steel vats and tanks.
finishing, polishing, and general • Will produce a uniform and high luster finish.
cleaning applications. Wheels are
mounted on a 1/4" steel shank.
A/O Fine A/O Med.
Size Part No. Our Part No. Our
CONTENTS: Dia. x Length x Sk. 1-613- Net Price 1-613- Net Price
1 ea. Shur-Brite® mounted wheel -
2-3/8" x 1" x 1/4" SK. A/O medium 2" x 2" x 1/4" -30607 $19.20 -30608 $19.20
Part No. 3 x 2 x 1/4 -30609 21.65 -30610* 21.65
1 ea. Shur-Brite® mounted wheel - 2-3/8" x 1" x 1/4" SK. A/O fine 1-613-32061
1 ea. Shur-Brite® mounted wheel - 3" x 1" x 1/4" SK. A/O fine REFILLS
1 ea. Shur-Brite® mounted wheel - 3" x 1" x 1/4" SK. A/O medium Our Net Price 2" x 2" -30611 8.10 -30612 8.10
3" x 2" -30613 10.55 -30614* 10.55
1 ea. Duplex mounted wheel - 3" x 1" x 1/4" SK. 80 grit
1 ea. Duplex mounted wheel - 3" x 1" x 1/4" SK. 180 grit
$4635
* WHILE SUPPLIES LAST.
HIGH DENSITY
BRUSHES.
SHUR-BRITE®
Duplex Flap SHUR-BRITE®
Wheels Flap Brushes
Flexible and will conform to irregular surfaces.
A/O - ALUMINUM OXIDE Extensive applications on contour, convex,
and flat surfaces. They are excellent for fine
One to one interleaf design cushions uniform finishes on: aluminum, brass, stainless
the abrasive flaps for an extra-smooth steel, satin finishing on soft metals, removal of
operation. Produces a finer finish than fine burrs on threaded metal and applying fine
regular flap wheels. Excellent for metal finishes on aluminum extrusions.
finishing where uniform scratch patterns
or satin and decorative finishes are
required, also, for light deburring and
removal of parting lines. EXTRA-SMOOTH FINISHING. A/O Medium A/O Fine
Max. Part No. Our Part No. Our
Size RPM 1-613- Net Price 1-613- Net Price
Part No. Our Net
Size Grit 1-613- Price/Ea. 6" x 2" x 2" 3400 – – -28858 $48.09*
4" x 2" x 5/8" 80 -10423 $31.42 WHILE SUPPLIES LAST. 8" x 1" x 3" 3200 -28863 37.36 -28864 37.36
6" x 2" x 1" 180 -10431 40.71 * WHILE SUPPLIES LAST.
DEBURRING
• Medium to heavy deburring, blending and
polishing on ferrous and non-ferrous material.
BriteRite® • Starting point when the primary function is to smooth seams or welds.
Convolute
Max. Part No. Our
Wheels Size Grain Grit Density RPM 1-631- Net Price
6" x 1/2" x 1" A/O Med Med 6,000 -853042 $41.10
Constructed by wrapping 6 x 1/2 x 1 S/C Fine Med 6,000 -853053 39.75
non-woven nylon, impregnat- 6 x 1/2 x 1 S/C Fine Hard 6,000 -854053 39.75
ed throughout with abrasive
grain, around a hard core. 6x1x1 A/O Med Med 6,000 -853142 57.55
Each layer is bonded together 6x1x1 S/C Med Fine 6,000 -853152 56.30
with an adhesive to form a 6x1x1 S/C Fine Med 6,000 -853153 55.65
homogeneous wheel. Used 6x1x1 S/C Fine Hard 6,000 -854153 55.65
for deburring, cleaning, 8x1x3 A/O Med Med 4,500 -853342 71.95
blending and finishing. 8x1x3 S/C Fine Med 4,500 -853353 69.60
8x1x3 S/C Fine Hard 4,500 -854353 69.60
COMPETITIVE COMPARISON CHART
SILICONE CARBIDE (SC)
• Silicon carbide cuts faster Standard 3M Norton
BriteRite Scotch-Brite Bear-Tex METAL FINISHING WHEELS*
and leaves a finer finish. • Satin and cosmetic finishing and general purpose
Deburring Hard S/C Fine EXL Deburring 9SF Series 1000 1-9SF
• Silicon carbide is best for cleaning on ferrous and non-ferrous metals.
Metal Finishing Medium S/C Medium Multi Finishing 2SM Clean & Finish S/C Medium
finishing applications. • Intended for applying a final satin finish
to a part, and not removing material.
FOR 6" DIAMETER WHEELS • Not intended for abusive applications.
All-Metal Convolute Part No. Our
Max. Part No. Our
Wheel Bushings* Size 1-631- Net Price
Size Grain Grit Density RPM 1-631- Net Price
1" O.D. x 3/8" I.D. -850050 $2.91
1" O.D. x 5/8" I.D. -850052 2.91 8" x 1" x 3" S/C Med. Med. 2,500 -851322 $49.51
* WHILE SUPPLIES LAST.
1" O.D. x 3/4" I.D. -850053 2.91 * WHILE SUPPLIES LAST.
Mandrels
A
F
WHEEL MANDRELS
B
G
Max. Wheel Arbor Part No. Our
Image Thickness Hole Shank 1-612- Net Price C
A 1" 3/16" 1/4" -001 $7.10
1/4 1/4 -002 7.45 DISC MANDRELS
B 1/4 3/8 1/4 -003 7.75
1/4 1/4 & 3/8 -004 8.20 Arbor Part No. Our
D Image Hole OAL Shank 1-612- Net Price
C 1/2 1/4 1/4 -005 14.33
1 1/4 -006 15.46 F 1/16" 1-3/4" 1/8" -012 $4.85
5/8 1/4 -007 7.60 1/8 1-3/4 -013 4.90
D 3/4 3/8 1/4 -008 7.95 1/8 2 -014 4.90
1/2 1/2 -009 9.00 E G 1/4 2 1/4 -015 4.90
1/4 1/4 -010 7.65 1/8 3 -016 5.78
E 1/4 1/4 3 -017 5.76
1/4 3/8 -011 7.55
Rubberized Abrasive
Small Wheels
STRAIGHT EDGE WHEELS - 1/16" CENTER HOLE
Our
Net Price
Size Part No. 1-614- Per 100 COARSE
Dia Thick. Coarse Medium Fine Ex. Fine Not Asstd.
1/2" 1/16" -42C* – – – $22.09
TAPERED EDGE WHEELS - 1/16" CENTER HOLE
3/32 -53C -53M -53F* -53XF 44.48 Our
5/8 1/8 -54C -54M -54F -54XF* 53.72 Net Price
1/4 -59C* – – – 59.92 Size Part No. 1-614- Per 100
Dia Thick. Coarse Medium Fine Ex. Fine Not Asstd.
1/8 -74C* -74M -74F -74XF 56.75
7/8 3/16 -76C* -76M -76F -76XF* 79.71 3/8" 3/32" -1C* -1M -1F -1XF* $35.09
1/4 -79C* -79M* -79F* -79XF* 88.52 MEDIUM 5/8 3/32 -2C -2M -2F -2XF 40.42
3/32 -83C* -83M* -83F* -83XF* 74.03 1 1/8 -5C -5M -5F* -5XF* 70.62
1/8 -80C -80M -80F -80XF 76.82
1 3/16 -86C* -86M* -86F* -86XF* 88.52
1/4 -88C* -88M* -88F* -88XF* 100.83 * WHILE SUPPLIES LAST.
7/8"
1/8"
3/16
-74-2C
-76-2C
-74-2M
-76-2M
-74-2F
-76-2F
-74-2XF
-76-2XF
$62.38
87.07 Small Dia in inches
Shank For Hole
Part No.
1-614-
Our
Net Price
1/4
3/32
-79-2C
-83-2C
-79-2M
-83-2M
-79-2F
-83-2F
–
-83-2XF
96.91
78.27
Wheel 3/32" 1/16" -2 $3.62
-3 4.54
1
1/8
3/16
-80-2C
-86-2C
-80-2M
-86-2M
-80-2F
-86-2F
-80-2XF
-86-2XF
84.05
96.91
Mandrels 1/8
1/8
1/16
1/8 -5 5.27
1/4 -88-2C -88-2M -88-2F -88-2XF 110.48 1/4 1/8 -8* 6.05
VERY FINE
"MX" Rubberized
Abrasive Polishing Kits
FEATURES:
• MX laminated abrasives generate excellent surface finishes while
simultaneously removing substantial amounts of material quickly.
• Soft bond, general purpose, capable of blending and polishing metal
and removing small burs, fins, tooling marks on hard and soft metals.
• Non-Loading, long-lasting, polishing and cutting, soft-acting, no vibration,
aggressive, yet gentle cutting action, easily controlled, high RPM capabilities,
grinding and finishing in one step. Model 1800
Model 1600 33 Pc. Type I Wheel and
24 Pc. Mounted Wheel Kit Mounted Cone Kit
APPLICATIONS:
• Blends and polishes welded corners and seams on hard and soft metals, deburr sheared Part No. 1-614-1600 Part No. 1-614-1800
metal or cut edges, blend tool marks on molds and dies, polish radiused areas, remove Our Net Price Our Net Price
corrosion/restore to original condition. Excellent on stainless steel and titanium.
$6848 $8299
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com
RUBBERIZED POINTS, CONES & STICKS • abrasives 605
CYLINDER & BULLET SHAPES 1/16" CENTER HOLE BULLET & TAPERED SHAPES 1/8" CENTER HOLE
Rubberized Our Our
Abrasive Points Size Part No. 1-614-
Net Price
Per 100 Size Part No. 1-614-
Net Price
Per 100
Lgt. Dia. C M F XF Not Asstd. Lgt. Dia. C M F XF Not Asstd.
1/2" 1/4" -4C -4M -4F -4XF $45.04 1" 3/8" -11C -11M -11F -11XF $100.08
7/8 1/4 -6C -6M -6F -6XF 52.72 7/8 3/8 to 5/16 -12C -12M -12F -12XF* 100.08
1 9/32 -8C -8M -8F -8XF 52.72 7/8 5/8 to 1/8 -14C -14M -14F* -14XF* 112.64
5/8 3/8 -10C -10M -10F* -10XF* 55.87 7/8 1/2 -15C -15M -15F -15XF 112.64
Use only with Cratex Point Mandrels #1 & #4 Use only with Cratex Point Mandrels #6 & #9
Rubberized
Abrasive Cones
Size Part No. 1-614- Our Cone Mandrel
Lgt. Dia Coarse Medium Fine Ex. Fine Net Price
1 5/8 to 1/4 -1340C -1340M -1340F -1340XF $4.77
1-1/4 7/8 to 1/4 -1345C -1345M -1345F -1345XF* 8.51
1-1/4* 1 to 1/4 -1349C -1349M -1349F -1349XF 10.26
2 1 to 1/2 -1848C -1848M -1848F -1848XF 13.57
1 7/8 -1350C -1350M -1350F -1350XF 8.95 1/4" Shank Diameter
1-1/2 1 -1351C -1351M -1351F -1351XF* 11.41 Part No. 1-614-1341
1-1/4 7/8 -1357C -1357M -1357F -1357XF 8.95
1-3/4* 1 -1358C -1358M -1358F -1358XF 13.01 Our Net Price
1-3/4 7/8 -4707C -4707M -4707F -4707XF 13.01
$592
* WHILE SUPPLIES LAST.
Rubberized Abrasive
Blocks & Sticks
Rubberized
Abrasive Kits
CONTENTS OF KIT 777
8 Tapered Edge Wheels (No.2 5/8" dia.)
16 Straight Wheels No.74 (7/8" dia. x 1/8" thick)
8 Straight Wheels No.86 (1" dia. x 3/16" thick)
16 Cylinder Points No.6 (7/8" length x 1/4" dia.)
16 Bullet Points No.8 (1" length x 9/32" dia.) Size Part No. 1-614- Our
8 Bullet Points No.10 (5/8" length x 3/8" dia.) Lgt. Cross Sec. Coarse Medium Fine Ex. Fine Net Price
2 Wheel Mandrels No.3 (1/8" shank) SQUARE
2 Point Mandrels No.4 (1/8" shank) Part No. 1-614-777 6 1/4 x 1/4 -6202C -6202M -6202F -6202XF $5.78
Equally assorted in the four Our Net Price 6 1/2 x 1/2 -6404C -6404M -6404F -6404XF 9.95
Cratex Grit Textures C, M, F, & XF 6 3/4 x 3/4 -6606C -6606M -6606F -6606XF 17.48
$6774 6 1 x 1 -6808C -6808M
OBLONG
-6808F -6808XF* 23.68
FEATURES:
5 Pc. Mounted Stone Sets • Maximum 12,000 RPM.
• Bonded Aluminum Oxide Construction.
• Ideal for grinding, polishing, carving, cleaning, and deburring.
Silicon Carbide
Abrasive Hones
8" OAL
Flex-Hone® for Brake Cylinders, Hydraulics, Valve Guides
Bore Size 120 Grit 180 Grit 240 Grit 320 Grit FOR USE ON MANY DIFFERENT APPLICATIONS:
Model Part No Our Part No. Our Part No. Our Part No. Our
No. Inch mm 1-610FH- Net Price 1-610FH- Net Price 1-610FH- Net Price 1-610FH- Net Price • Hydraulics • Brake & pneumatic cylinders
BC 5mm .197" 5mm -001 $15.72 -030 $15.72 -059 $16.67 -088 $23.58 • Valve bodies and guides • Small engines
BC 5.5mm .217" 5.5mm -002 15.97 -031 15.97 -060 16.94 -089 23.97 • Lifter bores • Tubing
BC 6.4mm .250" 6.4mm -003 10.53 -032 10.53 -061 11.15 -090 15.81
BC 7mm .276" 7mm -004 10.56 -033 10.65 -062 11.25 -091 15.91 Flex-Hone®
BC 8mm .315" 8mm -005 11.14 -034 11.14 -063 11.82 -092 16.69 For Rotors
BC 9mm .354" 9mm -006 11.60 -035 11.60 -064 12.30 -093 17.40
BC 9.5mm .375" 9.5mm -007 11.72 -036 11.72 -065 12.43 -094 17.58
BC 10mm .394" 10mm -008 11.85 -037 11.85 -066 12.54 -095 17.76 Utilizes the patented
BC 11mm .433" 11mm -009 12.10 -038 12.10 -067 12.83 -096 18.13 Flex-hone® technology
BC 12mm .472" 12mm -010 12.36 -039 12.36 -068 13.11 -097 18.53 to produce the ideal
BC 1/2" 1/2" 12.7mm -011 12.60 -040 12.60 -069 13.33 -098 18.86 surface finish on
BC 14mm .552 14mm -012 12.65 -041 12.65 -070 13.41 -099 18.98 disc brake rotors
BC 5/8" 5/8" 16mm -013 13.37 -042 13.37 -071 14.17 -100 20.05 and flywheels.
BC 18mm .709" 18mm -014 13.73 -043 13.73 -072 14.54 -101 20.58
BC 3/4" 3/4" 19mm -015 14.08 -044 14.08 -073 14.90 -102 21.11
BC 20mm .787" 20mm -016 14.15 -045 14.15 -074 14.99 -103 21.22 FEATURES:
BC 7/8" 7/8" 22mm -017 14.23 -046 14.23 -075 15.08 -104 21.33 • Lowers harmonic vibrations
BC 1" 1" 25.4mm -018 15.18 -047 15.18 -076 16.10 -105 22.75 caused by rough turned finishes.
BC 1-1/8" 1-1/8" 29mm -019 15.96 -048 15.96 -077 16.92 -106 23.97 • Produces a non-directional pattern
BC 1-1/4" 1-1/4" 31.8mm -020 17.22 -049 17.22 -078 18.24 -107 25.86 • More rotors per hone; lasts much longer than abrasive pads
BC 1-3/8" 1-3/8" 35mm -021 17.67 -050 17.67 -079 18.76 -108 26.56 • Ideal for new or re-turned rotors or flywheels. Removes
BC 1-1/2" 1-1/2" 38mm -022 18.99 -051 18.99 -080 20.10 -109 28.44 the cut, torn, and folded metal fragments from the surface.
BC 1-5/8" 1-5/8" 41mm -023 19.00 -052 19.00 -081 20.11 -110 28.50
BC 1-3/4" 1-3/4" 45mm -024 19.83 -053 19.83 -082 21.03 -111 29.77
BC 2" 2" 51mm -025 20.56 -054 20.56 -083 21.81 -112 30.88 Part No. Our
BC 2-1/4" 2-1/4" 57mm -026 22.28 -055 20.28 -084 23.61 -113 33.41 Model No. Grit 1-610FH- Net Price
BC 2-1/2" 2-1/2" 64mm -027 24.00 -056 24.00 -085 25.43 -114 35.98 RMFH60Z25 Coarse -193 $38.55
BC 2-3/4" 2-3/4" 70mm -028 26.50 -057 26.50 -086 28.07 -115 39.74 RMFH120Z25 Medium -194 38.55
BC 3" 3" 76mm -029 30.73 -058 30.73 -087 32.61 -116 46.13 RMFH240Z25 Fine -195 38.55
Hole Brush Brush Overall Stem Part No. Our Hole Brush Brush Overall Stem Part No. Our
Model No. Dia. Dia. Length Length Dia. 1-610FH- Net Price Model No. Dia. Dia. Length Length Dia. 1-610FH- Net Price
81-AD .032 0.032" 0.035" 5/8" 3" 0.016" -300 $6.06 81-AD .142 0.142" 0.156" 1" 3" 0.055" -313 $5.60
81-AD 1mm 0.039 0.043 5/8 3 0.016 -301 6.11 81-AD .156 0.156 0.172 1 3 0.072 -314 5.73
81-AD .047 0.047 0.052 3/4 3 0.026 -302 6.22 81-AD 4mm 0.157 0.173 1 3 0.055 -315 5.73
81-AD .054 0.054 0.059 3/4 3 0.026 -303 6.27 81-AD .172 0.172 0.189 1 3 0.072 -316 7.10
81-AD 1.5mm 0.059 0.065 5/8 3 0.026 -304 6.24 81-AD 4.5mm 0.177 0.195 1 3 0.072 -317 7.24
81-AD .063 0.063 0.069 3/4 3 0.026 -305 5.30 81-AD .189 0.189 0.208 1 3 0.072 -318 7.41
81-AD 2mm 0.079 0.087 3/4 3 0.034 -306 4.80 81-AD 5mm 0.197 0.217 1 3 0.072 -319 7.54
81-AD .094 0.094 0.103 3/4 3 0.043 -307 5.00 81-AD 5.5mm 0.217 0.238 1 3 0.110 -320 7.95
81-AD 2.5mm 0.098 0.108 3/4 3 0.043 -308 5.02 81-AD 7/32 0.219 0.241 1-1/2 3 0.072 -321 9.72
81-AD .109 0.109 0.120 3/4 3 0.055 -309 5.15 81-AD 6mm 0.236 0.260 1 3 0.0110 -322 8.45
81-AD 3mm 0.118 0.130 1 3 0.055 -310 5.02 81-AD 1/4 0.250 0.275 1-1/2 3 0.0110 -323 10.51
81-AD .125 0.125 0.138 1 3 0.055 -311 5.07 81-AD 6.5mm 0.256 0.281 1 3 0.0110 -324 8.73
81-AD 3.5mm 0.138 0.152 1 3 0.055 -312 5.46
BOTTOM END MINIATURE DIAMOND DEBURRING BRUSHES ALSO AVAILABLE – PLEASE INQUIRE.
1 lb. Can
Part No. Our
GRADE & GRIT SELECTOR GUIDE
Grade Grit 1-442- Net Price Grade Grit Use
®
Clover 6A 1000 -516 $36.00 6A
5A
1000
800
EXTREMELY FINE
Polishing, High Precision Lapping
5A 800 -517 36.00
Silicon Carbide 4A 600 -518 36.00 4A
3A
600
500 VERY FINE
3A 500 -519 22.75 For Fine Polishing & Lapping
Grease Mix 2A 400 -520 22.75 2A
1A
400
320 FINE for Finishing, Valve
1A 320 -521 22.75 A 280 Lapping, Bearings, Dies & Gauges
A 280 -522 21.65 B 240 MEDIUM FINE
B 240 -523 21.65 C 220 For Cylinder Lapping
Allows final finishing of metal surfaces C 220 -524 21.65 D 180 MEDIUM General Purpose for
not practical with mechanical methods D 180 -525 21.65 NC 150 Controlled Metal Removal
alone. Produces an ultra-flat surface, NC 150 -526 21.65 E 120 COARSE
E 120 -527 21.65 F 100 For the Initial "Cut"
creating perfectly-mated parts for G 80
running-in gears and finishing F 100 -528 21.65 Fast Removal of Metal
G 80 -529 21.65 50 VERY COARSE
industrial valves. J 50 -530 21.65 J For Fastest Metal Removal
Set of 3
Super Fine, Fine,
Cryston Hand Lappers
and Medium Grit
Part No. 1-609-LPAK3
FEATURES: Our Net Price
• 3/4" x 2" diamond pat on a 6" x 3/4" plastic handle.
• Very effective in hard to get places, carbide table $1755
saw blades, router bits, deburring.
Set of 4 Used to hone cutting
Handle Part No. Our Super Fine, Fine,
Grit Color 1-609- Net Price edges on all types of
Medium and Coarse Grit metals, including 3 PIECE SET ULTRA FINE GRAIN
Super Fine (1200) Blue -LSF $5.45 Part No. 1-609-LPAK4 Tungsten Carbide. 250, 320, 400 Grit 600 Grit
Fine (600) Red -LF 5.45 (Note: lappers should Part No. 1-578-010 Part No. 1-578-012
Medium (400) Purple -LM 7.15 Our Net Price
be used with oil). 5-1/2" Our Net Price Our Net Price
Coarse (250) Black -LC 8.75 $2415 long, cutting dimensions:
Extra Coarse (150) Green -LXC 10.95 1-9/16"x 1/2"x 3/16". $4485 $2065
Combination
Sharpening
Stones
Bench
Stones
FEATURES:
• Fast cutting for general
sharpening of cutting tools. Silicon Carbide Aluminum Oxide
• Preferred where speed is Part No. 1-909-065 Part No. 1-909-070
more important than Our Net Price Our Net Price
fineness of cutting edge.
• 5-7/8" x 2" x 1". $565 $565 Applications include CRYSTALON (Silicon Carbide): Premium silcon
restoring the cutting carbide abrasive. Fast cutting stone; ideal for gen-
edge on straight-edged eral sharpening of cutting tools. Fast stock removal
tools such as chisels, for quick edge sharpening with minimal loading.
plane blades, wood lathe
cutters, craw knives,
spoke shaves, knives, INDIA (Aluminum Oxide): Smooth cutting aluminum
and precision tools and oxide abrasive, our patent for a fine finish. Long last-
ing cutting edge. Ideal for clean deburring, generat-
Double Sided delicate instruments.
ing keen edges and quality finishes.
Diamond Stones SINGLE GRIT
CRYSTALON INDIA
FEATURES: Part No. Our Part No. Our
• 2" x 6" double sided, each side has a different grit. Size Grit 1-632- Net Price 1-632- Net Price
• A quick, easier way to sharpen both cutlery and tools. 4" x 1" x 1/4" Fine -85460 $10.00 -85570 $9.10
• Tougher, longer lasting, heat treated diamond sharpening. 4 x 1 x 1/4 Medium -85465 10.00 -85575 9.10
• Unique bonding of diamond surface to the substrate. 4 x 1 x 1/2 Fine -85475 13.90 -85585 12.67
4 x 1 x 1/2 Medium -85480 13.90 -85590 12.67
Part No. Our 6x2x1 Fine – – -85610 28.71
Grit 1-609- Net Price 6x2x1 Medium – – -85615 28.71
Fine (600) & Medium (400) -DD6FM $54.95
Fine (600) & Coarse (250) -DD6FC 54.95 COMBINATION GRIT
Medium (400) & Coarse (250) -DD6MC 54.95 CRYSTALON INDIA
Part No. Our Part No. Our
Size Grit 1-632- Net Price 1-632- Net Price
FEATURES:
• Sharpens quickly.
• Use on hard material, stays flat.
• Convenient credit card size, 2" x 3-1/4".
Flat Machine
Diamond Knife Stone
Stones 2" x 6" diamond stone
on a walnut pedestal.
Crystolon (silicon carbide) Machine
Knife Stones offer both coarse and fine
Part No. Our
sides for sharpening and honing paper 4" Dia. x 1-1/2" Thick
Diamond Stones are perfect for hunting, Grit 1-609- Net Price
and fishing knives, woodworking tools, and cloth-cutting knives and planer Part No. 1-632-87570
exacto blades, axes and industrial use. Fine (600) -62F $30.25 knives on the machine. The groove Our Net Price
No oil or water is necessary, the surface Medium (270) -62M 36.85 around the middle of the stone protects
will remain true and flat. Coarse (180) -62C 42.85 fingers and provides a secure hold. $4626
CONTENTS:
1 - 18 oz. tube Tripoli Buffing Compound - Cut/Color Grade
1 - 18 oz. tube Aluminum Buffing Compound - Cut/Color Grade
1 - 20 oz. tube Steel Buffing Compound - Cut/Color Grade
Micro Finishing 1 - 20 oz. tube Sisal/Cloth Buffing Compound - Cutting Grade
1 - 20 oz. tube Plastic Buffing Compound - Coloring Grade
Wheel & 1 - 20 oz. tube Marine Blue Rouge - High-Luster Coloring Grade
Compound Kit This 6 bar kit allows you to have a variety of 6 Bar Kit
CONTENTS: Part No. compounds handy to test on metals and plastics Part No.
1 - 8" x 1" Face, Sisal/Cloth Wheel 1-442-515555 making it easy to select the ideal product for a 1-442-515110
1 - 8" x 1" Face, Cotton Buff Wheel Our Net Price particular use. Each compound is individually Our Net Price
1 - Cut Down Grade Compound labeled with the product number, description
1 - High Shine Rouge Compound $5545 and recommended use. Shipping weight 11 lbs. $3370
KBC TOOLS &
MACHINERY Phone: 1-800-521-1740 Fax: 1-800-322-4292 www. KBCTools.com