You are on page 1of 6

ITER-INDIA

(Institute for Plasma Research)


Plot No. A/29, GIDC Electronics Estate, Sector-25, Gandhinagar-382025, Gujarat (India)

Advt. No.: ITER-India - 02/2010


ITER (ITER, http://www.iter.org) is a Multi-Billion Euro International Scientific project in which India, as
one of the seven members, makes 9% contribution towards equipment. (This will be supplied ‘in-kind’,
i.e., by building the systems/components in India and sending them to the construction site at
Cadarache in France). The activities in India are coordinated by the Domestic Agency called ITER-India
(http://www.iter-india.org). To help it in carrying out its responsibilities for the ITER Project, ITER-India
wishes to appoint Engineers in the following areas/disciplines. The appointments will be in Pay Band 3
( Rs. 15600-39100) with total emoluments not less than Rs. 48675/-
Post Description Minimum Qualification Experience*** Job description
Code of Post (See Note Below)
09 RF/MW Master’s Degree in a Design & implementation Design & analysis of
Engineer-SD field involving of low/high power high power
RF/Microwave RF/Microwave systems, (kW/MW) RF
Engg/Microwave assembly, integration & systems in MHz freq.
Electronics/ Microwave testing of different range, simulation
and Communication RF/Microwave systems & studies & mock-up
with 2 years of working cross integration between for the amplifier
experience disciplines of related cavities, QA,
Engineering fields Tendering,
Execution, passive &
active testing,
assembly, integration
and commissioning
of high power RF
systems.

10 Electrical Master’s Degree Design and implementation Development,


Engineer-SD (ME/M.Tech) in of Low & /High voltage integration, testing &
Electrical Engineering electrical systems , Testing commissioning of
with 2 years of working of various electrical systemsvarious electrical
experience OR and cross systems like LT
integration
BE/B.Tech. Degree in between disciplines of distribution system,
Electrical Engineering. related Engineering field RF generator system,
and 4 years of working low and high voltage
experience power supply
systems and various
high voltage devices
11 Mechanical A Master’s degree (ie Heavy engineering practices To plan and execute
& Engineer-SD ME/M.Tech) in fabrication industry, out of the fabrication,
12 Mechanical Engineering which at least 2 years must delivery and
with 2 years of working be in Pressure or Vacuum assembly of
experience OR Vessel fabrication. Working components related
BE/B.Tech degree in knowledge of NDT, to the Cryostat
Mechanical Engineering Welding and machining system.
with 4 years of working processes. Knowledge of
experience. ASME codes for Materials,
Manufacturing and
Inspection of Pressure
Vessels and various high
voltage devices.
13 Mechanical A Master’s degree (ie Handling QA issues in Work on
Engineer-SD ME/M.Tech) in reputed organisations, developing QA
Mechanical Engineering Should be knowledgeable in plans, their
with 2 years of working Codes and Standards implementation and
experience OR participate in QA
BE/B.Tech degree in tests . Generate QA
Mechanical Engineering related documents
with 4 years of working
experience.

14 Mechanical A Master’s degree (ie Manufacturing design. Work on design,


Engineer-SD ME/M.Tech) in Knowledge of integration and
Mechanical Engineering manufacturing process fabrication, prepare
with 2 years of working qualification technical
experience OR Familiarity with codes and procurement
BE/B.Tech degree in standards applicable to documents
Mechanical Engineering design Liaise with
with 4 years of working engineering services
experience. on design and
industry on
manufacturing
Generate acceptance
test requirements and
liaise with QA
engineer for
implementation

15 Mechanical A Master’s degree (i.e Remote Handling (RH) in Work with a lead
Engineer-SD ME/M.Tech) in automation systems. engineer for RH
Mechanical Engineering Familiarity with vacuum integration and
with 2 years of working engineering is desirable. development of
experience OR special movement
BE/B.Tech degree in systems. Follow – up
Mechanical Engineering with Industry for
with 4 years of working implementation
experience.
16 Mechanical A Master’s degree (ie Design of handling Work on
Engineer-SD ME/M.Tech) in equipments. Knowledge of Mechanical
Mechanical Engineering CATIA essential. engineering design
with 2 years of working of vessels,
experience OR components,
BE/B.Tech degree in structures and
Mechanical Engineering alignment issues of a
with 4 years of working test facility for
experience. Neutral Beam.
Work out assembly
& alignment plan;
design and procure
handling tools;
oversee services
integration for the
facility.

17 Mechanical A Master’s degree (ie Heavy Engineering related Preparing NDT


Engineer-SD ME/M.Tech) in industries. procedures, Carrying
Mechanical/Production Desirable: ASNT/ISNT out NDT inspections
Engineering with 2 years Level III in any of the NDT
and preparation of
of working experience Techniques (RT- reports,
OR BE/B.Tech degree in Radiography ,UT- Implementation of
Mechanical/Production Ultrasonic, MPT- Magnetic codes & standards
Engineering with 4 years particle testing, PT- and procedures,
of working experience. Penetrant testing). Developing new
practices to support
the NDT activities.
18 Mechanical A Master’s degree (ie Experience of Welding in Preparation of the
Engineer-SD ME/M.Tech) in Heavy Fabrication Welding Procedures
Mechanical/ Welding industries. Knowledge of as per the Design
Engineering and 2 years Material Science, NDT, codes, Implementing
of working experience Heat Treatment; Knowledge the Inspection
OR a BE/B.Tech. in of Statutory Regulations methodology,
Mechanical/Production and International Quality Selection and the
Engineering with 4 years Codes (ASME, ASTM, Approval of the
of working experience ANSI, BS, EN CODES) Welding Quality
Desirable : AWS / CSWIP Control Plan,
3.2 certification Preparing Welding
Performance
Qualification (WPQ)
&
Reviewing Procedure
Qualification Record
(PQR)

The applicants should get the full details of the posts from our website-(http://www.iter-india.org)
before filling out the application form which is also to be downloaded from the website.

N.B.

Experience means experience in a relevant field after qualifying degree (other than teaching experience).
Merely satisfying the minimum requirement does not ensure that an applicant would be eligible for the
next stage of the selection procedure or an interview.

For Engineer at SD level, candidates with BE/B.Tech. Degree with 4 years of work experience and
candidates with ME/M.Tech. Degree with 2 years of work experience may apply.

Applicants with more than 8 years of relevant experience after BE/B.Tech or 6 years of relevant
experience after ME/M.Tech Degree may be considered at higher level.

For post code 09 only candidates with a Master’s Degree in the specialization mentioned are eligible.
Note:

(1) Age Criteria: For all the above post maximum age limit is 35 years. (Age as on the last date for
receipt of applications).

(2) Total emoluments shall consist of Basic Pay (Band Pay +Grade Pay), Dearness Allowance, House
Rent Allowances, etc., as per applicable Govt.rates.

(3) Medical, Transport and subsidized canteen facilities are available.

(4) Short listed candidates will be called for a personal interview at Gandhinagar. To and Fro Train
(by 2 tier AC Or Bus fare by direct and shortest route will be reimbursed to out-station
candidates for interview on production of tickets or proofs of journey such as Railway/Bus
tickets or ticket number.)

(5) Persons desirous of applying for these posts should send their applications ONLY in the
prescribed Application Forms which are to be downloaded from our website given below.,

(6) Attested copies for Proof of qualification, experience etc. should be attached along with the
application form. A recent photo should pasted on the application form.

(7) Candidates should attach a note (on a separate sheet, minimum one page & maximum 2
pages) giving details of significant experience and responsibilities handled in recent years (see
item 14 in Application Form).

(8) Please note that candidates employed in Govt./Quasi Govt./Public Sector Undertakings should
forward their applications through proper channel or bring an NOC if called for interview. The
NOC requirement shall be strictly adhered to.

(9) If a candidate intends to apply for more than one post, separate applications (with enclosures)
for each post should be sent (see item 2 in Application Form).

(10) Completed Applications with the required details and attested copies of certificates should be
sent to

The Project Director ITER-India, Institute for Plasma Research, Plot No. A-29, GIDC Electronic
Estate, Sector-25, Gandhinagar-382025 Gujarat so as to reach by 3 December 2010 duly super
scribing the advertisement and post nos. on the cover .

(11) Canvassing/interim enquiries etc. in any form will not be entertained


Affix your
ITER-INDIA recent
INSTITUTE FOR PLASMA RESEARCH passport size
colour
Plot No. A/29, GIDC Electronics Estate, Sector-25, photograph
Gandhinagar-382 025, Gujarat (INDIA)
here
Phone: 079-23269500/23269589/90 Fax : 079-23269501/9591

APPLICATION FORM
1. Advt. No. & Sl. No.:
2. 2a) Post Applied for :
2b) I am also applying for (Write appropriate Sr. No. of post)
another post *
3. Name : First/Given name :
(in capital letters)
Family name/Surname:
4. Father’s/Husband’s Name:
5. Date of Birth (DD/MM/YYYY) : 6. Category :(Attach attested copy of proof except for General)
General SC ST OBC PH Ex-S
7. Nationality :
8. Permanent Address :

9. Address for Correspondence :

10. Nearest Railway Station :


11. Phone No.: Mobile No. :
Email ID :
12. References: (Names, addresses and 1)
contact numbers of two senior
responsible persons, who are familiar
with your professional work, whom
we can contact)
2)
13. Educational & Professional Qualifications (SSC onwards)
Level Exam Passed Board / Year of Class / Main Subjects
University Passing Percentage of
Marks
Class X

Class XII

Pre-
graduation
Dipl.
Graduation
(Bachelors
degree)
PG Diploma

Post
Graduation
(Masters
degree)
Any other

14. Experience (start with present position and proceed backwards)


Name of the Post held Period Total Monthly Nature of work in brief
Employer with period Salary (Give details in separate
Address From To (years & sheet**)
Months)
1)

2)

3)

4)

I affirm that the information given in this application is true and correct. I also fully understand that if at any
stage it is discovered that an attempt has been made by me to willfully conceal or misrepresent the facts, my
candidature may be summarily rejected or my employment terminated.
Date: Signature of the Candidate
Place:

* Mandatory: If applying for more than one post, please use separate application forms.
** Mandatory: On a separate sheet describe in your own words, details of your experience and
responsibilities in recent years.

You might also like