Professional Documents
Culture Documents
S P E C I F I C AT I O N S H E E T
Series 860
Capacity
kPa 172 138 103 69 34 psi 25 20 15 10 5
12
Pressure Temperature
Max. Working Pressure: 175psi (12.1 bar) Hydrostatic Test Press: 350psi (24.1 bar) Temperature Range: 32F to 140F (0C to 60C)
Head Loss
" (15mm)
Materials
Head Loss
0 0
3 11
6 22
34
9 34
12 45
15 57
18 gpm 68 lpm
Models
Wye - Strainer
psi 25 20 15 10 5 0 0 psi 25 20 15 10 5 0 0
" (20mm)
5 19
10 38
15 57
20 76
25 95
Approvals Standards
Head Loss
ANSI/AWWA Conformance (C511) Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California.
1" (25mm)
10 38
20 76
30 114
40 151
50 190
1013
B64.4
Head Loss
Typical Installation
Series 860 12" - 2" (15 - 50mm) Outdoor Installation
12" (300mm) Minimum Clearance to Fixed Structure
psi 25 20 15 10 5
114" (32mm)
0 0
20 76
40 151
60 227
80 304
100 379
psi 25 20 15 10 5
112" (40mm)
Head Loss
0 0
20 76
40 151
60 227
80 304
100 379
Flow
Head Loss
6" Min. (150mm) IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
psi 25 20 15 10 5
2" (50mm)
0 0
30 114
60 227
90 342
120 454
150 570
FEBCO product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact FEBCO. FEBCO reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on FEBCO products previously or subsequently sold.
Check Assembly
Note: The gap drain is not designed to catch the maximum discharge possible from the relief valve. The installation of FEBCO air gap with the drain line terminating above a floor drain will handle any normal discharge or nuisance spitting through the relief valve. However, floor drain size may need to be designed to prevent water damage caused by a catastrophic failure condition. Do not reduce the size of the drain line from the air gap fitting.
Dimensions Weights
Size: 12" - 2" (15 - 50mm)
SIZE (DN)
A in. mm in. mm in. B mm in.
DIMENSIONS
C mm in. D mm in. E mm
WEIGHT
lbs. kgs.
34 1 114 112 2
12
15 20 25 32 40 50
38 38 48 76 76 89
38 38 41 64 64 64
89 5.6 2.5 89 5.8 2.6 92 9.2 4.2 143 20.2 9.2 143 20.6 9.4 143 24.8 11.3
Note: Dimensions are nominal. Allowances must be made for normal manufacturing tolerances.
USA: 4381 N. Brawley Ste. 102 Fresno, CA 93722 Tel. (559) 441-5300 Fax: (559) 441-5301 www.FEBCOonline.com Canada: 5435 North Service Rd. Burlington, ONT. L7L 5H7 Tel. (905) 332-4090 Fax: (905) 332-7068 www.FEBCOonline.ca
ES-F-860S 0814
2009 FEBCO