Professional Documents
Culture Documents
VOLUME – III
2 PLUMBING WORKS
2.1 As per DSR 2014 2178735.75
2.2 Non DSR Items 5489758.00
4 ELECTRICAL WORKS
4.1 As per DSR 2014 2761647.00
4.2 Non DSR Items 15808820.00
5 EOT CRANES
5.1 As per DSR 2014 0.00
5.2 Non DSR Items 22549281.00
Total 405533289.74
Rupees…………………………………….................................................
in Words
SEAL & SIGNATURE OF BIDDER
INTERMODAL TERMINAL AT VARANASI (U.P.)
8 TOTAL FOR SUBHEAD - WOOD WORK AND PVC WORK 449922.35 0.00
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
CIVIL WORK
CARRIAGE OF MATERIALS
carriage of materials by mechanical transport including loading,
1 1.1
unloading and stacking.
1.1.2 Earth upto 2km cum 5808.00 113.29 657,988.32 -
EARTH WORK
Earth work in surface excavation not exceeding 30 cm in depth but
exceeding 1.5 m in width as well as 10 sum on plan including
2 2.1
disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed
soil to be levelled and neatly dressed
2.1.1 All kinds of soil 100sqm 6844.00 5,044.15 345,221.63 -
3 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
9 2.26 Extra for every additional lift of 1.5 m or part thereof in.
2.26.1 All kinds of soil. cum 10728.00 46.25 496,170.00 -
Supplying and filling in plinth with Local sand under floors, including
10 2.27 watering, ramming, consolidating and dressing complete.
cum 152.00 910.25 138,358.00 -
4 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Diluting and injecting chemical emulsion for pre constructional anti-
termite treatment and creating a continous chemical barrier under all
round the column pits, wall trenches, basement excavation, top
surface plinth filling, junction of wall and floor, along the external
perimeter of the building, expansion joints over the top surface of
consolidated earth on which apron is to be laid, sorrounding of pipes
12 NSI - 1
and conduits etc. complete as per specifications.( plinth are of the
building at ground floor only shall be measured in sqm for payment )
With chloropyriphos emulsifiable concentrates of 20 % with 1 %
concentration, at the rate of 7.5 litre per sqm for vertical surface and
5 litres per sqm of horizontal surface.
Sqm 1584.14 - 172.00 272,471.22
5 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
a Add 12.5% for every additional meter depth of sinking over the rate
metre
of sinking for the previous meter 3.66 17,679.65 64,707.53
b Add 20% of cost for Kentledge including supports, loading
metre
arrangement, and Labour etc 3.66 21,215.58 77,649.04
15 NSI-3 Sinking of 9 m external diameter well ( other than pneumatic method
of sinking ) through all types of strata namely sandy soil, clayey soil
and rock as shown against each case,complete as per drawing and
technical specifications. Depth of sinking is reckoned from bed level.
A Sandy soil
(i) Depth below bed level upto 3.0 M metre 9.00 10,344.00 93,096.00
(ii) Beyond 3m upto 10m depth metre 18.00 13,889.00 250,002.00
(iii) Beyond 10m upto 20m
a Add 5% for every additional meter depth of sinking over the rate of
metre
sinking for the previous meter 30.00 14,583.45 437,503.50
(iv) Beyond 20m upto 30 m
a Add 7.5% for every additional meter depth of sinking over the rate
metre
of sinking for the previous meter 30.00 15,677.21 470,316.26
b Add 20% of cost for Kentledge including supports, loading
metre
arrangement and Labour . 30.00 18,812.65 564,379.52
(v) Beyond 30m upto 40 m
a Add 10% for every additional meter depth of sinking over the rate
metre
of sinking for the previous meter 30.00 17,244.93 517,347.89
b Add 20% of cost for Kentledge including supports, loading
metre
arrangement, and Labour 30.00 20,693.92 620,817.47
(v) Beyond 40m upto 50 m
a Add 12.5% for every additional meter depth of sinking over the rate
metre
of sinking for the previous meter 12.00 19,400.55 232,806.55
b Add 20% of cost for Kentledge including supports, loading
metre
arrangement, and Labour etc 12.00 23,280.65 279,367.86
CONCRETE WORK
6 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and laying in position cement concrete of specified grade
17 4.1 excluding the cost of centring and shuttering - All work upto plinth
level :
4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
cum
nominal size) 44.00 5,466.30 240,517.20
1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm
4.1.8 nominal size). cum 280.00 4,301.15 1,204,322.00 -
Providing and fixing upto floor five level precast cement concrete
string or lacing courses, copings, bed plates, anchor blocks, plain
window sills, shelves, louvers, steps, stair cases, etc. including
19 4.5 hoisting and setting in position with cement mortar 1:3 (1 Cement : 3
coarse sand), cost of required centring, shuttering and finishing
smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 fine sand)
on exposed surfaces complete.
4.5.1 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate cum 951.00 6,774.05 6,442,121.55
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
4.5.2
nominal size). cum 3.00 6,269.80 18,809.40 -
7 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
TOTAL C O N C R E T E W O R K 10,677,357.08 -
8 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Walls (any thickness) including attached pilasters, buttresses, plinth
5.9.2
and string courses etc. sqm 14246.00 360.80 5,139,956.80 -
Suspended floors, roofs, landings, balconies and access platform.
5.9.3
sqm 719.00 401.65 288,786.35 -
5.9.4 Shelves (Cast in situ) sqm 16.00 401.65 6,426.40 -
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
5.9.5
sqm 2969.00 332.15 986,153.35 -
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 1739.00 453.35 788,375.65 -
5.9.7 Stairs, (excluding landings) except spiral-staircases. sqm 44.00 395.65 17,408.60 -
5.9.14 Extra for shuttering in circular work (20% of respective centring and
sqm
shuttering items).
Foundation Sqm 1156.02 39.29 45,419.96
Walls Sqm 13741.71 72.16 991,601.62
Coloumns Sqm 374.73 90.67 33,976.55
Small lintels not exceeding 1.5m clear span, moulding as in cornices,
5.9.15 window sills, string courses, bands, copings, bed plates, anchor
blocks and the like. sqm 54.00 196.45 10,608.30 -
5.9.16 Edges of slabs and breaks in floors and walls.
5.9.16.1 Under 20 cm wide metre 200.00 116.40 23,280.00 -
5.9.19 Weather shade, Chajjas, corbels etc., including edges. sqm 52.00 492.35 25,602.20 -
9 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and laying in position machine batched, machine mixed
and machine vibrated design mix cement concrete of specified grade
for reinforced cement concrete work including pumping of concrete
to site of laying but excluding the cost of centring, shuttering,
finishing and reinforcement. including Admixtures in recommended
27 5.33 proportions as per IS 9103 to accelerate, retard setting of concrete,
improve workability without impairing strength and durability as per
direction of Engineer-in-charge. M-25 grade reinforced cement
concrete by using 410kg. of cement per cum of concrete.
5.35 Add for using extra cement in the items of design mix over and
quintal
above the specified cement content therein. 500.00 742.75 371,375.00
BRICK WORK
Brick work with F.P.S. bricks of class designation 75 in foundation
29 6.1
and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 2311.00 4,677.25 10,809,124.75 -
10 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Half brick masonry with F.P.S. bricks of class designation 75 in
31 6.13
superstructure above plinth level upto floor V leve
6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm 155.00 692.80 107,384.00 -
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars
32 6.15 at every third course of half brick masonry (with F.P.S. bricks).
sqm 155.00 69.50 10,772.50 -
Brick edging 7cm wide 11.4cm deep to plinth protection with bricks
33 6.44 of class designation 75 including grouting with cement mortar 1:4 (1
cement : 4 fine sand). metre 371.00 38.15 14,153.65 -
STONE WORK
34 NSI-5 Boulder apron laid in wire crates (Providing and laying of boulder
apron laid in wire crates made with 4mm dia GI wire conforming to
IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally)
including 10% extra for laps and joints laid with stone boulders
weighing not less than 40 kg each.) Cum 1494.00 1,989.00 2,971,566.00
35 NSI-6 Providing and laying Pitching on slopes laid over prepared filter
media including boulder apron laid dry in front of toe of
embankment complete as per drawing and Technical specifications
37 NSI -8 Providing Moring made with 16mm dia M.S Bar as per size drawing
each
design & direction of Engineer-in-charge. 25.00 261.00 6,525.00
11 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
MARBLE WORK
Providing and fixing 18mm thick gang saw cut mirror polished
(premoulded and prepolished) machine cut for kitchen platforms,
vanity counters ,window sills , facias and similar locations of required
size of approved shade, colour and texture laid over 20mm thick
38 8.2 base cement mortar 1:4 (1 cement : 4 coarse sand) with joints
treated with white cement, mixed with matching pigment, epoxy
touch ups, including rubbing, curing moulding and polishing to edge
to give high gloss finish etc. complete at all levels.
Extra for fixing marble /granite stone over and above corresponding
basic item, in facia and drops of width upto 150 mm with epoxy resin
40 8.4 based adhesive including cleaning etc. complete.
metre 28.00 247.40 6,927.20 -
Extra for providing opening of required size & shape for wash
basins/ kitchen sink in kitchen platform, vanity counters and similar
41 8.5 location in marble/Granite/stone work including necessary holes for
pillar taps etc. including moulding, rubbing and polishing of cut
edges etc. complete each 15.00 386.60 5,799.00 -
TOTAL M A R B L E W O R K 81,700.00 -
W O O D A N D P. V. C. W O R K
12 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and fixing ISI marked flush door shutters conforming to IS:
2202 (Part I) non-decorative type, core of block board construction
42 9.21 with frame of 1st class hard wood and well matched commercial 3
ply veneering with vertical grains or cross bands and face veneers on
both faces of shutters :
35 mm thick including ISI marked Stainless Steel butt hinges with
9.21.1
necessary screws. sqm 63.00 1,909.55 120,301.65 -
Extra for providing lipping with 2nd class teak wood battens 25 mm
43 9.23 minimum depth on all edges of flush door shutters (over all area of
door shutter to be measured). Sqm 63.00 365.85 23,048.55 -
Extra for providing vision panel not exceeding 0.1 sqm in all type of
44 9.24
flush doors (cost of glass excluded) (overall area of door shutter to
9.24.1 Rectangular or square. Sqm 15.00 139.40 2,091.00 -
Extra for cutting rebate in flush door shutters (Total area of the
45 9.26 shutter to be measured). Sqm 35.00 104.55 3,659.25 -
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. kg 1067.00 116.90 124,732.30 -
13 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
9.96.2 250x16 mm each 15.00 189.00 2,835.00 -
Providing and fixing bright finished brass 100 mm mortice latch and
lock ISI marked with six levers and a pair of anodised (anodic
52 9.103 coating not less than grade AC 10 as per IS : 1868) aluminium lever
handles with necessary screws etc. complete (Best make of
approved quality). each 29.00 815.45 23,648.05 -
14 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
TOTAL W O O D A N D P. V. C. W O R K 449,922.35 -
STEEL WORK
10.1 Structural steel work in single section fixed with or without
54 connecting plate including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all complete kg 3179.00 67.70 215,218.30
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions
55 10.5 and corners, all necessary fittings complete, including applying a
priming coat of approved steel primer.
10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. sqm 2.10 3,073.85 6,455.09 -
10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. Sqm 126.00 2,142.10 269,904.60 -
57 10.7 Providing and fixing ball bearing for rolling shutters. Each 38.00 438.95 16,680.10 -
Extra for providing mechanical device chain and crank operation for
58 10.8 operating rolling shutters.
15 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators, side /top /centre hung, with beading and all
members such as F7D, F4B, K11 B and K12 B etc. complete of
standard rolled steel sections, joints mitred and flash butt welded
and sash bars tenoned and riveted, including providing and fixing of
59 10.11
hinges, pivots, including priming coat of approved steel primer, but
excluding the cost of other fittings, complete all as per approved
design, (sectional weight of only steel members shall be measured
for payment).
16 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box
for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of
1.5mm thick M.S. sheet with its top surface hacked for proper
62 10.18 bonding, top lid shall be screwed into the cast iron/ M.S. sheet box
by means of 3.3mm dia. round headed screws, one lock at the
corners. Clamp shall be made of 12mm dia M.S. bar bent to shape
as per standard drawing. each 42.00 142.95 6,003.90 -
Providing and fixing M.S. round holding down bolts with nuts and
63 10.19
washer plates complete. kg 16620.00 73.95 1,229,049.00 -
17 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
FLOORING
62 mm thick cement concrete flooring with concrete hardener
topping under layer 50 mm thick cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate 20mm nominal size) and
top layer 12mm thick cement hardener consisting of mix 1:2 (1
66 11.5 cement hardener mix : 2 graded stone aggregate 6mm nominal size)
by volume. Hardening compound is mixed @ 2 litre per 50kg of
cement or as per manufactures specifications. This includes cost of
cement slurry, but excluding the cost of nosing of steps etc.
complete. sqm 1167.00 588.90 687,246.30 -
Kota stone slab flooring over 20 mm (average) thick base laid over
and jointed with grey cement slurry mixed with pigment to match the
68 11.26 shade of the slab including rubbing and polishing complete with
base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
18 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and fixing Ist quality ceramic glazed wall tiles conforming to
IS : 15622 (thickness to be specified by the manufacture ) of
approved make in all colours, shades except burgundy, bottle green,
black of any size as approved by Engineer-in-Charge in skirting,
70 11.36 risers of steps and dados over 12 mm thick bed of cement Mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry
@ 3.3kg per sqm including pointing in white cement mixed with
pigment of matching shade complete.
sqm 403.00 836.65 337,169.95 -
19 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Marble stone flooring with 18mm thick marble stone (sample of
marble shall be approved by Engineer-in-charge) over 20 mm
74 11.23
(average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement slurry including rubbing and
11.23.3 Agaria White Sqm 65.00 2,158.30 140,289.50 -
TOTAL F L O O R I N G 1,688,019.47 -
ROOFING
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 stone aggregate 10mm and down gauge) including
75 12.21
finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per
standard design :
12.21.1 In 75x75mm deep chase metre 162.00 143.10 23,182.20 -
P/f of precoated galvanized iron profile sheets (size, shape and pitch
of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5%
total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the
sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches
while transportation and should be supplied in single length upto 12
metre or as desired by Engineer-in-charge. The sheet shall be fixed
76 12.50
using self drilling /self tapping screws of size (5.5x 55mm) with
EPDM seal or with polymer coated J or L hooks, bolts and nuts
8mm diameter with bitumen and G.I. limpet washers or with G.I.
limpet washers filled with white lead complete upto any pitch in
horizontal/ vertical or curved surfaces excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever
required.
sqm 1452.00 622.00 903,144.00 -
20 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc
coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns
epoxy primer on both side of the sheet and polyester top coat 15-18
77 12.51
microns using self drilling/ self tapping screws or with polymer coated
J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I.
plain and bitumen washers complete :
TOTAL R O O F I N G 997,775.00 -
FINISHING
78 13.1 12 mm cement plaster of mix :
13.1.2 1:6 (1 cement : 6 fine sand) sqm 4609.63 149.45 688,908.46 -
21 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
13.44 Finishing walls with water proofing cement paint of required shade :
85
13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm). sqm 833.00 57.85 48,189.05 -
13.61.1 Two or more coats on new work. sqm 1000.00 74.40 74,400.00 -
22 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
TOTAL F I N I S H I N G 3,793,038.66 -
ROAD WORK
Preparation & consolidation of sub grade with power road roller of 8
to 12 tonne capacity after excavating earth to an average of 22.5cm
depth, dressing to camber and consolidating with road roller
91 16.1
including making good the undulations etc. and re-rolling the sub
grade and disposal of surplus earth lead upto 50 metres.
Sqm 11608.00 81.29 943,614.32 -
23 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Fencing with angle iron post placed at required distance embedded
in cement concrete blocks, every 15th post, last but one end post
and corner post shall be strutted on both sides and end post on one
side only and provided with horizontal lines and two diagonals
interwoven with horizontal wires, of barbed wire weighing 9.38 kg
94 16.18
per 100 m (minimum), between the two posts fitted and fixed with
G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth
work and concrete work to be paid for separately). Payment to be
made per metre cost of total length of barbed wire used.
Supplying at site Angle iron post & strut of required size including
bottom to be split and bent at right angle in opposite direction for 10
95 16.19
cm length and drilling holes upto 10 mm dia. etc. complete.
Kg 2815.00 70.90 199,583.50 -
Providing and applying tack coat using hot straight run bitumen of
grade 80/ 100 including heating the bitumen, spraying the bitumen
96 16.30 with mechanically operated spray unit fitted on bitumen boiler,
cleaning and preparing the existing road surface as per
specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sum. sqm 11608.00 53.75 623,930.00 -
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of
stone chippings of 13.2mm and 11.2mm size respectively per 100
sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone
chippings of 13.2 mm and 11.2 mm size respectively including a tack
97 16.33
coat with hot straight run bitumen including consolidation with road
roller of 6 to 9 tonne capacity etc. complete. (tack coat to be paid for
separately) :
24 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and laying seal coat over prepared surface of road with
bitumen heated in bitumen boiler fitted with the spray set spraying
using 98 kg of bitumen of grade 80/100 and blinding surface with
0.90cum of stone aggregate of 6.7 mm size (Passing 11.2mm sieve
98 16.41 and retained on 2.36mm sieve) per 100 sum of road surface
including rolling and finishing with power road roller all complete.
Note : Seal coat items to be operated only with the prior approval of
Chief Engineer concerned.
sqm 11608.00 100.35 1,164,862.80 -
25 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and laying 60mm thick factory made cement concrete
interlocking paver block of M -30 grade made by block making
machine with strong vibratory compaction and of approved size and
102 16.68 design/ shape laid in required colour and pattern over and including
50mm thick compacted bed of course sand, filling the joints with
coarse sand etc. all complete as per the direction of Engineer-in-
charge. Sqm 4316.00 602.20 2,599,095.20 -
Providing and laying C.C. pavement of mix M25 with ready mixed
concrete from batching plant. The ready mixed concrete shall be
laid and finished with screed board vibrator , vacuum dewatering
103 16.75 process and finally finished by floating, brooming with wire brush etc.
complete as per specifications and directions of Engineer-in-charge.
(The panel shuttering work shall be paid for separately ).
cum 680.00 6,848.85 4,657,218.00 -
PILE WORK
104 20.1 Providing, driving and installing driven cast-in-situ reinforced cement
concrete piles of grade M-25 of specified diameter and length below
the pile cap, to carry safe working load not less than specified,
excluding the cost of steel reinforcement but including the cost of
shoe and the length of pile to be embedded in the pile cap etc. all
complete. (Length of pile for payment shall be measured from top of
shoe to the bottom of pile cap) :
105 20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV)
including installation of loading platform and preparation of pile head
or construction of test cap and dismantling of test cap after test etc.
complete as per specification & the direction of Engineer in-charge.
26 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
106 20.8 Lateral load testing of single pile in accordance with IS Code of
practice IS : 2911 (Part IV) for determining safe allowable lateral load
on pile :
20.8.2 Above 50 tonne and upto 100 tonne capacity pile. per test 1.00 27,411.40 27,411.40
ALUMINIUM WORK
Providing and fixing aluminium work for doors, windows, ventilators
and partitions with extruded built up standard tubular sections/
appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS : 1285, fixed with rawl plugs and
screws or with fixing clips, or with expansion hold fasteners including
necessary filling up of gaps at junctions, at top, bottom and sides
107 21.1 with required PVC/neoprene felt etc. Aluminium sections shall be
smooth, rust free, straight, mitred and jointed mechanically wherever
required including cleat angle, Aluminium snap beading for glazing /
panelling, C.P. brass / stainless steel screws, all complete as per
architectural drawings and the directions of Engineer-in-charge.
(Glazing and panelling to be paid for separately) :
27 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Pre-laminated particle board with decorative lamination on both
21.2.2
sides. sqm 4.00 1,089.75 4,359.00 -
21.16.2 Powder coated minimum thickness 50 micron aluminium each 8.00 72.60 580.80 -
WATER PROOFING
Providing and laying integral cement based treatment for water
proofing on horizontal surface at all depth below ground level for
under ground structures as directed by Engineer-in-Charge and
consisting of : i) Ist layer of 22mm to 25mm thick approved and
specified rough stone slab over a 25mm thick base of cement mortar
1:3 (1 cement : 3 coarse sand) mixed with water proofing compound
conforming to IS:2645 in the recommended proportion over the
leveling course (leveling course to be paid separately). Joints sealed
112 22.1
and grouted with cement slurry mixed with water proofing
compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1
cement: 3 coarse sand) mixed with water proofing compound in
recommended proportions. iii) Finishing top with stone aggregate of
10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly
embedded in the 2nd layer.
28 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and laying integral cement based treatment for water
proofing on the vertical surface by fixing specified stone slab 22 mm
to 25mm thick with cement slurry mixed with water proofing
compound conforming to IS:2645 in recommended proportions with
a gap of 20mm (minimum) between stone slabs and the receiving
surfaces and filling the gaps with neat cement slurry mixed with
113 22.2
water proofing compound and finishing the exterior of stone slab
with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with
neat cement punning mixed with water proofing compound in
recommended proportion complete at all levels and as directed by
Engineer-in-charge :
29 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
d) Finishing the surface with 20 mm thick jointless cement mortar of
mix 1:4 (1 cement :4 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Eng-in-charge
including laying glass fibre cloth of approved quality in top layer of
plaster and finally finishing the surface with trowel with neat cement
slurry and making pattern of 300x300 mm square 3mm deep.e) The
whole terrace so finished shall be flooded with water for a minimum
period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Eng-in-Charge :
30 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Uprooting weeds from the trenched area after 10 to 15 days of its
119 23.6 flooding with water including disposal of uprooted vegetation.
100 sqm 42.50 233.05 9,904.63 -
23.7 Fine dressing the ground 100 sqm 42.50 175.30 7,450.25 -
124 NSI - 16 Supply at site weed free seletion no.1 in carpet form 100 sqm 750.00 - 700.25 525,187.50
31 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Plumerea alba 6ft ht each 5.00 - 300.00 1,500.00
Cassia fistula 4-5 ft ht each 5.00 - 60.00 300.00
Azadirecta indica 5-6 ftht each 10.00 - 60.00 600.00
Bauhinia blakena 6 ft ht each 5.00 - 60.00 300.00
Delonix regia 8 ft ht each 8.00 - 80.00 640.00
Peltophorum terocarpum 6 ft ht each 5.00 - 80.00 400.00
Acacia auriculiformis 6 ft ht each 5.00 - 60.00 300.00
Mimosops elengi 6 ft ht each 5.00 - 200.00 1,000.00
Ficus retusa 8ft ht each 5.00 - 200.00 1,000.00
Lagerstromia flosrajani 8ft ht each 5.00 - 60.00 300.00
Bombax ceiba8ft ht each 2.00 - 200.00 400.00
Chorosea spesiosa 8ft ht each 3.00 - 500.00 1,500.00
Kanak champa 8ft ht each 2.00 - 100.00 200.00
Baugenvilla 1 ft ht (Kolkata varieties) each 10.00 - 20.00 200.00
Murraya exotica (hedge ) 1 ft ht each 20.00 - 10.00 200.00
Durenta golden ( edge) 1 ft ht each 25.00 - 8.00 200.00
Cassia biflora 4ft ht 8”potted each 2.00 - 80.00 160.00
Lagerstromia indica rosea 4ft ht 8”potted each 3.00 - 80.00 240.00
Bauhinia accuminata 2ft ht 8”potted each 2.00 - 200.00 400.00
Ticoma gaurichauri 2ft ht 8”potted each 2.00 - 80.00 160.00
Nyctanthes arbor-tristis (harsingar) each 3.00 - 100.00 300.00
Plumerea champa 6 ft ht each 5.00 - 800.00 4,000.00
32 of 187
INTERMODAL TERMINAL AT VARANASI (U.P.)
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
PLUMBING WORK
SUB HEAD:- 1 - SANITARY INSTALLATIONS & DRAINAGE
126 17.1 Providing and fixing water closet squatting pan (Indian type W.C.
pan) with 100mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures complete
including cutting and making good the walls and floors wherever
required :
1.1 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm
with integral type foot rests Each 0.00 3,392.80 -
127 17.3 Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous
china flushing cistern & C.P. flush bend with fittings & C.I.brackets,
40mm flush bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved municipal design
complete including painting of fittings and brackets, cutting and
making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. Each 9.00 4,784.60 43,061.40
128 17.7 Providing and fixing wash basins with C.P. brass pillar tap, 32mm
C.P. brass waste of standard pattern, including painting of fittings
and brackets, cutting and making good the walls and floors where
required.
17.7.2 White Vitreous china Wash basin of size 630 x 450mm with single
15mm C.P brass pillar tap. Each 8.00 2,010.35 16,082.80
129 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as
per IS 13983 with C.I. brackets and stainless steel plug 40 mm
including painting of fittings and brackets, cutting and making
good the walls wherever required
17.10.1 Kitchen sink with drain board
17.10.1.1 610x510 mm bowl depth 200 mm. Each 3.00 7,052.15 21,156.45
130 17.30 Providing and fixing in position 25 mm diameter mosquito proof
coupling of approved municipal design. Each 3.00 38.60 115.80
33 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
131 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete. Each 4.00 793.95 3,175.80
132 17.34 Providing and fixing toilet paper holder
17.34.1 C.P. brass Each 10.00 415.90 4,159.00
133 17.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
134 17.70.1 Bottle trap 31 mm single piece moulded with heifht of 270mm,
effective length of tail pipe 260mm from the centre of the waste
coupling 77mm breadth with 25mm minimum water seal, weighing
not less than 266gms. Each 9.00 494.90 4,454.10
135 17.70.2 Bottle trap 38mm single piece moulded with heifht of 270mm,
effective length of tail pipe 260mm from the centre of the waste
coupling 77mm breadth with 25mm minimum water seal, weighing
not less than 266gms. Each 10.00 518.15 5,181.50
136 17.71 Providing & fixing PTMT liquid soap container 109 mm wide, 125
mm high and 112 mm distance from wall of standard shape with
bracket of the same materials with snap fittings of approved quality
and colour, weighing not less than 105 gms. Each 9.00 228.85 2,059.65
137 17.73 Providing and fixing PTMT towel ring trapezoidal shape 215 mm
long, 200 mm wide with minimum distances of 37 mm from wall face
with concealed fittings arrangement of pproved quality and colour,
weighing not less than 88 gms. Each 9.00 541.50 4,873.50
138 17.78 Providing and fixing white vitreous china extended wall mounting
water closet of size 780x370x690 mm of approved shape including
providing & fixing white viterous china flushing cistern with dual flush
fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litre),
including seat cover, and cistern fittings, nuts, bolts and gasket etc.
complete. Each 1.00 10,100.90 10,100.90
139 17.80 Providing and fixing white vitreous china battery based infrared
sensor operated urinal of approx. size 610 x 390 x 370 mm having
pre & post flushing with water (250 ml & 500 ml consumption),
having water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of
Engineer-in-charge. Each 7.00 16,724.95 117,074.65
34 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
140 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400
micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse
sand) and a coat of neat cement, rounding the edges and making
and finishing the outlet complete.
Each 12.00 186.65 2,239.80
TOTAL CARRIED TO SUMMARY SHEET 233,735.35
NON DSR ITEMS
SUB HEAD- 1 SANITARY INSTALLATIONS & DRAINAGE
141 NS-1 Providing and fixing, uPVC pipes 6 Kg/Cm2 (IS: 4985) including all
fittings (plain or door) e.g. bends, junction, offsets, access pieces,
jointing with rubber ring/solvent cement joints including required
suports,cutting chase or holes in walls and floors and making good
where required.( For soil,waste,and Rain Water Pipes)
35 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
145 NS-5 Providing and fixing health faucet with 1 m PVC tube and swivel
hook including all fittings complete. Each 10.00 1,586.00 15,860.00
146 NS-6 Providing and fixing of fully automatic "NO TOUCH" hand drier
suitable to operate on 220 volts, single phase 50 hz, A.C. power
supply and directly plugged to power point complete.
Fully automatic Hand Drier- .UT-508 Each 4.00 6,950.00 27,800.00
147 NS-7 Providing and fixing Grab bar 450mm Long Also available (Jaguar
AHS-1503) Each 1.00 1,175.00 1,175.00
148 NS-8 Providing and fixing multi-floor trap fitting with maximum 3 inlets
32,40 or 50 mm size fabricated from 100/150 mm dia upvc pipes
and sockets,fixed to C.I. trap with lead caulked joint and set in
cement concrete as per standard drawing complete.
Each 13.00 1,262.00 16,406.00
149 NS-9 Providing and fixing in position 110x63 mm uPVC reducing elbow
including fixing to floor with cement mortar Each 6.00 119.00 714.00
150 NS-10 Providing and fixing END CAP or cleanout plug( Ceiling or Floor)
with suitable inset keys for opening, male threaded joint with socket
fixed to uPVC/SCI pipe complete in all respects.
36 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
TOTAL CARRIED TO SUMMARY SHEET 235,453.00
DSR ITEMS
SUB HEAD-2-WATER SUPPLY
153 18.8 Providing & fixing Chlorinated plolyviny Chloride (CPVC) Pipes,
having thermal stabilty for hot & cold wter supply, includign all CPVC
plain & brass threaded fittings, i/c fixing the pipe with clampls at 1.00
m spacing. This includes jointing of pipes & fittings with one step
CPVC solvent cement and cost of cutting chases and making good
the same including testing of joints complete as per direction of
Engineer in charge.
37 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
18.18.1 15 mm nominal bore. Each 0.00 288.50 -
18.18.2 20 mm nominal bore. Each 0.00 409.90 -
18.18.3 25 mm nominal bore Each 6.00 449.95 2,699.70
157 18.19 Providing and fixing gun metal non-return valve of approved quality
(screwed end)
18.19.2 32 mm nominal bore.
18.19.2.1 Horizontal Each 1.00 553.30 553.30
18.19.3 40 mm nominal bore.
18.19.3.1 Horizontal Each 0.00 683.75 -
18.19.6 80. mm nominal bore
18.19.6.1 Horizontal Each 7.00 2,504.30 17,530.10
158 18.32 Constructing masonry Chamber 30X30X50 cm, inside with 75 class
designation brick work in cement mortar 1:4 (1 Cement : 4 Coarse
sand) for stop cock, with C.I. surface box 100*100*75 mm (inside)
with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1
Cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal
size) necessary excavation foundation concrete 1:5:10 (1 cement : 5
fine sand : 10 graded stone aggregate 40mm nominal size) and
inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)
12 mm thick finished with a floating coat of neat cement complete as
per standard design:
18.32.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 6.00 1,157.75 6,946.50
159 18.38 Painting of GI pipes and fittings with synthetic enamel white paint
over a ready mixed priming coat, both of approved quality for new
work.
18.38.1 15 mm dia. nominal bore Metre 15.00 9.60 144.00
18.38.2 20 mm dia. nominal bore Metre 90.00 11.35 1,021.50
18.38.3 25 mm dia. nominal bore Metre 95.00 14.95 1,420.25
18.38.4 32 mm dia. nominal bore Metre 40.00 17.70 708.00
18.38.5 40 mm dia. nominal bore Metre 20.00 21.00 420.00
18.38.6 50 mm dia. nominal bore Metre 0.00 24.75 -
160 18.40 Painting of GI pipes and fittings with two coats of anti-corrosive
bitumastic paint of approved quality.
18.40.3 25 mm dia. nominal bore Metre 30.00 8.75 262.50
18.40.4 32 mm dia. nominal bore Metre 300.00 10.40 3,120.00
38 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
18.40.5 40 mm dia. nominal bore Metre 0.00 11.85 -
18.40.6 50 mm dia. nominal bore Metre 0.00 14.15 -
18.40.7 65 mm dia. nominal bore Metre 0.00 17.45 -
18.40.8 80 mm dia. nominal bore Metre 35.00 20.25 708.75
161 18.48 Providing and placing on terrace (at all floor levels) polyethylene
water storage tank ISI : 12701 marked with cover and suitable
locking arrangement and making necessary holes for inlet, outlet
and overflow pipes but without fitting and base support for tank.
Litre 2000.00 7.25 14,500.00
162 18.49 Providing and fixing C.P. brass bib cock of approved quality
conforming to IS:8931
18.49.1 a) 15 mm nominal bore Each 10.00 459.50 4,595.00
163 18.51 Providing and fixing C.P. brass long body bib cock of approved
quality conforming to IS standards and weighing not less than 690
18.51.1 15 mm nominal bore. Each 6.00 610.65 3,663.90
164 18.53 Providing and fixing C.P brass angle valve for basin mixer and
geyser points of approvedquality confirming to IS:8931
18.53.1 15 mm nominal bore Each 46.00 507.70 23,354.20
165 18.58 Providing and fixing PTMT Grating of approved quality and colour
18.58.1 Circular Type
18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 19.00 57.35 1,089.65
166 18.65 Providing & fixing PTMT soap dish Holder having length of
138mm,breadth 102mm, height of 75mm with concealed fitting
arrangements.Weighing not less than 106gms. Each 3.00 164.95 494.85
TOTAL CARRIED TO SUMMARY SHEET 307,227.30
NON DSR ITEMS
SUB HEAD- 2 WATER SUPPLY SYSTEM
167 N.S.-13 Providing and Fixing full way lever operated forged brass ball valve of
brass body with forged brass hard chromeplated steel ball tasted to
a pressure not less than 15 kg/sqcm with threaded / flanged joints
complete with nuts, bolts, gaskets, washers etc.
39 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
e) 40 mm dia Each 1.00 3,075.00 3,075.00
f) 50 mm dia Each 0.00 4,383.00 -
168 N.S.-14 Providing and fixing C.I. butterfly valves PN-1.0 complete with bolts,
nuts, EPDM S.S. Disc flanges Lever oprated as per IS 13095
complete.
a) 65 mm dia Each 0.00 2,200.00 -
b) 80 mm dia Each 1.00 2,432.00 2,432.00
c) 100 mm dia Each 0.00 2,992.00 -
d) 150 mm dia Each 0.00 4,980.00 -
169 NS-15 Providing and laying of HDPE pipes confirming to IS: 4984 type PE-
80 (6 kg/cm2) including all fittings wherever required e.g., tees,
bends of any degree, couplings, adapters, plugs, unions etc. and
jointing as manufacturer recommondation etc. including necessary
excavation and refilling complete in all respects. (For irrigation water
Supply )
32 mm OD Each 50.00 71.00 3,550.00
50 mm OD Each 0.00 117.00 -
110 mm OD Each 1257.00 549.00 690,093.00
170 NS-16 Providing and fixing M.S. puddle flanges fabricated out of 6 mm
thick M.S. plate of size 200 x 200mm plus dia of pipe of 750 mm
long pipe pieces to R.C.C. water tanks / R.C.C. walls. The entire
fitting shall be hot dipped galvanised.
a) 100mm dia Each 1.00 2,638.00 2,638.00
b) 80mm dia Each 2.00 1,859.00 3,718.00
c) 65mm dia Each 1.00 1,441.00 1,441.00
d) 50mm dia Each 2.00 1,136.00 2,272.00
e) 25mm dia Each 2.00 681.00 1,362.00
TOTAL CARRIED TO SUMMARY SHEET 811,250.00
DSR ITEMS
40 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
19.1.3 200 mm diameter Metre 340.00 462.15 157,131.00
172 19.3 Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5
coarse sand : 10 gradded stone aggregate 40 mm nominal size)
upto haunches of S.W. Pipes including bed concrete as per
standard design.
19.3.2 150 mm diameter Metre 150.00 456.45 68,467.50
19.3.3 200 mm diameter Metre 340.00 536.55 182,427.00
173 19.4 Providing and fixing square mouth S. W. Gully trap grade `A'
complete with C.I. grating brick masonry chamber with F.P.S
bricks and water tight CI cover with frame of 300 x 300 mm size
(inside) the weight of cover to be not less than 4.50 kg and frame to
be not less than 2.70 kg as per standard design
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with
frame (light duty) 455x610 mm internal dimensions, total weight of
cover and frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 8.00 8,507.00 68,056.00
41 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
176 19.8 Extra for depth for manholes
19.8.1 Size 90x80 cm
19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Metre 1.00 5,638.20 5,638.20
177 19.9 Constructing brick masonry circular type manhole 0.91 m internal dia
at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4
coarse sand), in side cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of
neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 40 mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished with
a floating coat of neat cement, all complete as per standard design :
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20
grade designation) 560 mm internal diameter conforming to
I.S.12592, total weight of cover and frame to be not less than 182
kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) including centering,
shuttering all complete. (Excavation, foot rests and 12mm thick
cement plaster at the external surface shall be paid for separately) :
19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 9.00 8,738.55 78,646.95
178 19.10 Extra for depth for circular manhole 0.91m internal dia at bottom
with beyond 0.91m to 1.67m.
19.10.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Metre 1.50 4,842.40 7,263.60
42 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
179 19.11 Constructing brick masonry circular type manhole 1.22 m internal dia
at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4
coarse sand), in side cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of
neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 40 mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished with
a floating coat of neat cement, all complete as per standard design :
19.11.1 1.68 m deep with S.F.R.C. cover and frame (heavy duty, HD-20
grade designation) 560 mm internal diameter conforming to
I.S.12592, total weight of cover and frame to be not less than 182
kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) including centering,
shuttering all complete. (Excavation, foot rests and 12mm thick
cement plaster at the external surface shall be paid for separately) :
19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 6.00 16,467.90 98,807.40
180 19.12 Extra for depth for circular manhole 1.68m internal dia (at bottom)
beyond 1.68 m to 2.29m.
19.12.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Metre 2.00 6,270.70 12,541.40
181 19.13 Constructing brick masonry circular type manhole 1.52 m internal dia
at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4
coarse sand), in side cement plaster 12 mm thick with cement
mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of
neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse
sand : 6 graded stone aggregate 40 mm nominal size), and making
necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) finished with
a floating coat of neat cement, all complete as per standard design :
43 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
19.13.1 2.30 m deep with S.F.R.C. cover and frame (heavy duty, HD-20
grade designation) 560 mm internal diameter conforming to
I.S.12592, total weight of cover and frame to be not less than 182
kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) including centering,
shuttering all complete. (Excavation, foot rests and 12mm thick
cement plaster at the external surface shall be paid for separately) :
19.13.1.1 With common burnt clay F.P.S. (non modular) bricks of class Each 34,976.25 139,905.00
designation 7.5 4.00
182 19.14 Extra for depth for circular manhole 1.52m internal dia at bottom
with beyond 2.30m.
19.14.1 With common burnt clay F.P.S. (non modular) bricks of class Metre
designation 7.5 1.00 14,842.95 14,842.95
183 19.16 Providing and fixing orange colour safety foot rest of minimum 6 mm
thick plastic encapsulated as per IS : 10910 on 12 mm dia. steel bar
conforming to IS: 1786 having minimum cross section as 23 mm x
25 mm and over all minimum length 263 mm and width as 165 mm
with minimum 112 mm space between protruded legs having 2 mm
tread on top surface by ribbing or chequering besides necessary and
adequate anchoring projections on tail length on 138 mm as per
standard drawing and suitable to with stand the bend test and
chemical resistance test as per specifications and having
manufacturer's permanent identification mark to be visible even after
fixing, including fixing in manholes with 30 x 20 x 15 cm cement
concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) complete as per design.
19.27.1 With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 Each 85.00 3,957.50 336,387.50
TOTAL CARRIED TO SUMMARY SHEET 1,478,156.10
44 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
NON DSR ITEMS
SUB HEAD-3- SEWRAGE & DRAINAGE
185 NS-14 Supply, Installation, Testing & Commissioning prefabricated Sewage
Treatment Plant of 10 KLD Capacity based on Moving Bed Bio
Reactor Process . Vendor has to get approval from client
/Archetect/Cunsultant on complete design parameters, necessary
drawings, BOQ before execution
Each 1.00 - 2,350,000.00 2,350,000.00
186 Providing all material & constructing brick masonary recharge pit of
4.0x3.5 x 3.5 m depth with brick work in cement mortar 1:4 ( 1
cement : 4 coarse sand) with 100mm dia weep holes at side walls @
500 mm vertically& horizontally center to center, 200 mm thick RCC
top slab in cement concrete (1:2:4 ) along with periferial & two nos.
of intermediate RCC beams of size 250 x 450mm R/ F of slab 12
mm tor steel at bottom and 10 mm at topwith a spacing of 125 mm
c/c, 4 nos 16 mm tor steel bars at bottom & 2 nos. 12 mm tor steel
bars at top for beams with 8 mm stirrups @ 150 mm c/c, 2 nos.
heavy duty SFRC cover of 560 mm dia,poly propelene coated rungs
@ 300 mm c/c embeded in CC ( 1 : 2 : 4 ) blocks of 200 x 200 x 200
mm, 150 mm thick PCC in 1: 4 : 8 below footing with 150 mm
projection, internal & external plaster in CM 1 : 4, necessary
excavation, backfilling & disposal of surplus earth upto a lead of 50m
complete in all respect including drilling percolation Bore Hole of
200/250 mm dia upto 50 meter depth with reverse rotary method in
all types of soil including costs for mobilisation of Rig, including deve
45 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
187 Providing and constructing brick masonry desilting chamber of size
200x150xupto300 cms depth inside with 75 class designation brick
work 345mm/230mm thick in cement mortar 1:4 (1cement:4 coarse
sand) with weep holes all around , SFRC cover heavy duty 560mm
dia and 150 mm thick R.C.C. top slab 1:2:4 mix(1 Cement : 2
coarse sand : 4 graded stone aggregate 20mm nominal size)
including necessary excavation, back filling, disposal of surplus earth
as directed, foundation concrete 1:5:10 mix (1 cement : 5 fine sand :
10 graded stone aggregate 40mm nominal size) below masonry
walls with 150mm projection at either side including necessary baffle
wall inside(as per std. drawing) , excavation,back filling and disposal
of surplus earth upto a lead of 200 mtr., poly propelene coated Each 1.00 45,760.00 45,760.00
TOTAL CARRIED TO SUMMARY SHEET 2,730,760.00
DSR ITEMS
SUB HEAD 4-BOREWELL
188 24.1 Boring/drilling bore well of required dia for casing / strainer pipe, by
suitable method prescribed in IS:2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per
direction of Engineer - in-charge, upto 90 metre depth below ground
level.
189 24.2 Boring/drilling bore well of required dia for casing / strainer pipe, by
suitable method prescribed in IS:2800 (part I), including collecting
samples from different strata, preparing and submitting strata chart/
bore log, including hire & running charges of all equipments, tools,
plants & machineries required for the job, all complete as per
direction of Engineer - in-charge, beyound 90 metre & upto 150
metre depth below ground level.
46 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
190 24.10 Supplying, assembling, lowering and fixing in vertical position in
bore well, ERW (Electric Resistance Welded) FE 410 mild
steel screwed and socketed/ plain ended c asing pipes of required
dia, conforming to IS: 4270, of reputed & approved make, including
painted with outside surface with two coats of anticorrosive
paint of approved brand and manufacture, including required
hire & labour charges, fittings & accessories, all complete, for
all depths, as per direction of Engineer- in-charge.
24.10.3 200 mm nominal size dia having minimum wall thickness 5.40 mm Mtr 50.00 1,638.55 81,927.50
191 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,
including providing gravel fine/ medium/ coarse, in required grading
& sizes as per actual requirement, all complete as per direction of
Engineer- in -charge. Cum. 15.00 987.85 14,817.75
192 24.12 Development of tube well in accordance with IS:2800 (part I) and IS:
11189, to establish maximum rate of usable water yield without sand
content (beyond permissible limit), with required capacity air
compressor, running the compressor for required time till well is fully
developed, measuring yield of well by ''V'' notch method or any other
approved method, measuring static level & draw down etc. by step
draw down method, collecting water samples & getting tested in
approved laboratory, i/c disinfection of tubewell, all complete,
including hire & labour charges of air compressor, tools &
accessories etc., all as per requirement and direction of Engineer-in-
Charge.
Hour 10.00 677.10 6,771.00
193 24.13 Providing and fixing suitable size threaded mild steel cap or spot as
per requirement, all complete for borewell of
24.13.3 200 mm nominal size dia Each 1.00 243.90 243.90
194 24.14 Providing and fixing M.S. clamp of required dia to the top of
casing/ housing pipe of tubewell as per IS: 2800 (part I), including
necessary bolts & nuts of required size complete
47 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
TOTAL CARRIED TO SUMMARY SHEET 159,617.00
NON DSR ITEMS
48 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Set of two pumps (1 Working + 1 Standby)
Capacity - 50 LPM
Head - 30.0 Mtr. Set 1.00 95,000.00 95,000.00
49 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
199 1.5 Painting of G.I. pipes with two or more coats of synthetic enamel
paint of approved quality over a coat of red oxide zinc chromate
primer as directed by the Engineer-in-Charge (shade as per pipe
colour code).
201 1.7 Providing and fixing of cast iron double flanged dual plate type check
valves (PN-16) including 2 nos. matching flanges, nuts, bolts, 3.0
mm thick thick insertion neoprene gasket.
1.7.1 50 mm dia Each 0.00 3,005.00 -
1.7.2 65 mm dia Each 1.00 2,850.00 2,850.00
1.7.3 80 mm dia Each 1.00 4,174.00 4,174.00
1.7.4 100 mm dia Each 0.00 4,768.00 -
202 1.8 Providing & fixing of resilient rubber neoprene lined style arch
vibration eliminators suitable for raw water upto pressure 20 kg/cm2.
203 1.9 Providing and fixing of CI Y type suction strainer with gunmetal or
brass internal parts installed outside water tanks.
50 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
1.9.1 65 mm dia Each 2.00 13,350.00 26,700.00
1.9.2 80 mm dia Each 0.00 16,642.00 -
0.00
204 1.10 Providing and fixing forged brass ball valve of brass body with hard
chrome plated steel ball inside PTFE (Teflon) seat & ring with
chrome plated centre handle with female BSP threads complete in
all respects.
1.10.1 32 mm dia Each 2.00 1,610.00 3,220.00
1.10.2 40 mm dia Each 2.00 2,471.00 4,942.00
205 1.11 Controllers with low voltage relays, stainless steel probes and PVC
shroud, wiring from tank top to probes of required length. (No of
probes as required for function of each controller).
1.11.1 For Filter Feed Pumps
206 To cut off duty pump on low water level in the UG Raw water tank
and high water level in the UG Domestic water tank and To start
pump at low water level in the UG Domestic water tank. Each 1.00 3,750.00 3,750.00
1.11.2 For Drainage Sump Pumps.
51 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
207 To cut off duty pump on low water level in the sump, To start pump
at high water level in the sump and both pumps start when water
over flowing. Each 1.00 3,676.00 3,676.00
52 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Digital Multifunction meter for Voltage, Current & KW with selector
switch. Each with 3nos. Of 2A SP MCB & 3nos 125/5A CTs
(125A/500V) rating.
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC
Sleeves
OUTGOINGS
8 Nos. 16/25/32A DP MCB (10 KA) C curve
05 Nos. DOL starter with self illuminated Push button for ON & OFF
and suitable rating of contactor and O/L relays,indication lamps
suitable for 3 HP Motor.
03 Nos. DOL starter with self illuminated Push button for ON & OFF
and suitable rating of contactor and O/L relays,indication lamps
suitable for 1.5 HP Motor.
Supply of Water Pump Panel as described above. Each 1.00 330,500.00 330,500.00
Receiving, fixing, testing & commissioning of Water Pump 34,000.00 34,000.00
Panel as described above Each 1.00
Note:
53 of 187
ESTIMATE FOR FIRE FIGHTING WORKS AT INTERMODAL TERMINAL, VARANASI
ABSTRACT OF COST
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
FIRE FIGHTING WORK
SUB HEAD - I :- PIPING, HYDRANT AND ACCESSORIES
SYSTEM
54 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
2.3 40 mm dia RM 0.00 21.00 -
2.4 50 mm dia RM 0.00 25.00 -
2.5 65 mm dia RM 0.00 27.00 -
2.6 80 mm dia RM 30.00 29.00 870.00
2.7 100 mm dia RM 0.00 31.00 -
2.8 150 mm dia RM 0.00 38.00 -
55 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing & Fixing Gun-metal 63 mm dia short size branch pipes
215 NS-6 with 20 mm dia nozzle with 63 mm instantaneous coupling ISI
marked (IS:903) Each 30.00 2,838.00 85,140.00
NS-7 Providing and fixing standard firemans axe with heavy rubber
216
handle. Each 30.00 622.00 18,660.00
Providing and fixing weather proof cabinet of size not less than 0.75
x 0.6 x 0.25 mtr made out of M.S. sheet not less than 1.5 mm thick
having central opening and 4 mm thick glazed glass doors (Two
nos.) suitably marked on the outside 'with the letters "FIRE HOSE"
217 NS-8 including necessary locking arrangement and painting in red colour
suitable to accommodate, external yard hydrant valve, 2 nos 15
mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall
be mounted on boundary wall complete as required.
Nos. 30.00 8,509.00 255,270.00
Providing and fixing dial type pressure gauge with isolation cock
218 NS-9 and copper pipe on main header Dial diameter 100 mm celebration
0-14 / sq. cm. Each 30.00 881.00 26,430.00
ISI marked fire extinguisher Mech. Foam type capacity 50 litres with
220 NS-11 gunmetal cap and nozzle, trolly mounted and complete in all
respects including initial fill Each 1.00 33,105.00 33,105.00
56 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
ISI marked (IS:2878) Fire and wall suspension bracket, Extinguisher,
Trolley mounted carbon-dioxide type capacity 22.5 Kg. Flat base
including valve, discharge hose of not less than 10mm dia 1m long
221 NS-12 complete in all respects including wheeled trolley, carrying handle
and initial fill with CO2 gas as per IS: 307-1996 filled to a filling ratio
of not more than 0.667.
No. 1.00 28,886.00 28,886.00
Providing and fixing gun metal ball valve suitable for pressure 15
222 NS-13 Kg/Cm2 and confirming to IS: 778 of the following size including
providing necessary union / flange
Providing & fixing cast iron Slim seal dual type non-return valves
(PN1.6) complete with matching flanges, rubber insertion, nuts, bolts
224 NS-15
and washer complete as required.etc. of following sizes.
Providing and fixing Orifice plate made out of 8mm thick stainless
226 NS-17 plate for pipe to reduce pressure upto 3.5 kg/sqcm complete in all
respects
57 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing and fixing inlet breeching having C.I. body four way gun
metal 63 mm dia instantaneous inlets conforming to IS 903 fitted
with non return valves, 25 mm dia gun metal drain cock, blank
227 NS-18
cap, brass chains and 150 mm dia flanges with all accessories
suitable for local fire tender complete as required.
No. 1.00 14,506.00 14,506.00
Providing and fixing inlet breeching having C.I. body Two way gun
metal 63 mm dia instantaneous inlets conforming to IS 903 fitted
with non return valves, 25 mm dia gun metal drain cock, blank
229 NS-20
cap, brass chains and 150 mm dia flanges with all accessories
suitable for local fire tender complete as required in Down Comer
Riser Nos. 1.00 9,601.00 9,601.00
58 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Providing & fixing double flanged flexicon rubber expansion joint with
unit control of standard length as per maufacturers specs. Tested to
232 NS-23 a pressure of 15Kg/Sqcm including rubber gaskets, flanges, nuts,
bolts and washers complete as required.
59 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Common base plate for (a) and (b) from M.S. Channel for required
size.
Water Cooled Diesel engine of speed 1800 RPM for the above
pump with automatic starting mechanism and other accessories
including fuel tank (fabricated from 3mm MS sheet painting with two
coats of synthetic enamel paint over a coat of primer) capacity 600
Its (fitted with Magnetic oil level indicator, MH with cover drain valve,
Air vent hydraulic pumps including structural supports (painted with
approved shade), 2 Nos. x 12 volt battery, heat exchanger with
necessary piping connections & fittings flexible coupling, coupling
guard & exhaust pipe as per drawing complete as required.
Common base plate for (a) and (b) from M.S. channel of required
size.
60 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Common base plate for (a) and (b) from M.S. channel as required
size.
61 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
A INCOMER
C BUS-BAR
1 Set of 300A TPN Aluminium Bus Bar with colour coded PVC
i)
Sleeves
D OUTGOINGS
62 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
63 of 187
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
ABSTRACT OF COST
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
ELECTRICAL WORKS
SUBHEAD - I - WIRING
1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable
in surface / recessed steel conduit, with modular switch, modular
239
plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.
1.4 Wiring for twin control light point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed
steel conduit, 2 way modular switch, modular plate, suitable GI box
240
and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper
conductor single core cable etc as required.
Point 8.00 1,069.00 8,552.00 -
1.7 Wiring for circuit/ submain wiring alongwith earth wire with the
following sizes of FRLS PVC insulated copper conductor, single
241
core cable in surface/ recessed steel conduit as required
a) 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 830.06 200.00 166,011.00 -
b) 1.7.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 5.00 509.00 2,545.00 -
c) 1.7.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Metre 50.00 803.00 40,150.00 -
64 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated
copper conductor single core cable in surface/ recessed steel
243 conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
Metre 525.00 233.00 122,325.00 -
1.6 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated
copper conductor single core cable in surface/ recessed steel
244 conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper
conductor single core cable for loop earthing as required.
Metre 253.00 359.00 90,827.00 -
1.31 Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and fixing 3
245
pin 5/6 amps modular socket outlet and 5/6 amps modular switch,
connection etc. as required. Each 21.00 303.00 6,363.00 -
1.32 Supplying and flxing suitable size Gl box with modular plate and
cover in front on surface or in recess, including providing and flxing 6
246
pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps
modular switch, connection, painting etc. as required. Each 33.00 395.00 13,035.00 -
NSI Supply and fixing suitable size of G.I. box with modular plate and
cover in front on surface or in recess including providing and fixing 2
247
nos. 5 pin 5/6A socket outlet and on 1 nos. 5/6A modular type
switch, connection, painting etc. is required. (Comp. point) Each 27.00 - 567.00 15,309.00
2.18 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket
outlet, with 2 pole and earth, metal enclosed plug top along with 20
248 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in
recess, with chained metal cover for the socket out let and complete
with connections, testing and commissioning etc. as required. Each 8.00 954.00 7,632.00 -
65 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
1.24 Supplying and fixing following modular switch/ socket on the existing
249 modular plate & switch box including connections but excluding
modular plate etc. as required
a) 1.24.6 Telephone socket outlet Nos 32.00 95.00 3,040.00 -
b) 1.24.7 TV antenna outlet Nos 1.00 94.00 94.00 -
1.27 Supplying and fixing following size/ modules, GI box along with
250 modular base & cover plate for modular switches in recess etc as
required.
1.27.1 1 or 2 Module (75mmX75mm) for fan reguater, Tv & Tele. Outlet,
a)
Bell push & Lan socket Nos 91.00 166.00 15,106.00 -
1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid
copper conductor PE insulated, shielded with fine tinned copper
251
braid and protected with PVC sheath in the existing surface/
recessed steel/ PVC conduit as required Mtr 20.00 28.00 560.00 -
1.20 Supplying and fixing of following sizes of steel conduit along with
accessories in surface/recess including painting in case of surface
254
conduit, or cutting the wall and making good the same in case of
recessed conduit as required.
1.20.2 25 mm ( for telephone, Tv & Sub main & Circuits, and lan conduit)
a)
Mtr 514.00 142.00 72,988.00 -
1.20.3 32 mm ( for telephone, Tv & Sub main & Circuits, and lan conduit)
b)
Mtr 295.00 193.00 56,935.00 -
66 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
1.39 Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible,
PVC insulated, copper cable, in PVC sleeve of suitable size on the
255
floor/ wall, or side of the table/ door etc. as required.
Mtr 10.00 21.00 210.00 -
67 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
NSI Supply of indoor industrial luminaire for ceiling mounting with high
grade Polycarbonate housing and cover suitable for 1x28W lamp
261
complete with all accessories. (Philips cat-TCW 450 1XTL5-28W
EBT) Each 3.00 - 3,824.00 11,472.00
68 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
NSI Supplying of 300 mm dia medium duty fresh Air Exhaust fan,
263 complete with mounting rings frame complete with louvers &
shutters as reqd. Each 26.00 - 1,830.00 47,580.00
1.25 Supplying and fixing stepped type electronic fan regulator on the
264 existing modular plate switch box including connections but
excluding modular plate etc. as required Each 37.00 284.00 10,508.00 -
NSI Supply & fixing of 15W Special GLS Lamp. Each 1.00 - 15.00 15.00
1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230
265
volts, complete as required Each 1.00 61.00 61.00 -
69 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
1.50 Installation of exhaust fan in the existing opening, including making
269 good the damage, connection, testing, commissioning etc. as
required.
i 1.50.1 Upto 450 mm sweep Each 26.00 204.00 5,304.00 -
1.51 Extra for fixing the louvers shutters complete with frame for a
270
exhaust fan of all sizes Each 26.00 89.00 2,314.00 -
70 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
i MAIN BOARD
INCOMING :
100 Amp FPMCCB having breaking capacity - 35 KA with
Ics=Icu=35 KA, with Rotary Handle operating Mechanism - 1 No.
BUSBAR:
125 Amp. 4 strip Al. Busbar.
OUTGOING :
63 Amp TP MCB having breaking capacity - 15/16 KA - 4 Nos.
Set 1.00 - 47,556.00 47,556.00
2.7 Supplying and fixing following way prewired SP&N MCB distribution
board of steel sheet for 240 volts on surface/ recess complete with
loose wire box, terminal connectors for all incoming and outgoing
circuits, duly prewired with suitable size FR PVC insulated copper
conductor up to terminal blocks, tinned copper bus bar, neutral link,
earth bar, din bar, detachable gland plate, interconnections, powder
painted including earthing etc. as required. (But without MCB/
RCCB/ Isolator)
71 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
i 2.8.5 4 way (4 + 12), Double door Each 2.00 7,357.00 14,714.00 -
ii 2.8.7 8 way (4 + 24), Double door Each 3.00 10,405.00 31,215.00 -
2.8.8 12 way (4 + 36), Double door Each 1.00 12,782.00 12,782.00 -
2.12 Supplying and fixing following rating, double pole, 240 volts, isolator
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
2.12.1 40 amps Each 2.00 218.00 436.00 -
Supplying and fixing following rating, four pole, 415 volts, isolator in
273 2.13 the existing MCB DB complete with connections, testing and
commissioning etc. as required.
i 2.13.1 40 amps Each 3.00 659.00 1,977.00 -
ii 2.13.2 63 amps Each 3.00 670.00 2,010.00 -
2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C"
curve, miniature circuit breaker suitable for inductive load of following
274
poles in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
i 2.10.1 Single Pole Nos. 129.00 169.00 21,801.00 -
2.11 Supplying and fixing single pole blanking plate in the existing MCB
275
DB complete etc. as required. Each 21.00 7.00 147.00 -
72 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
SUBHEAD-IV- EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
including accessories, and providing masonry enclosure with cover
276 5.4 plate having locking arrangement and watering pipe of 2.7 metre
long etc. with charcoal/ coke and salt as required.
Sets 20.00 4,490.00 89,800.00 -
73 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
SUBHEAD - V - MISCELLANEOUS ITEMS
74 of 187
PROVIDING 1 X 315 KVA ELECTRIC SUB-STATION FOR INTERMODAL TERMINAL, VARANASI.
ABSTRACT OF COST
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
SUBHEAD - VI - SUBSTATION EQUIPMENTS
284 NSI TWO POLE STRUCTURE
75 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Anti Climbing devices on each pole made out of 2 mm barbed wire
viii
coiled alongwith pole.
ix Danger Notice Boards with Skull & Bones in red colour made out
of 14 SWG sheet in Hindi & English with voltage indicated.
x Supplying & installing 150 mm dia GI pipe - 10 Mtr.
xi Earthing & GI Strips.
xii Stay Assembly. Set 1.00 - 104,090.00 104,090.00
INCOMER
1) One. Incoming panel equipped with air insulated Metal clad 630
Amps. Housing.
76 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
6) One three phase horizontal draw out type resin cast line type
potential transformer of 11KV/110 V, 100 VA burden per phase
class 1.0 accuracy connected star/star on HV & LV sides with HV
and LV fuses, isolating plugs, for HV side and LV connection.
7) One strip heater to prevent absorption of moisture. Set 1.00 - 638,268.00 638,268.00
77 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
288 BUS TRUNKING
Supplying, installation, including suspension, testing and
commissioning of following capacity bus trunking with aluminium
bus bars in 1.6mm thick sheet steel enclosure in convenient
sections for use on, 3 phase, 4 wire, 415 volts, 50 Hz, A.C. supply
3.50
including jointing of sections, flexible joints, expansion joints,
bends and earthing with 2 runs of galvanised iron strips,
suspenders, angle iron bracket, steel fasteners, connecting to
earthing system etc. as required.
a) 3.5.1 800 amps Mtr. 20.00 8,473.00 169,460.00 -
250 Amp 415 V TPN MCCB having breaking capacity - 35 KA, with
Ics=Icu=35 KA, with Rotary Handle operating Mechanism - 1 No.
(0-250 A) Digital Ammeter with selector switch & 250/5 C.T.'s - 1
Set
0 - 500 Volt Voltmeter with selector switch - 1 Set
RYB Indication lamps with backup fuses - 1 Set of three
Power factor meter - 1 Set
8 step APFC relay with aux. contactor and timer - 1 Set
OUTGOING :
78 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
630 Amp 415 V TPN MCCB having breaking capacity - 50 KA, with
Ics=Icu=50 KA, with Rotary Handle operating Mechanism - 1 Nos.
(0-630 A) Digital Ammeter with selector switch & 630/5 C.T.'s - 1
Set
BUS BAR
800 Amp 4 strip Al. busbar
OUTGOING:
400 Amp 415 V TP MCCB having breaking capacity - 35KA, with
Rotary Handle operating Mechanism - 2 No.
250 Amp 415 V TP MCCB having breaking capacity - 35KA, with
Rotary Handle operating Mechanism - 1 No.
100 Amp 415 V TP MCCB having breaking capacity - 35KA, with
Rotary Handle operating Mechanism - 4 No.
63 Amp 415 V TP MCCB having breaking capacity - 25KA, with
Rotary Handle operating Mechanism - 4 No.
79 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
BUS BAR
500A strip Al. bus bars with heat shrinkable colored PVC sleeves 1
Set
OUTGOING
250 Amp 415 V TP MCCB having breaking capacity - 35KA, with
Rotary Handle operating Mechanism - 2 No.
100 Amp 415 V TP MCCB having breaking capacity - 35KA, with
Rotary Handle operating Mechanism - 5 No.
63 Amp 415 V TP MCCB having breaking capacity - 25KA, with
Rotary Handle operating Mechanism - 1 No.
80 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
16 Amp. TP MCB - 4 Nos. Set 1.00 - 298,294.00 298,294.00
81 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Start-stop switch with key
Water temperature indication
Lubrication oil pressure indication
Lubrication oil temperature indication
Battery charging indication
RPM indication
Over speed indication
Low lub. Oil trip indication
Engine Hours indication
Alternator:
Synchronous alternator rated at 250 KVA, 415 volts at 1500 RPM,
3 phase 50 Hz, AC supply with 0.8 lagging power factor at site
condition. The alternator shall be having SPDP enclosure,
brushless, continuous duty, self-excited and self-regulated through
AVR conforming to IS: 4722 / BS 2613 suitable for tropical
conditions and with class-F/H insulation.
Base Frame & Foundation:
Both the engine and alternator shall be mounted on suitable base
frame made of MS channel with necessary reinforcement which
shall be installed on suitable cement concrete foundation and
vibration isolation arrangement as per recommendations of
manufacturer.
Fuel Tank:
Daily service fuel tank of 990 liters capacity fabricated out of 3mm
thick MS sheet complete with all standard accessories and fuel
piping between fuel tank and diesel engine with MS class 'C' pipes
of suitable dia. Complete with valves, level indications &
accessories as required.
Exhaust System:
Dry exhaust manifold with residencial exhaust silencer and
catalytic converter.
Starting System:
12V / 24 V DC starting system comprising of starter motors:
voltage regulator and arrangement for initial excitation. Complete
with suitable nos. of batteries.
82 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Automatic Mains Failure Panel
Fabricating, installing, testing & commissioning of automatic mains
failure control including auto by-pass panel, suitable for 250 KVA
silent type DG set complete with relays, timers, set of CTs for
metering & protection and energy analyser to indicate currents,
phase and line voltages, frequency, power factor, KWH, KVARH &
provision for overload, short circuit, restricted earth fault, under
frequency, control cabling from AMF panel to diesel engine and
elsewhere if required all complete and interlocking including the
following:
630Amp 415 V FP MCCB having breaking capacity - 65 KA, with
short circuit, earth fault & over-current relay - 2 Nos.
Auto / Manual / Test / Off selector switch.
2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos.
under voltage relay.
3 Sets of current transformers 15 P 10 accuracy for protection and
15 VA class-I for metering
Energy analyser unit to indicate current voltage frequency power
factor and KWH.
Indicating lamps for load on mains and load on set
Fuse for instruments.
Battery charger, complete with transformer / rectifier, D.C.
voltmeter and ammeter, selector switch for trickle, off and boost
and current adjustment.
Main supply failure monitor
Supply failure timer
Restoration timer
Control unit with three impulse automatic engine start / stop and
failure to start lockout
Impulse counter with locking and reset facility
ON / OFF / Control circuit switch with indicator
Audio / video annunciation for :
High water temperature
Low lubricating oil pressure
Engine over speed
Over current & earth fault
Engine fails to start
Full load / maximum load warning
Required control cabling from AMF panel to DG set Set 1.00 - 2,335,256.00 2,335,256.00
83 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
TOTAL SUBHEAD - VII - 2,335,256.00
84 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
L.T. CABLES
Supplying of XLPE insulated, PVC sheathed 1.1 KV grade
299 NSI aluminium/copper conductor armoured power cable as per IS :
7098 of following sizes:
i 3.5 x 240 sq.mm. Mtr. 650.00 - 2,231.00 1,450,150.00
ii 3.5 x 185 sq.mm. Mtr. 20.00 - 1,765.00 35,300.00
iii 3.5 x 95 sq.mm. Mtr. 50.00 - 964.00 48,200.00
iv 3.5 x 50 sq.mm. Mtr. 60.00 - 571.00 34,260.00
v 3.5 x 35 sq.mm. Mtr. 170.00 - 443.00 75,310.00
vi 3.5 x 25 sq.mm. Mtr. 300.00 - 359.00 107,700.00
vii 4 x 16 sq.mm. Mtr. 20.00 - 174.00 3,480.00
viii 2 x 16 sq.mm. Mtr. 100.00 - 210.00 21,000.00
85 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Laying of one number PVC insulated and PVC sheathed / XLPE
301 7.50 power cable of 1.1 KV grade of following size in the existing RCC/
HUME/ METAL pipe as required.
7.5.1 Upto 35 sq. mm Mtr. 88.50 16.00 1,416.00 -
7.5.2 Above 35 sq. mm and upto 95 sq. mm Mtr. 16.50 25.00 412.50 -
7.5.3 Above 95 sq. mm and upto 185 sq. mm Mtr. 3.00 33.00 99.00 -
7.5.4 Above 185 sq. mm and upto 400 sq. mm Mtr. 97.50 58.00 5,655.00 -
Laying and fixing of one number PVC insulated and PVC sheathed
302 7.70 / XLPE power cable of 1.1 KV grade of following size on wall
surface as required.
7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr. 29.50 24.00 708.00 -
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS
7.7.2
flat clamp) Mtr. 5.50 70.00 385.00 -
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm
7.7.3
MS flat clamp) Mtr. 1.00 81.00 81.00 -
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm
7.7.4
MS flat clamp) Mtr. 32.50 115.00 3,737.50 -
Providing, laying and fixing following dia RCC pipe NP2 class (light
duty) in ground complete with RCC collars, jointing with cement
304 14.14
mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm
deep) and refilling etc as required.
i 14.14.2 150 mm dia Mtr. 100.00 384.00 38,400.00 -
ii 14.14.3 250 mm dia Mtr. 50.00 455.00 22,750.00 -
86 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
iii 14.14.4 300 mm dia Mtr. 30.00 566.00 16,980.00 -
Carbon dioxide (CO2) type fire extinguisher with suitable base pipe
i NSI & horn (conforming to IS 2876) with cylinders, fully charged of
capacity 4.5 kgm. Set 16.00 - 12,668.00 202,688.00
Providing fire bucket stand (pipe frame) suitable for 6 Nos. Fire
ii NSI
buckets of 9 ltr. Capacity with clean sand as reqd. Set 2.00 - 1,979.00 3,958.00
vii NSI Supplying Rubber hand gloves suitable for 11 KV. Set 2.00 - 594.00 1,188.00
87 of 187
PROVIDING HIGH MAST FITTINGS, EXTERNAL STREET LIGHTING AT INTERMODAL TERMINAL, VARANASI
ABSTRACT OF COST
SL.NO DESCRIPTION DSR AMOUNT (In Rs.) NON DSR AMOUNT (In Rs.)
PART-III
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
SUBHEAD - X - POLE'S & FITTING
Supply of (BOP1130) 11 mtr long hot dip galvanised octagonal
poles with 210 mm bottom A/F & 90 mm top A/F made up of 3 mm
NSI thick HT sheet along with base plate of size 300X300X20mm with
maximum wind speed of 169 Km/hr along with foundation bolts &
306 etc. as required. Each 28.00 - 39,021.00 1,092,588.00
Supply of Single Arm Bracket 1000 mm long made up of 48 mm
307 dia G.I. pipe. Each 27.00 - 2,323.00 62,721.00
Supply of Double Arm Bracket 1000 mm long made up of 48 mm
308 dia G.I. pipe. Each 1.00 - 2,837.00 2,837.00
88 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Supplying, installing, testing & commissioning of HID IntegralPost
Top luminaire copper dust finish cast aluminium spigot and spun
aluminium canopy fixed with opal polycarbonate enclosure with 70
312 NSI
MH lamp, complete with all accessories required. (Bajaj cat no -
BNCL 70 MH 0 COMPLETE)
Each 4.00 - 16,312.00 65,248.00
Supplying & fixing of weather proof box of size 200 x 160 x 90mm
polycarbonate box complete with hinged cover and gasket, earth
stud, locking arrangement & mounting clamps. The box shall be
provided with 4 way connector 10A- SP MCB, pdg. with din
315 NSI channel. The box shall be suitable for 2 nos. opening suitable for 4
core 6 sq.mm armoured cable. The box shall be IP : 65 protection
etc. as required. (Sintex / Hensel make)
Each 4.00 - 425.00 1,700.00
89 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
i 11.3.1 Above 3.0/4.0 metre and upto 6.5 metre Each 8.00 2,539.00 20,312.00 -
11.3.2 Above 6.50 metre and upto 8.00 metre Each 27.00 3,069.00 82,863.00 -
ii 11.3.4 Above 10.00 metre and upto 12.00 metre Each 28.00 4,270.00 119,560.00 -
90 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
Laying and fixing of one number PVC insulated and PVC sheathed
322 7.7 / XLPE power cable of 1.1 KV grade of following size on wall
surface as required.
i 7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr. 60.00 24.00 1,440.00 -
91 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
327 NSI Supplying, installation, testing and commissioning of non-integral
floodlight luminaries type BJEF 21 S with one no 400 W SV T Plus
lamp and its control gear box. Nos 8.00 - 6,524.00 52,192.00
328 NSI Supplying, installation, testing and commissioning of non-integral
floodlight luminaries type BGEQF with one no 1000 W Halogen
lamp and its control gear box. Nos 28.00 - 2,140.00 59,920.00
329 NSI Supplying, installation, testing and commissioning of LED type
single dome aviation obstruction light Nos 4.00 - 4,012.00 16,048.00
BUS BAR
100A strip Al. bus bars with heat shrinkable colored PVC sleeves 1
Set
OUTGOING
40 Amp 415 V TP MCB having breaking capacity - 10 KA, - 2 Nos.
92 of 187
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
93 of 187
INTERMODAL TERMINAL AT VARANASI (U.P.)
SL. No. DESCRIPTION OF WORK DSR Amount (in Rs.) Non DSR Amount (in Rs.)
1
CONSTRUCTION OF INTERMODAL IWT TERMINAL AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
SUBHEAD - XV - EOT CRANE
i) DSL (Shrouded bus/ Angle Iron Type) For 60 Mtr. For ONE BAY
Gantry girder & gantry rail (Approx 400 Kg/ running meter length),
Rail size 90 Lbs for 61 mtr.x2 ( ONE BAY) & 61 mtr.x2 (SECOND
ii) BAY) Job 1.00 - 22,549,281.00 22,549,281.00
94 of 187
INTERMODAL TERMINAL AT VARANASI (U.P.)
SL. No. DESCRIPTION OF WORK DSR AMOUNT (in Rs) NON DSR AMOUNT (in Rs)
1
CONSTRUCTION OF INTERMODAL TERMINAL (IMT) AT VARANASI IN NW1
B.O.Q. - FINANCIAL BID
DSR- Non-DSR Non-DSR
S.No. Item of Work Unit Total Qty DSR Rate DSR Amount
2014 Rate Amount
SUBHEAD - XVI - BROUGHT OUT CRANES
333 MR FORK LIFT TRUCK (FLT) CRANE
Design, supply, fabrication, erection, testing & commissioning of
dIESEL operated fork lift truck of capacity 3 ton including
transportation to site and as per technical specification attached
complete with following accessories (Similar to VOLTAS MODEL-
DVX 30 FCBC HVM)
i) Load back rest
ii) Set of light
iii) Tool kit Job 1.00 - 1,185,938.00 1,185,938.00
1 of 1