Professional Documents
Culture Documents
www.victaulic.com
The Victaulic website is an information resource
that can help you with your piping projects.
Among the many resources available at the site:
VICTAULIC
2011
Easton, PA 18040 USA Easton, PA 18040 USA Easton, PA 18040 USA
2011
Main
1-800-PICK-VIC 1-610-559-3300 1-610-559-3300
(1-800-742-5842)
1-610-559-3300
1-610-250-8817 (fax)
1-610-250-8817 (fax)
pickvic@victaulic.com
1-610-559-3608 (fax)
vical@victaulic.com Main
effective FEBRUARY 28, 2011
pickvic@victaulic.com
www.victaulic.com
Updated 2/2011
PL2011-MAIN 1616 rev V
Victaulic is a registered trademark of Victaulic Company. © 2011 Victaulic Company. All rights reserved.
Index
SECTION 1 – Couplings and Fittings Series 726
Style 107H Vic-Ball® Valve
QuickVic® Rigid Coupling for Steel Series 722
Style 07 Threaded Ball Valve
Zero-Flex® Rigid Coupling Series 712
Style W07 Swinger® Check Valve
AGS Rigid Coupling Series 713
Style 177 High Pressure Swinger Check Valve
QuickVic Flexible Coupling for Steel Series 716H/716
Style 77 Vic-Check® Valve
Standard Coupling Series 779
Index
Style W77 Venturi Check Valve
AGS Flexible Coupling Series W715
Style 75 AGS Check Valve
Flexible Coupling Series 377
Style 750 Balancing Plug Valve
Reducing Coupling Series 318
Style 741 Sump Ejector Kit
Vic-Flange® Adapter Series 731-D
Style W741 Suction Diffuser
AGS Vic-Flange Adapter Series W731-I
Style 743 AGS Suction Diffuser
Vic-Flange Adapter Series 730
Style 72 Vic-Strainer® Tee Type Strainer
Outlet Coupling Series W730
Styles 791 and 792 AGS Vic-Strainer Tee Type
Vic-Boltless® Coupling Series 732
Style 78 Vic-Strainer Wye Type Strainer
Snap-Joint® Coupling Series W732
Style HP-70 AGS Wye-Type Strainer
Rigid Coupling Style 150
Style HP-70ES Mover® Expansion Joint
High Pressure EndSeal® Coupling SECTION 4 – Hydronic Balancing Products
Style 307 TA Series 786
AWWA to IPS Transition Coupling STAS – Solder End – 300 psi
IPS Size TA Series 787
Grooved End Fittings STAD – NPT (Fem.) End – 300 psi
AGS (Advanced Groove System) Series 78K
Grooved End Fittings STADK Balancing Valve
Extra Heavy “ES” TA Series 788
EndSeal Fittings STAF – Flanged End – 250 psi
Style 47 TA Series 789
Clearflow Dielectric Waterway STAG – Grooved End – 350 psi
Style 47-GG Kits
Steel (IPS) to Copper (CTS) Transition Fitting
Spare Parts
SECTION 2 – Hole Cut Products
TA Series 793
Style 920/920N Differential Pressure Controller
Mechanical-T® Outlet
TA Series 794
Vic®-Tap II Differential Pressure Controller
Hot Tap
Differential Pressure Controller
Style 920/920N Accessories
Mechanical-T Cross
Style 799/79V
Style 923 KOIL-KIT™ Coil-Pack
Vic-Let™ Strapless Outlet
TA Series 736
Style 924 TA Link Differential Pressure Sensor
Vic-O-Well™ Thermometer Outlet
Universal Gauge Meter
SECTION 3 – Valves and Specialties Conversion Kit
Vic-300 MasterSeal TA Series 73M
Butterfly Valve TA CMI
Vic-300 (300 psi) TA Series 734
AGS Butterfly Valve Scope Balancing Instrument
Series 706 (300 psi)
Large Diameter High Pressure Butterfly Valve
Series 700
Butterfly Valve
Series 721
Grooved End Ball Valve
www.victaulic.com PL2011-Main 1
Index
SECTION 5 – Plain End Products SECTION 12 – Large Diameter Products
Style 99 Style W07
Roust-A-Bout® Coupling AGS Rigid Coupling for AGS Vic-Ring System
Adapter Nipples Style W77
AGS Flexible Coupling for AGS Vic-Ring System
Plain End Fittings
SECTION 6 – Pressfit® System Products
Style 41
Coupling for Vic-Ring System
Pressfit System - Plain End System for
Schedule 5, Type 304 Stainless Steel Piping Style 31
Coupling for Vic-Ring System
Pressfit System - Plain End System for
Schedule 5, Type 316 Stainless Steel Piping Style 44
Coupling for Vic-Ring System
Index
2 www.victaulic.com PL2011-Main
Index
VPG824
Cut Grooving Tool for Plastic Pipe
VHCT 900
Hole Cutting Tool
HCT908
Hole Cutting Tool
Vic-Tap II
Hot Tap
PFT505
Pressfit Tool
PFT509
Index
Pressfit Tool
VCT1
Cut Off Tool - Manual
VCT2
Cut Off Tool - Automatic
NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.
www.victaulic.com PL2011-Main 3
4 www.victaulic.com PL2011-Main
Table of Contents
No(s). W42, W43 and W49 AGS Adapter Nipples . . . . . . . . . . 37
Table of contents
GENERAL
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 No. 80 Female Threaded Adapter. . . . . . . . . . . . . . . . . . . . . . 38
Gasket Selection Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . . . 38
No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 39
SECTION 1 – Couplings & Fittings No. W25 AGS Grooved Reducing Tee. . . . . . . . . . . . . . . . . . . 41
Style 107H QuickVic® Rigid Coupling for Steel. . . . . . . . . . . . . 12 No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . . 42
TABLE OF CONTENTS
Style 07 Zero-Flex® Rigid Coupling . . . . . . . . . . . . . . . . . . . . . 12 No. 50 Concentrc Reducers. . . . . . . . . . . . . . . . . . . . . . . . . . 43
AGS Style W07 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . 13 No. 51 Eccentric Reducers. . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Style 177 QuickVic Flexible Coupling for Steel. . . . . . . . . . . . . 14 No. W50 AGS Concentric Reducers . . . . . . . . . . . . . . . . . . . . 45
Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . . 15 No. W51 AGS Eccentric Reducers. . . . . . . . . . . . . . . . . . . . . . 45
AGS Style W77 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . 17 No.(s) 53, 54 and 55 Swaged Nipples. . . . . . . . . . . . . . . . . . . 45
Style 75 Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 No. 52 – Reducer Threaded Small End. . . . . . . . . . . . . . . . . . 46
Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . 19 No. 30 Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Style 741 Vic-Flange® Adapter. . . . . . . . . . . . . . . . . . . . . . . . . 20 No. W30 AGS Lateral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Style W741 AGS Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . . 20 No. 60 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Style 743 Vic-Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . 21 No. W60 AGS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Style 72 Outlet Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 No. 30R Reducing Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Style 791 and 792 Vic-Boltless® Coupling. . . . . . . . . . . . . . . . 23 No. W30R AGS Reducing Lateral . . . . . . . . . . . . . . . . . . . . . . 50
Style 791 Locking Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 No. 32 Tee Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Style 78 Snap-Joint® Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 23 No. 32R Reducing Tee Wye . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Style HP-70 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . 24 No. 61 Bull Plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Style HP-70ES Coupling with “ES” Gasket. . . . . . . . . . . . . . . . 24 No. 48 Hose Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Style 307 Transition Coupling . . . . . . . . . . . . . . . . . . . . . . . . . 25 No(s). 41, 45 and 46 Flanged Adapter Nipples. . . . . . . . . . . . 52
Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 No. W45 AGS Flanged Adapter Nipple . . . . . . . . . . . . . . . . . . 53
Gaskets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3D Cast Elbows for Abrasive Services. . . . . . . . . . . . . . . . . . . 53
Flange Parts – Styles 741, W741, 743 and 441. . . . . . . . . . . . 28 Long Radius Elbows – 3D. . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Flange Gaskets – Styles 741, W741, 743 and 441. . . . . . . . . . 29 Long Radius Elbows – 5D. . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Style 72 Outlet Coupling Gaskets. . . . . . . . . . . . . . . . . . . . . . . 30 Long Radius Elbows – 6D. . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Metal Liners – Styles 77, 75 and 78 Couplings . . . . . . . . . . . . 30 Extra Heavy “ES” Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 31 Style 47 Clearflow Dielectric Waterway . . . . . . . . . . . . . . . . . . 58
Go-No-Go Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Style 47-GG IPS to CTS Transition Fitting. . . . . . . . . . . . . . . . . 58
Elbows –
No. 10 – 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 SECTION 2 – Hole Cut Products
No. 11 – 45°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Styles 920/920N Female Threaded Mechanical-T® Outlet. . . . 60
No. W10 – AGS 90°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Styles 920/920N Grooved Mechanical-T Outlet. . . . . . . . . . . . 61
No. W11 – AGS 45°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Vic-Tap II Hot Tap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
No. 12 – 22Z\x°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Styles 920/920N Mechanical-T Cross. . . . . . . . . . . . . . . . . . . 63
No. 13 – 11Z\v°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Style 923 Vic-Let™ Strapless Outlet . . . . . . . . . . . . . . . . . . . . 66
No. W12 – AGS 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Style 924 Vic-O-Well™ One Nut Thermometer Well. . . . . . . . . 66
No. W13 – AGS 11Z\v°. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
No. 100 and No. 110 1Z\x D Long Radius Elbows . . . . . . . . 34 SECTION 3 – Valves and Specialties
No. W100 and W110 1Z\x D AGS Long Radius Elbow. . . . . . 34 Vic-300 MasterSeal® Butterfly Valve. . . . . . . . . . . . . . . . . . . . 68
No. R-10G and No. R-10F Reducing Base Support Elbow. . . . 34 Vic-300 (14 – 24”) 300 psi AGS Butterfly Valve . . . . . . . . . . . 70
No. 10-DR Drain Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Series 706 (14 – 24”) 300 psi Butterfly Valve. . . . . . . . . . . . . 71
No. 20 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Series 700 Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
No. 29M Tee with Threaded Branch. . . . . . . . . . . . . . . . . . . . 35 Series 721 Grooved End Ball Valve. . . . . . . . . . . . . . . . . . . . . 72
No. W20 AGS Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Series 726 Grooved End Ball Valves . . . . . . . . . . . . . . . . . . . . 73
No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Series 722 Threaded Brass Ball Valve. . . . . . . . . . . . . . . . . . . 74
No. 33 True Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Series 712 Swinger® Check Valve . . . . . . . . . . . . . . . . . . . . . . 74
No. W35 AGS Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Series 713 High Pressure Swinger Check Valve. . . . . . . . . . . . 74
No. W33 AGS True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Series 716H/716 Vic-Check® Valve. . . . . . . . . . . . . . . . . . . . . 75
No(s). 40, 42, and 43 Adapter Nipples. . . . . . . . . . . . . . . . . . 37 Series 779 Venturi Check Valve. . . . . . . . . . . . . . . . . . . . . . . . 76
www.victaulic.com PL2011-Main 5
Table of Contents
Series W715 AGS Vic-Check Valve . . . . . . . . . . . . . . . . . . . . . 76 SECTION 6 - Pressfit® System Products
Series 377 Vic-Plug Balancing Valve. . . . . . . . . . . . . . . . . . . . 77 Vic-Press™ 304
Series 318 Sump Ejector Kit. . . . . . . . . . . . . . . . . . . . . . . . . . 77 Gasket Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Series 731-D Suction Diffuser. . . . . . . . . . . . . . . . . . . . . . . . . 78 Style 500 Loose O-Rings. . . . . . . . . . . . . . . . . . . . . . . . . 103
Series W731-D AGS Suction Diffuser. . . . . . . . . . . . . . . . . . . . 78 Style 597 Standard Coupling. . . . . . . . . . . . . . . . . . . . . . 103
Style 730 Vic-Strainer Tee Type Strainer. . . . . . . . . . . . . . . . . 79 Style 596 Male Adapter – Threaded. . . . . . . . . . . . . . . . . 103
TABLE OF CONTENTS
Series W730 AGS Vic-Strainer Tee Type Strainer. . . . . . . . . . . 79 Style 599 Female Adapter – Threaded. . . . . . . . . . . . . . . 104
Series 732 Vic-Strainer Wye Type Strainer. . . . . . . . . . . . . . . . 80 Style 590 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Series W732 AGS Vic-Strainer Wye Type Strainer . . . . . . . . . . 80 Style 586 90° Elbow – Short Tangent. . . . . . . . . . . . . . . . 104
Style 150 Mover Expansion Joint. . . . . . . . . . . . . . . . . . . . . . . 80 Style 591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Style 592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
SECTION 4 – Hydronic Balancing Products Style 593 Tee – Reducing Branch. . . . . . . . . . . . . . . . . . 105
Circuit Balancing Valves Style 588 Tee – Reducing Branch – Threaded. . . . . . . . . 106
TA Series 786 STAS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Style 594 Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 106
TA Series 787 STAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Style 595 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . . 106
Series 78K STADK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Style 565 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . 107
TA Series 788 STAF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Style 587 Transition Nipple . . . . . . . . . . . . . . . . . . . . . . . 107
TA Series 789 STAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Series 589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 107
TA Series 786 and 787 Insulation Kits. . . . . . . . . . . . . . . . 83 Style 584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . . 108
TA Series 788 and 789 Insulation Kits. . . . . . . . . . . . . . . . 84 Style 582 Reducer Insert. . . . . . . . . . . . . . . . . . . . . . . . . 108
TA Series 786 Drain Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Style 561 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Spare Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Vic-Press 304 Pipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Series 799/79V KOIL-KIT™ Coil-Pack. . . . . . . . . . . . . . . . . . . 85 Pressfit Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Differential Pressure Controllers Vic-Press™ 316
TA Series 793 Differential Pressure Controller . . . . . . . . . . 91 Gasket Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
TA Series 794 Differential Pressure Controller . . . . . . . . . . 91 Style 500 Loose O-Rings. . . . . . . . . . . . . . . . . . . . . . . . . 111
TA Series 793 Insulation Kits. . . . . . . . . . . . . . . . . . . . . . . 91 Style 507 Standard Coupling. . . . . . . . . . . . . . . . . . . . . . 111
TA Differential Pressure Controller Accessories . . . . . . . . . 92 Style 508 Slip Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 111
Balancing Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Style 576 Male Adapter – Threaded. . . . . . . . . . . . . . . . . 112
TA Series 736 TA Link Differential Pressure Sensor. . . . . . 93 Series 569 Stainless Steel Ball Valve . . . . . . . . . . . . . . . . 112
Universal Gauge Meter Conversion Kit. . . . . . . . . . . . . . . . 93 Series 569 Repair Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Series 73M TA CMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Style 570 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
TA Series 734 Scope Balancing Instrument. . . . . . . . . . . . 94 Style 568 90° Elbow – Short Tangent. . . . . . . . . . . . . . . . 113
Style 571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
SECTION 5 – Plain End Couplings and Fittings Style 572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Style 99 Roust-A-Bout® Coupling . . . . . . . . . . . . . . . . . . . . . . 96 Style 573 Tee – Reducing Branch. . . . . . . . . . . . . . . . . . 114
Gaskets for Style 99 Couplings . . . . . . . . . . . . . . . . . . . . . . . . 96 Style 574 Concentric Reducer. . . . . . . . . . . . . . . . . . . . . 114
Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 97 Style 575 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . . 115
No(s). 40-P, 42-P and 43-P Adapter Nipples. . . . . . . . . . . . . . 97 Style 577 Adapter Nipple. . . . . . . . . . . . . . . . . . . . . . . . . 115
Plain End Fittings Style 578 Tee – Reducing Branch Threaded . . . . . . . . . . 115
No. 10-P – 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Style 585 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . . 116
No. 11-P – 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Style 566 Flange Adapter. . . . . . . . . . . . . . . . . . . . . . . . 116
No. 20-P – Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Style 579 Female Adapter – Threaded. . . . . . . . . . . . . . . 116
No. 61-P – Bull Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Style 583 Reducer Insert. . . . . . . . . . . . . . . . . . . . . . . . . 117
No. 33-P – Wye. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Vic-Press 316 Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
No. 30-P – Lateral. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Pressfit Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
No. 35-P – Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
No. 53-P – Swaged Nipples. . . . . . . . . . . . . . . . . . . . . . . 100 SECTION 7 – HDPE Products
No. 25-P – Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 100 Style 995 HDPE Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Table of contents
Style 994 Flange Adapter for HDPE Pipe. . . . . . . . . . . . . . . . 121
Style 997 HDPE-to-Steel Transition Coupling. . . . . . . . . . . . . 121
6 www.victaulic.com PL2011-Main
Table of Contents
SECTION 8 – Copper Connection Products PL7120 Supply Stop Valve (Straight) –
Style 607 QuickVic Rigid Coupling for Copper. . . . . . . . . . . . 124 Quarter Turn Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Style 622 Copper Mechanical-T Bolted Branch Outlet. . . . . . 124 PL7125 Supply Stop Valve (Angled) –
Quarter Turn Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Style 622 Copper Mechanical-T Cross. . . . . . . . . . . . . . . . . . 125
PL-PREP-S Power Drive Small Chamfer & Deburr Tool. . . . . . 142
Style 641 Copper Vic-Flange Adapter . . . . . . . . . . . . . . . . . . 125
PL-PREP-L Power Drive Large Chamfer & Deburr Tool. . . . . . 142
No. 610 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
TABLE OF CONTENTS
PL-PREPMAX-S Drill Compatible
No. 611 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Small Chamfer & Deburr Tool. . . . . . . . . . . . . . . . . . . . . 143
No. 620 Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 PL-PREPMAX-L Drill Compatible
No. 660 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Large Chamfer & Deburr Tool . . . . . . . . . . . . . . . . . . . . 143
Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
No. 650 Concentric Reducer Groove x Groove. . . . . . . . . 126 SECTION 10 - Aluminum Products
No. 652 Concentric Reducer Grooved x Cup. . . . . . . . . . 127 Aluminum Couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
No. 653 Concentric Reducer Grooved x Plain End. . . . . . 127 Aluminum Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
No. 625 Reducing Tee Grooved x Groove. . . . . . . . . . . . . 127
No. 626 Reducing Tee Grooved x Cup. . . . . . . . . . . . . . . 128 SECTION 11 - Stainless Steel Products
No. 627 Reducing Tee Grooved x Plain End. . . . . . . . . . . 128 Ductile Iron Couplings for Stainless Steel Pipe
Series 608 Copper Connection Butterfly Valve . . . . . . . . . . . 129 Style 89 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . . 148
Series 608 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Style W89 AGS Rigid Coupling. . . . . . . . . . . . . . . . . . . . . 148
Stainless Steel Couplings
SECTION 9 - PermaLynx System Products Style 489 Rigid Coupling. . . . . . . . . . . . . . . . . . . . . . . . . 149
PL600 Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Style 475 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . 149
PL600R Coupling (R). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Style 77-S Flexible Coupling. . . . . . . . . . . . . . . . . . . . . . . 150
No. 653 Grooved x PL Concentric Reducer. . . . . . . . . . . . . . 132 Stainless Steel Flange Adapters
PL600-2R Fitting Coupling (R) . . . . . . . . . . . . . . . . . . . . . . . 132 Style 441 Vic-Flange Adapter. . . . . . . . . . . . . . . . . . . . . . 150
PL606 45° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 No. 45S Stainless Steel Flange Adapter. . . . . . . . . . . . . . 150
PL606-2 45° Fitting Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Stainless Steel Fittings
PL607 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 No. 410-SS Long Radius 90° Elbow. . . . . . . . . . . . . . . . . 151
PL607LT 90° Elbow – Long Radius. . . . . . . . . . . . . . . . . . . . 134 No. 411-SS Long Radius 45° Elbow. . . . . . . . . . . . . . . . . 151
PL607R 90° Elbow – Short Radius (R) . . . . . . . . . . . . . . . . . 134 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
PL607-2 90° Fitting Elbow – Short Radius. . . . . . . . . . . . . . . 134 Concentric Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
PL611 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Eccentric Reducer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
PL611BH Bullhead Tee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
PL611R Tee (R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 No. 60-SS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
No. 627 Grooved x PL Reducing Tee. . . . . . . . . . . . . . . . . . . 136 Stainless Steel Valves
PL611RR Tee (RR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Series 763 Butterfly Valve. . . . . . . . . . . . . . . . . . . . . . . . 155
PL617 Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 Series 726-S Ball Valve. . . . . . . . . . . . . . . . . . . . . . . . . . 156
PL707-5 90° Drop Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Series 712-S Check Valve . . . . . . . . . . . . . . . . . . . . . . . . 156
PL707-5S 90° Drop Elbow Stubout. . . . . . . . . . . . . . . . . . . . 137
PL733 Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 SECTION 12 - Large Diameter Piping
PL603 Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Large Diameter Piping Solutions. . . . . . . . . . . . . . . . . . . . . . 158
PL603R Coupling (R). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 Vic-Ring Check Sheet for W07/W77/W89 AGS Couplings . . . 159
PL604 Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 AGS Style W07 Rigid Coupling for AGS Vic-Ring System. . . . 160
PL604R Coupling (R). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 AGS Style W77 Flexible Coupling for AGS Vic-Ring System. . 161
PL707-3 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Style 31 Coupling with
PL707-3-5 90° Drop Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . 139 Type “D” & “E” Vic-Ring Adapters. . . . . . . . . . . . . . . . . 162
PL707-4 90° Elbow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Style 41 Coupling with
PL712 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Type “D” & “E” Vic-Ring Adapters. . . . . . . . . . . . . . . . . 162
PL733-3 Union. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Style 44 Coupling with
Type “D” & “E” Vic-Ring Adapters. . . . . . . . . . . . . . . . . 162
PL733-4 Union. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Style 41/44 Couplings with
PL771 Flange. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 Type “C” Vic-Ring Adapters. . . . . . . . . . . . . . . . . . . . . . 162
PL300-SL Ball Valve – Standard Lever Handle . . . . . . . . . . . 141
PL510 Check Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
www.victaulic.com PL2011-Main 7
Table of Contents
SECTION 13 – Vic-Easy® Roll Grooving Tools Pipe Cut-Off Tools
Vic-Easy Roll Grooving Tools – Field Portable VCT1 – Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
VE12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 VCT2 – Automatic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
VE26 S/C/SS/P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
VE26/VE46 Power Drive Kit. . . . . . . . . . . . . . . . . . . . . . . 164 How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
VE46/P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Terms and Conditions of Tool Rental. . . . . . . . . . . . . . . . . . . 194
TABLE OF CONTENTS
8 www.victaulic.com PL2011-Main
Gaskets
E
perature range plus a variety of dilute acids, oil-free air and many
Green chemical services. UL classified in accordance with ANSI/NSF
–30°F to +230°F EPDM Stripe 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water
service.
NOT RECOMMENDED FOR PETROLEUM SERVICES.
EHP
Recommended for hot water service within the specified tem-
Red perature range. UL classified in accordance with ANSI/NSF 61 for
–30°F to +250°F EPDM Stripe cold +86°F/+30°C and hot +180°F/+82°C potable water service.
NOT RECOMMENDED FOR PETROLEUM SERVICES.
Recommended for petroleum products, hydrocarbons, air
T Orange with oil vapors, vegetable and mineral oils within the speci-
–20°F to +180°F Nitrile Stripe fied temperature range; not recommended for hot dry air over
+140°F/+60°C and water over +150°F/+66°C.
NOT RECOMMENDED FOR HOT WATER SERVICES.
M2
Specially compounded to provide superior service for common aro-
IPS Epichloro- White
–40°F to +160°F matic fuels at low temperatures. Also suitable for certain ambient tem-
hydrin Stripe perature water services.
O
Recommended for many oxidizing acids, petroleum oils, halogenated
Fluoro- Blue hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with
+20°F to +300°F elastomer Stripe hydrocarbons to +300°F/+149°C.
NOT RECOMMENDED FOR HOT WATER SERVICES.
A
ments. Conforms to CFR Title 21 Part 177.2600. Not recommended
White White
+20°F to +180°F for hot water services over +150°F/+66°C or for hot, dry air over
Nitrile Gasket +140°F/+60°C.
NOT RECOMMENDED FOR HOT WATER SERVICES.
Specially compounded with excellent oil resistance and a high
modulus for resistance to extrusion. Temperature Range –20°F/–29°C
T
No to +150°F/+66°C. Recommended for petroleum products, air with
External oil vapors, vegetable and mineral oils within the specified tem-
–20°F to +150°F Nitrile Identifi- perature range. Not recommended for hot water services over
EndSeal cation +150°F/+66°C or for hot, dry air over +140°F/+60°C. For maximum
gasket life under pressure extremes, temperature should be limited to
+120°F/+49°C.
S
AWWA and Transition Orange Recommended for petroleum products, air with oil vapors, vegetable
–20°F to +180°F Nitrile Stripe and
Coupling mineral oils within the specified temperature range; not recom-
mended for hot dry air over +140°F and water over +150°F.
NOT RECOMMENDED FOR HOT WATER SERVICES.
Recommended for water service within the specified temperature range
M
Haloge- plus a variety of dilute acids, oil-free air and many chemical services.
Brown
–20°F to +200°F nated Readily conforms to ductile pipe surfaces. UL classified in accordance
Stripe
Butyl with ANSI/NSF 61 for cold +86°F/+30°C potable water service.
NOT RECOMMENDED FOR PETROLEUM SERVICES.
www.victaulic.com PL2011-Main 9
10 www.victaulic.com PL2011-Main
SECTION 1 – Couplings & Fittings
Couplings and
Fittings
www.victaulic.com PL2011-Main 11
Grooved IPS Pipe Couplings
Style 107H QuickVic ® Rigid Coupling for Steel
COUPLING COMPLETE †
Coupling for Steel PIPE Aprx. Wgt. Ea. With Grade “EHP” or “T” Gasket SPARE PARTS
Inches Price Each
(with Style 77 gasket) 1 1.315 1.6 $46.00 $58.00 $65.00 $78.00 2 C\, x 2
Request publication 06.02. 1Z\v 1.660 1.7 46.00 58.00 65.00 78.00 2 C\, x 2
1Z\x 1.900 1.9 46.00 58.00 65.00 78.00 2 C\, x 2
2 51.00 67.50
section 1
12 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
Zero-Flex Style 07 – Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket
Rigid Coupling AGS Style W07 – Grade “E” or “T” FlushSeal Gasket
section 1
AGS Style W07 Inches Price Each Plated Bolt & Nut
Request publication 20.02. Nom. Outside Size §
Size Dia. Lbs. Painted Galv. No. * Inches
14 14.000 48.9 $526.50 $675.50 2 1 x 5Z\x
16 16.000 60.8 685.50 875.00 2 1 x 5Z\x
18 18.000 71.2 792.50 1026.50 2 1 x 5Z\x
20 20.000 81.7 1083.00 1357.00 2 1Z\, x 5Z\x
24 24.000 116.2 1388.00 1758.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1C\, x 6
28 28.000 220.0 + + 4 1C\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
32 32.000 242.0 + + 4 1Z\v x 7
14 – 24”
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
www.victaulic.com PL2011-Main 13
Grooved IPS Pipe Couplings
Rigid Coupling AGS Style W07 – Silicone Grade “L” FlushSeal Gasket
COUPLING COMPLETE †
Aprx. With FlushSeal Silicone Grade “L”
AGS Style W07 PIPE Wgt. Ea. Gasket SPARE PARTS
Request publication 20.02. Inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. Lbs Painted Galv. No. Inches
14 14.000 48.9 $1321.00 $1470.00 2 1 x 5Z\x
16 16.000 60.8 1453.50 1642.50 2 1 x 5Z\x
18 18.000 71.2 1598.50 1832.50 2 1 x 5Z\x
20 20.000 81.7 1852.50 2126.50 2 1Z\, x 5Z\x
24 24.000 116.2 2018.50 2388.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1C\, x 6
28 28.000 220.0 + + 4 1C\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
14 – 24” 32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
14 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
Style 77 Standard Flexible Coupling
section 1
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
** Requires Vic-Ring for assembly.
* Number of bolts equals number of segments supplied.
NOTE: See Spare Parts Section for spare part prices.
‡ For cut groove original groove systems only. For 14-60" roll groove systems Victaulic offers the Style W77 coupling.
See page 17 for pricing information.
www.victaulic.com PL2011-Main 15
Grooved IPS Pipe Couplings
Standard Coupling Style 77 – Silicone Grade “L” Gasket or Fluoroelastomer Grade “O” Gasket
NOTE: 14 – 60” standard for this size range is the W77 AGS flexible coupling.
For 14 – 24" cut groove systems using the original groove system, see Style 77 coupling on page 15.
section 1
16 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
AGS Style W77 Flexible Coupling
Flexible Coupling AGS Style W77 – Grade “E” or “T” FlushSeal Gasket
COUPLING COMPLETE †
Aprx. With FlushSeal®
AGS Style W77 PIPE Wgt. Ea. “E” or “T” Gasket SPARE PARTS
Request publication 20.03. Inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. Lbs Painted Galv. No. * Inches
14 14.000 47.5 $542.50 $749.50 2 1 x 5Z\x
16 16.000 57.8 711.50 965.50 2 1 x 5Z\x
18 18.000 65.0 833.00 1155.00 2 1 x 5Z\x
20 20.000 82.3 1112.00 1492.00 2 1Z\, x 5Z\x
24 24.000 106.8 1435.50 1927.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1Z\, x 6
28 28.000 220.0 + + 4 1Z\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
14 – 24” 32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
54 54.000 648.0 + + 4 1Z\x x 7
56 56.000 676.0 + + 4 1Z\x x 7
60 60.000 720.0 + + 4 1Z\x x 7
26 – 60”
§ Metric thread size bolts available. Contact Victaulic.
section 1
NOTE: See Spare Parts Section for spare part prices.
NOTE: 14 – 60” standard for this size range is the W77 AGS flexible coupling.
For 14 – 24" cut groove systems using the original groove system, see Style 77 coupling on page 15.
www.victaulic.com PL2011-Main 17
Grooved IPS Pipe Couplings
Flexible Coupling AGS Style W77 – Silicone Grade “L” FlushSeal Gasket
COUPLING COMPLETE †
Aprx. With FlushSeal Silicone Grade “L”
AGS Style W77 PIPE Wgt. Ea. Gasket SPARE PARTS
Request publication 20.03. Inches Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. Lbs Painted Galv. No. Inches
14 14.000 47.5 $1337.00 $1543.50 2 1 x 5Z\x
16 16.000 57.8 1479.00 1732.50 2 1 x 5Z\x
18 18.000 65.0 1638.50 1904.50 2 1 x 5Z\x
20 20.000 82.3 1882.00 2262.50 2 1Z\, x 5Z\x
24 24.000 106.8 2104.00 2557.50 2 1Z\, x 5Z\x
26 26.000 205.0 + + 4 1Z\, x 6
28 28.000 220.0 + + 4 1Z\, x 6
30 30.000 227.0 + + 4 1Z\v x 7
14 – 24” 32 32.000 242.0 + + 4 1Z\v x 7
34 34.000 255.0 + + 4 1Z\v x 7
36 36.000 268.0 + + 4 1Z\v x 7
40 40.000 340.0 + + 4 1Z\x x 7
42 42.000 360.0 + + 4 1Z\x x 7
44 44.000 390.0 + + 4 1Z\x x 7
46 46.000 415.0 + + 4 1Z\x x 7
48 48.000 425.0 + + 4 1Z\x x 7
54 54.000 648.0 + + 4 1Z\x x 7
56 56.000 676.0 + + 4 1Z\x x 7
60 60.000 720.0 + + 4 1Z\x x 7
26 – 60”
§ Metric thread size bolts available. Contact Victaulic.
grooved ips pipe couplings
COUPLING COMPLETE †
Aprx. COUPLING COMPLETE † With FlushSeal®
Style 75 PIPE Wgt. Ea. With Grade “E” or “T” Gasket “E” or “T” Gasket SPARE PARTS
Request publication 06.05. Inches Price Each Price Each Plated Bolt & Nut
Nom. Outside Size §
Size Dia. Lbs Painted Galv. Painted Galv. Inches
1 1.315 1.3 $34.00 $42.50 $54.50 $64.00 C\, x 2
1Z\v 1.660 1.4 35.00 45.00 57.00 68.00 C\, x 2
1Z\x 1.900 1.5 42.50 52.50 62.50 74.50 C\, x 2
2 2.375 1.8 51.50 68.50 64.00 76.50 C\, x 2
2Z\x 2.875 1.9 60.00 84.50 76.50 90.00 C\, x 2
3 3.500 2.9 67.00 93.00 81.00 97.50 Z\x x 2C\v
4 4.500 4.1 96.50 136.50 115.50 141.50 Z\x x 2C\v
5 5.563 5.8 146.50 211.00 197.50 235.50 B\, x 3Z\v
6 6.625 7.0 173.50 249.50 218.00 264.50 B\, x 3Z\v
8 8.625 12.9 282.50 420.50 363.00 435.50 C\v x 4Z\v
18 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
section 1
2 x 1 2.0 $87.50 $104.50 C\, x 2
1Z\x 2.0 70.50 85.00 C\, x 2
2Z\x x 2 2.9 91.00 114.00 C\, x 2
3 x 2 4.6 104.00 131.50 Z\x x 2C\v
2Z\x 4.1 89.50 114.00 Z\x x 2C\v
4 x 2 8.8 164.50 207.50 B\, x 3Z\v
2Z\x 8.3 147.50 194.00 B\, x 3Z\v
3 6.4 138.00 178.50 B\, x 3Z\v
5 x 4 10.8 185.50 244.00 C\v x 4Z\v
6 x 4 16.1 280.00 353.00 C\v x 4Z\v
5 12.6 245.00 318.00 C\v x 4Z\v
8 x 6 22.3 419.00 530.50 M\, x 5
10 x 8 32.0 537.50 681.00 1 x 6
www.victaulic.com PL2011-Main 19
Grooved IPS Pipe Couplings
Style 741 Vic-Flange ® Adapter
COUPLING
Adapters Aprx. COUPLING COMPLETE †
COMPLETE †
With Grade “L”
grooved ips pipe couplings
20 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
Style 743 Vic-Flange Adapter
Vic-Flange Adapter Victaulic flange adapters require a smooth, hard surface at the mating flange face
Notes for effective sealing. Some applications, for which the Victaulic flange adapter is oth-
erwise well suited, do not provide an adequate mating surface. In such cases, it is
recommended that a metal flange washer be inserted between the Victaulic flange
section 1
1. When mating to a serrated flange: a flange gasket should be used adjacent to
the serrated flange. The flange washer is then inserted between the Victaulic flange
adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially
rubber faced (smooth or not), the flange washer is placed between the valve and the
Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the
Victaulic flange adapters and the rubber faced flange.
4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two
Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged
valve), then a flanged gasket must be placed adjacent to that flange and the flange
washer must be inserted between the flange gasket and the Victaulic flange adapter.
5. When mating to components (valves, strainers, etc.) where the component flange
face has an insert: follow the same arrangement as in # 1 above.
www.victaulic.com PL2011-Main 21
Grooved IPS Pipe Couplings
Style 72 Outlet Coupling
Outlet Coupling Style 72 – Grade “E” or “T” Gasket - For Style 72 gaskets see below.
Nominal Size OUTLET COUPLING COMPLETE † with Grade “E” or “T” Gasket SPARE PARTS
Female Thd. Branch
Style 72
Price Each Plated Bolt & Nut
Request publication 06.10. Aprx
Inches Wgt. Ea. Size §
Run x Branch Lbs Painted Galv. Inches
1Z\x x Z\x 1.4 $91.00 $107.50 C\, x 2
C\v 2.8 91.00 107.50 C\, x 2
1 2.8 91.00 107.50 C\, x 2
2 x Z\x 3.5 93.00 114.50 C\, x 2
C\v 2.5 93.00 114.50 C\, x 2
1 3.2 93.00 114.50 C\, x 2
2Z\x x Z\x 4.5 143.00 176.50 Z\x x 2C\v
C\v 4.6 143.00 176.50 Z\x x 2C\v
1 6.0 143.00 176.50 Z\x x 2C\v
1Z\v 5.0 161.50 204.50 B\, x 3Z\v
1Z\x 5.0 182.50 228.50 B\, x 3Z\v
3 x C\v 4.5 138.00 168.00 Z\x x 2C\v
1 8.9 182.50 228.50 B\, x 3Z\v
1Z\v 8.5 209.50 288.50 B\, x 3Z\v
1Z\x 8.5 209.50 288.50 B\, x 3Z\v
4 x C\v 6.3 202.50 251.50 Z\x x 2C\v
1 6.5 202.50 251.50 Z\x x 2C\v
1Z\x 11.6 287.50 366.50 B\, x 3Z\v
2 14.6 287.50 366.50 B\, x 3Z\v
6 x 1 19.3 406.50 528.00 C\v x 4Z\v
grooved ips pipe couplings
22 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
Style 791 and 792 Vic-Boltless® Coupling
Styles 791 Coupling and 792 Nom. Size Outside Dia. Lbs Painted Galv.
SPARE PARTS
section 1
2Z\x C\, x 2
couplings. Use of other objects 3 C\, x 2 4.00
are strictly prohibited.
4 M\zn x 2Z\, 4.50
6 Z\x x 2C\zn 5.00
8 Z\x x 2M\zn 5.50
COUPLING COMPLETE
Aprx. COUPLING COMPLETE † With FlushSeal®
Style 78 PIPE Wgt. Ea. With Grade “E” or “T” Gasket Gasket †
Inches Price Each Price Each
(with Style 77 gasket) Nom. Size Outside Dia. Lbs Painted Galv. Painted Galv.
Request publication 06.09. 1 (a) 1.315 0.8 $80.50 $93.50 $85.50 $100.50
1Z\v (a) 1.660 1.1 94.50 114.00 103.50 124.00
1Z\x (a) 1.900 1.7 91.00 108.50 95.00 113.00
2 (c) 2.375 1.7 87.00 95.00 91.50 108.50
2Z\x (c) 2.875 2.5 95.50 114.50 118.00 141.50
3 (c) 3.500 2.8 111.50 137.50 134.00 163.00
4 (c) 4.500 5.5 143.00 184.50 176.50 220.00
5 (c) 5.563 9.8 292.00 357.50 360.00 440.00
6 (c) 6.625 10.7 306.50 386.50 383.00 466.50
8 (c) 8.625 15.3 469.50 588.00 531.50 655.50
www.victaulic.com PL2011-Main 23
Grooved IPS Pipe Couplings
Style HP-70 Rigid Coupling
Size §
Nom. Size Outside Dia. Lbs Painted Galv. Price Each Inches
With “ES” Gasket
2 2.375 3.2 $84.00 $106.50 $47.50 B\, x 2C\v
Request publication 06.13.
2Z\x 2.875 4.0 97.50 126.50 59.50 B\, x 3Z\x
section 1
24 www.victaulic.com PL2011-Main
Grooved IPS Pipe Couplings
Style 307 Transition Coupling
COUPLING COMPLETE †
(AWWA to IPS) PIPE
Inches
Aprx.
Wgt. Ea.
With Grade “M” or “S”
FlushSeal Gasket SPARE PARTS
Mating Pipe O.D. Price Each Grade
Style 307 “M” or “S”
FlushSeal
Request publication 23.03. Nom. AWWA Gasket Only
Size IPS Steel Ductile Lbs Painted Galv. Price Ea. Bolt & Nut
3 3.500 3.960 6.0 $185.50 $248.50 $78.50 Z\x x 2C\v
4 4.500 4.800 8.0 212.00 292.00 81.50 Z\x x 3Z\v
6 6.625 6.900 9.0 258.00 351.00 87.50 B\, x 3Z\v
8 8.625 9.050 18.0 321.50 478.50 97.50 C\v x 5
10 10.750 11.100 22.0 413.00 607.50 171.00 M\, x 6Z\x
12 12.750 13.200 31.1 549.00 818.50 177.00 M\, x 6Z\x
www.victaulic.com PL2011-Main 25
Spare Parts
Lubricant
Lubricant LUBRICANT
4Z\x oz. Tube or 1 Quart Containers Price Each
PACK $256.50
With 12 Tubes – 4Z\x oz. Each
CONTAINER 111.00
One Quart – Container
NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.
Gaskets
Gaskets Gaskets for Styles 07, HP-70, 75, 77, 78, 791, 997, 775, 475, 489 and 89 Couplings
26 www.victaulic.com PL2011-Main
Spare Parts
For Style W07/W77 AGS Gaskets
Silicone Gaskets
for Styles 07, HP-70, 75, 77, 78, 791, 997, 77S, 475, 489 and 89 Couplings
spare parts
section 1
Nom. Size Grade “L” FlushSeal
Inches Silicone Grade “L” Silicone
C\v $87.00 +
1 87.00 $103.00
1Z\v 125.50 287.75
1Z\x 131.00 195.00
2 80.50 120.50
2Z\x 93.50 140.00
3 101.00 151.00
3Z\x + –
4 147.00 218.50
4Z\x + +
5 289.50 432.50
6 317.00 474.00
8 354.00 529.00
10 460.50 690.50
12 543.50 814.00
13Z\x + –
14 812.00 1217.00
16 + +
18 + +
20 + +
24 + +
www.victaulic.com PL2011-Main 27
Spare Parts
Style 750 Gaskets Standard “E” or “T” Gaskets for Style 750
Nom. Size
Inches Price Each
NOTE: Run x Brch. “E” or “T”
For pricing couplings complete with any
special gaskets, contact Victaulic . 2 x 1 $25.50
1Z\x 25.50
Gasket recommendations can be found in
the latest Victaulic Gasket Selection Guide 2Z\x x 2 33.50
(publication 05.01). This information is 3 x 2 38.00
general in scope and Victaulic should be
consulted for recommendations when a 2Z\x 38.00
question arises. 4 x 2 44.00
2Z\x 44.50
3 46.50
5 x 4 54.00
6 x 4 61.50
5 67.00
8 x 6 74.50
10 x 8 89.50
Flange Parts For Styles 741, W741, 743 & 441 Vic-Flange Adapters
5 8 x 3Z\x + 124.50 +
section 1
C\v
6 8 C\v x 3Z\x + 142.00 +
8 8 C\v x 3Z\x + 179.50 +
10 12 M\, x 4 + 249.00 +
12 12 M\, x 4 + 364.00 +
14 * 12 1 x 4Z\x + 397.00 –
16 * 16 1 x 4Z\x + 705.50 –
18 * 16 1Z\, x 4C\v + 751.50 –
20 * 20 1Z\, x 5Z\v + + –
24 * 20 1Z\v x 5C\v + + –
28 www.victaulic.com PL2011-Main
Spare Parts
Flange Gaskets – Styles 741, W741, 743 and 441
Flange Gaskets For Style 741, W741, 743 & 441 Vic-Flange Adapters
spare parts
section 1
www.victaulic.com PL2011-Main 29
Spare Parts
Style 72 Outlet Coupling
M-2 Gaskets
8 +
30 www.victaulic.com PL2011-Main
Spare Parts
Plated Trackhead Bolts and Nuts
Go-No-Go Tape
Go-No-Go Tape Item Part No. Price Each Price Per Box *
Go-No-Go Tape (1) # RW75-100-MCH $51.00 –
Go-No-Go Tape (Box of 6) # RW75-100-KIT – $282.00
spare parts
section 1
www.victaulic.com PL2011-Main 31
Grooved IPS Pipe Fittings
Elbows –
No. 10 – 90°, No. 11 – 45°
Nom. Size 90° Elbow No. W10 45° Elbow No. W11
Request publication 20.05. Aprx. Price Each Aprx. Price Each
Wgt. Ea. C-E Wgt. Ea. C-E
Inches Lbs Inches Painted Galv. Lbs Inches Painted Galv.
14 150.8 14.00 $2152.00 $2792.00 63.0 5.80 $1611.00 $2063.00
10 LIC
o.W AU
T
VIC
N
NOTE: Large diameter 14 – 24” steel fittings are supplied standard with AGS roll grooves.
W11
VICT
Original cut grooved fittings require the use of Original Groove System (OGS) Style 77 couplings. Original cut grooved fittings
are non-cancellable and non-returnable. Contact Victaulic for cut groove pricing and availability.
No. W11
NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls.
32 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. 12 – 22Z\x°, No. 13 – 11Z\v°
Nom. Size 22Z\x° Elbow No. W12 11Z\v° Elbow No. W13
Request publication 20.05.
section 1
16 58.0 5.00 1527.00 2138.50 42.0 4.00 1418.50 1891.00
No. W12 18 65.0 5.50 1849.00 2624.00 53.2 4.50 1717.50 2328.00
20 78.6 6.00 2321.50 3648.00 65.0 5.00 2102.00 2912.50
24 140.0 7.00 3961.00 4581.00 60.0 6.00 3668.00 3700.50
www.victaulic.com PL2011-Main 33
Grooved IPS Pipe Fittings
No. 100 and No. 110 1Z\x D Long Radius Elbows
Long Radius – Long Radius – 90° Long Radius Elbow or 45° Long Radius Elbow
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
1Z\x D Elbows Aprx. Price Each Aprx. Price Each
Wgt. Ea. C-E Wgt. Ea. C-E
Request publication 07.01. Inches Lbs Inches Painted Galv. Lbs Inches Painted Galv.
2 2.5 4.38 $139.00 $182.00 1.8 2.75 $120.50 $152.50
2Z\x 4.1 – 174.00 200.00 2.8 – 386.00 435.00
3 6.0 5.88 139.00 182.00 4.9 3.38 120.50 152.50
4 12.3 7.50 207.00 277.00 7.3 4.00 146.50 195.00
5 (s) 18.2 – 1052.50 1206.00 14.8 – 977.50 1072.50
6 30.4 10.75 602.00 791.00 17.4 5.50 432.00 553.50
No. 100 8 66.0 14.25 1439.50 1840.50 36.0 7.25 750.50 976.00
10 107.0 15.00 2982.00 3594.50 57.0 6.25 2236.50 2550.50
12 156.0 18.00 3013.50 3999.00 90.0 7.50 2590.00 3179.50
AGS Long Radius AGS Long Radius – 90° Long Radius Elbow or 45° Long Radius Elbow
Nom. Size 90° Long Rad. Elbow No. W100 45° Long Rad. Elbow No. W110
– 1Z\x D Elbows Aprx. Price Each Aprx. Price Each
Wgt. Ea. C-E Wgt. Ea. C-E
Request publication 20.05.
Grooved IPS Pipe Fittings
0
T
VIC
section 1
Original cut grooved fittings require the use of Original Groove System (OGS) Style 77 couplings. Original cut grooved fittings
are non-cancellable and non-returnable. Contact Victaulic for cut groove pricing and availability.
No. W110 NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
Reducing Base Reducing Base Support Elbows – Grooved X Grooved or Grooved X Flanged
Nom. Size Grooved x Grooved No. R-10G Grooved x Flanged No. R-10F
Support Elbows Aprx. Price Each Aprx. Price Each
Inches Wgt. Each Wgt. Each
Request publication 07.01. Inlet x Outlet Lbs Painted Galv. Lbs Painted Galv.
6 x 4 19.0 $1002.50 $1176.00 33.0 $1113.00 +
6 x 5 23.0 1135.00 + 38.0 1260.00 +
8 x 6 33.0 1523.50 1797.50 51.0 1692.00 +
10 x 8 61.0 2280.50 2717.50 88.0 2534.00 +
No. R-10F
Grooved x Flanged
34 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. 10-DR Drain Elbow
Request Victaulic
publication 10.01 for details.
Tee with
Request publication 07.01. Aprx. Tee Male Threaded
Nom. Size Wgt. Ea. No. 20 Branch No. 29M
Price Each Price Each
Inches Lbs Painted Galv. Painted Galv.
C\v 0.6 $123.00 $133.50 + +
1 1.0 94.50 124.00 – –
No. 20 1Z\v 1.5 94.50 124.00 $199.00 $234.00
1Z\x 2.0 94.50 124.00 310.50 366.00
2 3.0 94.50 124.00 199.00 234.00
2Z\x 4.3 94.50 124.00 – –
section 1
4Z\x 15.0 (sw) + + – –
5 17.8 463.50 588.00 1186.00 +
6 25.7 535.00 730.00 1059.00 1246.50
8 47.6 1172.50 1539.00 + +
10 73.0 2435.00 3152.50 + +
12 99.0 3393.50 4335.00 + +
www.victaulic.com PL2011-Main 35
Grooved IPS Pipe Fittings
No. 35 Cross, No. 33 True Y
Cross and Wye Cross and Wye – Steel Cross or Steel 90 True Y
AGS Cross and AGS Cross and Wye – Steel Cross or Steel 90 True Y
Grooved IPS Pipe Fittings
Original cut grooved fittings require the use of Original Groove System (OGS) Style 77 couplings. Original cut grooved fittings
L
o.W U
N TA
VIC
are non-cancellable and non-returnable. Contact Victaulic for cut groove pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
No. W33
36 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No(s). 40, 42, and 43 Adapter Nipples
Adapter Nipples ‡ Adapter Nipples – Grooved X Threaded, Grooved X Beveled, or Grooved X Grooved
section 1
No. W42 AGS Grooved X Beveled,
No. W43 AGS Grooved X AGS Grooved, or
Nipples No. W49 AGS Grooved X C606 Original Grooved
No. W43
No. W49
www.victaulic.com PL2011-Main 37
Grooved IPS Pipe Fittings
No. 80 Female Threaded Adapter
Aprx. No. 80
Adapter Nom. Size Wgt. Each Price Each
Inches Lbs Painted Galv.
Request publication 07.01.
C\v 1.0 $317.00 $351.00
1 1.0 339.50 364.50
1Z\v 1.5 179.00 200.50
1Z\x 1.5 232.50 247.50
No. 80 2 1.4 109.50 128.50
2Z\x 1.5 109.50 128.50
3 2.9 127.00 155.50
4 4.5 194.50 244.00
Adapter Elbows Adapter Elbows – 90° Adapter Elbow or 45° Adapter Elbow
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Request publication 07.01. Aprx. Price Each Aprx. Price Each
Wgt. Ea. Wgt. Ea.
Inches Lbs Painted Galv. Lbs Painted Galv.
C\v 0.5 $157.50 $168.00 0.5 $160.50 $170.00
1 0.5 105.50 131.00 0.6 – –
1Z\v 0.9 118.00 131.00 0.6 – –
1Z\x 1.1 150.50 175.00 0.9 174.00 186.00
No. 18
2 2.5 105.50 131.00 1.9 – –
2Z\x 3.0 183.50 200.50 2.3 179.00 185.50
Grooved ips pipe fittings
38 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. 25 Grooved Reducing Tee
section 1
2Z\x (d) 11.4 239.00 314.00
3 (d) 11.6 239.00 314.00
5 x 5 x 1 14.0 526.50 648.50
1Z\x 14.3 669.00 724.50
2 14.5 579.50 716.00
2Z\x (d) 15.2 472.00 594.50
3 (d) 16.6 472.00 594.50
4 (d) 16.7 511.00 645.50
6 x 6 x 1 23.0 635.50 779.00
1Z\x 24.0 656.50 899.50
2 (d) 21.6 562.50 739.00
2Z\x (d) 21.4 562.50 739.00
3 (d) 26.5 562.50 739.00
4 (d) 25.0 562.50 739.00
5 (d) 23.2 562.50 743.50
8 x 8 x 1Z\x 33.0 811.00 987.00
2 33.5 811.00 1024.00
2Z\x 39.0 811.00 1024.00
3 33.6 873.50 1044.50
www.victaulic.com PL2011-Main 39
Grooved IPS Pipe Fittings
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
section 1
40 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. W25 AGS Grooved Reducing Tee
section 1
18 453.0 7473.50 10266.50
20 473.0 8113.50 11896.50
www.victaulic.com PL2011-Main 41
Grooved IPS Pipe Fittings
No. 29T Threaded Reducing Tee
42 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
section 1
2Z\x x C\v 1.3 566.50 611.50 3.3 851.50 959.50
1 3.3 97.00 112.00 3.5 793.00 878.50
1Z\v 3.3 (d) 71.50 84.00 3.5 79.00 92.50
1Z\x 3.6 (d) 71.50 84.00 3.7 366.50 419.00
2 3.9 (d) 71.50 84.00 4.3 (d) 149.50 203.50
3 x C\v 1.5 570.00 637.00 4.8 + +
1 1.3 (d) 78.00 95.00 4.8 851.00 936.00
1Z\v 3.0 125.50 144.50 4.8 771.00 +
1Z\x 5.1 (d) 86.00 105.00 5.1 423.00 495.00
2 1.6 (d) 63.00 77.00 6.0 (d) 170.50 233.50
2Z\x 1.6 (d) 86.00 104.00 7.0 (d) 170.50 239.00
3Z\x x 3 2.0 (d) 91.50 110.50 7.0 935.00 +
4 x 1 2.4 (d) 94.50 116.50 6.5 1723.00 +
1Z\v 4.6 729.00 817.00 – – –
1Z\x 6.9 131.00 173.00 8.1 1042.50 1125.50
2 2.4 (d) 84.00 103.00 8.0 (d) 208.00 291.00
2Z\x 2.7 (d) 104.00 126.50 7.6 (d) 208.00 291.00
3 2.5 (d) 104.00 126.50 7.8 (d) 208.00 291.00
3Z\x 2.9 (d) 104.00 126.50 8.0 1459.00 +
5 x 2 9.0 1026.00 1133.00 5.2 1149.50 +
2Z\x 11.0 212.00 258.50 10.8 979.50 +
3 4.9 (d) 120.50 149.50 11.1 946.50 1055.00
4 4.3 (d) 143.50 180.00 12.0 (d) 283.00 399.50
www.victaulic.com PL2011-Main 43
Grooved IPS Pipe Fittings
44 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. W50 AGS Concentric Reducers, No. W51 AGS Eccentric Reducers
section 1
Original cut grooved fittings require the use of Original Groove System (OGS) Style 77 couplings. Original cut grooved fittings
are non-cancellable and non-returnable. Contact Victaulic for cut groove pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls.
* Single and double reduction concentric and eccentric reducers 14 - 24” are cast ductile iron and supplied with AGS roll
grooves, all others made of segmentally welded steel supplied with AGS roll grooves. Steel reducers with the same E to E
dimensions may be substituted to meet delivery requirements.
www.victaulic.com PL2011-Main 45
Grooved IPS Pipe Fittings
No. 52 – Reducer Threaded Small End
Nominal Aprx.
Threaded Small End Size Wgt. Ea. Price Each
Inches
Request publication 07.01. Inlet x Outlet Lbs Painted Galv.
1Z\x x 1 0.8 $74.50 $91.50
1Z\v 0.8 78.00 92.00
2 x C\v 0.9 74.50 91.50
No. 52
1 0.7 74.50 91.50
1Z\v 1.2 74.50 91.50
1Z\x 1.0 74.50 91.50
2Z\x x 1 1.0 100.50 116.00
1Z\v 1.2 105.50 130.00
1Z\x 1.3 110.50 130.00
2 1.4 74.50 91.50
3 x C\v (s) 1.2 536.50 571.50
1 1.3 81.00 97.50
1Z\x 1.5 91.50 109.50
2 1.5 91.50 109.50
2Z\x 1.7 110.50 130.00
4 x 1 2.3 104.50 126.50
1Z\x (s) 2.5 245.00 321.00
2 2.6 111.00 133.50
2Z\x 2.6 111.50 137.00
3 2.5 136.50 162.00
5 x 4 (s) 4.5 777.50 846.00
6 x 1 5.5 212.00 260.50
2 5.7 212.00 260.50
Grooved ips pipe fittings
5 (s) 17.5 + +
No. 30 Lateral
46 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
Lateral Lateral
section 1
16 344.2 5283.00 6785.50
VICTAULIC
No.W30
www.victaulic.com PL2011-Main 47
Grooved IPS Pipe Fittings
No. 60 Cap
Cap Cap
48 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. 30R Reducing Lateral
section 1
www.victaulic.com PL2011-Main 49
Grooved IPS Pipe Fittings
No. W30R AGS Reducing Lateral
Original cut grooved fittings require the use of Original Groove System (OGS) Style 77 couplings. Original cut grooved fittings
are non-cancellable and non-returnable. Contact Victaulic for cut groove pricing and availability.
NOTE: AGS products must NOT be used on pipe that has been grooved using original rolls.
† All No. W30R fittings are segmentally welded steel.
NOTE: For original roll grooved 14 – 24” fittings please contact your local Victaulic sales representative.
50 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. 32 Tee Wye
No. 32
4 26.0 1016.50 1236.50
5 x 5 x 3 29.0 1277.50 1497.50
4 36.7 1472.00 1644.00
5 48.0 2164.00 2643.00
6 x 6 x 3 37.3 1046.00 1350.50
4 46.3 1275.00 1594.00
5 55.0 + +
6 60.5 1940.00 2399.50
8 x 8 x 3 76.0 1246.00 1810.00
4 76.4 1484.50 2046.00
5 85.6 1965.00 2585.50
6 112.0 2143.00 2803.00
8 127.1 2953.00 3744.00
10 x 10 x 3 96.0 1716.50 2380.00
4 97.4 1882.50 2585.50
5 115.1 + 3154.00
6 133.1 2497.50 3313.50
section 1
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† All No. 32 fittings are segmentally welded steel.
www.victaulic.com PL2011-Main 51
Grooved IPS Pipe Fittings
No. 61 Bull Plug
Electroplated
Request publication 07.01. Nom. Size Steel Bull Plug No. 61
Aprx.
Wgt. Ea.
Inches Lbs Price Each
2 2.0 $186.50
No. 61 2Z\x 3.0 186.50
3 4.5 273.00
4 7.5 351.50
5 12.0 766.50
6 17.0 826.50
Length
Request publication 07.01. Nom. Size Inches Steel Hose Nipple No. 48
Aprx. Price Each
Wgt. Ea.
Inches End to End Lbs Painted Galv.
C\v 3.25 0.3 $121.50 $145.00
No. 48 1 3.25 0.4 121.50 +
1Z\v 3.63 0.6 121.50 +
1Z\x 4.00 0.8 121.50 145.00
2 4.63 1.1 121.50 145.00
2Z\x 5.50 2.0 121.50 145.00
Grooved ips pipe fittings
Flanged Adapter Flanged Adapter Nipples – 125 lb, 150 lb, or 300 lb *
52 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
No. W45 AGS Flanged Adapter Nipple
Aprx.
Adapter Nipple Nom. Size Wgt. Ea. AGS Flanged Adapter Nipple – No. W45 *
Price Each
Request publication 20.05.
Inches Lbs Painted Galv.
14 x 8 122.0 $3994.00 $4442.50
16 x 8 136.0 4759.50 5525.50
18 x 8 168.0 5269.00 5736.00
20 x 8 208.0 5527.00 5980.50
No. W45 24 x 8 274.0 5787.00 6226.00
section 1
90° 3D Cast Elbow
www.victaulic.com PL2011-Main 53
Grooved IPS Pipe Fittings
Long Radius Elbows – 3D
3D Long Radius Steel 3D Long Radius Elbows – 90° Elbow, 60° Elbow, or 45° Elbow
54 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
Long Radius Elbows – 5D
5D Long Radius Steel 5D Long Radius Elbows – 90° Elbow, 60° Elbow, or 45° Elbow
section 1
Nom. Size No. 15-5D No. 12-5D No. 13-5D
Aprx. Aprx. Aprx.
Wgt. Ea. Wgt. Ea. Wgt. Ea.
Inches Lbs Price Each Lbs Price Each Lbs Price Each
2 4.0 + 3.6 + 3.0 +
No. 15-5D 2Z\x 7.0 + 6.2 + 5.0 +
30° Elbow 3 10.0 + 8.8 + 6.9 +
3Z\x 13.0 + 11.3 + 8.7 +
4 16.6 + 14.3 + 10.7 +
4Z\x 21.7 + 18.6 + 14.0 +
5 28.1 + 24.1 + 18.2 +
No. 12-5D No. 13-5D 6 43.8 + 37.6 + 28.3 +
22° Elbow 11° Elbow 8 87.9 + 75.4 + 56.8 +
10 155.8 + 133.7 + 100.6 +
12 228.9 + 196.4 + 147.8 +
14 † 627.0 + 252.3 + 189.8 +
16 † 385.3 + 330.7 + 248.8 +
18 † 489.0 + 419.7 + 315.7 +
20 † 605.0 + 519.2 + 390.6 +
24 † 873.9 + 750.1 + 564.3 +
www.victaulic.com PL2011-Main 55
Grooved IPS Pipe Fittings
Long Radius Elbows – 6D
6D Long Radius Steel 6D Long Radius Elbows – 90° Elbow, 60° Elbow, or 45° Elbow
56 www.victaulic.com PL2011-Main
Grooved IPS Pipe Fittings
Extra Heavy “ES” Fittings
Pipe
Request publication 07.03. Inches 90° Elbow No. 62 45° Elbow No. 63 Tee No. 64
Price Each
Nominal Size Actual Size Painted Painted Painted
2 (d) 2.375 $267.00 $349.00 $444.50
2Z\x 2.875 370.00 349.00 561.00
3 (d) 3.500 284.50 349.00 603.00
No. 62
4 (d) 4.500 374.00 463.00 689.00
6 6.625 1372.00 745.50 1451.50
No. 64
www.victaulic.com PL2011-Main 57
Grooved IPS Pipe Fittings
Steel (IPS) to Copper Style 47-GG – Steel (IPS) to Copper (CTS) Transition Fitting
Grooved ips pipe fittings
Style 47-GG Nominal Size Steel (IPS) Copper (CTS) Inches per Unit per Box Lbs
2 – 3”
Grooved x Grooved
4 – 8”
Grooved x Grooved
58 www.victaulic.com PL2011-Main
SECTION 2 – Hole Cut Products
Hole Cut
Products
www.victaulic.com PL2011-MAIN 59
Hole Cut Products
Styles 920/920N Female Threaded Mechanical-T® Outlet
Complete Mechanical-T
Size Style Female Threaded Branch † Spare Parts
Styles 920 and 920N Aprx. Price Each Standard
Request publication 11.02. Inches Wgt. Ea. Bolts & Nuts Size Grade “E” or “T”
Run x Brch. Number Lbs Painted Galv. Inches Gaskets
2 x Z\x 920N 3.1 $58.00 $73.50 Z\x x 2C\v +
C\v 920N 3.1 58.00 73.50 Z\x x 2C\v +
1 920N 3.0 58.00 73.50 Z\x x 2C\v $11.50
1Z\v 920N 3.5 67.00 84.00 Z\x x 2C\v 13.00
1Z\x 920N 3.6 67.00 84.00 Z\x x 2C\v 13.00
2Z\x x Z\x 920N 3.0 58.00 73.50 Z\x x 2C\v +
C\v 920N 3.0 58.00 73.50 Z\x x 2C\v +
1 920N 2.9 58.00 73.50 Z\x x 2C\v 11.50
1Z\v 920N 3.5 82.50 100.50 Z\x x 3Z\v 13.00
1Z\x 920N 3.6 82.50 100.50 Z\x x 3 13.00
Style 920 Female
3 x Z\x 920N 3.4 67.00 82.50 Z\x x 2C\v +
C\v 920N 3.4 67.00 82.50 Z\x x 2C\v +
1 920N 3.3 67.00 82.50 Z\x x 2C\v 11.50
1Z\v§ 920N 3.8 85.50 107.50 Z\x x 2C\v 13.00
1Z\x§ 920N 4.1 85.50 107.50 Z\x x 2C\v 13.00
2§ 920N 4.9 98.50 122.50 Z\x x 3Z\v 13.00
4 x Z\x 920N 3.7 85.00 101.50 Z\x x 2C\v +
C\v 920N 3.7 85.00 101.50 Z\x x 2C\v +
1 920N 3.6 85.00 101.50 Z\x x 2C\v 11.50
1Z\v 920N 4.0 100.00 118.00 Z\x x 2C\v 13.00
1Z\x 920N 4.2 104.00 131.00 Z\x x 2C\v 13.00
2 920N 5.0 104.00 132.00 Z\x x 2C\v 13.00
2Z\x 920 5.8 108.50 141.00 1 x 2C\v 15.00
3 920 8.4 115.50 148.50 1 x 3Z\v 16.50
5 x 1Z\x 920 7.7 127.00 161.00 B\, x 4C\v 13.00
2 920 8.2 127.00 161.00 B\, x 4C\v 13.00
2Z\x 920 8.3 134.00 171.00 B\, x 4C\v 15.00
3 920 8.4 143.00 184.00 B\, x 4C\v 16.50
6 x 1Z\v 920N – – – Z\x x 2C\v 13.00
1Z\x 920N 5.1 130.50 167.00 Z\x x 2C\v 13.00
2 920N 5.6 130.50 167.00 Z\x x 2C\v 13.00
2Z\x 920 7.6 140.50 181.50 B\, x 4C\v 15.00
3 920 8.4 149.00 192.00 B\, x 4C\v 16.50
4 920 10.1 165.50 215.50 B\, x 4C\v 22.50
8 x 2 920 11.6 228.00 288.50 C\v x 4Z\v 15.50
2Z\x 920 11.6 228.00 288.50 C\v x 4Z\v 15.50
3 920 12.6 241.00 305.50 C\v x 4Z\v 16.50
4 920 15.3 248.00 321.00 C\v x 4Z\v 22.50
60 www.victaulic.com PL2011-MAIN
Hole Cut Products
Styles 920/920N Grooved Mechanical-T Outlet
Complete Mechanical-T
Size Style Grooved Branch Spare Parts
Styles 920/920N Aprx. Price Each Standard
Request publication 11.02. Inches Wgt. Ea. Bolts & Nuts Size Grade “E” or “T”
Run x Brch. Number Lbs Painted Galv. Inches Gaskets
2 x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – $11.50
1Z\v 920N 3.5 $67.00 $84.00 Z\x x 2C\v 13.00
1Z\x 920N 3.2 67.00 84.00 Z\x x 2C\v 13.00
2Z\x x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – 11.50
1Z\v 920N 3.2 82.50 100.50 Z\x x 3Z\v 13.00
1Z\x 920N 3.3 82.50 100.50 Z\x x 3 13.00
Style 920 Grooved 3 x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – 11.50
1Z\v§ 920N 3.7 85.50 107.50 Z\x x 2C\v 13.00
1Z\x§ 920N 3.8 85.50 107.50 Z\x x 2C\v 13.00
2§ 920N 4.6 98.50 122.50 Z\x x 3Z\v 13.00
3Z\x x 2 920N 5.0 386.50 482.50 Z\x x 2C\v 13.00
4 x Z\x 920N – – – – –
C\v 920N – – – – –
1 920N – – – – 11.50
1Z\v 920N 3.6 100.00 118.00 Z\x x 2C\v 13.00
1Z\x 920N 3.9 104.00 131.00 Z\x x 2C\v 13.00
2 920N 4.6 104.00 132.00 Z\x x 2C\v 13.00
2Z\x 920 5.0 108.50 141.00 Z\x x 2C\v 15.00
3 920 6.4 115.50 148.50 Z\x x 3Z\v 16.50
5 x 1Z\x 920 7.6 127.00 + B\, x 4C\v 13.00
2 920 8.0 127.00 + B\, x 4C\v 13.00
2Z\x 920 7.9 134.00 + B\, x 4C\v 15.00
3 920 8.8 143.00 184.00 B\, x 4C\v 16.50
6 x 1Z\v 920N 4.8 130.50 167.00 Z\x x 2C\v 13.00
1Z\x 920N 5.1 130.50 167.00 Z\x x 2C\v 13.00
2 920N 5.6 130.50 167.00 Z\x x 2C\v 13.00
2Z\x 920 8.3 143.00 181.50 B\, x 4C\v 15.00
3 920 9.9 149.00 192.00 B\, x 4C\v 16.50
4 920 10.1 165.50 215.50 B\, x 4C\v 22.50
8 x 2 920 11.4 228.00 + C\v x 4Z\v +
2Z\x 920 11.6 228.00 288.50 C\v x 4Z\v 15.50
3 920 11.6 241.00 305.50 C\v x 4Z\v 16.50
4 920 12.5 248.00 321.00 C\v x 4Z\v 22.50
www.victaulic.com PL2011-MAIN 61
Hole Cut Products
Vic-Tap II Hot Tap
Vic-Tap® II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into
systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and
HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”,
6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Shipping Weight Rental
Tool Model Part Number Lbs Per Month List Price
Vic-Tap II - Parts A and B only R-000-902-VT2 70 $3192.00 $7046.50
Part A only R-100-902-VT2 – – 4805.50
Part B only R-300-901-VT1 – – 4814.00
Part C 4 x 2Z\x R-016-931-010 – – 1411.50
5 x 2Z\x R-020-931-010 – – 1411.50
6 x 2Z\x R-024-931-010 – – 1411.50
8 x 2Z\x R-032-931-010 – – 1474.50
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $500.50. Part. No. N-E15-000-004.
hole cut products
section 2
62 www.victaulic.com PL2011-MAIN
Hole Cut Products
Styles 920/920N Mechanical-T Cross
Mechanical-T Cross The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T
Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T
Style 920/920N *
outlets are available with either grooved or female threaded outlets. Your choice must be specified on
each order.
Request publication 11.03.
Styles 920/920N – Mechanical-T Cross
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact
Victaulic for details.
www.victaulic.com PL2011-MAIN 63
Hole Cut Products
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact
Victaulic for details.
section 2
64 www.victaulic.com PL2011-MAIN
Hole Cut Products
www.victaulic.com PL2011-MAIN 65
Hole Cut Products
Style 923 Vic-Let™ Strapless Outlet
VIC-LET COMPLETE
Strapless Outlet Nominal Size With “E” or “T” Gasket *
Aprx. Wgt. Per Unit Price
Inches Lbs Per Unit
Style 923
4 – 8 x Z\x NPT IPS 2.28 $141.50
Request publication 11.05.
4 – 8 x C\v NPT IPS 2.28 151.50
10 and larger x Z\x NPT IPS 2.16 141.50
10 and larger x C\v NPT IPS 2.16 151.50
4 – 8”
10” – Up
VIC-O-WELL COMPLETE *
Thermometer Outlet Nominal Size With “E” Gasket
Aprx. Wgt.
Per Unit Price
Style 924 Inches Lbs Per Unit
Request publication 11.06. 4 – 8 for 6 Stem # 3.78 $214.00
10 Flat for 6 Stem # 3.78 214.00
4 – 8”
hole cut products
section 2
10” – up
66 www.victaulic.com PL2011-MAIN
SECTION 3 – Valves and Specialties
Valves
and Specialties
www.victaulic.com PL2011-main 67
Grooved IPS Pipe Valves
Vic-300 MasterSeal® Butterfly Valve
Product, body material and disc/stem are standard as listed below. Please specify size, seat, and operator
when ordering. Please see the next page for numbering chart information.
For power actuation, contact Victaulic for your nearest authorized valve actuation center.
section 3
68 www.victaulic.com PL2011-main
Grooved IPS Pipe Valves
section 3
Gear Operator with Chain 1326.00 1442.00 1469.00 1594.50 2197.50 2256.50 2692.00 3679.50 4036.50
Wheel “E” or “T”
Gear Operator with
Memory Stop & Chain 1436.00 1552.50 1579.00 1704.50 2308.00 2394.00 2830.50 3891.00 4247.50
Wheel “E” or “T”
Gear Operator with AWWA POA POA POA POA POA POA POA POA POA
2” Square Operator Nut
ALUMINUM GEAR OPERATOR WITH STAINLESS STEEL TRIM
Gear Operator with “E” or $1236.50 $1400.00 $1402.50 $1649.00 $2681.50 $2908.00 $4033.00 $6429.50 $7274.50
“T” Seat
Gear Operator with “O” Seat 1415.50 1557.50 1628.00 1769.50 2765.50 3669.50 4867.50 6659.00 7656.00
ALUMINUM GEAR OPERATOR WITH ALUMINUM BRONZE TRIM
Gear Operator with “E” or POA POA POA POA POA POA N/A N/A N/A
“T” Seat
Gear Operator with “O” Seat POA POA POA POA POA POA N/A N/A N/A
KITS (Kit prices do not include valve)
Spare Handwheel $36.50 $36.50 $36.50 $36.50 $74.50 $74.50 $74.50 $70.50 $70.50
Memory Stop (for Gear 116.50 116.50 116.50 116.50 152.50 152.50 152.50 221.00 221.00
Operator)
CONVERSION KITS (Conversion Kit prices do not include valve)
Gear Operator $675.00 $675.00 $675.00 $675.00 $675.00 $675.00 $675.00 $759.50 $759.50
10-Position Handle with 156.00 156.00 156.00 177.50 177.50 177.50 177.50 869.50 869.50
Memory Stop
10-Position – Tamper Proof 249.00 249.00 249.00 270.50 270.50 270.50 270.50 N/A N/A
V - 040 - 76 1 S E -0
Size
Type In./mm Code Series Body Material Disc/Stem Seat Operator
V 2/50 020 76 -Iron/IPS 1 - Ductile Iron S - Ductile Iron/416SS E - EPDM 0 - Bare
2½/65 024 B - Aluminum Bronze/ T - Lubricated 2 - 10-Position handle with memory stop
76.1 mm 761 416SS Nitrile 3 - Gear operator
3/80 030 V - Thermal Barrier O - Fluoro- 4 - Lever lock with tamper resistant
4/100 040 X - CF8M/416SS elastomer device (8"/200 mm)
108.0 mm 108 5 - Gear operator with memory stop
5/125 050 9 - Special * 9 - Special* 6 - Gear operator with chain wheel
133.0 mm 133 7 - Gear operator with memory stop and
139.7 mm 139 chain wheel
6/150 060 8 - Gear operator with AWWA 2" square
159.0 mm 159 oper. nut
165.1 mm 165
8/200 080 9 - Special*
10/250 100
12/300 120
NOTES:
* Details required with order
www.victaulic.com PL2011-main 69
Grooved IPS Pipe Valves
Vic-300 (14 – 24”) 300 psi AGS Butterfly Valve
70 www.victaulic.com PL2011-main
Grooved IPS Pipe Valves
Series 706 (14 – 24”) 300 psi Butterfly Valve
section 3
20 200 285.0 17857.00 21520.00 355.0 20220.50 23688.00
24 240 451.0 25656.00 29145.00 522.0 27062.00 31224.50
V - 180 - 1 5 8 2 - 20
See AGS Series Vic-300 and Series 706 Butterfly Valve Figure Numbering Chart on previ-
ous page.
www.victaulic.com PL2011-main 71
Grooved IPS Pipe Valves
Series 700 Butterfly Valve
V - 020 - 2 A A A - 1O
B - 040 - 8 6 6 6 - 15
72 www.victaulic.com PL2011-main
Grooved IPS Pipe Valves
Series 726 Grooved End Ball Valves
Grooved End Ball Series 726 – Carbon Steel or Stainless Steel Trim
Valve Complete
Valves Nominal Size
Aprx.
Weight Each
With Handle &
Tamper Resistant
Valve *
Complete With
Inches Lbs Lock/Seal Option Gear Operator
Series 726 WITH CARBON STEEL CHROME PLATED TRIM
section 3
2Z\x 10.4 676.50 1368.50
3 14.9 1093.00 1938.50
800 psi 8166-15 8166-20
4 41.5 1691.50 2470.00
6 78.5 5191.00 5827.00
WITH STAINLESS STEEL TRIM
1– 3” 1000 psi 1126-15 1126-20
1Z\x 4.8 295.00 762.00
2 7.5 478.50 1534.50
2Z\x 11.6 1209.50 1933.50
3 17.2 1556.00 2467.50
800 psi 8126-15 8126-20
4 45.0 2118.50 2998.50
6 82.0 5704.00 6642.50
B - 020 - 1 1 6 6 - 15
www.victaulic.com PL2011-main 73
Grooved IPS Pipe Valves
Series 722 Threaded Brass Ball Valve
Aprx. Wgt.
Nominal Size Each
Series 722 Inches Lbs Price Each
Z\v 0.2 $39.50
(Threaded) Z\x 0.4 55.50
grooved ips pipe valves
Check Valve Series 712 – Grade “E” or “T” or Grade “O” With Ductile Iron Body
High Pressure Series 713 – Grade “E” or “T” With Ductile Iron Body
Aprx.
Check Valve Size
Inches
Weight Each
Lbs
Grade “E” or “T”
Price Each
1000 psi 2 12.0 $984.50
74 www.victaulic.com PL2011-main
Grooved IPS Pipe Valves
Series 716H/716 Vic-Check® Valve
Aprx.
Check Valves Nominal Size
Inches
Weight Each
Lbs
“E” or “T”
Price Each
“O”
Price Each
2 10.7 $448.50 $636.00
Series 716H/716
2Z\x 3.6 467.50 654.50
Request publication 08.08.
section 3
6 28.0 1150.50 1594.50
8 40.0 1572.50 1881.50
10 100.0 4547.00 5981.50
12 140.0 5388.00 7183.50
www.victaulic.com PL2011-main 75
Grooved IPS Pipe Valves
Series 779 Venturi Check Valve
C - 040 - 1 4 1 0 - 02
Aprx.
Vic-Check® Valves Nominal Size
Inches
Weight Each
Lbs
Grade “E”
Price Each
14 140.0 $5894.50
AGS Series W715
16 160.0 8034.00
Request publication 20.08.
18 180.0 10605.50
20 200.0 13941.00
24 240.0 17577.50
76 www.victaulic.com PL2011-main
Grooved IPS Pipe Valves
Series 377 Vic-Plug Balancing Valve
With Lever
Nominal Size Operator With Gear Operator
Series 377 Aprx. Aprx.
Wgt. Each Wgt. Each
(AWWA Dimensions) Use with Inches Lbs Price Each Lbs Price Each
section 3
8 (100 – 175 psi) – – 140.0 4736.50
10 – – 218.0 6445.00
12 – – 308.0 9829.00
P - 080 - 2 1 1 1 - 81
Quantity Component
1 Series 365 Vic-Plug Valve
1 Series 317 AWWA Check Valve †
2 Style 307 Transition Coupling
1 Style 31 AWWA Coupling
www.victaulic.com PL2011-main 77
Grooved IPS Pipe Accessories
Series 731-D Suction Diffuser
20.1 6.30
2Z\x 26.0 6.30 1629.50
3 27.7 6.30 1652.00
4 x 2Z\x 29.7 7.40 1791.00
section 3
78 www.victaulic.com PL2011-main
Grooved IPS Pipe Accessories
Style 730 Vic-Strainer Tee Type Strainer
section 3
4 20.5 1471.00 1802.50 714.50 +
5 31.0 2130.50 2551.00 763.00 +
6 44.0 2312.00 2819.00 778.00 +
8 90.6 3543.50 4351.00 859.50 +
10 136.0 5203.00 6423.00 2031.50 +
12 197.0 6698.50 8248.00 2437.00 +
www.victaulic.com PL2011-main 79
Grooved IPS Pipe Accessories
Aprx.
Vic-Strainer® Nominal Size Weight Each Price Each
Standard Fine Perforated
Inches Lbs Standard * Basket Only Basket Only †
Series W732
14 425.0 $22203.50 $7418.50 +
Request publication 20.19.
16 600.0 27595.50 9221.00 +
18 800.0 34738.50 12017.00 +
80 www.victaulic.com PL2011-main
SECTION 4 – Hydronic Balancing Products
Hydronic Balancing
Products
www.victaulic.com PL2011-Main 81
Hydronic Balancing Products
Circuit Balancing Valves
TA Series 786 STAS
Balancing Valves
TA Series 786 TA Series 786 – STAS
Note: 1Z\x and 2”sizes available with fluoroelastomer gasket, contact Victaulic for pricing and availability.
section 4
Series 78K Series 78K – STADK Balancing Valve with Union Connection
Nominal Size
Inches
FPT End x MPT Union (400 psi) MPT Union x FPT Valve Victaulic Part Code Price Each
Request publication 08.16. Z\x x Z\x V-004-78K-CBV $141.00
C\v V-X87-78K-CBV 153.00
C\v x C\v V-006-78K-CBV 153.00
1 V-A61-78K-CBV 193.00
1 x 1 V-010-78K-CBV 191.00
1Z\v V-Z90-78K-CBV 253.00
1Z\v x 1Z\v V-012-78K-CBV 346.00
1Z\x V-Z91-78K-CBV 346.00
1Z\x x 1Z\x V-014-78K-CBV 346.00
2 V-J86-78K-CBV 434.00
2 x 2 V-020-78K-CBV 434.00
82 www.victaulic.com PL2011-Main
Hydronic Balancing Products
TA Series 788 STAF
Note: 2Z\x, 3, 4, 6, 8 10 and 12”sizes available with fluoroelastomer gasket, contact Victaulic for pricing and availability.
section 4
TA Series 786 and 787 Insulation Kits
www.victaulic.com PL2011-Main 83
Hydronic Balancing Products
TA Series 788 and 789 Insulation Kits
Spare Parts
2Z\x– 12
Replacement Extended Probe
Probe Port Port
0
STAD 2½
Plastic
Handwheel Aluminum
Handwheel
84 www.victaulic.com PL2011-Main
Hydronic Balancing Products
ATC
COIL
OR SUPPLY
Coil Hose (1) Series 78Y Series 78T
To calculate a price and create a configuration number for the Series 799 KOIL-KIT Coil Pack or Series 79V KOIL-KIT Coil Pack with ATC Valve, use
the following charts and a copy of the Series KOIL-KIT Coil Pack Contractor Order Form (a) (supplied by requesting contractor).
section 4
price and configuration number.
3. Add the price of each option to calculate your total price. If ordering a Series 79V KOIL-KIT Coil Pack with ATC Valve, an additional list price
charge of $75 will be added to the order. When selecting a Victaulic KOIL-KIT Coil Pack with ATC valve, the outlet of the Series 78U and the
inlet of the Series 78K must meet the connection requirements of the ATC valve, otherwise Victaulic will not pre-connect the ATC valve and
final assembly will be required in the field. Write the total price in Box 6 on the last page of this form.
4. Fill in the configuration number for each of your selected products in corresponding Boxes 1 through 5 on the last page of this form. If you
do not wish to purchase a certain product, use the configuration number for “None”. Be sure to use the corresponding row when entering
the completed configuration number. The Series 799 KOIL-KIT Coil Pack begins with K-799 and the Series 79V KOIL-KIT Coil Pack with ATC Valve
begins with K-79V.
5. Once completed, submit your order to Victaulic Customer Care via fax.
United States and Latin America (fax) 888-265-2018
The following items must be included or your order will not be processed:
1) All pages of the Distributor Order Form (b)
2) A copy of the Contractor Order Form (a)
3) Your purchase order
4) Bag and Tag information sheet (required if applicable)
www.victaulic.com PL2011-Main 85
Hydronic Balancing Products
Enter Selected
Price/
Configuration
Drain Valve Options (Choose Series 78Y or 78T or None) Number Below
Size
End Config.
Inlet x Outlet Z\x x Z\x C\v x Z\x C\v x C\v 1 x Z\x 1 x C\v 1x1 1Z\v x C\v 1Z\v x 1 1Z\v x 1Z\v 1Z\x x 1 1Z\x x 1Z\v 1Z\x x 1Z\x 2 x 1Z\v 2 x 1Z\x 2x2 Box 1
Series 78Y
Sweat x $109 $114 $114 $200 $180 $180 $227 $207 $207 $343 $323 $323 $400 $380 $380
Sweat YJJ YKJ YKK YLJ YLK YLL YMK YML YMM YNL YNM YNN YOM YON YOO
Sweat x $129 $134 $134 $220 $200 $200 $247 $227 $227 $363 $343 $343 $420 $400 $400
Fem. Thread YJA YKA YKB YLA YLB YLC YMB YMC YMD YNC YND YNE YOD YOE YOF
Sweat x $129 $134 $134 $220 $200 $200 $247 $227 $227 $363 $343 $343 $420 $400 $400
Male Thread YJP YKP YKQ YLP YLQ YLR YMQ YMR YMS YNR YNS YNT YOS YOT YOU
Fem. Thread $129 $134 $134 $220 $200 $200 $247 $227 $227 $363 $343 $343 $420 $400 $400 Price
x Sweat YAJ YBJ YBK YCJ YCK YCL YDK YDL YDM YEL YEM YEN YFM YFN YFO
Fem. Thread $109 $114 $114 $200 $180 $180 $227 $207 $207 $343 $323 $323 $400 $380 $380 $__________
x Fem.
Thread YAA YBA YBB YCA YCB YCC YDB YDC YDD YEC YED YEE YFD YFE YFF Configuration
Number
Fem. Thread $129 $134 $134 $220 $200 $200 $247 $227 $227 $363 $343 $343 $420 $400 $400
x Male
Thread YAP YBP YBQ YCP YCQ YCR YDQ YDR YDS YER YES YET YFS YFT YFU
PermaLynx x $124 $129 $129 $215 $195 $195 $242 $222 $222 $358 $338 $338 – – – __________
Sweat Y1J Y2J Y2K Y3J Y3K Y3L Y4K Y4L Y4M Y5L Y5M Y5N – – –
PermaLynx x $124 $129 $129 $215 $195 $195 $242 $222 $222 $358 $338 $338 – – –
Fem. Thread Y1A Y2A Y2B Y3A Y3B Y3C Y4B Y4C Y4D Y5C Y5D Y5E – – –
PermaLynx x $124 $129 $129 $215 $195 $195 $242 $222 $222 $358 $338 $338 – – –
Male Thread Y1P Y2P Y2Q Y3P Y3Q Y3R Y4Q Y4R Y4S Y5R Y5S Y5T – – –
$139 $144 $144 $230 $210 $210 $257 $237 $237 $373 $353 $353 – – –
hydronic balancing products
PermaLynx x
PermaLynx Y11 Y21 Y22 Y31 Y32 Y33 Y42 Y43 Y44 Y53 Y54 Y55 – – –
Series 78T OR
Sweat x $88 $92 $92 $164 $144 $144 $182 $166 $166 $275 $259 $259 $320 $304 $304
Sweat TJJ TKJ TKK TLJ TLK TLL TMK TML TMM TNL TNM TNN TOM TON TOO
section 4
Sweat x $104 $108 $108 $180 $160 $160 $198 $182 $182 $291 $275 $275 $336 $320 $320
Fem. Thread TJA TKA TKB TLA TLB TLC TMB TMC TMD TNC TND TNE TOD TOE TOF
Sweat x $104 $108 $108 $180 $160 $160 $198 $182 $182 $291 $275 $275 $336 $320 $320
Male Thread TJP TKP TKQ TLP TLQ TLR TMQ TMR TMS TNR TNS TNT TOS TOT TOU
Fem. Thread $104 $108 $108 $180 $160 $160 $198 $182 $182 $291 $275 $275 $336 $320 $320 Price
x Sweat TAJ TBJ TBK TCJ TCK TCL TDK TDL TDM TEL TEM TEN TFM TFN TFO
Fem. Thread $88 $92 $92 $164 $144 $144 $182 $166 $166 $275 $259 $259 $320 $304 $304 $__________
x Fem.
Thread TAA TBA TBB TCA TCB TCC TDB TDC TDD TEC TED TEE TFD TFE TFF Configuration
Number
Fem. Thread $104 $108 $108 $180 $160 $160 $198 $182 $182 $291 $275 $275 $336 $320 $320
x Male
Thread TAP TBP TBQ TCP TCQ TCR TDQ TDR TDS TER TES TET TFS TFT TFU
PermaLynx x $97 $101 $101 $173 $153 $153 $191 $175 $175 $284 $268 $268 – – – __________
Sweat T1J T2J T2K T3J T3K T3L T4K T4L T4M T5L T5M T5N – – –
PermaLynx x $97 $101 $101 $173 $153 $153 $191 $175 $175 $284 $268 $268 – – –
Fem. Thread T1A T2A T2B T3A T3B T3C T4B T4C T4D T5C T5D T5E – – –
PermaLynx x $97 $101 $101 $173 $153 $153 $191 $175 $175 $284 $268 $268 – – –
Male Thread T1P T2P T2Q T3P T3Q T3R T4Q T4R T4S T5R T5S T5T – – –
PermaLynx x $112 $116 $116 $188 $168 $168 $206 $190 $190 $299 $283 $283 – – –
PermaLynx T11 T21 T22 T31 T32 T33 T42 T43 T44 T53 T54 T55 – – –
NONE OR
Price
$0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
$__________
Configuration
000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 Number
__________
86 www.victaulic.com PL2011-Main
Hydronic Balancing Products
section 4
Price
$0 $0 $0 $0 $0 $0
$__________
Configuration
00 00 00 00 00 00 Number
__________
www.victaulic.com PL2011-Main 87
Hydronic Balancing Products
(Unconnected) 1E 2E 3E 4E 5E 6E Configuration
$57 $94 $159 $219 $349 $579 Number
36
1F 2F 3F 4F 5F 6F __________
NONE OR
section 4
Price
$0 $0 $0 $0 $0 $0
$__________
Configuration
00 00 00 00 00 00 Number
__________
88 www.victaulic.com PL2011-Main
Hydronic Balancing Products
Sweat x $55 $59 $59 $95 $75 $75 – $119 $99 $91 – $123 $103 $108 – $173 $153 $160
Sweat JJ KJ KK LJ LK LL – MK ML MM – NL NM NN – OM ON OO
Sweat x $55 $59 $59 $95 $75 $75 – $119 $99 $91 – $123 $103 $108 – $173 $153 $160
Fem. Thread JP KP KQ LP LQ LR – MQ MR MS – NR NS NT – OS OT OU
Sweat x $35 $39 $39 $75 $55 $55 $99 $99 $79 $71 $103 $103 $83 $88 $153 $153 $133 $140
Male Thread JA KA KB LA LB LC MA MB MC MD NB NC ND NE OC OD OE OF Price
Fem. Thread $55 $59 $59 $95 $75 $75 – $119 $99 $99 – $128 $108 $108 – $180 $160 $160
x Sweat AJ BJ BK CJ CK CL – DK DL DM – EL EM EN – FM FN FO $__________
Fem. Thread $55 $59 $59 $95 $75 $75 – $119 $99 $99 – $128 $108 $108 – $180 $160 $160 Configuration
x Fem.
AP BP BQ CP CQ CR – DQ DR DS – ER ES ET – FS FT FU Number
Thread
Fem. Thread $35 $39 $39 $75 $55 $55 $99 $99 $79 $79 $108 $108 $88 $88 $160 $160 $140 $140
x Male
Thread AA BA BB CA CB CC DA DB DC DD EB EC ED EE FC FD FE FF __________
PermaLynx x $65 $69 $69 $105 $85 $85 – $129 $109 $109 – $143 $123 $123 – – – –
Sweat 1J 2J 2K 3J 3K 3L – 4K 4L 4M – 5L 5M 5N – – – –
PermaLynx x $65 $69 $69 $105 $85 $85 – $129 $109 $109 – $143 $123 $123 – – – –
Fem. Thread 1P 2P 2Q 3P 3Q 3R – 4Q 4R 4S – 5R 5S 5T – – – –
PermaLynx x $55 $59 $59 $95 $75 $75 $119 $119 $99 $99 $128 $128 $108 $108 – – – –
Male Thread 1A 2A 2B 3A 3B 3C 4A 4B 4C 4D 5B 5C 5D 5E – – – –
NONE OR
Price
$0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
$__________
section 4
www.victaulic.com PL2011-Main 89
Hydronic Balancing Products
Male Union $156 $168 $229 $386 $168 $208 $323 $386 $209 $273 $339 $479 $366 $366 $479 $366 $459 $459 Price
x Sweat AJ AK AL AM BK BL BM BN CL CM CN CO DM DN DO EN EO FO $__________
Configuration
Male x $141 $153 $214 $366 $153 $193 $303 $366 $194 $253 $319 $454 $346 $346 $454 $346 $434 $434 Number
Female
AA AB AC AD BB BC BD BE CC CD CE CF DD DE DF EE EF FF __________
Male x $161 $173 $234 $386 $173 $213 $323 $386 $214 $273 $339 – $366 $366 – $366 – – Price
PermaLynx A1 A2 A3 A4 B2 B3 B4 B5 C3 C4 C5 – D4 D5 – E5 – – $__________
Female Configuration
$161 $173 $234 – $173 $213 $323 $386 $214 $273 $339 – $366 $366 $474 $366 $454 $454
Union x Number
Sweat VJ VK VL – WK WL WM WN XL XM XN – YM YN YO ZN ZO 7O __________
Female Union $141 $153 $214 – $153 $193 $303 $366 $194 $253 $319 – $346 $346 $454 $346 $434 $434 Price
x Female
Thread VA VB VC – WB WC WD WE XC XD XE – YD YE YF ZE ZF 7F $__________
Female Configuration
$161 $173 $234 – $173 $213 $323 $386 $214 $273 $339 – $366 $366 – $366 – –
Union x Number
PermaLynx V1 V2 V3 – W2 W3 W4 W5 X3 X4 X5 – Y4 Y5 – Z5 – – __________
TA Series 786 OR
Price
$80 – – – $85 – – – $114 – – – $176 – – $203 – $304
$__________
Sweat x
Sweat Configuration
JJ – – – KK – – – LL – – – MM – – NN – OO Number
__________
TA Series 787 OR
hydronic balancing products
Price
$78 – – – $85 – – – $116 – – – $178 – – $206 – $307
$__________
Female x
Female Configuration
PA – – – QB – – – RC – – – SD – – TE – UF Number
__________
section 4
NONE OR
Price
$0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0 $0
$__________
Configuration
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Number
__________
* If ordering a Series 79V KOIL-KIT™ Coil Pack with ATC Valve, an additional list price charge of $75.00 will be added to the order. When selecting a Victaulic KOIL-KIT Coil Pack with
ATC valve, the outlet of the Series 78U and the inlet of the Series 78K must meet the connection requirements of the ATC valve, otherwise Victaulic will not pre-connect the ATC
valve and final assembly will be required in the field.
90 www.victaulic.com PL2011-Main
Hydronic Balancing Products
Differential Pressure Controllers
TA Series 793 Differential Pressure Controller
Approx.
Size Wgt. Ea. Series 793 (Threaded)
Differential Pressure Actual Outside Differential
Controller – Nominal Size Diameter Pressure Range Victaulic Part Tour &
Inches Inches Lbs. psi Number Andersson Code Price Each
Threaded End
Z\x 0.840 2.4 1.45 – 8.70 V-004-793-CBV 52 266-015 $344.50
Request publication 08.29.
C\v 1.050 2.6 1.45 – 8.70 V-006-793-CBV 52 266-020 349.50
1 1.315 2.9 1.45 – 8.70 V-010-793-CBV 52 266-025 354.50
1Z\v 1.660 5.7 2.90 – 11.6 V-012-793-CBV 52 266-032 460.00
1Z\x 1.900 6.4 2.90 – 11.6 V-014-793-CBV 52 266-040 531.50
2 2.375 7.7 2.90 – 11.6 V-020-793-CBV 52 266-050 632.50
TA Series 794 TA Series 794 Differential Pressure Controller – (2.9 – 11.6 psi) Differential Pressure Range
Approx.
Size Wgt. Ea. Series 794 (Flanged)
Differential Pressure
section 4
Actual Outside Differential
Controller – Nominal Size Diameter Pressure Range Victaulic Part Tour &
Inches Inches Lbs. psi Number Andersson Code Price Each
Flanged End
(Class 150, ASME/ANSI B16.42) 2Z\x 2.875 46.3 2.9 – 11.6 V-024-794-116 52 266-065 $2559.00
Request publication 08.29. 3 3.500 52.9 2.9 – 11.6 V-030-794-116 52 266-080 2699.50
4 4.500 72.8 2.9 – 11.6 V-040-794-116 52 266-090 3622.50
TA Series 794 Differential Pressure Controller – (5.8 – 23.2) psi Differential Pressure Range
Approx.
Size Wgt. Ea. Series 794 (Flanged)
Actual Outside Differential
Nominal Size Diameter Pressure Range Victaulic Part Tour &
Inches Inches Lbs. psi Number Andersson Code Price Each
2Z\x 2.875 46.3 5.8 – 23.2 V-024-794-223 52-266-165 $2756.50
3 3.500 52.9 5.8 – 23.2 V-030-794-223 52-266-180 2952.00
4 4.500 72.8 5.8 – 23.2 V-040-794-223 52-266-190 3957.00
www.victaulic.com PL2011-Main 91
Hydronic Balancing Products
TA Differential Pressure Controller Accessories
Setting Tool
92 www.victaulic.com PL2011-Main
Hydronic Balancing Products
Balancing Instruments
TA Series 736 TA Link Differential Pressure Sensor
Instruments
TA Series 736 TA Series 736 – TA Link Differential Pressure Sensor
section 4
Series 73M TA CMI
TA Series 73M TA CMI is a computer programmed measuring instrument. It is a hand-held instrument for measuring
differential pressure, temperature and flow through balancing valves in hydronic systems. It consists of
TA CMI
a sensor unit and an instrument unit that has been programmed with TA valve characteristics, which
makes it possible to take a direct reading of flow differential pressures.
Request publication 08.16.
TA Series 73M – TA CMI
www.victaulic.com PL2011-Main 93
Hydronic Balancing Products
TA Series 734 Scope Balancing Instrument
94 www.victaulic.com PL2011-Main
SECTION 5 – Plain End Couplings and Fittings
Plain End
Couplings and
Fittings
www.victaulic.com PL2011-Main 95
Products for Plain End IPS Steel Pipe
Style 99 Roust-A-Bout ® Coupling
COUPLING COMPLETE †
Coupling PIPE
Inches
Aprx.
Wgt. Ea.
With Grade “E”
or “T” Gasket
Plated
Bolt & Nut
Price Each
Style 99 Nominal Outside Size
Size Diameter Lbs. Painted Galv. Inches
Request publication 14.02.
1 1.315 1.7 $129.50 $168.00 C\, x 2
1Z\x 1.900 3.6 129.50 168.00 Z\x x 2Z\x
2 2.375 5.3 129.50 168.00 B\, x 3Z\v
2Z\x 2.875 5.7 129.50 168.00 B\, x 3Z\v
3 3.500 8.7 190.00 249.00 C\v x 4Z\v
3Z\x 4.000 10.6 220.00 291.50 C\v x 4Z\v
4 4.500 12.8 220.00 292.00 C\v x 4Z\v
5 5.563 17.3 313.50 416.00 M\, x 5
6 6.625 23.2 382.00 519.00 1 x 6
8 8.625 37.2 674.50 902.50 M\, x 5
10 10.750 48.2 876.00 1176.00 M\, x 5
12 12.750 60.0 1099.50 1516.50 1 x 6Z\x
14 14.000 89.0 1509.50 1959.50 1 x 6Z\x
16 16.000 105.0 2065.50 2636.50 1 x 6Z\x
18 18.000 122.4 2756.00 3577.00 1 x 6Z\x
– –
96 www.victaulic.com PL2011-Main
Products for Plain End IPS Steel Pipe
Plated Trackhead Bolts and Nuts
Adapter Nipples Adapter Nipples – Plain to Threaded, Plain to Beveled, or Plain to Grooved
Plain
www.victaulic.com PL2011-Main 97
Products for Plain End IPS Steel Pipe
End Fittings
No. 10-P – 90° Elbow, No. 11-P – 45° Elbow
Plain End Fittings Plain End Fittings – 90° Elbow or 45° Elbow
98 www.victaulic.com PL2011-Main
Products for Plain End IPS Steel Pipe
No. 33-P – Wye, No. 30-P – Lateral
Nominal Cross
Size No. 35-P
Aprx. Price Each
Weight Each
Inches Lbs Painted Galv.
1 1.7 + +
No. 35-P 1Z\x 3.5 + +
2 5.2 + +
2Z\x 5.4 + +
3 8.5 + +
3Z\x 9.0 + +
4 10.8 + +
5 20.0 + +
6 30.0 + +
8 66.4 + +
10 103.0 + +
12 158.0 + +
www.victaulic.com PL2011-Main 99
Products for Plain End IPS Steel Pipe
No. 53-P – Swaged Nipples
Aprx. Aprx.
Nominal Size Wgt. Each Price Each Nominal Size Wgt. Each Price Each
No. 53-P Inches Lbs Electroplated Inches Lbs Electroplated
Request publication 14.04. 1Z\x x 1 1.2 + 6 x 1 17.0 +
2 x 1 2.0 + 1Z\x 16.0 +
1Z\x 2.0 + 2 16.0 +
2Z\x x 1 3.0 + 2Z\x 17.0 +
No. 53-P 1Z\x 3.0 + 3 17.0 +
2 3.0 + 3Z\x 17.0 +
3 x 1 4.5 + 4 17.0 +
1Z\x 4.5 + 5 17.5 +
2 4.5 + 8 x 3 29.0 +
2Z\x 4.5 + 4 29.0 +
3Z\x x 3 6.8 + 5 29.0 +
4 x 1 7.5 + 6 29.0 +
1Z\x 7.5 + 10 x 3 1.2 +
2 7.5 + 4 2.0 +
2Z\x 7.5 + 6 2.0 +
3 7.5 + 8 3.0 +
3Z\x 7.5 + 12 x 6 3.0 +
5 x 2 11.5 + 8 3.0 +
3 11.5 + 10 4.5 +
4 11.5 +
Reducing Tee
Nominal Size No. 25-P
No. 25-P Aprx. Price Each
Request publication 14.04. Inches Wgt. Each
Run x Branch Lbs Painted Galv.
1Z\x x 1Z\x x 1 2.2 + +
2 x 2 x 1 2.9 + +
1Z\x 3.1 + +
3 x 3 x 1 6.7 + +
No. 25-P 1Z\x 6.9 $265.00 $327.00
2 7.1 + 619.00
4 x 4 x 1 10.9 + +
1Z\x 11.1 + +
2 11.3 385.00 +
2Z\x 11.6 396.00 +
3 11.9 396.00 +
6 x 6 x 2 24.7 + +
Products for Plain End IPS Steel Pipe
3 25.4 + +
4 26.2 + 868.00
8 x 8 x 2 42.0 + +
3 44.0 + +
4 46.0 766.50 +
section 5
5 48.0 + +
6 50.0 898.50 +
10 x 10 x 4 74.0 + +
6 78.0 + +
8 86.0 + +
12 x 12 x 6 112.0 + +
8 118.0 + +
10 130.0 + +
Pressfit System
®
Products
5S stainless steel pipe provides a fast, easy, clean, reliable means for joining
Z\x– 2”/15 – 50 mm stainless steel pipe. Victaulic Type 304 stainless steel pipe is
0.065”/1.6 mm wall thickness and meets the requirements of ASTM A-312. Grade
304/304L (TP304 UNS, designation S30400). Only approved Vic-Press 304/304L
section 6
COLOR
GRADE TEMP. RANGE COMPOUND CODE * GENERAL SERVICE RECOMMENDATIONS
STANDARD O-RING
E
Recommended for hot water service within the specified tem-
Green perature range plus a variety of dilute acids, oil-free air and many
–30°F to +230°F EPDM Stripe chemical services. Not recommended for petroleum services. Not
recommended for steam services.
AVAILABLE O-RING
T
Recommended for petroleum products, air with oil vapors, veg-
Orange etable and mineral oils within the specified temperature range. Not
–20°F to +180°F Nitrile Stripe recommended for hot water services over +150°F/+66°C steam, or for
hot dry air over +140°F/+60°C.
OPTIONAL O-RING – Contact Victaulic for delivery time
O
Recommended for many oxidizing acids. petroleum oils, haloge-
Fluoro Blue nated hydrocarbons, lubricants, hydraulic fluids, organic liquids
+20°F to +300°F elastomer Stripe and air with hydrocarbons to +300°F/+149°C. Not recommended for
steam services.
* Pressfit stainless steel products must only be used on services compatible with o-ring and fitting materials. Incompatible
services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the
Victaulic Gasket Selection Guide (05.01) for specific recommendations.
WARNING
• Before attempting to install any Pressfit system products, carefully read and
fully understand the “Pressfit Products Installation Instructions” (I-500) and the
operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property
damage, product damage, joint leakage, and/or joint failure.
section 6
2 11.00 47.00
Style 597 Style 597 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
Standard Coupling ‡ Size Each Price Each †
W/Standard W/Optional
(P X P) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -597-X- _ -0
Z\x 0.12 $37.00 $50.50
Request publication 18.02.
C\v 0.16 40.50 55.00
1 0.23 46.00 66.50
1Z\x 0.45 63.00 98.50
2 0.73 82.50 131.50
Style 596 Style 596 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
Male Adapter – Threaded Size Each Price Each †
W/Standard W/Optional
(P X M) O-Ring O-Ring
Inches Lbs Grade E” or “T” Grade “O” *
F- _ _ _ -596-X- _ -M
Z\x x Z\x 0.22 $68.50 $74.50
Request publication 18.02.
C\v x Z\x 0.26 71.00 77.50
C\v 0.31 71.00 77.50
1 0.39 82.00 88.50
1 x C\v 0.35 84.50 93.50
1 0.40 84.50 93.50
1Z\x x C\v 0.60 158.00 175.00
1 1.50 141.50 166.00
1Z\x 0.66 141.50 158.50
2 x 2 1.00 174.50 197.50
Style 599 Style 599 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
pressfit system for type 304 ss pipe
Style 590 Style 590 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
90° Elbow Size Each Price Each †
W/Standard W/Optional
(P X P) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -590-X- _ -P
Z\x 0.38 $62.50 $75.00
Request publication 18.02.
C\v 0.42 69.00 83.50
1 0.61 82.00 102.50
1Z\x 1.38 162.50 198.00
2 2.30 208.50 257.00
Style 586 Style 586 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
90° Elbow – Short Tangent Size Each Price Each †
W/Standard W/Optional
(P X P) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -586-X- _ -P
C\v 0.32 $79.50 $94.00
Request publication 18.02.
1 0.50 94.00 114.00
1Z\x 1.04 186.50 222.00
2 1.50 239.00 288.50
Style 591 Style 591 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
section 6
1 0.53 82.00 102.50
1Z\x 1.27 162.50 198.00
2 1.97 208.50 257.00
Style 592 Style 592 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
Tee Size Each Price Each †
W/Standard W/Optional
(P X P X P) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -592-X- _ -P
Z\x 0.28 $128.00 $147.50
Request publication 18.02.
C\v 0.32 141.50 164.00
1 0.44 151.50 181.50
1Z\x 0.86 194.00 246.50
2 1.37 242.00 315.50
Style 593 Style 593 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
Tee – Reducing Branch Size Each Price Each †
W/Standard W/Optional
(P X P X P) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -593-X- _ -P
C\v x Z\x 0.38 $143.00 $165.00
Request publication 18.02.
1 x Z\x 0.40 147.50 174.50
C\v 0.41 150.50 177.50
1Z\x x Z\x 0.70 178.00 220.00
C\v 0.73 180.00 222.50
1 0.76 180.50 226.50
2 x Z\x 1.00 232.00 287.50
C\v 1.25 235.50 292.00
1 1.13 242.50 301.50
1Z\x 1.25 267.00 333.50
Style 588 Style 588 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
pressfit system for type 304 ss pipe
Nominal Aprx.
Size Weight Each
Concentric Reducer Inches Lbs Price Each
C\v x Z\x 0.20 $116.00
(T X T) 1 x Z\x 0.22 156.00
F- _ _ _ -594-X-2-T C\v 0.24 124.00
Request publication 18.02. 1Z\x x Z\x 0.35 219.50
C\v 0.36 206.00
1 0.39 114.50
2 x Z\x 0.58 408.50
C\v 0.61 183.50
1 0.61 141.50
1Z\x 0.68 141.50
Style 595 Style 595 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Flange Adapter W/Standard W/Optional
O-Ring O-Ring
(P X L) Inches Lbs Grade “E” or “T” Grade “O” *
Style 565 Style 565 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
section 6
1 3.60 246.50 259.00
1Z\x 5.00 272.00 294.00
2 5.90 291.50 322.00
Transition Nipple
Aprx.
Nominal Weight
Transition Nipple Size Each End to End
Inches Lbs Inches Price Each
Series 589 Series 589 – Pressfit Ends With Grade “E” or “T” O-Rings or Pressfit Ends With Optional Grade “O” O-Rings
Aprx.
Nominal Size Weight Each End to End Price Each †
Pressfit System Brass Body Pressfit Ends (P X P)
Ball Valve Pressfit Ends (P X P) With Optional Grade
With Grade “E” or “T” “O” *
Inches Lbs Inches O-Rings O-Rings
Stainless Steel Pressfit Ends
Z\x 1.0 8.49 $224.50 $237.50
V- _ _ _ -589-X- _ -P
C\v 1.3 8.84 246.50 261.00
Request publication 18.02.
1 1.8 9.68 295.50 315.00
1Z\x 3.4 11.07 415.00 449.50
2 4.4 12.89 508.00 558.00
Style 584 Style 584 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
pressfit system for type 304 ss pipe
Style 582 Style 582 – With Standard O-Ring Grade “E” or “T”
Aprx.
Nominal Weight
Reducer Insert Size Each Unit Price Each †
W/Standard W/Optional
(P X T) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -582-X- _ -T
1 x C\v 0.24 $100.00 $107.50
Request publication 18.02.
2 x 1Z\x 0.68 122.00 140.00
Style 561 Style 561 – With Standard O-Ring Grade “E” or “T”
Aprx.
Nominal Weight
Adapter Size Each Unit Price Each †
W/Standard W/Optional
(P X T) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
F- _ _ _ -561-X- _ -T
Z\x x Z\x 0.22 $68.50 $75.00
C\v x C\v 0.26 51.50 78.50
1 x 1 0.40 84.50 94.50
1Z\x x 1Z\x 0.66 147.50 184.50
2 x 2 1.00 174.50 199.50
Vic-Press 304 Pipe For Type 304/304L Schedule 5S stainless steel pipe approved for use with the Victaulic Vic-Press 304
System for stainless steel pipe, contact Victaulic or your nearest Vic-Press 304 Stainless Steel distributor.
section 6
Vic-Press 304 pipe sales may not be combined with Vic-Press 304 fittings or any other Victaulic products
for any special terms, conditions or allowances. No returns of Vic-Press 304 pipe will be allowed.
Style 905 Pipe is supplied in random mill lengths (RML) (17 – 24 ft) that measures 21 ft. (nominal). Order quanti-
ties will be accepted only in 21 ft. random length increments, subject to industry standard
Vic-Press 304 Pipe
±10% tolerance. Minimum footage requirements must be specified on the order when required.
NOTE: Pressfit pipe is non-cancellable and non-returnable.
T- _ _ _ -905-X-0- _ _
Style 905 – Vic-Press 304 Schedule 5S Pipe
Request publication 18.02.
Aprx.
Pipe Inches Pipe Weight Price
Nominal Size Outside Diameter Wall Thickness Per Ft. Per 100 Feet
Z\x 0.840 0.065 0.60 $850.00
C\v 1.050 0.065 0.70 950.00
1 1.315 0.065 0.90 1100.00
1Z\x 1.900 0.065 1.30 1400.00
2 2.375 0.065 1.60 1650.00
Pressfit Tools The Pressfit System requires a Pressfit Tool specifically designed for Pressfit products on approved
Schedule 5 pipe. Refer to Section 13 – Pipe Preparation Tools for monthly rental rates and where to call
for purchase information.
NOTE: Victaulic Tool Discount will apply.
stainless steel pipe provides a fast. easy. clean. reliable means for joining Z\x–2”/15 –
50 mm stainless steel pipe. Victaulic Type 316 stainless steel pipe is 0.065”/1.6 mm
wall thickness and meets the requirements of ASTM A-312. Grade 316/316L (TP316
UNS. designation S31600). Only approved Vic-Press 316/316L pipe can be used
section 6
COLOR
GRADE TEMP. RANGE COMPOUND CODE * GENERAL SERVICE RECOMMENDATIONS
STANDARD O-RING
E
Recommended for hot water service within the specified tem-
Green perature range plus a variety of dilute acids, oil-free air and many
–30°F to +230°F EPDM Stripe chemical services. Not recommended for petroleum services. Not
recommended for steam services.
AVAILABLE O-RING
T
Recommended for petroleum products, air with oil vapors, veg-
Orange etable and mineral oils within the specified temperature range. Not
–20°F to +180°F Nitrile Stripe recommended for hot water services over +150°F/+66°C steam, or for
hot dry air over +140°F/+60°C.
OPTIONAL O-RING – Contact Victaulic for delivery time
O
Recommended for many oxidizing acids. petroleum oils, haloge-
Fluoro- Blue nated hydrocarbons, lubricants, hydraulic fluids, organic liquids
+20°F to +300°F elastomer Stripe and air with hydrocarbons to +300°F/+149°C. Not recommended for
steam services.
* Pressfit stainless steel products must only be used on services compatible with o-ring and fitting materials. Incompatible
services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the
Victaulic Gasket Selection Guide (05.01) for specific recommendations.
WARNING
• Before attempting to install any Pressfit system products, carefully read and
fully understand the “Pressfit Products Installation Instructions” (I-500) and the
operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property
damage, product damage, joint leakage, and/or joint failure.
section 6
2 11.00 47.00
Style 507 Style 507 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Standard Coupling W/Standard W/Optional
O-Ring O-Ring
(P X P) Inches Lbs Grade “E” or “T” Grade “O” *
Style 508 Style 508 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Slip Coupling W/Standard W/Optional
O-Ring Grade O-Ring
(P X P) Inches Lbs “E” or “T” Grade “O” *
Style 576 Style 576 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
pressfit system for type 316 ss pipe
1 0.39 85.00 +
1 x C\v 0.35 87.00 95.50
1 0.40 87.00 95.50
1Z\x x C\v 0.60 160.00 181.50
1Z\x 0.66 181.50 198.00
2 x 2 1.00 235.50 258.50
Series 569 Series 569 – Plain End, Grooved Ends, or Plain End X Grooved
Aprx.
Nominal Size Weight Each End to End Price Each *
Stainless Steel Ball Valve Plain End X
with Locking Handle Plain End Grooved Ends Grooved
Inches Lbs Inches (T X T) (G X G) (T X G)
Nominal
Size Price Each
Repair Kits Type 316
Stainless
K- _ _ _ -569-0-0 _ -1 Inches Repair Kit Steel Ball Stem
Style 570 Style 570 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
section 6
1Z\x 1.38 200.50 236.50
2 2.30 275.50 325.00
Style 568 Style 568 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
90° Elbow – Short Tangent W/Standard W/Optional
O-Ring O-Ring
(P X P) Inches Lbs Grade “E” or “T” Grade “O” *
Style 571 Style 571 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
45° Elbow W/Standard W/Optional
O-Ring O-Ring
(P X P) Inches Lbs Grade “E” or “T” Grade “O” *
Style 572 Style 572 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
pressfit system for type 316 ss pipe
Style 573 Style 573 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Tee – Reducing Branch W/Standard W/Optional
O-Ring O-Ring
(P X P X P) Inches Lbs Grade “E” or “T” Grade “O” *
Nominal Aprx.
Size Weight Each
Concentric Reducer Inches Lbs Price Each
C\v x Z\x 0.20 $136.00
(T X T) 1 x Z\x 0.22 173.50
F- _ _ _ -574-X-2-T C\v 0.24 128.00
Request publication 18.01. 1Z\x x Z\x 0.34 257.50
C\v 0.36 169.00
1 0.39 118.50
2 x Z\x 0.59 446.00
C\v 0.61 194.50
1 0.61 145.50
1Z\x 0.68 145.50
Style 575 Style 575 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
section 6
1Z\x 4.5 674.00 690.00
2 5.3 749.00 772.50
Nominal Aprx.
Size Weight Each
Adapter Nipple Inches Lbs Price Each
C\v 0.19 $99.00
(G X T) 1 0.26 102.50
F- _ _ _ -577-X-2-T 1Z\x 0.36 128.50
Request publication 18.01. 2 0.46 134.00
Style 578 Style 578 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Tee – Reducing Branch W/Standard W/Optional
Threaded O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
Style 585 Style 585 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
pressfit system for type 316 ss pipe
Style 566 Style 566 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Flange Adapter W/Standard W/Optional
(Van Stone type) O-Ring O-Ring
Inches Lbs Grade “E” or “T” Grade “O” *
Style 579 Style 579 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Nominal Aprx.
Size Weight Each Price Each †
Female Adapter – Threaded W/Standard W/Optional
O-Ring O-Ring
(P X F) Inches Lbs Grade “E” or “T” Grade “O” *
Style 583 Style 583 – With Standard O-Ring Grade “E” or “T” or With Optional O-Ring Grade “O”
Aprx.
Nominal Weight
section 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Contact Victaulic for delivery time.
† Specify choice of o-ring clearly on order.
Vic-Press 316 Pipe For Type 316/316L Schedule 5S stainless steel pipe approved for use with the Victaulic Vic-Press 316
System for stainless steel pipe, contact Victaulic or your nearest Vic-Press 316 Stainless Steel distributor.
Approved pipe meets the requirements of ASTM A-312, Grade 316/316L and carries the label,
“Vic-Press 316™ Pipe. Certified for use with Vic-Press 316 Products.”
The Pressfit Stainless System requires no special preparation of the pipe ends before assembly. Pipe must
be square cut (±0.030”) and deburred to prevent damage to the o-ring during assembly.
Pressfit Stainless System products are designed only for use on approved stainless steel pipe.
Terms on Vic-Press 316 pipe are Z\x% 10 net 30 days FOB shipping point (our option) freight prepaid and
charged.
Vic-Press 316 pipe sales may not be combined with Vic-Press 316 fittings or any other Victaulic products
for any special terms, conditions or allowances. No returns of Vic-Press 316 pipe will be allowed.
Style 905 Pipe is supplied in random mill lengths (RML) (17 – 24 ft) that measure 21 ft. (nominal). Order quantities
will be accepted only in 21 ft. random length increments, subject to industry standard ±10%
Vic-Press 316 Pipe
tolerance. Minimum footage requirements must be specified on the order when required.
NOTE: Pressfit pipe is non-cancellable and non-returnable.
T- _ _ _ -905-X-00
Style 905 - Vic-Press 316 Schedule 5S Pipe
Request publication 18.01.
Aprx.
Pipe Pipe Weight
Inches Per Ft. Price
Nominal Size Outside Diameter Wall Thickness Lbs Per 100 Feet
Z\x 0.840 0.065 0.60 $1450.00
C\v 1.050 0.065 0.70 1500.00
1 1.315 0.065 0.90 1700.00
1Z\x 1.900 0.065 1.30 2250.00
2 2.375 0.065 1.60 2750.00
Pressfit Tools The Pressfit System requires a Pressfit Tool specifically designed for Pressfit products on approved
Schedule 5 pipe. Refer to Section 13 – Pipe Preparation Tools for monthly rental rates and where to call
for purchase information.
NOTE: Victaulic Tool Discount will apply.
HDPE
Products
Size
Inches Price Each
2 $68.00
3 68.00
4 68.00
5 71.50
6 71.50
8 71.50
10 74.50
12 +
Grade “E”
EPDM or
(HDPE to steel) PIPE Aprx. COUPLING COMPLETE † Grade “T” Plated
Inches Weight Each With Grade “E” or “T” Gasket Nitrile Bolt & Nut
Style 997
section 7
6 6.625 14.8 666.00 800.50 61.00 B\, x 3Z\v
8 8.625 21.7 766.50 954.50 83.50 B\, x 3Z\x
10 10.750 34.3 1057.50 + 105.00 C\v x 5Z\x
12 12.750 37.5 1209.50 + 122.00 M\, x 5Z\x
Copper Products
COUPLING
Coupling for Copper PIPE
Approximate
Weight
COMPLETE
With
Inches Each “EHP” Gasket SPARE PARTS
Style 607 “EHP”
Nominal Size Lbs Price Each Gasket
Request publication 22.13.
2 1.9 $40.00 $32.50
2Z\x 2.1 45.50 35.50
3 3.0 50.50 37.50
4 3.3 76.50 55.00
5 5.5 129.50 92.00
6 5.8 171.50 120.50
8 7.7 266.00 188.00
4. When mating C.I. flanges to IPS flanges: the flange washer is placed between the two
Vic-Flange adapters. If one flange is not a Vic-Flange adapter (e.g., flanged valve), then
a flanged gasket must be placed adjacent to that flange and the flange washer must be
inserted between the flange gasket and the Vic-Flange adapter.
5. When mating to components (valves, strainer, etc.) where the component flange face
has an insert: follow the same arrangement as in #1 above.
Reducers
No. 650 Concentric Reducer Groove x Groove
Aprx.
Concentric Reducer Nominal Size Weight Each End to End No. 650 Grooved x Grooved
Inches Lbs Inches Price Each
Aprx.
Concentric Reducer Nominal Size Weight Each End to End Cup No. 652 Grooved x Cup
Inches Lbs Inches Inches Price Each
Size Inches Wgt. Lbs Bag Qty. Part Code List Price
Concentric Reducer 2 x 1 0.65 1 FB60653CGP $109.50
1Z\v 0.64 1 FB64653CGP 109.50
No. 653 Grooved x PL
1Z\x 0.72 1 FB67653CGP 109.50
Request publication 22.04.
2Z\x x 1 0.93 1 FC00653CGP 134.50
1Z\v 0.79 1 FC01653CGP 134.50
1Z\x 0.92 1 FC03653CGP 134.50
3 x 1Z\x 0.92 1 FC40653CGP 167.00
Aprx.
Reducing Tee Nominal Size Weight Each No.625 Grooved x Grooved
Inches Lbs Price Each
Dielectric Waterway For CTS to IPS Connections. See Grooved IPS Pipe Fitting Section.
Transition Fittings
section 8
Size Inches Wgt. Lbs Bag Qty. Part Code List Price
Reducing Tee 2 x C\v 0.84 1 FB72627CGP $179.50
1 0.96 1 FB73627CGP 179.50
No. 627 Grooved x PL
1Z\v 1.04 1 FB75627CGP 179.50
Request publication 22.04.
1Z\x 1.14 1 FB76627CGP 179.50
2Z\x x C\v 1.26 1 FC14627CGP 229.00
1 1.32 1 FC15627CGP 223.50
1Z\v 1.42 1 FC16627CGP 223.50
1Z\x 1.59 1 FC17627CGP 223.50
3 x C\v 1.54 1 FC60627CGP 381.50
1 1.60 1 FC62627CGP 381.50
1Z\v 1.93 1 FC63627CGP 381.50
1Z\x 2.01 1 FC64627CGP 381.50
4 x C\v 2.95 1 FD66627CGP 489.50
1 3.01 1 FD67627CGP 592.00
1Z\v 3.22 1 FD69627CGP 592.00
1Z\x 3.43 1 FD72627CGP 592.00
Copper Connection Series 608 – Bare Valve, Two Position Detent, Lever Operator, or Gear Operator
Copper Size Bare Valve Two Position Detent Lever Operator Gear Operator
Butterfly Valves Actual Size
Inches Code (3622-00) † (362-15) † (3622-11) † (3622-20) †
Series 608 2Z\x 024 $607.50 $671.00 $748.00 $1225.00
3 030 680.00 796.00 821.50 1297.50
EPDM (Grade E) Disc 4 040 899.50 N/A 1039.50 1516.50
(Fig. V - _ _ _ -362 _ - _ _) 5 050 1181.00 N/A 1322.00 1797.50
Cast Bronze Body 6 060 1272.00 N/A 1413.00 1889.50
Request publication 22.05.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† See valve numbering chart for reference.
Bracket Insulation
Copper Size [mm]
When ordered separately from Actual Size
the valve, these items are Inches Code (3_ _3 -_ _) †
provided as a kit. 2Z\x 024 $77.50
3 030 77.50
4 040 80.00
5 050 80.00
6 060 98.00
Handwheel
Operators Valve Size
Inches
Diameter
Inches Price Each
1Z\x - 4 4 $36.50
Fits Vic-300 MasterSeal,
5–6 5 73.50
Series 700, 726 and 608 Gear
Operators NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
V - 040 - 3 6 6 6 - 11
Size Pressure
Type In./mm Code Rating Body Disc/Trim Bracket Operator
V 2½/63.5 024 3 - 300 psi 6 - Bronze (w/copper 1 - Buna/Bronze-“T” 0 - No Bracket (2) 00 -Bare
3/76.1 030 connection 2 - EPDM/Bronze-“E” 2 - Standard 11 - Lever handle with memory stop
4/101.6 040 grooves) 3 - Standard with 15 - 2 position detent handle
5/127.0 050 9 - Special* Insulation (sizes 2½ & 3"/63.5 & 76.1 mm only)
6/152.4 060 9 - Special* 20 - Gear Operator
9 - Special* 21 - Gear Operator with memory stop
22 - Gear Operator with chainwheel
23 - Gear Operator with AWWA square
oper. nut
24 - Gear Operator with memory stop
and chainwheel
29 - Non-std. gear operator*
LD - 10 position handle with tamper-
proof locking device
copper connection for grooved copper tubing
NOTES:
(2) Used with 2 position detent handle only
* Details required
section 8
PermaLynx
System Products
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Coupling Z\x 0.04 10 20-001-10 Y004600CEP $5.50
C\v 0.09 10 20-001-20 Y006600CEP 6.50
PL x PL (WROT)
1 0.16 5 20-001-30 Y010600CEP 10.50
Request publication 22.20 13.00
1Z\v 0.21 1 20-001-40 Y012600CEP
1Z\x 0.30 1 20-001-50 Y014600CEP 18.00
section 9
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Coupling (R) C\v x Z\x 0.08 10 20-001-21 YU67600CEP $12.00
1 x Z\x 0.13 1 20-001-32 YK26600CEP 13.00
PL x PL (WROT)
C\v 0.14 5 20-001-31 YA83600CEP 13.00
Request publication 22.20
1Z\v x C\v 0.23 1 20-001-42 YB04600CEP 14.00
1 0.21 1 20-001-41 YB05600CEP 19.00
1Z\x x 1 0.28 1 20-001-52 YB29600CEP 17.50
1Z\v 0.30 1 20-001-51 YB31600CEP 18.00
Size Inches Wgt. Lbs Bag Qty. Part Code List Price
Concentric Reducer 2 x 1 0.65 1 FB60653CGP $109.50
1Z\v 0.64 1 FB64653CGP 109.50
No. 653 Grooved x PL
1Z\x 0.72 1 FB67653CGP 109.50
Request publication 22.04.
2Z\x x 1 0.93 1 FC00653CGP 134.50
1Z\v 0.79 1 FC01653CGP 134.50
1Z\x 0.92 1 FC03653CGP 134.50
3 x 1Z\x 0.92 1 FC40653CGP 167.00
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Fitting Coupling (R) Z\x x C\v 0.06 10 20-024-11 YX87600CET $6.50
1 0.09 5 20-024-13 YK02600CET 7.50
PL x FTG (WROT)
C\v x 1 0.11 10 20-024-26 YA61600CET 8.00
Request publication 22.20
section 9
PL606-2 45° Fitting Elbow
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
45° Fitting Elbow Z\x 0.04 10 20-027-10 Y004606CET $4.50
C\v 0.11 10 20-027-20 Y006606CET 6.00
PL x FTG (WROT)
1 0.18 5 20-027-30 Y010606CET 8.00
Request publication 22.20 15.50
1Z\v 0.27 1 20-027-40 Y012606CET
1Z\x 0.38 1 20-027-50 Y014606CET 17.50
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Elbow Z\x 0.05 10 20-005-10 Y004607CES $5.50
C\v 0.12 10 20-005-20 Y006607CES 7.00
PL x PL (WROT)
1 0.22 5 20-005-30 Y010607CES 12.00
Request publication 22.20 19.50
1Z\v 0.37 1 20-005-40 Y012607CES
1Z\x 0.55 1 20-005-50 Y014607CES 36.00
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Elbow – Long Z\x 0.09 5 20-029-10 Y004607CEL $12.00
Radius C\v 0.18 10 20-029-20 Y006607CEL 13.00
1 0.32 5 20-029-30 Y010607CEL 16.50
PL x PL (WROT) 1Z\v 0.48 1 20-029-40 Y012607CEL 19.50
Request publication 22.20 1Z\x 0.73 1 20-029-50 Y014607CEL 26.00
section 9
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Elbow – Short C\v x Z\x 0.12 10 20-005-21 YU67607CEP $10.00
Radius (R)
PL x PL (WROT)
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Fitting Elbow – Z\x 0.05 10 20-028-10 Y004607CET $5.00
Short Radius C\v 0.11 10 20-028-20 Y006607CET 6.50
1 0.20 5 20-028-30 Y010607CET 9.00
PL x FTG (WROT) 1Z\v 0.34 1 20-028-40 Y012607CET 12.00
Request publication 22.20 1Z\x 0.49 1 20-028-50 Y014607CET 18.50
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Tee Z\x 0.09 10 20-006-10 Y004611CEP $8.00
C\v 0.20 10 20-006-20 Y006611CEP 10.00
PL x PL x PL (WROT)
1 0.36 5 20-006-30 Y010611CEP 17.50
Request publication 22.20 23.50
1Z\v 0.54 1 20-006-40 Y012611CEP
1Z\x 0.78 1 20-006-50 Y014611CEP 43.00
section 9
PL611BH Bullhead Tee
Size Inches Wgt Lbs Bag Qty. Product # Part Code List Price
Bullhead Tee Z\x x Z\x x C\v 0.12 10 20-006-12 YAK9611CEP $14.50
C\v x C\v x 1 0.24 5 20-006-22 YA60611CEP 22.00
PL x PL x PL (WROT)
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Tee (R) C\v x C\v x Z\x 0.16 10 20-006-23 YT13611CEP $12.50
1 x 1 x Z\x 0.30 5 20-006-34 YK46611CEP 15.00
PL x PL x PL (WROT)
C\v 0.34 5 20-006-33 YA84611CEP 16.00
Request publication 22.20
1Z\v x 1Z\v x Z\x 0.40 1 20-006-45 YB09611CEP 20.50
C\v 0.43 1 20-006-44 YB10611CEP 21.50
1 0.44 1 20-006-43 YB11611CEP 24.00
1Z\x x 1Z\x x Z\x 0.47 1 20-006-56 YS31611CEP 37.50
C\v 0.55 1 20-006-55 YB36611CEP 38.50
1 0.63 1 20-006-54 YB37611CEP 38.50
1Z\v 0.75 1 20-006-53 YB39611CEP 40.00
Size Inches Wgt. Lbs Bag Qty. Part Code List Price
Reducing Tee 2 x C\v 0.84 1 FB72627CGP $179.50
1 0.96 1 FB73627CGP 179.50
No. 627 Grooved x PL
1Z\v 1.04 1 FB75627CGP 179.50
Request publication 22.04.
1Z\x 1.14 1 FB76627CGP 179.50
2Z\x x C\v 1.26 1 FC14627CGP 229.00
1 223.50
section 9
1.32 1 FC15627CGP
1Z\v 1.42 1 FC16627CGP 223.50
1Z\x 1.59 1 FC17627CGP 223.50
3 x C\v 1.54 1 FC60627CGP 381.50
1 1.60 1 FC62627CGP 381.50
1Z\v 1.93 1 FC63627CGP 381.50
1Z\x 2.01 1 FC64627CGP 381.50
4 x C\v 2.95 1 FD66627CGP 489.50
1 3.01 1 FD67627CGP 592.50
1Z\v 3.22 1 FD69627CGP 592.00
1Z\x 3.43 1 FD72627CGP 592.00
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Tee (RR) C\v x Z\x x Z\x 0.15 10 20-006-25 YAL0611CEP $11.50
C\v 0.20 10 20-006-24 YY14611CEP 12.00
PL x PL x PL (WROT)
Request publication 22.20
PL617 Cap
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Cap Z\x 0.03 10 20-007-10 Y004617CE0 $5.50
C\v 0.06 10 20-007-20 Y006617CEO 9.00
PL (WROT)
1 0.10 5 20-007-30 Y010617CEO 13.00
Request publication 22.20 15.50
1Z\v 0.13 1 20-007-40 Y012617CEO
1Z\x 0.20 1 20-007-50 Y014617CEO 22.00
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Drop Elbow Z\x 0.19 5 21-031-10 Y004707CEP $16.50
PL x PL (CAST)
Request publication 22.20
section 9
PL707-5S 90° Drop Elbow Stubout
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Drop Elbow Z\x 0.31 5 21-033-10 Y004707DES $19.50
Stubout
PL x Stub (CAST)
Request publication 22.20
PL733 Union
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Union Z\x 0.27 5 21-012-10 Y004733CEP $36.00
C\v 0.42 5 21-012-20 Y006733CEP 46.00
PL x PL (CAST)
1 0.71 5 21-012-30 Y010733CEP 48.50
Request publication 22.20 56.50
1Z\v 0.98 1 21-012-40 Y012733CEP
1Z\x 1.35 1 21-012-50 Y014733CEP 76.50
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Coupling Z\x 0.11 10 20-002-10 Y004603CEF $8.00
C\v 0.23 10 20-002-20 Y006603CEF 9.00
PL x F (WROT)
1 0.37 5 20-002-30 Y010603CEF 14.00
Request publication 22.20 24.50
1Z\v 0.55 1 20-002-40 Y012603CEF
1Z\x 0.72 1 20-002-50 Y014603CEF 35.50
section 9
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Coupling (R) Z\x x C\v 0.18 5 20-002-11 YX87603CEF $9.50
C\v x Z\x 0.20 10 20-002-21 YU67603CEF 9.00
PL x F (WROT)
1 x C\v 0.34 1 20-002-31 YA83603CEF 19.50
Request publication 22.20
PL604 Coupling
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Coupling Z\x 0.11 10 20-003-10 Y004604CEM $6.00
C\v 0.23 10 20-003-20 Y006604CEM 9.00
PL x M (WROT)
1 0.36 5 20-003-30 Y010604CEM 12.50
Request publication 22.20 22.00
1Z\v 0.56 1 20-003-40 Y012604CEM
1Z\x 0.73 1 20-003-50 Y014604CEM 30.50
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Coupling (R) Z\x x C\v 0.17 10 20-003-11 YX87604CEM $7.50
C\v x Z\x 0.19 10 20-003-21 YU67604CEM 9.50
PL x M (WROT)
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Elbow Z\x 0.18 5 21-008-10 Y004707CEF $13.00
C\v 0.33 5 21-008-20 Y006707CEF 15.00
PL x F (CAST)
1 0.61 1 21-008-30 Y010707CEF 21.50
Request publication 22.20
section 9
PL707-3-5 90° Drop Elbow
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Drop Elbow Z\x 0.21 5 21-009-10 Y004707DEF $14.00
C\v 0.39 5 21-009-20 Y006707DEF 24.50
PL x F (CAST)
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
90° Elbow Z\x 0.18 5 21-010-10 Y004707CEM $14.00
C\v 0.34 5 21-010-20 Y006707CEM 21.50
PL x M (CAST)
1 0.58 1 21-010-30 Y010707CEM 32.00
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Tee Z\x 0.22 5 21-011-10 Y004712CEF $16.00
C\v 0.51 5 21-011-20 Y006712CEF 20.00
PL x PL x F (CAST)
1 0.84 1 21-011-30 Y010712CEF 28.00
Request publication 22.20
section 9
PL733-3 Union
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Union Z\x 0.31 5 21-016-10 Y004733CEF $25.50
C\v 0.52 5 21-016-20 Y006733CEF 37.00
PL x F (CAST)
1 0.76 1 21-016-30 Y010733CEF 43.00
Request publication 22.20
PL733-4 Union
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Union Z\x 0.32 5 21-018-10 Y004733CEM $23.50
C\v 0.53 5 21-018-20 Y006733CEM 29.00
PL x M (CAST)
1 0.83 1 21-018-30 Y010733CEM 33.50
Request publication 22.20
PL771 Flange
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Flange 1 1.75 1 21-030-30 Y010771CEO $39.50
1Z\v 2.10 1 21-030-40 Y012771CEO 46.00
PL x Flange (CAST)
1Z\x 2.88 1 21-030-50 Y014771CEO 47.00
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Ball Valve – Standard Z\x 0.53 1 25-310-10 Y004300CEL $28.50
Lever Handle C\v 0.92 1 25-310-20 Y006300CEL 34.00
1 1.44 1 25-310-30 Y010300CEL 46.50
PL x PL 1Z\v 2.09 1 25-310-40 Y012300CEL 73.50
Request publication 22.20 1Z\x 3.29 1 25-310-50 Y014300CEL 86.00
section 9
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Check Valve Z\x 0.97 1 25-204-10 Y004510CEP $56.50
C\v 1.39 1 25-204-20 Y006510CEP 59.50
PL x PL
1 2.27 1 25-204-30 Y010510CEP 85.00
Request publication 22.20 107.50
1Z\v 3.20 1 25-204-40 Y012510CEP
1Z\x 4.55 1 25-204-50 Y014510CEP 122.00
Size Inches Wgt. Lbs Bag. Qty. Product # Part Code List Price
Supply Stop Valve Z\x x C\, x 4 0.31 1 25-100-10 Y004712CES $22.00
(Straight) – Quarter
Turn Handle
PL x Compression
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Supply Stop Valve Z\x x C\, x 4 0.33 1 25-190-10 Y004712CEA $22.00
(Angled) – Quarter
Turn Handle
PL x Compression
section 9
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Power Drive Small Z\x– 1 0.53 1 22-414-40 Y000414SML $115.50
Chamfer & Deburr
Tool
Z\x x 1”
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Power Drive Large Z\x– 1Z\x 1.07 1 22-414-60 Y000414LGE
Chamfer & Deburr $129.00
Tool
Z\x x 1Z\x”
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Drill Compatible Small Z\x– 1 0.534 1 22-414-70 Y000414SMX $100.50
Chamfer & Deburr
Tool
Z\x x 1”
section 9
Request publication 22.20
Size Inches Wgt. Lbs Bag Qty. Product # Part Code List Price
Drill Compatible Large 1Z\v– 1Z\x 1.07 1 22-414-80 Y000414LGX $167.00
Chamfer & Deburr
Tool
1Z\v x 1Z\x”
Request publication 22.20
Aluminum
Products
Style 77A
products for grooved aluminum pipe
Style 78A
section 10
Aluminum Fittings
Stainless Steel
Products
PIPE Aprx.
Inches Wgt. Ea. Price Each PLATED BOLT & NUT
Style 89 COUPLING
Request publication 17.24. COUPLING COMPLETE †
COMPLETE † Galvanized
Galvanized With
With Grade “E” or “T”
Nominal Outside Grade “E” or “T” FlushSeal Size §
Size Dia. Lbs Gasket Gasket No. Inches
2 2.375 3.3 $51.50 $71.50 2 B\, x 2C\v
2Z\x 2.875 4.0 61.00 86.50 2 B\, x 3Z\x
3 3.500 4.6 68.50 91.50 2 B\, x 3Z\x
4 4.500 8.2 95.50 130.00 2 C\v x 4Z\v
5 6.625 16.0 164.50 241.50 2 M\, x 5Z\x
6 6.625 16.0 164.50 241.50 2 M\, x 5Z\x
8 8.625 26.3 264.50 328.50 2 1 x 5Z\x
10 10.750 32.8 465.00 547.50 2 1 x 6Z\x
12 12.750 42.1 540.50 642.50 2 1 x 6Z\x
Rigid Coupling AGS Style W89 – Grade “E” or “T” FlushSeal Gasket
PIPE Aprx.
Inches Wgt.Ea. Price Each PLATED BOLT & NUT
(For Stainless Steel Pipe) COUPLING COUPLING
COMPLETE † COMPLETE †
Style W89 Galvanized Galvanized
Request publication 20.15. With With
Grade “E” or “T” Grade “L”
Nominal Outside FlushSeal FlushSeal Size §
Size Dia. Lbs Gasket Gasket No. Inches
14 14.000 69.0 $678.00 $1522.00 2 1Z\, x 5Z\x
16 16.000 83.0 884.50 1740.50 2 1Z\, x 5Z\x
18 18.000 95.0 1023.00 1879.00 2 1Z\, x 5Z\x
20 20.000 110.0 1216.00 2034.50 2 1Z\, x 5Z\x
24 24.000 190.0 1796.00 2465.50 2 1Z\, x 5Z\x
Purchase
Tool Part Pipe Size List Price
Model Number Range Each Set *
VE416FS
VE416FSD RWX1416016 14 - 16” $3002.50
VE414MC
VE436MC RWX1436024 14 - 24” 2873.00
* Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.
6 – 12”
Flexible Coupling Style 475 – Grade “EW” or “T” Gasket or FlushSeal Gasket
Flexible Coupling Style 77-S – Grade “EW” or “T” Gasket or FlushSeal Gasket
Aprx.
Vic-Flange Adapter PIPE
Inches
Weight Each
Lbs Price Each
2 3.0 $193.00
Style 441
2Z\x 4.3 232.50
Request publication 17.27.
3 4.8 256.00
4 6.9 336.50
6 9.5 424.00
Aprx.
Adapter Nominal Size
Inches
Weight Each
Lbs
End to End
Inches
Price Each
Type 304L
Price Each
Type 316L
6 20.1 6.0 + +
No. 45S
8 31.1 6.0 + +
10 44.6 8.0 + +
12 66.0 8.0 + +
section 11
Standard Schedule 10S, Type 304L and Type 316L Stainless Steel Fittings
Stainless steel fittings are globally sourced. For domestically manufactured fittings, contact Victaulic for pricing and delivery.
Nominal Aprx.
Elbows Size Style Weight Each Center to End Price Each
Inches Number Lbs Inches Type 304L Type 316L
Request publication 17.16.
1 No. 410-SS 0.8 2.88 N/A $109.50
1Z\v No. 410-SS 1.0 3.13 N/A 111.00
1Z\x No. 410-SS 1.3 3.50 N/A 111.50
2 No. 410-SS 2.2 4.50 N/A 125.00
2Z\x No. 410-SS 3.3 5.00 N/A 170.00
3 No. 410-SS 2.6 4.50 $164.00 203.50
4 No. 410-SS 4.4 6.00 234.00 291.50
No. 410-SS
6 No. 410-SS 11.0 9.00 618.50 771.50
8 No. 410-SS 21.2 12.00 1075.00 1342.00
10 No. 410-SS 36.6 15.00 2122.50 2652.50
12 No. 410-SS 56.9 18.00 3327.00 4157.50
Nominal Aprx.
Elbows Size Style Weight Each Center to End Price Each
Inches Number Lbs Inches Type 304L Type 316L
Request publication 17.16.
1 No. 411-SS 0.7 2.00 N/A $99.00
1Z\v No. 411-SS 0.7 2.00 N/A 100.00
1Z\x No. 411-SS 1.0 2.19 N/A 101.50
2 No. 411-SS 1.6 2.75 N/A 111.50
2Z\x No. 411-SS 2.1 2.81 N/A 147.50
3 No. 411-SS 1.3 2.00 $151.00 187.50
No. 411-SS
4 No. 411-SS 2.2 2.50 216.00 269.00
6 No. 411-SS 5.5 3.75 408.50 510.00
8 No. 411-SS 11.0 5.00 698.00 873.00
10 No. 411-SS 18.5 6.25 1634.00 1910.50
12 No. 411-SS 28.4 7.50 2255.00 2819.00
Tees Tees
Nominal Aprx.
Size Style Weight Each Center to End Price Each
Segmentally welded – not a CR Inches Number Lbs Inches Type 304L Type 316L
class fitting) 1 No.20-SS 1.2 2.25 $327.50 $341.00
Request publication 17.16. 1Z\v No.20-SS 1.6 3.38 384.50 +
1Z\x No. 420-SS 2.1 3.38 N/A 319.50
2 No. 420-SS 2.2 2.75 N/A 333.50
2Z\x No. 420-SS 3.3 3.07 N/A 406.50
3 No. 420-SS 3.1 3.77 422.00 527.00
No. 420-SS & No. 20-SS 4 No. 420-SS 4.9 4.47 451.00 564.50
6 No. 420-SS 11.7 5.91 879.00 1232.50
8 No. 420-SS 20.3 7.79 1298.00 2292.00
10 No. 420-SS 34.4 8.89 2539.00 5856.00
12 No. 420-SS 52.5 10.39 3826.00 7465.00
Nominal Aprx.
Size Style Weight Each End to End Price Each
Schedule 10S 304/316 Inches Number Lbs Inches Type 304L Type 316L
For No. 50-SSLT request 1Z\x x C\v No. 50-SSLT 1.3 3.75 $262.00 $562.50
publication 17.04. 1 No. 50-SSLT 1.4 3.75 203.00 237.00
For No. 450-SS request 1Z\v No. 50-SSLT 1.5 3.75 226.00 246.50
publication 17.16. 2 x C\v No. 50-SSLT 2.0 3.75 299.00 416.50
1 No. 50-SSLT 2.1 3.75 164.50 194.50
1Z\v No. 50-SSLT 2.3 3.75 458.00 579.00
1Z\x No. 450-SS 2.5 5.00 N/A 224.00
No. 50-SSLT & No. 450-SS 2Z\x x 1 No. 50-SSLT 2.8 5.00 598.00 693.00
1Z\x No. 50-SSLT 3.0 5.00 442.50 474.00
2 No. 450-SS 1.1 5.00 N/A 280.50
3 x 1 No. 50-SSLT 4.0 5.00 472.00 616.00
1Z\v No. 50-SSLT 4.1 5.00 679.00 +
1Z\x No. 50-SSLT 4.2 5.00 462.00 551.00
2 No. 50-SSLT 4.3 5.00 147.00 217.00
2Z\x No. 450-SS 1.5 5.00 120.00 149.50
4 x 2 No. 50-SSLT 4.8 5.00 196.00 343.00
2Z\x No. 50-SSLT 5.8 5.00 269.00 506.00
3 No. 450-SS 2.0 5.00 139.00 173.50
6 x 2Z\x No. 50-SSLT 6.8 15.00 2262.00 2860.00
3 No. 450-SS 6.9 5.50 451.00 563.00
products for grooved stainless steel pipe
Nominal Aprx.
Size Style Weight Each End to End Price Each
Schedule 10S 304/316 * Inches Number Lbs Inches Type 304L Type 316L
Request publication 17.04. 1Z\x x C\v No. 51-SSLT 1.3 3.75 $1080.00 +
1 No. 51-SSLT 1.4 3.75 444.50 $511.50
2 x 1 No. 51-SSLT 2.1 3.75 803.50 891.00
1Z\v No. 51-SSLT 2.3 3.75 958.50 1023.00
No. 51-SSLT
1Z\x No. 51-SSLT 2.5 3.75 505.00 579.00
2Z\x x 2 No. 51-SSLT 3.5 5.00 614.50 750.00
3 x 2 No. 51-SSLT 4.3 5.00 621.50 677.00
2Z\x No. 51-SSLT 4.5 5.00 632.00 726.00
4 x 2 No. 51-SSLT 4.8 5.00 1665.00 +
2Z\x No. 51-SSLT 5.8 5.00 775.50 1317.50
3 No. 51-SSLT 5.9 5.00 1292.00 1613.00
6 x 4 No. 51-SSLT 7.0 9.00 1363.00 1995.00
8 x 4 (sw) No. 51-SSLT 6.5 12.00 3932.00 6104.00
6 No. 51-SSLT 7.0 8.00 1883.50 1898.50
10 x 6 (sw) No. 51-SSLT 18.0 13.00 5217.00 7768.00
8 (sw) No. 51-SSLT 19.6 13.00 4468.50 6922.50
12 x 8 (sw) No. 51-SSLT 26.4 14.00 7127.00 9023.50
10 (sw) No. 51-SSLT 28.4 14.00 6090.50 7933.00
Cap Cap
Nominal
Size No. 60-SS No. 460-SS
Type 304/316 Type 304L Type 316L Type 316L
Request publication 17.04. Aprx. Aprx. Aprx.
Weight Thickness Weight Thickness Weight Thickness
Each “T” Price Each “T” Price Each “T” Price
Inches Lbs Inches Each Lbs Inches Each Lbs Inches Each
0.2 0.813 $134.50 0.1 1.00 $155.00 – – –
products for grooved stainless steel pipe
C\v
No. 60-SS Flat 1 0.3 0.875 134.50 0.3 1.00 155.00 – – –
1Z\v 0.4 0.875 143.00 0.4 1.00 164.50 – – –
1Z\x 0.5 0.875 149.00 0.5 1.00 171.50 – – –
2 1.3 0.875 205.00 0.7 1.00 236.00 – – –
2Z\x 1.0 0.875 214.00 1.0 1.00 245.00 – – –
3 2.0 0.875 384.00 – – + 1.16 1.03 $297.00
section 11
2” 2Z\x” 3” 4” 6” 8” 10”
BARE VALVES (020) (024) (030) (040) (060) (080) (100)
V - XXX - 3 - 3 - 3 - Y - ZZ $1515.00 $1551.00 $1779.50 $2031.00 $3140.50 $4172.50 $6913.50
Series 763
with Gear SEAT OPTION ADDER (Y)
Operator 1 - EPDM (E) STD STD STD STD STD STD STD
2 - Nitrile (T) STD STD STD STD STD STD STD
3 - Fluoroelastomer (O) POA POA POA POA POA POA POA
D - Lubricated Nitrile (E) POA POA POA POA POA POA POA
VALVE WITH OPERATOR (ZZ) (E & T - For valve with Grade “O” and Grade “D” please add seat option pricing)
DUCTILE LEVER OPERATOR
03 - Lever Lock - 10 Position $1473.50 $1687.50 $1916.00 $2167.00 $3290.00 $4718.00 N/A
ALUMINUM GEAR OPERATOR
20 - Gear Operator $1703.00 $1918.00 $2147.00 $2469.50 $3727.00 $5177.00 $8220.00
21 - Gear Op. with Memory Stop POA POA POA $2599.00 POA $5366.50 POA
STAINLESS STEEL LEVER OPERATOR
53 - SS Lever Lock - 10 Position POA POA POA POA POA POA POA
Series 763 54 - SS Lever Lock - Tamper Resistant POA POA POA POA POA POA POA
with Lever STAINLESS STEEL GEAR OPERATOR
Lock 10
Position 60 SS Gear Op. $1921.50 $3692.00 $2364.50 $2878.00 $4209.50 $5637.50 POA
Handle
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
POA - Priced on application.
N/A - Not available.
V - 040 - 3 3 3 1 - 03
NOTES:
* Details required with order
† For air and gas service only.
Valve Complete
Valves With
Tamper Resistant
Valve Complete
With
Nominal Size Weight Each Lock/Seal Option Gear Operator *
Series 726-S Inches Lbs 1226-15 1226-20
Request publication 17.22. 1Z\x 4.7 $672.00 $1278.50
2 7.5 790.50 1550.00
2Z\x 11.5 1371.50 2090.00
3 17.3 1844.00 2521.00
8226-15 8226-20
4 44.0 2931.50 3739.00
6 82.0 7041.00 7557.00
B - 020 - 1 2 2 6 - 16
Check Valve Series 712-S Swinger check valve is available with Grade “E”, “T” or Fluoroelastomer seat, bumper and bon-
net closure gasket. Specify choice on order. Contact Victaulic for details.
Series 712-S Swinger check valves are supplied with bonnet cap drilled and tapped with Z\,” NPT pipe plug for chemi-
Request publication 17.08. cal injection or other auxillary connections.
Series 712-S – With 316 Stainless Steel Body
Aprx.
Size Weight Each Price Each
Valve Complete
products for grooved stainless steel pipe
Large Diameter
Products
Master Series Fluid/ • Designed to provide fully restrained joints for air and fluid-conveying pipelines.
AirMaster • Shouldered couplings that are designed to operate at design pressures of the system.
• Meet or exceed the performance standards set forth in AWWA C-606.
• OmniFlex
Stainless Steel Bellows-Type Expansion Joints
(can also accommodate lateral movement)
• D-O-L Bolted Split-Sleeve Expansion Couplings
(accommodates expansion/contraction up to 6Z\x”)
• Paragon Expansion Joints
Fabricated Mechanical Expansion Joints
For more information on the above products, contact the Victaulic Customer Care Center:
Phone: 1-800-841-6624
section 12
The joining of pipe with a suitable Victaulic Vic-Ring coupling presents individual considerations that require review by a Victaulic Piping
System expert who is experienced in special pipe joining applications. For more information please contact Victaulic, or refer to Victaulic
Company’s Vic-Ring submittals available at www.victaulic.com.
TO OBTAIN A QUOTE, PLEASE PROVIDE THE INFORMATION REQUESTED BELOW.
CUSTOMER INFORMATION:
DISTRIBUTOR: DISTRIBUTOR CONTACT NAME:
PHONE: FAX:
PROJECT NAME: PROJECT LOCATION:
APPLICATION DATA:
NOMINAL PIPE SIZE: ACTUAL PIPE OD: WALL THICKNESS:
PIPE MATERIAL:
Carbon Steel: Grade __________ Schedule __________ Class __________
CONFIGURATION INFORMATION:
COUPLING:
STYLE:
RINGS:
SIZE (= PIPE O.D.): QTY: (per Joint – pipe to pipe connections require two rings)
LINING OPTION:
UNLINED ABRASION
6287 Rev.A
Rigid Coupling For AGS Style W07 – For AGS Vic-Ring System
COUPLING COUPLING
AGS Vic-Ring System Aprx.
COMPLETE †
With FlushSeal® “E” or
COMPLETE †
With FlushSeal Silicone
PIPE Wgt. Ea “T” Gasket Grade “L” Gasket SPARE PARTS
AGS Style W07 AGS
section 12
Inches Price Each Price Each Vic-Ring Plated Bolt & Nut
Request publication 16.11.
Nom. Outside Size §
Size Dia. Lbs. Painted Galv. Painted Galv. Price Each No. * Inches
14 14.000 48.9 $526.50 $675.50 $1321.00 $1470.00 + 2 1 x 5Z\x
16 16.000 60.8 685.50 875.00 1411.00 1594.50 + 2 1 x 5Z\x
18 18.000 71.2 792.50 1026.50 1551.50 1779.00 + 2 1 x 5Z\x
20 20.000 81.7 1083.00 1357.00 1798.50 2064.50 + 2 1Z\, x 5Z\x
24 24.000 116.2 1388.00 1758.50 1959.50 2318.50 + 2 1Z\, x 5Z\x
26 26.000 205.0 + + + + + 4 1C\, x 6
14 – 24” 28 28.000 220.0 + + + + + 4 1C\, x 6
30 30.000 227.0 + + + + + 4 1Z\v x 7
32 32.000 242.0 + + + + + 4 1Z\v x 7
34 34.000 255.0 + + + + + 4 1Z\v x 7
36 36.000 268.0 + + + + + 4 1Z\v x 7
40 40.000 340.0 + + + + + 4 1Z\x x 7
42 42.000 360.0 + + + + + 4 1Z\x x 7
44 44.000 390.0 + + + + + 4 1Z\x x 7
46 46.000 415.0 + + + + + 4 1Z\x x 7
26 – 48” 48 48.000 425.0 + + + + + 4 1Z\x x 7
Flexible Coupling for AGS Style W77 – For AGS Vic-Ring System
section 12
14.000 47.5 $749.50 $1498.50 + 2 1 x 5Z\x
16 16.000 57.8 711.50 965.50 1435.50 1682.00 + 2 1 x 5Z\x
18 18.000 65.0 833.00 1155.00 1638.50 1904.50 + 2 1 x 5Z\x
20 20.000 82.3 1112.00 1492.00 1882.00 2262.50 + 2 1Z\, x 5Z\x
24 24.000 106.8 1435.50 1927.50 2104.00 2557.50 + 2 1Z\, x 5Z\x
26 26.000 205.0 + + + + + 4 1Z\, x 6
28 28.000 220.0 + + + + + 4 1Z\, x 6
14 – 24”
30 30.000 227.0 + + + + + 4 1Z\v x 7
32 32.000 242.0 + + + + + 4 1Z\v x 7
34 34.000 255.0 + + + + + 4 1Z\v x 7
36 36.000 268.0 + + + + + 4 1Z\v x 7
40 40.000 340.0 + + + + + 4 1Z\x x 7
42 42.000 360.0 + + + + + 4 1Z\x x 7
44 44.000 390.0 + + + + + 4 1Z\x x 7
46 46.000 415.0 + + + + + 4 1Z\x x 7
48 48.000 425.0 + + + + + 4 1Z\x x 7
26 – 60” 54 54.000 648.0 + + + + + 4 1Z\x x 7
56 56.000 676.0 + + + + + 4 1Z\x x 7
60 60.000 720.0 + + + + + 4 1Z\x x 7
Style 31 Couplings Style 41 Couplings
With Type “D” & ”E” Vic-Ring Adapters With Type “D” & ”E” Vic-Ring Adapters
section 12
Type “E” Type “E”
Style 31 Couplings with Type “D” and “E” Style 41 Couplings with Type “D” and “E”
Vic-Ring Adapters are available priced on Vic-Ring Adapters are available priced on
application. Specifiy Ring Adapter type on application. Specify Ring Adapter type on
order. Contact Victaulic for details. order. Contact Victaulic for details.
Style 44 Couplings Styles 41/44 Couplings
With Type “D” & ”E” Vic-Ring Adapters With Type “C” Vic-Ring Adapters
Request publication 16.05.
Type “E”
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
VE26 S/C/SS/P
VE26 S/C/SS/P VE26 is designed for manual grooving of 2 – 6” steel, stainless steel, aluminum, PVC, and copper tube.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs. Per Month List Price
VE26S – Steel, Stainless Steel R100026VE0 22/25 $585.00 $1256.50
VE26C – Copper Tube R200026VE0 22/25 585.00 1256.50
pipe preparation tools
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
VE26/VE46 Power Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and
improved VE26/VE46 to alternately groove pipe using stationary power drive.
Drive Kit Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs. Per Month List Price
VE26/VE46 Power Drive Kit R075-026-KIT 7/9 N/A $233.50
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE46/P VE46 is designed for manual grooving of 3Z\x– 6” steel, stainless steel, aluminum and PVC.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs. Per Month List Price
VE46 – Steel R000046VE0 28/31 $644.00 $1519.50
VE46P – Aluminum and PVC Plastic R200046VE0 28/31 644.00 1519.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
VE226 B/S/M/C/BSS/MSS/P
VE226 B/S/M/C/BSS/ VE226 is designed for use with a standard C\,” square drive for roll feed with operator supplied ratchet
wrench to roll groove C\v– 6” steel, stainless steel, aluminum, PVC and copper tube. Included are feeler
MSS/P † gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300®
power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs. Per Month List Price ^
VE226B – C\v– 1Z\x”/26 – 48 mm R2022260FS 27/42 $638.00 $1407.00
VE226S – 1Z\v– 6”/42 – 168 mm R2002260FS 27/42 638.00 1407.00
section 13
VE226BSS – C\v– 1Z\x”/26 – 48 mm R00X2260FS 27/42 638.00 1407.00
VE226MSS – 2 – 6”/60 – 168 mm RXM02260FS 27/42 638.00 1407.00
VE226P – 2 – 6” Aluminum and PVC Plastic R6002260FS 27/42 638.00 1407.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE226 Power Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive.
Drive Kit Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs. Per Month List Price
VE226 Power Drive Kit † R700-226-KIT 75/115 N/A $2289.50
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
* RX Rolls – “RX” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stain-
less steel pipe.
Purchase
Pipe Size List Price
Pipe Material Part Number Range Each Set †
R912106UA6 1Z\v– 6” Upper $140.00
Standard R912106L03 1Z\v– 3” Lower 394.50
394.50
section 13
RZ02106003 1Z\v– 3” Set 578.00
EndSeal
RZ04106006 4 – 6” Set 578.00
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.
Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel),
RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.
† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.
* Refer to How to Order at the end of this section.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS † The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The
VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes
are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking
grooving rolls. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Requires a VPD752 or Ridgid 300 power drive.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs. Per Month List Price
VE272SFS R000272SFS 184/250 $1006.50 $5354.00^
Optional Stabilizer (8 – 12” only) R4002720FS – 102.50 1453.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
pipe preparation tools
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
section 13
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set †
R900268001 C\v” $2056.00
R900268002 1 – 1Z\x” 1771.50
Standard R902272003 2 – 3Z\x” 995.00
R904272006 4 – 6” 1063.00
R908272012 8 – 12” 1185.00
RR02272006 2 – 6” 1233.00
Copper
RR08272008 8” 1732.00
RX02272003 2 – 3Z\x” 1387.00
Stainless RX RX04272006 4 – 6” 1488.00
RX08272012 8 – 12” 1491.00
RZ02272003 2 – 3Z\x” 1619.00
Endseal RZ04272006 4 – 6” 1655.50
RZ08272012 8 – 12” 1723.00
RP02272003 2 – 3Z\x” 1069.50
PVC/Aluminum 4 – 6” +
Contact Victaulic
8” +
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE270FSD Completely self-contained unit with integral gear motor, safety guards, safety foot switch and power
cord/plug. The VE270FSD uses a 110 power source, with a 220V model optional upon request. The tool is
supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Tool Weight/
Shipping Weight Rental
Tool Model Part Number Lbs Per Month List Price
VE270FSD R000270FSD 340/410 $2039.50 $10156.50^
Optional stabilizer (8 – 12” only) R400276FSD – 102.50 1596.50
^ For proper operation, a pipe stand is required. See Accessories for details.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
section 13
R900268001 C\v” $2056.00
R900268002 1 – 1Z\x” 1771.50
Standard R902272003 2 – 3Z\x” 995.00
R904272006 4 – 6” 1063.00
R908272012 8 – 12” 1185.00
RR02272006 2 – 6” 1233.00
Copper
RR08272008 8” 1732.00
RX02272003 2 – 3Z\x” 1387.00
Stainless RX RX04272006 4 – 6” 1488.00
RX08272012 8 – 12” 1491.00
RZ02272003 2 – 3Z\x” 1619.00
Endseal RZ04272006 4 – 6” 1655.50
RZ08272012 8 – 12” 1723.00
RP02272003 2 – 3Z\x” 1069.50
PVC/Aluminum 4 – 6” +
Contact Victaulic
8” +
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FSD/417FSD § VE416FSD/417FSD tools are completely self-contained units with integral gear motor, safety foot switch
and power cord/plug. VE416FSD uses 110V power, while the VE417FSD has a 220V power source.
VE416FSD/VE417FSD is supplied complete with 2 – 16” roll sets * (8 – 12” rolls are installed). It is equipped
with a pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway.
2 – 12” Original Groove Rolls
14 – 16” AGS Groove Rolls
NOTE: New tools supplied with AGS roll for 14 – 16”.
* For additional standard rolls and special rolls, see next page.
Tool Weigth/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
VE416FSD/VE417FSD R000417FSD 340/450 $3703.00 $23406.50^
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and
aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm
std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with
the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered
separately. Contact Victaulic for pricing and availability.
For 14 – 16” product applications requiring the original groove roll sets, please contact Victaulic for
ordering information.
VE416FSD/VE417FSD Ratings – Maximum Capacity †
Sch. 10 and
Std. Wall Stainless Std. Wall RW
AGS
section 13
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
# Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set †
R902416003 2 – 3Z\x” $1528.00
Standard R904416006 4 – 6” 826.50
R908416012 8 – 12” 894.50
AGS Standard RW RW01416016 14 – 16” 2259.00
RR02416006 2 – 6” 1997.00
Copper
RR08416008 8” 1367.50
RZ02416003 2 – 3Z\x” 1774.00
Endseal RZ04416006 4 – 6” 1207.50
RZ08416012 8 – 12” 1486.50
Plastic Pipe RP02416003 2 – 3Z\x” 2569.50
RX02416003 2 – 3Z\x” 1812.00
Stainless RX RX04416006 4 – 6” 1190.00
RX08416012 8 – 12” 1256.00
AGS Stainless RWX RWX1416016 14 – 16” 3002.50
RP02416003 2 – 3Z\x” 2569.50
PVC/Aluminum Contact Victaulic 4 – 6” +
8” +
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE416FS § VE416FS is provided with a mounting stand for field or shop assembly and set up. The stand and tool
must be mounted to a VPD752 or Ridgid 300® 38 rpm power drive before grooving. VE416FS is supplied
complete with 2 – 16” roll sets* (8 – 12” rolls are installed, unless otherwise specified). It is equipped with a
pipe stabilizer for 6 – 16” nominal pipe sizes to prevent pipe sway.
2 – 12” Original Groove Rolls
14 – 16” AGS Groove Rolls
NOTE: New tools supplied with AGS rolls when 14 – 16” roll sets are specified.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
VE416FS R0004160FS 240/400 $2751.00 $17393.50^
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and
aluminum pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm
std. wall carbon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with
the original groove rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered
separately. Contact Victaulic for pricing and availability.
For 14 – 16” product applications requiring the original groove roll sets, please contact Victaulic for
ordering information.
VE416FS Ratings – Maximum Capacity †
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
# Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set †
R902416003 2 – 3Z\x” $1528.00
Standard R904416006 4 – 6” 826.50
R908416012 8 – 12” 894.50
AGS Standard RW RW01416016 14 – 16” 2259.00
RR02416006 2 – 6” 1997.00
Copper
RR08416008 8” 1367.50
RZ02416003 2 – 3Z\x” 1774.00
Endseal RZ04416006 4 – 6” 1207.50
RZ08416012 8 – 12” 1486.50
Plastic Pipe RP02416003 2 – 3Z\x” 2569.50
RX02416003 2 – 3Z\x” 1812.00
Stainless RX RX04416006 4 – 6” 1190.00
RX08416012 8 – 12” 1256.00
AGS Stainless RWX RWX1416016 14 – 16” 3002.50
RP02416003 2 – 3Z\x” 2569.50
PVC/Aluminum 4 – 6” +
Contact Victaulic
8” +
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE450FSD VE450FSD is a self-contained unit with two 220 volt, single phase 50/60 hz, 20 amp integral gear motors
to handle heavier loads, safety foot switch and power cord/plug. VE450FSD is supplied complete with 4 –
12”/100 – 300 mm original groove roll sets and 14 – 24”/350 – 600 mm AGS groove roll sets.
Tool Weight/
Shipping Weight Rental
Tool Model Part Number Lbs Per Month List Price
VE450FSD R000450FSD 825 $3834.00 $30084.50
Optional Rolls: Optional rolls are available for 4 – 18”/100 – 450 mm lightwall stainless steel origi-
nal groove; 14 – 24”/350 – 600 mm lightwall stainless steel AGS groove; and 4 – 12”/100 – 300 mm
EndSeal (ES) groove. RP roll sets are also available for roll grooving aluminum and plastic.
Note: VE450FSD is designed for field use only and should not be used for shop produc-
tion.
VE450FSD Ratings – Maximum Capacity †
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
# Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available.
pipe preparation tools
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set †
R9Q1448006 4 – 6” $2964.50
Standard
R9Q1448012 8 – 12” 3844.50
AGS Standard RW RWQ2448024 14 – 24” 3862.50
RXQ1448006 4 – 6” 6959.00
RXQ1448012 8 – 12” 5634.50
Stainless RX RXQ1448016 14 – 16” 5615.50
RXQ1448020 18 – 20” 5703.50
RXQ1448024 22 – 24” 5975.50
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details.
NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details.
Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel),
RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set.
† Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic.
* Refer to How to Order at the end of this section.
VE268
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE268 † Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch
and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is
equipped with a pipe stabilizer for 8 – 12” nominal pipe sizes to prevent pipe sway. The tool is shipped
fully assembled for standard grooving (2 – 12” pipe) * (8 – 12” rolls are installed, unless otherwise speci-
fied).
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-
ent incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be
required.)
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
VE268 R000268VE0 735/766 $2408.00 $21747.50^
^ For proper operation, a pipe stand is required. See Accessories for details.
section 13
5 – 20
Aluminum *‡ 5 – 40 RP Rolls RP Rolls
PVC Plastic ‡ 40 ‡§ 40 – 80 RP Rolls 40 ‡
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set †
R900268001 C\v” $2056.00
R900268002 1 – 1Z\x” 1771.50
Standard R902272003 2 – 3Z\x” 995.00
R904272006 4 – 6” 1063.00
R908272012 8 – 12” 1185.00
RR02272006 2 – 6” 1233.00
Copper
RR08272008 8” 1732.00
RZ02272003 2 – 3Z\x” 1619.00
Endseal RZ04272006 4 – 6” 1655.50
RZ08272012 8 – 12” 1723.00
RX02272003 2 – 3Z\x” 1387.00
Stainless RX RX04272006 4 – 6” 1488.00
RX08272012 8 – 12” 1491.00
RP02272003 2 – 3Z\x” 1069.50
PVC/Aluminum 4 – 6” +
Contact Victaulic
8” +
VE414MC
VE414MC † Fully-motorized, semi-automatic, hydraulic tool is shipped fully assembled with rolls for standard groov-
section 13
ing (2 – 16” pipe *). Requires 220/440V, 3 phase, 60 Hz power supply. Safety guard, safety foot switch and
instructions are included. Pipe stabilizer for pipe 8” and larger is included, to prevent pipe sway.
2 – 12” Original Groove Rolls
14 – 16” AGS Groove Rolls
NOTE: New tools supplied with AGS rolls when 14 – 16” roll sets are specified.
Request RP-414MC for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual
amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-
ent incoming power requirements. (If your service is 208 volts, a “Boost & Buck Transformer” may be
required.)
* For additional standard rolls and special rolls, see next page.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
VE414MC R000414MC1 735/830 $3685.00 $31299.00^
^ For proper operation, a pipe stand is required. See Accessories for details.
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC and alumi-
num pipe, and type K, L, M and DWV copper tubing. AGS roll sets for 14 – 16”/350 – 400 mm std. wall car-
bon steel pipe are now standard. Tools sold prior to October, 2005, are equipped with the original groove
rolls that cannot be used to groove AGS profile. AGS roll sets can be ordered separately. Contact Victaulic
for pricing and availability.
For product applications requiring the original groove roll sets, please contact Victaulic for ordering infor-
mation.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
# Special RWX rolls for grooving true Sch. 10 (0.250/6,4 mm) are available.
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set †
R902416003 2 – 3Z\x” $1528.00
Standard R904416006 4 – 6” 826.50
R908416012 8 – 12” 894.50
AGS Standard RW RW01416016 14 – 16” 2259.00
section 13
Endseal RZ04416006 4 – 6” 1207.50
RZ08416012 8 – 12” 1486.50
PVC RP02416003 2 – 3Z\x” 2569.50
RX02416003 2 – 3Z\x” 1812.00
Stainless RX RX04416006 4 – 6” 1190.00
RX08416012 8 – 12” 1256.00
AGS Stainless RWX RWX1416016 14 – 16” 3002.50
RP02416003 2 – 3Z\x” 2569.50
PVC/Aluminum 4 – 6” +
Contact Victaulic
8” +
VE4
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE460 † Base Tool – Fully-motorized, semi-automatic, hydraulic shop tool is shipped fully assembled
with rolls for standard grooving (4 – 24”) .500 wall maximum.
4 – 12” Original Groove System Groove Rolls
14 – 24” AGS Groove Rolls
Requires 220/440/3/60 power supply. All tools are shipped 220 as a standard. Operating
instructions included.
Request RP-460 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amper-
age power requirements, refer to RP sheet supplied with tool. Each model may require different incoming
power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)
VAPS1672
pipe preparation tools
(R0001672PS)
KIT 2
40 – 48”/1000 – 1200 mm 1* 2 ** VAPS1672
40 – 48”/ R400460KIT N/A 2024.00 8400.00
(RWQ3460048) AGS (R550460KIT) (R551460PNT) (R0001672PS)
LIFTING POINT LIFTING POINT
section 13
1000 – 1200 mm
FRONT
FRONT
LIFTING POINT
FRONT
Optional Rolls: Optional rolls are available for Schedule 5S and 10S stainless steel pipe, PVC, and aluminum pipe.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
‡ Optional Accessory Kits list REQUIRED COMPONENTS to groove up to the specified size. Kit components can be ordered individually or as a kit.
* Railing and Platform Kit is required only if preceding kit has not been ordered.
** Only one (1) Support Base is required if preceding kit has been ordered.
^ For proper operation, a pipe stand is required. See Accessories for details.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pipe
Material Pipe Size/Schedule
4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 48 50 60
VE460 100 125 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1200 1250 1500
5 – Extra
Carbon Steel 5 – 80 10 – Extra Strong (.500) ^ AGS Std. (.375 – .500) ^ AGS
Strong
Stainless Steel Sch. 40 Only .375 RW AGS
Lt. Wall SS 5S – 10S RX Rolls 5S/10S/10 RWX Rolls
Aluminum # 5 – 40
PVC Plastic 40 – 80 40
Grooving Capabilities for Original Style Groove (OGS)
Carbon Steel .250 – .500 ^
Stainless Steel Std. (.375)
Lt. Wall SS 5S/10S/10 RX Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
‡ Use RP Rolls.
* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
^ Maximum ratings are limited to pipe that does not exceed the yield strength of API-5L Grade “B”, ASTM Grade “B”, 150 Brinell Hardness Number (BHN) maximum.
Pipe Preparation Tools
Purchase
Pipe Part Pipe Size List Price
Material Number Range Each Set
R9Q1460006 4 – 6” $2700.00
Carbon Steel Standard Wall R9Q1460012 8 – 12” 2605.00
and Stainless
RWQ2460024 14 – 24” AGS 2500.00
section 13
RWQX460018 14 – 18” AGS 5253.00
Lt. Wall Stainless Steel RWX
RWQX460024 20 – 24” AGS 5144.00
RPQ1460006 4 – 6” 5973.00
PVC/Aluminum
RPQ1460012 8 – 12” 5672.00
RZQ1460006 4 – 6” 5288.00
EndSeal
RZQ1460012 8 – 12” 4455.00
RXQ1460016 14 – 16” 4016.00
Lt. Wall Stainless Steel RX RXQ1460020 18 – 20” 6212.00
RXQ1460024 22 – 24” 5215.00
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
VAPS112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to
be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough
design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-
Easy roll grooving tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12” IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x” for adjusting rod; 8Z\x” leg adjustment; 23” total
pipe preparation tools
Min. Pipe Height from Floor: 23” on 12” pipe; 21” on 1” pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
section 13
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
VAPS 112 R000112PS0 190/220 $602.00 $4347.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
VAPS224 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and
traversing on ball transfers. Turnstile design allows pipe to be spun around for grooving of both pipe
ends without dismounting pipe from stand. They are designed for direct use with Vic-Easy roll grooving
tools: VE416/FSD, VE414MC, VE436MC, VE460.
Capacities: 2 – 24” IPS pipe †
Load Rating: 1800 lbs
Vertical Stroke: 21”
Min. Pipe Height from Floor: 14” on 24” IPS pipe
Max. Pipe Height from Floor: 39” on 2” IPS pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
VAPS 224 R000224PS0 260/315 $732.00 $6525.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VAPS1672 Vic-Easy Adjustable Pipe Stands are portable and self-standing units that permit free pipe rotation and
traversing on ball transfers. They are designed for direct use with Vic-Easy roll grooving tools: VE436MC
and VE460.
Capacities: 16 – 72” pipe †
Load Rating: 10000 lbs
Vertical Stroke: 17”
Min. Pipe Height from Floor: 16” on 72” pipe
Max. Pipe Height from Floor: 28” on 16” pipe
Tool Weight/
Shipping Weight
Tool Model Part Number Lbs. Rental Per Month List Price
VAPS1672 R0001672PS 480 $4367.00 $15709.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in
publication 24.01.
VE436MC Quick The VE436MC Quick Change Slide Conversion Kit includes an upper shaft and slide held in place by a
detent pin for improved efficiency. The kit also includes 4 – 12”/100 – 300 mm standard groove upper
Change Slide rolls, 14 – 24”/350 – 600 mm AGS groove upper rolls, pipe size, pipe rotation, guard setting labels, and
Conversion KIt guard setting pads (standard and AGS).
NOTE: Upper rolls only are included with the kit. Lower rolls can be purchased separately. Retain original
slide, shaft, set screws and roll grooving assembly for future use.
Kit Weight Kit
Conversion Kit Part Number Lbs List Price
VE436MC Quick Change Slide Conversion Kit R150436KIT 106 $7260.00
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
VG28GD Ratings
* 6”/150 mm Schedule 8
VG28GD Parts
* Requires Special Cast Iron Rigid Pipe Stops (Part No. R-016-280-AVG [2 required]).
NOTE: Special urethane covered Idler Roll (Part No. R-033-281-AVG) recommended for grooving glass lined pipe.
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG824 * Includes tool set for grooving 8 – 12” standard steel pipe, crate, operating instructions, tool bit removal
kit, wrench and one extra 8 – 24” standard groove steel pipe tool bit.
Capacities: 8 – 24” steel (and other IPS) and 8 – 24” cast and ductile pipe (Additional bits required)
Note: Tools bits and stops for D.I. are optional. See below.
Tool Weight/
Shipping Weight Rental Total
Tool Model Part Number Lbs Per Month List Price
VG824 R000824AVG 82/126 $2361.00 $25968.00
* NOTE: Victaulic Cut Grooving Tools require an external power source (see Power Mule in Pipe Preparation Tool Accessories).
VG824 Ratings
Pipe
Material Pipe Size/Wall Thickness
8 10 12 14 16 18 20 22 24
VG824 200 250 300 350 400 450 500 550 600
Steel Sch. 40 – 80 Sch. 30 – Std. Wall
Stainless Sch. 30 – Std. Wall
Aluminum Sch. 30 – Std. Wall
Ductile Iron Class 53 Min.
VG824 Parts
Type
Type Pipe Groove Tool Bit Pipe Stop
Pipe/Size Part Purchase Pipe/Size Part Purchase
Marking Numbers Price Each Marking Numbers Price Each
8 – 12” Std. R424824AVG $504.00
Steel (and Std. 8 – 24” Std. RK08824024 $215.00
other IPS 14 – 24” Std. R024824AVG 504.00
Metallic)
EndSeal 8 – 12” ES RK08824Z12 285.00 8 – 12” Std. R424824AVG 504.00
8” CIR RK08824G08 285.00 8” CI R524824AVG 504.00
section 13
8 – 12” CIF RK08824E12 285.00 8” CI R524824AVG 504.00
Flexible
14 – 24” CIF RK14824E24 285.00 10 – 12” CI R024824AVG 504.00
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
NOTE: Special urethane covered Idler Roll (Part No. R-201-824-AVG) recommended for grooving glass lined pipe. Center
adjustable stop (Part. No. R-025-824-AVG) available.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG412 Orbital Includes riser blocks and grooving heads for cut grooving 4 – 12” ductile iron rigid groove. Power drive
supplied requires 120 volt, 11.5 amp electrical supply. Stand included at no extra charge.
Grooving Tool
Capacities: 4 – 12” ductile iron pipe
Note: Tools bits and stops for D.I. are optional. See below.
Tool Weight/
Shipping Weight Rental
Tool Model Part Number Lbs Per Month List Price
VG412 Orbital Grooving Tool R000412AVG 270/365 $2527.00 $30619.00
IPS Steel kit for cutting and grooving* N003412034 – 508.00 5057.50
(recommended only for lined steel pipe)
Optional flexible spacer blocks: N220412667 – – 178.50
4 – 6”
8” N220412668 – – 192.50
10 – 12” N220412669 – – 199.50
* NOTE: Steel grooving kit can only be rented with rental tool.
VG412 Ratings
Pipe
Material Pipe Size/Wall Thickness
4 4Z\x 5 6 8 10 12
VG412 100 120 125 150 200 250 300
Steel Sch. 40 – 80
Ductile Iron Class 53 Min.
VG412 Parts
Straight 8 – 12 N220412679
Ductile Iron #
Angled 8 – 12 N220412569 313.50
Solid Cut–Off Blade N275412055 96.00
section 13
# Carbide Tipped Tool Bits supplied for grooving cast and ductile pipe have one edge not suitable for resharpening.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VG Vic-Groovers are designed for cut grooving a single size on standard size steel pipe. Vic-Groovers are
supplied with an extra tool bit and ratchet handle. 2” and larger tools include a power yoke. Power yoke
is available for C\v and 1” (Part. No. R0240030VG). 1Z\v and 1Z\x” (Part No. R0240050VG) tools at $146.00
additional.
NOTE: Vic-Groovers not recommended for use with a hand-held power drive.
Pipe Standard or “ES” Tool Complete w/Yoke and Extra Tool Bit *
Outside VG Tool Part Number Purchase
Size Diameter Weight Each Price
Inches Inches Lbs Standard * ES Each
C\v 1.050 11.0 R0000030VG – $1259.50
1 1.315 11.0 R0000040VG – 1259.50
1Z\v 1.660 12.0 R0000050VG – 1259.50
1Z\x 1.900 12.0 R0000060VG – 1259.50
2 2.375 12.0 R0000080VG R00E0080VG 1403.50
2Z\x 2.875 16.0 R0000100VG R00E0100VG 1759.50
3 3.500 16.0 R0000120VG R00E0120VG 1811.50
3Z\x 4.000 18.0 R0000140VG – 1972.50
4 4.500 18.0 R0000160VG R00E0160VG 1972.50
5 5.563 25.0 R0000200VG – 2726.50
6 6.625 25.0 R0000240VG R00E0240VG 2726.50
8 8.625 45.0 R0000320VG R00E0320VG 2873.50
* Tools for PVC and Stainless Steel add $24.50 to the standard tool price.
section 13
2Z\x R0080030VG R0640080VG 126.00 162.00
3 R0080030VG R0640080VG 126.00 162.00
3Z\x R0080140VG – 126.00 +
4 R0080140VG R0640160VG 126.00 173.00
5 R0080200VG – 209.00 +
6 R0080200VG R0640240VG 209.00 230.50
8 R0300320VG R0640320VG 84.50 257.50
* Tool bits for PVC and Stainless Steel add $24.50 to the standard tool bit price.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pipe
Material Pipe Size/Wall Thickness
VG46 Individual C\v 1 1Z\v 1Z\x 2 2Z\x 3 3Z\x 4 5 6 8
Steel Sch. 40 – 80
Stainless Sch. 40 – 80
Aluminum Sch. 40 – 80
PVC Sch. 40 – 80
VG46 Adjustable
Steel Sch. 40 – 80
Stainless Sch. 40 – 80
Aluminum Sch. 40 – 80
VG46
Class
Ductile Iron Class 53 Min.
53
pipe preparation tools
section 13
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
PT-100-A Go/ Pocket-sized steel tapes are available for taking circumferential measurements. This diameter tape
contains Go/No-Go markings on one side for use with ANSI B36.19 and many ISO-4200 pipe sizes, and
No-Go Grooved Pipe diameter markings to 100th of an inch on the other side. Tapes are notched on the lead end to allow
Diameter Tape proper overlap within the groove for more accurate measurement.
Tool Model Part Number Purchase Price
section 13
NOTICE
• Tape contains Go/No-Go markings on one side for use with C\v– 24”/20 – 600 mm pipe in ANSI
B36.19 and many ISO-4200 sizes and is marked in 1/100th of an inch increments on the other
side.
• The Go/No-Go side can be used to check cut or roll grooved pipe conformance to Victaulic
original and Machined for Rubber Lining (MRL) (C\v– 12”/20 – 300 mm) and Advanced Groove
System (AGS) (14 – 24”/350 – 600 mm) groove diameter specifications.
• Tapes are notched on the lead end to allow proper overlap within the groove for more accurate
measurement.
• The Go/No-Go side of the tape is not intended for use on sizes 76.1; 139.7; 165.1; 165.2; 216.3;
267.4; and 318.5 mm steel or stainless steel pipe sizes. For cast or ductile iron pipe sizes (up to
20”/500 mm), copper tube sizes, and the steel and stainless steel pipe sizes listed above, use
the side of the tape marked in 0.01” increments.
• The Go/No-Go pipe tape is a quick reference guide only. To ensure proper grooving dimensions,
always refer to the I-100 Victaulic Field Installation Handbook or to the latest groove specifica-
tions publications located on www.victaulic.com.
Tool Carry Bag Heavy duty tool carry bag for transporting Vic-Easy Roll Grooving Tools, grooving rolls, and other tools.
Carry bag can accommodate up to 50 lbs.
Tool Weight/
Shipping Weight Tool
Tool Model Part Number Lbs List Price
Tool Carry Bag NM15000002 4/6 $93.00
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pipe
Material Pipe Size/Schedule
2 2Z\x 3 3Z\x 4 4Z\x 5 6
VPG26 50 65 80 90 100 120 125 150
PVC 40 – 80 PVC
VPG824
VPG824 Includes Tool with self-contained grooving motor (115/50) and tool bit for Schedule 40 – 80 PVC, crate,
operating instructions, and tool bit chuck wrench.
Capacities: 8 – 16” Schedule 40 – 80 PVC and similar plastic pipe only
Tool Weight/
Shipping Weight Rental
pipe preparation tools
Extra tool bits for 8 – 16” standard plastic radius R023826MAC – – 445.50
cut grooving
Pipe
Material Pipe Size/Schedule
VPG824 8 10 12 14 16
PVC 40 – 80 PVC
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless
steel pipe. This allows for use of Mechanical-T®, Vic-Let®, Vic-O-Well and Style 922 Outlet Tee. The speed is
variable and requires 110 volt power supply to operate.
Capacities: 1 – 4Z\x” holes for Z\x– 4” Mechanical-T, Vic-Let connections.
Tool Weight/
Shipping Weight Rental Tool
Tool Model Part Number Lbs Per Month List Price
HCT908 R000908HCT 35/48 $540.00 $2444.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
section 13
Inches Part Number List Price Each
1 N-M18-000-011 $77.00
1Z\v N-M18-000-016 77.00
1Z\x N-M18-000-021 77.00
1C\v N-M18-000-026 77.00
2 N-M18-000-031 77.00
2C\, N-M18-000-036 86.50
2Z\x N-M18-000-037 86.50
2C\v N-M18-000-040 86.50
3Z\x N-M18-000-047 86.50
4Z\x N-M18-000-050 86.50
Purchase
Part Name Part Number List Price
Arbor (Mandrel) R-400-900-HCT $210.50
Arbor (1” saw only) R-450-900-HCT 299.50
Coupon Retaining Pilot Drill R-402-900-HCT 88.50
Chuck Key Assembly R-314-900-HCT 94.50
Levels N-M14-000-006 57.00
Coupon Remover Assembly R-050-900-HCT 43.50
Long Chain – For Vic-Let * R-170-900-HCT 766.50
* For use with VHCT900 to accommodate pipe sizes greater than 24”.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $503.00. Part. No. N-E15-000-004.
PFT505
pipe preparation tools
section 13
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Pressfit® Tools
PFT505 The Pressfit Tool is supplied in a carrying case with a Pressfit System Product Assembly and Tool
Operation Manual.
The Pressfit Tool is electrically powered and hydraulically driven and requires a 110v/60 cycle/6.5 amp –
AC current supply.
NOTE: Jaws available only for rent with the rental of a Pressfit Tool.
Tool Weight/
Shipping Weight Rental
Tool Model Part Number Lbs Per Month List Price
PFT505 Pressfit Tool – Tool Only R000505PFT 43 $657.00 $5112.00
PFT505 Jaws Only Individual Pressfit jaws are available for rental or purchase. Specify size required on order.
Tool Weight/
Shipping Weight Jaw Size Rental
Tool Model Part Number Lbs Inches Per Month List Price
R3DC500050 Z\x $180.00 $1189.50
R3DC500075 C\v 180.00 1189.50
R3DC500100 1 180.00 1189.50
Pressfit Jaws Only 15
R3DC500125 1Z\v 180.00 1189.50
R3DC500150 1Z\x 180.00 1189.50
R3DC500200 2‡ 180.00 1189.50
‡ 2” NOTE: In order to properly press 2” Style 570, 590, 568 and 586 stainless steel elbows, your press jaws must contain the
prefix 3DC.
section 13
PFT509 Pressfit Tool The Pressfit Tool is supplied in a carrying case with a Pressfit System Product Assembly and Tool
Operation Manual.
The Pressfit Tool is battery powered and hydraulically driven.
Tool Weight/
Shipping Weight
Tool Model Part Number Lbs Tool List Price
Radial Press, Charger, 4 Jaws, 2 Batteries, Steel R000509PFT 46 $5333.00
Carrying Case
PFT509 Jaws Only Individual Pressfit jaws are available for purchase. Specify size required on order.
Tool Weight/
Shipping Weight Jaw Size
Tool Model Part Number Lbs Inches List Price
RJAW509050 Z\x $603.50
RJAW509075 C\v 603.50
Pressfit Jaws Only 15
RJAW509100 1 603.50
RJAW509150 1Z\x 1979.50
Pressfit Accessories
* To increase capacity, a 40-inch chain is available for $315.00 (Part No. N-C00-002-VCT).
VCT2 – Automatic
VCT2 VCT2 Automatic is powered by a 120 VAC motor with SCR remote control. A steel guide rail is recom-
mended for cuts on vertical pipe (over 12” diameter). Tools are supplied with one each #00, #0, and #1
acetylene tips. Other tips are available for propane, MAPP and other gases. Tools are supplied with tip
cleaner and lighter.
Capacities: 6” – 24” pipe *
Wall Thickness: 0.065” – 0.0500” (with tips supplied)
Speed Control: SCR
Power Required: 120 VAC
pipe preparation tools
NOTE: Guide rail is sold separately. Recommended for pipe 14” and above.
Tool Weight/
Shipping Weight
Tool Model Part Number Lbs List Price
VCT2 R000912VCT 33/39 $7917.00
Guide Rail D-600 for up to 24” pipe NC00170VC2 – 2084.50
* To increase capacity, a 40-inch chain is available for $315.00 (Part No. N-C00-002-VCT).
Accessories
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
WARNING
• Always read and understand all operating and maintenance instructions before
attempting to use any Victaulic pipe preparation tools.
• Any Victaulic pipe preparation tools must be used by trained operators ONLY.
Operators that use Victaulic Pipe Cut-Off Tools must be knowledgeable in sound
welding and safety procedures.
Misuse of any equipment and lack of adherance to proper safety procedures may
result in serious personal injury, property damage, and/or product damage.
How To Order When ordering tools or tool parts, please include the following information:
A. PARTS ORDERS
1. Tool Model Number. Example: VE436MC.
2. Tool Serial Number. The serial number can be found on the tool name plate. Example: 0436 xxxx.
3. Part Number and Description. Example: Part #105, Upper Shaft.
4. Where to send the part(s). Company Name, Address and Telephone Number
5. Attention: Person’s Name
6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.
B. TOOL ORDERS
1. Tool Model Number. Example: VE416FSD.
2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool.
3. Where to send the tool. Company Name, Address and Telephone Number
4. Attention: Person’s Name
5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.
section 13
3. Tool Model Number. Example: VE272SFS
4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool.
5. Where to send the tool. Company Name, Address and Telephone
6. Attention: Person’s Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations.
NOTES:
Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving.
PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116.
Copper/nickel pipe - contact Victaulic for details.
Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets.
Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension
charts and to ANSI/AWWA C-606 standards.
SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done.
Optional rolls are available at an additional cost.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current
Victaulic price list for Pipe Preparation tools.
section 13
12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its
agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of what-
soever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee’s delivery, pos-
session, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the
termination of this Lease.
13. Lessor’s remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the
same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions
of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding
against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies:
(a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the
Lessee.
(b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property.
(c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other pro-
cess of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termina-
tion of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing.
(d) To terminate this lease as to any or all items of leased property.
(e) To pursue any other remedy at law or in equity.
Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all obli-
gations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental or
sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee’s
obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or sepa-
rately.
14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as
amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors,
or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver
is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property,
the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without
notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addi-
tion to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor’s expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney’s fees, incurred by the Lessor in exercising any of its rights or rem-
edies hereunder or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors,
administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid,
it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
section 13
shortages or delays and note them on freight bill over his signature.
Weights: All weights are approximate shipping weights and subject to change without notice.
Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change
product specifications, designs, and standard equipment without notice and without incurring obligation.
WARRANTY
Standard product warranty applies. See Inside Back Cover.
NOTE: Reconditioned tools shall be warranted 30 days from date of purchase.
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications, designs,
and standard equipment without notice and without incurring obligation.
Warranty
We warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation
under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery
to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been
defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER’S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR
OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT
LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER
INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been
repaired or altered in any manner outside of Victaulic’s factory or which has been used in a manner contrary to Victaulic’s
instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete
information supplied by Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer’s warranty extended to Victaulic customers.
EFFECTIVE AUGUST 4, 2008