Professional Documents
Culture Documents
www.sefindia.org
STRUCTURAL ENGINEERING FORUM OF INDIA [SEFI]
Subscriptions Digest Preferences FAQ Search Memberlist Usergroups Register Security Tips Donate
Profile Log in to check your private messages Log in to website Log in to forum
Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them. They may contain viruses.
Use online scanners here and here to upload downloaded attachment to check for safety.
Author Message
vk.wits Posted: Sun Aug 18, 2013 6:37 pm Post subject: PILE CAP DESIGN USING SAFE
SEFI Regulars
HI,
I GOT SUPPORT REACTIONS FROM STAAD PRO i.e. AXIAL LOAD AND MOMENTS NOW I WANT TO
DESIGN PILE FOUNDATION. CAN ANY ONE TELL ME PROCEDURE OF DESIGNING PILE IN SAFE
OR CAN ANY OF YOU TELL ME THE THEORETICAL TEXTBOOK PROCEDURE WITH A EXAMPLE
HAVING Fy & Mz GIVEN
Joined: 19 Aug 2011
Posts: 21
Back to top
Thankful People
sanjaya_kumara Posted: Mon Aug 19, 2013 5:53 am Post subject: Re: PILE CAP DESIGN USING SAFE
SEFI Member
vk.wits wrote:
Joined: 15 Aug 2013 HI,
Posts: 3 I GOT SUPPORT REACTIONS FROM STAAD PRO i.e. AXIAL LOAD AND MOMENTS NOW I
WANT TO DESIGN PILE FOUNDATION. CAN ANY ONE TELL ME PROCEDURE OF DESIGNING
PILE IN SAFE OR CAN ANY OF YOU TELL ME THE THEORETICAL TEXTBOOK PROCEDURE
WITH A EXAMPLE HAVING Fy & Mz GIVEN
Regards
Sanjaya
Back to top
rajancivildesign@gmail.co Posted: Tue Aug 20, 2013 5:26 am Post subject: Pile Design
...
Dear Sir,
First you have to choose type of Pile based on N value and load requirement and existing
https://www.sefindia.org/forum/viewtopic.php?p=59899 1/5
6/22/2019 www.sefindia.org :: View topic - PILE CAP DESIGN USING SAFE
adjoining structure arrangement. Pile can be designed based on IS2911-2009 (part1/sec1
&2)-2009. For bored cast in situ minimum dia of pile is 450mm. Pile capacity may be worked out
based Static formula as per IS2911. A typical pile capacity calculation for 450mm dia bored pile
is attached for reference. Based on allowable deflection and safe load assesed based on soil
report, we can check and worked out the reinforecement for pile. I have not shown the
Joined: 26 Jan 2011 calculation based on soil report here.
Posts: 537
V.M.RAJAN.
Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them.
They may contain viruses.
Use online scanners here and here to upload downloaded attachment to check for safety.
Back to top
The material posted is very useful. The soil design of pile, if you have it with you as a note, may
also please be posted.
Back to top
VPandya Posted: Tue Aug 20, 2013 12:45 pm Post subject: In USA we use ASTM Load tests for Pile Capacity
General Sponsor .
See my SEFI post dated 5th June 2013. To arrive at Pile Capacity in Soil we use ASTM Load
tests. Also allowable Pile Capacity is given by Geotech. Consultant and we Structural Engineers
just pick-up a Pile Size and its Pile Capacities from the table Geotech. Consultant gives for
different sizes of Piles. I have noticed that in India , Structural Engineers get in to
calculating Pile Capacities, which is a Geotech Specialty.
Regards.
Joined: 09 Nov 2009
Posts: 756
Location: Ahmedabad Vasudeo Pandya P.E. ; S.E.
Structural Engineer
In USA Pile Capacity is derived from ASTM Load Tests. They are given here. Allowable Pile
Capacity is about half the Ultimate Load and near 10 mm to 12 mm Lateral displacements. I
am sure your Geotech. Consultant has based his Pile Capacities on such testing. You will also
need Lateral Load Capacity of Piles.
D1143 / D1143M Standard Test Methods for Deep Foundations Under Static Axial
- 07 Compressive Load.
D3689 - 07 Standard Test Methods for Deep Foundations Under Static Axial
https://www.sefindia.org/forum/viewtopic.php?p=59899 2/5
6/22/2019 www.sefindia.org :: View topic - PILE CAP DESIGN USING SAFE
Tensile Load.
Standard Test Methods for Deep Foundations Under Lateral
D3966 - 07
Load.
Regards.
Vasudeo Pandya P.E. ; S.E.
Structural Engineer
---------------------------------------------------------------------------
Back to top
Pile capacity,
Joined: 23 Jan 2011 it depends upon geotech parameters,you can find about pile capcaty examples in Foundation
Posts: 65 manual by NV Nayek
Pile Design,
Refer IS 2911 & Handbook of limit state design of RC memebers by VK ghanekar & JP Jain
model raft and provide spring stiffness constant in vertical and horizontal direction as given by
geotech consultant.
Stiffness K = F/delta,
Back to top
rajancivildesign@gmail.co Posted: Wed Aug 21, 2013 5:30 am Post subject: Pile cAp Design using SAFE
...
Sir,
Is there any worked example or step by step procedure available for design a Pile cap in SAFE
software. If so, kindly sent to my email please.
email id. rajancivildesign@gmail.com
Back to top
vk.wits Posted: Wed Aug 21, 2013 1:01 pm Post subject: example from ‘Reinforced Concrete Design’ by
SEFI Regulars S.N.Sinha
Warning: Make sure you scan the downloaded attachment with updated antivirus tools before opening them.
They may contain viruses.
https://www.sefindia.org/forum/viewtopic.php?p=59899 3/5
6/22/2019 www.sefindia.org :: View topic - PILE CAP DESIGN USING SAFE
Use online scanners here and here to upload downloaded attachment to check for safety.
Back to top
vk.wits Posted: Wed Aug 21, 2013 1:50 pm Post subject: steps
SEFI Regulars
pravin_shirsath wrote:
Pile capacity,
it depends upon geotech parameters,you can find about pile capcaty examples in Foundation
manual by NV Nayek
Pile Design,
Joined: 19 Aug 2011
Posts: 21
Refer IS 2911 & Handbook of limit state design of RC memebers by VK ghanekar & JP Jain
model raft and provide spring stiffness constant in vertical and horizontal direction as given
by geotech consultant.
Stiffness K = F/delta,
respected sir,
can you please tell me the step by step procedure adopted for designing in SAFE.
sir this procedure only give analysis result like max. displcement,what i have do for structural
designing ?
Back to top
rajancivildesign@gmail.co Posted: Wed Aug 21, 2013 3:26 pm Post subject: Pilecap Design using Excell
...
Dear Sir,
At present I herewith attached the pilecap design as per BS code. However I shall sent the pile
design and pile cap manual design shortly.
V.M.RAJAN
CID Pilecaps.XLS
Description:
Filename: CID Pilecaps.XLS
Filesize: 1.11 MB Download
Downloaded: 2114 Time(s)
Back to top
www.sefindia.org Forum Index -> SEFI General All times are GMT
Discussion Goto page 1, 2 Next
Page 1 of 2
https://www.sefindia.org/forum/viewtopic.php?p=59899 4/5
6/22/2019 www.sefindia.org :: View topic - PILE CAP DESIGN USING SAFE
SAT, 15 JUN
Advanced Workshop on Steel Design
Vi t M C ti C t IIT B b M b i
https://www.sefindia.org/forum/viewtopic.php?p=59899 5/5