Professional Documents
Culture Documents
doc
BREZIAT Benjamin Indice 1 27/07/2011
Enter the user password: 1635 », and press to see setting page.
In order to have normal speed movement go to default settings to initialize the procedure.
(Warning, you have to complete the entire procedure to save setting values)
Select the minimum angle setting and press to set the value.
Select the minimum length setting and press to set the value.
Select minimum pressure setting and push the joystick in front position and press to set values,
joystick can now released.
PROCEDURE FOR SETTING MD3 EN15000.doc
BREZIAT Benjamin Indice 1 27/07/2011
Boom is completely Up
Boom is completely extended.
Select the maximum angle setting and press to set the value.
Select the maximum length setting and press to set the value.
PROCEDURE FOR SETTING MD3 EN15000.doc
BREZIAT Benjamin Indice 1 27/07/2011
Special case: If the machine is delivered with Scania engine, you must adjust the throttle pedal.
Press to F4 to access
settings.
PROCEDURE FOR SETTING MD3 EN15000.doc
BREZIAT Benjamin Indice 1 27/07/2011
Select the minimum setting of the throttle pedal and press to confirm.
Select the maximum setting of the throttle pedal and press to confirm.