Professional Documents
Culture Documents
11
====================================
Lavteam
>&device -oecho no
>&dimen -DIMEN METERS M-TONS
>&title Sample of Multi-Point Mooring
>inmodel
Time To perform Inmodel : CP= 0.10
>&instate -CONDITION 4.6 0 0
>medit
>*MLA 139 0 9
>*MLB 139 0 9
>*MLC 0 0 9
>*MLD 0 0 9
>~WIRE b_cat 44 -DEP 77 -LEN 850 -BUOY 0 -WTPL .00737
>CONNECTOR A -ANC 0 625.47 ~WIRE *MLA
>CONNECTOR C -ANC -45 625.47 ~WIRE *MLB
>CONNECTOR E -ANC -135 625.47 ~WIRE *MLC
>CONNECTOR G -ANC 180 625.47 ~WIRE *MLD
>end_medit
>&subtitle AFTER MEDIT
>&connector @ -a_tension 5
Moving Attachment of Connector A
================================
Moving Attachment of Connector C
================================
Moving Attachment of Connector E
================================
Moving Attachment of Connector G
================================
>&subtitle AFTER MOVING ANCHOR
>&picture starb -render wf
>&subtitle
>CONN_DESIGN
>TABLE A
>REPORT
>vlist
The Variables Available for Selection are:
==========================================
1 Horizontal Distance 5 Max T/Break 9 Hor. Pull On Anchor
2 Horiz. Force At Top 6 Critical Break 10 Line On Bottom
3 DHDX 7 Critical Segment 11 Height Of 1st Conn.
4 Tension At Top 8 Vert Pull On Anchor 12 Load On 1st Conn.
Process is DEFAULT: Units Are Degrees, Meters, and M-Tons Unless Specified
Location and Net Force at Body Origin
Body X Y Z RX RY RZ
-------- --------- --------- --------- --------- --------- ---------
ARMADA_K Location 0.03 -1.83 -4.60 -0.01 0.00 0.14
N Force 0.01 -5.26 0.30 11 -19 -372
Process is DEFAULT: Units Are Degrees, Meters, and M-Tons Unless Specified
Results Are Reported In Body System
Process is DEFAULT: Units Are Degrees, Meters, and M-Tons Unless Specified
Results Are Reported In Body System
Type of Force X Y Z MX MY MZ
------------------ --------- --------- --------- --------- --------- ---------
Weight 0.00 1.89 -17863.14 -72 1361196 144
Buoyancy -0.00 -1.89 17872.61 37 -1361853 -143
Inertia -0.01 5.26 -0.30 -10 20 373
Flex. Connectors 0.01 -5.26 -9.17 47 638 -372
======= ======= ======= ======= ======= =======
Total 0.00 0.00 0.00 0 0 0
>HYDR_SUM
>V_MDRIFT
>REPORT
>END
>end_hydrodynamics
>&env TEST -sea jonswap 0 2.6 6.7
>&equi
+++ C U R R E N T S Y S T E M C O N F I G U R A T I O N +++
===============================================================
Process is DEFAULT: Units Are Degrees, Meters, and M-Tons Unless Specified
Location and Net Force at Body Origin
Body X Y Z RX RY RZ
-------- --------- --------- --------- --------- --------- ---------
ARMADA_K Location -6.30 -6.24 -4.60 -0.02 0.00 -1.94
N Force -6.09 -5.37 -10.59 36 901 -406
Process is DEFAULT: Units Are Degrees, Meters, and M-Tons Unless Specified
Forces in Body System at Attachment - Magnitude is Sqrt( X**2 + Y**2 + Z**2 )
Process is DEFAULT: Units Are Degrees, Meters, and M-Tons Unless Specified
Results Are Reported In Body System
Type of Force X Y Z MX MY MZ
------------------ --------- --------- --------- --------- --------- ---------
Weight 1.46 5.46 -17863.14 -104 1361209 416
Buoyancy -1.46 -5.48 17914.28 106 -1365401 -417
Wave Drift -19.76 -2.87 -52.38 12 4111 -228
Inertia 6.09 5.37 10.59 -35 -900 407
Flex. Connectors 13.67 -2.48 -9.35 22 983 -175
======= ======= ======= ======= ======= =======
Total -0.00 0.00 0.00 0 0 0
>&describe interest -associate *M@
>freq_response
>RAO -SPEED 0
Time To Compute RAOs : CP= 0.05
>equ_sum
>&subtitle RESULTS WITH RAO COMMAND
>FP_STD 76.20138 3.171955E-3 8.820001
>MATRICES -FILE YES
>report
>end
>fr_point
>REPORT
>end
>st_point test
>REPORT
>end
>fr_cforce a
>REPORT
>vlist
The Variables Available for Selection are:
==========================================
1 Frequency 6 FY-Phase:A 11 MY-Amp:A
2 Period 7 FZ-Amp:A 12 MY-Phase:A
3 FX-Amp:A 8 FZ-Phase:A 13 MZ-Amp:A
4 FX-Phase:A 9 MX-Amp:A 14 MZ-Phase:A
5 FY-Amp:A 10 MX-Phase:A
>end
>st_cforce @ test
>REPORT
>end
>end_freq_response
>&subtitle
>&FINISH