You are on page 1of 12

1/12

List of the Accredited Standard Test Methods in the PPTL

of PRISTA OIL HOLDING EAD


according to the requirements of EN ISO 17025

EN ISO 2592
ASTM D 92
Determination of flash and fire points -- Cleveland open cup method

EN ISO 2719
ASTM D 93
Determination of flash point -- Pensky-Martens closed cup method

ISO 3016
ASTM D 97
Petroleum products -- Determination of pour point
EN 116
Diesel and domestic heating fuels. Determination of cold filter
plugging point

BDS 10126
ASTM D 1177
Standard Test Method for Freezing Point of Aqueous Engine
Coolants

EN 23015
ASTM D 2500
Determination of cloud point of petroleum products

BDS 1751
Lubricants and dark petroleum products. Determination of freezing
point.

ISO 2137
ASTM D 217
Petroleum products -- Lubricating grease and petrolatum --
Determination of cone penetration
2/12

EN ISO 3104
ASTM D 445
Petroleum products -- Transparent and opaque liquids --
Determination of kinematic viscosity and calculation of dynamic
viscosity
ISO 2909
ASTM D 2270
Petroleum products -- Calculation of viscosity index from kinematic
viscosity

ISO 6247
ASTM D 892
Petroleum products -- Determination of foaming characteristics of
lubricating oils

ASTM D 971
Standard Test Method for Interfacial Tension of Oil Against Water by
the Ring Method

BDS 10126
Standard Test Method for Determination of Weight Loss During
Corrosion Testing (Copper, Solder, Brass, Steel, Cast Iron, Silumin)

ISO 7120
ASTM D 665
Petroleum products and lubricants -- Petroleum oils and other fluids -
- Determination of rust-preventing characteristics in the presence of
water
3/12

EN ISO 3675
ASTM D 1298
Crude petroleum and liquid petroleum products -- Laboratory
determination of density -- Hydrometer method

ASTM D 1122
Standard Test Method for Density or Relative Density of Engine
Coolant Concentrates and Engine Coolants by the Hydrometer

ISO 6614
ASTM D 1401
Petroleum products -- Determination of water separability of
petroleum oils and synthetic fluids

ISO 2049
ASTM D 1500
Petroleum products -- Determination of colour (ASTM scale)
4/12

BDS 1752
ASTM D 664
Standard Test Method for Acid Number of Petroleum Products by
Potentiometric Titration

ISO 6618
ASTM D 974
Petroleum products and lubricants -- Determination of acid or base
number -- Colour-indicator titration method

BDS 5167
Greases. Determination of Neutralization Number.

BDS 5252
Greases. Determination of the Presence of Watersoluble Acids and
Bases.

BDS 5496
ASTM D 94
Standard Test Methods for Saponification Number of Petroleum
Products

BDS 9778
Additives and Lubricants with Additives. Determination of the
Contents of Barium, Calcium, Magnesium and Zinc.

EN 62021-1
Insulating liquids - Determination of acidity -- Part 1: Automatic
potentiometric titration.

BDS 7987
Greases. Determination of Solid Particulate Matter Contents, HCl
Insoluble

ISO 2176
ASTM D 566
Petroleum Products - Lubricating Grease - Determination of
Dropping Point

ASTM D 2272
Standard Test Method for Oxidation Stability of Steam Turbine Oils
by Rotating Pressure Vessel (RРVOT)
5/12

BDS 9787
ASTM D 2783
Standard Test Method for Measurement of Extreme-Pressure
Properties of Lubricating Fluids (Four-Ball Method)

BDS 13948
ASTM D 2266
Standard Test Method for Wear Preventive Characteristics of
Lubricating Grease (Four-Ball Method)

ASTM D 4172
Standard Test Method for Wear Preventive Characteristics of
Lubricating Fluid (Four-Ball Method)

BDS 13727
ASTM D 2896
Standard Test Method for Base Number of Petroleum Products by
Potentiometric Perchloric Acid Titration

ISO 760
Determination of water -- Karl Fischer method (General method)

BDS 14627
ASTM D 2983
Standard Test Method for Low-Temperature Viscosity of Lubricants
Measured by Brookfield Viscometer
.

EN ISO 3405
Petroleum products -- Determination of distillation characteristics at
atmospheric pressure

EN ISO 4264
Petroleum products -- Calculation of cetane index of middle-distillate
fuels by the four-variable equation
6/12

ISO 9120
ASTM D 3427
Petroleum and related products -- Determination of air-release
properties of steam turbine and other oils -- Impinger method.

BDS 16564
ASTM D 3829
Standard Test Method for Predicting the Borderline Pumping
Temperature of Engine Oil.

ASTM D 4310
Standard Test Method for Determination of Sludging and Corrosion
Tendencies of Inhibited Mineral Oils

ASTM D 2893
Standard Test Method for Oxidation Characteristics of Extreme-
Pressure Lubrication Oils

BDS 13119
Additized Petroleum Oils. Test Method for Determination of Oxidation
Stability.

ASTM 4927
Standard Test Methods for Elemental Analysis of Lubricant and
Additive Components—Barium, Calcium, Phosphorus, Sulfur, and
Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

EN ISO 8754
Petroleum products -- Determination of sulfur content -- Energy-
dispersive X-ray fluorescence spectrometry.

ASTM 4951
Стандартен тест метод за определяне на присадки от
елементите в смазочни масла чрез атомно емисионен
спектрометър с индуктивна свързана плазма.
7/12
BDS 14147
ASTM 5293
Standard Test Method for Apparent Viscosity of Engine Oils and
Base Stocks Between –5 and –35 Degree C Using Cold-Cranking
Simulator

BDS 8088
ASTM D 5800
Standard Test Method for Evaporation Loss of Lubricating Oils by the
Noack Method
.

BDS 12287
Greases. Determination of Endurance Limit.

BDS16749
Chemical Products. Test method for Determination of pH of Aqueous
Solutions by Potentiometric Titration
8/12

BDS 17248
Lubricants with Polymeric Additive. Test Method for Determination of
Shear Stability.

DIN 51589 –1
BDS 17249
Determination of water separation ability of lubricating oils and low-
flammability fluids after contact with steam

EN 60156
Insulating Liquids - Determination of the Breakdown Voltage at
Power Frequency

IEC 60247
Insulating liquids Measurement of relative permittivity, dielectric
dissipation factor (tan) and d.c. resistivity.
9/12

IEC 60666
Detection and determination of specified additives in mineral
insulating oils.

EN 60814
Insulating liquids. Oil-impregnated paper and pressboard.
Determination of water by automatic coulometric Karl Fischer titration

EN 61125
Unused hydrocarbon-based insulating liquids. Test methods for
evaluating the oxidation stability

EN ISO 2160
ASTM D 130
Petroleum products -- Corrosiveness to copper -- Copper strip test.

ISO 3733
Petroleum products and bituminous materials -- Determination of
water -- Distillation method

ISO 3987
ASTM D 874
Petroleum products -- Lubricating oils and additives -- Determination
of sulfated ash

ISO 5662
DIN 51353
Petroleum products -- Electrical insulating oils -- Detection of
corrosive sulphur

EN ISO 6245
ASTM D 482
Petroleum products -- Determination of ash
.
10/12
ISO 6615
Petroleum products -- Determination of carbon residue -- Conradson
method

COMECON Standard
Crude oil, petroleum products and additives. Test method for
determination of the contents.

BDS 6733
Greases. Test method for determination of colloidal stability.

BDS 8563
Automotive brake fluids. Test methods.

BDS 9018
Greases. Test method for determination of total particulate matter.

BDS 9601
Petroleum lubricants. Determination of sediments in artificially aged
lubricants.

BDS 9779
Petroleum lubricants. Determination of Phosphorus contents.

BDS 5747
Petroleum lubricants. Determination of corrosiveness against metals.

BDS 10126
Coolants antifreezes

BDS 14348
Lubricating oils. Determination of storage stability and compatibility.

BDS 14370
Lubricating oils. Determination of corrosion resistance.

BDS 14443
Greases. Determination of water influence.

BDS 14843
Metalworking fluids. Determination of emulsion stability.

BDS 14887
Metalworking fluids. Determination of foaming tendencies of
emulsions and solutions.

BDS 14912
Metalworking fluids. Determination of corrosion resistance of
emulsions and solutions.

BDS 15014
Metalworking fluids. Determination of emulsification time.
11/12
List of Test Methods not Included in the Scope of Accreditation

BDS 9781
ASTM D 5182
Standard Test Method for Evaluating the Scuffing Load Capacity
of Oils (FZG Visual Method)

ISO 22241-2
Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test
methods (elemental contents)

ISO 5661
ASTM D 1218
Petroleum products -- Hydrocarbon liquids -- Determination of
refractive index

ASTM D 7042
Standard Test Method for Dynamic Viscosity and Density of
Liquids by Stabinger Viscometer (and the Calculation of
Kinematic Viscosity)

ASTM D 4052
Standard Test Method for Density, Relative Density, and API
Gravity of Liquids by Digital Density Meter
12/12

ISO 22241-2
Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test
methods (Contents of aldehydes, biuret, phosphates)

You might also like