Professional Documents
Culture Documents
Mei 2013
DESCRIPTION APPLICATION
PRODUCT DATA
SURFACE PREPARATION
Type : Water based acrylic
Color : As shown in the color card The concrete surface to be coated should be clean, dry, sound,
Finish : Matt and free from dust, dirt, mud, grease and loose material.
Solid by volume (mixture) : 47 % Age of concrete must be at least 28 days and completely cured.
Specific gravity (mixture) : 1.20 To ensure good adhesion, the surface to be etched with
Material consumption : 2.0 m/kg (200 microns / three CLEANOL - F as the acid etching.
coats included quartz sand) Allow a further 30 minutes to ensure the reaction is complete.
Drying time : Wash overall with fresh water to thoroughly clean the surface
o
- Surface dry = 10 minutes ( 30 C ) and allow to dry prior to apply TENNOKOTE TNK - 1000 WA.
o
- Hard dry = 2 hours ( 30 C )
Packaging : 5 kg, 22.5 kg
Storage stability : One year if stored cool and dry
RECOMMENDED COATING SYSTEM
and in original not opened
boxes ( Do not store below
• Primer coat : TENNOKOTE TNK – 1020 WA
freezing point )
(for asphalt surface)
• Top coat : TENNOKOTE TNK – 1000 WA
First Aid :
Notes :
The technical details and recommendations contained in this technical data sheet are given to assist our customers and correspond to the best of our knowledge
and experience correct at the date printing. Anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application in
every case.
The company reserves the right to modify data without notice. The data should only be used after checking with our nearest office to ensure that they are still
valid. This Technical data sheet is made without guarantee since the conditions of use are beyond our control.
2of2/33.TNK - 1000 WA.doc