Professional Documents
Culture Documents
Tentamen Vermogenslelektronica
30 June 2006
Remarks:
Before every part of a problem the maximum rating that can be obtained is indicated (max 300)
First solve the problems for you self on a separate piece of paper and make a neat version
subsequently.
Always show the formulae that are used to make the calculations.
(80) PROBLEM 1
In the ZVS resonant -switch dc-dc converter of Fig.1, Vd = 40V; Io varies in the range 4-20 A.
Calculate the theoretical maximum value of the switch voltage rating
Lr iL Lf io ~~ I o
D
+ +
vd D Cf vo
_ + v _ _
c
Fig.1
(30) 1.2 Calculate the theoretical maximum value of the switch voltage rating
(20) 1.3 Draw the corresponding circuit states for each time interval of the converter operation
(30) 1.4 Make an comparison of ZCS and ZVS topologies for resonant switch topologies
(110) PROBLEM 2
In the three phase square wave inventer consider the load to be balanced and purely resistive with a
load neutral n.
(30) 2.1 Draw the steady state waveforms of voltage Van and current ia, ida+ and id.
(20) 2.2 Repeat the problem 2.1 by assuming that the load is pure inductive
(30) 2.3 Describe theoretically the ripple in the inverter output (3 phase)
(30) 2.4 Draw the practical realization for a three level inverter and explain its operation
(110) PROBLEM 3
(20) 3.1 Draw the twelve pulse converter arrangement scheme and give an explanaition. What is
the transformer ratio for both secondary windings ?
(30) 3.2 Sketch the course of idealized waveforms of twelve pulse converter assuming Ls = 0.
(20) 3.4 Describe the control of the HVDC converters and the show in the Vd -Id plane the point
of operation of HVDC system. Explain why converter works in rectifier and inverter
mode and which of them controls the current .
(20) 3.5 Space vector: what is the relation between different Park (Clark) transformation
variants and which of them is power invariant .