You are on page 1of 3

MAXIFORCE Air Lifting Bags

Maximum Force
Where You Need It Most!

durability, flexibility and chemical resistance.


Maxiforce was the first Kevlar reinforced lift
The Maxiforce Air Lifting Bag is a thin, bag.
strong, molded envelope. It is made
from a Neoprene covered Aramid 6. Surface: Small molded raised dimples
reinforcement, and has the power to lift, 2. Capacity: Does the height/weight provide an interlocking surface for stacking
move, or shift weights up to 74 tons. capacity match the task? Non-emergency 2 lift bags. Once again Maxiforce was the first
applications may only require one or two with an interlocking surface. Those larger
But there’s more to a lifting bag system sizes. Emergency Service providers need a “cleated” surfaces on other bags are not well
than the bag itself. The control system variety of capacities. suited to easy placement and should be
and components play a critical role in avoided. Remember, it’s not the size of the
successful lifting bag use. Unlike other 3. Shape: Match the shape of the bag to dimple, it’s how many per square inch.
lifting bag systems, Paratech the contact area of the load to maximize the
manufactures all of its major control bags capacity. Use rectangular shaped bags 7. Positioning Eyelets: At least 2 on all
components. This assures the quality of against linear loads, on hills or inclines. Lift Bags with a 10 ton rating or higher. A
the lifting bag system from inflation to Square bags are great for stacking and flat must for rescue work. Allows for vertical
deflation. surfaces. Rescue crews should have both placement, safe retrieval and carrying.
square and rectangular. 8. Markings: Technical data is molded
What to look for when selecting a lift into the bag surface. Warnings are
4. Thickness: The thinner the lift bag the
bag system. better. The most notable feature of quality permanently labeled. The famous “X” marks
1. Safety: Maxiforce bags are extremely manufacturing is the ability to produce a the center of the load. Our “X” makes your
tough, made of Neoprene, embedded with thin, tough lifting bag. Maxiforce Air Lifting lift bags clearly visible on the television
three (3) full layers of Aramid fiber Bags range in thickness from 5/8” (1.6cm) coverage of your rescue.
reinforcement on each side, giving the bags to 1” (2.5cm). 9. Air Inlet: Brass with maximum pull
tremendous strength at full inflation. Each 5. Material: Neoprene with Aramid strength. The inlet is threaded to receive a
Air Lifting Bag has been subjected to a reinforcement comprise most of the Lift Bag brass inflation nipple. Why brass? No
stringent factory pressure test to assure materials. These materials provide strength, corrosion. Easy to repair.
maximum operator safety.
MAXIFORCE Offers More Features

Interlocking Raised Surface Highly Visible Center Marking Training Manuals Meet U.S. Military Specifications

Brass Inlet Fitting and Receiver Two Step Safety Locking Coupling High Visibility Pressure Gauge

The “Thinner” Lift Bag is a Better Lift Bag

Field Replaceable “Closed” Coupling Approvals, Listing and Standards.


Paratech’s Maxiforce Air Lifting Bags meet
10. Works Quietly: Completely silent in “Pressure creep” is minimized as air supply and exceed all known, recognized and
use. There are no engine sounds or loud is reduced. Maximum inlet pressure is 6000 published international standards* for the
mechanical noises when Maxiforce is used. psi and inlet fittings are available for all design, production and use of air lifting bags.
compressed air cylinders. These Standards and Listings include:
Dual Pushbutton Safety Relief and Control
Valve: This controller will “go anywhere.” It Inline Relief Valves: Designed to relieve European Emergency Service Standard
is compact and extremely portable. There over-pressurization and allow a lift bag to (Proposed)
are no protruding joysticks, no cumbersome remain inflated under a load. This is not National Coal Board (UK)
enclosure. simply a shut off valve. This valve will relieve NATO Stock Listings
excess pressure from an inflated bag caused National Defense Supply Listing
Rescue personnel can crawl into collapse by load shifts or temperature changes. ISO9001 Certified
areas without hindrance. Pushbuttons must CE (Europe)
be depressed for inflation or deflation. Air Hose: A full 3/8" (9.5mm) inside Department of Industrial Relations
Large, easy to read, color coded gauges. diameter in a wide range of colors. (Australia)
Built in relief valves and closed couplings for Couplings and nipples are field replaceable South African Board of Mine Safety
maximum safety. Available in single or dual using simple hand tools. Working pressure of Japan Standards Institute
outlets. 300 psi assures reliability. Hose stays flexible (JSI Compliance)
over the full operating temperature range of
Piston Regulator: Adjustable piston the lift bag. Available in a wide variety of * Standards established by a specific country
regulator is standard and can be preset to lengths. Closed couplings prevent air escape as a trade restriction are not included in the
operating pressure. Durability is unmatched. at disconnect (no blowing debris). above claim.
MAXIFORCE Components and Accessories

890351 Control Package

890300 Master Control Package


800200 Wheeled Air Cart With
Cylinders

890900 Dual Deadman Controller

895401 Pressure
Regulator, Piston Type

Left to Right: Single Safety Relief and Control with


bypass, Dual Safety Relief and Control, Industrial
Single Safety Relief and Control Valve 890490 Inline Relief Valve

Air Hoses
Colors: Red, Yellow, Black, Blue,
Green, and Gray
Lengths: 16, 32 and 50 ft

800400 Manual Foot Pump

890729 22 Piece Pneumatic Component and Adapter Kit

890554 Ratchet Belt - 25 ft

You might also like