Professional Documents
Culture Documents
Manufacturing, Inc.
Intermediate Pivots
019 – ¾” Offset I-10
L019 – ¾” Offset for lead-lined door I-10
019-1.5 – 1-½” Offset I-10
Parts
¾” Offset Screw Packs – Specify the following when ordering:
RABBET
•
• Finish
• Door material & frame material
• Example: 0195-SCR-US32D x MDMF
FRAME STOP
•
C • – Extended
L OF DOOR
spindle for bottom pivot is provided when
additional clearance is required between the
CASED OPENING FRAME
Meets or exceeds
0519 – Pocket Door Pivot ANSI C07611
Standard Features
• Pivot point is located inside the frame
• Allows door to swing into a pocket in the frame at a right angle
• When the door is in the pocket, it is completely clear of the door
Options
• SEC – Security fasteners
Standard Features
• Pivot point is located inside the frame
• Allows door to swing into a pocket in the frame at a right angle
• When the door is in the pocket, it is completely clear of the door
Options
• EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners
- 1-1/16”
- Door leaf mortises into bottom of door
• Handed – Specify LH or RH
7-1/14”
• Maximum door load - 300 pounds
• Maximum door width – 42” 3/16”
• Standard 2-13/16” 2-13/16” 3/8”
Options
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard)
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
• B – Bottom pivot only (no top pivot)
• Standard
1-3/16”
• Heavy duty bearings 5-1/8”
• Stainless steel base material
Options
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard)
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
• B – Bottom pivot only (no top pivot)
-
-
1 1/4”
Door leaf mortises into bottom of door 5-1/4”
• Handed – Specify LH or RH
• Maximum door load – 1,750 pounds
• Standard 2-3/8” 1/2”
Options
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard)
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
• B – Bottom pivot only (no top pivot)
• Standard
• Heavy duty bearings 3/16”
Options 1-1/4”
- 1-1/8”
1-1/16”
- Door leaf mortises into bottom of door
• Handed – Specify LH or RH
• Maximum door load – 450 pounds
• Maximum door width – 48” 4-3/4”
• Standard
• Heavy duty stainless steel needle bearings
5-1/2”
Options 3/8”
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard) 1-1/8”
Meets or exceeds
Options 5”
Meets or exceeds
-
- Door leaf mortises into bottom of door
• Handed – Specify LH or RH 5”
Options
• EXTS - Extended Spindle on bottom pivot 9-5/8”
2-13/16” 5/16”
2-13/16”
1-3/16”
• Surface mounts to the face of the frame header and face of the door
• Matches pivot point of a standard 4-½” butt hinge 6 1/4”
• Non-handed
• Maximum door load - 300 pounds
• 1 1/2”
• For ⅛” inset door with ¾” offset
5 9/16” 4 3/8” 1 3/4”
Options
3/16”
• SEC – Security fasteners
• Standard
• Heavy duty stainless steel needle bearings
• Stainless steel base material
Options
• EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners
Standard Features
• Provides electrical power transfer from the frame to the door
- Large inrush current
- (2) 18 AWG Wires 5/16”
Options
• EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners
Standard Features
• Provides electrical power transfer from the frame to the door
- (8) 30 AWG Wires
• Mortises into side jamb and hinge edge of door
• Handed – Specify LH or RH 5”
• For use with 1-½” offset pivot sets
• Standard
1 1/8” 5/16”
• Heavy duty stainless steel needle bearings 5”
Options
• EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners
Standard Features
• Provides electrical power transfer from the frame to the door 5/16”
Options
• EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners
5/16”
Standard Features
• Concealed door position monitor switch included
5”
• Mortises into side jamb and hinge edge of door
• Handed – Specify LH or RH
• For use with ¾” offset pivot sets
• Standard 5”
1 1/8”
5/16”
• Heavy duty stainless steel needle bearings 1 1/8”
Options
• SEC – Security fasteners
Standard Features
• Provides electrical power transfer from the frame to the door 5/16”
• Handed – Specify LH or RH
• For use with ¾” offset pivot sets
• Standard 1 1/8”
5/16”
1 1/8”
• Heavy duty stainless steel needle bearings
4-1/4”
• Stainless steel base material
Options
• EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners
Options
• SEC – Security fasteners
1-1/16”
Options
• SEC – Security fasteners
• Non-handed
• Pivot set is centered into the door thickness 1”
Options 5-29/32”
• Can be used with ABH® Rescue Hardware – see Section “J” 2-3/16”
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard) 1/4”
2 5/8” 1/4”
Options 1 1/4”
Options 4 3/8”
• Can be used with ABH® Rescue Hardware – see Section “J” 1/4”
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard) 2-1/8”
Options 4”
1/4”
• Can be used with ABH® Rescue Hardware – see Section “J” 1 3/4”
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard) 1 1/4”
Standard Features
•
- Frame leaf mortises into header
- Door leaf mortises into top of door 1 5/16”
- 5-15/16”
1/4”
1 3/4”
1 1/4”
Options
• Can be used with ABH® Rescue Hardware – see Section “J”
• EXTS - Extended Spindle on bottom pivot (up to 2” longer than standard)
• SEC – Security fasteners
• EZ – EZ Connect Molex® Connectors for installation ease
• Pivot point must be plumb with pivot point at the bottom of door 5 29/32”
1/4”
1”
Options
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
• Non-handed 7/8”
• Pivot point must be plumb with pivot point at the bottom of door 1/4”
4 3/8”
1”
Options
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
• Heavy Duty
• Jamb leaf mortises in header
• Door leaf mortises into top of the door 1/4”
1 1/4”
Options
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
1 1/4”
Options
• EXTP - Extended Pin on top pivot (up to ¾” longer than standard)
• SEC – Security fasteners
Standard Features
• Provides electrical power transfer from the frame to the door
- (8) 30 AWG Wires 7/8”
Options 5-29/32”
1/4”
Standard Features
• Provides electrical power transfer from the frame to the door
- (8) 30 AWG Wires 1 5/16”
• Heavy duty
6 3/4”
• Mortises into header and top of the door
• Dress plate provided for jamb portion
• Non-handed 1/4”
Options 5-15/16”
1/4”
Standard Features
• Provides electrical power transfer from the frame to the door
- (8) 30 AWG Wires
1”
• Extra heavy duty
• Mortises into header and top of the door 6 3/4”
Options 9/32”
1/4”
•
5-15/16”
EZ – EZ Connect Molex® Connectors for installation ease
• SEC – Security fasteners 1 1/4”