Professional Documents
Culture Documents
Temperature Control: Sisalation® has proved Insulation maintains a constant and comfortable temperature
R THE BES
FR430
in a building by preventing heat transfer between indoor and
effective and beneficial in building in the comfort
N FO
R(m-2V.ak)lu/we
T
factor, keeping the home and workplace cooler in summer outdoor climates, keeping the heat in during winter and out
DESIG
NCE
and warmer in winter. during summer.
ERM
STA
AL RESI
TH
Thermal Resistance: R-Values (m².K)/W or
thermal resistance is determined by the overall Sisalation®
roofing or wall system design. (Visit the Sisalation® website
for typical applications, calculations and advice.)
Sisalation®
Fire: Sisalation® fire retardant products have been
tested by Firelab and have a fire performance
classification of B/B1/2/H&V-SP&USP - with and without
sprinklers.
Energy Efficient: Sisalation® is totally compliant Sisalation® FR430 is suitable for use in industrial and commercial
with the requirements for thermal insulation applications as an under-roof and side-cladding membrane in buildings
products as specified by the Energy Efficiency Standards, designed with and without sprinklers. This is in accordance with
SANS 10400 XA. SANS 10400 Part T. (See Firelab Test Report: FTC 10/174a).
75 Richard Carte Road, Mobeni, Durban, South Africa 4052
- Kraft
This combination makes Sisalation® an excellent barrier to
- Reinforcing Scrim heat flow via radiation.
PRODUCT WARNING
PHYSICAL PROPERTIES • All information used in this publication is correct at time FIRE PERFORMANCE CLASSIFICATION
Minimum Value of going to print and is based on our experience and given • Part 5 - Non combustiblity at 750˚C
Tensile strength (kN/m) - in good faith. • Part 10 - Fire propagation properties using 7,4 metre
Longitudinal direction 15 • Afripack Coatings reserves the right to change product inverted channel tunnel test
Transverse direction 9 specifications without notification. • Part 11 - Fire propagation properties using the large
Water vapour permeance, g/(s.MN) <0.002 • The quality of Sisalation® products is in accordance scale application facility (with and without sprinklers)
Burst strength kPa 990 with SANS 10400 Building Standards on condition for horizontal and vertical applications.
Emissivity of foil surface <0.05 that the product has been correctly installed as per the • B/B1/2/H&V-SP&USP
Nominal grammage g/m2 251 manufacturer’s instructions and not damaged by after (with and without sprinklers)
Category (Double sided reinforced membrane) A trades or roof deterioration, water leaks, exposure to acids
Tested in accordance with SANS 1381-4:2009 and alkali’s and the like.