The document describes the properties of stainless steel grades -02 EN 10088-2, -00, -62 EN 10088-3, -14, -52 EN 10283, -02 ASTM A 240M, -00, -02 ASTM A 276, and UNS S31803, -14, -52 ASTM A 890M, UNS J92205. It provides the chemical composition in weight percent and mechanical properties including tensile strength, proof strength, elongation and impact strength according to various standards. It also lists additional requirements for condition -02, -82, -52, -83 and -62 as well as the physical properties such as modulus of elasticity, density, thermal conductivity, specific
The document describes the properties of stainless steel grades -02 EN 10088-2, -00, -62 EN 10088-3, -14, -52 EN 10283, -02 ASTM A 240M, -00, -02 ASTM A 276, and UNS S31803, -14, -52 ASTM A 890M, UNS J92205. It provides the chemical composition in weight percent and mechanical properties including tensile strength, proof strength, elongation and impact strength according to various standards. It also lists additional requirements for condition -02, -82, -52, -83 and -62 as well as the physical properties such as modulus of elasticity, density, thermal conductivity, specific
The document describes the properties of stainless steel grades -02 EN 10088-2, -00, -62 EN 10088-3, -14, -52 EN 10283, -02 ASTM A 240M, -00, -02 ASTM A 276, and UNS S31803, -14, -52 ASTM A 890M, UNS J92205. It provides the chemical composition in weight percent and mechanical properties including tensile strength, proof strength, elongation and impact strength according to various standards. It also lists additional requirements for condition -02, -82, -52, -83 and -62 as well as the physical properties such as modulus of elasticity, density, thermal conductivity, specific
C Si Mn P S N Cr Ni Mo -02 EN 10088-2 ≤0,030 ≤1,00 ≤2,00 ≤0,035 ≤ 0,015 0,10 - 21,00 - 4,50 - 2,50 - -00, -62 EN 10088-3 0,22 23,00 6,50 3,50 Steel No. 1.4462 -14, -52 EN 10283 ≤0,030 ≤1,00 ≤2,00 ≤0,035 ≤ 0,025 0,12 - 21,00 - 4,50 - 2,50 - Steel No. 1.4470 0,20 23,00 6,50 3,50 -02 ASTM A 240M ≤0,030 ≤1,00 ≤2,00 ≤0,030 ≤ 0,020 0,08 - 21,0 - 4,5 - 2,5 - -00, -02 ASTM A 276 0,20 23,0 6,5 3,5 UNS S31803 -14, -52 ≤0,03 ≤1,00 ≤1,50 ≤0,04 ≤ 0,020 0,10 - 21,0 - 4,5 - 2,5 - ASTM A 890M 0,30 23,5 6,5 3,5 UNS J92205
2.2 Mechanical Properties
Standard EN 10088-2 EN 10088-3 EN 10283 Shape Sheet, strip bar, forgings castings Thickness, [mm] -6 (6) - 12 (12) - 75 - 160 - 150 Tensile strength 660 - 950 660 - 950 640 - 840 650 - 880 600 min. Rm at RT [MPa] Proof strength 480 min. 460 min. 460 min. 450 min. 420 min. Rp0,2 at RT [MPa] 20 min. 20 min. 25 min. 25 min. 20 min. Elongation, A5 [%] Impact strength 90 min. (long.) 90 min. (long.) 100 min. (long.) 30 min. KV +20°C [J]
Standard ASTM A 240M ASTM A 276 ASTM A 890M
Shape Sheet, strip bar castings
Tensile strength 620 min. 620 min. 620 min. Rm at RT [MPa] Proof strength 450 min. 448 min. 415 min. Rp0,2 at RT [MPa] 25 min. 25 min. 25 min. Elongation, A5[%] Hardness, [HBW] 293 max. 290 max.
www.alfalaval.com
Confidential – inpopki / 2019-05-02
2.2.1 Additional Alfa Laval Requirements Condition -02 -82 -52, -83 -62 Thickness, [mm] - 100 - 100 - 100 - 100 Tensile strength 660 - 860 660 - 860 660 - 860 660 - 860 Rm at RT [MPa] Proof strength 450 min. Rp0,2 at RT [MPa] 25 min. 25 min. 25 min. Elongation at RT, A5 [%] Hardness, [HBW] 200 - 260 200 - 260 200 - 260 200 - 260 Impact strength KV 100 min. 100 min. 70 min. - 10°C [J] Ferrite content, [%] 45 - 70 45 - 70 40 - 60 45 - 70
2.3 Physical Properties
Temperature, °C 20 100 200 300 Modulus of elasticity E [GPa] 190 180 175 3 Density [g/cm ] 7.7 Thermal conductivity [W/m°C] 19 21 Specific heat capacity, c [J/kg°C] 460 500 Thermal expansion (20 - 200 °C) approx. 14 -6 x10 [m/m°C] (20 - 300 °C) approx. 14.5