Professional Documents
Culture Documents
Page 1 of 4
Aftercooler - Install
SMCS Code: 1063-012
Installation Procedure
Illustration 111
2. Temporarily secure the bottom seal with tape. Do not use RTV , adhesive, or lubricants to keep the
seals in place.
Illustration 112
3. Use two people and install aftercooler core (15) to the engine. The weight of the aftercooler is 36 kg
(80 lb).
5. Inspect the bottom seal in order to ensure the correct seating in the recess area.
file://C:\SIS\TMP\sis5511prt.html 9/8/2005
Copyright 1991, 2005 Caterpillar Inc. All Rights Reserved. Page 2 of 4
Illustration 113
7. Inspect the upper seal in order to ensure the correct seating in the recess area.
9. Install bolts (12) on the bracket for the turbocharger oil line.
Illustration 114
Tightening Sequence
11. Torque bolts (13) again in numerical order to 47 N·m (35 lb ft).
file://C:\SIS\TMP\sis5511prt.html 9/8/2005
Copyright 1991, 2005 Caterpillar Inc. All Rights Reserved. Page 3 of 4
Illustration 115
Illustration 116
Illustration 117
17. Install bolts (6) on the elbows at each end of the aftercooler.
file://C:\SIS\TMP\sis5511prt.html 9/8/2005
Copyright 1991, 2005 Caterpillar Inc. All Rights Reserved. Page 4 of 4
Illustration 118
Illustration 119
Note: Refer to the Operation and Maintenance Manual for all fluid capacities and the proper filling
procedures.
End By:
a. Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
file://C:\SIS\TMP\sis5511prt.html 9/8/2005