Professional Documents
Culture Documents
com
Single-phase
Portable Pumps
LB / HS / NK / LSC / LSP / FAMILY
SINGLE-PHASE PORTABLE
DEWATERING PUMPS
Tsurumi single-phase portable dewatering pumps are compact and lightweight, so they are very
easy handle and carry. Available in an extensive lineup of motor outputs ranging from 0.1 to
2.2kW, these pumps are suited for a wide range of applications besides general pumping and
drainage, including slurries, residues and household uses.
Though compact in size, these pumps pack a host of proprietary technologies that Tsurumi has
tested and proven over many years, including the anti-wicking cable, inside mechanical seal with
silicon carbide face and Oil Lifter,* etc. Additionally, key components that are prone to wear are
made of durable materials and pumps as a whole are designed for continuous duty. For these
reasons, Tsurumi single-phase portable pumps are a popular choice at civil engineering,
construction and other work sites that demand high reliability.
* excluding FAMILY-series
Tsurumi has been manufacturing construction dewatering pumps for more than 40 years. This has
led to numerous technologies and know-how for improving the durability and maintainability of
pumps in the rental and construction markets where rugged work environments demand
heavy-duty specifications. All of Tsurumi’s pumps are designed and built to be durable and reliable
so as to serve users dependably.
LB LSC
-Typical Pumps- -Residue Drainage Pump-
HS LSP
-Multi-field Use Pumps- -Free-positioning Residue Drainage Pump-
NK FAMILY
-Larger Output Pumps- -Domestic Pumps-
01 TS U R U M I P U M P T SURUM I PUM P 02
Structure
1 1
1
6
2
9
2
9 2
4
3
4
3
4
3
5
5 7
8
8
LB HS LSC
1 Anti-Wicking Cable Entry 5 V-Ring / Oil Seal (excluding HS(Z/R)2.4S, FAMILY)
Prevents water incursion due to capillary wicking should the power cable be damaged or the end submerged. Used as a “Dust Seal”, they protect the mechanical seal from abrasive particles.
03 TS U R U M I P U M P T SURUM I PUM P 04
Feature Automatic Operation
The automatic model only operates when sufficient water is present. It not only reduces power consumption
but also extends the life of wear parts of the pump as it eliminates dry-running that causes early wear-out.
Selection Table Submersible
Non
Submersible Submersible
HSZ FAMILY-A
05 TS U R U M I P U M P T SURUM I PUM P 06
LB -Typical Pumps- Performance Curves
Standard and Automatic Models have the identical performance.
L
B
Total Head (m)
-1
* excluding LB-1500
50
L
12 12
0
B
-1
LB
L
50
B
LB-1500
-8
0
-8
00
0
L
0(
(A
L
B
8 8
A
B
-4
)
Automatic
)
-4
80
80
(A
LB-800A
(A
)
)
4 4
LB-480
0 0
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
Capacity (m3/min) Capacity (m3/min)
• Flow-thru Design
Dimensions
• Anti-wicking Cable Entry
• Motor Protector LB LB-A
Unit: mm
• Dual Inside Mechanical Seal A A
A1 A1
• Oil Lifter [ Patented] Model A A1 B H W1
Starting
Water
H
B
H
B
Level
Discharge Motor Starting Solids Dry Cable
Model Phase Weight
Bore Output Method Passage Length C.W.L.
W1
W1
mm kW mm kg m
Cuttable to
Desired Length
Pump continues to run When the water surface Pump stops in about When the water level
It is possible to set a lower starting
while the electric probe falls below the electric one minute after the rises to contact the
water level by using an extension
remains submerged. probe, timer starts to water level falls. electric probe, pump
probe (optional accessory).
count about one starts operating again. The starting water level is
minute. adjustable because the extension
probe can be cut to the desired
length as it is made of coil spring.
The process is repeated.
07 TS U R U M I P U M P T SURUM I PUM P 08
HS -Multi-field Use Pumps- Performance Curves
Standard and Automatic Models have the identical performance.
H
S
S
(Z
(Z
S
continue pumping the water level goes down to 1mm. Additionally, the discharge direction is selectable
)2
(Z
)3
.7
.7
2
5S
between vertical and inclined, which prevents folding or bending of the discharge hose.
.7
5S
5
8 8
S
S
S
HS
HS
D
* excluding HSR
H
2
2.
R2
.5
S
S
R2
5
(Z
(Z
5S
5 S
.4S
)2
)2
.4S
.4
.4
Slurry 4 4
S
HSD2.55S
Automatic Residue
186
162
• Cable Clip
D
D
• Rubber / Resin-made Stand 241
227
A 271
• Agitator ( HS/HSZ/HSD) A
Range
• Multi-directional Hose Coupling ( HSR)
90
Level
Start
MAX. FL2
Range
Level
Stop
391
H
H
282
40
C.W.L. C.W.L.
MIN. FL1
171
B
112
W1
105
Discharge Motor Starting Solids Dry Cable Unit: mm
Model Phase Weight
Bore Output Method Passage Length
Model A B D H F FL1 FL2
mm kW mm kg m
HS2.4S 241 158 184 328 - - -
HS2.4S 50 0.4 Cpacitor Run 7 11.3 5 HS2.75S/HS3.75S 285 218 184 394 - - -
HS HS2.75S 50 0.75 Cpacitor Run 7 16.4 5 HSZ2.4S 241 158 184 328 340 120 385
HSZ2.75S/HSZ3.75S 285 218 184 394 370 150 475
HS3.75S 80 0.75 Cpacitor Run 7 16.8 5
Pump starts operating when the water Pump keeps running while the float When the water level lowers to the
level rises to a preset level. switch remains on. preset level, pump stops operating.
09 TS U R U M I P U M P T SURUM I PUM P 10
NK -Larger Output Pumps- Performance Curves
The NK-series is a submersible single-phase portable drainage pump having a larger output motor. Though S.S. 3000min-1 S.S. 3600min-1
28 28
it is a single-phase unit, the pump has the durability equivalent to three-phase drainage pumps, since the
wear parts are made of abrasion-resistant materials. The slim design allows the pump to be placed in a
confined space.
20 20
NK
NK
NK
NK
4-2
4-2
3-1
3-1
2
2
5
5
• Side Flow Design
• Anti-wicking Cable Entry 0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
• Motor Protector Capacity (m3/min) Capacity (m3/min)
• Dual Inside Mechanical Seal
• Oil Lifter [ Patented] Dimensions
• V-ring / Oil Seal
• Cable Clip* Unit: mm
* excluding NK3-22L
Model A B D H W1
D
NK4-22 240 546 243 614 80
A
NK3-22L 236 601 216 669 120
H
Model Phase Weight
B
Bore Output Method Passage Length
mm kW mm kg m
C.W.L.
NK3-15 50 1.5 Cpacitor Start 8.5 29 10
W1
Cpacitor Start
NK4-22 50 2.2 Single + Cpacitor Run
8.5 29 10
Cpacitor Start
NK3-22L 80 2.2 8.5 40 10
+ Cpacitor Run
• Male threaded coupling for pipe connection available on special request
• Weights excluding cable
11 TS U R U M I P U M P T SURUM I PUM P 12
LSC -Residue Drainage Pump- LSP -Free-positioning Residue Drainage Pump-
The LSC pump is a submersible single-phase portable residue drainage pump. The specially designed The LSP pump is a single-phase portable self-priming residue drainage pump incorporating a submersible
bottom plate enables the pump to drain down to 1mm water level. It has a swing check valve that prevents motor. The suction attachment, supplied as standard, makes the pump drain water down to floor level. The
reverse-flow of the sucked water when the pump stops its operation. The rubber stand protects the floor pump is equipped with a siphon breaker mechanism that prevents reverse-flow when the pump stops its
surface from scratching. The discharge direction is selectable between vertical and inclined, which operation. It is lightweight and easy to carry, as the major components are made of aluminum alloy and
prevents folding or bending of the discharge hose. synthetic rubber. Since it incorporates a submersible motor, there is absolutely no problem even it is
submerged in water.
LSC1.4S LSP1.4S
Discharge Motor Starting Dry Cable Performance Curves Suction x Motor Starting Max. Max. Max. Dry Cable
Model Bore Output
Phase
Method Weight Length Model Discharge Output
Phase
Method Head Capacity Vacuum Weight Length
Bore 50/60Hz 50/60Hz
S.S. 3000min-1
mm kW kg m 13 mm kW m L/min kPa(mmHg) kg m
LSC1.4S 25 0.48 Single Cpacitor Run 12 5 LSP1.4S 25 x 25 0.48 Single Cpacitor Run 6.9 / 7.8 50 / 55 -73.3 (-550) 16.5 5
10
• Male threaded coupling for pipe connection available on special request LS • Weights excluding cable
• Weights excluding cable C
Total Head (m)
1.
4S
Dimensions 5
Dimensions
300
0
0 0.1 0.2
Capacity (m3/min)
196
S.S. 3600min-1
13
26
5
10
LS
C 140
1.
Total Head (m)
4S
5
316
307
263
153
0
0 0.1 0.2
C.W.L.
Capacity (m3/min)
1
13 TS U R U M I P U M P T SURUM I PUM P 14
FAMILY -Domestic Pumps- Performance Curves
Standard and Automatic Models have the identical performance.
The FAMILY/FAMILY-A series are submersible single-phase portable drainage pumps. In addition to the S.S. 3000min-1 S.S. 3600min-1
8 8
25mm hose coupling, it also comes with an easy-to-attach 15mm hose coupling as a standard accessory.
7 7
The FAMILY-A pump with a cylindrical float switch reduces power consumption and extends operating life.
Moreover, it can be used as a residue pump and drain water to 1mm in depth by attaching the optional 6 F 6 F
w AM w AM
/o IL /o I
residue adapter to the pump casing. R Y-
es 12 R LY
es -1
5 id (A 5
witandin
witandin
(S
(S
A e
th g o
da
th g o
A
4 pt 4 d
ap
Re n fu
Re n f u
er
te
sidlly fl
sidlly fla
r
3 3
ueat & s
ue t & s
Ad moo
Ad moo
Automatic
2 2
ap th g
ap th gr
FAMILY-12 FAMILY-12A
ter roun
ter oun
1 1
• Flow-thru Design
d)
) d
• Anti-wicking Cable Entry 0 0
0 0.05 0.09 0 0.05 0.09
• Motor Protector Capacity (m3/min) Capacity (m3/min)
• Inside Mechanical Seal
Automatic Operation (FAMILY-A)
Option
• Residue Adapter 1 2 3
• Seawater-Resistant Coating
d H
157
157
15 250
201
25 256
d d
approx. 12 mm
Starting
Min. depth
Min. depth
Water Level
1 mm
H
H
224
224
164
Stopping
Water Level Residue Adapter
54
15 TS U R U M I P U M P T SURUM I PUM P 16
LB-A HSZ HSD HSR LSC LSP FAMILY-A
LB HS NK FAMILY
-Automatic- -Automatic- -Slurry- -Residue- -Residue- -Residue- -Automatic-
HS2.75S HSZ2.75S
LB-480 LB-800 LB-1500 LB-480A LB-800A HS2.4S HSZ2.4S HSD2.55S HSR2.4S NK3-15 NK4-22 NK3-22L LSC1.4S LSP1.4S FAMILY-12 FAMILY-12A
HS3.75S HSZ3.75S
50 50
Discharge Bore mm 50 50(80) 50 50(80) 50 50 50 80 25 15, 25
80 80
Impeller
High-chromium High-chromium Urethane High-chromium
Urethane Rubber Urethane Rubber Dcutile Cast Iron Urethane Rubber Glass-fiber Reinforced Resin
Cast Iron Cast Iron Rubber Cast Iron
PUMP
Dual Inside Mechanical Seals (with Oil Lifter) Dual Inside Mechanical Seals (with Oil Lifter) Inside Mechanical Seal
Shaft Seal
Silicon Carbide Silicon Carbide
Type Continuous-duty Rated, Dry-type Induction Motor Continuous-duty Rated, Dry-type Induction Motor
Output kW 0.48 0.75 1.5 0.48 0.75 0.4 0.75 0.4 0.75 0.55 0.4 1.5 2.2 0.48 0.1
Pole 2 2
Insulation E B E E B E
Motor Protector
(built-in) MTP CTP MTP CTP MTP CTP MTP CTP CTP MTP CTP MTP
420
Shaft 403 Stainless Steel 403 Stainless Steel 403 Stainless Steel 420 Stainless Steel
Stainless Steel
m 5 10 5 5 10 5 3
Cable
Chloroprene
PVC Rubber PVC PVC Chloroprene Rubber PVC
16.4 16.4
Dry Weight* kg 10.4 13.1 33 11 13.7 11.3 11.3 14 10.8 29 40 12 16.5 3.4 3.6
16.8 16.8
* Weights excluding cable
17 TS U R U M I P U M P T SURUM I PUM P 18
www.tsurumi-global.com
We reserve the right to change the specifications and designs for improvement without prior notice.
Your Dealer