You are on page 1of 4

1. Wall: Wall No.2 (0.9)m - Panel no.

226
1.1. Reinforcement:

 Type : RC wall
 Main reinforcement direction : 0°
Main reinforcement grade : B500B; Characteristic strength = 500.00 MPa
Horizontal branch of the stress-strain diagram
 Ductility class :B
 Bar diameters bottom d1 = 1.2 (cm) d2 =
1.2 (cm)
top d1 = 1.2 (cm) d2 = 1.2 (cm)
 Cover bottom c1 = 3.0 (cm)
top c2 = 3.0 (cm)
 Cover deviations Cdev = 1.0(cm), Cdur = 0.0(cm)

1.2. Concrete

Class : C30/37; Characteristic strength = 30.00 MPa


Rectangular stress distribution [3.1.7(3)]
 Density : 2501.36 (kG/m3)
 Concrete creep coefficient: 1.39
 Cement class :N

1.3. Hypothesis

 Calculations according to
: EN 1992-1-1:2004/A1:2014
 Method of reinforcement area
calculations : analytical
 Allowable cracking width
- upper layer : 0.40 (mm)
- lower layer : 0.40 (mm)
 Verification of punching : no
 Exposure
- upper layer : X0
- lower layer : X0
 Calculation type :
compression/tension
 Structure class : S1

1.4. Wall geometry

Thickness 0.20 (m)

Contour:
edge beginning end length
x1 y1 x2 y2 (m)
1 0.00 -0.90 8.27 -0.90 8.27
2 8.27 -0.90 8.27 0.00 0.90
3 8.27 0.00 0.00 0.00 8.27
4 0.00 0.00 0.00 -0.90 0.90

Support:
n° Name dimensions coordinates edge
(m) x y
0 linear 0.90 / 0.20 0.00 -0.45 —
0 linear 0.20 / 8.27 4.14 0.00 —
4 linear 0.90 / 0.25 0.00 -0.45 —
0 linear 0.90 / 0.15 8.27 -0.45 —
12 linear 0.90 / 0.50 8.27 -0.45 —
0 linear 0.20 / 8.27 4.14 -0.90 —
* - head present

1.5. Calculation results:

1.5.1. Maximum forces + reinforcement

Ax(+) Ax(-) Ay(+) Ay(-)

Provided reinforcement (cm2/m):


10.47 10.47 10.47 10.47
Modified required reinforcement (cm2/m):
8.53 8.53 5.39 5.39
Original required reinforcement (cm2/m):
8.53 8.53 5.39 5.39
Coordinates (m):
7.24;-0.90 7.24;-0.90 7.24;-0.90 7.24;-
0.90

1.5.2. Maximum forces + reinforcement

Ax(+) Ax(-) Ay(+) Ay(-)

Symbol: required area/provided area


Ax(+) (cm2/m) 8.53/10.47 8.53/10.47 8.53/10.47
8.53/10.47
Ax(-) (cm2/m) 8.53/10.47 8.53/10.47 8.53/10.47
8.53/10.47
Ay(+) (cm2/m) 5.39/10.47 5.39/10.47 5.39/10.47
5.39/10.47
Ay(-) (cm2/m) 5.39/10.47 5.39/10.47 5.39/10.47
5.39/10.47

SLS
Mxx (kN*m/m) 18.44 18.44 18.44 18.44
Myy (kN*m/m) 96.47 96.47 96.47 96.47
Mxy (kN*m/m) 0.58 0.58 0.58 0.58

Nxx (kN/m) 156.93 156.93 156.93 156.93


Nyy (kN/m) 322.46 322.46 322.46 322.46
Nxy (kN/m) -201.22 -201.22 -201.22 -201.22

ULS
Mxx (kN*m/m) 25.41 25.41 25.41 25.41
Myy (kN*m/m) 132.91 132.91 132.91 132.91
Mxy (kN*m/m) 0.78 0.78 0.78 0.78

Nxx (kN/m) 215.62 215.62 215.62 215.62


Nyy (kN/m) 441.60 441.60 441.60 441.60
Nxy (kN/m) -279.51 -279.51 -279.51 -279.51

Coordinates (m) 7.24;-0.90 7.24;-0.90 7.24;-0.90 7.24;-


0.90
Coordinates* (m) 16.67;10.23;3.30 16.67;10.23;3.30 16.67;10.23;3.30
16.67;10.23;3.30
* - Coordinates in the structure global coordinate system

3. Results - detailing
List of solutions:
Reinforcement: bars
Solution no. Reinforcement range Total weight
Diameter / Weight (kG)
1 - 244.86

Results for the solution no. 1


Reinforcement zones

Bottom reinforcement
Name coordinates Provided reinforcement At
Ar
x1 y1 x2 y2 f (mm) / (cm) (cm2/m)
(cm2/m)
1/1- Ax Main 8.27 -0.90 0.00 -0.00 20.0 / 30.0 8.53 <
10.47
1/2- Ay Perpendicular 8.27 -0.90 0.00 -0.00 20.0 / 30.0 5.39 <
10.47

Top reinforcement
Name coordinates Provided reinforcement At
Ar
x1 y1 x2 y2 f (mm) / (cm) (cm2/m)
(cm2/m)
1/1+ Ax Main 8.27 -0.90 0.00 -0.00 20.0 / 30.0 8.53 <
10.47
1/2+ Ay Perpendicular 8.27 -0.90 0.00 -0.00 20.0 / 30.0 5.39 <
10.47

4. Material survey
 Concrete volume = 1.49 (m3)
 Formwork = 7.44 (m2)
 Slab circumference = 18.34 (m)
 Area of openings = 0.00 (m2)

 Steel B500B
 Total weight = 244.43 (kG)
 Density = 164.18 (kG/m3)
 Average diameter = 18.2 (mm)
 Survey according to diameters:

Diameter Length Number of identical elements:


(m)
8 0.96 18
20 0.84 56
20 8.21 6

You might also like