Professional Documents
Culture Documents
825
GD825A-2 HORSEPOWER
Gross: 223 kW 298 HP / 2100 min-1
Net: 209 kW 284 HP / 2100 min-1
OPERATING WEIGHT
31655 kg
BLADE LENGTH
4.88 m
2
MOTOR GR ADER GD825A-2
PERFORMANCE
Blade Stability
Long Wheelbase & Short Turning Radius
EASY OPERATION
Optimized Hydraulic System
Rear Frame-mounted Cabin
RELIABILITY
Increase Uptime, Reduce Downtime
SERVICEABILITY
Electronic Display and Monitoring System
Easy Maintenance Design
Elevating Cab
COMFORT
Excellent Visibility
Spacious Interior
GD825A-2
HORSEPOWER Gross: 223 kW 298 HP/2100 min-1
Net: 209 kW 284 HP/2100 min-1
OPERATING WEIGHT 31655 kg
BLADE LENGTH 4.88 m
3
PERFORMANCE
Blade Stability
4
MOTOR GR ADER GD825A-2
EASY OPERATION
5
RELIABILITY
Sealed connectors
Main harnesses and controller are connected by sealed
connectors providing high reliability, water resistance, and
dust resistance.
6
MOTOR GR ADER GD825A-2
SERVICEABILITY
Elevating Cab
7
COMFORT
Excellent Visibility
8
MOTOR GR ADER GD825A-2
Spacious Interior
Storage space
The cab includes built-in storage space for personal items.
9
WORK EQUIPMENTS
Moldboard
4.88 m (16 ft) moldboard is standard for GD825A-2.
Optional 2 ft blade extensions for each sides are available for
boosting up haul road maintenance especially for soft rock
mine sites.
Ripper
Digs up hard material cannot be removed by the moldboard.
This ripper can accommodates up to 7 shanks.
10
MOTOR GR ADER GD825A-2
KOMATSU TOTAL SUPPORT
To keep your machine available and minimize operation cost Technical support
when you need it, Komatsu Distributor is ready to provide Komatsu product support service (Technical support) are de-
variety of support before and after procuring the machine. signed to help customer. Komatsu Distributor offers a variety
of effective services how much Komatsu is dedicated to the
Fleet recommendation maintenance and support of Komatsu machine.
Komatsu Distributor can study the customer’s job site and • Preventive Maintenance (PM) clinic
provide the most optimum fleet recommendation with de- • Oil & Wear analysis program
tailed information to meet all of your application needs when
you are considering to buy new machines or replace the Repair & maintenance service
existing ones from Komatsu. Komatsu Distributor offers quality repair and maintenance
service to the customer, utilizing and promoting Komatsu
developed programs.
Product support
Komatsu Distributor gives the proactive support and secures
the quality of the machinery that will be delivered.
Parts availability
Komatsu Distributor is available for emergency inquiry by the
customers for genuine, quality guaranteed Komatsu parts.
11
BRAKES ENGINE
ENGINE
TRANSMISSION AND
MAIN FRAME TORQUE CONVERTER
TRANSMISSION AND
TORQUE CONVERTER
SPECIFICATIONS
BODY TANDEM DRIVE
TANDEM DRIVE
HYDRAULIC SYSTEM FRONT AXLE
ENGINE
FRONT AXLE
TRANSMISSION AND
CAB
ENGINE REAR AXLE
TORQUE CONVERTER
TRANSMISSION AND
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu S6D140E REAR
Alloy steel, AXLE
heat treated, full floating axle.
Type . . . . . . . . . . . . . . . . . . . . .
WEIGHT
TORQUE (APPROXIMATE) CONVERTER Water-cooled,4-cycle,direct injection WHEELS, FRONT AND REAR
Aspiration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged TANDEM DRIVE
Number of cylinders . . . . . . . . . . . . . . . . . . . 6 - 140 mm x 165 mm WHEELS, FRONT AND REAR
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TIRES
TANDEM DRIVE 140 mm STEERING
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mm FRONT AXLE
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.24 L STEERING
ENGINE
Gross horsepower . . . . . . . . . . . . . . . . . . 223 kW 298 HP/2100 min-1
SERVICE
FRONT AXLE REFILL CAPACITIES BRAKES
TRANSMISSION
Full hydraulic orbit rool type steering AND control system with two
Net horsepower . . . . . . . . . . . . . . . . . . . . 209 kW 280 HP/2100 min-1 REAR AXLE
Maximum torque . . . . . . . . . . . . . . 1255 N∙m 128.0 kg∙m/1400 min-1 steering TORQUE
cylinders are directly
BRAKES CONVERTER actuated on the knuckle arm..
Torque rise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 % Minimum turning radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0 m
DIMENSIONS
REAR AXLE
Fan speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Max. 1686 min-1 Maximum FRAME
steering range,FRONT right or left . . . . . . . . . . . . . . . . . . . . . 50°
WHEELS, AND REAR
Air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-stage, dry-type Articulation
FRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TANDEM DRIVE 25°
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . 24 V with 50 A alternator
STANDARD
WHEELS, FRONT EQUIPMENT AND REAR FOR BASE
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 12 V, 200 MACHINE
Ah DRAWBAR
STEERING
DRAWBAR
ENGINE
FRONT AXLE
OPTIONAL
STEERING EQUIPMENT CIRCLE
TRANSMISSION AND
BRAKES
TRANSMISSION AND CIRCLE
TORQUE
REAR AXLE CONVERTER
Service brakes . . . Air-actuated, wet, multiple disc brakes on
TORQUE
BRAKES CONVERTER MOLDBOARD
ENGINE
FRAME four rear wheels. Sealed for adjustment-free
MOLDBOARD
WHEELS,
TANDEM
TRANSMISSION operation.
FRONT
DRIVE ANDAND REAR
The Komatsu HYDROSHIFT® Transmission utilizes planetary gears
Two, crossed brake lines.
and hydraulically
FRAME actuated, force-lubricated multipledisc clutches. BLADE
TORQUE RANGE
CONVERTER
Parking brake . . . Mechanical, dry, disc-type, mounted on
DRAWBAR
A single lever completes both speed shifting and direction changes.
Inching pedal allows precise finishing operation and smooth BLADEtransmission
STEERING
FRONT AXLE output shaft. Spring-applied and
RANGE
air-released.
machineDRAWBAR
starts. Eight forward and reverse speeds match all job HYDRAULICS
TANDEM DRIVE
requirements. Gearshift lock device prevents accidental machine CIRCLE
starts. Engine starts only when the shift lever is set in the park HYDRAULICS
BRAKES
REAR
ENGINE AXLE
position.
CIRCLE INSTRUMENT
FRONT AXLE
TRANSMISSION AND
MOLDBOARD
Travel speeds (at rated engine speed) INSTRUMENT
TORQUE
WHEELS,
FRAME CONVERTER
FRONT AND REAR
Gear Forward
MOLDBOARD Reverse CAPACITIES
REAR
Front Frame AXLE
Structure
(REFILLING)
BLADE RANGE
1st 4.0 km/h 4.3 km/h HeightTANDEM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAPACITIES
STEERING
DRAWBAR DRIVE (REFILLING) 400 mm
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 mm
2nd 5.4 km/h
BLADE RANGE 5.8 km/h WHEELS,
OPERATING FRONT WEIGHT AND REAR mm, 16 mm
(APPROXIMATE)
Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
HYDRAULICS
3rd 8.0 km/h 8.5 km/h Upper,FRONT
Lower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCLE
BRAKES
OPERATING AXLEWEIGHT (APPROXIMATE) 32 mm
4th 11.5 km/h
HYDRAULICS 12.2 km/h STEERING
DIMENSIONS
INSTRUMENT
5th 15.8 km/h 16.9 km/h MOLDBOARD
FRAME
REAR AXLE
DIMENSIONS
6th 21.4 km/h
INSTRUMENT 22.8 km/h BRAKES
STANDARD EQUIPMENT
CAPACITIES (REFILLING)
7th 31.3 km/h 33.4 km/h BLADE RANGE
DRAWBAR
WHEELS,
STANDARDFRONT AND REAR
EQUIPMENT
8th 44.9 km/h
CAPACITIES
ENGINE (REFILLING)47.9 km/h OPTIONAL
DrawbarFRAME EQUIPMENT
frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mm x 22 mm
OPERATING WEIGHT (APPROXIMATE)
TRANSMISSION AND HYDRAULICS
CIRCLE
STEERING
OPTIONAL EQUIPMENT
TORQUE CONVERTER
OPERATING WEIGHT (APPROXIMATE) DRAWBAR
DIMENSIONS
INSTRUMENT
MOLDBOARD
BRAKES
DIMENSIONS
TANDEM DRIVE CIRCLE
STANDARD EQUIPMENT
Oscillating welded box section . . . . . . . . . . . . . . 632 mm x 241 mm CAPACITIES
BLADE
FRAME
Single piece rolledRANGE
(REFILLING)
ring forging. Four circle support shoes with
ENGINE
Side wallFRONT
thickness: AXLE
STANDARD Inner . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIPMENT 22 mm replaceable wear surface. Circle teeth hardened on front 180° of
MOLDBOARD
TRANSMISSION Outer . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AND 25 mm circle. OPTIONAL EQUIPMENT
Wheel axle spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1840 mm HYDRAULICS
DiameterDRAWBAR
OPERATING WEIGHT (APPROXIMATE)1775 mm
(outside) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tandem TORQUE
OPTIONAL
REAR
CONVERTER 15° forward, 15° reverse
oscillation . . . . . . . . . . . . . . . . . . . .
AXLEEQUIPMENT Circle reversing
BLADE control
RANGE hydraulic rotation . . . . . . . . . . . . . . . . . 360°
INSTRUMENT
CIRCLE
DIMENSIONS
TANDEM DRIVE
WHEELS, FRONT AND REAR HYDRAULICS
CAPACITIES
MOLDBOARD
STANDARD EQUIPMENT
(REFILLING)
FRONT AXLE
STEERING INSTRUMENT
Dimensions . . . . . . . . . . . . . . . . . . . . . 4878 mm x 850 mm x 25 mm
Type . . . . . . . . . . . . . . . . . . Reverse Eliot type with hydraulic leaning Arc radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BLADE
OPTIONAL
OPERATING RANGE WEIGHT (APPROXIMATE) 414 mm
EQUIPMENT
Ground clearance
REAR AXLE at pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . 680 mm Cutting edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254 mm x 25 mm
Wheel leanBRAKESangle, right or left . . . . . . . . . . . . . . . . . . . . . . . . . . 14.5° CAPACITIES (REFILLING)
Blade pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18300 kg
Oscillation, total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32° Blade down pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15420 kg
HYDRAULICS
DIMENSIONS
WHEELS, FRONT AND REAR
FRAME OPERATING WEIGHT (APPROXIMATE)
INSTRUMENT
STANDARD EQUIPMENT
STEERING
12 DRAWBAR DIMENSIONS
CAPACITIES
OPTIONAL EQUIPMENT
(REFILLING)
BRAKES
TANDEM DRIVE
FRAME
ENGINE
FRONT AXLE
TRANSMISSION AND
TORQUE
DRAWBARCONVERTER
REAR AXLE
MOTOR GR ADER GD825A-2
CIRCLE DRIVE
TANDEM
WHEELS, FRONT AND REAR
MOLDBOARD
ENGINE
FRONT AXLE
STEERING
TRANSMISSION AND
BLADEAXLE
TORQUE
REAR RANGE
CONVERTER RIPPER (OPTIONAL)
BRAKES
Circle center shift: Ripping depth, maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 mm
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HYDRAULICS
WHEELS,
TANDEM FRONT AND REAR
DRIVE 1350 mm Ripper shank holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FRAME
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1200 mm Ripper shank holder spacing . . . . . . . . . . . . . . . . . . . . . . . . 475 mm
Moldboard side shift: Penetration force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16000 kg
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTRUMENT
STEERING
FRONT AXLE 1790 mm Machine length increase, beam raised . . . . . . . . . . . . . . . . . 894 mm
DRAWBAR
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1790 mm
Maximum ENGINE
shoulder reach
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2500 mm
CAPACITIES
BRAKES
REAR
TRANSMISSION AXLE (REFILLING) AND
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CIRCLE 2400 mm
Maximum lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TORQUE CONVERTER 420 mm
Maximum cutting depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . 680 mm
Maximum WHEELS,
FRAME
OPERATING
blade angle, right FRONT WEIGHT AND REAR
(APPROXIMATE)
or left . . . . . . . . . . . . . . . . . . . . . . . 90°
MOLDBOARD
Blade tipTANDEM
angle . . . . . . . . . . . . . . . . . . . . .
DRIVE 49° forward, 5° backward
STEERING
DRAWBAR
DIMENSIONS
BLADE RANGE
FRONT AXLE
CIRCLE
BRAKES
STANDARD EQUIPMENT
HYDRAULICS
REAR AXLE
One variable-capacity piston pump powers the work equipment
MOLDBOARD
OPTIONAL EQUIPMENT
FRAME
and steering system.
INSTRUMENT
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
WHEELS, FRONT AND REAR L/min
Standby pressure . . . . . . . . . . . . . . . . . . . . . . . . 1.0 MPa 10 kg/cm2
Maximum BLADE
DRAWBAR RANGE
system pressure . . . . . . . . . . . . . . . 24.5 MPa 250 kg/cm2
CAPACITIES (REFILLING)
STEERING
HYDRAULICS
CIRCLE
OPERATING WEIGHT (APPROXIMATE)
BRAKES
INSTRUMENT
MOLDBOARD
DIMENSIONS
Gauges:FRAME
Service meter, air pressure, coolant temperature, fuel level,
speedometer.
CAPACITIES
BLADE RANGE (REFILLING)
WarningSTANDARD EQUIPMENT
lights/indicator: Dust indicator, blade bank pin retract indi-
DRAWBAR
cator, final-drive oil temperature, engine oil pressure, coolant level,
coolant HYDRAULICS
temperature, air pressure,
OPERATING WEIGHT alternator changing, engine oil
(APPROXIMATE)
OPTIONAL
level, hydraulic EQUIPMENT
oil level, engine preheating.
CIRCLE
INSTRUMENT
DIMENSIONS
MOLDBOARD
CAPACITIES
STANDARD EQUIPMENT
(REFILLING)
BLADE RANGE
Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 L
Cooling OPERATING
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78.5
OPTIONAL EQUIPMENT
WEIGHT (APPROXIMATE) L
Crank case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 L
HYDRAULICS
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 L
Final drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 L
DIMENSIONS
Tandem housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 L
HydraulicINSTRUMENT
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 L
Circle reverse housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 L
STANDARD EQUIPMENT
CAPACITIES (REFILLING)
OPTIONAL EQUIPMENT
OPERATING WEIGHT (APPROXIMATE)
OPTIONAL EQUIPMENT
13
HYDRAULICS
INSTRUMENT
CAPACITIES (REFILLING)
DIMENSIONS
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
25°
10'1" 3065 mm
25°
Push plate (option) Ripper (option)
11'8" 3550 mm
ENGINE
8'7" 2620 mm 10'2" 3100 mm 6' 1840 mm
10'6" 3310 mm 23'4" 7100 mm 9'11" 3030 mm
TRANSMISSION AND
16' 4878 mm 32'10" 10010 mm
TORQUE CONVERTER
37'8" 11470 mm
Ground clearance. . . . . . . . .1'5" 440 mm
TANDEM DRIVE
FRONT AXLE
REAR AXLE
FRAME
DRAWBAR
CIRCLE
MOLDBOARD
BLADE RANGE
HYDRAULICS
INSTRUMENT
14 CAPACITIES (REFILLING)
TRANSMISSION AND
INSTRUMENT
TORQUE CONVERTER
CAPACITIES
TANDEM DRIVE
(REFILLING) MOTOR GR ADER GD825A-2
FRONT AXLEWEIGHT
OPERATING (APPROXIMATE)
REAR AXLE
DIMENSIONS
WHEELS,
STANDARDFRONT AND REAR
EQUIPMENT
Engine and Related Items Operator Environment •• Steering, full hydraulic with tilt steering
•• Air compressor
STEERING
OPTIONAL (with airEQUIPMENT
drier) •• Console, adjustable with instrument panel wheel plus leaning front wheels and frame
•• Corrosion resistor •• Dome light, cab articulation with anti-drift check valves
•• Double element air cleaner and dust •• Floor mat, low noise •• 9 section hydraulic control valve
BRAKES
indicator •• Mirrors: interior cab, right and left exterior
•• Engine : Komatsu S6D140E, mirrors Other Standard Equipment
turbocharged and water cooled, 280 HP •• Seat, vinyl with seat belt •• Front weight
FRAME
net horsepower •• Fuel tank, ground level access
•• Hand throttle Power Train •• Painting, Komatsu standard color scheme
•• Hood-sides for engine compartment •• Axle, rear full floating, planetary type •• Steps and handrails, rear, right and left
DRAWBAR •• Brake, parking, spring applied, air release, side
•• Precleaner
disc type •• Vandalism protection includes lockable
Electrical Systems •• Differential lock/unlock access to fuel tank and engine side
CIRCLE
•• Alarm, back-up •• Hydroshift transmission covers
•• Alternator, 50 A/24 V •• Service brakes, air actuated wet disk
•• Horn, MOLDBOARD
electric
•• Indicators, blade bank pin retract Work Equipment and Hydraulics
indicator, final-drive oil temperature, •• Circle, drawbar mounted, 360° rotation
engineBLADE
oil pressure, coolant level, coolant
RANGE hydraulic blade lift and circle side shift
temperature, air pressure, alternator •• Circle slip clutch
changing, engine oil level, hydraulic oil •• Hydraulic system, closed center, load
level, engine preheating
HYDRAULICS sensing
•• Lights, back-up and headlights •• Maximum moldboard angle position 90°
•• Speed meter right & left
INSTRUMENT
•• Work lamps, front (4), rear (2) •• Moldboard: 4878 mm x 850 mm x 25
•• 2 x 12 V/200 Ah batteries mm with replaceable side edges, through
hardened cutting edges 254 mm x 25
CAPACITIES (REFILLING) mm, hydraulic blade shift and hydraulic
tilt with anti-drift check valves.
DIMENSIONS
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
•• 203 mm x 19 mm curved cutting edge •• Cab mount work lamps (4) •• Ripper assembly, rear mounted
•• 2 x 12 V/220 Ah batteries •• Cab pressurizer •• Transmission underguard
•• Accumulators, anti-shock for blade lift •• Cold area arrangement (-30˚C) •• Vandalism protection, lockable access to
•• Air conditioner (R134a) •• DC 12 V power port hydraulic oil filler cap and radiator cap
•• AM/FM radio •• Engine oil pan and coolant heater •• Washer, rear
•• Alternator 75 A/24 V •• Fire extinguisher •• Wipers, doors and rear
•• Auxiliary steering •• General toolkit
•• Blade extension, 2” , LH and RH •• Heater and defrosters
•• Blade lift float detent style, LH and RH •• High altitude arrangement
•• Cab: low or high profile enclosed ROPS/ •• Lights, stop, tail and directional
FOPS (ISO 3471/ISO 3449) with safety •• Provision for fast fuel system
tinted glass windows, front wiper and •• Pusher plate
washer
Standard equipment may vary for each country, and this specification sheet may contain attachments and optional equipment that are not available in your area.
Please consult your Komatsu distributor for detailed information.
15
https://home.komatsu/en/ Printed in Japan 201806 IP.AD