Professional Documents
Culture Documents
*See next page for details on the financial and environmental benefits of Floccin
40308 Greenwood Way, Oakhurst, CA 93644 • ph: (559) 683-8284 • fax: (559) 683-8913 • sales@wecleanwater.com
Floccin vs. Traditional Chemicals
FLOCCIN TRADITIONAL
1 Step Process : Floccin Agent 3+ Step Process : acid, caustic, flocculants, dewatering
Decreased steps = decreased labor costs aids, and more
Minimal storage needed for product More steps = more labor costs
Less items to purchase = decrease in overall Extra storage space needed for multiple chemicals
purchasing costs More chemicals to purchase typically adds up to equal
or greater overall cost
Typically No Diatomaceous Earth (DE) needed Diatomaceous Earth (DE) typically needed
Filter presses do not typically need a pre-coat of DE when For every pound of DE used about 3 lbs of sludge is
using Floccin. Even when used about 50% less DE is generated incurring more disposal costs
required.
Dry / High Shear Strength Sludge Wet / Low Shear Strength Sludge
Dry sludge is lighter and has less volume = Wet sludge is heavy and has a greater volume =
decreased hauling and disposal fees greater hauling and disposal fees, or the cost of
No additional polymers needed to rebuild the floc additional dewatering
Lower suspended solids (solid carry thru) after Additional polymers may be needed to rebuild the floc
dewatering eliminates or decreasing retreatment Increased solid carry means more chemistry required
*Less sludge is produced overall adding to the benefits to retreat
40308 Greenwood Way, Oakhurst, CA 93644 • ph: (559) 683-8284 • fax: (559) 683-8913 • sales@wecleanwater.com
Results That Count
OIL FIELD SLUDGE DEWATERING
Major swings in solid loading and oil content made it difficult
to control the correct dosage with conventional chemistry.
Before After
Time: 3 months Time: 8 hours months
Gallons Dewatered: 15,000 Gallons Dewatered: 50,000
GOLD RECOVERY
The manufacturing of jewelry is comprised of molding to form
the jewelry followed by a polishing step, then deburring or
ultrasonic cleaning. These steps leave residual gold in the
rinsing and ultrasonic cleaning waters.
Before After
Recovery: 25% Recovery: 100%
*ROI: >273%
*this includes smelting costs
CORRUGATOR
Before After
Cost: $42,000 / year Cost: $24,000 / year
Haul-off Fees: $20k /mo Haul-off Fees: $0
# Chemicals Used: Five # Products Used: One
Before After
TSS: 7,200 ppm TSS: 55 ppm
BOD: 13,000 ppm BOD: 1,100 ppm
Protein Recovery: 0 ppm Protein Rec. : 12,000 ppm
DRYWALL Mfg
Before After
Treatment Cost: NA Treatment Cost: $0.10 / gal
Haul-off Fees: $1/gal + $20,000 installed system
Quantity: 1,000 gal / wk System pay-off estimated @
6 months
40308 Greenwood Way, Oakhurst, CA 93644 • ph: (559) 683-8284 • fax: (559) 683-8913 • sales@wecleanwater.com
Comparison by Industry
General discoveries based on data generated from testing Floccin against
typical treatment processes in the United States, China, Vietnam, Korea,
Mexico, and South America.
PAPER MILLS
Typical: PAC and anionic/cationic polymers, added prior
to the primary clarifier.
INDUSTRIAL LAUNDRY
Typical: Aluminum sulfate, caustic, and a cationic flocculant. Savings came
in metals compliance, meeting the FOG limit and nonhazardous sludge for
an overall savings of $80,000/year.
CHEMISTRY Untreated Coag / Floc Floccin
COD (ppm) 5,200 950 450 30 or 60 Gallon Feeders
TSS (ppm) 1,200 200 100
BOD (ppm) 3,400 475 260
FOG (ppm) 900 300 7
ZINC (ppm) 32 8 <0.5
AVAILABILITY
William C Clark
EMAIL : sales@wecleanwater.com