EUROPEAN STANDARD EN ISO 10512
NORME EUROPEENNE
EUROPAISCHE NORM November 1997
les 21,060.20
Descriptors: Fasteners, haxagon nuts, self-locking nuts.
English version
Prevailing torque type hexagon nuts (with non-
metallic insert), style 1, with metric fine pitch thread
Property classes 6, 8 and 10
(SO 10512 : 1997)
Eorous hexagoneux autofreinés (avec Sechskantmuttern mit Klernratell (mit
annaau non metallique), styla 1, 2 hichtmetallischam Einsatz) Typ 1, rit
filstage métrique & pas fin ~ metrischem Feingewinde ~
Classes cle qualt 6, 8 at 10 Fostigkeitsklassen 6, 8 und 10
iSO 10512: 1997), (SO 10512: 1997)
This European Standard was approvad by CEN on 1997-10-23
GEN members are bound to comply with the GEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date ists and biblographical references conceming such tational
slandards may be obtained on application to the Central Secretariat or to any
CEN mambar.
The European Standards exist in three offical versions (English, French, German).
Aversion in any olher language made by translation under the responsibility of &
CEN member int ts own language and noted tothe Central Secretariat nas the
same status as the official versions.
CEN members are tha national standards bodies of Austria, Belgium, the Gzach
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, tha Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,
fand the United Kingdom.
CEN
European Committee for Standardization
Comité Européen de Normalisation
Europaischos Komitee fur Norimung
Central Secretariat: rue de Stassart 36, B-1050 Brussels,Page 2
ENISO 10512: 1907
Foreword
International Standarc
180 10912: 1987 Prevailing torque typs hexagon nuts with non-metallic inset), style 1, with metric fing pitch
thread ~ Property classes 8, 8 and 10,
Which was prepared by ISO/TC 2 ‘Fasteners! of the Intemational Organization for Standardization, has bean
adopted by Technical Committee CEN/TC 186 ‘Threaded and non-threadad mechanical fastenars and acces-
sorlas', the Secretariat of which is held by DIN, as a European Standard.
This European Standard shall be given the stalus of a national standard, either by publicatian of an identical
text or by endorsement, and conflicting national standards withdrawn, by May 1998 at the latest.
Inaccordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow
Ing countries are bound to implement this European Standard:
Austria, Balglum, the Czech Republic, Denmark, Finland, France, Germany, Greece, losland, Ireland, Italy,
Luxembourg, the Netherlands, Norway, Portugal, Spain, Swaden, Switzerland, and the United Kingdom.
Endorsement notice
‘The text of the Intemational Standard ISO 10512: 1997 was approved by CEN as a European Standard without
any modification,
NOTE: Normative references to international publications are listed in Annex ZA (normative)
1 Scope
This Imernational Standard specifies the characteristics of prevailing torque type hexagon nuts (with
‘non-metallic insert), style 1, with metric fine pitch thread with nominal thread diameters d from 8 mm up to
and including 36 mm, in product grade A for sizes 4 up to and including 16 rom and product grade B for sizes 4
above 16 mm. and with property classes 6, 8 and 10.
NOTE — The dimensions of the nuts correspond to those given in !SO 8673 plus prevailing torque feature.
"other specifications are required, they should be selected from existing International Standards, for exarnple
(SO 261, 1SO 965-2, 1$0 2320 and ISO 4759-1,
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of thi
International Standard. At the time of publication, the editions indicated were vail. All standards are subject
to revision, and parties to agreements based on this International Standard are encouraged to investigate the
possibilty of applying the most recent editions of the standards indicated below. Members of IEC and ISO
‘maintain registers of currently valid International Standards.
1S0 226:1883, Fasteners ~ Bolts, screws, studs and nuts ~ Symbols and designations of dimensions:
($0261:-', 1S general purpose metric scrow threads ~ General plan.
'S0 965.2", 180 general purpose metric screw threads ~ Tolerances ~ Part 2: Limits of sives for gent
purpose bolt and nut threads ~ Medium quality.
80 2320:1997, Prevailing torque type steal hexagon nuts — Mechanical and performance properties.
'80.3269:1988, Fasteners — Acceptance inspection.
(80 4042, Fasteners ~ Electroplated coatings.
(80 4759-1.~", Tolerances for fasteners ~ Part 1: Bolts, screws, studs and nuts - Product grades A, B and C:
|S0 6157-2:1995, Fasteners ~ Surface discontinuities - Part 2; Muts
SO 8992-1986, Fasteners ~ General requirements for bolts, screws and nuts.
1) To be published, (Revision of ISO 2617873)
2) To be published, (Revision of 180 965:2:1960)
3) To be published, (Revision of 1S 4042-1889)
4) To be published. (Revision of ISO 4759-1:1978)3 Dimensions
See figure 1 and table 1.
‘Symbols and designations of dimensions are specified in SO 225,
1 Prevailing torque element, shape optional
Page 3
EN ISO 10512: 1997
2) fi= 18° t0.30°
3)9=90°to 120°
Figure +
Table 1 — Dimensions
Dimensions in millimetres
read WP) | waxy] MnO | mndxia5 | aMenta® [wiew is] M20% 1s] M242] Ma0%2| Ma6%3
amoxias | wieins
a mel as] os | 0 wi | va | ne | we | wa | 0
vin [ e00 [oo | 12 veo | 200 | m0 | ano | 260
mn | vrs [vss | vena | race | ezao | x7 | sazs | ears | oun
mm | ae | war | 200 | 73 | 257 | sao | o005 | coms | care
*mex[ os] us | ue wo | wi | me | ma | a6 | mao
win | see] na | _va use| va | a7 | 0 | sor | ma
mn] sae] aoe | ar | a | vr | vas | 202 | oa | ma
mmm sis | oa | aa oc | wae | ase | 1916 | wom | mee
> gm 300 | v0 | soo | avo | zao0 | aoc | 26 | oo | sso
wn [ vars | v573_| w7s | m0 | zor | ams [os | | soe
1) Pe the pitch of the road
2) The she in brackets should be avoided i posite
3) Minar ead heat
{8 Minimum wrenching height