Professional Documents
Culture Documents
6.The error happening when large angular input is given to TX rotor for a
short time
8.What device can change polar to cartesian coordinates and vice versa?
a .Torque synchro b.resolver synchro c. transducer d.control synchro
a) the transmitter stator b) the transmitter rotor only c) the transmitter and
receiver rotors
12.If the rotor of the receiver in a torque synchro system was prevented from
aligning with the transmitter rotor, then
a) the transmitter rotor will turn to align with the receiver rotor
b) the receiver will overheat c) a high current will flow in the stator windings .
16. A reduction from the optimum setting of the velocity feedback in a servo
loop could cause
a) must only have position feedback b) must have both position and velocity
feedback c) can have either position or velocity feedback d)have no feedback
a) the inputs are a shaft angle and a voltage b) the outputs are two voltages
c) the inputs are two voltages d)inputs are not applied