Professional Documents
Culture Documents
WATERSTOP BASIC USE Physical properties The following features are offered to
All Greenstreak PVC waterstops are specially assist this method of installation:
Embedded in concrete, across and/or along
formulated and manufactured to meet or ◆ Tie-Right - most PVC shapes are avail-
the joint, waterstops form a watertight
exceed the industry’s standard specifications. able with factory applied hog rings
diaphragm that prevents the passage of
fluid through the joint. ◆ Punched Flanges - most ribbed shapes
Greenstreak PVC Waterstop are available with punched flanges
Physical Properties
SUGGESTED WATERSTOP ◆ Grommets - selected shapes are avail-
PROPERTY TEST NOMINAL
able with brass grommets
DESIGN CHECKLIST *ASTM VALUE
Water absorption *D570 0.02
◆ Determine structure type Tear resistance *D624 225 lb./in.
◆ Verify chemical containment Ultimate Elongation *D638 360%
requirements (if any) Tensile strength *D638 2000 psi min.
◆ Verify hydrostatic head pressure Low temperature Passed @
brittleness *D746 -35°F / -37°C
requirements
Stiffness in flexure *D747 700 psi
◆ Determine joint type and joint Specific gravity *D792 1.40
movement requirements Hardness Shore A15 *D2240 79±3
◆ Verify joinery details of dissimilar or Accelerated CRD-
non-symmetrical waterstop profiles extraction C 572
(consider using one profile throughout • Tensile strength 1850 psi
• Elongation 350%
to simplify intersections)
Effect of Alkali
◆ Specify ribbed profile for best water • weight change +0.10%
PVC Waterstop fabrications
sealing performance • hardness change +1 point PVC waterstop splices, directional changes
◆ Specify type and size (by product and intersections are critical components of
number, if possible) Note: Greenstreak conducts regular testing a quality installation. Specifications requir-
◆ Specify factory fabrications of intersec- of materials. Refer to Suggested Master ing factory made fabrications are strongly
tions and heat welded field butt joints Specification for current values. recommended. Greenstreak can provide
homogeneous directional changes and
◆ Specify method for securing waterstop Independent laboratory tests are available
intersections, leaving only the less difficult
in position (hog rings, grommets, etc.) for the following applicable standards:
straight splices to be welded in the field.
◆ Corps of Engineers CRD-C572-74
◆ Bureau of Reclamation C902
◆ CH2M Hill
◆ Montgomery Watson, Inc.
◆ Various State Highway and/or Public
Works Department Standards
Installation aids for PVC waterstops
Greenstreak offers various features to
economically assist and promote proper
PVC WATERSTOP installation of PVC waterstops. Waterstops
must be securely positioned in the forms to
◆ The industry standard prevent deflection or misalignment during
◆ Broadest design selection concrete placement. This is achieved by SBR AND NEOPRENE
◆ Formulated and compounded by tethering the outer flanges of the waterstop RUBBER WATERSTOPS
Greenstreak to the adjacent reinforcing steel.
Greenstreak offers SBR and Neoprene
◆ Manufactured by Greenstreak from Tie-Right, Grommeted, Punched Flanges waterstops for applications requiring the
only prime resins and all virgin physical properties of rubber. These water-
raw materials stops are manufactured to meet the Corps of
◆ Great inherent elasticity Engineers and The Bureau of Reclamation’s
◆ Resistant to many waterborne chemicals specifications for rubber waterstops.
◆ Heat weldable
◆ Will not discolor concrete or produce
electrolytic action
◆ Suitable for above or below grade
applications
2
M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4
3
C A L L G R E E N S T R E A K ’ S T E C H N I C A L S E R V I C E D E PA R T M E N T F O R A S S I S TA N C E W I T H
Ribbed Flat Construction or contraction Ribbed with Centerbulb The most versatile type of
joints where little or no waterstop available. The
movement is expected. Ribbed centerbulb accommodates
shapes provide a better seal lateral, transverse and
than dumbbell shapes. shear movement. Larger
centerbulbs accommodate
larger movements.
Dumbbell Construction or contraction
joints where little or no Dumbbell with Centerbulb Accommodates lateral,
movement is expected. transverse and shear
movements. Ribbed
shapes provide better
Base Seal Ideal for slab-on-grade joints sealing characteristics.
or walls which will be back-
filled. Easy to form.
*Tear Web Accommodates large
movements. Upon joint
*Labyrinth Primarily used in vertical joints movement the tear web
where little or no differential ruptures allowing the
movement is expected. Does U-bulb to deform without
not require split forming and putting the material
adds a key to the joint. Difficult in tension.
to use in horizontal joints.
RETROFIT APPLICATIONS
*Split Waterstop Available in ribbed with center-
bulb and dumbbell shapes. Retrofit System Seals joints where
Eliminates the need for split new construction
form bulkhead. meets existing struc-
ture. Eliminates the
need to saw cut and
grout in a conven-
Hydrotite Used in joints of limited move- tional waterstop.
ment, Hydrotite expands with
water contact to create a com-
pression seal. Installs quickly.
*Some directional changes or intersections may not be practical or possible with this style of waterstop. Consult Greenstreak’s
Technical Service Department for the suitability of this style waterstop for your specific application.
4
M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4
WATERSTOP PROFILES
Once you have determined the joint type, the magnitude of the profiles are available to meet the most demanding requirements.
differential movements and the type of waterstop to meet project Should your project require a special shape, GREENSTREAK
requirements, you must select a specific profile from the multitude offers the world’s broadest line of waterstop sizes and profiles.
of shapes. The following are a few of the most commonly Custom orders will be considered. A Waterstop Profile supplement
specified profiles. illustrating all of the profiles is available upon request. For a copy,
GREENSTREAK® waterstop is manufactured in widths from 4" to 12" call GREENSTREAK at (800)325-9504.
and in thicknesses from 1/8" to 1/2". Over 110 different sizes and
PVC SHAPES
696 STD. WT. 2.65 lbs/ft 3.94 Kg/m HEAD PRESS. 175' 523 KPa
702 STD. WT. 0.74 lbs/ft 1.10 Kg/m HEAD PRESS. 65' 194 KPa
Bureau of Reclamation COE
7/8" ID & 1-1/2" OD
3/16" 1/4" ID & 3/4" OD
3/16" 3/8" 22.2mm ID & 38.1mm OD 1/4"
957 STD. WT. 1.75 lbs/ft 2.60 Kg/m HEAD PRESS. 150' 448 KPa 4.8mm 9.5mm 6.4mm
4.7mm
6.4mm ID & 19mm OD
1/8"
.984" .177" .275" .137" .118" Brass 3.2mm
Grout 3.5mm
2525mm 4.5
4.5mm 77mm Ribs 3.5 3mm
3 Eyelet 9" 4"
228.6mm 101.6mm
1.986"
50 2.165"
55 718 STD. WT. 2.10 lbs/ft 3.13 Kg/m HEAD PRESS. 175' 523 KPa
50mm
250 55mm
9.842"
250mm 3/4" ID & 1-1/4" OD 1/8"
701 STD. WT. 0.40 lbs/ft 0.60 Kg/m HEAD PRESS. 50' 149 KPa
1/4" 3/8" 3.2mm
6.4mm 9.5mm 19mm ID & 31.8mm OD
3/16" 3/16" ID & 3/8" OD
4.7mm 4.7mm ID & 9.5mm OD
9" 4"
228.6mm 101.6mm
679 STD. WT. 1.50 lbs/ft 2.23 Kg/m HEAD PRESS. 125' 373 KPa
Montgomery – Watson
1/8"
709 STD. WT. 1.63 lbs/ft 2.43 Kg/m HEAD PRESS. 175' 523 KPa 838 STD. WT. 1.10 lbs/ft 1.64 Kg/m HEAD PRESS. 150' 448 KPa
3.2mm 3/8" 5/8"
9.5mm 15.9mm 5mm 6.4mm ID & 12.7mm OD
3/16" (1/4" opt.) 3/8" 1/4" ID & 3/4" OD 1/8" 13/64" 1/4" ID & 1/2" OD
4.7mm 9.5mm 6.4mm ID & 19mm OD 3.2mm
6" 203mm
152.4mm
8"
9"
228.6mm
953 STD. WT. 1.77 lbs/ft 2.64 Kg/m HEAD PRESS. 150' 448 KPa 712 STD. WT. 4.38 lbs/ft 6.52 Kg/m HEAD PRESS. 225' 672 KPa
.984" 17ID
.177" .669" ID.275" .137" .118" Brass 7/8" 1/2" 1/2" ID & 1-1/4" OD 1"
956 STD. WT. 1.32 lbs/ft 1.96 Kg/m HEAD PRESS. 125' 373 KPa 25mm
25 4.5 17mm ID 77mm
4.5mm 3.5mm
3.5 3mm
Eyelet
22.2mm 12.7mm 12.7mm ID & 31.8mm OD 25.4mm
1/4" 3/8" 1/8" 738 STD. WT. 2.73 lbs/ft 4.06 Kg/m HEAD PRESS. 150' 448 KPa
6.4mm 9.5mm 3.2mm
705 STD. WT. 1.19 lbs/ft 1.77 Kg/m HEAD PRESS. 125' 373 KPa
Bureau of Reclamation 7/8" 3/8" 7/8" ID & 1-3/8" OD
22.2mm 9.5mm 22.2mm ID & 34.9mm OD
9"
228.6mm 3/16" 3/8" 1/4" ID & 11/16" OD
6.4mm ID & 17.5mm OD
4.7mm 9.5mm
1/8"
3.2mm 9"
228.6mm
6"
152.4mm
783 STD. WT. 1.39 lbs/ft 2.07 Kg/m HEAD PRESS. 125' 373 KPa
731 STD. WT. 1.73 lbs/ft 2.58 Kg/m HEAD PRESS. 175' 523 KPa
703 STD. WT. 0.73 lbs/ft 1.09 Kg/m HEAD PRESS. 100' 299 KPa
1/8" 3/8" 1/4" 1/2" ID x 7/8" OD
3.2mm 9.5mm 6.4mm
3/16" 1/4" ID & 5/8" OD 12.7 mm x 22.2 mm
1/8" 6.4mm ID & 15.9mm OD
3.2mm 4.7mm
1/8"
6" 3.2mm
3/8" 9.5mm 1/4"
152.4mm 6" 9"
152.4mm 228.6 mm
5
C A L L G R E E N S T R E A K ’ S T E C H N I C A L S E R V I C E D E PA R T M E N T F O R A S S I S TA N C E W I T H
PVC SHAPES
Dumbbell Split Flange Base Seal
932 STD. WT. 2.67 lbs/ft 3.99 Kg/m HEAD PRESS. 150' 448 KPa 727 STD. WT. 2.25 lbs/ft 3.35 Kg/m HEAD PRESS. 150' 448 KPa 639 1.07 lbs/ft 1.59 Kg/m HEAD PRESS. 100' 299 KPa
STD. WT.
Grout .393" 1-3/16"
Ribs 10mm 3/8" 5/8" OD 3/32" 1/2" 9/16"
9.5mm 15.9mm OD 2.4mm 1/8" 30.2mm 12.7mm 14.3mm 1-5/8"
.984"
25 3.2mm 41.3mm
25mm
9.055" 10 3/16" 1/8"
230
230mm
9" 4.7mm 3.2mm
228.6mm 6"
152.4mm
748 STD. WT. 1.51 lbs/ft 2.25 Kg/m HEAD PRESS. 125' 373 KPa 722 STD. WT. 1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa 776 STD. WT. 0.83 lbs/ft 1.24 Kg/m HEAD PRESS. 100' 299 KPa
3/16" 3/8" 3/4" OD 1/8"
9.5mm 3.2mm 9/16"
3/8" 9.5mm 4.7mm 19mm OD
3/4" 14.3mm
19mm
6" 6"
9" 152.4mm New York D
152.4mm
228.6mm
771 STD. WT. 1.53 lbs/ft 2.28Kg/m HEAD PRESS. 100' 299 KPa
751 STD. WT. 2.18 lbs/ft 3.24 Kg/m HEAD PRESS. 150' 448 KPa 724 STD. WT. 1.54 lbs/ft 2.29 Kg/m HEAD PRESS. 125' 373 KPa
3/4"
5/32"
3.9mm
3/4" 3/8" 5/8" OD 3/32" 19mm
3/8" 9.5mm 19mm 2.4mm
19mm 9"
9.5mm
228.6mm
3/16"
9"
6"
152.4mm 4.7mm 772 STD. WT. 1.85 lbs/ft 2.75 Kg/m HEAD PRESS. 100' 299 KPa
228.6mm
3/4" 5/32"
3.9mm
723 STD. WT. 0.76 lbs/ft 1.13 Kg/m HEAD PRESS. 100' 299 KPa
19mm Texas
752 STD. WT. 2.55 lbs/ft 3.79 Kg/m HEAD PRESS. 150' 448 KPa
3/16" 5/8" OD 3/32" 9" Hwy.
228.6mm Type A
1" 4.7mm 15.9mm OD 2.4mm
3/8" 25.4mm
9.5mm
6"
152.4mm
774 STD. WT. 0.79 lbs/ft 1.18 Kg/m HEAD PRESS. 75' 224 KPa
1/8" 7/16"
9" 3.2mm 7/16" 11.1mm
228.6mm 721 STD. WT. 0.50 lbs/ft 0.74 Kg/m HEAD PRESS. 65' 194 KPa 11.1mm Texas
Hwy.
1/16" 3/16" 3/32" 7" Type B
747 STD. WT. 1.07 lbs/ft 1.60 Kg/m HEAD PRESS. 100' 299 KPa 1.6mm 4.7mm 2.4mm 177.8mm
1/4" 5/8"
15.9mm 4"
101.6mm
777 STD. WT. 2.75 lbs/ft 4.09 Kg/m SlabSpan
6.4mm 5/32"
5/32"
3.9mm
3.9mm
6"
759 STD. WT.1.49 lbs/ft 2.22 Kg/m HEAD PRESS. 125' 373 KPa
17"
17"
152.4mm 3/4" 3/8"
431.8mm
431.8mm NOT TO SCALE
19mm 3/8"
9.5mm 9.5mm
746 STD. WT. 0.71 lbs/ft 1.06Kg/m HEAD PRESS. 75' 224 KPa Special Shapes
6" 3/16"
3/16"
4.7mm
3/8"
9.5mm
152.4mm 4.7mm 609 STD. WT. 2.92 lbs/ft. 4.35 Kg/m of Retrofit System
Available as a system:
6"
760 STD. WT. 2.20 lbs/ft 3.27 Kg/m HEAD PRESS. 150' 448 KPa
• Waterstop
152.4mm 3/4" 3/8"
19mm 9.5mm
3/8" • S.S. Batten Bar
9.5mm
2 / ft. of waterstop
741 STD. WT. 0.47 lbs/ft 0.70 Kg/m HEAD PRESS. 65' 194 KPa
• S.S. Anchor Bolt
9" 3/16"
3/16" 3/8" 228.6mm 4.7mm
4.2 pcs. / ft. of
4.7mm 9.5mm waterstop
1-5/8"
Dumbbell With Centerbulb 3/16"
4.7mm
41.3mm 667 STD. WT. 8.27 lbs/ft. 12.31 Kg/m of Retrofit System
.787"
20 per 10 ft. section NEW STRUCTURE
20mm 1-5/8"
6"
753 STD. WT. 3.10 lbs/ft 4.61 Kg/m HEAD PRESS. 150' 448 KPa 112.7mm 6" predrilled bars require
PREDRILLED
SERRATED BASE
1/2"
698 STD. WT.0.78 lbs/ft 1.16 Kg/m HEAD PRESS. 65' 194 KPa
1/8" 3/4" 3/8"
9"
228.6mm
3.2mm 19mm 9.5mm 775 STD. WT. 4.64 lbs/ft 6.91 Kg/m
9"
3/4" 228.6mm 5°
6" 19mm
754 STD. WT. 3.70 lbs/ft 5.51 Kg/m HEAD PRESS. 150' 448 KPa 152.4mm
15/16"
23.7mm 3/8"
2" ID & 2-3/4" OD
50.8mm ID & 69.8mm OD
699 STD. WT. 1.00 lbs/ft 1.49 Kg/m HEAD PRESS. 100' 299 KPa
1/2"
3-1/2"
88.9mm
9.5mm 1/8" 3/4" 3/8" 12.7mm
3.2mm 19mm 9.5mm
8"
203.2mm
9"
228.6mm
9" 792 STD. WT. 1.10 lbs/ft 1.64 Kg/m W1–2 Calif.
228.6mm 700 STD. WT. 3.78 lbs/ft 5.63 Kg/m HEAD PRESS. 150' 448 KPa 3/4"
19mm
756 STD. WT. 1.20 lbs/ft 1.79 Kg/m HEAD PRESS. 100' 299 KPa
3/8" 1/4" 3/4" ID & 1-1/8" OD 2-1/2" 1-1/8" 1/8" 1/8" 1/8" 3-1/8"
9.5mm 63.5mm 28.6mm 3.2mm
6.3mm 19mm ID & 28.6 mm OD 3.2mm 3.2mm 82.6mm
3/8" 3/4"
9.5mm 19mm
6" 9"
152.4mm 5-1/4"
228.6mm
133.4mm
6
M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4
919 STD. WT. 2.20 lbs/ft 3.27 Kg/m HEAD PRESS. 150' 448 KPa 903 STD. WT. 1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa
1" 25.4mm
3/8" 3/4" 3/8" 3/4"
19mm 19mm
9.5mm 9.5mm
Swellstop II
9" 9"
228.6mm 228.6mm 596 STD. WT. 0.22 lbs/ft 0.33 Kg/m
920 STD. WT. 1.22 lbs/ft 1.82 Kg/m HEAD PRESS. 100' 299 KPa 904 STD. WT. 1.05 lbs/ft 1.55 Kg/m HEAD PRESS. 100' 299 KPa
3/8"
9.5mm
5/8" 1/4" 3/4" ID & 1-1/8" OD 5/8"
15.9mm 15.9mm 1/4" 3/4" ID & 1-1/8" OD
6.3mm 19mm ID & 28.6 mm OD 6.3mm 19mm ID & 28.6 mm OD
3/4"19mm
6" 6"
152.4mm 152.4mm
Lockstop
921 STD. WT. 2.90 lbs/ft 4.32 Kg/m HEAD PRESS. 150' 448 KPa 906 STD. WT. 2.50 lbs/ft 3.70 Kg/m HEAD PRESS. 150' 448 KPa 595 STD. WT. 0.48 lbs/ft 0.71 Kg/m
1"
25.4mm 3/8"
9.5mm
3/4" ID &1-1/2" OD
19mm ID & 38.1 OD
1"
25.4mm 3/8" 3/4" ID &1-1/2" OD
19mm ID & 38.1 OD
3/4"
9.5mm 19mm
9"
228.6mm 9"
228.6mm
1" 25.4mm
7
THE WORLD’S NUMBER ONE INJECTION HOSE SYSTEM
FUKO is a specially designed and patented solid core PVC Injection
Hose System which is installed in concrete joints to waterproof and
seal any cracks or voids in the joint area. The FUKO System seals
joints watertight and offers a complete maintenance program if
leakage appears in the future. When Portland Cement, Microfine
Cement, or Duroseal Injection Resins are selected, the FUKO System
can be used for multiple reinjections – a significant advantage over
any other hose system available.
LIMITED WARRANTY: GREENSTREAK warrants to the Buyer that this prod- performed any tests. Any test data has been prepared by independent commer-
uct will be free of defects and will perform as represented in writing subject to cial laboratories.
the (2) following conditions: Because GREENSTEAK has no control over either the application or the selec-
First, the application of the product and the concrete construction practices used tion of its products, GREENSTREAK’s Limited Warranty is as follows:
in the application are in accordance with GREENSTREAK’S Recommendations. The exclusive remedies of the Buyer and the limit of the liability of
Second, the Buyer has selected the proper product for the specific application GREENSTREAK from any and all losses or damages resulting from
required. GREENSTREAK disclaims any responsibility for the selection of a par- the use of this product (including claims based on contract, negli-
ticular waterstop product. Product selection is the sole responsibility and deci- gence, strict liability, or otherwise) shall be either the full refund of
sion of the buyer. The suitability of any material for a specific application requir- the purchase price to Buyer of this product or the replacement of
ing fluid resistance is best determined by specific testing for the application. the quantity of product purchased by the
GREENSTREAK urges the Buyer to conduct its own testing. Buyer - at the election of GREENSTREAK. In no event shall GREEN-
Any information supplied by GREENSTREAK with respect to its products is STREAK be liable for any incidental or consequential damages. The
believed to be correct. GREENSTREAK makes no representations or warranties, Buyer and all users of this product are deemed to have accepted the
express or implied, as to the accuracy or completeness of such information or terms of this Limited Warranty which may not be varied in any way
the use of such information for a particular purpose. GREENSTREAK has not by any verbal or written agreement.