Professional Documents
Culture Documents
user manual
English
A B C
115˚
115˚
115˚
115˚
1040 135˚
1040 135˚
964 135˚
964 135˚
964 135˚
Spacer
Spacer
01 SETTING UP
Remove paper on spacer and then attach Be careful : do not damage the cover leg
two spacers (Gray block) on the back CAUTION while moving the refrigerator. The cover
side of refrigerator for better performance. leg protects the wire and hose . If it is
Make sure two spacers fix like below damaged, the refrigerator may also be
image when you install the refrigerator. It damaged. (Optional)
is improving the refrigerator performance.
(Optional)
Insert
SETTING UP THE
REFRIGERATOR
Now that you have your new refrigerator installed
and in place, you are ready to set up and enjoy
the full features and functions of the appliance.
By completing the following steps, your refrigerator
should be fully operational.
If not, first check the power supply and electricity
source or try the troubleshooting section at the
back of this user guide.
If you have any further questions, contact your
Samsung Electronics service center.
10_ setting up
02 OPERATING
(TYPE A) (TYPE B)
2 Fridge
Press the Fridge button to set the fridge to
desired temperature from the range 1 °C to
between 1 °C and 7 °C.
Default set temperature is set on 2 °C and each
time you press the Fridge button, temperature
will changing following order and temperature
indicator will display the desired temperature.
1 Power Cool 1 °C 7 °C 5 °C 3 °C 2 °C
1. When you press the Power Cool button, the
Indicator ( ) will light up and the refrigerator
will speed up the time. 3 Ice On/Off
2. This function will be activated for several hours
and then return to the previous temperature. If you do not want to make more ice, press the
3. This function switches off automatically. Ice On/Off button, and the indicator will light up.
When the Power Cool process is completed, Default set Ice On/Off function is ON.
the Power Cool indicator switches off and We recommend you stop ice making if the
the freezer switches back to the previous following occur:
temperature setting. - There is enough ice in the ice bucket.
To deactivate this function, press the Power - You want to save water and energy.
Cool button.
- The water tank is empty.
When you use the Power Cool function,
the cooling of the refrigerator will be
speeded up for several hours.
Temperature
control knob
Fridge
Freezer Refrigerator
(A TYPE ) (B TYPE ) (C TYPE )
Display
When the food in the refrigerator is not as fresh as
desired or if you want to lower the temperature of
the refrigerator, set the Temperature Controller of
the fridge on 5~6 or the Temperature of Display
model on 1. When food in the refrigerator is
We recommend to set the temperature controller frozen or if you want to increase the temperature
of the freezer and the refrigerator on Normal of the freezer, set the Temperature Controller of
in order to have a stable performance of the the fridge on 1~3 or the Temperature of Display
appliance. model to 3~7.
When food in the refrigerator is frozen or if you
want to increase the temperature of freezer, set • When the ambient temperature is under 10 °C,
the Freezer Temperature Controller on 1~3. do not set the Fridge Temperature Controller
• When the ambient temperature is under 10 °C, on 1~2 or the Temperature of Display model
set the Freezer Temperature Controller on 8~9 on 5~7. Otherwise the performance of the
to make ice. refrigerator may be caused problems.
• When the ambient temperature is higher • When the ambient temperature is higher than
than 35 °C, set the the Freezer Temperature 35 °C, set the Fridge Temperature Controller
Controller on Normal to make ice. on 4~6 or the Temperature of Display model
on 1~2. Otherwise the performance of the
Adjusting the Freezer Temperature refrigerator may be caused problems.
02 OPERATING
for the first time.
• After disassembling the water tank, wipe up
the inside of refrigerator until it is clean and dry.
Danger of explosion
CAUTION • Glass bottles containing liquids that can
freeze should never be stored in the
freezer as the glass will explode when
the contents freeze.
After
TRAY TYPE (OPTIONAL)
After putting back the water tank, do not
Making ice cubes
CAUTION disassemble the shelf below the water
Fill up the ice tray with water and that till it reaches
tank. It may cause a personal injury or
the maximum level mark on the rear of the tray.
material damage.
Put the ice tray in the freezer.
For more space, empty the water off the
water tank, remove the lid completely,
place the water tank back and use it to
store food.
Method 1.
Fill the water lifting the round lid in the arrow
direction to open.
02 OPERATING
section. So, the lower guard shall
be placed on the original position
for proper performance.
operating _15
1. Pull out the ice tray and box and then pull out
the right side of support tray ice. Same steps
to left side. (Only for ice max option model)
catalyzing
02 OPERATING
Before removing any accessories, make
sure that no food is in the way.
When possible, remove the food altogether
to reduce the risk of accidents.
operating _17
18_ Troubleshooting