Professional Documents
Culture Documents
DISEÑO ARQUITECTONICO:
DISEÑO ESTRUCTURAL:
FACTOR DE ZONA SISMICA
NOMA NEC SE DS
I
III
IV
V II
III
VI
II
TIPOS DE SUELO NORMA NEC SE DS
ZONIFICACION SISMICA CANTON GUAYAQUIL MDSEG-01
CLASIFICACION DE SUELOS SEGÚN ASCE7-10
SUELO TIPO F SEGÚN ASCE7-10
EL PERFIL DE SUELO SIGUIENTE
CLASIFICA COMO SUELO SE
SUELO TIPO F SEGUN NORMA NEC SE DS SUELOS TIPO F:
SUELOS LICUABLES
Para Quito
Con Perfil de Suelo Tipo D
Se usará Z = 0,4
Fa = 1,2
Para Guayaquil y
La Puntilla de Samborondón
Con Perfil de Suelo Tipo E
Se usará Z = 0,4
Fa = 1,14
COEFICIENTES DEL PERFIL DE SUELO NEC SE DS
Para Quito
Con Perfil de Suelo Tipo D
Se usara Fd = 1,4
Para Guayaquil y
La Puntilla de Samborondón
Con Perfil de Suelo Tipo E
Se usara Fd = 1,6
COEFICIENTES DEL PERFIL DE SUELO NEC SE DS
Para Quito
Con Perfil de Suelo Tipo D
Se usara Fd = 1,5
Para Guayaquil y
La Puntilla de Samborondón
Con Perfil de Suelo Tipo E
Se usara Fd = 1,9
ESPECTRO ELASTICO DE DISEÑO
NEC SE DS
ESPECTRO ELASTICO DE DISEÑO NEC SE DS
QUITO GUAYAQUIL
DISEÑO SISMICO SEGÚN NEC SE DS
US ICC (International Code Council) Performance Code - 2000 SEAOC-1996
VISION 2000
44 años
Operacional (ASCE)
Tr para Vida
Útil de 50 años
44 años
72 años
475 años
= Tr = 475 años
Ocupación inmediata (ASCE)
FEMA 356: Esta publicación supera a FEMA 273 y 274 y transformó a dichas
publicaciones a un lenguaje mandatorio. Este Pre-estándar sirve como una herramienta
de aplicación nacional (USA) para los diseñadores de estructuras, funcionarios públicos y
dueños de edificios que llevan a cabo la rehabilitación sísmica de edificaciones existentes.
Esta publicación contiene especificaciones técnicas para rehabilitación sísmica. Los
comentarios explican a las especificaciones. Los capítulos incluyen requerimientos para:
procedimientos de análisis, estudios geológicos del sitio y las cimentaciones; diseño con
acero, hormigón armado, mampostería, madera y perfiles de acero livianos; diseño con
sistemas de aislamientos sísmico y disipación de energía; métodos simplificados de
rehabilitación; especificaciones para elementos de arquitectura, mecánicos y eléctricos;
y, como usar este Pre- estándar para Programas de Mitigación del Riesgo. Nótese que
FEMA 356 ha sido superado por ASCE 41, Rehabilitación Sísmica de Edificaciones.
http://www.fema.gov/library/viewRecord.do?id=1427
Scope:
This standard for the Seismic Rehabilitation of Existing Buildings, referred to herein as
"this standard," specifies nationally applicable provisions for the seismic rehabilitation of
buildings. Seismic rehabilitation is defined as improving the seismic performance of
structural and/or nonstructural components of a building by correcting deficiencies
identified in a seismic evaluation. Seismic evaluation is defined as an approved process or
methodology of evaluating deficiencies in a building, which prevent the building from
achieving a selected Rehabilitation Objective. Seismic evaluation using ASCE 31 (ASCE
2002), the procedures and criteria of this standard, or other procedures and criteria
approved by the authority having jurisdiction is permitted.
Seismic rehabilitation of existing buildings shall comply with requirements of this standard
for selecting a Rehabilitation Objective and conducting the seismic rehabilitation process
to achieve the selected Rehabilitation Objective. This standard does not preclude a
building from being rehabilitated by other procedures approved by the authority having
jurisdiction. Symbols, acronyms, definitions, and references used throughout this
standard are cited separately in sections located at the end of this standard.
MODELAMIENTO DEL COMPORTAMIENTO
INELASTICO USANDO ASCE 41-06
DISEÑO ARQUITECTONICO:
DISEÑO ESTRUCTURAL:
37
38
Características del Sistema
Estructural:
1. Estructura de Hormigón
Armado, diseñada y
construida en los años 70
con Cs = 0,1
3. El Sistema de Pórtico
Espacial se combina con un
Sistemas de Muros rígidos
sin detallamiento sísmico
39
Se identificó que:
40
41
42
43
44