Professional Documents
Culture Documents
Accessory
Color
1 1 Keyless Entry Module
2 2 Keyless Entry Transmitter
3 1 Main Harness - Keyless Entry
4 1 Valet Switch
5 1 Hardware Bag
Vehicle Trim Color
6 2 24" Black Cable Ties
SERVICE PARTS
ITEM QUANTITY PART NUMBER DESCRIPTION
1. 1 00016 - 79200-01 Main Keyless Entry Control Module
2. 2 00016 - 34030-05 Keyless Entry Transmitter
3. 1 00016 - 32901-01 Main Wiring Harness
4. 1 00016 - 30960-56 ON/Off Toggle Control Switch
5. 1 00016 - 32901-02 Miscellaneous Hardware Kit
INSTALLATION PREPARATION
VEHICLE PREPARATION
2. IMPORTANT !
Page 3
WIRING DIAGRAM
BLUE WIRE [ Headlights ]: Use red T-Tap and connect to the RED
WIRE in connector C12, location 8.
connection is made to the horn circuit.
WHITE WIRE [ Parking Lights ]: Use red T-Tap and connect to the
GREEN / WHITE STRIPE WIRE in connector C12, location 13.
4
PINK / WHITE STRIPE WIRE [ Door Unlock Switch ]: Use red T-Tap
and connect to the BLUE WIRE in connector IC2, location 9.
WIRING DIAGRAM -
PINK / WHITE STRIPE WIRE [ Door Unlock Detect Switch ]: Use red
10 A. Fuse
T-Tap and connect to the WHITE WIRE in connector IC2, location 10.
Wires
Main Control
Cut the RED WIRE in connector IC1, location 12. Strip the
insulation from both sides of the cut wire, and crimp the BLUE w/
WHITE
WHITE WIRE from the alarm harness to the harness side of
the cut wire. Crimp the BLUE / WHITE STRIPE WIRE from
the alarm harness to the connector side of the cut wire. Cut & Strip
Existing
WHITE Wire
CONNECTOR DETAILS - 2006 Corolla Keyless Entry
1. CONNECTOR I10: Ignition Switch 4. CONNECTOR IC1 : Door Lock
Location : At Back Of Ignition Switch, behind lower Steer- Location : Driver's Kick Panel.
ing Column Cover Panel.
Connector I10 Connector I10 BLUE
Location 1 Location 2
White Wire Black w/ Yellow Stripe
+12 VDC Battery +12 VDC Accessory
[AL - Red] [AL - Yellow]
Connector IC1
Location 12
Red Wire
Driver's Door Unlock Motor
[AL - White & Blue/ White]
Location 6
Green Wire
Door Lock Switch
[AL - Pink]
Location 13
Green w/ White Stripe
Parking Lights
Location 8 [AL - White]
Red
Headlights
[AL - Blue]
5
TOYOTA CAMRY 2007 KEYLESS ENTRY SYSTEM
SERVICE PARTS
ITEM QUANTITY PART NUMBER DESCRIPTION
1. 1 00016 - 79200-01 Main Keyless Entry Control Module
2. 2 00016 - 34030-05 Keyless Entry Transmitter
3. 1 00016 - 32901-01 Main Wiring Harness
4. 1 00016 - 30960-56 ON/OFF Toggle Control Switch
5. 1 00016 - 32901-02 Miscellaneous Hardware Kit
INSTALLATION PREPARATION
VEHICLE PREPARATION
2. IMPORTANT !
Page 6
TOYOTA CAMRY 2007 KEYLESS ENTRY SYSTEM
GREEN / RED STRIPE WIRE [ Horn ]: Use red T-Tap and connect to the
WHITE WIRE in connector E18, location 8.
BLUE WIRE [ Headlights ]: Use red T-Tap and connect to the RED
WIRE in connector E21, location 17.
WHITE WIRE [ Parking Lights ]: Use red T-Tap and connect to the
BLACK WIRE in connector E21, location 18.
PINK WIRE [ Door Lock Switch ]: Use red T-Tap and connect to the
VIOLET WIRE in connector IE2, location 15.
8
PINK / WHITE STRIPE WIRE [ Door Unlock Switch ]: Use red T-Tap
and connect to the DK GREEN WIRE in connector IE2, location 7.
WIRING DIAGRAM -
PINK / WHITE STRIPE WIRE [ Door Unlock Detect Switch ]: Use red
10 A. Fuse
T-Tap and connect to the BLUE WIRE in connector IE2, location 24.
Wires
Main Control
Location 7
Dk Green Wire
Door Unlock Switch
[AL - Pink/ White]
Location 15
Violet Wire
Door Lock Switch
[AL - Pink]
Connector E23 Connector E23
Location 5 Location 6
Black Wire Yellow Wire
+12 VDC Battery +12 VDC Ignition
[AL - Red] [AL - Yellow]
Location 18
Black Wire
Parking Lights
[AL - White]
Location 17
Red Wire
Headlights
[AL - Blue]
9
2006 COROLLA
2007 CAMRY
KEYLESS ENTRY SYSTEM
Press and release the UNLOCK button 2. Start with the doors in the unlocked
again. All doors should unlock. position, Toggle Control switch in the
"OFF" position.
Press and hold the PANIC button. The
horn should sound and the parking lights 3. Turn the ignition key to the on position.
should flash.
4. Turn the ignition key off, then
Press and release the PANIC button to immediately switch the Toggle Control
silence the alarm. Switch "ON" then "OFF" 4 times.
NOTE : Be sure to test both transmitters 5. The vehicle horn should respond with
that were included in the kit. soft horn chirps.
Page 10