Professional Documents
Culture Documents
Table of contents
Technical Information 9
Hoses 39
Tools 119
Couplings 521
Index 767
TECHNICAL INFORMATION 9
HOSES 39
Suction hoses 71
Fuel hoses 75
Thermoplastic hoses 79
High pressure hoses 79
Extreme pressure hoses 94
PA, PE and PU pipes 98
Measuring hoses 101
Soft PVC hoses 102
TOOLS 119
COUPLINGS 521
INDEX 767
Technical Information
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers' liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Hose assemblies are the heart of the HANSA-FLEX range of products and have proven their performance a mil-
lion times over since we commenced business. This part of our range includes fittings and hose sold by the metre,
complying with all international industrial standards and in a wide variety of different types.
There is virtually no limit to the number of possible applications, whether they call for the use of standard swage
fittings, interlock fittings or re-usable fittings. The same applies to our hose products. Choosing the right type of
hose can have a decisive impact on the safe and efficient operation of a hydraulic system.
– Resistance to the carried medium – cleaning processes should also be allowed for!
– Resistance to temperature – you should also check the temperature/pressure characteristics!
– Resistance to pressure including required safety devices (also vacuum behaviour)
– Bending radii
– Any unusual stresses due to external forces or pressure pulses
– Abrasion resistance and possible protection
– Availability of hose by the metre and of fittings
– Installation conditions such as movement sequences, kinking, whipping, identification, offset angle of cur-
ved fittings, leg lengths
– Safe sealing forms (design of sealing head)
T The HANSA-FLEX range of products offers a huge number of hose types manufactured from a wide variety of
different materials. This means that there will be a product to match almost every conceivable application. Since
these many different hose types have to cater for an even larger number of possible applications, a number of
basic questions must be answered before the right hose can be selected:
MAXIMUM PRESSURE
The maximum working pressure (dynamic working pressure) determines the construction and selection of
the hose. Hoses with fabric braid, wire braid and even spiral wire reinforcement are available depending on
the application. The HANSA-FLEX hose programme ranges from hoses with a working pressure of 8 bar up to
extreme-pressure hoses with a working pressure of 1800 bar. Vacuum hoses can be exposed to vacuums of up
to 0.85 bar (absolute).
NOMINAL BORE
The inside diameter (bore) of the hose or tube is of particular importance in any hydraulic system.
When a fluid flows through a line, it loses pressure, and this pressure drop will depend on a mix of factors such as
the type of flow, the roughness of the line’s inside wall, the length of the line and its bore as well as the specific
gravity of the fluid and the flow velocity. This relates to a so-called fully developed pipe flow. However we also
observe a so-called ‘approach section’ which has a significant influence on velocity distribution. Further pressure
is lost when the medium flows through fittings, valves, elbows and other obstructions.
Laminar Flow
Turbulent flow exists when secondary mixing motions are superimposed on the main flow motion. The pressure
drop increases with the square of the velocity.
Turbulent Flow
Turbulent flows predominate in practice. However the correct choice of nominal tube bore can significantly
affect the efficiency of a hydraulic system. Just a 1 % change in the bore of the tube will increase the flow resi-
stance by 5 %, assuming a constant flow rate.
General rules: If you wish to minimise pressure losses, you should choose a sufficiently large bore or clear cross-
section of the tube/hose – if in doubt, opt for the next larger bore. In this way you will reduce the rate of flow and
hence the pressure drops in the line. Generally speaking, the cross-section can be rated quite adequately using
the nomogram to determine the nominal bore of the hose (refer to the section ‘Determining the nominal bore
with the nomogram’). The hose bore should not be increased too much however as this will reduce the maximum
operating pressure/nominal pressure.
The likely operating and ambient temperatures cannot be ignored when selecting the right hose assembly: Using
hoses outside their permitted temperature ranges can be expected to significantly curtail their service life.
The rubbers that are used in HANSA-FLEX standard hydraulic hoses are blended to ensure that the hoses can
usually be operated continuously within a temperature range of -40 to max. 100 °C in (temporarily 125 °C) depen-
ding on type. Different temperatures apply for compressed air. At very low temperatures, rubber blends reach
their so-called glass transition point. The glass transition point is the temperature at which the resilient behaviour
of the material approaches zero, i.e. the material becomes brittle and will break like glass under mechanical
loads. Fine radial cracks on the surface of the internal and external layers of the hose are typical signs of a hose
damaged by glass break.
Prolonged use at high temperatures will also shorten the life of a hose assembly as this prematurely ages the
rubber materials. However the HANSA-FLEX range also includes hose types for temperature ranges that go
beyond the normal limits.
It should also be remembered that the outer cover of a rubber hose is sensitive to environmental influences such
as ozone or strong ultraviolet radiation. Under adverse conditions, ozone and UV rays can break up the chain
molecules of the elastomer material. As a result the material loses its resilience, becomes hard and brittle and
will break in highly stressed areas such as the outer radii on hose lines. Radial cracks that penetrate as far as the
braid reinforcement are a sure sign of this. A line that has suffered this kind of damage will be at the mercy of the
weather and will fail within a short space of time.
MEDIA COMPATIBILITY
T
In all cases it is essential to verify the compatibility of the materials from which the hoses and fittings are made
with the media which they are carrying. HANSA-FLEX hose assemblies are used with many different types of
fluids and gases in practice, and their resistance to these media cannot be predicted in every case. Details given
about resistance to media are for guidance only and can only form the basis for an initial selection of the required
hose; it is vital therefore that practical tests are conducted in important or tricky cases.
CHOICE OF FITTINGS
HANSA-FLEX hose fittings are made as standard from free-maching steel (e.g. material no. 1.0718) with an electro
galvanised surface. Stainless steel fittings (e.g. material no. 1.4571) are also available for special applications.
This material is also known by the designation V4A and is used in the chemical industry as a standard material.
When selecting fittings, ensure that the maximum working or nominal pressure of the fitting matches that of
the hose.
The section of DIN 20066 that deals with requirements and tests states that “If the hose and the hose fitting have diffe-
rent nominal pressures, only the lower nominal pressure may be used for the hose assembly.”
T RELEVANT STANDARDS
Hoses and hose assemblies are standardised elements of hydraulic connection systems. The many different
terms and abbreviations can often cause confusion and so we provide a brief overview at this point. In fluid
power systems, a distinction can be made between pure product standards on the one hand and standards and
guidelines governing the use of these products on the other. An extract from the relevant product standards will
be found elsewhere.
The standards that are most important at the present time are listed below:
HANSA-FLEX hose assemblies are identified using the following reference system:
The first letters and numbers describe the type of hose mount and hose. This is followed by the effective installed
T
length in mm (see Rating System) and the connections at hose ends 1 and 2.
If both hose ends are to be equipped with the same type of fitting, this is only indicated once, additional acces-
sories such as anti-kink protection or particulars about the offset angle of fittings are simply added at the end.
Our reference system is best illustrated by a few examples:
P HD 206 x 1000 HS
Fitting type:
Both ends are fitted with the same fitting
here: Swage nipple with metric male thread PN 06 HS heavy series
or:
Fitting type:
Both ends are fitted with the same fitting
here: hose nipple with seal head and union nut, 90° version
References for other accessories are appended to the order reference of the assembly:
PHD 216 x 620 AJ AJ90 SSK. This hose assembly has an additional SSK plastic chafe guard.
Fittings (swage nipple) for 1 and 2 wire layers and for textile reinforced hoses are always indicated by the
abbreviation PN.
or
The swage fittings for extreme pressure hoses in the series HD 400, 500, 600 and 700 are always indicated by
the abbreviation PA. This type of reference refers to the fitting and the mount together as a pair.
How can we now determine the bore of a hydraulic line? In most cases the user will know the pump’s delivery rate
and the working pressure. The table below gives guideline values for flow rates relative to working pressure; the
T
value assigned to the working pressure is determined first.
T The value for the flow rate is entered in the right-hand column of the nomogram, the value for the delivery rate
in the left-hand column.
The point of intersection of the line connecting these two values gives the value for the required line bore, note
the dimensions:
Q (l/min) v (m/s)
1.000 0,1
900
800
700
0,15
600
500 Bore (mm)
Durchm. (mm) Area (cm²)
Fläche (cm2) 0,2
400 0,25
0,3
300
100 0,4
100 80
200 0,5
80
0,6
150 40
0,7
60
0,8
50 20 0,9
100 1
90 40
80 1,2
10
70 32 8
60 1,5
6,3
25 5
50
4 2
40 20 3,15
2,5 2,5
16 2
30 1,6 3
13 1,25
1 4
10 0,8
20 0,63 5
8 0,5
6
15 0,4
0,315 7
6
0,25 8
5 0,2 9
10 10
9 4
8 0,1
7
3 15
6
0,05
5 20
4
30
3
1,5
Example:
A system has an operating pressure of 130 bar and a flow rate Q = 60 l/min. We want to find the appropriate bore
for the hose.
Solution:
Mark the value for Q in the nomogram, select the value 5.0 m/s from the table “Guide values for flow rates” and
enter this in the nomogram in the v-column. Now draw a straight line connecting the values in the right and left
hand columns. The point where the line intersects the middle column gives the value for the bore of the hose, in
this case: d = approx. 16 mm
Hose assemblies with offset fittings are designated as follows: The first connection always points up. With an off-
set of 90 degrees, the second fitting is turned counter-clockwise by 90 degrees, as shown in the lower graphic.
This rule is used to determine the fitting offset with HANSA-FLEX orders; other manufacturers or customers may
specify this offset differently. The offset must always be checked accordingly therefore.
Direction of
viewing
Blickrichtung
270 degree
Versatz offGrad
um 270 set
Versatz um 90
90 degree offGrad
set
st
11. connection
Anschluss 2nd
2.connection
Anschluss
With the re-issue of DIN 20066 in October 2002, the direction of the offset angle was standardised for the first time.
HANSA-FLEX has now adopted this standard and has changed its original reference from “clockwise” to “counter-
clockwise”. The new direction of rotation is indicated in the reference system by a “V” in front of the angle and an “N”
after it.
The potential hazard posed by high-pressure lines to personnel and the environment is often underestimated
in practice. Oil needles, burst fittings and burst lines can even result in fatalities in extreme cases. This section
T
therefore describes our own experience and explains the requirements contained in the various relevant regu-
lations and standards.
Because the elastomers used to manufacture hydraulic connectors undergo an ageing process, there is a limit
to their storage lives and service lives. Incorrectly stored hydraulic hoses can become prematurely brittle, for
example. We have already mentioned the harmful effects that ozone and strong UV rays can have.
Important: Arc welding gives off high levels of ozone, so thorough ventilation should always be provided when wel-
ding work is carried out. Hose sold by the metre should be stored as far away as possible from locations where welding
is carried out. Significant amounts of ozone are also produced at the carbon brushes of electric motors and the starters
of sodium vapour lamps.
Because of their ageing process, the storage and service lives of hose assemblies is laid down in the regulations of the
employers liability insurance associations and in the current version of DIN 20 066 and DIN 7716:
GENERAL
The physical properties of most rubber products will change under unfavourable storage conditions or if
handled incorrectly. The result can be a reduced service life, with the products being rendered unserviceable by
excessive hardening, softening and permanent deformation as well as flaking, cracking or other surface defects.
These alterations can be brought about by the action of oxygen, ozone, heat, light, humidity, solvents or by
storage under stress.
If properly stored and handled, rubber products will remain virtually unchanged in their properties over long
periods (several years). This does not apply to non-vulcanised rubber blends however.
STOREROOM
The storeroom should be cool, dry, free of dust and adequately ventilated. Storage outdoors – even if protected
from the weather – is not permissible.
T TEMPERATURE
The temperature at which rubber products are stored depends on the products to be stored and the elastomers
that are used. Rubber products should not be stored at temperatures below –10 °C or over +15 °C; the upper limit
may be exceeded up to +25 °C. Higher temperatures than these are only temporarily permissible.
However products made from certain types of rubber such as chloroprene rubber may require a storage tem-
perature that is never less than +12 °C. The most favourable storage temperature for non-vulcanised rubber
products and rubber blends as well as adhesives and solvents is between +15 °C and +25 °C. Temperatures higher
than this must be avoided, lower temperatures should be avoided. Adhesives and solvents should not be stored
below 0 °C.
Products that are exposed to low temperatures during storage and transport may become stiff or lose their
adhesive power. These products should be conditioned at temperatures of +20 °C or more for a time before
commissioning or further processing. This is best done while they are still in their packaging as this will avoid
moisture accumulating on the product itself.
HEATING
In heated storerooms, rubber products must be shielded from the heat source. The distance between the heat
source and the goods in storage must be at least 1 m. A greater distance is required in wind heated rooms.
HUMIDITY
Avoid storage in humid rooms. Care must be taken to prevent condensation. Humidity should be kept below
65 %.
LIGHTING
The products should be protected from light, especially from direct sunlight and strong artificial lighting with a
high ultraviolet component.
The storeroom windows should therefore be coated with red or orange protective paint (never blue).
Preference should be given to illumination with standard type bulbs.
OTHER FACTORS
Solvents, fuels, lubricants, chemicals, acids, disinfectants and similar products should not be kept in the store-
room. Rubber solutions must be stored in a special room according to the official regulations governing the
storage and handling of flammable fluids.
Care must be taken to ensure that the products are stored free from stress, i.e. not under tension, compression
or other deformations, as stresses can result in permanent distortion and crack formation (O-rings for example
should not be stored hanging on hooks). Certain metals, especially copper and manganese, have an adverse
effect on rubber products. The products must not be stored in contact with these metals but be protected by
packaging or by a layer of suitable material. Articles such as antistatic films or bags made from paper, polyethy-
lene or polyamides (nylon) are suitable for this purpose.
The materials of the containers for packing and cover material must not contain any substances harmful to the
products, e.g. copper or cuprous alloys, petrol, oil or similar substances. Films that contain plasticizers must not
be used for packing. If the products are powdered, the powder must not contain any substances harmful to
them. Suitable substances for powdering are talcum, whiting, fine mica powder and rice starch. Contact between
products of different compositions should be avoided. This applies in particular to rubber products of different
colours. The products should remain in store for as short a time as possible. Where products are stored for longer
periods of time, care should be taken to ensure that new products are stored separately from existing articles.
N.B.: It is standard business practice to store hydraulic hoses are stored according to the FIFO principle.
FIFO (First In First Out) describes a method of storage in which the date of entry into store determines the date
of withdrawal. This means that the hose that has been stored longest is used first. Stainless steel reinforcements
must be protected from rust film.
“Rubber products can be cleaned with soap or warm water. The cleaned articles must be dried at room tempera-
ture. After longer periods of storage (6 to 8 months) the products can be cleaned with a 1.5 % solution of sodium
bicarbonate. Traces of cleaning fluid should be rinsed off with water. Effective and particularly gentle cleaning
products are recommended by the manufacturer.
Solvents such as trichlorethylene, carbon tetrachloride and hydrocarbons must not be used for cleaning. The
use of sharp objects, wire brushes, emery cloth etc. must also be avoided. Rubber-to-metal composites should
be cleaned with a mixture of glycerine and ethyl alcohol (1:10). If disinfection is necessary, it should be carried
out after the rubber products have been thoroughly cleaned. The disinfectant must not be used as a cleaning
product at the same time.
Choose a disinfectant that is compatible with rubber. Oxygen or halogen releasing products such as potassium
permanganate or chlorinated lime in particular can be harmful, especially to products with thin walls.
Rubber products for medical uses may only be disinfected using the products recommended by the manufac-
turer. The service life of certain rubber goods can be extended by a special coating (wax emulsion, shellac and
similar products). Such coatings are not recommended for rubber products for medical use.” It should be noted
that special cleaning and storage processes will be essential if there is a requirement for freedom from silicone.
The latest version of DIN 20066 lays down the following requirements:
“Even when properly stored and protected from excessive stress, hoses and hose assemblies undergo a process of
natural ageing. Their service life is limited as a result. Incorrect storage, mechanical damage and excessive stress are
the most frequent causes of failure. In individual cases the service life can be defined as follows based on practical
experience, and contrary to the following guide values: When constructing the hose assembly, the hose (as sold by the
metre) should not be more than four years old.
The service life of a hose assembly including any storage time of the hose assembly should not exceed six years. The
storage period itself should not exceed two years.”
Lagerungs- undservice
Storage and Verwendungsdauer
life accordinggem. DIN
to DIN 20066
20066
max. max. 4 Jahreage
4 years max. 6max. 6 Jahre
years service life
Alter der Schlauchware Verwendungsdauer der Schlauchleitung
of hose material of hose assembly
max.2 Jahre
max. 2 years storage
Lagerdauer
Schlauchleitung
life of hose assy.
Herstellungsdatum
Date of manufacture of Herstellungsdatum
Schlauchware Date of manufacture of hose assy.
Schlauchleitung
hose matl.
INSPECTION CRITERIA
T
The safety rules for hydraulic hose assemblies of the German Federation of the statutory accident insurance insti-
tutions for the industrial sector, and the latest version of DIN 20066, state that the functional capability of hose
assemblies must be assessed at specified intervals.
The relevant rules lay down clear criteria for the replacement of hose assemblies; hose assemblies must be
replaced when an inspection reveals the following damage:
– Damage to the outer cover of the hose down to the reinforcement, e.g. from chafing, cuts or cracks.
– Embrittlement of the outer cover through cracking of the hose material.
– Deformation which does not conform to the natural shape of the hose or hose assembly, whether under
pressure or not, or during bending, e.g. separation of layers, blistering.
– Damage or deformation of the hose fitting (compromised sealing function); minor surface damage is not a
reason for replacement.
– Hose working loose from its fitting.
– Corrosion to the fitting that affects function and strength.
– Installation instructions not followed.
– Storage life and service life expired.
The current version of DIN EN 982 “Safety of machinery – Safety requirements for fluid power systems and their
components” should be mentioned in this context; this standard lays down clear guidelines for the repair of hose
assemblies for hydraulic connections. It states for example that:
“Flexible hose assemblies shall not be constructed from hoses which have been previously used as part of the hose
assembly. Flexible hose assemblies shall fulfill all performance requirements specified in the appropriate European
and/or international standard(s). Hose manufacturer’s instructions for storage must be followed. The recommenda-
tion of a service life for hose assemblies should be taken into consideration.”
We would point out that DIN EN 982 is a B2 standard and as such has quasi-statutory status, i.e. it may form the
basis of a judicial decision in legal cases. This fact should be borne in mind in the event of claims for liability.
Given the previously mentioned natural ageing process to which hoses and hose assemblies are prone, appro-
priate product identification is an important requirement laid down in the relevant standards and safety regu-
lations.
DIN 20066:
“Every hose assembly must be permanently identified with the mark of the hose assembly manufacturer, the assembly
date (year and month) and the maximum permitted dynamic working pressure of the hose assembly.”
The identification of hose sold by the metre is laid down in the respective hose standards. The current version of
EN 853 for example states that:
Hoses must be continuously identified with the following minimum particulars at intervals of 500 mm:
– the name and mark of the manufacturer, e.g. HANSA-FLEX
– the number of this European standard EN 853
– the type, e.g. 2 SN
– the nominal bore size, e.g. DN16
– the quarter and last two digits of the year of manufacture, e.g. 4Q06
Example:
Standard
Quarter of manufacture
TORSION
If a hose assembly is installed in a twisted position, the mutual friction between the layers of reinforcement will
significantly curtail service life. The layers of reinforcement are subjected to pulsating pressure and tend to return
to their neutral initial position. The result will be excess stress at the point of hose retention!
wrong right
When the assembly is installed therefore it is essential to ensure that it cannot twist on itself, e.g. when the union
nuts are tightened! (Hold in position with a wrench.)
OVER-BENDING
Over-bending a hose assembly beyond its minimum bending radius will inevitably reduce its service life and
loading capacity, with gaps appearing in the wire braid on the outside bend as a result of the larger area that it
has to cover. This can result in so-called ‘oil needles’.
A maximum permitted bending radius is prescribed for every hose type depending on its nominal bore.
The opposite effect occurs on the inside bend: The layers of reinforcement are upset – they do not lie close
enough to the inner layer and lose their pressure-bearing properties as a result.
Over-bending usually occurs (and this is frequently overlooked) immediately after the connection, when it is
kinked too sharply.
wrong right
Provided the installation conditions allow, a bend in a hose assembly should be introduced following a straight
section whose length is 1.5 times the hose outside diameter. An anti-kinking sleeve or similar device should be
fitted in such cases if necessary.
wrong right
In some cases it is also possible to prevent over-bending by the judicious selection of suitable fittings:
wrong right
Caution: “Oil needles” are fine jets of fluid that penetrate the hose wall through to the exterior under high pres-
sure. If such jets occur, the system must be immediately shut down; persons must not come into contact with
T
the jets under any circumstances! A jet of this type will immediately penetrate human tissue where it will spread.
Hydraulic fluids are contaminated with bacteria which can cause life-threatening blood poisoning when such
injuries occur! Such injuries may not even be painful because of their small size and the high pressure. A doctor
must be consulted immediately if hydraulic oil penetrates human tissue!
ABRASION
If a hose is laid across an edge, its outer layer can chafe through as a result of the hose’s inherent movements.
This also applies to hoses that are laid in close proximity to one another: The hoses will chafe each other to the
point of rupture.
Outcome: The wire braid is no longer protected from corrosion and failure is just a matter of time.
Hoses are also available with an extra layer of protective PVC, however they have the disadvantage of a higher
bending radius that makes the hoses stiffer. The action of the plasticizer that is present in the material of PVC
hoses must also be taken into consideration.
wrong right
T TENSILE STRESS
Tensile stresses on hose assemblies must be avoided at all cost as this will compromise the secure retention
of the hose. Please remember that hose assemblies can become slightly shorter when under pressure, so they
should always be installed with a certain amount of slack, and possible movement cycles must also be taken into
account:
wrong right
wrong right
* Note: There are certain applications where tensile stresses cannot be avoided, e. g. spring-loaded tension rollers.
In this case the maximum permitted operating loads must be agreed with the manufacturer.
HOSE CLIPS
Hose clips should be avoided where they would impede the hose’s natural movement and change in length:
The reversal of the pulsating oil flow sets up a pumping motion in the bend in the hose shown on the left, the
outer layer will eventually be destroyed by the hose chafing in the clip.
Hose clips should therefore only be installed in straight hose sections so far as possible. Changes in the diameter
of the hose must also be allowed for.
wrong right
WHIPPING
T
The dangerous ‘whipping’ that occurs when a hose ruptures can be prevented by the appropriate design. The
HANSA-FLEX Stopflex safety system that achieves a secure connection between hose and machine component
is particularly suited for installation in both new and existing systems. The following items are suitable for retro-
fitting:
– Covers
– Duct guides
COLD FLOW
Even without the effect of temperature, elastomers do not display an ideally elastic behaviour. Despite its che-
mical and physical crosslinking, the rubber material can have a tendency to creep even between the nipple and
the mount. This viscoelastic behaviour leads to leaks around the hose mount or causes the hose fitting to ‘drift’.
Peeling the top rubber (outer layer) within the prescribed area can eliminate at least this potential hazard on the
hose.
Permeation or effusion, i.e. the potential migration of gas molecules through the inner layer of the hose, must
be taken into consideration when selecting a suitable hose. This effect is also dependent on pressure. The conse-
quence is a loss of medium or accidental concentrations of gases or gaseous fuels and combustibles. These gases
are potentially flammable, explosive or toxic. The selective discharge of possible gas concentrations beneath the
outer cover is known as ‘pricking’, a technique that is used with compressed air lines over 16 bar or with hot water
hoses, for example.
T CAVITATION
BASIC PRINCIPLES
Cavitation occurs in a fluid flow system when the local static pressure falls below the vapor pressure, and the fluid
spontaneously evaporates in the confined space. The result is vapour-filled fluid cavities. These vapour bubbles
implode when the original pressures are reached. The implosion sets up pressure waves that peak locally at
hundreds of bar and with frequencies of several thousand Hertz. Cavitation can also occur when back-pressures
are unacceptably low (0.8 to 0.7 bar absolute). Air that is dissolved in the oil is released in a vacuum. On the high-
pressure side these bubbles are immediately compressed again, including under the influence of temperature.
EFFECTS OF CAVITATION
The harmful effects of these ‘blows’ on the material surface of hose walls are enormous. Within just a few hours
the surface will sustain a ‘woodworm-type’ attack, and sections of hose wall or flow guides will break away. Vibra-
tion with reaction forces of high magnitude can also take place.
CAUSES OF CAVITATION
STATIC ELECTRICITY
BASIC PRINCIPLES
T
Static electricity is an electrical charge that accumulates on the surface of materials of the same or different type
following a mechanical separation.
Mechanical separation occurs:
Prime examples include cleaning processes that use steam or water jet appliances, paint spraying, solvent trans-
port and the handling of fuels and combustibles in solid or liquid form.
The level of electrical charge depends on the intensity and extent of the separation processes, not on the con-
ductivity of the materials used.
If the charge is strong enough, a discharge will take place in the form of sparks, brush discharge or corona
discharge, with the possible ignition of an explosible atmosphere as a result.
Ignitable discharges can occur between an insulated or earthed conductive object and a
– charged insulated conductive object, and
– a charged non-conductive material.
Proper earthing is therefore vitally important, especially when using non-conductive items of equipment or such
items in combination with conductive equipment.
Reference regulations:
– Guidelines “Static Electricity”, BGR 132 (was ZH 1/200)
– “Hose Assemblies – Safe Use”, BGI 572 (was ZH 1/134)
Electrically chargeable materials such as rubbers and synthetics can be made adequately conductive by con-
structional measures, e.g. metal reinforcement or additives such as soot. Consideration should be given to the
possible loss of conductivity caused by damage to the hose reinforcement or the loss of continuity between the
reinforcement and the hose fitting, as well as by segregation or structural alterations.
In hose assemblies, the amount of static charge depends largely on the flow velocity. The charge current rises as
the flow rate increases, while at a constant flow rate it rises with an increasing nominal bore and/or tube diame-
ter. Electrostatic charges can also be observed if there is a strong or sudden change in the direction of flow.
T The flow rate should not exceed 6 m/sec when using standard hoses. Steam transmission is made critical by the
high flow rates that are caused by adiabatic expansion. In conditions of free expansion, velocities of more than
16m/sec occur. Since this expansion will result in a charge of static electricity, ensuring the electrical conductivity
of hose products and hose assemblies is a matter of the utmost importance. The electrical resistance between
the fittings of a hose assembly must be less than or equal to 106 Ω in the dry condition with the assembly exten-
ded.
Hazardous charges of static electrricity can be expected to occur in the presence of vapours, or when cleaning
and filling containers and tanks. These discharge energies are enough to ignite mixtures of gas and vapour or
dust and air. Hazardous areas can also exist around open jetting operations with steam (steam jet degreasers)
and the spraying of insulated conductors with the charged open jet owing to the very high exit velocities of the
vapour from the nozzle and its consequent expansion. Dangerous discharges can even occur in saturated steam
when escaping from a rubber hose. The presence of water vapour in a container or tank will not reduce the
charge of the fluid or minimise the field strengths in the vapour chamber.
It is well known that hose assemblies can alter axially and radially under pressure, undergoing a negative or
positive linear change; an increase in diameter is also often observed.
This behaviour is by no means ideal, unlike the behaviour of steels springs which can be readily identified and
calculated. Detecting alterations in hose assemblies is based on tests carried out on a specific test specimen, i.e.
by a ‘volumetric expansion test’.
The positive or negative linear change must be allowed for when determining the length of hose assemblies so
as to prevent hoses from kinking and fittings from being pulled out. Increases in diameter can pose a problem
with hose fastenings that are too tight and insufficiently elastic, or when the hose assembly is used as a control
line. Pressure and volume are known to be characteristic variables that affecting triggering response and hence
the characteristics of a control circuit. It should also be remembered that intentional increases in volume can help
mitigate pressure peaks (buffer function).
These alterations are a function of the braid angle, the material and the type of braiding used for the reinforce-
ment. These three criteria determine the mechanical properties of the hose which in turn bring about alterations
T
in behaviour. Pressure and nominal bore are also parameters which can lead to alterations in a hose assembly.
Finally, a knowledge of the ultimate elongation and tensile strength of the hose reinforcement can be used to
calculate the bursting pressure of the hose, and this will then find its way into the relevant standards after the
completion of a series of tests and experiments. Conversely, technical specifications for the design of a particular
type of reinforcement can of course result in the defined product when applied in conjunction with experience
gathered in the field of hydraulic hose development.
The relevant standards and manufacturers’ instructions may quote numerical values, but these general figures
are no substitute for practical experience with axial expansion and contraction, or changes in diameter. They can
only give an indication that changes occur and in what orders of magnitude (extreme limits) they can be expec-
ted. A qualitative assessment and analysis must assume that a change in volume will always mean a change in
linear extension and diameter.
It is a fact that even with new designs and original equipment, insufficient attention is given to these pheno-
mena, with the result that maintenance engineers are inevitably faced with the duty of not accepting enginee-
ring solutions without criticism. This applies especially to the necessary rating of the hose assembly length.
1
Hoses
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
TAF type high pressure hose with copper braid TAF 100 CU
Application: Electrically conductive paint spraying hose with
high flexibility and low weight
Special features: high resistance to light, weathering, aging,
chemical media. Favourable flow properties; with copper braid
Inner layer: Polyamide
Insert: one polyester braided insert with interweaved copper
braid for dissipation of electrostatic charge
1
Outer layer: NW 4: Polyamide; from NW 6: Polyurethane
Colour: black
Min. temperature: -60 °C
Max. temperature: +80 °C
Elongation: +3 % to -1 %
Media: resistant to many technical media – in particular the
paints and solvents used in paint spraying
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) issued by the employers‘ liability
insurance association. Follow these guidelines when fitting.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) issued by the employers‘ liability
insurance association. Follow these guidelines when fitting.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) issued by the employers‘ liability
insurance association. Follow these guidelines when fitting.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Fitting with press and screw connections.
Paint spraying hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) issued by the employers‘ liability
insurance association. Follow these guidelines when fitting.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Note: The change in length of the hose is determined at max. operating pressure during testing to EN ISO 1402.
Operating Burst
Designation Internal Ø External Ø Wall thickness pressure pressure
mm mm mm bar bar
BREMS 11-3,5 11 18 3,5 10 25
BREMS 13-6 13 25 6,0 10 20
Burst
Designation Thread pressure Length
bar mm
FP 104-300 HM M 10 x 1 1000 300
FP 104-500 HM M 10 x 1 1000 500
FP 104-300 HR R 1/8“ K 1000 300
FP 104-500 HR R 1/8“ K 1000 500
Operating Burst
Designation Internal Ø External Ø Wall thickness pressure pressure
mm mm mm bar bar
AUTOGEN BLAU 6-3,5 6 13 3,5 20 60
AUTOGEN BLAU 6-5 6 16 5,0 20 60
Operating Burst
Designation Internal Ø External Ø Wall thickness pressure pressure
mm mm mm bar bar
AUTOGEN ROT 6-3,5 6 13 3,5 20 60
AUTOGEN ROT 9-3,5 9 16 3,5 20 60
Tools 2
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Designation
ERSATZKLINGE
Hose protection
3
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Designation Internal Ø
mm
FBS 014 14
FBS 016 16
FBS 018 18
FBS 020 20
FBS 022 22
FBS 024 24
FBS 025 25
FBS 026 26
FBS 028 28
FBS 030 30
FBS 032 32
FBS 035 35
FBS 038 38
FBS 040 40
FBS 042 42
FBS 045 45
FBS 047 47
FBS 050 50
FBS 055 55
FBS 056 56
FBS 060 60
FBS 068 70
FBS 080 80
Hose fittings
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Designation d1 d2 S 4
mm mm mm
SF DR 1 P 3700 19,0 25,8 5,0
SF DR 1 P 3702 25,4 32,2 5,0
SF DR 1 P 3703 31,9 38,7 5,0
SF DR 1 P 3704 38,2 45,0 5,0
SF DR 1 P 3705 44,7 51,5 5,0
SF DR 1 P 3706 51,1 57,9 5,0
SF DR 1 P 3707 54,2 61,0 5,0
SF DR 1 P 3708 57,4 64,2 5,0
SF DR 1 P 3709 63,9 70,7 5,0
Note: The max. operating pressure (PB) depends on the property class of the screws (8.8 or 10.9).
4 Recommended screws are listed in the columns M (metr) and M (unc).
Note: The max. operating pressure (PB) depends on the property class of the screws (8.8 or 10.9).
Recommended screws are listed in the columns M (metr) and M (unc). 4
Pressure Pressure
Designation (PB) (PB) Flange A B D C L M M
8.8 bar 10.9 bar size mm mm mm mm mm (metr) (unc)
SFH 6 13 350 400 1/2“ 32,54 7,24 56,0 40,49 8,75 M 8 x 30 5/16 x 1.1/4
SFH 6 20 350 400 3/4“ 42,06 8,26 71,0 50,80 10,75 M 10 x 35 3/8 x 1.1/2
SFH 6 25 350 400 1“ 48,41 9,02 81,0 57,17 13,00 M 12 x 45 -
SFH 6 32 350 400 1.1/4“ 54,76 9,78 95,0 66,68 14,75 M 14 x 45 -
SFH 6 40 350 400 1.1/2“ 64,29 12,07 113,0 79,38 17,00 M 16 x 55 5/8 x 2
SFH 6 50 350 400 2“ 80,16 12,07 133,0 96,82 21,00 M 20 x 70 3/4 x 2.1/2
Note: The max. operating pressure (PB) depends on the property class of the screws (8.8 or 10.9).
4 Recommended screws are listed in the columns M (metr) and M (unc).
Pressure Pressure
Designation (PB) (PB) Flange A B C D L M M
8.8 bar 10.9 bar size mm mm mm mm mm (metr) (unc)
SFH 9 20 350 400 3/4“ 42,06 13,3 50,80 71,0 10,75 M 10 x 35 3/8 x 1.1/2
SFH 9 25 350 400 1“ 48,41 13,3 57,17 81,0 13,00 M 12 x 45 -
SFH 9 32 350 400 1.1/4“ 54,76 13,3 66,68 95,0 15,0 M 14 x 45 -
SFH 9 40 350 400 1.1/2“ 64,29 13,3 79,38 111,0 17,0 M 16 x 55 5/8 x 2
Note: The max. operating pressure (PB) depends on the property class of the screws (8.8 or 10.9).
Recommended screws are listed in the columns M (metr) and M (unc). 4
Pressure Pressure
Designation (PB) (PB) Flange A B C D E F L M M
8.8 bar 10.9 bar size mm mm mm mm mm mm mm (metr) (unc)
SFH 13 4 L 350 350 1/2“ 30,96 6,22 38,10 54,0 17,48 45,60 8,75 M 8 x 25 5/16 x 1.1/4
SFH 20 4 L 350 350 3/4“ 38,89 6,22 47,63 65,0 22,23 51,80 10,75 M 10 x 30 3/8 x 1.1/4
SFH 25 4 L 250 315 1“ 45,24 7,49 52,37 70,0 26,19 58,40 10,75 M 10 x 30 3/8 x 1.1/4
SFH 32 4 L 200 250 1.1/4“ 51,59 7,49 58,72 79,0 30,18 72,60 12,00 M 10 x 30 7/16 x 1.1/2
SFH 40 4 L 200 200 1.1/2“ 61,09 7,49 69,85 94,0 35,71 82,20 13,50 M 12 x 35 1/2 x 1.1/2
SFH 50 4 L 160 200 2“ 72,24 9,02 77,77 102,0 42,88 93,40 13,50 M 12 x 35 1/2 x 1.1/2
SFH 60 4 L 100 160 2.1/2“ 84,94 9,02 88,90 114,0 50,80 108,20 13,50 M 12 x 40 1/2 x 1.1/2
SFH 75 4 L 100 160 3“ 102,39 9,02 106,38 135,0 61,93 130,60 17,00 M 16 X 50 5/8 x 2
SFH 100 4 L 35 35 4“ 127,79 10,72 130,18 162,0 77,77 152,00 17,00 M 16 x 50 5/8 x 2
Note: The max. operating pressure (PB) depends on the property class of the screws (8.8 or 10.9).
4 Recommended screws are listed in the columns M (metr) and M (unc).
Pressure Pressure
Designation (PB) (PB) Flange A B C D E F L M M
8.8 bar 10.9 bar size mm mm mm mm mm mm mm (metr) (unc)
SFH 6 13 4 L 350 400 1/2“ 32,54 7,24 40,49 56,0 18,24 47,20 8,75 M 8 x 30 5/16 x 1.1/4
SFH 6 20 4 L 350 400 3/4“ 42,06 8,26 50,80 71,0 23,80 60,00 10,75 M 10 x 35 3/8 x 1.1/2
SFH 6 25 4 L 350 400 1“ 48,41 9,02 57,15 81,0 27,76 69,90 13,00 M 12 x 45 -
SFH 6 32 4 L 350 400 1.1/4“ 54,76 9,78 66,68 95,0 31,75 77,20 14,75 M 14 x 45 1/2 x 1.3/4
SFH 6 40 4 L 350 400 1.1/2“ 64,29 12,07 79,38 113,0 36,50 95,00 17,00 M 16 x 55 5/8 x 2
SFH 6 50 4 L 350 400 2“ 80,16 12,07 96,82 133,0 44,45 113,80 21,00 M 20 x 70 3/4 x 2.1/2
4
Designation DN G1 SW*
mm mm
SUEM 03 R 04 3 G 1/8“ -28 14
SUEM 04 R 06 5 G 1/4“ -19 17
SUEM 06 R 6 G 1/4“ -19 17
SUEM 08 R 10 8 G 3/8“ -19 19
SUEM 10 R 13 10 G 1/2“ -14 24
4
Designation DN G1 SW*
mm mm
SUEM 02 L 3 M 10 x 1 12
SUEM 04 L 5 M 12 x 1,5 14
SUEM 06 L 6 M 14 x 1,5 17
SUEM 08 L 8 M 16 x 1,5 19
SUEM 10 L 10 M 18 x 1,5 22
SUEM 13 L 12 M 22 x 1,5 27
SUEM 16 L 16 M 26 x 1,5 32
Swage nipple PN HR
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: BSP cylindrical outer thread
Seal type: flat seal
Standard: ISO 228-1 DN G1
Standard code: AGR
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
Swage nipple PN HB
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: BSP cylindrical outer thread
Seal type: 60° inner cone
Standard: ISO 228-1 (BS 5200) DN G1
Standard code: AGR
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 710 HB 10 6 3/8“ G 3/8“ -19 70,5 22
PA 713 HB 12 8 1/2“ G 1/2“ -14 79,3 27
PA 716 HB 16 10 5/8“ G 5/8“ -14 92,8 30
PA 720 HB 19 12 3/4“ G 3/4“ -14 97,5 32
PA 725 HB 25 16 1“ G 1“ -11 114,5 41
Swage nipple PN AR
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: BSP nut thread
Seal type: flat seal
Standard: ISO 228-1 DN G1
Standard code: DKR flat seal
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
1
yellow chromized
G
Note: Choose the appropriate mount based on the hose type.
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 10 AR 13 45 10 6 3/8“ G 1/2“ -14 89,0 21,0 27
PN 13 AR 45 12 8 1/2“ G 1/2“ -14 91,0 21,0 27
PN 13 AR 20 45 12 8 1/2“ G 3/4“ -14 96,0 25,0 32
PN 16 AR 20 45 16 10 5/8“ G 3/4“ -14 100,0 25,0 32
PN 20 AR 25 45 19 12 3/4“ G 1“ -11 120,0 28,0 41
Swage nipple PN AB
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: BSP nut thread
Seal type: 60° outer cone
Standard: ISO 228-1 (BS 5200) DN G1
Standard code: DKR
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
1
G
Surface protection: electro galvanised,
yellow chromized
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
1
G
Surface protection: electro galvanised,
yellow chromized
4
Designation DN Size Inch G1 L1 L2 S1 OR
mm mm mm mm mm
PA 710 AOB 90 10 6 3/8“ G 3/8“ -19 - - 22 8,1 x 1,6
PA 713 AOB 90 12 8 1/2“ G 1/2“ -14 87,0 40,5 27 12,0 x 1,5
PA 720 AOB 90 19 12 3/4“ G 3/4“ -14 127,5 68,2 32 17,1 x 1,6
PA 725 AOB 90 25 16 1“ G 1“ -11 158,0 81,7 41 22,1 x 1,6
1
Surface protection: electro galvanised,
G
yellow chromized
Swage nipple PN SF
Application: for HD 100 to HD 400, KP and
TE hoses
DN D
Connection 1: SAE flange connection 3000
PSI
Seal type: flat seal with SF O-ring
Standard: ISO 6162 H
Standard code: SFL L1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D
Material: Steel
Surface protection: electro galvanised,
yellow chromized
4
Designation DN Size Inch Flange D H L1
mm size mm mm mm
PA 713 SF 12 8 1/2“ 1/2“ 30,2 6,7 90,4
PA 713 SF 20 12 8 1/2“ 3/4“ 38,1 6,7 91,6
PA 716 SF 20 16 10 3/8“ 3/4“ 38,1 6,7 102,6
PA 720 SF 19 12 3/4“ 3/4“ 38,1 6,7 116,5
PA 720 SF 25 19 12 3/4“ 1“ 44,5 8,0 119,5
PA 725 SF 20 25 16 1“ 3/4“ 38,1 6,7 132,0
PA 725 SF 25 16 1“ 1“ 44,5 8,0 135,5
PA 725 SF 32 25 16 1“ 1.1/4“ 50,8 8,0 138,5
4
Designation DN Size Inch Flange D H L1 L2
mm size mm mm mm mm
PA 713 SF 45 12 10 1/2“ 1/2“ 30,2 6,7 94,5 22,5
PA 713 SF 20 45 12 10 1/2“ 3/4“ 38,1 6,7 126,0 26,5
PA 720 SF 45 19 12 3/4“ 3/4“ 38,1 6,7 132,5 27,4
PA 720 SF 25 45 19 12 3/4“ 1“ 44,5 8,0 134,6 29,5
PA 725 SF 45 25 16 1“ 1“ 44,5 8,0 159,0 28,6
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 713 SF 90 12 10 1/2“ 1/2“ 30,2 6,7 85,9 45,0
PA 713 SF 20 90 12 10 1/2“ 3/4“ 38,1 6,7 96,0 51,0
PA 720 SF 90 19 12 3/4“ 3/4“ 38,1 6,7 127,5 58,0
PA 720 SF 25 90 19 12 3/4“ 1“ 44,5 8,0 127,5 61,0
PA 725 SF 20 90 25 16 1“ 3/4“ 38,1 6,7 143,5 65,5
PA 725 SF 90 25 16 1“ 1“ 44,5 8,0 158,0 67,0
PA 725 SF 32 90 25 16 1“ 1.1/4“ 50,8 8,0 158,0 69,5
D
Material: Steel
Surface protection: electro galvanised,
yellow chromized
4
Designation DN Size Inch Flange size D H L1
mm mm mm mm
PA 713 SF 6 12 8 1/2“ 1/2“ 31,8 7,7 90,4
PA 713 SF 6 20 12 8 1/2“ 3/4“ 41,3 8,8 93,9
PA 716 SF 6 13 16 10 5/8“ 1/2“ 31,8 7,7 108,0
PA 716 SF 6 20 16 10 5/8“ 3/4“ 41,3 8,8 102,0
PA 716 SF 6 25 16 10 5/8“ 1“ 47,6 9,5 103,0
PA 720 SF 6 19 12 3/4“ 3/4“ 41,3 8,8 124,5
PA 720 SF 6 25 19 12 3/4“ 1“ 47,6 9,5 129,0
PA 725 SF 6 20 25 16 1“ 3/4“ 41,3 8,8 134,0
PA 725 SF 6 25 16 1“ 1“ 47,6 9,5 146,5
PA 725 SF 6 32 25 16 1“ 1.1/4“ 54,0 10,3 151,0
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 713 SF 6 45 12 8 1/2“ 1/2“ 31,8 7,7 95,5 23,0
PA 713 SF 6 20 45 12 8 1/2“ 3/4“ 41,3 8,8 99,9 23,0
PA 716 SF 6 13 45 16 10 5/8“ 1/2“ 31,8 7,7 114,0 21,5
PA 716 SF 6 20 45 16 10 5/8“ 3/4“ 41,3 8,8 117,5 25,0
PA 716 SF 6 25 45 16 10 5/8“ 1“ 47,6 9,5 121,0 29,0
PA 720 SF 6 45 19 12 3/4“ 3/4“ 41,3 8,8 135,3 30,2
PA 720 SF 6 25 45 19 12 3/4“ 1“ 47,6 9,5 139,6 34,4
PA 725 SF 6 20 45 25 16 1“ 3/4“ 41,3 8,8 154,0 32,5
PA 725 SF 6 45 25 16 1“ 1“ 47,6 9,5 136,9 33,6
PA 725 SF 6 32 45 25 16 1“ 1.1/4“ 54,0 10,3 168,9 38,5
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 725 SF 6 60 25 16 1“ 1“ 47,6 9,5 - -
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 713 SF 6 20 90 12 8 1/2“ 3/4“ 41,3 8,8 92,5 46,0
PA 713 SF 6 90 12 8 1/2“ 1/2“ 31,8 7,7 86,0 46,0
PA 716 SF 6 13 90 16 10 5/8“ 1/2“ 31,8 7,7 108,0 48,0
PA 716 SF 6 20 90 16 10 5/8“ 3/4“ 41,3 8,8 107,5 52,5
PA 716 SF 6 25 90 16 10 5/8“ 1“ 47,6 9,5 108,0 57,0
PA 720 SF 6 25 90 19 12 3/4“ 1“ 47,6 9,5 127,5 68,0
PA 720 SF 6 90 19 12 3/4“ 3/4“ 41,3 8,8 127,5 62,0
PA 725 SF 6 20 90 25 16 1“ 3/4“ 41,3 8,8 143,5 67,5
PA 725 SF 6 32 90 25 16 1“ 1.1/4“ 54,0 10,3 168,9 38,5
PA 725 SF 6 90 25 16 1“ 1“ 47,6 9,5 136,9 33,6
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 725 SF 6 135 25 16 1“ 1“ 47,6 9,5 170,0 100,0
D
Material: Steel
Surface protection: electro galvanised,
yellow chromized
D
Surface protection: electro galvanised,
yellow chromized
Swage nipple PN HM
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: metric cylindrical outer thread
Seal type: flat seal
Standard code: AGM DN G1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
Swage nipple PN HL
Application: for HD 100 to HD 400, KP and S1
TE hoses
Series: light
Connection 1: metric cylindrical outer thread
Seal type: 24° inner cone DN G1
Standard: DIN 3861
Standard code: CEL
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
Swage nipple PN HS
Application: for HD 100 to HD 400, KP and S1
TE hoses
Series: heavy
Connection 1: metric cylindrical outer thread
Seal type: 24° inner cone DN G1
Standard: DIN 3861
Standard code: CES
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1
mm mm mm mm
PA 710 HL 10 6 3/8“ M 18 x 1,5 12 - -
PA 713 HL 12 8 1/2“ M 22 x 1,5 15 - -
PA 716 HL 16 10 5/8“ M 26 x 1,5 18 - -
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1
mm mm mm mm
PA 710 HS 08 10 6 3/8“ M 20 x 1,5 12 67,8 22
PA 710 HS 10 6 3/8“ M 22 x 1,5 14 69,7 22
PA 713 HS 12 8 1/2“ M 24 x 1,5 16 75,0 24
PA 713 HS 16 12 8 1/2“ M 30 x 2 20 - -
PA 716 HS 16 10 5/8“ M 30 x 2 20 90,5 30
PA 720 HS 16 19 12 3/4“ M 30 x 2 20 106,0 30
PA 720 HS 19 12 3/4“ M 36 x 2 25 104,0 36
PA 725 HS 25 16 1“ M 42 x 2 30 119,0 46
Swage nipple PN HF
Application: for HD 100 to HD 400, KP and S1
TE hoses
Series: french series
Connection 1: metric cylindrical outer thread
Seal type: 24° inner cone for french series DN G1
Standard code: AGF
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
Swage nipple PN H
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: metric cylindrical outer thread
Seal type: 60° inner cone
Standard code: AGM DN G1
Material: Steel
Surface protection: electro galvanised, yellow
chromized
L1
Swage nipple PN AM
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: metric nut thread
Seal type: flat seal
Standard code: DKL flat seal DN G1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1 OR
mm mm mm mm mm
PA 710 AOL 10 6 3/8“ M 18 x 1,5 12 - - -
PA 713 AOL 12 8 1/2“ M 22 x 1,5 15 - - -
PA 716 AOL 16 10 5/8“ M 26 x 1,5 18 - - 15,0 x 2,0
PA 716 AOL 20 16 10 5/8“ M 30 x 2 22 - - 20,0 x 2,0
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1 OR
mm mm mm mm mm
PA 710 AOS 08 10 6 3/8“ M 20 x 1,5 12 - 24 10,0 x 1,5
PA 710 AOS 10 6 3/8“ M 22 x 1,5 14 67,6 27 12,0 x 2,0
PA 713 AOS 12 8 1/2“ M 24 x 1,5 16 72,8 30 13,0 x 2,0
PA 713 AOS 16 12 8 1/2“ M 30 x 2 20 75,8 36 17,5 x 2,5
PA 716 AOS 13 16 10 5/8“ M 24 x 1,5 16 83,5 30 13,0 x 2,0
PA 716 AOS 16 10 5/8“ M 30 x 2 20 86,0 36 17,5 x 2,5
PA 716 AOS 20 16 10 5/8“ M 36 x 2 25 89,0 46 22,0 x 2,5
PA 720 AOS 16 19 12 3/4“ M 30 x 2 20 101,8 36 17,5 x 2,5
PA 720 AOS 25 19 12 3/4“ M 42 x 2 30 119,0 50 27,0 x 2,5
PA 725 AOS 20 25 16 1“ M 36 x 2 25 143,5 46 22,0 x 2,5
PA 725 AOS 25 16 1“ M 42 x 2 30 120,0 50 25,0 x 2,5
PA 725 AOS 32 25 16 1“ M 52 x 2 38 136,5 60 33,0 x 2,5
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 710 AOL 45 10 6 3/8“ M 18 x 1,5 12 - - - -
PA 713 AOL 45 12 8 1/2“ M 22 x 1,5 15 - - - -
PA 716 AOL 45 16 10 5/8“ M 26 x 1,5 18 - - 32 15,0 x 2,0
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 710 AOS 45 10 6 3/8“ M 22 x 1,5 14 94,2 - 27 12,0 x 2,0
PA 710 AOS 08 45 10 6 3/8“ M 20 x 1,5 12 - - 24 10,0 x 1,5
PA 713 AOS 45 12 8 1/2“ M 24 x 1,5 16 95,0 21,5 30 13,0 x 2,0
PA 713 AOS 16 45 12 8 1/2“ M 30 x 2 20 108,0 27,0 36 17,5 x 2,5
PA 716 AOS 45 16 10 3/8“ M 30 x 2 20 118,0 27,0 36 17,5 x 2,5
PA 720 AOS 16 45 19 12 3/4“ M 30 x 2 20 132,8 26,9 36 16,0 x 2,5
PA 720 AOS 25 45 19 12 3/4“ M 42 x 2 30 150,5 35,0 50 27,0 x 2,5
PA 725 AOS 20 45 25 16 1“ M 36 x 2 25 157,0 35,5 41 22,0 x 2,5
PA 725 AOS 45 25 16 1“ M 42 x 2 30 164,0 34,5 50 25,0 x 2,5
PA 725 AOS 32 45 25 16 1“ M 52 x 2 38 175,0 41,0 60 33,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 710 AOL 90 10 6 3/8“ M 18 x 1,5 12 - - - -
PA 713 AOL 90 12 8 1/2“ M 22 x 1,5 15 - - - -
PA 716 AOL 90 16 10 5/8“ M 26 x 1,5 18 - - - -
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 710 AOS 08 90 10 6 3/8“ M 20 x 1,5 12 - - 24 10,0 x 1,5
PA 710 AOS 90 10 6 3/8“ M 22 x 1,5 14 71,7 - 27 12,0 x 2,0
PA 713 AOS 90 12 8 1/2“ M 24 x 1,5 16 87,0 45,0 30 13,0 x 2,0
PA 713 AOS 16 90 12 8 1/2“ M 30 x 2 20 86,5 49,5 36 17,5 x 2,5
PA 716 AOS 90 16 10 3/8“ M 30 x 2 20 106,5 49,5 36 17,5 x 2,5
PA 720 AOS 16 90 19 12 3/4“ M 30 x 2 20 126,5 65,0 36 17,5 x 2,5
PA 720 AOS 90 19 12 3/4“ M 36 x 2 25 126,5 58,5 46 22,0 x 2,5
PA 720 AOS 90 SW41 19 12 3/4“ M 36 x 2 25 125,0 59,5 41 22,0 x 2,5
PA 720 AOS 25 90 19 12 3/4“ M 42 x 2 30 139,5 71,5 50 27,0 x 2,5
PA 725 AOS 20 90 25 12 1“ M 36 x 2 25 149,5 71,0 46 22,0 x 2,5
PA 725 AOS 90 25 16 1“ M 42 x 2 30 148,5 73,0 50 27,0 x 2,5
PA 725 AOS 32 90 25 16 1“ M 52 x 2 38 154,0 84,5 60 33,0 x 2,5
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Swage nipple PN AF
Application: for HD 100 to HD 400, KP and S1
TE hoses
Series: french series (imperial pipe)
Connection 1: metric nut thread
Seal type: 24° outer cone for french series DN G1
imperial pipe
Standard code: DKFM
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
1
G
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Swage nipple PN A
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: metric nut thread
Seal type: 60° outer cone
Standard: DIN 3863 DN G1
Standard code: DKM
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
1
G
Surface protection: electro galvanised,
yellow chromized
1
Surface protection: electro galvanised,
G
yellow chromized
Swage nipple PN HN
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: NPT outer thread (conical)
Seal type: thread seal, additional 60° inner
DN G1
cone
Standard: SAE J 476 A, SAE J 516
(ANSI B 1.20.3)
Standard code: AGN L1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
Swage nipple PN B
Application: for HD 100 to HD 400, KP and
TE hoses
DN
Connection 1: Banjo for metric hollow screw
Seal type: Sealed by copper ring
Standard: DIN 7642
Standard code: RNM D1
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
Swage nipple PN BR
Application: for HD 100 to HD 400, KP and
TE hoses
DN
Connection 1: Banjo for imperial hollow screw
Seal type: Sealed by copper ring
Standard: DIN 7642
Standard code: RNR D1
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
Swage nipple PN FL
Application: for HD 100 to HD 400, KP and
TE hoses DN D2
Series: light
Connection 1: Pipe socket
Seal type: Cutting ring connection L1
Standard: DIN 2353
Standard code: BEL
Material: Steel
Surface protection: electro galvanised,
yellow chromized
2
D
Surface protection: electro galvanised,
yellow chromized
Swage nipple PN FS
Application: for HD 100 to HD 400, KP and
TE hoses DN D2
Series: heavy
Connection 1: Pipe socket
Seal type: Cutting ring connection L1
Standard: DIN 2353
Standard code: BES
Material: Steel
Surface protection: electro galvanised,
yellow chromized
2
D
Surface protection: electro galvanised,
yellow chromized
Swage nipple PN FF
Application: for HD 100 to HD 400, KP and
TE hoses DN D2
Series: french series (imperial pipes)
Connection 1: Pipe socket
Seal type: Cutting ring connection (french L1
series)
Standard code: BEF
Material: Steel
Surface protection: electro galvanised,
yellow chromized
1
D
torsional stress
Swage nipple PN SO
Application: for HD 100 to HD 400, KP and OR
TE hoses
Connection 1: Plug connection
Seal type: O-ring sealed pin
Material: Steel
Surface protection: electro galvanised,
DN
yellow chromized
Item description: Self-aligning to prevent
torsional stress
L1
4
Designation DN Size Inch G1 L1 S1 OR
mm mm mm mm
PA 710 HJOF 10 6 3/8“ UN 11/16“ -16 - - 9,25 x 1,78
PA 710 HJOF 13 10 6 3/8“ UN 13/16“ -16 - - 12,42 x 1,78
PA 713 HJOF 12 8 1/2“ UN 13/16“ -16 - - 12,42 x 1,78
PA 716 HJOF 16 10 5/8“ UNS 1“ -14 - - 15,60 x 1,78
PA 720 HJOF 19 12 3/4“ UN 1.3/16“ -12 - - 18,77 x 1,78
PA 725 HJOF 25 16 1“ UN 1.7/16“ -12 - - 23,53 x 1,78
Swage nipple PN HJ
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: UN/UNF outer thread
Seal type: 74° outer cone
Standard: SAE J514 DN G1
Standard code: AGJ
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 710 HJ 10 6 3/8“ UNF 9/16“ -18 69,0 17
PA 710 HJ 13 10 6 3/8“ UNF 3/4“ -16 - -
PA 713 HJ 12 8 1/2“ UNF 3/4“ -16 77,2 22
PA 713 HJ 16 12 8 1/2“ UNF 7/8“ -14 80,4 24
PA 716 HJ 16 10 5/8“ UNF 7/8“ -14 92,0 24
1
yellow chromized
G
Note: Choose the appropriate mount based on the hose type.
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 06 AJF 45 6 4 1/4“ UNF 9/16“ -18 61,0 12,0 17
PN 06 AJF 10 45 6 4 1/4“ UN 11/16“ -16 62,0 13,0 22
PN 08 AJF 10 45 8 5 5/16“ UN 11/16“ -16 80,0 20,0 22
PN 10 AJF 45 10 6 3/8“ UN 11/16“ -16 68,5 15,5 22
PN 10 AJF 13 45 10 6 3/8“ UN 13/16“ -16 69,5 17,0 24
PN 13 AJF 45 12 8 1/2“ UN 13/16“ -16 78,0 17,0 24
PN 13 AJF 16 45 12 8 1/2“ UNS 1“ -14 80,5 19,5 30
PN 16 AJF 45 16 10 5/8“ UNS 1“ -14 92,0 24,0 30
PN 20 AJF 45 19 12 3/4“ UN 1.3/16“ -12 105,0 24,0 36
PN 25 AJF 45 25 16 1“ UN 1.7/16“ -12 130,0 28,5 41
PN 32 AJF 45 31 20 1.1/4“ UN 1.11/16“ -12 155,0 34,0 50
PN 40 AJF 45 38 24 1.1/2“ UN 2“ -12 177,0 36,0 60
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 710 AJF 10 6 3/8“ UN 11/16“ -16 61,5 22
PA 710 AJF 13 10 6 3/8“ UN 13/16“ -16 - -
PA 713 AJF 12 8 1/2“ UN 13/16“ -16 65,8 27
PA 716 AJF 16 10 5/8“ UNS 1“ -14 82,0 30
PA 716 AJF 20 16 10 5/8“ UN 1.3/16“ -12 82,0 36
PA 720 AJF 19 12 3/4“ UN 1.3/16“ -12 107,0 36
PA 720 AJF 25 19 12 3/4“ UN 1.7/16“ -12 108,4 41
PA 725 AJF 25 16 1“ UN 1.7/16“ -12 122,0 41
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 710 AJF 45 10 6 3/8“ UN 11/16“ -16 - - -
PA 710 AJF 13 45 10 6 3/8“ UN 13/16“ -16 - - -
PA 713 AJF 45 12 8 1/2“ UN 11/16“ -16 91,5 21,5 27
PA 716 AJF 45 16 10 5/8“ UNS 1“ -14 111,0 20,0 30
PA 720 AJF 45 19 12 3/4“ UN 1.3/16“ -12 133,0 26,5 36
PA 725 AJF 45 25 16 1“ UN 1.7/16“ -12 160,5 31,0 41
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 710 AJF 90 10 6 3/8“ UN 11/16“ -16 - - -
PA 710 AJF 13 90 10 6 3/8“ UN 13/16“ -16 - - -
PA 713 AJF 90 12 8 1/2“ UN 13/16“ -16 85,5 43,5 27
PA 716 AJF 90 16 10 5/8“ UNS 1“ -14 106,5 47,5 30
PA 720 AJF 90 19 12 3/4“ UN 1.3/16“ -12 126,0 56,0 36
PA 725 AJF 90 25 16 1“ UN 1.7/16“ -12 157,5 68,0 41
Swage nipple PN AJ
Application: for HD 100 to HD 400, KP and S1
TE hoses
Connection 1: UN/UNF nut thread
Seal type: 74° inner cone
Standard: SAE J514 DN G1
Standard code: DKJ
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
1
Surface protection: electro galvanised,
G
yellow chromized
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 710 AJ 10 6 3/8“ UNF 9/16“ -18 - -
PA 710 AJ 13 10 6 3/8“ UNF 3/4“ -16 62,3 24
PA 713 AJ 12 8 1/2“ UNF 3/4“ -16 67,4 24
PA 713 AJ 16 12 8 1/2“ UNF 7/8“ -14 66,5 25
PA 716 AJ 16 10 5/8“ UNF 7/8“ -14 79,0 25
PA 716 AJ 20 16 10 5/8“ UN 1.1/16“ -12 81,0 30
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 710 AJ 45 10 6 3/8“ UNF 9/16“ -18 - - -
PA 710 AJ 13 45 10 6 1/2“ UNF 3/4“ -16 - - -
PA 713 AJ 45 12 8 1/2“ UNF 3/4“ -16 92,8 21,5 24
PA 713 AJ 16 45 12 8 5/8“ UNF 7/8“ -14 92,8 20,0 25
PA 716 AJ 45 16 10 5/8“ UNF 7/8“ -14 116,5 25,0 25
PA 716 AJ 20 45 16 10 5/8“ UN 1.1/16“ -12 114,0 23,5 32
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 710 AJ 90 10 6 3/8“ UNF 9/16“ -18 - - -
PA 710 AJ 13 90 10 6 3/8“ UNF 3/4“ -16 - - -
PA 713 AJ 90 12 8 1/2“ UNF 3/4“ -16 87,0 43,5 24
PA 713 AJ 16 90 12 8 1/2“ UNF 7/8“ -14 87,0 40,0 25
PA 716 AJ 90 16 10 5/8“ UNF 7/8“ -14 109,0 51,0 25
PA 716 AJ 20 90 16 10 5/8“ UN 1.1/16“ -12 107,5 50,0 32
1
yellow chromized
G
Note: Choose the appropriate mount based on the hose type.
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 10 ASA 45 10 6 3/8“ UNF 5/8“ -18 - - -
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 720 HB 19 12 3/4“ G 3/4“ -14 97,5 32
PA 725 HB 25 16 1“ G 1“ -11 114,5 41
PA 532 HB A 31 20 1.1/4“ G 1.1/4“ -11 125,5 50
PA 540 HB A 38 24 1.1/2“ G 1.1/2“ -11 143,5 55
PA 550 HB A 51 32 2“ G 2“ -11 162,0 70
4
Designation DN Size Inch G1 L1 S1 OR
mm mm mm mm
PA 720 AOB 19 12 3/4“ G 3/4“ -14 96,5 32 17,1 x 1,60
PA 725 AOB 25 16 1“ G 1“ -11 113,0 41 22,1 x 1,60
PA 532 AOB A 31 20 1.1/4“ G 1.1/4“ -11 116,0 50 29,1 x 1,6
PA 540 AOB A 38 24 1.1/2“ G 1.1/2“ -11 133,5 55 35,1 x 1,6
PA 550 AOB A 51 32 2“ G 2“ -11 147,0 70 48,1 x 1,6
4
Designation DN Size Inch G1 L1 S1 OR
mm mm mm mm
PA 720 AOB H 19 12 3/4“ G 3/4“ -14 96,5 32 17,1 x 1,6
PA 725 AOB H 25 16 1“ G 1“ -11 103,0 41 22,1 x 1,6
PA 532 AOB AH 31 20 1.1/4“ G 1.1/4“ -11 114,0 50 29,1 x 1,6
4
Designation DN Size Inch G1 L1 L2 S1 ORv
mm mm mm mm mm
PA 720 AOB 45 19 12 3/4“ G 3/4“ -14 140,0 34,5 32 17,1 x 1,6
PA 725 AOB 45 25 16 1“ G 1“ -11 169,5 39,0 41 22,1 x 1,6
PA 532 AOB 45 A 31 20 1.1/4“ G 1.1/4“ -11 201,0 51,5 50 29,1 x 1,6
PA 540 AOB 45 A 38 24 1.1/2“ G 1.1/2“ -11 235,0 60,0 60 35,1 x 1,6
PA 550 AOB 45 A 51 32 2“ G 2“ -11 279,0 68,5 70 48,1 x 1,6
4
Designation DN Size Inch G1 L1 L2 S1 ORr
mm mm mm mm mm
PA 720 AOB 90 19 12 3/4“ G 3/4“ -14 127,5 68,2 32 17,1 x 1,6
PA 725 AOB 90 25 16 1“ G 1“ -11 158,0 81,7 41 22,1 x 1,6
PA 532 AOB 90 A 31 20 1.1/4“ G 1.1/4“ -11 182,0 106,5 50 29,1 x 1,6
PA 540 AOB 90 A 38 24 1.1/2“ G 1.1/2“ -11 215,5 123,5 60 35,1 x 1,6
PA 550 AOB 90 A 51 32 2“ G 2“ -11 250,5 146,0 70 48,1 x 1,6
4
Designation DN Size Inch Flange size D H L1
mm mm mm mm
PA 720 SF 19 12 3/4“ 3/4“ 38,1 6,7 116,5
PA 720 SF 25 19 12 3/4“ 1“ 44,5 8,0 119,5
PA 725 SF 20 25 16 1“ 3/4“ 38,1 6,7 132,0
PA 725 SF 25 16 1“ 1“ 44,5 8,0 135,5
PA 725 SF 32 25 16 1“ 1.1/4“ 50,8 8,0 138,5
PA 532 SF A 31 20 1.1/4“ 1.1/4“ 50,8 8,0 148,5
PA 532 SF 25 A 31 20 1.1/4“ 1“ 44,5 8,0 145,0
PA 532 SF 40 A 31 20 1.1/4“ 1.1/2“ 60,3 8,0 151,5
PA 540 SF A 38 24 1.1/2“ 1.1/2“ 60,3 8,0 166,5
PA 540 SF 32 A 38 24 1.1/2“ 1.1/4“ 50,8 8,0 158,0
PA 540 SF 50 A 38 24 1.1/2“ 2“ 71,4 9,5 169,5
PA 550 SF A 51 32 2“ 2“ 71,4 9,5 183,5
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 720 SF 45 19 12 3/4“ 3/4“ 38,1 6,7 132,5 27,4
PA 720 SF 25 45 19 12 3/4“ 1“ 44,5 8,0 134,6 29,5
PA 725 SF 45 25 16 1“ 1“ 44,5 8,0 159,0 28,6
PA 725 SF 20 45 25 16 1“ 3/4“ 38,1 6,7 146,5 31,0
PA 725 SF 32 45 25 16 1“ 1.1/4“ 50,8 8,0 160,7 30,4
PA 532 SF 45 A 31 20 1.1/4“ 1.1/4“ 50,8 8,0 182,0 34,5
PA 532 SF 25 45 A 31 20 1.1/4“ 1“ 44,5 8,0 170,5 35,0
PA 532 SF 40 45 A 31 20 1.1/4“ 1.1/2“ 60,3 8,0 187,0 37,5
PA 540 SF 45 A 38 24 1.1/2“ 1.1/2“ 60,3 8,0 215,0 41,5
PA 540 SF 32 45 A 38 24 1.1/2“ 1.1/4“ 50,8 8,0 202,5 43,0
PA 540 SF 50 45 A 38 24 1.1/2“ 2“ 71,4 9,5 230,5 55,5
PA 550 SF 45 A 51 32 2“ 2“ 71,4 9,5 263,0 58,5
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 720 SF 90 19 12 3/4“ 3/4“ 38,1 6,7 127,5 58,0
PA 720 SF 25 90 19 12 3/4“ 1“ 44,5 8,0 127,5 61,0
PA 725 SF 90 25 16 1“ 1“ 44,5 8,0 158,0 67,0
PA 725 SF 20 90 25 16 1“ 3/4“ 38,1 6,7 143,5 65,5
PA 725 SF 32 90 25 16 1“ 1.1/4“ 50,8 8,0 158,0 69,5
PA 532 SF 90 A 31 20 1.1/4“ 1.1/4“ 50,8 8,0 181,0 79,5
PA 532 SF 25 90 A 31 20 1.1/4“ 1“ 44,5 8,0 162,0 76,0
PA 532 SF 40 90 A 31 20 1.1/4“ 1.1/2“ 60,3 8,0 182,0 86,7
PA 540 SF 90 A 38 24 1.1/2“ 1.1/2“ 60,3 8,0 211,0 99,0
PA 540 SF 32 90 A 38 24 1.1/2“ 1.1/4“ 50,8 8,0 193,0 94,0
PA 540 SF 50 90 A 38 24 1.1/2“ 2“ 71,4 9,5 218,0 100,0
PA 550 SF 90 A 51 32 2“ 2“ 71,4 9,5 250,0 112,5
4
Designation DN Size Inch Flange size D H L1
mm mm mm mm
PA 720 SF 6 19 12 3/4“ 3/4“ 41,3 8,8 124,5
PA 720 SF 6 25 19 12 3/4“ 1“ 47,6 9,5 129,0
PA 725 SF 6 20 25 16 1“ 3/4“ 41,3 8,8 134,0
PA 725 SF 6 25 16 1“ 1“ 47,6 9,5 146,5
PA 725 SF 6 32 25 16 1“ 1.1/4“ 54,0 10,3 151,0
PA 532 SF 6 A 31 20 1.1/4“ 1.1/4“ 54,0 10,3 162,5
PA 532 SF 6 25 A 31 20 1.1/4“ 1“ 47,6 9,5 -
PA 532 SF 6 40 A 31 20 1.1/4“ 1.1/2“ 63,5 12,6 167,0
PA 540 SF 6 A 38 24 1.1/2“ 1.1/2“ 63,5 12,6 183,5
PA 540 SF 6 32 A 38 24 1.1/2“ 1.1/4“ 54,0 10,3 -
PA 540 SF 6 50 A 38 24 1.1/2“ 2“ 79,4 12,6 188,0
PA 550 SF 6 A 51 32 2“ 2“ 79,4 12,6 202,0
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 720 SF 6 45 19 12 3/4“ 3/4“ 41,3 8,8 135,3 30,2
PA 720 SF 6 25 45 19 12 3/4“ 1“ 47,6 9,5 139,6 34,4
PA 725 SF 6 45 25 16 1“ 1“ 47,6 9,5 136,9 33,6
PA 725 SF 6 32 45 25 16 1“ 1.1/4“ 54,0 10,3 168,9 38,5
PA 532 SF 6 25 45 A 31 20 1.1/4“ 1“ 47,6 9,5 - -
PA 532 SF 6 45 A 31 20 1.1/4“ 1.1/4“ 54,0 10,3 191,0 41,5
PA 532 SF 6 40 45 A 31 20 1.1/4“ 1.1/2“ 63,5 12,6 197,0 47,5
PA 540 SF 6 45 A 38 24 1.1/2“ 1.1/2“ 63,5 12,6 222,5 49,0
PA 540 SF 6 32 45 A 38 24 1.1/2“ 1.1/4“ 54,0 10,3 - -
PA 540 SF 6 50 45 A 38 24 1.1/2“ 2“ 79,4 12,6 236,0 61,0
PA 550 SF 6 45 A 51 32 2“ 2“ 79,4 12,6 275,0 64,5
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 725 SF 6 60 25 16 1“ 1“ 47,6 9,5 - -
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 720 SF 6 90 19 12 3/4“ 3/4“ 41,3 8,8 127,5 62,0
PA 720 SF 6 25 90 19 12 3/4“ 1“ 47,6 9,5 127,5 68,0
PA 725 SF 6 20 90 25 16 1“ 3/4“ 41,3 8,8 143,5 67,5
PA 725 SF 6 90 25 16 1“ 1“ 47,6 9,5 136,9 33,6
PA 532 SF 6 25 90 A 31 20 1.1/4“ 1“ 47,6 9,5 162,0 80,0
PA 532 SF 6 40 90 A 31 20 1.1/4“ 1.1/2“ 63,5 12,6 182,0 101,2
PA 532 SF 6 90 A 31 20 1.1/4“ 1.1/4“ 54,0 10,3 182,0 92,7
PA 540 SF 6 90 A 38 24 1.1/2“ 1.1/2“ 63,5 12,6 215,5 110,0
PA 540 SF 6 32 90 A 38 24 1.1/2“ 1.1/4“ 54,0 10,3 193,0 100,0
PA 540 SF 6 50 90 A 38 24 1.1/2“ 2“ 79,4 12,6 215,5 126,0
PA 550 SF 6 90 A 51 32 2“ 2“ 79,4 12,6 250,5 141,0
4
Designation DN Size Inch Flange size L1 L2
mm mm mm
PA 720 SF 6 90 4 K 19 12 3/4“ - - -
PA 725 SF 6 90 4 K 25 16 1“ - - -
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 725 SF 6 135 25 16 1“ 1“ 47,6 9,5 170,0 100,0
4
Designation DN Size Inch Flange size D H L1
mm mm mm mm
PA 720 SF 9 19 12 3/4“ 3/4“ 41,3 14,3 130,0
PA 720 SF 9 25 19 12 3/4“ 1“ 47,6 14,3 155,0
PA 725 SF 9 20 25 16 1“ 3/4“ 41,3 14,3 137,0
PA 725 SF 9 25 16 1“ 1“ 47,6 14,3 150,0
PA 725 SF 9 32 25 16 1“ 1.1/4“ 54,0 14,3 155,0
PA 532 SF 9 A 31 20 1.1/4“ 1.1/4“ 54,0 14,3 166,5
PA 532 SF 9 25 A 31 20 1.1/4“ 1“ 47,6 14,3 150,0
PA 532 SF 9 40 A 31 20 1.1/4“ 1.1/4“ 63,5 14,3 168,5
PA 540 SF 9 A 38 24 1.1/2“ 1.1/2“ 63,5 14,3 185,0
PA 540 SF 9 32 A 38 24 1.1/2“ 1.1/4“ 54,0 14,3 163,0
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 525 SF 9 20 45 A 25 16 1“ 3/4“ 41,3 14,3 - -
PA 532 SF 9 45 A 31 20 1.1/4“ 1.1/4“ 54,0 14,3 194,0 44,5
PA 532 SF 9 25 45 A 31 20 1.1/4“ 1“ 47,6 14,3 174,0 39,5
PA 532 SF 9 40 45 A 31 20 1.1/4“ 1.1/2“ 63,5 14,3 198,0 48,5
PA 540 SF 9 45 A 38 24 1.1/2“ 1.1/2“ 63,5 14,3 226,0 51,0
PA 540 SF 9 32 45 A 38 24 1.1/2“ 1.1/4“ 54,0 14,3 205,5 47,0
4
Designation DN Size Inch Flange size D H L1 L2
mm mm mm mm mm
PA 720 SF 9 90 19 12 3/4“ 3/4“ 41,3 14,0 127,5 67,5
PA 720 SF 9 25 90 19 12 3/4“ 1“ 47,6 14,0 127,5 72,5
PA 725 SF 9 20 90 25 16 1“ 3/4“ 41,3 14,0 142,5 71,5
PA 725 SF 9 90 25 16 1“ 1“ 47,6 14,0 158,0 78,5
PA 725 SF 9 32 90 25 16 1“ 1.1/4“ 54,0 14,0 158,0 85,0
PA 532 SF 9 25 90 A 31 20 1.1/4“ 1“ 47,6 14,3 161,0 82,0
PA 532 SF 9 40 90 A 31 20 1.1/4“ 1.1/2“ 63,5 14,3 182,0 103,0
PA 532 SF 9 90 A 31 20 1.1/4“ 1.1/4“ 54,0 14,3 182,0 97,0
PA 540 SF 9 90 A 38 24 1.1/2“ 1.1/2“ 63,5 14,3 215,5 112,0
PA 540 SF 9 32 90 A 38 24 1.1/2“ 1.1/4“ 54,0 14,3 192,0 100,0
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1
mm mm mm mm
PA 720 HS 16 19 12 3/4“ M 30 x 2 20 106,0 30
PA 720 HS 19 12 3/4“ M 36 x 2 25 104,0 36
PA 725 HS 25 16 1“ M 42 x 2 30 119,0 46
PA 532 HS A 31 20 1.1/4“ M 52 x 2 38 126,0 55
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1 OR
mm mm mm mm mm
PA 540 AOL A 38 24 1.1/2“ M 52 x 2 42 - - -
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 520 AOL 45 VA 19 12 3/4“ M 30 x 2 22 - - 36 20,0 x 2,0
PA 525 AOL 45 VA 25 16 1“ M 36 x 2 28 - 50,0 41 25,0 x 2,0
PA 532 AOL 45 VA 31 20 1.1/4“ M 45 x 2 35 - 50,0 50 30,0 x 2,5
PA 540 AOL 45 VA 38 24 1.1/2“ M 52 x 2 42 - 61,0 60 38,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 520 AOL 90 VA 19 12 3/4“ M 30 x 2 22 - - 36 20,0 x 2,0
PA 525 AOL 90 VA 25 16 1“ M 36 x 2 28 - 92,0 41 25,0 x 2,0
PA 532 AOL 90 VA 31 20 1.1/4“ M 45 x 2 35 - 98,0 50 30,0 x 2,5
PA 540 AOL 90 VA 38 24 1.1/2“ M 52 x 2 42 - 117,0 60 38,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1 OR
mm mm mm mm mm
PA 720 AOS 16 19 12 3/4“ M 30 x 2 20 101,8 36 17,5 x 2,5
PA 720 AOS 19 12 3/4“ M 36 x 2 25 105,5 46 20,0 x 2,5
PA 720 AOS 25 19 12 3/4“ M 42 x 2 30 119,0 50 27,0 x 2,5
PA 725 AOS 25 16 1“ M 42 x 2 30 120,0 50 25,0 x 2,5
PA 725 AOS 20 25 16 1“ M 36 x 2 25 143,5 46 22,0 x 2,5
PA 725 AOS 32 25 16 1“ M 52 x 2 38 136,5 60 33,0 x 2,5
PA 532 AOS 25 A 31 20 1.1/4“ M 42 x 2 30 151,0 50 27,0 x 2,5
PA 532 AOS A 31 20 1.1/4“ M 52 x 2 38 134,5 60 33,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1 OR
mm mm mm mm mm
PA 720 AOS H 19 12 3/4“ M 36 x 2 25 104 46 20,0 x 2,5
PA 725 AOS H 25 16 1“ M 42 x 2 30 111 50 25,0 x 2,5
PA 532 AOS A H 31 20 1.1/4“ M 52 x 2 38 112,5 60 33,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 720 AOS 16 45 19 12 3/4“ M 30 x 2 20 132,8 26,9 36 16,0 x 2,5
PA 720 AOS 25 45 19 12 3/4“ M 42 x 2 30 150,5 35,0 50 27,0 x 2,5
PA 720 AOS 45 19 12 3/4“ M 36 x 2 25 136,0 30,2 46 20,0 x 2,5
PA 725 AOS 45 25 16 1“ M 42 x 2 30 164,0 34,5 50 25,0 x 2,5
PA 725 AOS 20 45 25 16 1“ M 36 x 2 25 157,0 35,5 41 22,0 x 2,5
PA 725 AOS 32 45 25 16 1“ M 52 x 2 38 175,0 41,0 60 33,0 x 2,5
PA 532 AOS 45 A 31 20 1.1/4“ M 52 x 2 38 192,5 41,2 60 33,0 x 2,5
PA 532 AOS 25 45 A 31 20 1“ M 42 x 2 30 175,0 39,5 50 27,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 720 AOS 16 90 19 12 3/4“ M 30 x 2 20 126,5 65,0 36 17,5 x 2,5
PA 720 AOS 90 19 12 3/4“ M 36 x 2 25 126,5 58,5 46 22,0 x 2,5
PA 720 AOS 25 90 19 12 3/4“ M 42 x 2 30 139,5 71,5 50 27,0 x 2,5
PA 725 AOS 20 90 25 12 1“ M 36 x 2 25 149,5 71,0 46 22,0 x 2,5
PA 725 AOS 90 25 16 1“ M 42 x 2 30 148,5 73,0 50 27,0 x 2,5
PA 725 AOS 32 90 25 16 1“ M 52 x 2 38 154,0 84,5 60 33,0 x 2,5
PA 532 AOS 90 A 31 20 1.1/4“ M 52 x 2 38 182,0 91,0 60 33,0 x 2,5
PA 532 AOS 25 90 A 31 20 1.1/4“ M 42 x 2 30 162,0 82,0 50 27,0 x 2,5
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 720 HN 19 12 3/4“ NPT 3/4“ -14 98,0 27
PA 725 HN 25 16 1“ NPT 1“ -11,5 116,0 36
PA 725 HN 32 25 16 1“ NPT 1.1/4“ -11,5 118,0 46
PA 532 HN A 31 20 1.1/4“ NPT 1.1/4“ -11,5 124,5 46
PA 540 HN A 38 24 1.1/2“ NPT 1.1/2“ -11,5 139,5 50
PA 550 HN A 51 32 2“ NPT 2“ -11,5 157,0 65
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 720 HJ 19 12 3/4“ UN 1.1/16“ -12 102,5 27
PA 725 HJ 25 16 1“ UN 1.5/16“ -12 117,0 36
PA 532 HJ A 31 20 1.1/4“ UN 1.5/8“ -12 127,0 46
PA 532 HJ 40 A 31 20 1.1/4“ UN 1.7/8“ -12 - -
PA 540 HJ A 38 24 1.1/2“ UN 1.7/8“ -12 145,5 50
PA 540 HJ 50 A 38 24 1.1/2“ UN 2.1/2“ -12 - -
PA 550 HJ A 51 32 2“ UN 2.1/2“ -12 169,5 65
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 720 AJF 19 12 3/4“ UN 1.3/16“ -12 107,0 36
PA 720 AJF 25 19 12 3/4“ UN 1.7/16“ -12 108,4 41
PA 725 AJF 25 16 1“ UN 1.7/16“ -12 122,0 41
PA 532 AJF A 31 20 1.1/4“ UN 1.11/16“ -12 129,0 50
PA 540 AJF A 38 24 1.1/2“ UN 2“ -12 141,0 60
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 720 AJF 45 19 12 3/4“ UN 1.3/16“ -12 133,0 26,5 36
PA 725 AJF 45 25 16 1“ UN 1.7/16“ -12 160,5 31,0 41
PA 532 AJF 45 A 31 20 1.1/4“ UN 1.11/16“ -12 171,5 76,0 50
PA 540 AJF 45 A 38 24 1.1/2“ UN 2“ -12 207,0 88,5 60
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 720 AJF 90 19 12 3/4“ UN 1.3/16“ -12 126,0 56,0 36
PA 725 AJF 90 25 16 1“ UN 1.7/16“ -12 157,5 68,0 41
PA 532 AJF 90 A 31 20 1.1/4“ UN 1.11/16“ -12 178,0 34,0 50
PA 540 AJF 90 A 38 24 1.1/2“ UN 2“ -12 209,0 32,0 60
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 720 AJ H 19 12 3/4“ UN 1.1/16“ -12 91,5 32
PA 725 AJ H 25 16 1“ UN 1.5/16“ -12 98,2 41
PA 525 AJ 32 A H 25 16 1.1/4“ UN 1.5/8“ -12 111 50
PA 532 AJ AH 31 20 1.1/4“ UN 1.5/8“ -12 112 50
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 520 AJ VA 19 12 3/4“ UN 1.1/16“ -12 - 32
PA 520 AJ 25 VA 19 12 3/4“ UN 1.5/16“ -12 - 41
PA 525 AJ VA 25 16 1“ UN 1.5/16“ -12 - 41
PA 525 AJ 32 VA 25 16 1“ UN 1.5/8“ -12 - 50
PA 532 AJ VA 31 20 1.1/4“ UN 1.5/8“ -12 - 50
PA 532 AJ 40 VA 31 20 1.1/4“ UN 1.7/8“ -12 - 60
PA 540 AJ VA 38 24 1.1/2“ UN 1.7/8“ -12 - 60
PA 540 AJ 50 VA 38 24 1.1/2“ UN 2.1/2“ -12 - -
PA 550 AJ VA 51 32 2“ UN 2.1/2“ -12 - 70
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 520 AJ 45 VA 19 12 3/4“ UN 1.1/16“ -12 - 37,5 32
PA 520 AJ 25 45 VA 19 12 3/4“ UN 1.5/16“ -12 - 43,5 41
PA 525 AJ 45 VA 25 1“ UN 1.5/16“ -12 - 47,0 41
PA 525 AJ 32 45 VA 25 16 1“ UN 1.5/8“ -12 - 51,0 50
PA 532 AJ 45 VA 31 20 1.1/4“ UN 1.5/8“ -12 - 49,0 50
PA 532 AJ 40 45 VA 31 20 1.1/4“ UN 1.7/8“ -12 - 52,0 60
PA 540 AJ 45 VA 38 24 1.1/2“ UN 1.7/8“ -12 - 50,0 60
PA 540 AJ 50 45 VA 38 24 1.1/2“ UN 2.1/2“ -12 - - -
PA 550 AJ 45 VA 51 32 2“ UN 2.1/2“ -12 - 78,0 70
G1 S1
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 520 AJ 90 VA 19 12 3/4“ UN 1.1/16“ -12 - 72,0 32
PA 520 AJ 25 90 VA 19 12 3/4“ UN 1.5/16“ -12 - 79,0 41
PA 525 AJ 90 VA 25 16 1“ UN 1.5/16“ -12 - 86,0 41
PA 525 AJ 32 90 VA 25 16 1“ UN 1.5/8“ -12 - 93,0 50
PA 532 AJ 90 VA 31 20 1.1/4“ UN 1.5/8“ -12 - 96,0 50
PA 532 AJ 40 90 VA 31 20 1.1/4“ UN 1.7/8“ -12 - 98,0 60
PA 540 AJ 90 VA 38 24 1.1/2“ UN 1.7/8“ -12 - 107,0 60
PA 540 AJ 50 90 VA 38 24 1.1/2“ UN 2.1/2“ -12 - - -
PA 550 AJ 90 VA 51 32 2“ UN 2.1/2“ -12 - 151,5 70
4
Designation DN Size Inch G1 L1 S1 OR
mm mm mm mm
PA 720 AOJ 19 12 3/4“ UN 1.1/16“ -12 104,0 32 19,00 x 1,50
PA 725 AOJ 25 16 1“ UN 1.5/16“ -12 119,0 41 25,00 x 1,50
PA 532 AOJ A 31 20 1.1/4“ UN 1.5/8“ -12 129,0 50 31,47 x 1,78
PA 540 AOJ A 38 24 1.1/2“ UN 1.7/8“ -12 152,0 55 37,82 x 1,78
PA 550 AOJ A 51 32 2“ UN 2.1/2“ -12 170,0 75 50,00 x 2,00
4
Designation DN Size Inch G1 L1 L2 S1 OR
mm mm mm mm mm
PA 720 AOJ 45 19 12 3/4“ UN 1.1/16“ -12 140,0 34,5 32 19,00 x 1,50
PA 725 AOJ 45 25 16 1“ UN 1.5/16“ -12 169,5 39,0 41 25,00 x 1,50
PA 532 AOJ 45 A 31 20 1.1/4“ UN 1.5/8“ -12 199,0 49,5 50 31,47 x 1,78
PA 540 AOJ 45 A 38 24 1.1/2“ UN 1.7/8“ -12 233,0 58,0 55 37,82 x 1,78
PA 550 AOJ 45 A 51 32 2“ UN 2.1/2“ -12 275,0 64,0 75 50,00 x 2,00
4
Designation DN Size Inch G1 L1 L2 S1 OR
mm mm mm mm mm
PA 720 AOJ 90 19 12 3/4“ UN 1.1/16“ -12 127,5 68,2 32 19,00 x 1,50
PA 725 AOJ 90 25 16 1“ UN 1.5/16“ -12 158,0 81,7 41 25,00 x 1,50
PA 532 AOJ 90 A 31 20 1.1/4“ UN 1.5/8“ -12 182,0 104,0 50 31,47 x 1,78
PA 540 AOJ 90 A 38 24 1.1/2“ UN 1.7/8“ -12 215,5 120,5 55 37,82 x 1,78
PA 550 AOJ 90 A 51 32 2“ UN 2.1/2“ -12 250,5 140,0 75 50,00 x 2,00
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
PA 710 AOS 08 90 10 6 3/8“ M 20 x 1,5 12 - - 24 10,0 x 1,5
PA 710 AOS 90 10 6 3/8“ M 22 x 1,5 14 71,7 - 27 12,0 x 2,0
PA 713 AOS 90 12 8 1/2“ M 24 x 1,5 16 87,0 45,0 30 13,0 x 2,0
PA 713 AOS 16 90 12 8 1/2“ M 30 x 2 20 86,5 49,5 36 17,5 x 2,5
PA 716 AOS 90 16 10 3/8“ M 30 x 2 20 106,5 49,5 36 17,5 x 2,5
PA 720 AOS 90 19 12 3/4“ M 36 x 2 25 126,5 58,5 46 22,0 x 2,5
PA 720 AOS 16 90 19 12 3/4“ M 30 x 2 20 126,5 65,0 36 17,5 x 2,5
PA 720 AOS 25 90 19 12 3/4“ M 42 x 2 30 139,5 71,5 50 27,0 x 2,5
PA 725 AOS 90 25 16 1“ M 42 x 2 30 148,5 73,0 50 27,0 x 2,5
PA 725 AOS 20 90 25 12 1“ M 36 x 2 25 149,5 71,0 46 22,0 x 2,5
PA 725 AOS 32 90 25 16 1“ M 52 x 2 38 154,0 84,5 60 33,0 x 2,5
PA 732 AOS 25 90 S 31 20 1.1/4“ M 42 x 2 30 162,0 82,0 50 27,0 x 2,5
PA 732 AOS 90 S 31 20 1.1/4“ M 52 x 2 38 235,0 95,0 60 33,0 x 2,5
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1 OR
mm mm mm mm mm
PA 720 AOS H 19 12 3/4“ M 36 x 2 25 104,0 46 20,0 x 2,5
PA 725 AOS H 25 16 1“ M 42 x 2 30 111,0 50 25,0 x 2,5
PA 732 AOS SH 31 20 1.1/4“ M 52 x 2 38 114,0 60 33,0 x 2,5
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PA 713 AJF 90 12 8 1/2“ UN 13/16“ -16 85,5 43,5 27
PA 716 AJF 90 16 10 5/8“ UNS 1“ -14 106,5 47,5 30
PA 720 AJF 90 19 12 3/4“ UN 1.3/16“ -12 126,0 56,0 36
PA 725 AJF 90 25 16 1“ UN 1.7/16“ -12 157,5 68,0 41
PA 732 AJF 90 31 20 1.1/4“ UN 1.11/16“ -12 171,5 76,0 50
PA 740 AJF 90 38 24 1.1/2“ UN 2“ -12 207,0 88,5 60
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PA 650 HB 51 32 2“ G 2“ -11 143,5 55
G1 S1
4
Designation DN Size Inch G1 L1 L2 S1 OR
mm mm mm mm mm
PA 650 AOJ 90 51 32 2“ UN 2.1/2“ -12 250,5 140,0 75 50,00 x 2,00
L1
L1
L1
L1
1
G
Note: Undamaged nipples can be reused.
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
ND 06 AB 45 6 4 1/4“ G 1/4“ -19 51,0 16,0 17
ND 10 AB 45 10 6 3/8“ G 3/8“ -19 58,0 18,0 19
ND 13 AB 45 13 8 1/2“ G 1/2“ -14 68,0 19,0 27
ND 16 AB 45 16 10 5/8“ G 5/8“ -14 81,0 21,0 30
ND 20 AB 45 19 12 3/4“ G 3/4“ -14 92,0 27,0 32
G1 S1
L1
1
yellow chromized
G
Note: Undamaged nipples can be reused.
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1
mm mm mm mm mm
ND 06 AFL 04 45 6 4 1/4“ M 12 x 1,5 6 51,0 16,0 14
ND 06 AFL 45 6 4 1/4“ M 14 x 1,5 8 51,0 16,0 17
ND 10 AFL 08 45 10 6 3/8“ M 16 x 1,5 10 58,0 18,0 19
ND 10 AFL 45 10 6 3/8“ M 18 x 1,5 12 59,0 18,0 22
ND 13 AFL 45 12 8 1/2“ M 22 x 1,5 15 68,0 19,0 27
ND 16 AFL 45 16 10 5/8“ M 26 x 1,5 18 81,0 21,0 32
ND 20 AFL 45 19 12 3/4“ M 30 x 2 22 88,0 23,0 36
ND 25 AFL 45 25 16 1“ M 36 x 2 28 105,0 30,0 41
G1 S1
1
yellow chromized
G
Note: Undamaged nipples can be reused.
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1
mm mm mm mm mm
ND 06 AFL K 45 6 4 1/4“ M 16 x 1,5 8 43,0 15,0 19
ND 10 AFL K 08 45 10 6 3/8“ M 16 x 1,5 10 48,0 16,0 19
ND 13 AFL K 45 12 8 1/2“ M 22 x 1,5 15 54,0 18,0 27
1
yellow chromized OR
G
Note: Undamaged nipples can be reused.
4
for external
Designation DN Size Inch G1 pipe Ø L1 L2 S1 OR
mm mm mm mm mm mm
ND 10 AOL 08 45 10 6 3/8“ M 16 x 1,5 10 59,0 19,0 19 8,5 x 1,5
ND 10 AOL 45 10 6 3/8“ M 18 x 1,5 12 60,0 19,0 22 10,5 x 1,5
ND 13 AOL 45 12 8 1/2“ M 22 x 1,5 15 69,0 21,0 27 12,5 x 1,5
G1 S1
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
ND 20 A 19 12 3/4“ M 30 x 1,5 - -
ND 06 FS 6 4 1/4“ S 10 -
ND 10 FS 10 6 3/8“ S 14 -
ND 16 FS 16 10 5/8“ S 20 -
L1
4
Designation DN Size Inch L1
mm mm
ND 06 VB 6 4 1/4“ 45,0
ND 10 VB 10 6 3/8“ 54,0
ND 13 VB 12 8 1/2“ 64,0
ND 16 VB 16 10 5/8“ 84,0
ND 20 VB 19 12 3/4“ 84,0
L1
L1
1
G
Note: Undamaged nipples can be reused.
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
ND 10 AJF 45 10 6 3/8“ UN 11/16“ -16 55,0 11,0 21
G1 S1
L1
G1 S1
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PAY 306 HB 6 4 1/4“ G 1/4“ -19 64,0 17
PAY 308 HB 10 8 5 5/16“ G 3/8“ -19 64,0 22
PAY 310 HB 10 6 3/8“ G 3/8“ -19 71,0 22
PAY 310 HB 13 10 6 3/8“ G 1/2“ -14 76,0 22
PAY 313 HB 12 8 1/2“ G 1/2“ -14 79,0 24
PAY 316 HB 20 16 10 5/8“ G 3/4“ -14 92,0 32
PAY 320 HB 19 12 3/4“ G 3/4“ -14 92,0 32
PAY 320 HB 25 19 12 3/4“ G 1“ -11 100,0 36
PAY 325 HB 25 16 1“ G 1“ -11 100,0 36
PAY 325 HB 32 25 16 1“ G 1.1/4“ -11 103,0 50
PAY 332 HB 40 31 20 1.1/4“ G 1.1/2“ -11 118,0 55
L1
L1
L1
L1
G1 S1
Note: Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate mount based on the hose type.
4 Do not use for new designs; we recommend: SIN...AFL.
2
D
Note: Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate mount based on the hose type.
4
Designation DN Size Inch Ø d2 for hose ID L1 L2
mm mm mm mm mm
SIN 04 FL 45 4 3 3/16“ 6 6 - -
SIN 06 FL 45 6 4 1/4“ 8 8 - -
SIN 08 FL 45 8 5 5/16“ 10 10 79,0 25,0
SIN 10 FL 45 10 6 3/8“ 12 12 88,0 32,0
SIN 13 FL 45 12 8 1/2“ 15 15 - -
D2
Note: Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate mount based on the hose type.
4 Do not use for new designs; we recommend: SIN...AFL...90.
4
Designation DN Size Inch D1 for hose ID
mm mm mm
SIN 03 B 02 3 2,5 1/8“ 8 5
SIN 04 B 02 4 3 3/16“ 8 6
SIN 04 B 4 3 3/16“ 10 6
SIN 04 B 06 4 3 3/16“ 12 6
SIN 04 B 08 4 3 3/16“ 14 6
SIN 06 B 04 6 4 1/4“ 10 8
SIN 06 B 6 4 1/4“ 12 8
SIN 06 B 08 6 4 1/4“ 14 8
SIN 08 B 06 8 5 5/16“ 12 10
SIN 08 B 8 5 5/16“ 14 10
SIN 08 B 10 8 5 5/16“ 16 10
SIN 08 B 13 8 5 5/16“ 18 10
SIN 10 B 10 6 3/8“ 16 12
SIN 10 B 13 10 6 3/8“ 18 12
SIN 13 B 12 8 1/2“ 18 15
SIN 13 B 16 12 8 1/2“ 22 15
SIN 13 B 20 12 8 1/2“ 26 15
SIN 16 B 16 10 5/8“ 22 18
SIN 16 B 20 16 10 5/8“ 26 18
4
Designation DN Size Inch D1 for hose ID
mm mm mm
SIN 03 BD 02 3 2,5 1/8“ 8 5
SIN 04 BD 4 3 3/16“ 10 6
SIN 06 BD 6 4 1/4“ 12 8
SIN 08 BD 8 5 5/16“ 14 10
D1
4
Designation DN Size Inch D1 for hose ID L1 L2
mm mm mm mm mm
SIN 03 B 02 90 3 2,5 1/4“ 8 5 - -
SIN 04 B 90 4 3 3/16“ 10 6 49,0 42,0
SIN 06 B 90 6 4 1/4“ 12 8 49,0 45,0
SIN 08 B 90 8 5 5/16“ 10 10 58,0 54,0
4
Designation DN Size Inch D1 for hose ID
mm mm mm
SIN 04 BR 06 4 3 3/16“ 13,5 6
SIN 06 BR 10 6 4 1/4“ 16,8 8
4
Designation DN Size Inch for hose ID
mm mm
SIN 03 T VB 3 2,5 1/8“ 5
SIN 04 T VB 4 3 3/16“ 6
SIN 06 T VB 6 4 1/4“ 8
SIN 08 T VB 8 5 5/16“ 10
SIN 10 T VB 10 6 3/8“ 12
L1
4
Designation DN Size Inch for hose ID L1 for metric union nut for BSP union nut
mm mm mm
SIN 03 DK 3 2,5 1/8“ 5 - SUEM02L SUEM03R04
SIN 04 DK 4 3 3/16“ 6 - SUEM04L SUEM04R06
SIN 04 DK 06 4 3 3/16“ 6 - SUEM06L -
SIN 04 DK 08 4 3 3/16“ 6 - SUEM08L -
SIN 06 DK 6 4 1/4“ 8 - SUEM06L SUEM06R
SIN 06 DK 08 6 4 1/4“ 8 - SUEM08L -
SIN 08 DK 8 5 5/16“ 10 - SUEM08L SUEM08R10
SIN 08 DK 10 8 5 5/16“ 10 - SUEM10L -
SIN 10 DK 10 6 3/8“ 12 - SUEM10L -
SIN 13 DK 12 8 1/2“ 15 - SUEM13L -
SIN 13 DK 16 12 8 1/2“ 15 - SUEM16L -
SIN 16 DK 16 10 5/8“ 18 - SUEM16L -
Lock nut VM
4
Designation Thread
VM 10 M 10 x 1
VM 12 M 12 x 1,5
VM 14 M 14 x 1,5
VM 16 M 16 x 1,5
VM 18 M 18 x 1,5
VM 22 M 22 x 1,5
VM 26 M 26 x 1,5
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PN 02 AB 2 1,2 5/64“ G 1/8“ -28 27,5 14
PN 02 AB 06 2 1,2 5/64“ G 1/4“ -19 29,0 17
1
G
yellow chromized
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 02 AB 45 2 1,2 5/64“ G 1/8“ -28 44,5 15,0 14
PN 02 AB 06 45 2 1,2 5/64“ G 1/4“ -19 47,5 16,0 17
G1
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 02 AB 90 2 1,2 5/64“ G 1/8“ -28 34,0 26,0 14
PN 02 AB 06 90 2 1,2 5/64“ G 1/4“ -19 36,5 27,5 17
4
for external
Designation DN Size Inch Series pipe Ø G1 L1 S1 OR
mm mm mm mm mm
PN 02 AOL 04 2 1,2 5/64“ L 6 M 12 x 1,5 35,0 14 4,0 x 1,5
PN 02 AOL 06 2 1,2 5/64“ L 8 M 14 x 1,5 35,0 17 6,0 x 1,5
PN 02 AOL 08 2 1,2 5/64“ L 10 M 16 x 1,5 36,5 19 7,5 x 1,5
PN 02 AOL 10 2 1,2 5/64“ L 12 M 18 x 1,5 37,5 22 9,0 x 1,5
1
G
Surface protection: electro galvanised,
yellow chromized
4
for external
Designation DN Size Inch Series pipe Ø G1 L1 L2 S1 OR
mm mm mm mm mm mm
PN 02 AOL 04 45 2 1,2 5/64“ L 6 M 12 x 1,5 53,5 19,5 14 4,0 x 1,5
PN 02 AOL 06 45 2 1,2 5/64“ L 8 M 14 x 1,5 51,0 19,0 17 6,0 x 1,5
PN 02 AOL 08 45 2 1,2 5/64“ L 10 M 16 x 1,5 56,0 22,5 19 7,5 x 1,5
4
for external
Designation DN Size Inch Series pipe Ø G1 L1 L2 S1 OR
mm mm mm mm mm mm
PN 02 AOL 04 90 2 1,2 5/64“ L 6 M 12 x 1,5 42,0 36,0 14 4,0 x 1,5
PN 02 AOL 06 90 2 1,2 5/64“ L 8 M 14 x 1,5 40,5 36,0 17 6,0 x 1,5
PN 02 AOL 08 90 2 1,2 5/64“ L 10 M 16 x 1,5 41,5 40,0 19 7,5 x 1,5
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PN 02 HN 2 1,2 5/64“ NPT 1/8“ -27 30,0 12
PN 02 HN 06 2 1,2 5/64“ NPT 1/4“ -18 35,5 17
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PN 02 HJ 04 2 1,2 5/64“ UNF 3/8“ -24 34,0 12
PN 02 HJ 06 2 1,2 5/64“ UNF 7/16“ -20 34,5 12
PN 02 HJ 08 2 1,2 5/64“ UNF 1/2“ -20 36,0 14
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PN 02 AJ 04 2 1,2 5/64“ UNF 3/8“ -24 24,5 12
PN 02 AJ 06 2 1,2 5/64“ UNF 7/16“ -20 - 14
PN 02 AJ 08 2 1,2 5/64“ UNF 1/2“ -20 28,5 17
PN 02 AJ 10 2 1,2 5/64“ UNF 9/16“ -18 28,5 19
4
Designation DN Size Inch D1 L1
mm mm mm
PN 02 B 2 1,2 5/64“ 8,1 29,5
PN 02 B 04 2 1,2 5/64“ 10,1 31,5
4
Designation DN Size Inch D1 L1 L2
mm mm mm mm
PN 02 B 45 2 1,2 5/64“ 8,1 46,5 15,0
PN 02 B 04 45 2 1,2 5/64“ 10,1 51,0 23,5
4
Designation DN Size Inch D1 L1 L2
mm mm mm mm
PN 02 B 90 2 1,2 5/64“ 8,1 36,0 26,0
PN 02 B 04 90 2 1,2 5/64“ 10,1 32,0 38,0
2
D
yellow chromized
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PN 02 SKE 2 1,2 5/64“ M 16 x 2 32,5 19
PN 02 SKE 12 2 1,2 5/64“ S 12,65 x 1,5 32,5 17
PN 02 SKE 16 2 1,2 5/64“ M 16 x 1,5 32,5 19
1
G
Note: Appropriate mount: PMH 102
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 02 SKE 45 2 1,2 5/64“ M 16 x 2 48,0 18,5 19
PN 02 SKE 12 45 2 1,2 5/64“ S 12,65 x 1,5 48,0 19,0 17
PN 02 SKE 16 45 2 1,2 5/64“ M 16 x 1,5 48,0 18,5 19
G1 S1
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 02 SKE 90 2 1,2 5/64“ M 16 x 2 34,5 31,0 19
PN 02 SKE 12 90 2 1,2 5/64“ S 12,65 x 1,5 34,0 31,5 17
PN 02 SKE 16 90 2 1,2 5/64“ M 16 x 1,5 34,5 31,5 19
4
Designation DN Size Inch L1
mm mm
PN 02 S 2 1,2 5/64“ 27,0
4
Designation DN Size Inch L1 L2
mm mm mm
PN 02 S 45 2 1,2 5/64“ 55,0 24,0
4
Designation DN Size Inch L1 L2
mm mm mm
PN 02 S 90 2 1,2 5/64“ 32,0 41,0
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
PN 02 MMA 1/4 2 1,2 5/64“ G 1/4“ -19 26,5 17
PN 02 MMA 1/2 2 1,2 5/64“ G 1/2“ -14 31,5 27
S1
1
G
Note: Appropriate mount: PMH 102
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 02 MMA 1/4 45 2 1,2 5/64“ G 1/4“ -19 47,0 14,0 17
PN 02 MMA 1/2 45 2 1,2 5/64“ G 1/2“ -14 54,5 21,0 27
S1
G1
4
Designation DN Size Inch G1 L1 L2 S1
mm mm mm mm
PN 02 MMA 1/4 90 2 1,2 5/64“ G 1/4“ -19 38,0 25,0 17
PN 02 MMA 1/2 90 2 1,2 5/64“ G 1/2“ -14 41,5 38,5 27
Swage nipple for hose TAF 100 and TBF 200 TRP HB
Connection 1: BSP cylindrical outer thread S1
Seal type: 60° inner cone
Standard: ISO 228-1 (BS 5200)
Standard code: AGR DN G1
Delivery form: Swage nipple + swage ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
Swage nipple for hose TAF 100 and TBF 200 TRP AB
Connection 1: BSP nut thread SW S1
Seal type: 60° outer cone
Standard: DIN 3863
Standard code: DKR DN G1
Delivery form: Swage nipple + swage ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
Screw nipple for hose TAF 100 and TBF 200 TRN AB
Connection 1: BSP nut thread SW S1
Seal type: 60° outer cone
Standard: ISO 228-1 (BS 5200)
Standard code: DKR G1
DN
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
4
Designation DN Size Inch G1 L1 SW* S1
mm mm mm mm
TR N 04 AB 06 5 3 3/16“ G 1/4“ -19 42,5 12 17
TR N 06 AB 6 4 1/4“ G 1/4“ -19 58,5 12 17
TR N 10 AB 10 6 3/8“ G 3/8“ -19 68,5 17 22
Swage nipple for hose TAF 100 and TBF 200 TRP HL / TRP HS
Series: light and heavy S1
Connection 1: metric cylindrical outer thread
Seal type: 24° inner cone
Standard: DIN 3861 DN G1
Standard code: CEL / CES
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
4
for external
Designation DN Size Inch Series pipe Ø G1 L1 S1
mm mm mm mm
TR P 04 HL 5 3 3/16“ L 6 M 12 x 1,5 47,0 17
TR P 06 HL 6 4 1/4“ L 8 M 14 x 1,5 53,0 17
TR P 08 HL 8 5 5/16“ L 10 M 16 x 1,5 57,0 19
TR P 08 HL 10 8 5 5/16“ L 12 M 18 x 1,5 57,0 22
TR P 10 HL 10 6 3/8“ L 12 M 18 x 1,5 63,0 22
TR P 10 HL 13 10 6 3/8“ L 15 M 22 x 1,5 64,0 27
TR P 13 HL 12 8 1/2“ L 15 M 22 x 1,5 70,0 27
Screw nipple for hose TAF 100 and TBF 200 TRN HL / TRN HS
Series: light and heavy
Connection 1: metric cylindrical outer thread G1
DN
Seal type: 24° inner cone
Standard: DIN 3861
Standard code: CEL / CES
Material: Steel L1
Surface protection: electro galvanised,
yellow chromized
4
for external
Designation DN Size Inch Series pipe Ø G1 L1 S1
mm mm mm mm
TR N 04 HL 5 3 3/16“ L 6 M 12 x 1,5 39,5 12
TR N 06 HL 6 4 1/4“ L 8 M 14 x 1,5 56,5 14
TR N 08 HL 8 5 5/16“ L 10 M 16 x 1,5 59,0 17
TR N 08 HL 10 8 5 5/16“ L 12 M 18 x 1,5 59,0 19
TR N 10 HL 10 6 3/8“ L 12 M 18 x 1,5 65,5 19
TR N 20 HL 19 12 3/4“ L 22 M 30 x 2 85,0 30
Swage nipple for hose TAF 100 and TBF 200 TRP AOL / TRP AOS
Series: light and heavy SW S1
Connection 1: metric nut thread
Seal type: 24° outer cone with O-ring
Standard: DIN 3865 G1
DN
Standard code: DKOL / DKOS
Delivery form: Swage nipple + swage ferrule
Material: Steel OR
Surface protection: electro galvanised, L1
yellow chromized
4
for external
Designation DN Size Inch Series pipe Ø G1 L1 SW* S1 OR
mm mm mm mm mm mm
TRP 06 AOL 10 6 4 1/4“ L 12 M 18 x 1,5 57 17 22 9,0 x 1,5
Swage nipple for hose TAF 100 and TBF 200 TRP A
Connection 1: metric nut thread SW S1
Seal type: 60° outer cone
Standard: DIN 3863
Standard code: DKM DN G1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
4
Designation DN Size Inch G1 L1 SW* S1
mm mm mm mm
TR P 04 A 5 3 3/16“ M 12 x 1,5 55,0 10 17
TR P 04 A 08 5 3 3/16“ M 16 x 1,5 55,0 14 22
TR P 06 A 6 4 1/4“ M 14 x 1,5 61,0 14 19
TR P 06 A 08 6 4 1/4“ M 16 x 1,5 61,0 14 22
TR P 08 A 8 5 5/16“ M 16 x 1,5 64,0 17 22
TR P 10 A 10 6 3/8“ M 18 x 1,5 69,0 19 22
TR P 13 A 12 8 1/2“ M 22 x 1,5 75,0 24 27
Screw nipple for hose TAF 100 and TBF 200 TRN A
Connection 1: metric nut thread SW S1
Seal type: 60° outer cone
Standard: DIN 3863
Standard code: DKM G1
DN
Material: Steel
Surface protection: electro galvanised,
yellow chromized
L1
4
Designation DN Size Inch G1 L1 SW* S1
mm mm mm mm
TR N 04 A 5 3 3/16“ M 12 x 1,5 42,5 10 17
TR N 06 A 6 4 1/4“ M 14 x 1,5 58,5 12 17
TR N 06 A 08 6 4 1/4“ M 16 x 1,5 59,5 14 19
TR N 08 A 8 5 5/16“ M 16 x 1,5 61,0 14 19
TR N 08 A 10 8 5 5/16“ M 18 x 1,5 63,0 17 22
TR N 10 A 10 6 3/8“ M 18 x 1,5 69,5 17 22
TR N 10 A 13 10 6 3/8“ M 22 x 1,5 70,5 22 27
Swage nipple for hose TAF 100 and TBF 200 TRP HN
Connection 1: NPT conical outer thread S1
Seal type: thread seal
(additional 60° inner cone)
Standard: SAE J 476 A, SAE J 516 DN G1
(ANSI B 1.20.3)
Standard code: AGN
Delivery form: Swage nipple + swage ferrule
L1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
4
Designation DN Size Inch G1 L1 S1
mm mm mm
TR P 06 HN 6 4 1/4“ NPT 1/4“ -18 58,0 17
TR P 10 HN 10 6 3/8“ NPT 3/8“ -18 67,0 22
TR P 13 HN 12 8 1/2“ NPT 1/2“ -14 76,0 24
Swage nipple for hose TAF 100 and TBF 200 TRP FL / TRP FS
Series: light and heavy S1
Connection 1: Pipe socket
Seal type: Cutting ring connection
DN D2
Standard: DIN 2353
Standard code: BEL / BES
Delivery form: Swage nipple + swage ferrule L1
Material: Steel
Surface protection: electro galvanised,
yellow chromized
TR P 04 FS 5 3 3/16“ S 8 59,0 14
TR P 06 FS 6 4 1/4“ S 10 67,0 14
TR P 06 FS 04 6 4 1/4“ S 8 65,0 14
TR P 06 FS 08 6 4 1/4“ S 12 68,0 17
TR P 08 FS 8 5 5/16“ S 12 71,0 17
TR P 08 FS 06 8 5 5/16“ S 10 70,0 17
TR P 08 FS 10 8 5 5/16“ S 14 73,0 19
TR P 10 FS 10 6 3/8“ S 14 79,0 19
TR P 10 FS 06 10 6 3/8“ S 10 75,0 19
TR P 10 FS 08 10 6 3/8“ S 12 77,0 19
TR P 13 FS 12 8 1/2“ S 16 87,0 24
TR P 13 FS 16 12 8 1/2“ S 20 89,0 24
Screw nipple for hose TAF 100 and TBF 200 TRN FL / TRN FS
Series: light and heavy SW
Connection 1: Pipe socket
Seal type: Cutting ring connection
Standard: DIN 2353 DN D2
Standard code: BEL
Material: Steel
Surface protection: electro galvanised, L1
yellow chromized
Note: Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate mount based on the hose type.
4
Designation DN Size Inch Series D2 L1 SW*
mm mm mm mm
TR N 04 FL 5 3 3/16“ L 6 49,5 10
TR N 06 FL 6 4 1/4“ L 8 67,5 12
TR N 08 FL 8 5 5/16“ L 10 72,0 12
TR N 10 FL 10 6 3/8“ L 12 79,5 14
TR N 10 FL 13 10 6 3/8“ L 15 79,5 17
TR N 13 FL 12 8 1/2“ L 15 86,0 17
TR N 13 FL 16 12 8 1/2“ L 18 86,0 19
TR N 20 FL 19 10 5/8“ L 22 96,0 27
TR N 04 FS 5 3 3/16“ S 8 51,5 10
TR N 06 FS 04 6 4 1/4“ S 8 67,5 12
TR N 06 FS 6 4 1/4“ S 10 69,5 12
TR N 06 FS 08 6 4 1/4“ S 12 69,5 14
TR N 08 FS 8 5 5/16“ S 12 72,0 14
TR N 10 FS 10 6 3/8“ S 14 - -
TR N 13 FS 12 8 1/2“ S 16 - -
TR N 20 FS 19 12 3/4“ S 25 105,0 27
Screw nipple for hose TAF 100 and TBF 200 TRN FL 90
Series: light L1
Connection 1: Pipe socket
SW
Seal type: Cutting ring connection
Standard: DIN 2353 DN
Standard code: BEL
Material: Steel
Surface protection: electro galvanised, L2
yellow chromized
D2
Note: Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate mount based on the hose type.
4
Designation DN Size Inch D2 L1 L2 SW*
mm mm mm mm mm
TRN 04 FL 90 5 3 3/16“ 6 45,0 44,0 10
Swage nipple for hose TAF 100 and TBF 200 TRP AJ
Connection 1: UN/UNF nut thread SW S1
Seal type: 74° inner cone
Standard: SAE J514
Standard code: DKJ DN G1
Delivery form: Swage nipple + swage ferrule
Material: Steel
Surface protection: electro galvanised,
yellow chromized L1
4
Designation DN Size Inch G1 L1 SW* S1
mm mm mm mm
TR P 04 AJ 06 4 3 3/16“ UNF 7/16“ -20 55,0 14 17
TR P 06 AJ 6 4 1/4“ UNF 7/16“ -20 61,0 14 17
TR P 06 AJ 08 6 4 1/4“ UNF 1/2“ -20 61,0 14 17
TR P 06 AJ 10 6 4 1/4“ UNF 9/16“ -18 61,0 14 19
TR P 08 AJ 8 5 5/16“ UNF 1/2“ -20 64,0 17 17
TR P 08 AJ 10 8 5 5/16“ UNF 9/16“ -18 64,0 17 19
TR P 10 AJ 10 6 3/8“ UNF 9/16“ -18 69,0 19 19
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
TR 04 AB 06 4 3 3/16“ G 1/4“ -19 28 17
TR 10 AB 10 6 3/8“ G 3/8“ -19 34 20
TR 10 AB 13 10 6 3/8“ G 1/2“ -14 - -
L1
4
for external
Designation DN Size Inch G1 pipe Ø L1 S1
mm mm mm mm
TR 04 HL 4 3 3/16“ M 12 x 1,5 6 30,0 -
TR 06 HL 6 4 1/4“ M 14 x 1,5 8 31,0 -
TR 08 HL 06 8 5 5/16“ M 14 x 1,5 8 38,0 -
TR 08 HL 8 5 5/16“ M 16 x 1,5 10 38,0 -
TR 10 HL 08 10 6 3/8“ M 16 x 1,5 10 38,0 -
TR 10 HL 10 6 3/8“ M 18 x 1,5 12 39,0 -
TR 13 HL 12 8 1/2“ M 22 x 1,5 15 52,0 -
TR 16 HL 16 10 5/8“ M 26 x 1,5 18 - -
L1
4
Designation DN Size Inch G1 L1 S1
mm mm mm
TR 04 A 4 3 3/16“ M 12 x 1,5 28,0 14
TR 06 A 6 4 1/4“ M 14 x 1,5 28,0 17
TR 06 A 08 6 4 1/4“ M 16 x 1,5 28,0 19
TR 08 A 06 8 5 5/16“ M 14 x 1,5 34,0 19
TR 08 A 8 5 5/16“ M 16 x 1,5 34,0 19
TR 10 A 08 10 6 3/8“ M 16 x 1,5 34,0 19
TR 10 A 10 6 3/8“ M 18 x 1,5 34,0 22
TR 13 A 12 8 1/2“ M 22 x 1,5 45,0 27
TR 16 A 16 10 5/8“ M 26 x 1,5 45,0 32
4
Designation DN Size Inch D1 L1
mm mm mm
TR 04 B 02 4 3 3/16“ 8 24,0
TR 04 B 4 3 3/16“ 10 26,0
TR 06 B 04 6 4 1/4“ 10 26,0
TR 06 B 6 4 1/4“ 12 28,0
TR 06 B 08 6 4 1/4“ 14 28,0
TR 06 B 10 6 4 1/4“ 16 30,0
TR 08 B 06 8 5 5/16“ 12 34,0
TR 08 B 8 5 5/16“ 14 34,0
TR 08 B 10 8 5 5/16“ 16 36,0
TR 10 B 08 10 6 3/8“ 14 34,0
TR 10 B 10 6 3/8“ 16 36,0
TR 13 B 12 8 1/2“ 18 32,0
4
Designation DN Size Inch D1 L1
mm mm mm
TR 08 BR 10 8 5 5/16“ 17 -
Note: Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
4
Designation DN Size Inch Series D2 L1
mm mm mm
TR 04 FL 4 3 3/16“ L 6 36,0
TR 06 FL 6 4 1/4“ L 8 38,0
TR 08 FL 8 5 5/16“ L 10 47,0
TR 08 FL 06 8 5 5/16“ L 8 45,0
TR 10 FL 10 6 3/8“ L 12 47,0
TR 10 FL 08 10 6 3/8“ L 10 48,0
TR 13 FL 12 8 1/2“ L 15 57,0
TR 16 FL 16 10 5/8“ L 18 57,0
TR 08 FS 8 5 5/16“ S 12 47,0
TR 06 FS 6 4 1/4“ S 10 41,0
4
Designation DN Size Inch G1 L1 S1
mm mm mm
KANA 13 HB 12 8 1/2“ G 1/2“ -14 - -
KANA 20 HB 19 12 3/4“ G 3/4“ -14 - -
KANA 20 HB 25 19 12 3/4“ G 1“ -11 - -
KANA 25 HB 25 16 1“ G 1“ -11 - -
4
Designation DN Size Inch G1 L1 S1
mm mm mm
KANA 13 AB 12 8 1/2“ G 1/2“ -14 - -
KANA 20 AB 19 12 3/4“ G 3/4“ -14 - -
KANA 20 AB 25 19 12 3/4“ G 1“ -11 - -
KANA 25 AB 25 16 1“ G 1“ -11 - -
KANA 25 AB 32 25 16 1“ G 1.1/4“ -11 - -
Note: PU seal
4
Designation DN Size Inch G1 S1 S2
mm mm mm
TWA 20 AR 25 19 12 3/4“ G 1“ -11 36 36
Hose mounts
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHD 104 5 3 3/16“ 17,0 8,5 26,0
PHD 106 6 4 1/4“ 20,0 10,9 31,0
PHD 108 8 5 5/16“ 21,0 12,8 31,0
PHD 110 10 6 3/8“ 24,0 14,0 31,0
PHD 113 12 8 1/2“ 28,0 18,3 35,0
PHD 116 16 10 5/8“ 31,0 21,8 36,0
PHD 120 19 12 3/4“ 35,0 24,8 42,5
PHD 125 25 16 1“ 42,0 30,5 50,5
PHD 132 31 20 1.1/4“ 52,0 37,7 59,0
PHD 140 38 24 1.1/2“ 58,0 44,2 63,0
PHD 150 51 32 2“ 62,0 57,2 70,0
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PHD 204 5 3 3/16“ 21,0 8,5 26,0
PHD 206 6 4 1/4“ 22,0 11,4 30,0
PHD 208 8 5 5/16“ 23,0 12,5 30,0
PHD 210 10 6 3/8“ 26,0 14,5 31,0
PHD 213 12 8 1/2“ 30,0 18,3 32,0
PHD 216 16 10 5/8“ 33,0 21,6 36,0
PHD 220 19 12 3/4“ 38,0 24,4 42,5
PHD 225 25 16 1“ 46,0 30,5 51,0
PHD 232 31 20 1.1/4“ 57,0 38,0 58,0
PHD 240 38 24 1.1/2“ 65,0 44,3 62,0
PHD 250 51 32 2“ 79,0 57,0 73,5
PHD 260 60 38 2.3/8“ 84,0 67,1 79,0
PHD 276 75 48 3“ 105,0 81,8 80,0
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHD 406 VA 6 4 1/4“ 22,0 10,3 34,5
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PKP 106 6 4 1/4“ 19,0 11,0 27,3
PKP 108 8 5 5/16“ 20,6 12,6 30,2
PKP 110 10 6 3/8“ 23,6 14,1 30,2
PKP 113 12 8 1/2“ 25,2 17,6 32,1
PKP 116 16 10 5/8“ 30,0 21,6 34,0
PKP 120 19 12 3/4“ 33,0 24,6 36,8
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHN 204 5 3 3/16“ 21,0 9,5 23,5
PHN 206 6 4 1/4“ 23,0 11,4 30,0
PHN 208 8 5 5/16“ 24,0 13,2 30,0
PHN 210 10 6 3/8“ 26,0 14,5 31,0
PHN 213 12 8 1/2“ 29,0 18,3 32,0
PHN 216 16 10 5/8“ 33,0 21,6 36,0
PHN 220 19 12 3/4“ 37,0 24,4 42,5
PHN 225 25 16 1“ 46,0 31,0 51,0
PHN 232 31 20 1.1/4“ 59,0 38,3 57,5
PHN 240 38 24 1.1/2“ 67,0 44,0 60,5
PHN 250 51 32 2“ 80,0 57,0 74,0
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PHD 106 VA 6 4 1/4“ 20,0 10,3 34,5
PHD 108 VA 8 5 5/16“ 22,0 12,0 34,5
PHD 110 VA 10 6 3/8“ 25,0 14,0 35,0
PHD 113 VA 12 8 1/2“ 28,0 17,2 37,0
PHD 116 VA 16 10 5/8“ 32,0 20,2 40,0
PHD 120 VA 19 12 3/4“ 36,0 24,2 45,0
PHD 125 VA 25 16 1“ 45,0 31,5 50,0
PHD 132 VA 31 20 1.1/4“ 55,0 37,7 70,0
PHD 140 VA 38 24 1.1/2“ 60,0 45,1 70,0
PHD 150 VA 51 32 2“ 76,0 57,7 80,0
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PKN 106 6 4 1/4“ 18,0 11,2 30,5
PKN 108 8 5 5/16“ 19,0 12,7 32,0
PKN 110 10 6 3/8“ 22,0 14,5 33,0
PKN 113 12 8 1/2“ 26,0 18,3 34,0
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PHT 204 5 3 3/16“ 17,0 9,8 27,3
PHT 06 6 4 1/4“ 19,0 11,6 28,0
PHT 08 8 5 5/16“ 22,3 12,6 30,2
PHT 10 10 6 3/8“ 23,0 14,9 29,5
PHT 13 12 8 1/2“ 27,0 18,5 31,0
PHT 16 16 10 5/8“ 32,0 21,8 33,0
PHT 20 19 12 3/4“ 35,0 24,6 37,5
PHT 25 25 16 1“ 42,0 30,8 45,5
PHT 32 31 20 1.1/4“ 48,0 37,9 55,0
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHT 304 5 3 3/16“ 18,6 9,8 27,3
PHT 06 6 4 1/4“ 19,0 11,6 28,0
PHT 08 8 5 5/16“ 22,3 12,6 30,2
PHT 10 10 6 3/8“ 23,0 14,9 29,5
PHT 13 12 8 1/2“ 27,0 18,5 31,0
PHT 16 16 10 5/8“ 32,0 21,8 33,0
PHT 20 19 12 3/4“ 35,0 24,6 37,5
PHT 25 25 16 1“ 42,0 30,8 45,5
PHT 32 31 20 1.1/4“ 48,0 37,9 55,0
PHT 40 38 24 1.1/2“ 57,2 44,2 63,2
PHT 50 51 32 2“ 75,9 56,8 78,5
LF
Note: The processing dimensions are to be taken from our current press dimension table.
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PHY 104 5 2 3/16“ 16,0 9,5 28,0
PHY 106 6 4 1/4“ 19,0 11,6 29,5
PHY 108 8 5 5/16“ 22,0 12,7 29,5
PHY 110 10 6 3/8“ 23,0 14,3 32,5
PHY 113 12 8 1/2“ 26,0 18,6 34,0
PHY 116 16 10 5/8“ 30,0 22,0 36,5
PHY 120 19 12 3/4“ 33,0 25,7 41,0
PHY 125 25 16 1“ 40,0 31,8 41,0
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHY 306 6 4 1/4“ 18,0 11,3 43,0
PHY 308 8 5 5/16“ 20,0 11,3 40,0
PHY 310 10 6 3/8“ 23,0 13,7 47,0
PHY 313 12 8 1/2“ 29,0 16,6 50,0
PHY 316 16 10 5/8“ 32,0 19,9 60,0
PHY 320 19 12 3/4“ 37,0 24,5 60,0
PHY 325 25 16 1“ 42,0 29,5 60,0
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PHY 704 N 5 3 3/16“ 15,0 9,5 29,0
PHY 706 N 6 4 1/4“ 18,0 10,8 31,0
PHY 708 N 8 5 5/16“ 20,0 12,5 31,0
PHY 710 N 10 6 3/8“ 22,0 14,6 33,2
PHY 713 N 12 8 1/2“ 27,0 18,3 37,0
PHY 716 N 16 10 5/8“ 31,6 21,7 36,8
PHY 720 N 19 12 3/4“ 36,4 24,7 42,5
PHY 725 N 25 16 1“ 42,7 30,5 50,5
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHY 804 N 5 3 3/16“ 15,0 9,5 29,0
PHY 806 N 6 4 1/4“ 19,0 11,9 31,0
PHY 808 N 8 5 5/16“ 21,0 12,7 31,0
PHY 810 N 10 6 3/8“ 23,0 14,8 33,0
PHY 813 N 12 8 1/2“ 27,0 18,3 37,0
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
D6
mm
LF
mm
PHY 2106 6 4 1/4“ 20,5 9,2 22,0 43,0
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PSGB 120 19 12 3/4“ 42,0 29,0 35,0
PSGB 125 25 16 1“ 48,0 35,0 44,0
PSGB 132 31 20 1.1/4“ 55.0 39,8 58.5
PSGB 140 38 24 1.1/2“ 65,0 45,8 63,0
PSGB 150 51 32 2“ 75,0 59,8 78,0
PSGB 160 60 38 2.3/8“ 85,0 67,1 79,0
LF
5 SIH 103
SIH 104
3
5 3
- -
3/16“
10,0
12,0
6,5
7,5
17,0
20,0
SIH 106 6 4 1/4“ 13,5 10,0 20,0
SIH 108 8 5 5/16“ 16,0 11,7 20,0
SIH 110 10 6 3/8“ 19,0 13,8 26,0
SIH 113 12 8 1/2“ 24,5 17,0 33,0
SIH 116 16 10 5/8“ 28,0 20,5 34,0
SIH 204 5 3 3/16“ 12,0 7,5 17,0
SIH 206 6 4 1/4“ 13,5 10,0 20,0
SIH 304 5 3 3/16“ 13,5 7,5 20,0
SIH 306 6 4 1/4“ 15,0 10,0 20,0
SIH 308 8 5 5/16“ 17,0 11,7 21,0
SIH 310 10 6 3/8“ 22,0 15,6 32,0
SIH 404 5 3 3/16“ 13,5 7,5 20,0
SIH 406 6 4 1/4“ 17,0 11,7 21,0
SIH 408 8 5 5/16“ 18,0 13,8 21,0
SIH 410 10 6 3/8“ 22,0 15,6 32,0
SIH 413 12 8 1/2“ 26,5 19,5 33,0
SIH 504 5 3 3/16“ 9,0 5,5 17,0
SIH 510 10 6 3/8“ 11,7 15,0 20,0
SIH 513 12 8 1/2“ 13,8 18,0 21,0
SIH 605 5 3 3/16“ 11,0 6,5 17,0
SIH 606 6 4 1/4“ 13,5 7,5 20,0
SIH 613 12 8 1/2“ 22,0 15,6 32,0
SIH 706 6 4 1/4“ 15,0 7,5 20,0
SIH 713 12 8 1/2“ 23,0 17,0 32,0
LF
LF
5 Designation DN
mm
Size Inch D2
mm
LF
mm
SW*
mm
BFH 204 5 3 3/16“ 8,8 25,0 12
BFH 206 6 4 1/4“ 12,4 36,0 17
BFH 208 8 5 5/16“ 14,0 38,0 19
BFH 210 10 6 3/8“ 17,5 44,5 22
BFH 213 12 8 1/2“ 21,0 51,0 27
BFH 220 19 12 3/4“ 26,5 57,0 30
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PHF 104 5 3 3/16“ 13,0 8,3 30,0
PHF 106 6 4 1/4“ 15,0 10,6 32,0
PHF 108 8 5 5/16“ 17,0 12,2 33,0
PHF 110 10 6 3/8“ 19,0 13,7 33,0
PHF 113 12 8 1/2“ 24,0 18,0 37,0
PHF 116 16 10 5/8“ 27,0 21,5 37,0
PHF 120 19 12 3/4“ 32,0 25,0 41,0
PHF 125 25 16 1“ 38,0 31,0 41,0
LF
5 Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm
PHF 206 6 4 1/4“ 16,0 10,6 33,0
PHF 208 8 5 5/16“ 19,0 12,3 33,0
PHF 210 10 6 3/8“ 21,0 13,7 35,0
PHF 213 12 8 1/2“ 26,0 18,5 37,0
PHF 216 16 10 5/8“ 27,0 21,5 37,0
PHF 220 19 12 3/4“ 32,0 25,0 41,0
PHF 225 25 16 1“ 38,0 31,0 41,0
LF
Designation DN
mm
Size Inch D1
mm
D3
mm
LF
mm 5
PMH 102 2 1,2 5/64“ 8,0 4,8 15,3
Couplings
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Accessories:
AKF ZUB GEHAEUSE: Dust protection housing
Spare parts:
AKF ZUB FEDER: Spring
AKF ZUB HUELSE: Spring sleeve
6 AKL 08 HL 1
AKL 10 HL 1
8
10
L
L
10
12
M 16 x 1,5
M 18 x 1,5
1
1
Rd. 32 x 3
Rd. 32 x 3
315
315
250
250
4
4
-40 to +100
-40 to +100
AKL 13 HL 3 12 L 15 M 22 x 1,5 3 Rd. 48 x 3 315 250 4 -40 to +100
AKL 16 HL 3 16 L 18 M 26 x 1,5 3 Rd. 48 x 3 315 250 4 -40 to +100
AKL 20 HL 5 19 L 22 M 30 x 2 5 Rd. 60 x 3 160 100 4 -40 to +100
AKL 25 HL 5 25 L 28 M 36 x 2 5 Rd. 60 x 3 160 100 4 -40 to +100
Accessories:
AKL ZUB DOSE: Dust protection container
Spare parts:
AKL ZUB BLINDSTUTZEN: Dummy socket
Designation Size
AKF ZUB 1 06 1
AKF ZUB 3 06 3
Designation Size
AKF ZUB 1 14 1
AKF ZUB 3 14 3
Spare parts:
AKL ZUB KONTERMUTTER: Counter nut
Temperature for
Designation DN Series pipe Ø Connecting Size Coupling OP* SF* mineral oil
mm mm thread thread bar coupled °C
RKF 06 HL 1 6 L 8 M 14 x 1,5 1 Rd. 32 x 3 315 4,0 -25 to +85
RKF 08 HL 1
RKF 10 HL 1
8
10
L
L
10
12
M 16 x 1,5
M 18 x 1,5
1
1
Rd. 32 x 3
Rd. 32 x 3
315
315
4,0
4,0
-25 to +85
-25 to +85 6
RKF 13 HL 1 12 L 15 M 22 x 1,5 1 Rd. 32 x 3 315 4,0 -25 to +85
RKF 13 HL 2 12 L 15 M 22 x 1,5 2 Rd. 36 x 3 300 4,0 -25 to +85
RKF 13 HL 3 12 L 15 M 22 x 1,5 3 Rd. 48 x 3 300 3,5 -25 to +100
RKF 16 HL 2 16 L 18 M 26 x 1,5 2 Rd. 36 x 3 300 4,0 -25 to +100
RKF 16 HL 3 16 L 18 M 26 x 1,5 3 Rd. 48 x 3 300 3,5 -25 to +100
RKF 16 HL 4 16 L 18 M 26 x 1,5 4 Rd. 54 x 4 300 3,5 -25 to +85
RKF 20 HL 4 19 L 22 M 30 x 2 4 Rd. 54 x 4 160 4,0 -25 to +85
RKF 20 HL 5 19 L 22 M 30 x 2 5 Rd. 60 x 3 160 4,0 -40 to +100
RKF 25 HL 4 25 L 28 M 36 x 2 4 Rd. 54 x 4 160 4,0 -25 to +85
RKF 25 HL 5 25 L 28 M 36 x 2 5 Rd. 60 x 3 160 4,0 -40 to +100
RKF 32 HL 6 31 L 35 M 45 x 2 6 Rd. 79 x 4 160 4,0 -25 to +85
Accessories:
RKF ZUB: Dust protection container
RKF ZUBS: Cap
Spare parts:
RKF STUETZRING: Support ring
RKF ORING: O-ring
Temperature for
Designation DN Series pipe Ø Connecting Size Coupling OP* SF* mineral oil
mm mm thread thread bar coupled °C
RKL 06 HL 1 6 L 8 M 14 x 1,5 1 Rd. 32 x 3 315 4 -25 to + 85
6 RKL 08 HL 1
RKL 10 HL 1
8
10
L
L
10
12
M 16 x 1,5
M 18 x 1,5
1
1
Rd. 32 x 3
Rd. 32 x 3
315
315
4
4
-25 to +85
-25 to +85
RKL 13 HL 1 12 L 15 M 22 x 1,5 1 Rd. 32 x 3 315 4 -25 to +85
RKL 13 HL 2 12 L 15 M 22 x 1,5 2 Rd. 36 x 3 300 4 -25 to +85
RKL 13 HL 3 12 L 15 M 22 x 1,5 3 Rd. 48 x 3 300 3,5 -25 to +100
RKL 16 HL 3 16 L 18 M 26 x 1,5 3 Rd. 48 x 3 300 3,5 -25 to +100
RKL 16 HL 4 16 L 18 M 26 x 1,5 4 Rd. 54 x 4 300 3,5 -25 to +85
RKL 20 HL 4 19 L 22 M 30 x 2 4 Rd. 54 x 4 160 4 -25 to +85
RKL 20 HL 5 19 L 22 M 30 x 2 5 Rd. 60 x 3 160 4 -40 to +100
RKL 25 HL 4 25 L 28 M 36 x 2 4 Rd. 54 x 4 160 4 -25 to +85
RKL 25 HL 5 25 L 28 M 36 x 2 5 Rd. 60 x 3 160 4 -40 to +100
RKL 32 HL 6 31 L 35 M 45 x 2 6 Rd. 79 x 4 160 4 -25 to +85
Spare parts:
RKL DICHTUNG: Sealing washer
RKL STUETZRING: Support ring
RKL ORING: O-ring
Designation Size
RKF ZUB 2 10 2
Designation Size
SK ZUB 3 16 1
Accessories:
AKL ZUB BLINDSTUTZEN: Dummy socket
Designation Size d1 d2 S
mm mm mm
RKF STUETZRING 1 1 17,5 20,8 1,0
RKF STUETZRING 2 2 20,0 23,4 1,0
RKF STUETZRING 4 4 32,0 37,2 1,0
Designation Size d1 d2 S
mm mm mm
RKF ORING 1-17-2 1 17,0 21,0 2,0
RKF ORING 1-22-1,5 1 22,0 25,0 1,5
RKF ORING 2-20-2 2 20,0 24,0 2,0
Designation Size d1 d2 S
mm mm mm
RKL DICHTUNG 1 1 15,5 17,1 1,6
RKL DICHTUNG 2 2 15,0 18,0 1,5
RKL DICHTUNG 3 3 20,0 27,0 2,0
RKL DICHTUNG 4 4 25,0 29,3 1,7
6
Designation Size d1 d2 S
mm mm mm
RKL STUETZRING 1 1 17,5 20,8 1,0
RKL STUETZRING 2 2 20,0 23,4 1,0
RKL STUETZRING 4 4 32,0 37,2 1,0
Designation Size d1 d2 S
mm mm mm
RKL ORING 1-17-2 1 17,5 21,5 2,0
RKL ORING 2-20-2 2 22,0 26,0 2,0
RKL ORING 4-24-3 4 24,0 30,0 3,0
RKL ORING 4-32-3 4 32,0 38,0 3,0
6
Spare parts:
SKF BREMSRING: Brake ring for SKF
SKF DISA: Sealing kit Accessories:
SKF ORING: O-ring for SKF SKF ZUBS: Dust protection for SKF
SKF STUETZRING: Support ring for SKF SKF ZUBS AL: Cap
* pipe Ø = for external pipe Ø – OP = Operating pressure – SF = Safety factor
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKF 06 IR 1 6 G 1/4“ -19 1 Rd. 24 x 2 450 4 -30 to +100
6 SKF 10 IR 2
SKF 10 IR 3
10
10
G 3/8“ -19
G 3/8“ -19
2
3
Rd. 28 x 2
Rd. 36 x 2
325
300
4
4
-30 to +100
-30 to +100
SKF 13 IR 3 12 G 1/2“ -14 3 Rd. 36 x 2 300 4 -30 to +100
SKF 20 IR 4 19 G 3/4“ -14 4 Rd. 42 x 2 250 4 -30 to +100
SKF 20 IR 5 19 G 3/4“ -14 5 Rd. 48 x 3 250 4 -30 to +100
SKF 25 IR 5 25 G 1“ -11 5 Rd. 48 x 3 250 4 -30 to +100
SKF 32 IR 6 32 G 1.1/4“ -11 6 Rd. 70 x 3 300 4 -25 to +100
SKF 40 IR 6 40 G 1.1/2“ -11 6 Rd. 70 x 3 300 4 -25 to +100
Accessories:
SKF ZUBS: Dust protection for SKF
SKF ZUBS AL: Cap
Spare parts:
SKF BREMSRING: Brake ring for SKF
SKF ORING: O-ring for SKF
SKF STUETZRING: Support ring for SKF
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKF 06 IM 1 6 M 14 x 1,5 1 Rd. 24 x 2 450 4 -25 to +100
SKF 08 IM 2
SKF 10 IM 3
8
10
M 16 x 1,5
M 18 x 1,5
2
3
Rd. 28 x 2
Rd. 36 x 2
325
300
4
4
-30 to +100
-30 to +100 6
SKF 13 IM 3 12 M 22 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKF 13 IM 4 12 M 22 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKF 16 IM 4 16 M 26 x 1,5 4 Rd. 42 x 2 250 4 -25 to +100
SKF 20 IM 5 19 M 30 x 1,5 5 Rd. 48 x 3 250 4 -25 to +125
Accessories:
SKF ZUBS: Dust protection for SKF
SKF ZUBS AL: Cap
Spare parts:
SKF BREMSRING: Brake ring for SKF
SKF ORING: O-ring for SKF
SKF STUETZRING: Support ring for SKF
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKF 10 HJ 2 10 UNF 9/16“ -18 2 Rd. 28 x 2 450 4 -25 to +100
Accessories:
SKF ZUBS: Dust protection for SKF
SKF ZUBS AL: Cap
Accessories:
SKF ZUBS: Dust protection for SKF
SKF ZUBS AL: Cap
Temperature for
Designation DN Connecting Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKF 13 IM AE 12 M 22 x 1,5 Rd. 35 x 2 350 4 -30 to +100
6 SKF 16 IM AE
SKF 20 IM AE
16
19
M 26 x 1,5
M 30 x 1,5
Rd. 42 x 2
Rd. 54 x 3
350
350
-
4
-30 to +100
-30 to +100
SKF 25 IM AE 25 M 38 x 1,5 Rd. 64 x 3 350 - -30 to +100
Accessories:
SKF ZUBS AE: Dust protection for SKF...AE
Temperature for
Designation DN Connecting Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKFS 20 IR E 19 G 3/4“ -14 Rd. 44 x 2,5 250 3 -25 to +100
SKFS 25 IR E 25 G 1“ -11 Rd. 54 x 2,5 230 3 -25 to +100 6
Accessories:
SKF ZUBS E: Dust protection for SKF...E
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
6 SKF 06 IN SP
SKF 10 IN 06 SP
6
10
NPT 1/4“ -18
NPT 1/4“ -18
1
2
-
-
700
700
3
3
-25 to +125
-25 to +125
SKF 10 IN SP 10 NPT 3/8“ -18 2 - 700 3 -30 to +80
Accessories:
SKF ZUBS SP: Dust protection for SKF...SP
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKF 06 IN SP KE
SKF 10 IN SP KE
6
10
NPT 1/4“ -18
NPT 3/8“ -18
1
2
-
-
1050
1000
3
3
-25 to +125
-25 to +125
6
Temperature for
Designation DN Connecting SW* Coupling OP* SF* mineral oil
mm thread mm thread bar coupled °C
SKF 10 IR RO 10 G 3/8“ -19 22 Rd. 36 x 3 500 4 -30 to +120
SKF 13 IR RO 12 G 1/2“ -14 26 Rd. 40 x 3 450 4 -30 to +120
SKF 20 IR RO 19 G 3/4“ -14 30 Rd. 45 x 3 400 4 -30 to +120
6 SKF 25 IR RO
SKF 32 IR RO
25
31
G 1“ -11
G 1.1/4“ -11
40
48
Rd. 58 x 4
Rd. 65 x 5
350
320
4
4
-30 to +120
-30 to +120
SKF 40 IR RO 38 G 1.1/2“ -11 55 Rd. 75 x 5 300 4 -30 to +120
SKF 50 IR RO 51 G 2“ -11 76 Rd. 108 x 5 250 4 -30 to +120
Accessories:
SK ZUB 01 RO: Welded on bracket for Roflex coupling
SKF ZUBS 08 RO: Dust protection for SKF...RO
Spare parts:
SKF ZUB 10 RO: O-ring for SKF...RO
SKF ZUB 11 RO: Support ring for SKF...RO
SK ZUB 04 RO: Tool kit (3 piece), for Roflex coupling
SK ZUB 12 RO: Conical nipple for Roflex coupling
SK ZUB 13 RO: Sealing spring for Roflex coupling
SK ZUB 14 RO: Circlip for Roflex coupling
SK ZUB 15 RO: Threaded ring for Roflex coupling
Temperature for
Designation DN Connecting Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKF 20 IR SN 75 19 G 3/4“ -14 1.3/4“ -8 345 4 -40 to +90
SKF 25 IR SN 75 25 G 1“ -11 2.1/4“ -6 345 4 -40 to +90
SKF 32 IR SN 75 31 G 1.1/4“ -11 2.5/8“ -6 345 3 -40 to +90
SKF 40 IR SN 75
SKF 50 IR SN 75
38
51
G 1.1/2“ -11
G 2“ -11
3.1/4“ -4
4“ -4
345
345
3
3
-40 to +90
-40 to +90
6
SKF 65 IR SN 75 65 G 2.1/2“ -11 5“ -4 207 2 -40 to +90
SKF 75 IR SN 75 75 G 3“ -11 6“ -4 207 2 -40 to +90
Accessories:
SKF ZUBS SN 75: Dust protection for SKF...SN 75
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKF 20 IR F SN 78 19 G 3/4“ -14 207 2 -40 to +90
SKF 25 IR F SN 78 25 G 1“ -11 207 2 -40 to +90
SKF 32 IR F SN 78 31 G 1.1/4“ -11 190 2 -40 to +90
Accessories:
SKF ZUBS F SN 78: Dust protection for SKF...SN 78
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKF 20 IN F SN 78 19 NPT 3/4“ -14 207 2 -40 to +90
SKF 25 IN F SN 78 25 NPT 1“ -11,5 207 2 -40 to +90
SKF 32 IN F SN 78 32 NPT 1.1/4“ -11,5 190 2 -40 to +90
Accessories:
SKF ZUBS F SN 78: Dust protection for SKF...SN 78
Temperature for
Designation DN Series pipe Ø Connecting Size Coupling OP* SF* mineral oil
mm mm thread thread bar coupled °C
SKL 04 HL 1 4 L 6 M 12 x 1,5 1 Rd. 24 x 2 315 4 -25 to +100
SKL 06 HL 1 6 L 8 M 14 x 1,5 1 Rd. 24 x 2 450 4 -30 to +100
SKL 06 HL 2 6 L 8 M 14 x 1,5 2 Rd. 28 x 2 325 4 -30 to +100
6 SKL 06 HL 3
SKL 08 HL 2
6
8
L
L
8
10
M 14 x 1,5
M 16 x 1,5
3
2
Rd. 36 x 2
Rd. 28 x 2
300
325
4
4
-30 to +100
-30 to +100
SKL 08 HL 3 8 L 10 M 16 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKL 10 HL 3 10 L 12 M 18 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKL 10 HL 4 10 L 12 M 18 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKL 13 HL 3 12 L 15 M 22 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKL 13 HL 4 12 L 15 M 22 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKL 16 HL 3 16 L 18 M 26 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKL 16 HL 4 16 L 18 M 26 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKL 16 HL 5 16 L 18 M 26 x 1,5 5 Rd. 48 x 3 250 4 -30 to +100
SKL 20 HL 5 19 L 22 M 30 x 2 5 Rd. 48 x 3 250 4 -30 to +100
SKL 25 HL 5 25 L 28 M 36 x 2 5 Rd. 48 x 3 250 4 -30 to +100
SKL 32 HL 5 31 L 35 M 45 x 2 5 Rd. 48 x 3 250 4 -30 to +100
SKL 32 HL 6 31 L 35 M 45 x 2 6 Rd. 70 x 3 160 4 -25 to +100
SKL 40 HL 6 38 L 42 M 52 x 2 6 Rd. 70 x 3 160 4 -25 to +100
Temperature for
Designation DN Series pipe Ø Connecting Size Coupling OP* SF* mineral oil
mm mm thread thread bar coupled °C
SKLS 04 HL 1 4 L 6 M 12 x 1,5 1 Rd. 24 x 2 315 4 -25 to +100
SKLS 06 HL 1 6 L 8 M 14 x 1,5 1 Rd. 24 x 2 450 4 -30 to +100
SKLS 06 HL 2 6 L 8 M 14 x 1,5 2 Rd. 28 x 2 270 4 -30 to +100
SKLS 06 HL 3
SKLS 08 HL 2
6
8
L
L
8
10
M 14 x 1,5
M 16 x 1,5
3
2
Rd. 36 x 2
Rd. 28 x 2
300
270
4
4
-30 to +100
-30 to +100 6
SKLS 08 HL 3 8 L 10 M 16 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKLS 10 HL 3 10 L 12 M 18 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKLS 10 HL 4 10 L 10 M 18 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKLS 13 HL 3 12 L 15 M 22 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKLS 13 HL 4 12 L 15 M 22 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKLS 16 HL 3 16 L 18 M 26 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKLS 16 HL 4 16 L 18 M 26 x 1,5 4 Rd. 42 x 2 250 4 -30 to +100
SKLS 16 HL 5 16 L 18 M 26 x 1,5 5 Rd. 48 x 3 250 4 -30 to +100
SKLS 20 HL 5 19 L 22 M 30 x 2 5 Rd. 48 x 3 250 4 -30 to +100
SKLS 25 HL 5 25 L 28 M 36 x 2 5 Rd. 48 x 3 250 4 -30 to +100
SKLS 32 HL 6 31 L 38 M 45 x 2 6 Rd. 70 x 3 160 4 -25 to +100
SKLS 40 HL 6 38 L 42 M 52 x 2 6 Rd. 70 x 3 160 4 -25 to +100
Accessories:
SKL ZUBS: Dust protection for SKL
SKL ZUBS AL: Dust protector
* pipe Ø = for external pipe Ø – OP = Operating pressure – SF = Safety factor
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKL 06 IR 1 6 G 1/4“ -19 1 Rd. 24 x 2 450 4 -30 to +100
SKL 10 IR 2 10 G 3/8“ -19 2 Rd. 28 x 2 325 4 -30 to +100
SKL 10 IR 3 10 G 3/8“ -19 3 Rd. 36 x 2 300 4 -30 to +100
6 SKL 13 IR 3
SKL 20 IR 4
12
19
G 1/2“ -14
G 3/4“ -14
3
4
Rd. 36 x 2
Rd. 42 x 2
300
250
4
4
-30 to +100
-30 to +100
SKL 20 IR 5 19 G 3/4“ -14 5 Rd. 48 x 3 250 4 -30 to +100
SKL 25 IR 5 25 G 1“ -11 5 Rd. 48 x 3 250 4 -30 to +100
SKL 32 IR 6 31 G 1.1/4“ -11 6 Rd. 70 x 3 300 4 -25 to +100
SKL 40 IR 6 38 G 1.1/2“ -11 6 Rd. 70 x 3 300 4 -25 to +100
Accessories:
SKL ZUBS: Dust protection for SKL
SKL ZUBS AL: Dust protector
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKL 06 IM 1 6 M 14 x 1,5 1 Rd. 24 x 2 450 4 -25 to +100
SKL 08 IM 2 8 M 16 x 1,5 2 Rd. 28 x 2 325 4 -30 to +100
SKL 10 IM 3 10 M 18 x 1,5 3 Rd. 36 x 2 300 4 -30 to +100
SKL 13 IM 3
SKL 13 IM 4
12
12
M 22 x 1,5
M 22 x 1,5
3
4
Rd. 36 x 2
Rd. 42 x 2
300
250
4
4
-30 to +100
- 30 to + 100
6
SKL 16 IM 4 16 M 26 x 1,5 4 Rd. 42 x 2 250 4 -25 to +100
SKL 20 IM 5 19 M 30 x 2 5 Rd. 48 x 3 250 4 -25 to +125
Accessories:
SKL ZUBS: Dust protection for SKL
SKL ZUBS AL: Dust protector
Temperature for
Designation DN Connecting Size Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKL 10 HJ 2 10 UNF 9/16“ -18 2 Rd. 28 x 2 450 4 -25 to +100
Accessories:
SKL ZUBS: Dust protection for SKL
SKL ZUBS AL: Dust protector
Temperature for
Designation DN Connecting Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKL 13 IM AE 12 M 22 x 1,5 Rd. 35 x 2 350 4 -30 to +100
SKL 16 IM AE
SKL 20 IM AE
16
19
M 26 x 1,5
M 30 x 1,5
Rd. 42 x 2
Rd. 54 x 3
350
350
-
4
-30 to +100
-30 to +100 6
SKL 25 IM AE 25 M 38 x 1,5 Rd. 64 x 3 350 - -40 to +150
Accessories:
SKL ZUBS AE: Dust protection for SKL...AE
Accessories:
SKL ZUBS E: Dust protection for SKL...E
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKL 06 HN SP 6 NPT 1/4“ -18 700 3 -25 to +110
SKL 10 HN 06 SP
SKL 10 HN SP
10
10
NPT 1/4“ -18
NPT 3/8“ -18
700
700
3
3
-25 to +125
-30 to +80 6
Accessories:
SKL ZUBS SP: Dust protection for SKL...SP
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKL 06 HN SP KE 6 NPT 1/4“ -18 1050 3 -25 to +125
Accessories:
SKF ZUBS SP: Dust protection for SKF...SP
Note: To prevent the hexagonal nuts from coming loose if vibrations occur, they must be securely tightened with
a flat spanner.
Temperature for
Designation DN Connecting SW* Coupling OP* SF* mineral oil
mm thread mm thread bar coupled °C
SKL 10 IR RO 10 G 3/8“ -19 45 Rd. 36 x 3 500 4 -30 to +120
SKL 13 IR RO
SKL 20 IR RO
12
19
G 1/2“ -14
G 3/4“ -14
50
55
Rd. 40 x 3
Rd. 45 x 3
450
400
4
4
-30 to +120
-30 to +120 6
SKL 25 IR RO 25 G 1“ -11 70 Rd. 58 x 4 350 4 -30 to +120
SKL 32 IR RO 31 G 1.1/4“ -11 80 Rd. 65 x 5 320 4 -30 to +120
SKL 40 IR RO 38 G 1.1/2“ -11 87 Rd. 75 x 5 300 4 -30 to +120
SKL 50 IR RO 51 G 2“ -11 130 Rd. 108 x 5 250 4 -30 to +120
Accessories:
SKL ZUBS 09 RO: Dust protection for SKL...RO
SK ZUB 01 RO: Welded on bracket for Roflex coupling
SKL ZUB 03 RO: Flat spanner for SKL...RO
Spare parts:
SK ZUB 12 RO: Conical nipple for Roflex coupling
SK ZUB 13 RO: Sealing spring for Roflex coupling
SK ZUB 14 RO: Circlip for Roflex coupling
SK ZUB 15 RO: Threaded ring for Roflex coupling
SK ZUB 04 RO: Tool kit (3 piece) for Roflex coupling
Temperature for
Designation DN Connecting Coupling OP* SF* mineral oil
mm thread thread bar coupled °C
SKL 20 IR SN 75 19 G 3/4“ -14 1.3/4“ -8 345 4 -40 to +90
SKL 25 IR SN 75 25 G 1“ -11 2.1/4“ -6 345 4 -40 to +90
SKL 32 IR SN 75 31 G 1.1/4“ -11 2.5/8“ -6 345 3 -40 to +90
6 SKL 40 IR SN 75
SKL 50 IR SN 75
38
51
G 1.1/2“ -11
G 2“ -11
3.1/4“ -4
4“ -4
345
345
3
3
-40 to +90
-40 to +90
SKL 65 IR SN 75 65 G 2.1/2“ -11 5“ -4 207 2 -40 to +90
SKL 75 IR SN 75 75 G 3“ -11 6“ -4 207 2 -40 to +90
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKL 20 IR F SN 78 19 G 3/4“ -14 207 2 -40 to +90
SKL 25 IR F SN 78 25 G 1“ -11 207 2 -40 to +90
SKL 32 IR F SN 78 31 G 1.1/4“ -11 190 2 -40 to +90
SKL 40 IR F SN 78 38 G 1.1/2“ -11 175 2 -40 to +90
6
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKL 20 IR F SN 78 SK 19 G 3/4“ -14 207 2 -40 to +90
SKL 25 IR F SN 78 SK 25 G 1“ -11 207 2 -40 to +90
SKL 32 IR F SN 78 SK 31 G 1.1/4“ -11 190 2 -40 to +90
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKL 20 IN F SN 78 19 NPT 3/4“ -14 207 2 -40 to +90
SKL 25 IN F SN 78 25 NPT 1“ -11,5 207 2 -40 to +90
SKL 32 IN F SN 78 31 NPT 1.1/4“ -11,5 190 2 -40 to +90
SKL 40 IN F SN 78 38 NPT 1.1/2“ -11,5 175 2 -40 to +90
6
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKL 20 IN F SN 78 SK 19 NPT 3/4“ -14 207 2 -40 to +90
SKL 25 IN F SN 78 SK 25 NPT 1“ -11,5 207 2 -40 to +90
SKL 32 IN F SN 78 SK 31 NPT 1.1/4“ -11,5 190 2 -40 to +90
Designation DN
mm
SKF ZUBS SP 04 6
SKF ZUBS SP 06 10
SKF ZUBS 08 RO 03 M 36 x 3
SKF ZUBS 08 RO 04 M 40 x 3
SKF ZUBS 08 RO 05 M 45 x 3
SKF ZUBS 08 RO 06
SKF ZUBS 08 RO 07
M 58 x 4
M 65 x 5
6
SKF ZUBS 08 RO 08 M 75 x 5
SKF ZUBS 08 RO 09 M 108 x 5
SK ZUB 01 RO 03 3/8“
SK ZUB 01 RO 04 1/2“
SK ZUB 01 RO 05 3/4“
6 SK ZUB 01 RO 06
SK ZUB 01 RO 07
1“
1.1/4“
SK ZUB 01 RO 08 1.1/2“
SK ZUB 01 RO 09 2“
Designation DN
mm
SKF ZUBS 20 F SN 78 19
SKF ZUBS 25 F SN 78 25
SKF ZUBS 32 F SN 78 31
Designation Size DN
mm
SKL ZUBS SP 04 4 6
SKL ZUBS SP 06 6 10
Designation DN
mm
SKL ZUBS 20 F SN 78 19
SKL ZUBS 25 F SN 78 25
SKL ZUBS 32 F SN 78 31
SKL ZUBS 09 RO 03 M 36 x 3
SKL ZUBS 09 RO 04 M 40 x 3
SKL ZUBS 09 RO 05 M 45 x 3
SKL ZUBS 09 RO 06
SKL ZUBS 09 RO 07
M 58 x 4
M 65 x 5
6
SKL ZUBS 09 RO 08 M 75 x 5
SKL ZUBS 09 RO 09 M 108 x 5
SK ZUB 01 RO 03 3/8“
SK ZUB 01 RO 04 1/2“
SK ZUB 01 RO 05 3/4“
6 SK ZUB 01 RO 06
SK ZUB 01 RO 07
1“
1.1/4“
SK ZUB 01 RO 08 1.1/2“
SK ZUB 01 RO 09 2“
Designation SW*
mm
SKL ZUB 03 RO 03 45
SKL ZUB 03 RO 04 50
SKL ZUB 03 RO 05 55
SKL ZUB 03 RO 06
SKL ZUB 03 RO 07
70
80
6
SKL ZUB 03 RO 08 87
SKL ZUB 03 RO 09 130
Designation Size d1 d2 S
mm mm mm
SKF BREMSRING 1 1 19,0 25,0 3,0
SKF BREMSRING 2 2 23,0 29,0 3,0
SKF BREMSRING 3 3 31,0 37,0 3,0
6 SKF BREMSRING 4
SKF BREMSRING 5
4
5
36,0
43,0
42,0
50,0
3,0
3,5
SKF BREMSRING 6 6 64,0 72,0 4,0
Spare parts:
SKF HJ: Screw coupling (fixed)
SKF SF: Screw coupling (fixed)
Designation Size d1 d2 S
mm mm mm
SKF ORING 1 1 12,5 16,5 2,0
SKF ORING 2 2 17,0 21,0 2,0
SKF ORING 3 3 22,0 28,0 3,0
SKF ORING 4
SKF ORING 5
4
5
28,0
35,0
34,0
40,0
3,0
2,5
6
SKF ORING 6 6 54,0 60,0 3,0
Spare parts:
SKF HJ: Screw coupling (fixed)
SKF SF: Screw coupling (fixed)
Designation Size d1 d2 S
mm mm mm
SKF STUETZRING 1 1 13,0 16,1 1
SKF STUETZRING 2 2 17,5 20,7 1
SKF STUETZRING 3 3 22,0 27,4 1
6 SKF STUETZRING 4
SKF STUETZRING 5
4
5
28,0
35,0
33,2
39,0
1
1
SKF STUETZRING 6 6 54,0 58,6 1
Spare parts:
SKF HJ: Screw coupling (fixed)
SKF SF: Screw coupling (fixed)
6 SKF ZUB 11 RO 07
SKF ZUB 11 RO 08
1.1/4“
1.1/2“
46,5
57,5
56,0
63,7
2,0
1,5
SKF ZUB 11 RO 09 2“ 74,5 83,5 2,0
6 SK ZUB 13 RO 06
SK ZUB 13 RO 07
1“
1.1/4“
27
33
SK ZUB 13 RO 08 1.1/2“ 40
SK ZUB 13 RO 09 2“ 47
SK ZUB 14 RO 03 3/8“
SK ZUB 15 RO 04 1/2“
SK ZUB 15 RO 05 3/4“
SK ZUB 15 RO 06 1“
6 SK ZUB 15 RO 07
SK ZUB 15 RO 08
1.1/4“
1.1/2“
SK ZUB 15 RO 09 2“
6 SK ZUB 12 RO 06
SK ZUB 12 RO 07
1“
1.1/4“
30
36
SK ZUB 12 RO 08 1.1/2“ 44
SK ZUB 12 RO 09 2“ 55
SK ZUB 14 RO 03 3/8“
SK ZUB 15 RO 04 1/2“
SK ZUB 15 RO 05 3/4“
SK ZUB 15 RO 06 1“
SK ZUB 15 RO 07
SK ZUB 15 RO 08
1.1/4“
1.1/2“
6
SK ZUB 15 RO 09 2“
6 SK ZUB 04 RO 06
SK ZUB 04 RO 07
1“
1.1/4“
Fuß- Ø 19,5
Fuß- Ø 26,0
29 x 6
38 x 6
35 x 4
40 x 5
SK ZUB 04 RO 08 1.1/2“ Fuß- Ø 32,0 44 x 6 50 x 5
SK ZUB 04 RO 09 2“ Fuß- Ø 38,0 56 x 6 60 x 5
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKM 04 HL 2 4 L 6 M 12 x 1,5 2 250 4 -30 to +100
SKM 06 HL 2 6 L 8 M 14 x 1,5 2 250 4 -30 to +100
SKM 06 HL 3 6 L 8 M 14 x 1,5 3 225 4 -30 to +100
SKM 08 HL 2
SKM 08 HL 3
8
8
L
L
10
10
M 16 x 1,5
M 16 x 1,5
2
3
250
225
4
4
-30 to +100
-30 to +100
6
SKM 10 HL 3 10 L 12 M 18 x 1,5 3 225 4 -30 to +100
SKM 10 HL 4 10 L 12 M 18 x 1,5 4 225 4 -30 to +100
SKM 13 HL 3 12 L 15 M 22 x 1,5 3 225 4 -30 to +100
SKM 13 HL 4 12 L 15 M 22 x 1,5 4 225 4 -30 to +100
SKM 16 HL 3 16 L 18 M 26 x 1,5 3 225 4 -30 to +100
SKM 16 HL 4 16 L 18 M 26 x 1,5 4 225 4 -30 to +100
SKM 16 HL 5 16 L 18 M 26 x 1,5 5 225 4 -30 to +100
SKM 20 HL 4 19 L 22 M 30 x 2 4 225 4 -30 to +100
SKM 20 HL 5 19 L 22 M 30 x 2 5 225 4 -30 to +100
SKM 25 HL 5 25 L 28 M 36 x 2 5 225 4 -30 to +100
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKMS 04 HL 2 4 L 6 M 12 x 1,5 2 300 4 -25 to +125
SKMS 06 HL 2 6 L 8 M 14 x 1,5 2 250 4 -30 to +100
6 SKMS 06 HL 3
SKMS 08 HL 2
6
8
L
L
8
10
M 14 x 1,5
M 16 x 1,5
3
2
225
250
4
4
-30 to +100
-30 to +100
SKMS 08 HL 3 8 L 10 M 16 x 1,5 3 225 4 -30 to +100
SKMS 10 HL 3 10 L 12 M 18 x 1,5 3 225 4 -30 to +100
SKMS 10 HL 4 10 L 12 M 18 x 1,5 4 225 4 -30 to +100
SKMS 13 HL 3 12 L 15 M 22 x 1,5 3 225 4 -30 to +100
SKMS 13 HL 4 12 L 15 M 22 x 1,5 4 225 4 -30 to +100
SKMS 16 HL 3 16 L 18 M 26 x 1,5 3 225 4 -30 to +100
SKMS 16 HL 4 16 L 18 M 26 x 1,5 4 225 4 -30 to +100
SKMS 16 HL 5 16 L 18 M 26 x 1,5 5 225 4 -30 to +100
SKMS 20 HL 4 19 L 22 M 30 x 2 4 225 4 -30 to +100
SKMS 20 HL 5 19 L 22 M 30 x 2 5 225 4 -30 to +100
SKMS 25 HL 5 25 L 28 M 36 x 2 5 225 4 -30 to +100
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 04 IR 1 4 G 1/8“ -28 1 300 4 -25 to +100
SKM 06 IR 1 6 G 1/4“ -19 1 250 4 -30 to +100
SKM 10 IR 2
SKM 10 IR 3
10
10
G 3/8“ -19
G 3/8“ -19
2
3
250
225
4
4
-30 to +100
-30 to +100
6
SKM 13 IR 3 12 G 1/2“ -14 3 225 4 -30 to +100
SKM 20 IR 4 19 G 3/4“ -14 4 225 4 -30 to +100
SKM 20 IR 5 19 G 3/4“ -14 5 225 4 -30 to +100
SKM 25 IR 5 25 G 1“ -11 5 225 4 -30 to +100
Accessories:
SKM ZUBS: Dust protection for coupling sleeve (clip) for SKM
SKM ZUB 311: Quick release clip with dust protection
SKM ZUB 312: Quick release clip with spring
SKM ZUB 313: Single quick release clip
SKM ZUB 314: Double quick release clip
SKM ZUBS 3 C B: Dust protection for coupling sleeve (clip) for SKM Spare parts:
SKM ZUBS 3 CLIP: Dust protection for coupling sleeve (clip) for SKM SKM ORING: O-ring for SKM
SKM ZUB BLINDSTECKER: Dummy connector SKM STUETZRING: Support ring for SKM
* OP = Operating pressure – SF = Safety factor
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 04 IM 1 4 M 12 x 1,5 1 300 4 -25 to +100
6 SKM 06 IM 1
SKM 08 IM 2
6
8
M 14 x 1,5
M 16 x 1,5
1
2
300
250
4
4
-25 to +100
-30 to +100
SKM 08 IM 3 8 M 16 x 1,5 3 225 4 -25 to +125
SKM 10 IM 2 10 M 18 x 1,5 2 250 4 -30 to +100
SKM 10 IM 3 10 M 18 x 1,5 3 225 4 -30 to +100
SKM 10 IM 4 10 M 18 x 1,5 4 225 4 -25 to +125
SKM 13 IM 3 12 M 22 x 1,5 3 225 4 -30 to +100
SKM 13 IM 4 12 M 22 x 1,5 4 225 4 -30 to +100
SKM 20 IM 5 19 M 30 x 1,5 5 225 4 -25 to +125
Accessories:
SKM ZUBS: Dust protection for coupling sleeve (clip) for SKM
SKM ZUB 311: Quick release clip with dust protection
SKM ZUB 312: Quick release clip with spring
SKM ZUB 313: Single quick release clip
SKM ZUB 314: Double quick release clip
SKM ZUBS 3 C B: Dust protection for coupling sleeve (clip) for SKM Spare parts:
SKM ZUBS 3 CLIP: Dust protection for coupling sleeve (clip) for SKM SKM ORING: O-ring for SKM
SKM ZUB BLINDSTECKER: Dummy connector SKM STUETZRING: Support ring for SKM
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 13 IJ 3 JD 12 UNF 3/4“ -16 3 250 4 -25 to +125
Accessories:
SKM ZUBS: Dust protection for coupling sleeve (clip) for SKM
SKM ZUB 311: Quick release clip with dust protection
SKM ZUB 312: Quick release clip with spring
SKM ZUB 313: Single quick release clip
SKM ZUB 314: Double quick release clip
SKM ZUBS 3 C B: Dust protection for coupling sleeve (clip) for SKM Spare parts:
SKM ZUBS 3 CLIP: Dust protection for coupling sleeve (clip) for SKM SKM ORING: O-ring for SKM
SKM ZUB BLINDSTECKER: Dummy connector SKM STUETZRING: Support ring for SKM
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IR T 6 G 1/4“ -19 450 2,5 -30 to +100
SKM 10 IR T 10 G 3/8“ -19 350 3 -30 to +100
SKM 13 IR T 12 G 1/2“ -14 300 3 -30 to +100
6 SKM 20 IR T
SKM 25 IR T
19
25
G 3/4“ -14
G 1“ -11
280
250
2,5
3,5
-30 to +100
-30 to +100
Accessories:
SKM ZUBS T: Dust protection for coupling sleeve for SKM...T
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IR AE 10 G 3/8“ -19 210 4 -25 to +100
SKM 13 IR AE 12 G 1/2“ -14 210 4 -25 to +100
SKM 20 IR AE 20 G 3/4“ -14 250 4 -25 to +100
SKM 25 IR AE 25 G 1“ -11 200 4 -25 to +100
6
Accessories:
SKM ZUBS AE: Dust protection for coupling sleeve for SKM...AE
Spare parts:
SKM ORING AE: O-ring for SKM...AE
SKM STUETZRING AE: Support ring for SKM...AE
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IM AE 10 M 18 x 1,5 210 4 -25 to +100
SKM 13 IM AE 12 M 22 x 1,5 210 4 -25 to +125
Accessories:
SKM ZUBS AE: Dust protection for coupling sleeve for SKM...AE
Spare parts:
SKM ORING AE: O-ring for SKM...AE
SKM STUETZRING AE: Support ring for SKM...AE
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IN AE 6 NPT 1/4“ -18 210 4 -25 to +125
SKM 10 IN AE 10 NPT 3/8“ -18 210 4 -25 to +125
SKM 13 IN AE 12 NPT 1/2“ -14 210 4 -25 to +125
SKM 20 IN AE
SKM 25 IN AE
19
25
NPT 3/4“ -14
NPT 1“ -11,5
210
200
4
4
-25 to +125
-25 to +125
6
Accessories:
SKM ZUBS AE: Dust protection for coupling sleeve for SKM...AE
Spare parts:
SKM ORING AE: O-ring for SKM...AE
SKM STUETZRING AE: Support ring for SKM...AE
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IR 2 ARG 10 G 3/8“ -19 2 250 4 -30 to +100
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 08 IM 2 ARG 8 M 16 x 1,5 2 400 4 -40 to +100
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 04 IR HC 4 G 1/8“ -28 1000 2,5 -30 to +100
SKM 06 IR HC 6 G 1/4“ -19 1000 2,5 -30 to +100
SKM 10 IR HC 10 G 3/8“ -19 1000 2,5 -30 to +100
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IN HC 6 NPT 1/4“ -18 1000 2,5 -30 to +100
SKM 10 IN HC 10 NPT 3/8“ -18 1000 2,5 -30 to +100
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IR MC 6 G 1/4“ -19 250 4 -30 to +100
SKM 10 IR MC 10 G 3/8“ -19 250 4 -30 to +100
SKM 13 IR MC 12 G 1/2“ -14 250 4 -30 to +100
6 SKM 20 IR MC
SKM 25 IR MC
19
25
G 3/4“ -14
G 1“ -11
320
320
3
3
-30 to +100
-30 to +100
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IR SP 6 G 1/4“ -19 200 4 -25 to +110
SKM 10 IR SP 10 G 3/8“ -19 200 4 -25 to +110
SKM 13 IR SP 12 G 1/2“ -14 200 4 -25 to +125
SKM 20 IR SP 19 G 3/4“ -14 200 4 -25 to +125
6
Accessories:
SKM ZUBS SP: Dust protection for coupling sleeve for SKM...SP
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IN SP 6 NPT 1/4“ -18 200 4 -25 to +110
SKM 10 IN SP 10 NPT 3/8“ -18 200 4 -25 to +110
SKM 13 IN SP 12 NPT 1/2“ -14 200 4 -25 to +125
6 SKM 13 IN 20 SP
SKM 20 IN SP
12
19
NPT 3/4“ -14
NPT 3/4“ -14
200
200
-
4
-40 to +110
-25 to +110
SKM 25 IN SP 25 NPT 1“ -11,5 200 4 -25 to +110
Accessories:
SKM ZUBS SP: Dust protection for coupling sleeve for SKM...SP
Accessories:
SKM ZUBS SP: Dust protection for coupling sleeve for SKM...SP
Accessories:
SKM ZUBS SP: Dust protection for coupling sleeve for SKM...SP
Accessories:
SKM ZUBS: Dust protection for coupling sleeve (clip) for SKM
SKM ZUB BLINDSTECKER: Dummy connector
Spare parts:
SKM ORING: O-ring for SKM
SKM STUETZRING: Support ring for SKM
Accessories:
SKM ZUBS: Dust protection for coupling sleeve (clip) for SKM
Spare parts:
SKM ORING: O-ring for SKM
SKM STUETZRING: Support ring for SKM
Accessories:
SKM ZUBS: Dust protection for coupling sleeve (clip) for SKM
SKM ZUB BLINDSTECKER: Dummy connector
Spare parts:
SKM ORING: O-ring for SKM
SKM STUETZRING: Support ring for SKM
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 04 IR SN 72 5 G 1/8“ -28 345 4 -40 to +90
SKM 06 IR SN 72 6 G 1/4“ -19 500 4 -25 to +90
SKM 10 IR SN 72 10 G 3/8“ -19 250 4 -25 to +90
6 SKM 13 IR SN 72
SKM 20 IR SN 72
12
19
G 1/2“ -14
G 3/4“ -14
250
250
4
4
-25 to +90
-25 to +90
SKM 25 IR SN 72 25 G 1“ -11 200 4 -25 to +90
Accessories:
SKM ZUBS SN 72: Dust protection for coupling sleeve for SKM...SN 72
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IR SN H 6 G 1/4“ -19 450 2 -40 to +90
SKM 10 IR SN H 10 G 3/8“ -19 310 2 -40 to +90
SKM 13 IR SN H 12 G 1/2“ -14 280 2 -40 to +90
SKM 20 IR SN H
SKM 25 IR SN H
19
25
G 3/4“ -14
G 1“ -11
245
140
2
2
-40 to +90
-40 to +90
6
SKM 32 IR SN H 31 G 1.1/4“ -11 125 2 -40 to +90
SKM 40 IR SN H 38 G 1.1/2“ -11 105 2 -40 to +90
SKM 50 IR SN H 51 G 2“ -11 105 2 -40 to +90
SKM 65 IR SN H 65 G 2.1/2“ -11 70 2 -40 to +90
SKM 75 IR SN H 75 G 3“ -11 55 2 -40 to +90
Accessories:
SKM ZUBS SN H: Dust protection for coupling sleeve for SKM...SN H
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IN SN H 6 NPT 1/4“ -18 450 2 -40 to +90
SKM 10 IN SN H 10 NPT 3/8“ -18 310 2 -40 to +90
SKM 13 IN SN H 12 NPT 1/2“ -14 280 2 -40 to +90
6 SKM 20 IN SN H
SKM 25 IN SN H
19
25
NPT 3/4“ -14
NPT 1“ -11,5
245
140
2
2
-40 to +90
-40 to +90
SKM 32 IN SN H 31 NPT 1.1/4“ -11,5 125 2 -40 to +90
SKM 40 IN SN H 38 NPT 1.1/2“ -11,5 105 2 -40 to +90
SKM 65 IN SN H 65 NPT 2.1/2“ -8 70 2 -40 to +90
SKM 75 IN SN H 75 NPT 3“ -8 55 2 -40 to +90
Accessories:
SKM ZUBS SN H: Dust protection for coupling sleeve for SKM...SN H
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKS 04 HL 2 4 L 6 M 12 x 1,5 2 250 4 -30 to +100
SKS 06 HL 2 6 L 8 M 14 x 1,5 2 250 4 -30 to +100
SKS 06 HL 3 6 L 8 M 14 x 1,5 3 225 4 -30 to +100
SKS 08 HL 2
SKS 08 HL 3
8
8
L
L
10
10
M 16 x 1,5
M 16 x 1,5
2
3
250
225
4
4
-30 to +100
-30 to +100
6
SKS 10 HL 3 10 L 12 M 18 x 1,5 3 225 4 -30 to +100
SKS 10 HL 4 10 L 12 M 18 x 1,5 4 225 4 -30 to +100
SKS 13 HL 3 12 L 15 M 22 x 1,5 3 225 4 -30 to +100
SKS 13 HL 4 12 L 15 M 22 x 1,5 4 225 4 -30 to +100
SKS 16 HL 3 16 L 18 M 26 x 1,5 3 225 4 -30 to +100
SKS 16 HL 4 16 L 18 M 26 x 1,5 4 225 4 -30 to +100
SKS 16 HL 5 16 L 18 M 26 x 1,5 5 225 4 -30 to +100
SKS 20 HL 4 19 L 22 M 30 x 2 4 225 4 -30 to +100
SKS 20 HL 5 19 L 22 M 30 x 2 5 225 4 -30 to +100
SKS 25 HL 5 25 L 28 M 36 x 2 5 225 4 -30 to +100
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
SKS ZUB 3: Connector clip for coupling connector for SKS
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKSS 04 HL 2 5 L 6 M 12 x 1,5 2 250 4 -30 to +100
SKSS 06 HL 2 6 L 8 M 14 x 1,5 2 250 4 -30 to +100
SKSS 06 HL 3 6 L 8 M 14 x 1,5 3 225 4 -30 to +100
6 SKSS 08 HL 2
SKSS 08 HL 3
8
8
L
L
10
10
M 16 x 1,5
M 16 x 1,5
2
3
250
225
4
4
-30 to +100
-30 to +100
SKSS 10 HL 3 10 L 12 M 18 x 1,5 3 225 4 -30 to +100
SKSS 10 HL 4 10 L 12 M 18 x 1,5 4 225 4 -30 to +100
SKSS 13 HL 3 12 L 15 M 22 x 1,5 3 225 4 -30 to +100
SKSS 13 HL 4 12 L 15 M 22 x 1,5 4 225 4 -30 to +100
SKSS 16 HL 3 16 L 18 M 26 x 1,5 3 225 4 -30 to +100
SKSS 16 HL 4 16 L 18 M 26 x 1,5 4 225 4 -30 to +100
SKSS 16 HL 5 16 L 18 M 26 x 1,5 5 225 4 -30 to +100
SKSS 20 HL 4 16 L 22 M 30 x 2 4 225 4 -30 to +100
SKSS 20 HL 5 19 L 22 M 30 x 2 5 225 4 -30 to +100
SKSS 25 HL 5 25 L 28 M 36 x 2 5 225 4 -30 to +100
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
SKS ZUB 3: Connector clip for coupling connector for SKS
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKS 06 HL 3 UDK 6 L 8 M 14 x 1,5 3 225 4 -25 to +125
SKS 08 HL 3 UDK 8 L 10 M 16 x 1,5 3 225 4 -25 to +125
SKS 10 HL 3 UDK 10 L 12 M 18 x 1,5 3 225 4 -25 to +125
SKS 13 HL 3 UDK
SKS 16 HL 3 UDK
12
16
L
L
15
18
M 22 x 1,5
M 26 x 1,5
3
3
225
225
4
4
-25 to +125
-25 to +125
6
SKS 06 HS 3 UDK 6 S 10 M 18 x 1,5 3 225 4 -25 to +125
SKS 08 HS 3 UDK 8 S 12 M 20 x 1,5 3 225 4 -25 to +125
SKS 10 HS 3 UDK 10 S 14 M 22 x 1,5 3 225 4 -25 to +125
SKS 13 HS 3 UDK 12 S 16 M 24 x 1,5 3 225 4 -25 to +125
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKSS 06 HL 3 UDK 6 L 8 M 14 x 1,5 3 225 4 -25 to +125
SKSS 08 HL 3 UDK 8 L 10 M 16 x 1,5 3 225 4 -25 to +125
SKSS 10 HL 3 UDK 10 L 12 M 18 x 1,5 3 225 4 -25 to +125
6 SKSS 13 HL 3 UDK
SKSS 16 HL 3 UDK
12
16
L
L
15
18
M 22 x 1,5
M 26 x 1,5
3
3
225
225
4
4
-25 to +125
-25 to +125
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
Temperature for
Designation DN Connecting L Size OP* SF* mineral oil
mm thread mm bar coupled °C
SKS 04 IR 1 5 G 1/8“ -28 42,0 1 300 4 -25 to +100
SKS 06 IR 1 6 G 1/4“ -19 44,0 1 250 4 -30 to +100
SKS 10 IR 2 10 G 3/8“ -19 49,0 2 250 4 -30 to +100
SKS 10 IR 3
SKS 13 IR 3
10
12
G 3/8“ -19
G 1/2“ -14
60,0
48,0
3
3
225
225
4
4
-30 to +100
-30 to +100
6
SKS 20 IR 4 19 G 3/4“ -14 67,5 4 225 4 -30 to +100
SKS 20 IR 5 19 G 3/4“ -14 76,0 5 225 4 -30 to +100
SKS 25 IR 5 25 G 1“ -11 76,0 5 225 4 -30 to +100
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
SKS ZUB 3: Connector clip for coupling connector for SKS
Temperature for
Designation DN Connecting L Size OP* SF* mineral oil
mm thread mm bar coupled °C
SKS 04 IM 1 5 M 12 x 1,5 45,0 1 300 4 -25 to +100
SKS 06 IM 1 6 M 14 x 1,5 45,0 1 300 4 -25 to +100
SKS 08 IM 2 8 M 16 x 1,5 49,0 2 250 4 -30 to +100
6 SKS 08 IM 3
SKS 10 IM 2
8
10
M 16 x 1,5
M 18 x 1,5
59,0
49,0
3
2
225
300
4
4
-25 to +120
-25 to +120
SKS 10 IM 3 10 M 18 x 1,5 60,0 3 225 4 -30 to +100
SKS 10 IM 4 10 M 18 x 1,5 63,5 4 225 4 -25 to +125
SKS 13 IM 3 12 M 22 x 1,5 48,0 3 225 4 -30 to +100
SKS 13 IM 4 12 M 22 x 1,5 63,5 4 225 4 -30 to +100
SKS 20 IM 5 19 M 30 x 1,5 76,0 5 225 4 -25 to +125
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
SKS ZUB 3: Connector clip for coupling connector for SKS
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKS 13 IJ 3 JD 12 UNF 3/4“ -16 3 200 4 -25 to +125
Accessories:
SKS ZUBS: Dust protection for coupling connector for SKS
Temperature for
Designation DN Size Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 06 IR T 6 4 G 1/4“ -19 450 2,5 -30 to +100
SKS 10 IR T 10 6 G 3/8“ -19 350 3 -30 to +100
SKS 13 IR T 12 8 G 1/2“ -14 300 3 -30 to +100
6 SKS 20 IR T
SKS 25 IR T
19
25
12
16
G 3/4“ -14
G 1“ -11
280
250
2,5
3,5
-30 to +100
-30 to +100
Accessories:
SKS ZUBS T: Dust protection for coupling connector for SKS...T
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IR AE 10 G 3/8“ -19 210 4 -25 to +100
SKS 13 IR AE 12 G 1/2“ -14 210 4 -25 to +100
SKS 20 IR AE 19 G 3/4“ -14 250 3,5 -25 to +125
SKS 25 IR AE 25 G 1“ -11 200 4 -25 to +125
6
Accessories:
SKS ZUBS AE: Dust protection for coupling connector for SKS...AE
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IM AE 10 M 18 x 1,5 210 4 -25 to +125
SKS 13 IM AE 12 M 22 x 1,5 210 4 -25 to +125
Accessories:
SKS ZUBS AE: Dust protection for coupling connector for SKS...AE
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 06 IN AE 6 NPT 1/4“ -18 210 4 -25 to +125
SKS 10 IN AE 10 NPT 3/8“ -18 210 4 -25 to +125
SKS 13 IN AE 12 NPT 1/2“ -14 210 4 -25 to +125
SKS 20 IN AE
SKS 25 IN AE
19
25
NPT 3/4“ -14
NPT 1“ -11,5
210
200
4
4
-25 to +125
-25 to +125
6
Accessories:
SKS ZUBS AE: Dust protection for coupling connector for SKS...AE
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IR 2 ARG 10 G 3/8“ -19 2 250 4 -30 to +100
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKS 08 IM 2 ARG 8 M 16 x 1,5 2 400 4 -40 to +100
Note: The connector may not be placed under load when uncoupled.
Temperature for
Designation DN Connecting L OP* mineral oil
mm thread mm bar SF* coupled °C
SKS 04 IR HC 5 G 1/8“ -28 33,3 1000 2,5 -30 to +100
SKS 06 IR HC 6 G 1/4“ -19 38,0 1000 2,5 -30 to +100
SKS 10 IR HC 10 G 3/8“ -19 39,5 1000 2,5 -30 to +100
Note: The connector may not be placed under load when uncoupled.
Temperature for
Designation DN Connecting L OP* SF* mineral oil
mm thread mm bar coupled °C
SKS 04 IN HC 5 NPT 1/8“ -27 33,3 1000 2,5 -30 to +100
SKS 06 IN HC 6 NPT 1/4“ -18 35,7 1000 2,5 -30 to +100
SKS 10 IN HC 10 NPT 3/8“ -18 37,0 1000 2,5 -30 to +100
Temperature for
Designation DN Connecting L OP* SF* mineral oil
mm thread mm bar coupled °C
SKS 06 IR MC 6 G 1/4“ -19 52,1 250 4 -30 to +100
SKS 10 IR MC 10 G 3/8“ -19 58,6 250 4 -30 to +100
SKS 13 IR MC 12 G 1/2“ -14 62,5 250 4 -30 to +100
6 SKS 20 IR MC
SKS 25 IR MC
19
25
G 3/4“ -14
G 1“ -11
80,0
86,0
320
320
3
3
-30 to +100
-30 to +100
Temperature for
Designation DN Connecting L OP* SF* mineral oil
mm thread mm bar coupled °C
SKS 06 IR SP 6 G 1/4“ -19 35,3 200 4 -25 to +110
SKS 10 IR SP 10 G 3/8“ -19 38,0 200 4 -25 to +110
SKS 13 IR SP 12 G 1/2“ -14 51,4 200 4 -25 to +125
SKS 20 IR SP 19 G 3/4“ -14 46,0 200 4 -25 to +125
6
Accessories:
SKS ZUBS SP: Dust protection for coupling connector for SKM...SP
Temperature for
Designation DN Connecting L OP* SF* mineral oil
mm thread mm bar coupled °C
SKS 06 IN SP 6 NPT 1/4“ -18 35,3 200 4 -25 to +110
SKS 10 IN SP 10 NPT 3/8“ -18 38,0 200 4 -25 to +110
SKS 13 IN SP 12 NPT 1/2“ -14 51,4 200 4 -25 to +125
6 SKS 13 IN 20 SP
SKS 20 IN SP
12
19
NPT 3/4“ -14
NPT 3/4“ -14
54,4
46,0
200
200
-
4
-40 to +110
-25 to +110
SKS 25 IN SP 25 NPT 1“ -11,5 64,3 200 4 -25 to +110
Accessories:
SKS ZUBS SP: Dust protection for coupling connector for SKM...SP
Accessories:
SKS ZUBS SP: Dust protection for coupling connector for SKM...SP
Accessories:
SKS ZUBS SP: Dust protection for coupling connector for SKM...SP
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 04 IR SN 72 5 G 1/8“ -28 345 4 -40 to +90
SKS 06 IR SN 72 6 G 1/4“ -19 500 4 -25 to +90
SKS 10 IR SN 72 10 G 3/8“ -19 250 4 -25 to +90
SKS 13 IR SN 72
SKS 20 IR SN 72
12
19
G 1/2“ -14
G 3/4“ -14
250
250
4
4
-25 to +90
-25 to +90
6
SKS 25 IR SN 72 25 G 1“ -11 200 4 -25 to +90
Accessories:
SKS ZUBS SN 72: Dust protection for coupling connector for SKS...SN 72
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 06 IR SN H 6 G 1/4“ -19 450 2 -40 to +90
SKS 10 IR SN H 10 G 3/8“ -19 310 2 -40 to +90
SKS 13 IR SN H 12 G 1/2“ -14 280 2 -40 to +90
6 SKS 20 IR SN H
SKS 25 IR SN H
19
25
G 3/4“ -14
G 1“ -11
245
140
2
2
-40 to +90
-40 to +90
SKS 32 IR SN H 31 G 1.1/4“ -11 125 2 -40 to +90
SKS 40 IR SN H 38 G 1.1/2“ -11 105 2 -40 to +90
SKS 50 IR SN H 51 G 2“ -11 105 2 -40 to +90
SKS 65 IR SN H 65 G 2.1/2“ -11 70 2 -40 to +90
SKS 75 IR SN H 75 G 3“ -11 55 2 -40 to +90
Accessories:
SKS ZUBS SN H: Dust protection for coupling connector for SKS...SN H
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 06 IN SN H 6 NPT 1/4“ -18 450 2 -40 to +90
SKS 10 IN SN H 10 NPT 3/8“ -18 310 2 -40 to +90
SKS 13 IN SN H 12 NPT 1/2“ -14 280 2 -40 to +90
SKS 20 IN SN H
SKS 25 IN SN H
19
25
NPT 3/4“ -14
NPT 1“ -11,5
245
140
2
2
-40 to +90
-40 to +90
6
SKS 32 IN SN H 31 NPT 1.1/4“ -11,5 125 2 -40 to +90
SKS 40 IN SN H 38 NPT 1.1/2“ -11,5 105 2 -40 to +90
SKS 50 IN SN H 51 NPT 2“ -11,5 105 2 -40 to +90
SKS 65 IN SN H 65 NPT 2.1/2“ -8 70 2 -40 to +90
SKS 75 IN SN H 75 NPT 3“ -8 55 2 -40 to +90
Accessories:
SKS ZUBS SN H: Dust protection for coupling connector for SKS...SN H
Spare parts:
SKM ZUB FEDER: Spring for SKM ZUB 312
Accessories:
SK ZUB RING: Locking ring for quick release clip 313 + 314
Accessories:
SK ZUB RING: Locking ring for quick release clip 313 + 314
Locking ring for quick release clip 313 + 314 SK ZUB RING
suitable for: Quick release clips SKM ZUB 313 and SKM ZUB 314.
Material: NBR
6 SKM ZUBS 3 CB GE
SKM ZUBS 3 CB GR
3
3
yellow
green
Accessories:
SKM ZUB 3 MCLIP: Marking clips for SKM 3 CB
Designation DN Colour
mm
SKM ZUBS AE 04 6 red
SKM ZUBS AE 06 10 red
SKM ZUBS AE 08 12 red
SKM ZUBS AE 12
SKM ZUBS AE 16 AL
19
25
red
metallic
6
6 SKM ZUBS 20 SN 71
SKM ZUBS 25 SN 71
3/4“
1“
6 SKM ZUBS 20 SN H
SKM ZUBS 25 SN H
3/4“
1“
SKM ZUBS 32 SN H 1.1/4“
Designation DN Size
mm
SKM ZUBS SP 04 6 4
SKM ZUBS SP 06 10 6
SKM ZUBS SP 08 12 8
Designation DN
mm
SKM ZUBS T 06 6
SKM ZUBS T 10 10
SKM ZUBS T 13 12
6 SKM ZUBS T 20
SKM ZUBS T 25
19
25
Designation DN
mm
SKS ZUBS AE 04 6
SKS ZUBS AE 06 10
SKS ZUBS AE 08 12
SKS ZUBS AE 12
SKS ZUBS AE 16
19
25
6
Designation DN
mm
SKS ZUBS T 06 6
SKS ZUBS T 10 10
SKS ZUBS T 13 12
6 SKS ZUBS T 20
SKS ZUBS T 25
19
25
Designation DN Size
mm
SKS ZUBS SP 04 6 4
SKS ZUBS SP 06 10 6
SKS ZUBS SP 08 12 8
6 SKS ZUBS 20 SN 71
SKS ZUBS 25 SN 71
3/4“
1“
6 SKS ZUBS 20 SN H
SKS ZUBS 25 SN H
3/4“
1“
SKS ZUBS 32 SN H 1.1/4“
Designation d1 d2 S
mm mm mm
SKM ORING 1 12,00 16,5 2,25
SKM ORING 2 17,00 22,00 2,50
SKM ORING 3 99 20,29 25,53 2,62
SKM ORING 4
SKM ORING 5
29,60
35,00
34,40
40,00
2,40
2,50
6
Designation d1 d2 S
mm mm mm
SKM ORING 3 AE 20,22 27,28 3,53
Designation d1 d2 S
mm mm mm
SKM STUETZRING 1 12,2 15,8 1
SKM STUETZRING 2 17,7 21,5 1
SKM STUETZRING 3 20,6 26,7 1
SKM STUETZRING 4
SKM STUETZRING 5
30,0
34,8
33,5
38,8
1
1
6
Designation d1 d2 S
mm mm mm
SKM STUETZRING 3 AE 21,0 26,5 1
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IR F 10 G 3/8“ -19 250 4 -25 to +100
SKM 10 IR 13 F
SKM 13 IR F
10
12
G 1/2“ -14
G 1/2“ -14
250
250
4
4
-30 to +100
-25 to +100 6
SKM 16 IR 20 F 16 G 3/4“ -14 250 4 -25 to +100
SKM 16 IR 25 F 16 G 1“ -11 250 4 -25 to +100
SKM 20 IR 25 F 19 G 1“ -11 250 4 -25 to +100
Accessories:
SKM ZUBS FS: Dust protection for coupling sleeve for SKM...FS
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IN F 10 NPT 3/8“ -18 250 4 -25 to +100
6 SKM 10 IN 13 F
SKM 13 IN F
10
12
NPT 1/2“ -14
NPT 1/2“ -14
250
250
4
4
-25 to +100
-25 to +100
SKM 16 IN 20 F 16 NPT 3/4“ -14 250 4 -25 to +100
SKM 20 IN 25 F 19 NPT 1“ -11,5 250 4 -25 to +100
Accessories:
SKM ZUBS FS: Dust protection for coupling sleeve for SKM...FS
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKM 08 HL 2 FS 8 L 10 M 16 x 1,5 2 350 2,5 -20 to +100
SKM 10 HL 2 FS
SKM 10 HL 3 FS
10
10
L
L
12
12
M 18 x 1,5
M 18 x 1,5
2
3
350
250
2,5
4
-20 to +100
-20 to +100 6
SKM 13 HL 2 FS 12 L 15 M 22 x 1,5 2 250 4 -30 to +100
SKM 13 HL 3 FS 12 L 15 M 22 x 1,5 3 250 4 -30 to +100
Accessories:
SKM ZUBS FS: Dust protection for coupling sleeve for SKM...FS
Temperature for
Designation DN Series pipe Ø Connecting L Size OP* SF* mineral oil
mm mm thread mm bar coupled °C
SKMS 08 HL 2 FS 8 L 10 M 16 x 1,5 - 2 250 4 -30 to +100
6 SKMS 10 HL 2 FS
SKMS 10 HL 3 FS
10
10
L
L
12
12
M 18 x 1,5
M 18 x 1,5
-
-
2
3
250
330
-
3
-30 to +100
-20 to +100
SKMS 13 HL 2 FS 12 L 15 M 22 x 1,5 - 2 250 4 -30 to +100
SKMS 13 HL 3 FS 12 L 15 M 22 x 1,5 - 3 250 4 -30 to +100
Accessories:
SKM ZUBS FS: Dust protection for coupling sleeve for SKM...FS
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 06 IR 1 FS 6 G 1/4“ -19 1 300 4 -20 to +100
SKM 10 IR 2 FS
SKM 13 IR 2 FS
10
12
G 3/8“ -19
G 1/2“ -14
2
2
250
250
4
4
-30 to +100
-30 to +100 6
SKM 13 IR 3 FS 12 G 1/2“ -14 3 250 4 -30 to +100
SKM 20 IR 3 FS 19 G 3/4“ -14 3 250 4 -30 to +100
SKM 20 IR 4 FS 19 G 3/4“ -14 4 250 4 -20 to +100
SKM 25 IR 5 FS 25 G 1“ -11 5 250 4 -30 to +100
SKM 32 IR 6 FS 31 G 1.1/4“ -11 6 250 4 -20 to +100
SKM 40 IR 7 FS 38 G 1.1/2“ -11 7 200 4 -20 to +100
SKM 50 IR 8 FS 51 G 2“ -11 8 200 4 -20 to +100
Accessories:
SKM ZUBS FS: Dust protection for coupling sleeve for SKM...FS
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IJ 1 FS 10 UNF 9/16“ -18 1 300 4 -20 to +100
6 SKM 13 IJ 2 FS
SKM 16 IJ 3 FS
12
16
UNF 3/4“ -16
UNF 7/8“ -14
2
3
300
330
4
3
-20 to +100
-20 to +100
SKM 20 IJ 3 FS 19 UNF 1.1/16“ 3 250 4 -20 to +100
Accessories:
SKM ZUBS FS: Dust protection for coupling sleeve for SKM...FS
Ordering information: This item will shortly be dropped from the range.
Temperature for
Designation DN Size Connecting mineral oil
mm thread °C
SKM 06 IR FC 6 4 G 1/4“ -19 -
SKM 10 IR FC
SKM 13 IR FC
10
12
6
8
G 3/8“ -19
G 1/2“ -14
-
- 6
SKM 16 IR 20 FC 16 10 G 3/4“ -14 -
SKM 20 IR FC 19 12 G 3/4“ -14 -
Temperature for
Designation DN Connecting OP* SF* SW* mineral oil
mm thread bar coupled °C
SKM 06 IR SN 71-3 6 G 1/4“ -19 690 2 - -40 to +90
SKM 10 IR SN 71-3 10 G 3/8“ -19 690 2 - -40 to +90
SKM 13 IR SN 71-3 12 G 1/2“ -14 690 2 - -40 to +90
6 SKM 20 IR SN 71-3
SKM 25 IR SN 71-3
19
25
G 3/4“ -14
G 1“ -11
520
520
2
2
-
-
-40 to +90
-40 to +90
Accessories:
SKM ZUBS SN 71: Dust protection for coupling sleeve for SKM...SN 71
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKM 10 IR F SN 74 10 G 3/8“ -19 250 4 -40 to +90
SKM 13 IR F SN 74 12 G 1/2“ -14 250 4 -40 to +90
Accessories:
SKM ZUBS F SN 74: Dust protection for coupling sleeve for SKM...SN 74
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IR F 10 G 3/8“ -19 250 4 -25 to +100
SKS 10 IR 13 F 10 G 1/2“ -14 250 4 -25 to +100
SKS 13 IR F 12 G 1/2“ -14 250 4 -25 to +100
6 SKS 16 IR 20 F
SKS 16 IR 25 F
16
16
G 3/4“ -14
G 1“ -11
250
250
4
4
-25 to +100
-25 to +100
SKS 20 IR 25 F 19 G 1“ -11 250 4 -25 to +100
Accessories:
SKS ZUBS FS: Dust protection for coupling connector for SKS...FS
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IN F 10 NPT 3/8“ -18 250 4 -25 to +100
SKS 10 IN 13 F 10 NPT 1/2“ -14 250 4 -25 to +125
SKS 13 IN F 12 NPT 1/2“ -14 250 4 -25 to +100
SKS 16 IN 20 F
SKS 20 IN 25 F
16
19
NPT 3/4“ -14
NPT 1“ -11,5
250
250
4
4
-25 to +100
-25 to +100
6
Accessories:
SKS ZUBS FS: Dust protection for coupling connector for SKS...FS
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKS 08 HL 2 FS 8 L 10 M 16 x 1,5 2 350 2,5 -20 to +100
6 SKS 10 HL 2 FS
SKS 10 HL 2 FS ED
10
10
L
L
12
12
M 18 x 1,5
M 18 x 1,5 *
2
2
250
350
4
2,5
-30 to +100
-20 to +100
SKS 10 HL 3 FS 10 L 12 M 18 x 1,5 3 250 4 -30 to +100
SKS 13 HL 2 FS 12 L 15 M 22 x 1,5 2 250 4 -30 to +100
SKS 13 HL 3 FS 12 L 15 M 22 x 1,5 3 250 4 -30 to +100
Accessories:
SKS ZUBS FS: Dust protection for coupling connector for SKS...FS
Temperature for
Designation DN Series pipe Ø Connecting Size OP* SF* mineral oil
mm mm thread bar coupled °C
SKSS 08 HL 2 FS 8 L 10 M 16 x 1,5 2 250 4 -30 to +100
SKSS 10 HL 2 FS
SKSS 10 HL 3 FS
10
10
L
L
12
12
M 18 x 1,5
M 18 x 1,5
2
3
250
330
4
3
-30 to +100
-20 to +100 6
SKSS 13 HL 2 FS 12 L 15 M 22 x 1,5 2 350 2,5 -20 to +100
SKSS 13 HL 3 FS 12 L 15 M 22 x 1,5 3 330 3 -20 to +100
Accessories:
SKS ZUBS FS: Dust protection for coupling connector for SKS...FS
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKS 06 IR 1 FS 6 G 1/4“ -19 1 300 4 -30 to +100
6 SKS 10 IR 2 FS
SKS 13 IR 2 FS
10
12
G 3/8“ -19
G 1/2“ -14
2
2
250
250
4
4
-30 to +100
-30 to +100
SKS 13 IR 3 FS 12 G 1/2“ -14 3 250 4 -30 to +100
SKS 20 IR 3 FS 19 G 3/4“ -14 3 250 4 -30 to +100
SKS 20 IR 4 FS 19 G 3/4“ -14 4 250 4 -30 to +100
SKS 25 IR 5 FS 25 G 1“ -11 5 250 4 -30 to +100
SKS 32 IR 6 FS 31 G 1.1/4“ -11 6 250 4 -20 to +100
SKS 40 IR 7 FS 38 G 1.1/2“ -11 7 200 4 -20 to +100
SKS 50 IR 8 FS 51 G 2“ -11 8 200 4 -20 to +100
Accessories:
SKS ZUBS FS: Dust protection for coupling connector for SKS...FS
Temperature for
Designation DN Connecting Size OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IJ 1 FS 10 UNF 9/16“ -18 1 300 4 -20 to +100
SKS 13 IJ 2 FS
SKS 16 IJ 3 FS
12
16
UNF 3/4“ -16
UNF 7/8“ -14
2
3
300
330
4
3
-20 to +100
-20 to +100 6
SKS 20 IJ 3 FS 19 UNF 1.1/16“ 3 250 4 -20 to +100
Accessories:
SKS ZUBS FS: Dust protection for coupling connector for SKS...FS
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 06 IR SN 71-3 6 G 1/4“ -19 690 2 -40 to +90
SKS 10 IR SN 71-3 10 G 3/8“ -19 690 2 -40 to +90
SKS 13 IR SN 71-3 12 G 1/2“ -14 690 2 -40 to +90
6 SKS 20 IR SN 71-3
SKS 25 IR SN 71-3
19
25
G 3/4“ -14
G 1“ -11
520
520
2
2
-40 to +90
-40 to +90
Accessories:
SKS ZUBS SN 71: Dust protection for coupling connector for SKS...SN 71
Temperature for
Designation DN Connecting OP* SF* mineral oil
mm thread bar coupled °C
SKS 10 IR F SN 74 10 G 3/8“ -19 250 4 -40 to +90
SKS 13 IR F SN 74 12 G 1/2“ -14 250 4 -40 to +90
Accessories:
SKS ZUBS F SN 74: Dust protection for coupling connector for SKS...SN 74
Designation Size
SKM ZUBS 1 FS 1
SKM ZUBS 2 FS 2
SKM ZUBS 3 FS 3
6 SKM ZUBS 4 FS
SKM ZUBS 5 FS
4
5
Designation Size
SKS ZUBS 1 FS 1
SKS ZUBS 2 FS 2
SKS ZUBS 3 FS 3
6 SKS ZUBS 4 FS
SKS ZUBS 5 FS
4
5
6 TKM 13 MV 10 HB
TKM 19 MV 13 HB
10
12
G 3/8“ -19
G 1/2“ -14
13
19
22
30
15
15
3
3
-15 to +150
-15 to +150
TKM 19 MV 20 HB 19 G 3/4“ -14 19 30 15 3 -15 to +150
6 TKM 13 MV 13 MM
TKM 19 MV 19 MM
12
19
13
19
13
19
15
15
3
3
-15 to +150
-15 to +150
6 TKM 13 MV 13 MM 90
TKM 19 MV 19 MM 90
12
19
13
19
13
19
15
15
3
3
-15 to +150
-15 to +150
6 TKM 13 OV 13 MM
TKM 19 OV 19 MM
12
19
13
19
13
19
15
15
3
3
-15 to +150
-15 to +150
6 TKM 13 OV 13 MM 90
TKM 19 OV 19 MM 90
12
19
9
19
13
19
15
15
3
3
-15 to +150
-15 to +150
6 TKM 13 OV 13 MM ND
TKM 19 OV 16 MM ND
12
16
13
16
13
19
15
15
3
3
-15 to +150
-15 to +150
TKM 19 OV 19 MM ND 19 19 19 15 3 -15 to +150
Connector Temperature fo
Designation DN Connecting dimension SW* OP* SF* mineral oil
mm thread mm mm bar coupled °C
TKS 09 MV 06 HB 6 G 1/4“ -19 9 15 15 3 -15 to +150
TKS 13 MV 10 HB 10 G 3/8“ -19 13 17 15 3 -15 to +150
TKS 19 MV 20 HB 19 G 3/4“ -14 19 27 15 3 -15 to +150
Connector Temperature fo
Designation DN Connecting dimension SW* OP* SF* mineral oil
mm thread mm mm bar coupled °C
TKS 13 MV 08 H 8 M 16 x 1,5 13 17 15 3 -15 to +150
Connector Temperature fo
Designation DN Connecting dimension SW* OP* SF* mineral oil
mm thread mm mm bar coupled °C
TKS 09 OV 02 HB 2 G 1/8“ -28 9 11 15 3 -15 to +150
TKS 09 OV 06 HB 6 G 1/4“ -19 9 15 15 3 -15 to +150
TKS 09 OV 10 HB 10 G 3/8“ -19 9 17 15 3 -15 to +150
TKS 13 OV 06 HB
TKS 13 OV 10 HB
6
10
G 1/4“ -19
G 3/8“ -19
13
13
15
17
15
15
3
3
-15 to +150
-15 to +150
6
TKS 13 OV 13 HB 12 G 1/2“ -14 13 22 15 3 -15 to +150
TKS 19 OV 13 HB 12 G 1/2“ -14 19 22 15 3 -15 to +150
TKS 19 OV 20 HB 19 G 3/4“ -14 19 27 15 3 -15 to +150
Connector Temperature fo
Designation DN Connecting dimension SW* OP* SF* mineral oil
mm thread mm mm bar coupled °C
TKS 09 OV 02 HBK 90 2 R 1/8“ K 9 15 15 3 -15 to +150
TKS 09 OV 06 HBK 90 6 R 1/4“ K 9 15 15 3 -15 to +150
TKS 09 OV 10 HBK 90 10 R 3/8“ K 9 17 15 3 -15 to +150
Connector Temperature fo
Designation DN Connecting dimension SW* OP* SF* mineral oil
mm thread mm mm bar coupled °C
TKS 09 OV 02 H 2 M 10 x 1 9 11 15 3 -15 to +150
TKS 09 OV 06 H 6 M 14 x 1,5 9 15 15 3 -15 to +150
TKS 13 OV 02 H 2 M 10 x 1 13 15 15 3 -15 to +150
TKS 13 OV 06 H
TKS 13 OV 08 H
6
8
M 14 x 1,5
M 16 x 1,5
13
13
15
17
15
15
3
3
-15 to +150
-15 to +150
6
Connector Temperature fo
Designation DN Connecting dimension SW* OP* SF* mineral oil
mm thread mm mm bar coupled °C
TKS 09 OV 02 HK 90 2 M 10 x 1 9 15 15 3 -15 to +150
TKS 09 OV 06 HK 90 6 M 14 x 1,5 9 15 15 3 -15 to +150
TKS 13 OV 06 HK 90 6 M 14 x 1,5 13 17 15 3 -15 to +150
6 TKS 13 OV 13 MM
TKS 19 OV 13 MM
12
12
13
13
13
19
15
15
3
3
-15 to +150
-15 to +150
TKS 19 OV 19 MM 19 19 19 15 3 -15 to +150
Safety engineering
All the information in this catalogue is based on the standards applicable at the time of publication and the regu-
lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly
instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety
of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our
products are constantly being updated, technical modifications are possible.
While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions
and accept no liability for the information it contains.
Designation Internal Ø
mm
TGF ISO 17 17
TGF ISO 20 20
TGF ISO 23 23
TGF ISO 25 25
7 TGF ISO 27
TGF ISO 31
27
31
TGF ISO 33 33
TGF ISO 36 36
TGF ISO 40 40
TGF ISO 44 44
TGF ISO 47 47
TGF ISO 53 53
TGF ISO 55 55
TGF ISO 60 60
TGF ISO 66 66
TGF ISO 73 73
TGF ISO 93 93
TGF ISO 112 112
TGF ISO 127 127
Designation Internal Ø
mm
TGF ISO K 050 50
TGF ISO K 075 75
TGF ISO K 100 100
TGF ISO K 125 125
TGF ISO K 150
TGF ISO K 175
150
175
7
TGF ISO K 200 200
Index
A HDB 400 - 4 SP 62
AFH 100 515 HF 100 - 1 SN 56
AKF HL / AKF HS 525 HF 200 - 2 SN 57
AKF ZUB FEDER 529 HM 101
AKF ZUB GEHAEUSE 527 HW 100 - 1 SN 58
AKF ZUB HUELSE 530 HW 200 - 2 SN 59
AKL HL / AKL HS 526
AKL ZUB BLINDSTUTZEN 531 K
AKL ZUB DOSE 528 KANA AB 494
AKL ZUB KONTERMUTTER 532 KANA HB 493
AKM HL ME 524 KOMP 116
AKM IM ME 523 KP 100 - 1 SC 41
AUTOGEN-ZWILLING 113 KP 100 P - 1 SC 42
AUTOGEN BLAU 111 KP 200 - 2 SC 43
AUTOGEN ROT 112 KP 200 NO - 2 SC 45
KP 200 PRO - 2 SC 44
B KUEHLER 117
BFH 200 516
BREMS 108 M
MD 100 63
D
DAMPF B 109 N
ND 100 68
A E ND 300 69
Ersatzklinge TS 122 ND 300 T 70
ND A 394
F ND AB 382
FBS 128 ND AB 45 383
FBSB 129 ND AB 90 384
FBSS 130 ND AFL 386
FP 104 110 ND AFL 45 387
ND AFL 90 388
G ND AFL K 45 389
GKS 125 ND AFL K 90 390
ND AJ 404
H ND AJ 90 405
HD 100 - 1 SN 46 ND AJF 401
HD 100 T - 1 SN 47 ND AJF 45 402
HD 200 - 2 SN 48 ND AJF 90 403
HD 200 RM - 2 SN 60 ND AOL 391
HD 200 S - 2 SN 50 ND AOL 45 392
HD 200 T - 2 SN 49 ND AOL 90 393
HD 400 - 4 SP 51 ND ASA 406
HD 500 - 4 SH 52 ND B 396
HD 600 - R 13 53 ND BD 397
HD 700 - R 15 54 ND FL / ND FS 398
HD 700 PRO 55 ND HB 381
HDB 200 - 2 ST 61 ND HBK 379
SKS IR AE 637 T
SKS IR ARG 640 TAF 100 79
SKS IR F 690 TAF 100 CU 81
SKS IR FS 694 TAFZ 100 80
SKS IR F SN 74 697 TAFZ 100 CU 82
SKS IR HC 642 TBF 200 83
SKS IR MC 644 TBF 200 CU 85
SKS IR SN 71-3 696 TBFZ 200 84
SKS IR SN 72 649 TBFZ 200 CU 86
SKS IR SN H 650 TE 100 - 1 TE 64
SKS IR SP 645 TE 200 - 2 TE 65
SKS IR SP KE 647 TE 200 B - 2 TE 66
SKS IR T 636 TE 300 - 3 TE 67
SKSS HL / SKSS HS 630 TECALANSCHERE 121
SKSS HL FS 693 TF 100 106
SKSS HL UDK / SKSS HS UDK 632 TF 200 107
SKS ZUB 3 670 TGF Band 140
SKS ZUBS 669 TGF ISO 764
SKS ZUBS AE 671 TGF ISO mit Klettverschluss 765
SKS ZUBS FS 700 TG S 115
SKS ZUBS F SN 74 701 TKM MV H 707
SKS ZUBS SN 71 674 TKM MV H 45 708
SKS ZUBS SN 72 675 TKM MV H 90 709
A SKS ZUBS SN H 676 TKM MV HB 704
SKS ZUBS SP 673 TKM MV HB 45 705
SKS ZUBS T 672 TKM MV HB 90 706
SK ZUB 01 RO 578, 588 TKM MV HB KAF 703
SK ZUB 04 RO 599, 604 TKM MV IR 702
SK ZUB 12 RO 595, 600 TKM MV MM 710
SK ZUB 13 RO 596, 601 TKM MV MM 45 711
SK ZUB 14 RO 597, 602 TKM MV MM 45 ND 714
SK ZUB 15 RO 598, 603 TKM MV MM 90 712
SK ZUB GEHAEUSE 538 TKM MV MM 90 ND 715
SK ZUB RING 658 TKM MV MM ND 713
SSF 133 TKM OV H 720
SSK 131 TKM OV H 45 721
SSK C 132 TKM OV H 90 722
SSR 134 TKM OV HB 717
SSR E 135 TKM OV HB 45 718
SST 138 TKM OV HB 90 719
SSTK 139 TKM OV IR 716
STOP FS 761 TKM OV MM 724
STOP ROV 762 TKM OV MM 45 725
STOP SAE 763 TKM OV MM 45 ND 729
SUEM L 152 TKM OV MM 90 726
SUEM R 151 TKM OV MM 90 ND 730
TKM OV MM KAF 723
TKM OV MM KAF ND 727
HYDRAULIC
COMPONENTS
CATALOGUE 2 (en/de) CATALOGUE 3 (de) CATALOGUE (en/de)
Soldered
connection parts Messtechnik Valves
Flanges Accessories
Measuring technology,
pressure gauge fittings Measuring instruments
info@hansa-flex.com · www.hansa-flex.com
CATALOGUE 1 . 02/2008 . 10.000
www.hansa-flex.com
info@hansa-flex.com