Professional Documents
Culture Documents
Coverage Adhesion
RESICHEM 563 Apply the mixed material onto the The material will adhere to most
SILTHERM 250 prepared surface by brush or
squeegee using a practical
surfaces. For steel and other
metallic surfaces optimal
Resichem 563 Siltherm 250 coverage rate of 0.85 sq metres performance will be achieved on
is a highly flexible single per litre per 1000 micron coat. an angular abrasive blasted
component low thermal Up to 3 mm can be applied in a surface with a minimum blast
conductivity coating designed for single coat dependent on profile of 75 microns.
use on hot and cold surfaces. In temperature. Subsequent coats
addition, the coating provides long can be applied at any time after All surfaces must be cleaned and
term protection against corrosion the initial layer has cured. coated with Resichem 589
under insulation (CUI). Operating Adhesion Promoter, this primer
temperature ranges from –600C to Cure Temperatures layer must be applied thinly on
2500C (dry). -4 to +800C the prepared surface and allowed
to dry for 20 minutes prior to
Typical applications Cure Times over-coating.
The coating of hot or cold Cure times will be primarily
Adhesive failure will be cohesive
pipework, tanks and process affected by temperature and
within the Resichem 563.
vessels to provide corrosion humidity.
protection, thermal insulation, or
safety properties. The material will cure down to
minus 40C overnight and will
Characteristics increase in cure rate the higher
the temperature and humidity.
Appearance
Grey thixotropic liquid 20˚C 65% Humidity
2mm wet film thickness
Mixing Ratio 1hour
No mixing required – single 30˚C 85% Humidity
component material. 2mm wet film thickness
30mins
Density
0.5g/cc Note: the material will cure from
the surface so being touch dry is
Volume capacity not indicative of through cure.
2 litres /Kg
Storage life
Solids content 12 months if unopened and stored
96.5% in normal dry conditions (15-30°C)
Resimac
[Type text]Ltd, Unit B, Park Barn Estate, Station Road, Topcliffe, Thirsk, YO7 3SE, United Kingdom
Tel: +44 1845 577498 Email: info@resimac.co.uk Web: www.resimacsolutions.com
563151105
Product Specification
Resimac
[Type text]Ltd, Unit B, Park Barn Estate, Station Road, Topcliffe, Thirsk, YO7 3SE, United Kingdom
Tel: +44 1845 577498 Email: info@resimac.co.uk Web: www.resimacsolutions.com
563151105