You are on page 1of 24

TECH-4.

06 10K ES DUAL LRG BOOST


Technical Manual

4.06”, 10,000 PSI WORKING PRESSURE, 3,000 PSI HYDRAULICS,


ES SERIES DUAL COMBI BLOW OUT PREVENTER W/LARGE BOOSTER

Document Number Rev


M60ES44-NX449L-MAN-001 05

This document contains proprietary and confidential information which


belongs to National Oilwell Varco, L.P., its affiliates or subsidiaries (all
collectively referred to hereinafter as “NOV”). It is loaned for limited purposes
only and remains the property of NOV. Reproduction, in whole or in part, or
use of this design or distribution of this information to others is not permitted
without the express written consent of NOV. This document is to be returned
to NOV upon request and in any event upon completion of the use for which
it was loaned. This document and the information contained and represented
herein is the copyrighted property of NOV. ©National Oilwell Varco

TEXAS OIL TOOLS


3770 Pollok Dr.
Conroe, TX 77303
T: 936.777.6100
E: totsales@nov.com
nov.com/tot
M60ES44-NX449L-MAN-001
Rev 05

Revision History

Rev Date Reason for Issue Prepared Checked Approved


25/Sep/2015 Initial Release CP MD KM
01
N/A
07/Mar/2017 Revision - 3300 CP MD KM
02
Lock screws to ES4R-VT ram assemblies; Update ES4R-VTXX-ART-001; Add lock screw torque; New cover/header/TOC
29/Nov/2017 Revision - 3300 CP JTM TB
03
Revise Shear/Seal Ram Assemblies
2018-08-06 Revision CP TB TW
04
Doc # header; Bonnet bolt torque
2018-10-01 Revision CP TB TW
05
Bonnet Bolts to 200- 500 ft.lbs.

totsales@nov.com nov.com/tot i
M60ES44-NX449L-MAN-001
Rev 05

Table of Contents
1 Introduction ................................................................................................................................................ 1
2 Features ...................................................................................................................................................... 1
3 Certification ................................................................................................................................................ 1
4 Operation.................................................................................................................................................... 2
5 Recommended Maintenance Program ........................................................................................................ 3
6 Field Testing ................................................................................................................................................ 3
7 Specifications .............................................................................................................................................. 4
8 M60ES44-NX449L........................................................................................................................................ 6
9 M60ES46-ACT4X ......................................................................................................................................... 7
10 9905-2003XL ............................................................................................................................................. 10
11 *EQ10-0001* ............................................................................................................................................ 13
12 ES4R-*S**** ............................................................................................................................................. 18
13 ES4R-VT**** - 4.06" Pipe Slip Ram Assemblies ......................................................................................... 20

totsales@nov.com nov.com/tot ii
M60ES44-NX449L-MAN-001
Rev 05

1 Introduction

The 4.06" 10K ES BOP is designed for coiled tubing and snubbing operations. The ES is the lightest in the industry, yet
retains all the field-proven designs you have come to expect from Texas Oil Tools.

The compact size allows easier handling along with easier maintenance. All actuators feature power hydraulic ram
change, low bonnet bolt torque requirement, and a pressure balance piston. For shear operations.

Internally ported hydraulics (no external plumbing) eliminates the making and breaking of oil seals when changing or
servicing rams; thus removing the possibility of environmental pollution.

2 Features

 Light and Compact


 Pressure Balance Piston
 Low Bonnet Bolt Torque
 Internal Equalizing Valves
 Well Pressure Isolated Seals
 Hydraulic Ram Change
 Internal Porting
 Independent Bonnet Testing
 No Welds - Solid Body
 Ram Position Indicator
 Manual Locks
 Rams - Shear/Seal, Pipe/Slip

3 Certification

- Testing -All BOPs are hydrostatic and function tested per API 6A (ISO 10423).

H2S Service - Materials in contact with pressured well fluids conform to NACE Specification MR-01-75 for H2S Service.

Arctic Service - In addition to the NACE Specifications above meets the API 6A with Charpy Impacts at -50°F.

North Sea Service -25°F - In addition to the NACE Specification s and API requirements additional Charpy Impact and
NDE are carried out. A Design Review and Certificate of Compliance by DNV, Lloyds, or Bureau Veritas are furnished
with the Data Book.

totsales@nov.com nov.com/tot Page 1 of 21


M60ES44-NX449L-MAN-001
Rev 05

4 Operation

Ram Open and Close - Before opening the rams be sure the lock screws are backed fully out (turn counter clockwise).
If lock screws do not turn out easily after a closed and locked wellbore pressure test apply 1,500 to 3,000 psi hydraulic
pressure to the "CLOSE" hydraulic port to relieve the load from the end of the tail rod.

To open the rams apply 1,500 psi hydraulic pressure to the body port marked "OPEN". Close the rams by applying 1,500
to 3,000 psi hydraulic pressure to the body port marked "CLOSE".

Bonnet Open and Close - Remove the bonnet bolts (22).

To open the bonnets apply 500 to 1,500 psi hydraulic pressure to the body port marked "CLOSE" (ram close). To closethe
bonnets apply 1,500 psi operating pressure to the body port marked "OPEN" (ram open). After closing the bonnets
maintain the 1,500 psi hydraulic pressure to keep the bonnet pulled tightly against the body as the bonnet bolts are
reinstalled.

Ram Change - Vent all hydraulic pressure to zero.

Remove the bonnet bolts and open the bonnets as described above. Maintain hydraulic pressure until the bonnets have
fully retracted and the rams have fully extended making them accessible. Vent all hydraulic pressure to zero to prevent
personal injury in the event that the bonnet is closed prematurely during the ram change procedure. As an added safety
precaution install the ram change rod covers (9601-3036) to prevent the accidental closure of the bonnets as well as to
prevent damage to the ram change rods.

Remove the ram by lifting up and over the ram change rod. NOTE: Do not scratch ram change rods.

Front and rear seals may be replaced without fully removing the rams. Lift the ram up until it clears the ram guide rod
and rotate slightly to gain access to the front seal.

totsales@nov.com nov.com/tot Page 2 of 21


M60ES44-NX449L-MAN-001
Rev 05

5 Recommended Maintenance Program

After Each Job - Inspect Ram Rubber Seals

Normal wear will be a moderate amount of extrusion downstream of the pressured side.

Replace the ram seals when usage has resulted in any noticeable loss of rubber. Field testing only to the maximum
anticipated well pressure will extend the life of the seals.

Inspect Bonnet Seal - Any extrusion indicates improper tightening of the bonnet bolts. Extrusion all around the o-ring
indicates even, but inadequate tightening of the bonnet nuts. Extrusion over only a part of the o-ring indicates uneven
tightening of the bonnet bolts. Replace if any extrusion is evident.

Check cutting edges of the shear or shear seal inserts. If the blade is chipped then the cutting action of the insert may
be impaired and therefore it should be discarded.

Check the teeth of the slip inserts. If the slip teeth are blunt or dulled then the gripping action of the ram may be
impaired and therefore the slips should be discarded.

Always store and operate the BOP with the equalizing valve closed.

After 20 Jobs or 12 Months Maximum - Completely disassemble the equalizing valve, replace all seals and worn parts.

Completely disassemble and inspect the bonnet assemblies. Replace all seals and worn parts.

Inspect all threads, connections, bushings and fittings. Replace and repair as required.

6 Field Testing
Function Test Bonnets - All actuators should be pressure tested to 3,000 psi working pressure in both the ram open
and ram close positions. A minimum hold time of 15 minutes is required without leakage.

Check the manual lock system when in the ram closed position.

Function Tests Shear Seal Ram and Blind Seal Tests - The shear seal rams and the blind rams seal should be closed
using 1,500 psi hydraulic pressure and pressure tested separately to 15,000 psi from below. The test medium should
be water with a rust inhibitor.

Function Test Slip Ram with Pipe Ram Seal Test - The slip rams should be closed around a suitable diameter test bar,
using 1,500 psi hydraulic pressure. The pipe rams should then be closed using 1,500 psi hydraulic pressure and pressure
tested to 15,000 psi from below. A minimum hold time of 15 minutes is required without leakage. The test medium
should be water with a rust inhibitor.

totsales@nov.com nov.com/tot Page 3 of 21


M60ES44-NX449L-MAN-001
Rev 05

7 Specifications
PHYSICAL CHARACTERISTICS
Overall Height 31.76” (807mm)
Length 75.40” (1915 mm)
Width 14.47” (368mm)
Approximate Weights
M60ES44-NX44 – 4.06” 10K ES46 Dual Combi 2,200lbs. ( 998kg)
Vertical Bore 4.06” (103.12 mm)
Connections
 Lower Connection 4.06” 10K OPEN FLANGE WITH API BX-155
 Upper Connection 4.06” 10K STUDDED WITH API BX-155
 1 Side Outlets 2.06” 10K API BX-152
 Hydraulic Connections #12 SAE
Hydraulic Swept Volumes (per actuator pair)
M60ES46-ACT4X - Shear/Seal Actuator Assembly
 Open 396 in3 (6.49 L)
 Close 396 in3 (6.49 L)
9905-2003XL – Pipe/Slip Actuator Assembly
 Open 94.8 in3 (1.55 L)
 Close 94.8 in3 (1.55 L)
Hydraulics/Wellbore Ratio
M60ES46-ACT4X - Shear/Seal Actuator, Large Booster 25.82
9905-2003XL – Pipe/Slip Actuator Assembly 12.27
OPERATIONAL CHARACTERISTICS
Hydrostatic Working Pressure 10,000 psi (690 bar)
Hydraulic Working Pressure 3,000 psi (207 bar)
Service Compatibility H2S NACE MR-01-75

totsales@nov.com nov.com/tot Page 4 of 21


M60ES44-NX449L-MAN-001
Rev 05

FASTENER TORQUE REQUIREMENTS


M60ES46-ACT4X - Shear/Seal Actuator Assembly
TORQUE RECOMMENDED
ITEM PART NUMBER DESCRIPTION THREAD ACTUAL TORQUE
PATTERN TORQUE VALUE
17 9905-1487G SHCS .875-9UNC 6 Bolt 200 ft.lbs.
23 9905-2937B Bonnet Bolt 1.875-8UN 4 Bolt 200-500 ft.lbs.
20 9905-2938 SHCS .500-13UNC N/A 50 ft.lbs.
22 9905-2936 Guide Rod .500-13UNC N/A 50 ft.lbs.
9905-2003XL - Pipe/Slip Actuator Assembly
11 9905-2834B Bonnet Bolt 1.875-8UN 4 Bolt 200-500 ft.lbs.
14 9905-2424 Guide Rod .500-13UNC N/A 50 ft.lbs.
19 7935-1018G SHCS .625-11UNC 6 Bolt 60 ft.lbs.
20 9905-1242G SHCS .750-10UNC 6 Bolt 100ft.lbs.

ACTUATOR TORQUE SEQUENCES

totsales@nov.com nov.com/tot Page 5 of 21


M60ES44-NX449L-MAN-001
Rev 05

8 M60ES44-NX449L
4.06, 10K DUAL COMBI BOP SHEAR/SEAL PIPE/SLIP W/ LARGE BOOSTER
Reference Drawing M60ES44-NX449L-ART-001

M60ES44-NX449L
4.06, 10K DUAL COMBI BOP SHEAR/SEAL PIPE/SLIP
Reference Drawing M60ES44-NX449L-ART-001

ITEM PART NO. QTY. DESCRIPTION


1 2006-2000B 1 BODY
2 M60ES46-ACT4X 2 SHEAR/SEAL ACTUATOR LARGE BOOSTER
3 9905-2003XL 2 PIPE/SLIP ACTUATOR
4 EQ10-0001X 2 EQUALIZING VALVE ASSEMBLY 10K
5 ES46-SNG2 1 CONNECTOR GUARD ASSEMBLY
6 7933-4155 2 GASKET RING API BX-155
7 7949-1864B 8 STUD 1.125-8UN
8 P601004731B 8 STUD TAP END 1.125-8UN
9 7937-0818B 24 NUT 1.125-8UN
10 P601004717B 8 STUD TAP END .750-10UN
11 7937-0512B 8 NUT .750-10UN
12 2000-FP44 1 FLANGE PROTECTOR
13 7934-9094R 1 PLUG .562 AE
14 EH44-NTAG 1 TAG KIT DUAL COMBI
15 7934-0513 4 ADAPTER #12 SAE

M60ES44-NX449L-ART-001

totsales@nov.com nov.com/tot Page 6 of 21


M60ES44-NX449L-MAN-001
Rev 05

9 M60ES46-ACT4X
4.06 10K ES SHEAR/SEAL ACTUATOR ASSEMBLY
Reference Drawing M60ES46-ACT4X-ASM-001

Disassembly - Open the bonnets per 4.0 Operation and vent all hydraulic pressure to zero. Remove rams; remove
bonnet seal (1-11 & 1-14). Remove socket head cap screws (17) and end cap (10) from cylinder (3). Remove socket
head cap screw (20) and remove slide (14) from end cap (10). Remove retainer (1-9) from lock screw (15) and remove
lock screw (15) from slide (14). Remove BHCS (21) and remove leaf spring (16) from slide (14).

Remove retainer (1-5) and seal (1-4) from end cap (10). Remove secondary rod (9) from main piston (5), and secondary
piston (6). Remove T-seals (1-8 & 1-13). Remove secondary cylinder (4), main cylinder (3), and change cylinders (13).
Remove O-rings (1-1, 1-3, 1-10), retainer (1-5) and seal (1-4) from secondary cylinder (4). Remove ram guide (8), and
guide (22). Remove main rod (7) from main piston (5).

Support the weight of bonnet (2) and remove ram change rod (11 & 12) from body with Allen wrench. CAUTION: Do
not scratch surfaces of ram change rods. NOTE: Specific location of change rods as they have differing thread sizes.
Remove O-rings (1-1) from body.

Remove ram change rods (11 & 12) from bonnet (2). Remove T-seals (1-7) from ram change rods (11 & 12). Remove
O-rings (1-3 & 1-10), seals (1-4) and retainers (1-5) from bonnet (2). Remove bushings (18) and seals (1-2) from bonnet
(2). Clean and inspect all parts for wear before reassembly.

Assembly - Typical reverse order of disassembly.

M60ES46-ACT4X
4.06” 10K SHEAR/SEAL ACTUATOR ASSEMBLY
Reference Drawing M60ES46-ACT4X-ASM-001

ITEM PART NO. QTY. DESCRIPTION


1 M60ES46-SK09* 1 SEALS KIT
2 9905-2921B 1 BONNET, SHEAR/SEAL 4.06 15M ES B
3 9905-2922B 1 MAIN CYL, SHEAR/SEAL, 4.06 15M E
4 M601012030B 1 SECONDARY CYL, S/S 4.06 15M LG B
5 9905-2924B 1 MAIN PISTON, SHEAR/SEAL 4.06 15M
6 M601012031B 1 SECONDARY PISTN, S/S 4.06 15M LG
7 M601013104B 1 MAIN ROD, ES46 S/S ACT MP35N
8 2001-0025B 1 RAM GUIDE PIPE - SLIP - SHEAR/SE
9 9905-2927B 1 SECONDARY ROD, SHEAR/SEAL 4.06 1
10 M601012029B 1 CAP, S/S, 4.06 15M, LRG BSTR
11 9905-2929B 1 CHANGE ROD, OPEN, SHEAR/SEAL
12 9905-2931B 1 CHANGE ROD,SHEAR/SEAL, CLOSE
13 9905-2932B 2 CHANGE CYLINDER, SHEAR/SEAL 4.06
14 9905-2933B 1 SLIDE, SHEAR/SEAL 4.06 15M ES BO
15 9905-2934B 1 LOCK SCREW, SHEAR/SEAL 4.06 15M
16 9905-2935 1 LEAF SPRING, SHEAR/SEAL 4.06 15M

totsales@nov.com nov.com/tot Page 7 of 21


M60ES44-NX449L-MAN-001
Rev 05

17 9905-1487G 6 SHCS, .875-9UNC X 20.80 LONG


18 9905-2835 2 BUSHING: CHANGE PISTON, ES BOP
19 7934-0202 5 PLUG SKT #2 .313 24UNF-2B
20 9905-2938 1 SHCS, SLIDE LOCK, S/S, 4.06 15M
21 7943-0402 1 SCREW CAP BUTTONHEAD .250 20UNC
22 9905-2936 1 GUIDE, SHEAR/SEAL RAM, 4.06 15M
23 9905-2937B 4 BOLT, BONNET, SHEAR/SEAL ACTUATO

M60ES46-SK09*
SEALS KIT F/ SHEAR/SEAL ACTUATOR
Reference Drawing M60ES46-ACT4X-ASM-001

M60ES46-SK04 M60ES46-SK09B
ITEM QTY DESCRIPTION
H2S -25°F (-32°C) H2S -50°F (-45.5°C)
1-1 7813-3220 7813-A220 4 O-RING 90 NITRILE
1-2 7820-1371 7820-1371B 4 SEAL MOLYTHANE
1-3 7813-3225 7813-A225 4 O-RING 90 NITRILE
1-4 7821-1379 7821-1379B 5 SEAL POLYMYTE
1-5 7826-1756 7826-1756 4 RETAINER RING INT.
1-6 7951-3350 7951-A350 1 T-SEAL
1-7 7951-3220 7951-A220 2 T-SEAL
1-8 7950-3324 7950-A324 1 T-SEAL
1-9 7824-1257 7824-1257 1 RETAINER RING EXT.
1-10 7813-3248 7813-A248 2 O-RING 90 NITRILE
1-11 7813-3355 7813-A355 1 O-RING 90 NITRILE
1-12 7813-3251 7813-A251 1 O-RING 90 NITRILE
1-13 P607951-3427 P607951-3427 1 T-SEAL
1-14 9905-2859 9905-2859 1 BACK-UP RING

totsales@nov.com nov.com/tot Page 8 of 21


M60ES44-NX449L-MAN-001
Rev 05

M60ES46-ACT4X-ASM-001

totsales@nov.com nov.com/tot Page 9 of 21


M60ES44-NX449L-MAN-001
Rev 05

10 9905-2003XL
4.06 10K PIPE/SLIP ACTUATOR ASSEMBLY
Reference Drawing 9905-2003XL-ASM-001

Disassembly - Open the bonnets per 4.0 Operation and vent all hydraulic pressure to zero. Remove rams and remove
rod head (15). Remove bonnet seal (1-7 & 1-12). Remove socket head cap screws (10) and housing (13) from end cap
(3). Remove socket head cap screws (19 & 20).

Remove end cap (3) and indicator rod (9). CAUTION: Do not scratch inside surface of main cylinder (5) when removing
indicator rod (9). Remove O-rings (1-1 & 1-13), seal (1-11) and retainer (1-3) from end cap (3). Remove indicator rod
seal (1-9) and retainer (1-10) from end cap (3). Remove change cylinders (4) and main cylinder (5) from bonnet (2).
Remove piston (12) and T-seal (1-5) from bonnet (2).

Support weight of bonnet (2) and remove ram change rod (6 & 7) from body with Allen wrench. CAUTION: Do not
scratch surfaces of ram change rods. NOTE: Specific location of change rods as they have differing thread sizes.

Remove O-rings (1-2) from body. Remove ram change rods (6 & 7) from bonnet (2). Remove T-seals (1-6) from ram
change rods (6 & 7). Remove O-rings (1-1 & 1-13), seals (1-11) and retainers (1-3) from bonnet (2). Remove bushings
(8) and seals (1-4) from bonnet (2). Clean and inspect all parts for wear before reassembly.
Assembly - Typical reverse order of Disassembly.

9905-2003XL
4.06” 10K PIPE/SLIP ACTUATOR ASSEMBLY
Reference Drawing 9905-2003XL-ASM-001

ITEM PART NO. QTY. DESCRIPTION


1 *ES46-SK04* 1 SEALS KIT
2 9905-2841B 1 BONNET
3 9905-2842B 1 HYDRAULIC CAP
4 9905-2843B 2 RAM CHANGE CYLINDER
5 9905-2844B 1 CYLINDER
6 9905-2845B 1 RAM CHANGE ROD CLOSE
7 9905-2864B 1 RAM CHANGE ROD OPEN
8 9905-2835 2 BUSHING
9 9905-2853B 1 INDICATOR ROD
10 9905-0846G 4 SHCS .500-13UNC
11 9905-2834B 4 BONNET BOLT
12 9905-2421XB 1 PISTON ASSEMBLY
13 9905-2422B 1 LOCK SCREW HOUSING
14 9905-2424 1 GUIDE ROD
15 9905-2425B 1 ROD HEAD
16 9905-2832B 1 LOCK SCREW
17 7938-0510B 1 NUT .625-18UNF
18 9905-2851 1 HAND WHEEL

totsales@nov.com nov.com/tot Page 10 of 21


M60ES44-NX449L-MAN-001
Rev 05

19 7935-1018G 6 SHCS .625-11UNC


20 9905-1242G 6 SHCS .750-10UNC
21 7942-0402 2 SSCR .250-20UNC
22 8741-0169B 1 ROCKER
23 2001-0168XB 1 RAM GUIDE

ES46-SK04*
SEAL KIT F/ PIPE/SLIP ACTUATOR ASSEMBLY
Reference Drawing 9905-2003XL-ASM-001

ASSEMBLY NUMBER ES46-SK04 ES46-SK04B ES46-SK04F

H2S & NORTH SEA H2S & ARCTIC HIGH TEMP


ITEM DESCRIPTION QTY. 0°F-400°F
SERVICE -25°F SERVICE -50°F
1-1 O-RING 4 7813-3225 7813-A225 7813-F225
1-2 O-RING 2 7813-3220 7813-A220 7813-F220
1-3 RETAINER 3 7826-1756 7826-1756 7826-1756
1-4 SEAL 4 7820-1371 7821-1371B P607825-1371F
1-5 T-SEAL 1 7951-3350 7951-A350 P607951-3350F
1-6 T-SEAL 2 7951-3220 7951-A220 P607951-3220F
1-7 O-RING 1 7813-3355 7813-A355 7813-F355
1-8 PLUG 4 7934-0202 7934-0202 7934-0202
1-9 SEAL 1 7820-0251 7821-0251B 7825-0251
1-10 RETAINER 1 8007-3038 8007-3038 8007-3038
1-11 SEAL 4 7821-1379 7821-1379B 7825-1379
1-12 BACK-UP RING 1 9905-2859 9905-2859 9905-2859
1-13 O-RING 2 7813-3248 7813-A248 7813-F248

totsales@nov.com nov.com/tot Page 11 of 21


M60ES44-NX449L-MAN-001
Rev 05

9905-2003XL-ASM-001

totsales@nov.com nov.com/tot Page 12 of 21


M60ES44-NX449L-MAN-001
Rev 05

11 *EQ10-0001*
EQUALIZING VALVE ASSEMBLY 10K
Reference Drawing EQ10-0001 & Assembly Views

EQ10-0001

EQ10-0001X
10K EQUALIZING VALVE ASSEMBLY, H2S/NORTH SEA SERVICE (-25°F THRU 250°F)
Reference Drawing EQ10-0001

Item Part Number Qty. Part Description


1 7808-1422B 1 Equalizing Valve Bonnet
2 7808-1426XB 1 Valve Stem
3 7903-1122XB 1 Valve Seat
4 EVA4-S000 1 Seal Kit 10K H2S/North Sea Service (-25°F thru 250°F)

EVA4-S000
SEAL KIT F/ 10K EQUALIZING VALVE ASSEMBLY, H2S/NORTH SEA (-25°F THRU 250°F)
Reference Drawing EQ10-0001

Item Part Number Qty. Part Description


4-1 7808-1427 1 Spacer
4-2 7813-4911 1 O-Ring, 90 Viton
4-3 7817-0371 4 Seal, Polymyte
4-4 7940-2501 1 ¼” Allen Wrench (Not Shown)

totsales@nov.com nov.com/tot Page 13 of 21


M60ES44-NX449L-MAN-001
Rev 05

M60EQ10-0001XB
10K EQUALIZING VALVE ASSEMBLY, ARCTIC SERVICE (-50°F THRU 200°F)
Reference Drawing EQ10-0001

Item Part Number Qty. Part Description


1 7808-1422B 1 Equalizing Valve Bonnet
2 7808-1426XB 1 Valve Stem
3 7903-1122XB 1 Valve Seat
4 EVA4-S000B 1 Seal Kit 10K Arctic Service (-50°F thru 200°F)

EVA4-S000B
SEAL KIT F/ 10K EQUALIZING VALVE ASSEMBLY, ARCTIC SERVICE (-50°F THRU 200°F)
Reference Drawing EQ10-0001

Item Part Number Qty. Part Description


4-1 7808-1427 1 Spacer
4-2 7813-A911 1 O-Ring, 90 Viton
4-3 7817-0371B 4 Seal, Polymyte LT
4-4 7940-2501 1 ¼” Allen Wrench (Not Shown)

totsales@nov.com nov.com/tot Page 14 of 21


M60ES44-NX449L-MAN-001
Rev 05

*EQ10-0001* DISASSEMBLY PROCEDURE

NOTE: The Equalizing Valve Bonnet outer thread is cut with a 1.500-12UNF-2A LEFT HAND thread.

Remove the Equalizing Valve Bonnet (1) from the Equalizing Valve Port on the BOP body.

Using the ¼” Allen Wrench (4-4), remove the Valve Stem (2) by rotating clockwise until the Stem can be unscrewed by
hand on the inner face of the Equalizing Valve Bonnet.

Once loose, unscrew the valve stem (2) all the way out of the bonnet, removing the two seals (4-3) and spacer (4-1) in the
process.

Remove and Discard the O-Ring (4-1) from the Bonnet (1).

NOTE: Take note of the direction of the seals for reassembly, the lip is towards the pressure.

totsales@nov.com nov.com/tot Page 15 of 21


M60ES44-NX449L-MAN-001
Rev 05

Remove the Equalizing Valve Seat (3) from the Equalizing Valve Port on the BOP Body. A heavy piece of wire shaped as a
hook can be used to help aid in this process.

Remove the two Seals (4-3) from the Equalizing Valve Port in the same manner as the Equalizing Valve Seat.

NOTE: Take care not to damage the sealing surface. If the seat or seals are stuck, hold the hooked wire in place with the
Allen wrench as you pull out of the Equalizing Valve Port.

*EQ10-0001* ASSEMBLY PR0CEDURE

Install the two Seals (4-3) into the Equalizing Valve Port on the BOP Body. The direction of the Seals is with the lip (O-
Ring) facing inward towards the pressure.

With the Seals in place, install the Seat (3) into the Equalizing Valve Port on the BOP Body.

NOTE: Take care not to damage the sealing surface.

totsales@nov.com nov.com/tot Page 16 of 21


M60ES44-NX449L-MAN-001
Rev 05

Install the Valve Stem (2) into the Equalizing Valve Bonnet (1), rotating it to the full open position.

Install the Spacer (4-1) onto the stem bevel side first. Install two Seals (4-3) onto the stem and into the bonnet. The
direction of the Seals is with the lip facing inward towards the pressure.

Install O-Ring (4-2) onto the Equalizing Valve Bonnet (1).

Check that the Stem (2) is in the fully open position using the ¼” Allen Wrench.

NOTE: The Equalizing Valve Bonnet outer thread is cut with a 1.500-12UNF-2A LEFT HAND thread.

Install the Bonnet/Stem Assembly into the Equalizing Valve Port on the BOP body.

totsales@nov.com nov.com/tot Page 17 of 21


M60ES44-NX449L-MAN-001
Rev 05

12 ES4R-*S****
4.06” SHEAR/SEAL RAM ASSEMBLIES
Reference Drawing ES4R-XSXX-ART-001

Disassembly - Remove socket head cap screw (4) and blade assembly (5 or 6) by pushing assembly out the side of the
ram body (1 or 2). Remove blade retainer (7) from blade assembly. Remove rear seal (3). Clean and inspect all parts
before replacement.
Assembly - Place blade retainer (7) into blade assembly (5 or 6) while holding blade retainer (7) in position in the blade
assembly (5 or 6). Slide both into position in the ram body (1 or 2). Secure in place with socket head cap screw (4).
Install rear seal (3) to fit flush with surface of ram body (1 or 2).

ES4R-LS**AB
3.06”/4.06” SHEAR/SEAL RAM ASSEMBY W/ L.T. NITRILE SEALS, H 2S ARCTIC -50°F TO 200°F
Reference Drawing ES4R-T005

Item Part Number Qty Description CT SIZE CODE**


1 9905-4251AB 1 Ram Body LH 1.00” thru 2.38” ** SIZE
9905-4151AB Ram Body RH 1.00” thru 1.75”
2 1 44 1.00” thru 1.75”
9905-4161AB Ram Body RH for 2.00 thru 2.38”
3 7804-2538 2 Rear Seal, LT Nitrile 61 2.00” thru 2.38”
4 7935-0605 2 SHCS .375-16UNC
5 8801-05** 1 Shear/Seal Blade LH, LT Nitrile
6 8801-06** 1 Shear/Seal Blade RH, LT Nitrile
7 8741-0132 2 Retainer Bar
Replace ** with CT size code for assembly and part numbers

ES4R-VS**A
3.06”/4.06” SHEAR/SEAL RAM ASSEMBLIES W/L.T. VITON SEALS, H 2S, NORTH SEA, -25°F TO 250°F
Reference Drawing ES4R-T005

Item Part Number Qty Description CT SIZE CODE**


1 9905-4251AB 1 Ram Body LH 1.00” thru 2.38” ** SIZE
9905-4151AB Ram Body RH 1.00” thru 1.75”
2 1 44 1.00” thru 1.75”
9905-4161AB Ram Body RH for 2.00 thru 2.38”
3 7804-2537 Rear Seal, LT Viton
2 61 2.00” thru 2.38”
31 7804-2537C Rear Seal, LT Nitrile Modified Taper
4 7935-0605 2 SHCS .375-16UNC
5 8801-07**B 1 Shear/Seal Blade LH, LT Viton
6 8801-08**B 1 Shear/Seal Blade RH, LT Viton
7 8741-0132 2 Retainer Bar
Replace ** with CT size code for assembly and part numbers

Note: Item 31 7804-2537C Rear Seal to be used if damage to seal front end occurs during installation. This “C suffix” seal has a
reduced elastomer contact area.

totsales@nov.com nov.com/tot Page 18 of 21


M60ES44-NX449L-MAN-001
Rev 05

ES4R-XSXX-ART-001

totsales@nov.com nov.com/tot Page 19 of 21


M60ES44-NX449L-MAN-001
Rev 05

13 ES4R-VT**** - 4.06" Pipe Slip Ram Assemblies


Reference Drawings ES4R-VTXX-ART-001

Disassembly - Remove front seal (4) and retainer bar (2). Push slip insert (3) toward rear of ram (1) to access retainer ring (7).
Remove Lock Screws (9) from Ram Body (1) and Slip Insert (3). Remove compression pin (6) and slip insert (3) by pushing
compression pin toward front of ram. Remove O-ring (8) and rear seal (5). Clean and inspect all parts - replace as needed.

Assembly - Install rear seal (5) to fit flush with surface of ram body (1). While holding the retainer bar (2) in position in the front
seal (4), slide both into position in the ram body (1). Place O-ring (8) onto compression pin (6). Slide compression pin into slot on
rear of slip insert (3). Install compression and slip insert assembly into body and secure with retainer (7). Install Lock Screws (9)
into Ram Body (1) and Slip Insert (3).

ES4R-VT**
4.06" PIPE SLIP RAM ASSEMBLY H2S
Reference Drawings ES4R-VTXX-ART-001

ES4R-VT**A ES4R-VT**AB
Qty. Part Description
Item -25°F to 250°F -50°F to 200°F
1 9905-19**AB 9905-19**AB 2 Ram Body

2 8302-2721 8302-2721 2 Retainer Bar


8440-67** 8440-67** 2 Slip Insert
3
8440-6701 8440-6701 - Blank Slip Insert (Optional f/ 1.00-2.00 coiled tubing sizes)

4 8440-64**D 8440-66**D 2 Front Seal

5 9905-1901D 9905-1903 2 Rear Seal

6 9905-2426XB 9905-2426XB 2 Compression Pin

7 7824-1007 7824-1007 2 Retainer Ring

8 7813-4210 7813-A210 2 O-Ring

9 9328-0510 9328-0510 2 Lock Screw

CT SIZE VARIABLE CODE **


** SIZE
35 1.00”
37 1.25”
41 1.50”
44 1.75”
51 2.00”
61 2.38”

totsales@nov.com nov.com/tot Page 20 of 21


M60ES44-NX449L-MAN-001
Rev 05

ES4R-VTXX-ART-001

totsales@nov.com nov.com/tot Page 21 of 21

You might also like