You are on page 1of 6

SMFZ-70 Tea bag packing machine

Operating manual

Model: SMFZ-70
Date:
Inspector:
Matainance:
1.Brief introduction

1.1 Summary
1.2 Control panel
1.3 Connector of the machine side
1.4 Product specifications and performance
1.5 Working condition

2 Installation instructions
2.1 Check when you open the package
2.2 How to use
2.3 Application notice

1.1 Summary
This product has been excellent engineers carefully study design, the use of
microcomputer control of optical technology, high accuracy, fast, good quality
, solve the traditional tea packaging tedious process. An automatic dosers sev
eral labor equivalent amount of tea production and tea shop is a good helper.

1.2 control panel

1. The actual temperature (side seal):it will show the actual sealing temperat
ure when the machine is working.
2. The actual temperature (crosswise seal)
3. Heating light: the heating light will been on, the machine is heating the si
de .
4. heating light: the heating light will been on , the machine is heating the cr
osswise.
5. Set the temperature:Pre-set sealing temperature (plus or minus)
6. The actual length: it will show the actual length when the machine is worki
ng.
7. Set the length
8. Temperature ready: when the temperature is enough, the light will been o
n.
9. Working ready: when the machine is working, the light will been on
10. Set the lengh:plus or minus
11. Function: change the seting temperature of side seal or crosswise seal. If
you want to set the temperature 1 , first press the function, when the heat
ing 1 is on, you can though plus or minus to set temperature 1, also it is t
he same to set the temperature 2

1.3 connector of the machine side.

1.4 Product specifications and performance

1.5 working condition


2 Installation instructions

2.1 Check when you open the package


1.when you open the package ,it will include:
2.particle filing machine 1 pcs
3.Film bracket 1 pcs, fixing screw 3 pcs (2 long screw, and one short screw)
fixing sleeve 3 pcs
4.infrared sensor 1 pcs. Blanking controller 1 pcs
5.power line 1 pcs
6.Manual 1 pcs

Please check whether the machine is damaged during the delivery, if there is
some parts missing or damaged,pls contact with us, and do not start the fillin
g machine.
Before you start the particle filling machine, pls take off the three screw.

2.2 how to use

1, Take out the screws and bracket to fix the bracket on the right of machine,install the
film roller on the top of bracket.

Open the package, Take out the screws and bracket to fix the bracket on the
right of machine,install film roller on the top of bracket.Turn on the handle
below( open and close of handle control the two black wheel .when you instal
l the film roll, must turn on handle to open state first. when you finish the film
roll installation, turn off handle to close,let the blacket wheel clamp the film)

2. Install film roll on the bracket,cut the film roll to triangle,


let the film easy go through the former make the film bilateral symmetry.
3.Turn the handle to the close.and black wheel will clamp the film, it will let th
e film go down.
4. First take off the three screw of the partilce filling machine. put the partilce
filling machine on the platform. Connect the sealing machine and filling mach
ine (rightmost side).

5,Put the feeding controller in front of the sensor and make the black plate of feeding
controller block the sensor and make it can detect the material as photo show:

6, Put the sensor on a fixed frame,and adjust the angle,make the sensor light point at
the filling nozzle of tea weighing machine,as photo show.
7.Turn on the machine, set the weight on display panel of partical filling
machine and press start button on the machine.For example:set 0010 is to
set up 10gram.When the temperature is reached enough, machine will start
to fill and seal automaticlly .

Note:(The temperature setting is related to the quality of the seal, if the temp
erature is set too high ,bags are easy to burn out; if temperature is set too lo
w,bags can not be sealed, usually we set at 145 degrees or above
depends on film roll thickness ).If still not seal after the temperature is
reached,then check the film roll if install wrong,change to the opposite side of
film roll to install again and it will seal,it has 2 sides for the film roll.

8.Adjust the bag length can seal different weight of products.


Length set: for example:if you set it 60,the bag length will come out about
9cm.

2.3 Application notice


A, pls read the manual and have a look at the Installation Video before you st
art the machine.
B, the machine outlet must be grounded.
C.put the machine on the stable place, to avoid vibration then affect the accur
acy
D.do not let the machine to face the sunshine and other hard light. The sunsh
ine or other hard light will affect the infrared induction.
E.when you begin to use the machine, do not move the machine optionally,to
avoid the damage.
F.turn off the machine when you do not use the machine,it will Extend the life
of the machine.

Pls read the manual before operating machine,familiar with adjustment and operation.

Machine must put it in a stable place,avoild vibration to keep the filling accuracy.

You might also like