Professional Documents
Culture Documents
Creators
Contractor
Sl.no Description of work Recommended Per
Rate
rate
II.CONCRETE
PCC 1:5:10 (using 40 mm metal) for foundation
4 35.00 25.00 Cft
leveling course.- 6" Tk
III.RCC work
Reinforced cement concrete using 20mm metal for
6 the following work including the charges for
centering, scaffolding and deshuttering but excluding
fabrication of steel reinforcement
Roof slab
i One way slab 60.00 55.00 Sft
ii Two way slab 65.00 60.00 Sft
Overhead tank
i Base slab / Cover slab 85.00 85.00 Sft
ii RCC wall - 7" tk 90.00 90.00 Cft
iii Beams 90.00 90.00 cft
IV.MASONRY
Coursed rubble masonry in CM 1:6 including
7 necessary bond stones at every 8’0” interval in each 28.00 25.00 Cft
layer dressing of stones etc., complete.
V.FLOORING
12 PCC 1:4:8 (using 40 mm metal) for Flooring.- 4½" Tk 13.00 10.00 Sft
VI.JOINERIES
Fixing of Doors /Window/Ventilators/ with necessary
23 110.00 450.00 No's
packing of holdfasts with concrete
VII.STEEL
Fabricating of steel for reinforced concrete works in
all heights including straightening, cleaning,
cutting,bending,hoisting providing overlaps, tieing in
28 12000.00 10000.00 MT
position for all works, as per detailed drawings
supplied with relevant std specs.(Excluding cost of
binding wire).
VIII.PLASTERING
Creators
Contractor
Sl.no Description of work Recommended Per
Rate
rate
Ceiling plastering in CM 1:3 finished smoothly
29 15.00 15.00 Sft
including scaffolding
IX.PAINTING
Painting one coat of Kottayam or JK brand or Birla
38 white cement Including cost of scrapping and 2.25 2.25 Sft
brushes
X.GENERAL
Packing of purlin angles above masonry wall with
39 M20 cement concrete ,including aligning to a straight 300.00 300.00 No
line and levelling etc,complete.
NOTE
Rate will be quoted for all levels/all floor i.e additional charge for lifting will NOT be paid
Sl.no Quantity Description of work
I.EARTH WORK EXCAVATION
Mass earth work excavation for the entire area in all soils except those soil
which require chiseling, including shoring, strutting & bailing out water
wherever necessary & depositing the surplus earth in places shown by
1
authorised person , including the cost of site clearing, marking as per drawing
& levelling, with an initial lead of 10m lift, hereunder specified, complete in all
respects, complying to relevant standard specifications.
Earth work excavation for all works like column pits, trenches,cellar,pits for
wall foundation, plinth beams etc ., in all soils except those soil which
require chiseling, including shoring, strutting & bailing out water wherever
necessary & depositing the surplus earth within the premises and places
2 shown by authorised person, and refilling the sides of foundation with
excavated earth, with compaction in layers not more than 150mm, including
the cost of site clearing, marking as per drawing & levelling, with an initial lead
of 10m lift, here under specified, complete in all respects complying to relevant
standard specifications.
- do - hard gravel & in soft rock including chiseling, cutting etc., except in
3
hard rock which requires blasting.
m3 From natural ground level upto 1.80 m depth.
m3 Below 1.80 m depth.
- do - in hard rock which requires blasting but cannot be blasted due to site
conditions,using hydraulic jack hammer and has to be chiseled to the
4 required depth as may be directed including trimming the bottom to the
required size (Qty as per actual measurement (or) stack measurement minus
40% of the stack measurement for voids, whichever is lesser).
- do - in hard rock which requires blasting ,done with controlled blasting, to the
5 required depth, as may be directed' including trimming the bottom to the
required size.
m3 From natural ground level upto 1.80 m depth.
m3 Below 1.80 m depth.
- do - in hard rock which requires blasting,done without controlled blasting to
6 the required depth, as may be directed, including trimming the bottom to the
required size.
m3 From natural ground level upto 1.80 m depth.
m3 Below 1.80 m depth.
Filling the basement with coarse pallam sand in layers of 300mm thickness,
watered, well rammed and consolidated using earth rammer, including cost
7 m3
and conveyance of all materials complete, complying with the relevant std
specs.
Filling the foundation and basement with well gravel in layer of 300mm
thickness, watered, well rammed and consolidated using earth rammer,
8 m3
including cost and conveyance of all materials complete, complying with the
relevant std specs.
Filling the basement with River sand in layer of 300mm thickness, watered,
9 m3 well rammed and consolidated using earth rammer, including cost and
conveyance of all materials complete,complying with the relevant std specs.
Filling the foundation and basement with excavated earth, in layer of 300mm
thickness, watered ,well rammed and consolidated using earth rammer,
10 m3
including cost and conveyance of all materials complete, complying with the
relevant std specs.
Transporting excess earth, or earth unsuitable for refilling, inside the site
11 m3 itself, and as directed, including lorry hire charges, labour for loading and
unloading etc., complete.
Transporting excess earth, or earth unsuitable for refilling, outside the site,not
12 m3 less than 2Km, as directed, including lorry hire charges, labour for loading and
unloading etc., complete.
Excavation in all types of soil viz. sand, clay, black cotton,soft & hard
murum,soil consisting of layers of pebbles etc. (excluding soft/hard rock) for
retaining wall, footings, steps, plinth beams, masonary & equipment
foundations, pile caps, drains, trenches,manholes underground tanks, etc
13 m3
including shoring, strutting, dewatering where required (until foundation work
is complete). Item also includes carting, stacking if required by Owner,
spreading, leveling & compacting/consolidating surplus materials within 500m
lead within Owner's premises.
Excavation at all levels in hard rock by using chisels and /or pneumatic drills,
etc. in all types of structures for footings steps, plinth beams, masonry &
equipment foundations,pile caps, drains, trenches, manholes, etc I/c
15 m3 shoring,strutting dewating where required (until foundation work iscomplete).
Item also includes carting, stacking if required by owner spreading ,leveling
and compacting / consolidating surplus materials within 500 m lead within
Owner's premises.
Same as item 5.0 above - with selected excavated earth available and stacked
18 m3
somewhere within Owner's premises.
Same as 5.0 above - with earth of approved quality provided & brought by
19 m3
Contractor from outside Owner's premises.
II.CONCRETE
Plain Cement Concrete 1:5:10 (One of cement, Five of sand, and Ten of
40mm Hard blue granite metal)machine mixed, for levelling course for wall
footings, column footings,plinth beam base, machinery beds etc.,including
20 m3
shoring, necessary shuttering,bailing out of water if necessary, ramming,
compaction, curing, etc, cost &conveyance of all materials complete in all
respects, complying with relevant std specifications.
Plain Cement Concrete 1:4:8 ( one of cement, four of sand, and eight of 40mm
Hard blue granite metal ) for levelling course for wall footings, column
footings, plinth beam base, machinery beds, etc., including charges for
21 m3
shoring,necessary shuttering, bailing out of water if necessary, ramming,
compaction, curing, etc, cost & conveyance of all materials, complete in all
respects, complying with relevant std specs.
Brick jelly concrete with brick jelly of 20mm size in pure slacked lime over
roof,gutter slab in ratio 32 :12 1/2 of brick jelly to lime (fat lime), well beaten
22
with wooden beaters, giving required slopes,complete, complying with relevant
standard specifications and as directed.
Brick jelly concrete 1:3:6 ( one of cement,three of sand, six of brick jelly )
23 m3 using 20mm broken brick jelly for sunken flooring, well mixed, including labour
charges for laying, curing, etc., complete, complying with relevant std specs.
Supplying and Filling the sunken portion with Hemalite with C.M 1:3 mix ( one
24 m3 of cement, three sand ) well mixed including labour charges, laying curing,
etc., complete complying with relevant std specs.
Providing and laying plain cement concrete (nominal mix) using specified
graded coarse aggregate of approved quality at various locations etc. machine
25 m3 mixing, consolidating with rammer/ vibrators, curing, providing scaffolding,
staging etc. complete as directed and instructed by Engineer. (Form work
shall be paid separately under relevant item).
- do - with 1:4:8 grade concrete using 40 mm maximum size and down graded
a) aggregate below foundations, base slab, plinth beams, walls etc.Below Plinth
Beams
- do - with 1:2:4 grade concrete with 20 mm maximum size and down graded
b)
aggregate in copings, sills, etc.
Reinforced Cement Concrete M20 grade, using for all reinforced cement
concrete works mentioned below ,including necessary shuttering, centering,
26 m3
scaffolding materials, labour charges, curing, etc., but excluding cost
&fabrication of reinforcement, complete, complying with relevant std specs.
a) Column Footing
b) Columns
c) Plinth beam
d) Tie beam
e) Sill beam
f) Lintel
g) Sunshade
h) Gutter Wall
j) Roof Beam
k) Roof Slab
l) Gutter Slab
m) Trench slab
n) Column Bracket
NOTE : The rate shall include for cost of supplying binding wires, concrete
cover blocks etc.
Reinforced Cement Concrete M20 grade, machine mixed, for all reinforced
cement concrete works mentioned below ,including necessary shuttering,
26
centring, scaffolding materials, labour charges,curing, etc., but excluding cost
&fabrication of reinforcement, complete, complying with relevant std specs.
Reinforced Cement Concrete M20 grade, using Ready Mixed Concrete for all
reinforced cement concrete works mentioned below ,including necessary
27 shuttering, centring, scaffolding materials, labour charges,curing, etc., but
excluding cost &fabrication of reinforcement, complete, complying with
relevant std specs.
Providing Plywood shuttering for all R.C.C works at all levels ,using good
28 quality plywood of sufficient thickness,including all materials and labour
charges for making,fixing and finishing etc., complete in all levels .
m2 Column(square or rectangle)
m2 Column(circular)
m2 Lintel / Beam.
m3 Sill slab
m3 Pergola
m2 Sunshade & Loft (ave. tk of 65mm).
m2 Sunshade & Loft (ave. tk of 90mm).
m2 Roof / Waist slab
m2 Gutter slab - 100mm tk.
m2 Gutter slab - 75mm tk.
m2 Bracket
m2 RCC fins, facia works
m2 Bracket
m2 RCC Wall (Circular)
m2 RCC Wall (except circular)
Providing Steel/Timber shuttering for all R.C.C works at all levels,using good
29 quality steel/timber of sufficient thickness,including all materials and labour
charges for making,fixing and finishing etc., complete in all levels .
m2 Column(square or rectangle)
m2 Column(circular)
m2 Lintel / Beam.
m3 Sill slab
m3 Pergola
m2 Sunshade & Loft (ave. tk of 65mm).
m2 Sunshade & Loft (ave. tk of 90mm).
m2 Roof / Waist slab
m2 Gutter slab - 100mm tk.
m2 Gutter slab - 75mm tk.
m2 Bracket
m2 RCC fins, facia works
m2 Bracket
m2 RCC Wall (Circular)
m2 RCC Wall (except circular)
Reinforced Cement Concrete M20 grade, machine mixed, for driven cast-in-
situ pile of dia 450mm (approx. 88 piles- each of depth varies from 20.0m to
25.0m) including necessary shuttering and placing of reinforcement in position,
30 Rmt
scaffolding materials, labour charges, curing, etc., but excluding cost &
fabrication of reinforcements, complete complying with relevant standard
specifications.
m3 Pile cap
m3 Pedestal
IV.MASONRY
Size stone masonry in Cement Mortar 1:7(one of cement ,seven of sand) for
foundation and basement (walls & trenches) using similar size stones of size
225 x 225 x 225mm with necessary bond stones at every 2.4m c/c in each
31 m3
layer and corner stones wherever necessary ,including chiselling ,trimming the
edges,perfectly packing the voids with soling stones and cement mortar,
labour charges, curing, etc., complete ,complying with relevant std specs.
Brick work/Brick on edge in Cement Mortar 1:5 (one of cement, five of sand)
using first class table moulded well burnt chamber bricks, including
28
scaffolding, soaking of bricks, curing etc., complete, complying with relevant
std specs., and drawings for all wall thickness.
m3 Stage I ( Upto Basement level ).
m3 Stage - II ( Basement to 3.25m level ).
m3 Stage III ( 3.25m to 6.50m lvl)
m3 Stage IV ( 6.50m to 9.75m lvl)
m3 Stage - V ( above 9.75m level ).
Brick partition walls of 115mm thickness using first class, table moulded,
well burnt chamber bricks using Cement Mortar 1:4(one of cement, four of
29 sand ) with necessary hoop iron in every third layer including scaffolding,
soaking, curing & including cost of hoop iron, complete in all respects
complying with relevant std.specs and drawings.
Brick work/Brick on edge in Cement Mortar 1:5 (one of cement, five of sand)
using first class wire cut bricks, including scaffolding, soaking of bricks,
30 m2
curing ,recessed pointing etc., complete, complying with relevant std specs.,
and drawings for all wall thickness.
Hollow Block Masonry using well cured concrete cavity blocks made in
P.C.C. 1:3:6 using 8mm and below crushed blue granite chips, machine
pressed,hydraulically compacted,
and constructed in Cement Mortar 1:5 without filling the cavities,including
31
transportation, lead, construction equipments & tools, including the cost of
cement used for manufacture of concrete blocks but excluding the cost of
cement used for construction, including curing,threading, scaffolding
etc.including pillars at intervals specified as per drawing, complete.
m2 400x200x200 thick
m2 400x200x150 thick
m2 400x200x100 thick
Solid Block Masonry using well cured concrete blocks made in P.C.C. 1:3:6
using 8mm and below crushed blue granite chips machine
pressed,hydraulically compacted, and constructed in Cement Mortar 1:5
32 ,including transportation, lead, construction equipments & tools, including the
cost of cement used for manufacture of concrete blocks but excluding the
cost of cement used for construction, including curing,threading, scaffolding
etc.including pillars at intervals specified as per drawing, complete.
m2 400x200x200 thick
m2 400x200x150 thick
m2 400x200x100 thick
Hollow Block Masonry using well cured concrete cavity blocks made in
P.C.C. 1:3:6 using 8mm and below crushed blue granite chips machine
pressed,hydraulically compacted, and constructed in Cement Mortar 1:5
33
without filling the cavities,including transportation, lead, construction
equipments & tools, including curing,threading, scaffolding etc.including pillars
at intervals specified as per drawing, complete.
m2 400x200x200 thick
m2 400x200x150 thick
m2 400x200x100 thick
Solid Block Masonry using well cured concrete blocks made in P.C.C. 1:3:6
using 8mm and below crushed blue granite chips machine
pressed,hydraulically compacted, and constructed in Cement Mortar 1:5
34
,including transportation, lead, construction equipments & tools, including
curing,threading, scaffolding etc.including pillars at intervals specified as per
drawing, complete.
m2 400x200x200 thick
m2 400x200x150 thick
m2 400x200x100 thick
Aerocon block masonry 600x200x150mm tk.in Cement Mortar 1:6 (one part of
35 m2 cement, six parts of sand) including scaffolding, curing etc., complete,
complying with relevant standard specifications and drawings.
Plain Cement Concrete M15 grade for steps in 1:2:4 mix(1 of cement, 2 of
sand, 4 of 20mm hard blue broken granite metal),
36 m3
machine mixed, including necessary shuttering, centering, scaffolding
materials, labour charges, curing, etc., complying with relevant std specs.
Providing & constructing brick masonry walls using bricks of first quality of
37 approved manufacturer at all locations, floors & levels including scaffolding,
racking of joints, watering etc. complete as directed & instructed by Engineer.
Brick work of thickness 230mm & above in cement mortar(1:5) mix for walls,
38 brick pillars,foundations,walls in steps,ramps,otta,manholes,drains,trench
holes, inspection chambers etc. upto plinth level.
Same as above item nos. 1.0 & 1 a) but in super structure above plinth level
39
all locations, level & height.
Providing and constructing 115 mm thick brick partitionwalls in super structure
at all floors using first quality bricks of approved manufacturer in cement
mortar (1:4) including necessary scaffolding, racking of joints, watering etc.
with RCC stiffeners as per specification. Transoms & mullions shall be
provided in the brick workwhen length or height of wall exceeds 2 m.
40
Transoms shall be provided at lintel/door height. Spacing of mullions shall not
exceed 1.5 m c/c. Size of transoms/mullions shall be 120 mm x 80 mm with
M15 grade concrete & 10mm down graded aggregate only. Reinforcement in
mullions & transoms shall be separately paid. Providing and placing form
work etc for transoms/mullions etc shall be included in the quoted rate.
V.FLOORING
Flooring with P.C.C.1:4:8 (one of cement,four of sand and eight of 40mm hard
blue granite metal),machine mixed, laid to uniform thickness, top left rough to
37
receive floor finish, including consolidating, curing, etc.,giving desired slopes,
all labour charges, complete, complying with relevant std specs.
m2 75mm thick
m2 100mm thick
m2 150mm thick
m2 75mm thick
m2 100mm thick
m2 150mm thick
Flooring with PCC 1:2:4,(one of cement,two of sand and four of 20mm hard
blue granite metal),machine mixed, laid to uniform thickness,top finished to
39 smooth surface using power trowel, including consolidating ,curing etc.,
giving desired slopes, including all labour charges complete, complying with
relevant std specs.in all levels.
m2 75mm thick
Flooring with PCC(or) R.C.C.M20 grade,machine mixed, laid to uniform
thickness,top finished to smooth surface using power trowel after removal
of excess water using vacuum dewatering system, including
40
consolidating ,curing etc., giving desired slopes, including all labour charges
complete, complying with relevant std specs.in all levels,excluding cost of steel
& fabrication
m2 75mm thick
m2 100mm thick
m2 150mm thick
Flooring with PCC M20 grade,machine mixed, laid to uniform thickness,top
finished to smooth surface using power trowel, including consolidating
41
,curing etc., giving desired slopes, including all labour charges complete,
complying with relevant std specs.in all levels.
m2 75mm thick
Trench cover slab in RCC 1:2:4 (one of cement,two of sand and four of 20mm
hard blue granite metal),machine mixed, laid to uniform thickness,top finished
to smooth surface using power trowel after removal of excess water
44 m3 using vacuum dewatering system, including top spreading, ramming ,
consolidating ,curing etc., giving desired slopes, including all labour
charges,centering etc. complete, complying with relevant specs. ,but
excluding cost & fabrication of steel reinforcement.
Granolithic flooring 38mm thick CC 1:1:3 mix ( one of cement, one of sand , 3
of hard blue granite metal of size 6 to 10 mm) , surface rendered smooth
47 m2
finish, providing proper slopes, curing ,complete , complying with relevant std.
specifications in all levels.
Granolithic flooring 38mm thick CC 1:1:3 mix ( one of cement, one of sand , 3
of hard blue granite metal of size 6 to 10 mm) ,top finished to smooth
48 m2
surface using power trowel providing proper slopes, curing ,complete ,
complying with relevant std. specifications in all levels.
Floor finishing ( slab top, trench base etc.) with C.M 1 : 4 (one of cement four
49 of sand) with average thickness 20mm ,smooth finishing with cement slurry,
rounding of corners,curing,etc., complete.
m2 Stage I ( Upto Basement level ).
m2 Stage III ( 3.25m to 6.50m lvl)
m2 Stage - V ( above 9.75m level ).
Floor finishing ( slab top, trench base etc.) with C.M 1 : 4 (one of cement four
of sand) with average thickness 20mm ,smooth finishing with cement slurry
50
& water proof compound (of approved make) rounding of corners, curing,etc.,
complete.
m2 Stage I ( Upto Basement level ).
m2 Stage III ( 3.25m to 6.50m lvl)
m2 Stage - V ( above 9.75m level ).
Floor finishing with C.M 1 : 5 (one of cement, five of sand) with average
50 thickness 20mm ,finished smooth,including rounding of corners, curing,etc.,
complete.
Supplying and spreading of NITO floor hardner, " NITOFLOR Hard top" at the
51 m2 rate of 3 kg/m2 to dewatered flooring top surface, complete complying with
relevent standard specifications.
Providing & Filling with 40mm dry metal, without sand , 300mm thickness over
53 m3 well compacted gravel base,including packing, consolidating with Dynamic
Compactor, including labour charges for filling, compacting etc.,complete
R.C.C.Flooring with 300mm tk.(TOTAL),bottom 225mm thick with M15 grade
concrete and top concrete 75mm tk. M20 grade concrete laid immediately
after the bottom layer of concrete is placed, spread to perfect level, compacted
54 m2 using screed vibrator, finished smoothly using power trowel after vaccum
dewatering including concreting, ramming, consolidating, curing, etc., including
all labour charges etc., complete excluding the cost of steel and fabrication
charges.
Providing & laying Kotta stone(20 mmthick) with the size of 0.60 cm x 0.60 cm
55 m2 laid with Cement mortar 1:5 mix (one of cement , five of sand ) including cost
of grinding & polishing etc., complete
Providing & laying Kotta stone (38mm tk.) with the size of 55 cm X 55 cm laid
56 m2 with cement mortar 1:5 mix. (one of cement , five of sand ) including cost of
grinding & polishing etc., complete
Providing skirting with kotta stone (20 mm tk.) 100 mm height , including
57 Rmt
fixing,polishing, wall chipping, curing,labour charges etc., Complete.
Providing and dadooing with glazed tiles of approved make and colour over
rough plastered surface and pointing the glazed tiles with relevant compound,
59 m2
curing , cutting, grinding, jointing, cement floating etc., complete in all
respects.
Providing and laying vitrified tiles (610x610mm ) of approved make, colour &
design over 20mm thick cement mortar 1:5 mix ,pointing the tiles with relevant
60 m2
compound, curing, grinding,jointing, cement floating, etc., complete in all
respects.
Providing and laying Aathangudi clay tiles of approved colour & design over
20mm thick cement mortar 1:5 mix ,pointing the tiles with relevant
61 m2
colour,curing ,grinding,jointing, cement floating, etc., complete in all respects.
Providing and laying ceramic tiles (anti skid) of approved make, colour &
design ,over 20mm thick cement mortar 1:5 mix ,pointing the ceramic tiles with
62 m2
relevant compound, curing ,grinding,jointing, cement floating, etc., complete
in all respects.
Providing and laying ceramic tiles (anti skid) of approved make, colour &
design laid with 4mm to5mm spacing, using CM 1:3 and the joints packed with
63 m2
Epoxy mortar ( Cipoxy30-base and hardener, mixed at the ratio of 1:1 with
fine sand) etc., complete.
Providing and laying of polished granite tiles of size (1' 0" x 2' 0") and 8mm
thick of approved make & design over 20 mm tk cement mortar 1:5 mix ( one
64 m2
of cement , five of sand ) and pointing the tiles with relevant compound,
curing, grinding & jointing, cement floating, etc., complete in all respects.
Providing and laying polished Granite for skirting - 100mm height of approved
make, colour & design, projected 6mm from finished wall face, pointing the
65 m2
granite with relevant compound and curing ,grinding,jointing,cement floating,
etc., complete in all respects
Providing & laying polished Granite slab 25mm tk.for flooring,of approved
make & design over 20 mm tk cement mortar 1:5 mix ( one of cement , five
66 m2
of sand ) and pointing the tiles with relevant compound, curing, grinding &
jointing, cement floating, etc., complete in all respects.
Providing and laying the following skirting joined with neat white or black
cement slurry mixed with pigment to match the shade/colour of the tile/slab
68
including necessary curing,machine cutting,mirror polishing,washing with acid
and finishing with wax all complete as directed in all floors.
Providing and finishing in all granite including polishing labours etc., complete.
69
in all levels
Rmt Full round nosing
Rmt Half round nosing
Providing and finishing in all marble including polishing labours etc., complete.
70
in all levels
Rmt Full round nosing
Rmt Half round nosing
Providing and laying Eurocon tiles of approved colour and design over 20mm
thick cement mortar 1:5 mix ( one of cement , five of sand ),pointing the tiles
75 m2
with relevant colour compound, curing ,grinding,jointing, cement floating, etc.,
complete in all respects (for steps,riser and floor ) in all levels.
Providing and finishing the top of roof slab with COMFORTILE (Thermal
insulation roof tile - manufactured by M/s Hyderabad Industries Limited ) over
20mm tk. Cement Mortar 1:5 . After curing, laying brick jelly concrete over the
76 m2 tiles with brick jelly of 20mm & down size mixed with pure slacked lime in the
ratio of 32:12.5 of brick jelly to lime ( fat lime), well beaten for reqd.,slope to
drain rain water. Top of surki to be finished with Cement mortar 1:4, complying
with relevant std. specifications and as directed.
Providing & laying polished Cudappah slab for shelves 25 to 30mm tk.
77 m2
including making grooves in brick wall and fixing in position etc., complete.
Providing and laying cement skirting 18 mm tk. and 75mm ht.(Projected 6mm
79 Rmt from finished wall face finished with neat cement including base of Cement
plaster 1:5)
Providing skirting with cudappah slab 4" height for skirting including
80 Rmt
fixing,polishing & wall chipping,curing,labour charges etc., complete.
Providing and laying well compacted 100 mm thk M20 grade vaccum
dewatered process tremix concrete flooring with neat cement finish & power
trowelled to get desired smooth, finishing & levelling including shuttering,
making expansion joints, construction, control and isolation joints and cutting
grooves, curing etc complete for all operations of concret ing. The size of the
81
groove to be cut for forming panels in concrete should be 4mm x 30mm &
panels of size 3M to 5M and 6M to 8M. The opera tion should be carried out
as required. The groove joints should be filled with premoulded bitumen joint
epoxy fillers. The surface tolerance should not exceed 3mm in three metre
length measured by straight edge in any direction.
Providing and laying well compacted 150 mm thk M20 grade vaccum
dewatered process tremix concrete flooring with neat cement finish & power
trowelled to get desired smooth, finishing & levelling including shuttering,
making expansion joints, construction, control and isolation joints and cutting
grooves, curing etc complete for all operations of concret ing. The size of the
82
groove to be cut for forming panels in concrete should be 4mm x 30mm &
panels of size 3M to 5M and 6M to 8M. The opera tion should be carried out
as required. The groove joints should be filled with premoulded bitumen joint
epoxy fillers. The surface tolerance should not exceed 3mm in three metre
length measured by straight edge in any direction.
VI.JOINERIES
STEEL
Providing and fixing in position of steel windows with 12mm guard bars of std.
mild steel rolled sections (mfd. as per architect's design) jointed, mittred &
electrically flush welded with iron lugs, embedded in cement concrete block of
230 x 230 x 230 in 1:3:6 (1 of cement, 3 of sand and 6 of 20mm & down hard
blue granite metal) well packed, complete as per detailed drawings, including
necessary approved hardware, neatly finished with one coat of red oxide
81 m2 primer of approved quality , including providing and fixing of plain glass of
approved make as per specifications with glazing clips, necessary wooden
beading, including centrally pivoted shutters with suitable lever arrangement
for combined operation of shutters upto 90 degrees & arrangements for
closing/locking windows from inside including providing & fixing oxidised steel
handle, stays, etc., complete with necessary screws all as per detailed
drawings and as directed.
Supplying and fixing of Zinc chromate Red Oxide painted hollow metal
pressed steel windows, frame section of size 105 x 50 x 18g CRCA sheet,
shutter made out of hot rolled section with 12mm Sq. rod guard bars @
83 m2 125mm c/c, shutter opening out for glass and shutter opening inside with
arrangement for fixing flymesh.(including of flymesh). The fittings shall be
friction hinges for outer shutter and box hinges for inner shutter with necessary
holdfasts & arrangements for fixing of flymesh with screws.
Supplying and fixing of steel ventilators using std.,
MS rolled steel section,joints mittred and electrically welded with 40mmx6mm
lugs, 150mm long, embedded in CementConcrete blocks of size
84 150x150x150mm in 1:3:6 mix(1 of cement,3 of sand and 6 of 20mm and
downgrade hard blue granite metal ), including providing & fixing of approved
glass panes of 4mm thick, pin headed, including cost of one coat of metal
primer,complete in all respects.
m2 Fixed glazing with steel framework.
m2 N-type ventilators.
m2 Steel frame with glass louvers
Supplying & Fixing of hollow metal GI steel flush doors with fixed glazing,
both frame & shutter shall be made from GI sheet with zinc coating not less
than 120gm per Sq.m and matt finish surface.Frame shall be of size 100mm x
50mm x 1mm for single rebate & 150mm x 60mm x 1mm for double
rebate.Shutter shall be of 35mm thick, the top & lower skin shall be having
0.6mm thick sheet & shall be joining them by roll formed snap fitting groove
on the styles & top & bottom may be formed on the bending machine. A
90 m2
thermal barrier shall be used between two sheets. The hollow portion filled
with core material in solid polyurethane foam & the density of foam shall not
be less than
40kg/ m3. Shutter will have 3 nos hinges having 3mm thick flat with 9.50mm
GI Screws. The fitting & fixtures of mortice lock, aldrop, tower bolts,
handles,door closers & door stoppers etc., as per relevant standard
specifications. .
Supplying & fixing of hollow metal pressed GI steel flush door cum Ventilator
( refer drg.) of both frame & shutter shall be made from GI sheet with zinc
coating not less than 120gm per Sq.m and matt finish surface.Frame shall be
of size 100mm x 50mm x 1mm for single rebate & 150mm x 60mm x 1mm for
double rebate.Shutter shall be of 35mm thick, the top & lower skin shall be
having 0.6mm thick sheet & shall be joining them by roll formed snap fitting
90 m2 groove on the styles & top & bottom may be formed on the bending machine.
A thermal barrier shall be used between two sheets. The hollow portion filled
with core material in solid polyurethane foam & the density of foam shall not
be less than 40kg/ m3. Shutter will have 3 nos hinges having 3mm thick flat
with 9.50mm GI Screws. The fitting & fixtures of mortice lock, aldrop, tower
bolts, handles,door closers & door stoppers etc., as per relevant standard
specifications.
Fixed Type
NCL SECCOLAR
Supplying and fixing of " NCL Secular " joineries, fabricated from Roll Formed
Sections made of 0.6mm thick 'D' quality Galvanised steel as per IS 277 with
Zinc of 150 gms/ sq.m.. Sections for shutter should be of 46 x 46 mm and
external frame should be of 46 x 52 mm.Section for glass beading should be
of 18 x 25 mm and centre mullion should be of 46 x 70 mm.The sections are
to be cut to length, mitre joined with corner bracket.Centre mullions are to be
91 m2 fixed using mullion caps.Gasket made of Ethyl propylene Diamine
monomer.Mullion caps made of glass filled nylon.The GI Window sections are
to be coated with Etch primer & suitable grey primer.The above frames should
be fixed to the concrete/masonry walls by means of self expanding screws.
Including providing & fixing of approved glass panels of 4mm thick & 12mm
polished square rod grills fixed in walls, including glazing clips, handles
etc.complete.
i) Window with Stainless steel friction hinges and Zamac Alloys handle and
receiver fixed to the shutters
ii) Top hung ventilators with Stainless steel friction hinges and Zamac Alloys
handle and receiver fixed to the shutters
iv) Louverd ventilators fixed with Aluminium adjustable louvers to receive 5
mm glass.
iii) Fixed ventilators with block washers to receive glazing material.
ALUMINIUM
Providing & fixing of INDAL, colour anodized ,Aluminium sliding windows
made out of std. Sections two track / three track with 4mm tk. glass fixed in
EDPM gasket, with Al. Beading, SS screw, rubber weather strips, rawl
92 m2
plugs,etc., with the thickness of anodic coating 20 - 25 microns, complete,
complying with relevant standard specification as per detailed drawing and
as directed.
Providing and fixing Aluminium openable door with 5mm float glass, with
novapan 12mm tk. board fixed with EPDM gasket, with INDAL anodised
95 m2 aluminium std. sections with necessary beadings, with SS screws, rubber
weather strips. rawal plugs etc., with thickness of anodic coating 20 to 25
microns complete with relevant standard specification.
Supplying and fixing Aluminium louverd ventilator with 4mm pin headed
glass, fixed with EPDM gasket, with INDAL anodised aluminium std. sections
96 m2 with necessary beadings, with SS screws,
rubber weather strips. rawal plugs etc., with thickness of anodic coating 20 to
25 microns complete with relevant standard specification.
Supplying and fixing Aluminium fixed glazing with 6mm float glass fixed with
EPDM gasket with INDAL anodised aluminium std. sections with necessary
97 m2 beadings, with SS screws, rubber weather strips,rawal plugs etc., with
thickness of anodic coating 20 to 25 microns complete with relevant standard
specification.
ROLLING SHUTTER
Supplying and fixing in position inter locking Rolling Shutter of approved
manufacture, made of 18 gauge, 75mm wide cold rolled MS plate,interlocked
including top cover,spring,axle,guide rails,tees,iron pulleys,bearing, handles
etc.,& shutter locking push & pull arrangements with holding down bolts
98
embedded in cement concrete block of 230 x 230 x 230 in 1:3:6 (1 of cement,
3 of sand and 6 of 20mm & down hard blue granite metal ) well packed
complete, including two coat zinc chromite yellow primer etc., complete as
directed.
m2 With manual pull and push.
m2 With mechanical arrangements for pull and push.(gear type)
1. Hand operated with pull & push type with ball bearing
ELGI VISAGE
Supplying and fixing of ELGI Visage door of approved colour frame with
double glazing ( 6mm plain glass + 20mm gap + 4mm plain glass ) with forex
100 m2 sheet at bottom ( 5mm + 20mm gap + 5mm forex sheet ) with Dr. Hahn hinges
& Ferco lock ( imported ) with door closer of approved make, complete in all
respect.
Supplying and fixing of ELGI Visage fixed glazing of approved colour frame
101 m2 with double glazing ( 6mm plain glass + 20mm gap + 4mm plain glass )
complete in all respect.
Supplying and fixing of ELGI Visage door of approved colour frame with single
glazing ( 6mm plain glass with 5mm forex sheet at bottom with Dr. Hahn
102 m2
hinges & Ferco lock ( imported ) with door closer of approved make, complete
in all respect.
Supplying and fixing of ELGI Visage windows of approved colour frame with
103 m2
single glazing ( 6mm plain glass ) complete in all respect.
PLANT ROOM
Fixing of air tight doors in position and embedded in cement concrete blocks of
size 230x 230x150mm 1:2:4 mix (one of cement,two of sand ,four of hard blue
104 m2
granite metal 20mm & below ) (air tight door will be supplied by the company)
including curing , shuttering etc., complete in all respects.
Fixing of fresh air dampers, return air dampers, exhaust air dampers , return
air filters in position and embedded in cement concrete blocks of size 230x
230x150mm 1:2:4 mix (one of cement
105 m2
,two of sand ,four of hard blue granite metal 20mm & below ) (Dampers will
be supplied by the company) including curing , shuttering etc., complete in all
respects.
Fixing of heavy duty fans of exhaust air & supply air in rcc walls.including
106 m2
curing ,shuttering etc., complete.
WOOD / FLUSH DOORS AND WINDOWS
Supplying & fixing best quality well seasoned country wood (Pillamarudhu or
equivalent) outer frame wrought and put up in position, for doors, windows &
107 m3
ventilators etc., with
moulded corners, chamfers, rebate , mortar grooves etc., complete.
Providing and fixing 38mm thick best Indian countrywood glazed shutters
108 m2 for windows as per drawing with 4mm thick plain glass and putty & teakwood
beading 20 x 20 mm, including fixing, complete as per standard specification.
Supplying & fixing best quality well seasoned country wood (Pillamarudhu or
equivalent) outer frame wrought and put up in position for Louverd ventilators,
109 m2
with 5mmtk pin head glass as per design, incuding cost of all material and
labour charges etc., complete .
Supplying & fixing best quality well seasoned country wood (Pillamarudhu or
equivalent) outer frame wrought and put up in position for Windows, with
38mm thick country wood glazed shutters as per drawing with teak wood
110 m2
beading 20x20mm, incuding cost of shutter frame etc., with necessary fittings,
holdfasts, iron iodised hinges, aluminium anodised tower bolts, cadmium
plated screws etc., complete as per standard specification.
Supplying & fixing best quality well seasoned country wood (Pillamarudhu or
equivalent) outer frame wrought and put up in position for Windows ,
including necessary moulded corners, chamfers, including providing and
fixing 38mm thick best Indian countrywood glazed shutters and M.S safety
111 m2
grills out of 12mm polished square rods and flats as per design, rivetting, or
welding and fitting on wooden frames or walls as required and with 4mm thick
plain glass and putty & teakwood beading 20 x 20 mm, including fixing,
complete as per standard specification.
Providing and fixing 30mm thick commercial hot pressed flush doors of "Kutty"
or equivalent approved make with 6mm teak wood lipping allround,single or
double leaf synthetic resin bound,external lipping of best Indian Teak wood
batten 10mm tk single piece in each edge with 4"x3" Teak wood outer
frame (Good quality, well seasoned )with moulded corners and chamfers, fixed
112 m2
in masonry wall with holdfasts embedded in cement concrete blocks
230x230x230mm size in 1:3:6 (one part of cement, three parts of sand and six
parts of granite metal 20mm below) well packed etc., complete with necessary
fittings, holdfasts, iron iodised hinges, aluminium anodised tower bolts,
cadmium plated screws etc., complete as per standard specification.
Providing and fixing 38mm thick commercial hot pressed flush doors of "Kutty"
or equivalent approved make with 6mm teak wood lipping allround,single or
double leaf synthetic resin bound,external lipping of best Indian Teak wood
batten 10mm tk single piece in each edge with 4"x3" Country wood outer
frame(Pillamaruthu or equivalent-Good quality, well seasoned )with moulded
113 m2 corners and chamfers, fixed in masonry wall with holdfasts embedded in
cement concrete blocks 230x230x230mm size in 1:3:6 (one part of cement,
three parts of sand and six parts of granite metal 20mm below) well packed
etc., complete with necessary fittings, holdfasts, iron iodised hinges,
aluminium anodised tower bolts, cadmium plated screws etc., complete as per
standard specification.
Providing and fixing 38mm thick panelled door 6"x4" Teak wood outer
frame(Good quality well seasoned ), fixed in masonry wall with holdfasts
embedded in cement concrete blocks 230x230x230mm size in 1:3:6 mix (one
part of cement, three parts of sand and six parts of 20mm & below granite
114 m2
metal ), well packed etc., complete including ,cost of necessary fittings,
holdfasts, iron idodised hinges, aluminium anodised tower bolts, cadmium
plated screws with necessary carving work for frames and shutters etc.,
complete as per standard specification.
Supplying & fixing best quality FRP coated wooden frames with wooden flush
door with 38mm thick shutters of required size , single or double leaf , outer
frame fixed in masonry wall with holdfasts embedded in cement concrete
blocks 230x230x230 mm size in 1:3:6 mix(one part of cement, three parts of
115 m2
sand and six parts of 20mm& below granite metal ) well packed etc., complete
including necessary fittings, holdfasts, iron iodised hinges, aluminium
anodised tower bolts, cadmium plated screws etc., complete as per standard
specification.
Supplying & fixing of PVC door frames and shutters of approved color and
116 m2 make for toilet, including cost of necessary fittings , hold fasts and labour
charges for fixing , packing, etc., complete.
Supplying & fixing of Fibre Reinforced Plastic Polymer (FRP) door frames and
117 m2 shutters including cost of necessary fittings ,hold fasts and labour charges for
fixing ,packing ,etc., complete.
Supplying & fixing of PVC coated wooden flush doors, frames and shutters,
118 m2 including cost of necessary fittings ,hold fasts and labour charges for fixing
,packing ,etc., complete.
HANDRAILS
Providing and fixing of stair balustrade using 40x30x16G pipe and 40x6 mm
flat with teak wood top hand rails (4" x3") & center plank 6" x 1.5", including
119 m2
welding, with two coat zinc chromate yellow primer ,two coat enamel painting
and melamine polish for handrails.etc., complete. (Refer Drawings).
Providing and fixing of wall rails using 40x6 mm flat , welded with 12mmdia
rod, one end fixed to the wall and top railing with teak wood handrails,
120 Rmt
including welding , with two coat zinc chromate yellow primer ,two coat enamel
painting and melamine polish for handrails.etc. complete. (Refer Drawings)
Providing and fixing TEAK WOOD for handrails top, welded with 25mm
square tube @ 250mm c/c and bottom splited and vertically
121 m2
grouted in concrete including welding ,labour charges etc.,complete (height of
hand rails 0.9m).
Providing and fixing 60X40mm M.S pipe for handrails , welded with 20mm
square tube @ 500mm c/c and bottom splited and vertically grouted in
122 m2
concrete including two coat of zinc chromate yellow primer, welding ,labour
charges etc., complete, height of hand rails 0.9m ( refer drwg. )
GENERAL
Providing & fixing of 4mm thick plain glass for windows in country wood
frames ( excluding frame cost ) with necessary teak wood beading, fixtures
123 m2
and labour charges etc., complete.(size of opening will be measured for
payment)
Supplying and fixing of North light glazing using Aluminium sections and 6mm
wired glass of approved make as per standard specifications with glazing
125 m2
clips, necessary beading including
necessary screws, all as per detailed drawings and as directed.
Supplying and fixing of RCC jally work of approved design with relevant
126 m2
standard specs.
Providing & fixing holdfasts of 380mm x 30mm x 6mm size ,75 mm bended at
127 Nos both ends with one end fixed in wooden frames with three screws of size
38mm and other end to the wall.
Fixing of strong room special door in concrete wall including labour charges
128 m2
for packing,finishing etc., complete in all respects.
Supplying and fixing of grill door using 12mm square rods and 18 SWG MS
129 m2
sheet , including MS angles as frames etc., complete as per design.
Supplying and fixing MS Grill out of 12 mm square rods and flats as per
130 kg
design, rivetting, or welding and fitting on wooden frames or walls as required.
Providing and laying plain cement grout in C.M. 1:2 including curing,
5
preparation of surface etc.
5 mm x 25 mm size
6 mm x 30 mm size
8
Providing & fixing in position anchor fasterners in concrete of Hilti / fisheman
make & quality & fixing them in position at correct location, lines and levels as
per manufacturers specifications & as directed & instructed by
Engineer/Owner including making good the concrete/masonry surface after
inserting the fastener.
Supplying and Fixing of 20mm dia Bed bolt and 400 Anchorage including cost
9
of all materials, labour charges for fixing etc., all complete
Design, supply BHP imported make,sandwich type, high tensile, bare 0.55mm
TCT galvalume top roof sheeting standing seam type having 150 GSM Zinc
coating with composition of 55 Al. % and 43.5 %Zinc ,1.5% silicon having
yield strength of 550MPA 50mm thk. insulation fibre glass between two sheets
11 having density 24 kg/m3 reinforced with aluminium foil backing with Bottom
sheet of 0.45 mm thk. shall be prepainted high tensile galvalume. The sheet
have actual width of 1006mm and covered with 930mm with 32mm crest,
186mm pitch c/c and special return leg.(Sheets made by BHP or Blue scope
steel international or equivalent)
Design preparing shop drawing supply & fixing colour coated ridges made
from 0.55mm TCT GI (total coated thickness), 345 MPA yield stress , Overlaps
/ end laps sealed with neutral cure silicon sealants with self tapping screws
No. 12 x 15 x 55mm of mechanically drivers galvanised screws with integral
12
moulded nylon washers heads and EPDM seals (One fastener on each crest),
Silicon sealants for air tightness, Polysulphide sealants for gable flashings,
measurement for the purpose of billing will be based on actual installed area
(net of overlap)
Providing & fixing G.I. flashing with 22g GI sheets i/c necessary bolts, washers
14 hardware etc. as shown on drawing and complete as directed and instructed
by Engineer/ Owner
Supplying, delivering and fixing PVC (4.0 kg/cm2) rainwater down take pipes
of approved make i/c intake grills, bends, offsets, shoes,M.S. supports,clamps
15 etc, jointing with solvent cement all necessary accessories conforming to IS-
4985, testing, rectification complete as directed and instructed by
Engineer/Owner. (M.S. support shall be measured seperately)
a) 100 mm dia.
Providing, fabricating to required profile size & shape MS Gutter made out of
17
2mm sheet
Providing & laying R.C.C. Hume pipe NP2 class I/c collars and jointing with
C.M. 1:3 mixed curing etc complete for road crossing etc complete for road
18 crossings, drainage etc. at required lines,levels, and gradient.
(Excavation,backfilling PCC/RCC and encasing concrete shall be paid
separately under relevant item)
a) 300 mm dia.
STEEL LADDER/STAIRCASE
Fabricating & erecting in position of structural steel work for steel staircase
using standard Rolled sections and plates as per approved
designs, including welding, with welding electrodes of approved make, with
131 mt
one coat of first quality zinc chromate primer ,including transportation,
hoisting, labour charges etc. complete. (Rate inclusive of 25mm dia square
tubes as verticals for handrails & top welded with 40mmdia MS pipes).
Fabricating & fixing steel ladder, hand rails and floor grills by using MS angles
,tubes, pipes RTS rods (mfd as per architect's design)
132 kg
including welding joints with proper alignment and one coat primer, etc.,
complete.
GATE
Supplying and fixing of MS gate with standard square rods, tubes & sheets
jointed, mitred & electrically flush welded and embedded in RCC column as
133 kg per Architect's design and drawings, including one coat of red oxide primer of
approved quality and providing locking arrangements etc., complete in all
respects.
VII.STEEL
Fabricating of steel for reinforced concrete works in all heights including
straightening, cleaning, cutting,bending,hoisting providing overlaps, tieing in
134 Mt
position for all works, as per detailed drawings supplied with relevant std
specs.(including cost of binding wire).
VIII.PLASTERING
Ceiling plastering with Cement Mortar 1:3 (one of cement, three of sand) for
135 12mm thickness finished smoothly for required level including scaffolding,
curing, etc., complete.
m2 Stage - I ( Upto Basement level ).
m2 Stage - II ( Basement to 3.25m level ).
m2 Stage - III ( 3.25m to 6.50m lvl)
m2 Stage - IV ( 6.50m to 9.75m lvl)
m2 Stage - V ( above 9.75m level ).
Ceiling plastering with Cement Mortar 1:3 (one of cement, three of sand) for
136 12mm thickness finished smoothly with cement slurry for required level
including scaffolding, curing, etc., complete.
m2 Stage I ( Upto Basement level ).
m2 Stage - II ( Basement to 3.25m level ).
m2 Stage III ( 3.25m to 6.50m lvl)
m2 Stage IV ( 6.50m to 9.75m lvl)
m2 Stage - V ( above 9.75m level ).
Ceiling plastering with Cement mortar 1:3 (one of cement, three of sand) for
12mm thickness finished smoothly with cement slurry for required level
137
including scaffolding, curing, with water proofing compound, (FOSROC or
equivalent approved make-dosage as per manufacturer specs.)etc., complete.
Wall plastering for brick work with Cement Mortar 1:5 (one of cement,five of
138 sand ) for 12mm thickness finished smoothly including scaffolding, curing etc.,
complete.
Size Stone Masonry plastering with Cement Mortar 1:5 (one of cement, five
140 m2 of sand ) for 15 to 20mm thickness finished smoothly to one level including
scaffolding,curing etc., complete for all levels.
Size stone masonry wall plastering with Cement Mortar 1:5 (1 of cement, 5 of
141 sand) for 15 to 20mm thickness finished smoothly with Cement
slurry,including scaffolding,curing etc., complete.
m2 Stage I : Upto basement level.
Plastering for RCC surface with Cement Mortar 1:4 (one of cement, four of
142 sand ) for 12mm thickness finished smoothly to one level including scaffolding,
curing etc., complete.
m2 Stage I ( Upto Basement level ).
m2 Stage - II ( Basement to 3.25m level ).
m2 Stage III ( 3.25m to 6.50m lvl)
m2 Stage IV ( 6.50m to 9.75m lvl)
m2 Stage - V ( above 9.75m level ).
Plastering for RCC surface with Cement Mortar 1:4 (one of cement, four of
143 sand ) for 12mm thickness finished smoothly to one level with water proof
compound, cement slurry including scaffolding, curing etc., complete.
Providing plastering (max. 12mm tk.) over bare brick walls / aerocon block
144 m2 walls, using QED vermiculate plaster without cement and sand mixture etc.,
complete.
Providing lath plastering(chicken mesh plastering) with CM 1:3 ( 35mm tk.) for
145 m2 fins, both sides finished smoothly to one level including scaffolding,curing
etc.excluding cost of reinforcement involved,complete in all levels.
Hollow block pointing in CM 1:4 after racking the joints min.6mm deep,
146 m2
including scaffolding, curing etc., complete.
SS Masonry wall pointing with cement mortar 1:4 (one of cement , four of
147 m2
sand) for neatly finishing including curing, scaffolding, etc.,
Stucco plastering for brick work / RCC surfaces with cement mortar 1:2:4 (one
148 m2 of cement,two of sand,four of 6mm chips)for 12 mm thickness , finished neatly
,including scaffolding ,curing etc., complete for all levels.
Providing and doing cement plaster at all floors, locations& level in C.M 1:4
mix to all RCC & masonry work I/c grooves bands, drip moulding, scaffolding,
watering, hacking out joints in masonry or concrete work as per specification.
149
The rate to include providing & fixing of 150 mm wide chicken wire mesh of 26
G thickness & 15 mm mesh size at the junction of different construction
materials.
Extra over 601006a,b &c above but for providing coving of 25mm radius in
d)
plaster at junctions (wall & wall and wall & ceiling )
Providing & doing 230 thk. dry rubble stone packing under floor, foundation,
steps, ramps & other similar locations,hand set vertically in regular lines,
interstices filled in with smaller stone chips including watering & consolidating
150 & finishing to the required levels & lines etc. with the use of 10 ton roller on
with mechanical rammer & with manual tampering only at location where
mechanical rammer cannot be moved complete as directed. (Binding layer
shall be of metal and voids to be filled with sand/murrum).
IX.PAINTING
Providing and painting one coat of Kottayam or JK brand or Birla white cement
149 m2 including cost of all materials and labour, curing, brushes etc., complete in all
levels.
Providing and painting two coats oil bound distemper ( for walls) of approved
153 m2 make and quality and colour, including cost of all materials and labour,
scrapping, curing, brushes etc., complete for all levels.
Providing and painting enamel paint two coats of approved make and quality,
by brush, for doors, windows, ventilators,grills etc., including scrapping,
154 m2
finishing neatly, etc., complete (shade & quality to be approved by architect)
inclusive of all labour charges, brushes etc.,
Providing and finishing with plaster of paris full putty including material cost,
155 m2
labour for scrapping, applying, finishing neatly etc.with one coat of primer.
Providing and finishing with 'ALTEK' putty including material cost, labour for
156 m2
scrapping, applying, finishing neatly etc.,
Providing and Finishing with chalk powder putty including material cost ,labour
157 m2
for scrapping, finishing neatly etc.,
Providing & Finishing plastered surface with Berger putty with one coat
158 m2 primer including material cost, labour forscrapping, applying, finishing neatly
etc.,
Providing & Finishing plastered surface with RJ london full putty including one
159 m2 coat plastic emulsion,material cost,labour for scrapping,applying,finishing
neatly etc., all levels
Preparing surface and painting with two coats of enamel paint 3" height for
160 Rmt
skirting including brushes ,labour charges etc., complete.
Preparing surface and painting with two coats of Terra cotta paint for grooves
161
& sunshade including brushes,labour charges etc., complete.
Rmt 40mm width
Rmt 100mm width
Preparing surface and painting with two coats of Terra cotta paint for
162 m2 weathering course tiles and for wall grooves including brushes, labour charges
etc., complete.
Providing Melamine polish or equivalent polish for teak wood joineries
including scrapping, finishing neatly, etc., complete, of approved quality (shade
163 m2
& quality to be approved by architect) inclusive of all labour charges, brushes
etc., complete.
Providing painting two coats of enamel paint to steel ladder and hand rails
164 Mt inclusive of all labour charges, brushes etc., complete (Quantity will be
measured as tonnage of painted members)
Providing and painting two coats of Grey cement wash of approved make
165 m2 and quality, including cost of all materials and labour, scrapping, curing,
brushes etc., complete for all levels.
Preparing surface and painting with two coats of enamel paint 3" height for
166 m2
skirting including brushes ,labour charges etc., complete.
Providing & applying three coats of approved white wash/colour wash (by
brush) with fevicol DDL to plastered surfaces of wall and concrete work
167 (internal walls &ceilings) including rubbing with sand paper, scaffolding
etc.complete & as per specifications & as directed & instructed by
Engineer/Owner (using Apcolite / Noble stainers)
Providing & applying minimum two coats of approved shade of cement based
paint "Snowcem" or equivalent approved make over one coat of cement
primer to all external surfaces of plastered work or concrete incl. Scaffolding,
168
cleaning the surfaces, curing etc. complete as per manufacturers
specifications & as directed by Engineer/ Owner. For payment area, shall be
measured as per Ht. x Width surface are only.
X.GENERAL
Damp proof course in cement mortar 1:3 (1 of cement 3 of sand) for 20mm
167 m2 thick laid to spirit level mixed with crude oil,( 5% by weight of cement used),
including curing etc., complete in all respects.
Alround pavement 75mm tk precast slab in RCC 1:2:4 mix over 100mm thick
169 m2 sand cushion including necessary shuttering, laying, labour charges, curing
etc., complete, but excluding cost and fabrication of reinforcement steel.
Spreading hard blue granite soling of size not exceeding 150mm including
170 m2 watering, rolling with Hard Roller for 150mm tk,. Filling voids with sand and
again rolling and consolidated with Hard Roller etc., complete.
Packing of purlin angles above masonry wall with M20 cement concrete
171 Nos
,including aligning to a straight line and levelling etc,complete.
Supplying and fixing of saltex board 25mm thick for expansion joints ( vertical
172 m2 and horizontal ) including labour charges etc., complete with relevant standard
specifications.
Providing and fixing of chicken mesh 24 gauge at the junction of RCC beam,
173 m2
column & brick joints.
Groove cutting the vacuum dewatered flooring for a size of 6mm x 20mm and
174 Rmt
filling the groove with polysulphide sealant.
Fixing of Edge angles for edges of opening and platform area including
176 kg cutting, welding with lug angles, aligning including the cost of electrodes of
qood quality etc., complete.
Providing PVC Water bar of approved make 230mm ht. for R.C.C. Works in
178 Rmt
water tank,including all materials and labour charges etc.complete.
Brick on edge for sunshade, portico & canopy slab with first class bricks in
179 Cement Mortar 1:5 ,including cost of all materials and labour for all levels
( Height Includes slab thickness).
Stage - II ( Basement to 3.25m level ).
Rmt 200mm height
Rmt 300mm height
Stage III ( 3.25m to 6.50m lvl)
Rmt 200mm height
Rmt 300mm height
Rain water border using same mix of plastering for sunshades, portico slab,
180 canopy, rain water gutter etc., of size 25mm x 6mm including all labour and
scaffolding, curing etc., complete.
Rmt Stage - II ( Basement to 3.25m level ).
Rmt Stage III : 3.25m to 6.50m level.
Rmt Stage IV : 6.50m to 9.75m level.
Elevation border using same mix of plastering for sunshades , portico slab,
181 rain water gutter etc., of size 50x20mm including all labour and scaffolding,
curing etc., complete.
Rmt Stage - II ( Basement to 3.25m level ).
Rmt Stage III : 3.25m to 6.50m level.
Rmt Stage IV : 6.50m to 9.75m level.
Coping wall border using same mix of plastering of size 75 x 12mm thick
182
including all labour and scaffolding, curing etc., complete.
Rmt Stage III : 3.25m to 6.50m level.
Rmt Stage IV : 6.50m to 9.75m level.
Elevation border (one round,one cutting ) for sunshade using same mix as
184 Rmt that of plastering for sunshades , portico slab, canopy, rain water gutter etc.,
including all labour charges and scaffolding, curing etc., complete.
Providing border around the black board in Cement Mortar 1:3 mix
185 m3 Supply & filling of 150 to 200mm thick boulders for dispersion trench.
Supply & filling of 40mm thick well graded Coarse aggregate for dispersion
186 m3
trench.
Water proof coating over RCC surface with 2 coats of Masterseal 501 ( Mfd.
187 m2 by Degussa MBT) after thoroughly cleaning the surface etc., complete as per
std. specification.
Providing and applying with Polysulphide sealent ( Tech seal ) of size 1" x 2"
for expansion joints, the existing surface should be clean thoroughly without
188 Rmt dust,dirt,oil grease and loose particles.
Before applying the sealent primer should be apply on expansion joint both
sides.
Supplying & fixing of PVC rain water pipe, 4 kg/cm2, of approved make with
shoes, bends, swan necks, off-sets, steel clamp (1.5" W x 0.25tk.) plastic
189 rawl plugs of approved quality, including GI grating at the junction of the
parapet and floor, finishing and making the entrance smooth and curved
etc., complete.
Rmt 150mm Pipe
Rmt 100mm Pipe
Providing PVC 40mm dia rain water spouts in sunshades and canopy slabs
190 Nos
including making a wide and smooth curve for water flow etc., complete.
Suppying & fixing of 2" dia. PVC pipe with end cup over bolts to protect bolts
191 each
provided in RC brackets provided for future expansion.
Providing and finishing the top of brick jelly with one course of hydraulically
pressed tiles of superior quality of size 230x230 mm, laid over cm 1:4 to
192
required slope, pointed neatly with same mortar mixed with crude oil 5% the
weight of cement used etc complete ( including corner tiles).
Providing and finishing the top of brick jelly with sloped roof elevation tiles of
superior quality & approved design laid over cm 1:4 to required slope pointed
193 m2
neatly with red oxide & mixed with same mortar and crude oil 5% the weight of
cement used etc.
194 Nos Supplying & fixing of 16mm dia lifting hooks in RCC roof slab etc.,
Making and finishing of Pneumatic and slit opening in the trench cover slab
195 each
and edge finishing with CM 1:4 etc., complete (Area upto 0.30 m2).
Fabricating & fixing of cable racks using MS angles in position packing with
196 kg cement concrete 1:2:4 including aligning to a straight line and complete.
(Refer Drawing).
Providing and fixing of chicken mesh 24 gauge for exhaust fan , cone shaped
197 m2 with finishing in cm 1:3 ( one part of cement, three parts of sand) with cement
slurry finish including fabrication, curing etc., complete.
Providing & fixing the Urinal partition of approved quality 20mm tk. marble slab
in the range of Rs. 90/sft( color approved by architects/client) and fixing one
198 m2
end to the wall and packing the marble slab and curing, cutting, grinding,
joining, polishing etc., complete in all respects.
Supplying and spreading of LD Polythene sheet (white transparent) with the
thickness of 600 microns over the top surface of flooring concrete including
199 m2
overlaping jointing with tape of 600 microns, labour charges etc., complete
complying with relevent standard specifications.
Providing & fixing holdfasts of 380mm x 30mm x 6mm size ,75 mm bended at
200 Nos both ends with one end fixed in wooden frames with three screws of size
38mm and other end to the wall.
Providing pocket holes for generator bed ( size 0.15m x 0.15m x1.00m)
201 Nos including packing with 'Conbextra ' GP2 grouting etc., complete with std.
specification.
Erecting the Fencing,using pre cast R.C.C post and G.I Chain link tying
202 Rmt with G.I wire, earth work,fixing of R.C.C post , tying , binding aligning etc
including providing cross support at intervals of 40'0"and at corners etc.
Providing pocket holes for bed bolts to the required size using plugs and
grouting the same after fixing the bolts and base plates with CC 1:1.5:3 ( 1 of
203 Nos cement 1.5 of sand 3 of 6mm and below chips mixed with suitable admixtures
and finishing the surface and curing etc., complete ( templates will be supplied
by the fabricator )
Erecting the Fencing,using pre cast R.C.C post and G.I Chain link tying
205 Rmt with G.I wire, earth work,fixing of R.C.C post , tying , binding aligning etc
including providing cross support at intervals of 40'0"and at corners etc.
Providing pocket holes for bed bolts to the required size using plugs and
grouting the same after fixing the bolts and base plates with CC 1:1.5:3 ( 1 of
206 Nos cement 1.5 of sand 3 of 6mm and below chips mixed with suitable admixtures
and finishing the surface and curing etc., complete ( templates will be supplied
by the fabricator )
207 Nos Providing grating holes in ceramic /kotah slab flooring and wall.
Providing and fixing Pre- cast slabs 50 mm Tk.(Thickness includes top finish)
208 m2 in brick walls for shelves including proper levels, smooth finishing the top &
edges at all levels etc.,complete.
Providing and fixing a single bowl stainless sink with drain board and good
209 Nos
quality chromium plated brass taps(quality to be apporved by architect).
Providing and fixing a single bowl stainless sink with drian board and good
210 Nos
quality chromium plated brass taps(quality to be apporved by architect)
Providing and fixing MS Chamber cover with 6mm plate and frame
221 25x25x5mm ISA and 25x10mm MS Plate for stiffner including one coat of
primer and finishing charges etc., complete.
Nos 610 x 610 mm size
Nos 460 x 460 mm size
Nos 300 x 300 mm size
222 Nos Supplying and fixing of C.I foot rests for steps in RCC wall.
Dismantling of stone masonry in all levels including removing the debris and
227 m3
disposing it upto 30m and cleaning the area.
XI.STRUCTURAL WORKS
Erecting in position of structural steel work for Purlins ,tie runner, false ceiling
runner ,cat walk ,sleeve using cold Rolled sections & plates, excluding cost of
234 Mt bolts, nuts of approved make(HT Gr.8.8 of TVS/Unbrako), including bolting ,
cost of hoisting ,labour charges etc.,complete. (excluding cost of one coat of
first quality zinc chromate yellow primer )
Fixing of Sag rods of 12mm dia. and threading on bothends excluding the
235 Mt cost of bolts and nuts, with necessary washers, including one coat of zinc
chromate yellow primer etc.,complete.
Fabricating and erecting of 6mm/ 8mm thick chequered plate and supporting
236
channel for trench covering.
Mt Chequrered plate
Mt Supporting channel
Fabricating and erecting of ISMB, ISMC & square bar sections for gantry
girder including welding or bolting with all necessary bolts and nuts, including
237 Mt cost of welding electrodes of approved make ,excluding cost of bolts, with one
coat of first quality zinc chromate primer & transportation, hoisting labour
charges etc., complete
Supplying & fixing of GKW or its equivalent Bolts and nuts for fixing purlins
238 kg
and cleats etc.,
Bolt specification by Sakthivel
A C sheet roofing/cladding with fully corrugated sheets (side lap one and half
times corrugation) including PVC Coated 'J' bolts with Neoprene
239 m2
washers,PVC Caps etc.including two coats of shell lime at the bottom of sheet
with all conveyance, cutting charges etc.,complete.
A.C serrated adjustable ridge pairs including "J" bolts with necessary washers
240 m2
etc. complete.
A.C barge board including 'J' bolts and nuts , necessary washers etc.,
241 Rmt complete
Aluminium sheet 22 gauge ridge piece with Aluminium J bolts with all
243 Rmt
conveyance, cutting charges etc., complete.
Tufflite sheet roofing ( 2mm thick opaque white colour sheet) fully corrugated
244 m2 including 'J' bolts with washer etc., with all conveyance, cutting charges etc.,
complete.
Tufflite sheet ridge pieces including 'J' bolts with nuts and necessary
245 Rmt
washers, etc., complete.
Galvalume sheet ridge piece with self drilling screws with all conveyance,
247 Rmt
cutting charges etc., complete.
Removing of existing A C sheet including J' bolts with necessary washers
248 m2
with all conveyance,cutting charges etc.,complete.
Re-fixing of existing A C sheet (side lap one and half times corrugation)
249 m2 including 'J' bolts with necessary washers including one coat of shell lime at
the bottom of sheet with all conveyance, cutting charges etc.,complete.
Providing & fixing north light glazing with aluminium glazing bar, 6mm thick
250 m2
wired glass with all necessary fixtures etc., complete as per drawing.
Supplying & Fixing A.C. half round gutters with necessary outlets, including
252 Rmt
clips,unions etc., complete.
Supplying and fixing A.C. rain water pipes 4" dia including clips,unions etc.,
253 Rmt
complete.
Providing and painting Two coats of aluminium paint to steel trusses &
254 Mt columns inclusive of all labour charges, brushes etc., complete (Quantity will
be measured as tonnage of painted members)
Providing and painting Two coats of Enamel paint (Squireel grey or smoke
grey) of Asian/Berger/ICI/ Approved make to steel trusses & other steel
255 Mt
members, inclusive of all labour charges, brushes etc., complete (Quantity will
be measured as tonnage of painted members)
Providing& painting aluminium paint to cold rolled steel Purlins ,tie runner,
256 Mt false ceiling runner, cat walk ,sleeve inclusive of all labour charges, brushes
etc., complete (Quantity will be measured as tonnage of painted members)
Two coat
Preparing surfaces of structural steel using sand blasting to remove dust and
257 Mt
rust before applying primer.
Fabricating, welding and/ or bolting, as required, erecting and fixing in
position all types of structural steel works viz columns
beams,monorails,rafters,trusses,purlins,frame for louvers,bracing, equipment
supports. ladders & cage ladders,sag rods pipe & cable racks, pipe bridges,etc
(except checkered plates,grating & pipe railing only) made up of rolled or built
up sections with moment or shear connections, shop/site fabricated including
91 all accessories viz nuts, bolts, cleats,gussets, suspenders etc as per
specification complete as directed by Engineer/Owner. The rate to include for
welding weights,site connection, nut & bolts, scaffolding, working platform, etc
and same will not be measured for payment.(Painting & sand blasting shall be
paid separately under relevant item.) The rate shall include for preparing &
providing detailed fabrication drawings based on design drawings & getting the
same approved from the Engineer/Owner.
Providing & painting to structural steel work with primer & paint of approved
quality & make including preparation of surface as & make including
preparation of surface as manufacturer specification and including scaffolding
etc all complete as directed & instructed by Owner/Engineer. Thickness of
each coat of primer and paint and application shall be as per approved paint
manufacturer's specifications(Rate shall include cost of supply of paint)
One shop coat of red oxide zinc chromate primer including preparation of steel
surface to the requirement of paint manufacturer's speciication.
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m2
m2
m2
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m2
m2
m2
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m2
m2
m2
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m2
m2
m2
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
Rmt
m3
m3
m3
m3
m3
m3
m3
m3
m3
m3
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m3
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m3
m3
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m3
m2
m2
m2
Rmt
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
m2
m2
m2
m2
m2
m2
m2
Rmt
Rmt
Rmt
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
sqm
sqm
sqm
m2
m2
Each
Each
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m3
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
Rmt
m2
m2
m2
m2
m2
m2
Nos
m2
m2
kg
RM
mt
kg
kg
Mt
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
m2
Rmt
Rmt
Rmt
m2
m2
Mt
m2
m2
m2
m2
m2
m2
No
m2
m2
Rmt
No
kg
m2
m2
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
Rmt
m3
m3
m2
Rmt
Rmt
Rmt
Nos
Each
m2
m2
m2
No
each
kg
m2
m2
m2
No
No
Rmt
No
m2
Rmt
No
No
m2
No
No
m2
No
No
No
No
No
No
No
No
No
No
Rmt
No
No
No
No
No
No
No
No
kg
m3
m3
m3
m3
m2
m2
No
No
No
No
No
No
No
No
Mt
Mt
Mt
Mt
Mt
Mt
kg
m2
m2
Rmt
m2
m2
Rmt
m2
Rmt
m2
Rmt
m2
m2
m2
Rmt
Rmt
Rmt
Mt
Mt
Mt
Mt