Professional Documents
Culture Documents
Rendered to:
Rendered to:
Test Methods: The test specimens were evaluated in accordance with the following methods.
ASTM D 543-14, Standard Practices for Evaluating the Resistance of Plastics to Chemical
Reagents. (Practice A - Procedure I, Immersion with Weight and Dimension Changes).
ASTM D 4060-14, Standard Test Method for Abrasion Resistance of Organic Coatings by the
Taber Abraser.
Test Procedures and Test Results: The test procedures and test results are reported below.
For the reagent testing (ASTM 543-06, Practice A), twelve specimens were received with ready
to test dimensions measuring nominally 1" wide by 2" long. Four reagents were used for
testing the Tuff Coat UT-100F non-skid coating samples (Hydrochloric Acid (10%), Nitric Acid
(10%), Sulfuric Acid (Concentrated), & Jet Fuel (jp-4c.). Three specimens were assigned to each
reagent. Each specimen weight was measured using a Mettler Toledo digital scale
(ICN: 65216). Specimen thickness, length and width dimensions were measured using a Digital
Caliper (ICN: 324). The exposure specimens were suspended inside a glass jar containing the
reagent. The specimens were exposed to the reagent for seven days at standard laboratory
temperature 70ºF ±4º. After the exposure period, specimens were re-weighed and
dimensionally inspected for comparison to pre-exposure values. For the abrasion testing
(ASTM D 4060-14), specimens were placed on a Taber Abraser Machine (ICN: Y001522), which
applied a constant downward force of 1000 grams to each of two Calibrase CS-10 Taber
Industries abrasive wheels, while the instrument recorded the number of wear cycles
completed by the sample, as it rotated below the wheels. Each specimen was evaluated after
1,000 cycles of abrasion by weight measurement and visible wear through. The samples were
4" square by nominally 3/8" thick specimens. (See photos in Appendix A). Individual test results
are reported in the following tables.
Product ID Start
Abrasion End Mass
Mass Observations
Tuff Coat UT-100F Cycles (gram)
(gram)
Non-Skid Coating
Surface Coating Wear Through
1 1,000 56.3 56.0
0.5 % Loss of Mass
Surface Coating Wear Through
2 1,000 63.8 63.5
0.4 % Loss of Mass
Surface Coating Wear Through
3 1,000 68.0 67.7
0.4 % Loss of Mass
E8672.01-106-31
Page 5 of 6
Intertek-ATI will service this report for the entire test record retention period. Test records that
are retained such as detailed drawings, datasheets, representative samples of test specimens,
or other pertinent project documentation will be retained by Intertek-ATI for the entire test
record retention period.
Results obtained are tested values and were secured using the designated test methods. This
report does not constitute certification of this product nor an opinion or endorsement by this
laboratory. It is the exclusive property of the client so named herein and relates only to the
specimens tested. This report may not be reproduced, except in full, without the written
approval of Intertek-ATI.
For INTERTEK-ATI:
REH:jmb/kf
Attachments (pages) This report is complete only when all attachments listed are included.
Appendix A - Photographs (1)
E8672.01-106-31
Page 6 of 6
Revision Log
This report produced from controlled document template ATI 00231, revised 04/13/15.
E8672.01-106-31
APPENDIX A
Photographs
E6872.01-106-31
Photo No. 1
Tuff Coat UT-100 Samples, Pre-Test ASTM D 4060
Photo No. 2
Tuff Coat UT-100 Samples, Post -Test ASTM D4060