Professional Documents
Culture Documents
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
MPSH10 / MMBTH10
MPSH10 MMBTH10
E
C TO-92
E B
B SOT-23
Mark: 3E
NPN RF Transistor
This device is designed for use in low noise UHF/VHF amplifiers,
with collector currents in the 100 µA to 20 mA range in common
emitter or common base mode of operations, and in low frequency
drift, high output UHF oscillators. Sourced from Process 42.
OFF CHARACTERISTICS
V(BR)CEO Collector-Emitter Sustaining Voltage* IC = 1.0 mA, IB = 0 25 V
V(BR)CBO Collector-Base Breakdown Voltage IC = 100 µA, IE = 0 30 V
V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 3.0 V
ICBO Collector Cutoff Current VCB = 25 V, IE = 0 100 nA
IEBO Emitter Cutoff Current VEB = 2.0 V, IC = 0 100 nA
ON CHARACTERISTICS
hFE DC Current Gain IC = 4.0 mA, VCE = 10 V 60
VCE(sat) Collector-Emitter Saturation Voltage IC = 4.0 mA, IB = 0.4 mA 0.5 V
VBE(on) Base-Emitter On Voltage IC = 4.0 mA, VCE = 10 V 0.95 V
Typical Characteristics
100 0.2
VCE = 5V
β = 10
80
0.15
125 °C
60
125 °C
25 °C 0.1
40 25 °C
20 - 40 °C 0.05 - 40 °C
0
0.1 0.2 0.5 1 2 5 10 20 50 0.1 1 10 20
I C - COLLECTOR CURRENT (mA) I C - COLLECTOR CURRENT (mA)
1 1
β = 10 VCE = 5V
0.9
0.8
0.8 - 40 °C - 40 °C
25 °C
0.7 25 °C
0.6
125 °C
0.6 125 °C
0.5 0.4
0.4
0.3 0.2
0.1 1 10 20 0.01 0.1 1 10 100
IC - COLLECTOR CURRENT (mA) I C - COLLECTOR CURRENT (mA)
10
PD - POWER DISSIPATION (mW)
250 SOT-23
TO-92
200
1
150
100
50
0.1 0
25 50 75 100 125 150 0 25 50 75 100 125 150
o
T A - AMBIENT TEMPERATURE ( ° C) TEMPERATURE ( C)
MPSH10 / MMBTH10
NPN RF Transistor
(continued)
VCE = 10V
80 10 I C = 5 mA
g ib
40 VCE = 10V 8
0 I C = 5 mA
6
b ob
-40 4
-80 b ib 2 g ob
-120 0
100 200 500 1000 100 200 500 1000
f - FREQUENCY (MHz) f - FREQUENCY (MHz)
120 8
b fb VCE = 10V
80
I C = 5 mA
6
40
0 4
3
g fb -b rb
-40
VCE = 10V 2
-80 I C = 5 mA
-g rb
-120 0
100 200 500 1000 100 200 500 1000
f - FREQUENCY (MHz) f - FREQUENCY (MHz)
MPSH10 / MMBTH10
NPN RF Transistor
(continued)
VCE = 10V
VCE = 10V
20 I C = 2 mA 5 I C = 2 mA
g ie
16 4
b oe
12 3
b ie
8 2
4 1
g oe
0 0
100 200 500 1000 100 200 500 1000
f - FREQUENCY (MHz) f - FREQUENCY (MHz)
60 1.2
VCE = 10V
VCE = 10V
40 g fe I C = 2 mA 1 I C = 2 mA
20 0.8
-b re
0 0.6
-20 0.4
-40 0.2 -g re
b fe
-60 0
100 200 500 1000 100 200 500 1000
f - FREQUENCY (MHz) f - FREQUENCY (MHz)
MPSH10 / MMBTH10
NPN RF Transistor
(continued)
Test Circuits
Ω
2.0 KΩ Ω
10 KΩ
VCC = 12 V
1000 pF 1000 pF
0.8-10 pF
100 pF
L2
T1
2.0 pF
0.8-10 pF
TUM
1000 pF
L1
Input 5.0-18 pF L1 - L3 turns No. 16 wire, 1/2 inch L x 1/4 inch ID
50 Ω 1000 pF tapped 1 1/2 turns from cold side
L2 - L6 turns No. 14 wire, 1 inch L x 1/4 inch ID
tapped 1 1/2 turns from cold side
680 Ω T1 - Pri. 1 turn No. 16 wire
Sec. 1 turn No. 18 wire
1000 pF
VBB
3
FIGURE 1: Neutralized 200 MHz PG and NF Circuit
50 pF
(NOTE 2) 175 pF
500 mHz Output
Ω
into 50Ω
RFC (NOTE 1) NOTE 1: 2 turns No. 16 AWG wire, 3/8 inch OD, 1 1/4 inch long
NOTE 2: 9 turns No. 22 AWG wire, 3/16 inch OD, 1/2 inch long
1000 pF 1000 pF
Ω
2.2 KΩ RFC
- Vee VCC
TO-92 Packaging
Configuration: Figure 1.0
5 Reels per
(FSCINT) Intermediate Box
Customized
F63TNR Label sample
Label
LOT: CBVK741B019 QTY: 2000 F63TNR
FSID: PN222N SPEC:
Label
FSCINT Label
10,000 units maximum
per intermediate box
for std option
Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h)
FIRST WIRE OFF IS EMITTER (ON PKG. 92) FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON BOTTOM SIDE ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM FLAT OF TRANSISTOR IS ON TOP
Hd
P Pd
Ha W1
d S
L
H1 HO
L1
WO t
W2
t1
P1 F1
P2 DO
ELECT ROSTATIC
SEN SITIVE D EVICES
D4 D1
D3
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
SOT-23 Packaging
Configuration: Figure 1.0
3P 3P 3P 3P
SOT-23 Packaging Information
Standard
Packaging Option D87Z
(no flow code)
Packaging type TNR TNR SOT-23 Unit Orientation
Qty per Reel/Tube/Bag 3,000 10,000
Reel Size 7" Dia 13"
Box Dimension (mm) 187x107x183 343x343x64
343mm x 342mm x 64mm Human Readable Label
Max qty per Box 24,000 30,000
0.0082 0.0082
Intermediate box for L87Z Option
Weight per unit (gm)
Weight per Reel (kg) 0.1175 0.4006
Note/Comments
H uman readable
Label
187mm x 107mm x 183mm
SOT-23 Tape Leader and Trailer Intermediate Box for Standard Option
Configuration: Figure 2.0
Carrier Tape
Cover Tape
Components
Trailer Tape Leader Tape
300mm minimum or 500mm minimum or
75 empt y poc kets 125 empty pockets
E1
F W
E2
B0 Wc
Tc A0
P1
K0
User Direction of Feed
Pkg type A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc
SOT-23 3.15 2.77 8.0 1.55 1.125 1.75 6.25 3.50 4.0 4.0 1.30 0.228 5.2 0.06
(8mm) +/-0.10 +/-0.10 +/-0.3 +/-0.05 +/-0.125 +/-0.10 min +/-0.05 +/-0.1 +/-0.1 +/-0.10 +/-0.013 +/-0.3 +/-0.02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C). 0.5mm
20 deg maximum maximum
Typical
component
cavity 0.5mm
B0 center line maximum
Typical
Sketch A (Side or Front Sectional View) component Sketch C (Top View)
A0 center line
Component Rotation Component lateral movement
Sketch B (Top View)
SOT-23 Reel Configuration: Figure 4.0 Component Rotation
W1 Measured at Hub
Dim A
Max
Dim C
See detail AA
Dim D
W3 min
DETAIL AA
Reel
Tape Size Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)
Option
7.00 0.059 512 +0.020/-0.008 0.795 2.165 0.331 +0.059/-0.000 0.567 0.311 – 0.429
8mm 7" Dia
177.8 1.5 13 +0.5/-0.2 20.2 55 8.4 +1.5/0 14.4 7.9 – 10.9
13.00 0.059 512 +0.020/-0.008 0.795 4.00 0.331 +0.059/-0.000 0.567 0.311 – 0.429
8mm 13" Dia
330 1.5 13 +0.5/-0.2 20.2 100 8.4 +1.5/0 14.4 7.9 – 10.9
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
DISCLAIMER
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.
Definition of Terms
Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Rev. G
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
Authorized Distributor
Fairchild Semiconductor:
MMBTH10