Professional Documents
Culture Documents
Two-stage ejector
More efficient ejector
Suction
flow rate 50 % increased
∗ 1) Compared with SMC single stage ejector
∗1
Air
consumption 30 % reduced ∗1
Two-stage ejector
First ejector Second ejector Flat type
with groove
Strainer SUP
Prevents access of contamination
through the pad suction port.
Silencer
Improved ease
∗2
of removal
With groove
Dents and bumps on the adsorption surface
prevent the workpiece from sticking to it.
This facilitates easy removal.
Ejector silencer
By dispersing the exhaust in all directions,
undesired exhaust noise can be silenced while still
exhibiting maximum vacuum performance.
Ports for Vacuum release, Pressure sensor, Daisy-chain piping Daisy-chain vacuum piping is possible.
<Daisy-chain
Daisy-chain
y-chain piping exampl
example>
ex
Shot-blasted
Micro-dents and bumps are formed on the adsorption surface.
Workpieces can be removed easily.
ZHP Series
14-EU632-B-UK
ZHP Series
Easier maintenance
Mounting with the lock plate reduces
the pad replacement work steps!
Lock plate
q
Remove the lock screw
and slide the lock plate.
Lock screw
Uses an isolated structure.
¡The lock plate is used to facilitate separation.
¡Rubber and metal parts can be disposed of separately. Holder
Holder
Pad
Plate
Nozzle nominal
Pad diameter Pad form Pad material Mounting
size ∗2 [mm]
Metric size (Male thread/Female thread)
Ø 63 Bellows type NBR (Black) ∗1 M8 Ø 0.7
with groove Silicone rubber (White) M10 Ø 1.0
Flat type Urethane rubber (Brown) Inch size (Male thread/Female thread) Ø 1.2 ∗1 Refer to the back cover for
Ø 80 with groove FKM (Black) ∗1 5/16-18UNC Ø 1.5 identification method.
3/8-16UNC ∗2 With ejector
Application Examples
Robot handling Automobile Case packer
Palletizing
1
Vacuum Pad with Ejector
ZHP
Ø 63, Ø 80
Series RoHS
How to Order
Weight
Material: NBR, Mounting: A [g] q Weight Difference by Mounting Style [g]
ZHP63BMNA-첸C6S 184 B C D E F G H
ZHP80BMNA-첸C6S 224 20 −5 14 7 25 1 11
ZHP63UMNA-첸C6S 167
ZHP80UMNA-첸C6S 175 w Weight Difference by Material [g]
앫 For the ZHP첸첸첸A-00 (without ejector), weight shown above –12 g. Pad diameter/form Silicone rubber Urethane rubber FKM
앫 When the mounting symbol is other than “A”, add the weight q shown in the table on ZHP63BM −2.9 0 20.3
the right to the weight described in the table above. ZHP80BM −5.0 0 35.1
앫 When the material is other than NBR, add the weight w shown in the table on the ZHP63UM −1.5 0 10.6
right to the weight described in the table above.
ZHP80UM −2.1 0 15.5
앫 This weight includes the accessory weight.
2
ZHP Series
−90 90
Suction flow [l/min(ANR)]
Vacuum pressure [kPa]
−90 90
Suction flow [l/min(ANR)]
Vacuum pressure [kPa]
−90 135
Suction flow [l/min(ANR)]
Vacuum pressure [kPa]
3
Vacuum Pad with Ejector ZHP Series
Construction
r Component Parts
No. Description Note
e u 1 Stud
2 Strainer
w q 3 Mounting bracket
2 pcs. included for male thread mounting
A A 4 Lock nut
(Not included for female thread mounting)
5 Lock pin
6 Check valve
7 Lock plate
!0
o Replacement Parts
i No. Description Part no. Note
8 Pad ZP3E-첸첸첸 Flat/Bellows type with groove
9 Plate
!2 t !3 A-A !4 ZHP1-PL첸-A
10 Holder
TB00148 Included for metric size
11 Plug∗
TB00055 Included for inch size
12 One-touch fitting KJH첸-C2
13 Ejector assembly ZK2-EJ첸W-A
!1 14 Silencer assembly ZHP1-SA1-A
y 15 Lock screw CA00284 Included
∗ 3 pieces are included in one product. (The part numbers are for 1 piece.)
!5
Pad form
BM Bellows type with groove !2 One-touch fitting (The order lot is 10 pieces.)
UM Flat type with groove
KJH 06 C2
Pad diameter
Applicable tubing O.D.
63 Ø 63
80 Ø 80
04 Ø4
06 Ø6
∗ When changing the
03 Ø 5/32"
pad diameter, replace
also the plate.
07 Ø 1/4"
!3 Ejector assembly
ZK2 EJ 10 W A
Nozzle nominal size
07 Ø0.7
10 Ø 1.0
12 Ø 1.2
Bellows type with groove Flat type with groove 15 Ø 1.5
4
ZHP Series
Dimensions
PD port 1
P port
L
6.2
G
10
6.2
7.8
F
Lock screw
E
7.3 1.4
Ø 14.4
A
B
C
D
N 30 69.7
Silencer
EXH.
P
In the case of Flat type
Ø15
24.7
F
E
A
PD port 3 6.2 C
K D
PD port size
Metric size: Rc 1/8
Inch size: NPT 1/8
Supply Port
Dimensions [mm] Dimensions [mm]
A B C D E F N
ZHP63BM Ø 26 Ø 45.8 Ø 63 Ø 68 12.5 33.8 C4 4.7
ZHP80BM Ø 28 Ø 57 Ø 80 Ø 85 18 41.8 C6 4.7
ZHP63UM Ø 26 — Ø 63 Ø 66 5 20.3 N3 4.7
ZHP80UM Ø 26 — Ø 80 Ø 83 5 20.3 N7 7.3
1 . Use the product while strictly observing the 6. Replace the pad while referring to the figure below.
precautions on vacuum equipment and taking the Lock plate
safety into consideration. Additionally, select a pad Lever on ejector side
size and material suitable for the workpiece to be
adsorbed and the operating environment. Take w
Lock plate
safety measures so that any accident, such as
Lock screw
workpiece drop does not occur during adsorption
transfer. For details, refer to the Best Pneumatics Adapter plate
No. 4 catalogue. t
q
2 . After the pad has been replaced, lock the lock plate
completely before use. (Refer to q shown in the Holder
figure below.) If the lock plate is not locked y
Non-rotating hole
completely, the pad may drop due to the vibration or
Plate
load during operation.
3 . To ensure the safety, be sure to mount the lock Pad assembly
screw on the lock plate before use. (Refer to w
shown in the figure below.) If the lock plate comes
off during operation, this may cause a serious
accident, such as pad drop or workpiece drop.
Pad
Locking status: e
Acceptable
- Lock plate 2 Lock screw r
Stud assembly
Unlocked
8 . When supplying the vacuum release air to the PD 11. Circuit examples
port, select an appropriate product suitable for the ZHP ZHP
(With ejector) (Without ejector)
specifications so that the R port of the 2 port or 3 EXH.
P
port valve is blocked and does not leak.
9. When using the male thread mounting type product, PD3 PD1 PD1
Air filter Regulator Supply valve
do not loosen the bottom nut shown in the figure PD3
below. (The bottom nut is intended to secure the Circuit without release valve
(Usage example of vacuum connection) V PD2 V PD2
connection between the bracket for the adapter
connection and the male thread.)
Supply valve
EXH.
P
Pressure sensor
Do not loosen this nut. Male thread
Adapter connection bracket PD3 PD1
P